Installation and operating instructions Refrigerator with pull-out drawer

Transcription

1 Installation and operating instructions Refrigerator with pull-out drawer GB KIUe 5008

2 KIU -Auszug

3 Operating and control elements 1 On/off and temperature control We recommend a medium setting. 2 Door switch for interior light 3 Temperature display* 4 Supercooling button* 5 Supercooling lamp* showing active function Congratulations on your purchase. In choosing this appliance you have opted for all the benefits of state-of-the-art refrigeration technology which will guarantee you a top quality product with a lengthy, reliable operating life. The equipment in your appliance will provide you with optimum operating comfort every day. This appliance is manufactured in environmentally-friendly processes using recyclable materials. This enables you and us to both play an active role in preserving our environment. In order to get to know all the benefits of your new appliance, please read the information in the oper-ating instructions through carefully. We wish you much pleasure with your new appliance. GB Keep the operating instructions in a safe place and pass them on to the next owner of your appliance where applicable. The operating instructions apply to several models. Differences may therefore occur. Type/Data plate 1 Type designation 2 Service number 3 Appliance number Description of appliance and equipment Butter and cheese dish* Egg tray* Adjustable shelf dividers* Pull-out shelves Temperature control and interior light Type/Data plate Pull-out shelf for raw and cold meats Bottle compartment Pull-out drawer with tray insert for vegetables and bottles Ventilation grille Contents Page Operating instructions Description of appliance and equipment Safety instructions and warnings Connecting to the mains Operation Switching the appliance on and off Setting the temperature Cooling Example of food arrangement Defrosting and cleaning Interior light Notes on energy-saving Malfunctions Customer service and type plate Installation instructions General information Installation information Door assembly and attachment Adjustable-height feet KIU -Auszug 11

4 1 Safety instructions and warnings Disposal notes The packaging is made of recyclable materials. - Corrugated board/board - EPS moulded parts - Polythene sheets - Polypropylene straps Keep packaging materials away from children - polythene sheets and bags can cause suffocation! Please return the packaging to an official collection point. Your old appliance: This contains some reusable materials and should be disposed of properly - not simply with unsorted household refuse. Discarded appliances should be disabled: Remove the plug, cut through the connection cable and render the catch unusable so that children cannot become trapped inside. Ensure that the refrigerant circuit is not damaged when the appliance that is no longer needed is taken away for disposal. Details of the refrigerant can be found on the type plate. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws. Technical safety W To prevent injury or damage to the unit, the appliance should only be transported wrapped and set up by two people. W The refrigerant R 600a is environmentally friendly but flammable. W Do not damage the refrigerant circuit pipes. Splashes of refrigerant can harm your eyes or ignite. W If refrigerant escapes, remove all naked flames or sources of ignition in the vicinity of the leak, disconnect the appliance from the mains and ventilate the area well. W In the event that the appliance is damaged, contact the supplier immediately before connecting to the mains. W To guarantee safe operation, ensure that the appliance is set up and connected as described in these operating instructions. W Disconnect the appliance from the mains if any fault occurs. Pull out the plug (not by pulling on the mains cable) or switch off or remove the fuse. W Any repairs and work on the appliance should only be carried out by the customer service department, as unauthorised work could prove highly dangerous for the user. The same applies to changing the mains power cable. Safety during use W Do not store explosives or sprays using combustible propellants such as butane, propane, pentane, etc. in the appliance. Electrical components might cause leaking gas to ignite. You can identify such sprays by the printed contents or a flame symbol. W Only store high-percentage alcohol in tightly sealed, upright containers. W Do not allow naked flames or ignition sources to enter the appliance. W Do not use electrical appliances inside the appliance (e.g. steam cleaners, heaters, ice makers, etc.). W Do not stand on the plinth, drawers or doors or use them to support anything else. W This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given initial supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. W Avoid prolonged skin contact with cold surfaces or chilled/frozen food. This could cause pain, numbness and frostbite. In the case of prolonged skin contact, protective measures should be taken, e.g. gloves should be worn. W Do not consume food which has been stored for too long, as it could cause food poisoning. Installation and ventilation information W Do not install in an area which attracts direct sunlight, adjacent to an oven, heating or similar. W Do not block the ventilation areas. Always ensure that the appliance is properly ventilated. Refer to the appendix in the installation instructions. W Standard EN 378 specifies that the room in which you install your appliance must have a volume of 1 m 3 per 8 g of R 600a refrigerant used in the appliance, so as to avoid the forma-tion of inflammable gas/air mixtures in the room where the appliance is located in the event of a leak in the refrigerant circuit. The quantity of refrigerant used in your appliance is indicated on the type plate on the inside of the appliance. W Condensation may form on the outside of the refrigerator/freezer during periods of high humidity. Constant ventilation of the installation site is recommend. Connecting to the mains Power supply (AC) and voltage at the operating point must comply with the details on the type plate. The type plate is located on the inside left of the appliance. W Connect the appliance with a properly earthed fused plug and socket only. W The socket must be fused with a 10 A fuse or higher, it must be away from the rear of the appliance and must be easily accessible. W Do not - connect to stand-alone inverters, - operate with so-called energy-saving plugs - this can damage the electronic system, - connect to the supply with other equipment using an extension cable - risk of overheating. W When removing the mains cable from the back of the appliance, remove the cable holder so as to avoid vibration noise. The wires in the mains lead are coloured in accordance with the following code: green/yellow = earth, blue = neutral, brown = live. Warning! This appliance must be earthed. Non-rewireable plugs BS 1363 If this machine or appliance is fitted with a non-rewireable plug, the following information applies: If the socket outlets are not suitable for the plug supplied with this product, it must be cut off and an appropriate plug fitted. The plug cut from the flexible cord should be disposed of and on no account be inserted into a 13 A socket else-where in the house (electric shock hazard). The fuse cover must be re-fitted when changing the fuse, and if the fuse cover is lost the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of the plug fitted). The correct rating of the replacement fuses that are ASTA approved to BS 1362 should be fitted. Replacement fuse covers may be purchased from your local electrical suppliers, electricity showroom or approved service agent. 12 KIU -Auszug

5 2 Operation You are advised to clean the appliance before switching it on for the first time (see "Cleaning") Switching the appliance on and off W Turn temperature control 1by turning clockwise from "0" to "1". - The interior light switches on. - The number 8 will flash briefly in the display* 3, then one segment will light up. The refrigerator compartment temperature will not be displayed until the appliance has been switched on for a while. W To switch off: Turn the temperature control 1to "0" - the interior light and display* will switch off. Setting the temperature W Turn the temperature control 1. The positions indicate the following: Setting "1" = warm, lowest cooling setting Setting "7" = cold, highest cooling setting W We recommend a medium setting. Note: Please bear in mind that the temperature inside the refrigerator depends on how often the door is opened, how full the refrigerator is and the temperature in the room in which it is installed. Adjust the control as necessary to obtain the required temperature. The temperature display*, 3, shows the average refrigerator temperature. - When starting up for the first time or when the appliance is warm, a dash will appear until the temperature reaches a level that can be displayed (between 0 and 9 C). - Because of the natural circulation of the air, it is colder just above the bottom glass shelf and warmer in the top part of the refrigerator; this should be taken into account if comparative measurements are taken. Supercooling* 4: The Supercooling button switches the refrig-erator compartment to maximum cooling. This is recommended particularly if you wish to cool large quantities of fresh food or drinks as fast as possible. The refrigeration temperature drops to the level of the coldest temperature control setting. W Switching on/off: Press the Supercooling button 4 briefly so that the control lamp 5comes on (dark = off). Note: The Supercooling function uses more energy. After approx. 6 hours, however, the electronic system automatically switches back to normal energy-saving operation. 3 Cooling As a result of the natural circulation of the air in normal operation, the temperature in the refrigerator compartment is not uniform. This can have advantages for storing different types of food. Just above the vegetable bin and at the back of the refrigerator, the air is colder, ideal for raw meat or cold meats. At the top front of the compartment, the air is warmer, making it ideal for cheese and for spreadable butter. For this reason food should be stored as shown in the "Example of food arrangement". Ensure that the food is not packed too closely together so that the air can circulate freely. Example of food arrangement 1 butter, cheese, eggs, preserves, jam 2 dairy products, pre-cooked meals 3 raw meat, fish, cold meats 4 fruit, vegetables, salad 5 drinks, bottles Notes - Food which gives off or absorbs odours and flavours, and liquids should always be stored covered or in closed containers. High-percentage alcoholic drinks should be tightly sealed and stored upright. - Reusable plastic, metal, aluminium and glass containers can be used for wrapping. - Always store food which gives off or is sensitive to ethylene gases such as fruit, vegetables and salads separately or wrapped in order not to affect their storage life; e.g. do not store tomatoes together with kiwis or cabbage. - Always allow hot food and drinks to cool to room temperature before placing in the appliance. Adjustment of shelf dividers The shelf dividers can be adjusted to accommodate items of different sizes. To remove, hold the divider, press it gently to the rear and disengage. To replace, position the divider carefully and push in until it engages. GB KIU -Auszug 13

6 4 Defrosting and cleaning Notes on defrosting The appliance defrosts automatically. The water that forms on the rear wall drains into an evaporation container in the plinth and evaporates automatically through the compressor heat. Droplets of water on the rear wall are completely normal. Ensure that the water can flow freely through the drain hole in the bottom of the refrigerator compartment. Cleaning Always disable the appliance for cleaning. Disconnect from the mains or unscrew or switch off the fuse. W Clean the appliance regularly. Clean the inside and equipment by hand with lukewarm water and a little detergent. Because of the risk of injury and damage to the appliance, steam cleaning equipment should not be used. Never use abrasive or acid cleaners or chemical solvents. We recommend using an all-purpose cleaner with a neutral ph value. W The butter dish* can be washed in a dishwasher. The shelves and other parts should be washed by hand as they are not dishwasher proof. W Clean the drain hole in the bottom of the refrigerator compartment frequently. If necessary, clean with a thin object, e.g. cotton swab or similar. W Clean the ventilation grille regularly with a brush or vacuum cleaner. Dust deposits increase the energy consumption. W Ensure that no cleaning water is allowed to run into the drain gulley or penetrate into the electrical components or ventilation grille. 5 Interior light Interior light If the interior light does not work, the bulb may be defective. Changing the bulb: W Bulb data: max. 15 W, voltage and current should agree with the details on the type plate, bulb fitting: E 14. W Switch off the appliance. Pull out the plug or switch off/unscrew the fuse. W Reach inside the lamp cover 1, press upwards at the front and remove cover to the side 2. W Replace the bulb 3. W Replace the cover and click into position. Notes on energy-saving W Protect the appliance from direct sunlight as the energy consumption will increase unnecessarily if the ambient temperature is too high. W Ensure that the ventilation spaces are free. W Avoid opening the door unnecessarily for long periods of time. W Store food logically. Do not exceed the storage periods given. W Keep all food properly wrapped and covered; this avoids condensation. W Allow hot food to cool to room temperature before storing it in the appliance. W The appliance operates more economically if it is properly filled. The shelves can be removed for cleaning: W Press the shelf dividers gently to the rear to remove. Proceed in reverse order to replace. W The large pull-out shelves can be removed by lifting at the front and pulling out. To replace the shelf, position it at the back and then lower it at the front. W The small pull-out shelf above the vegetable bin is removed by raising the left-hand side and then lifting out. To replace it, position the right side first and then lower the left side. W The bottom drawer can also be removed if necessary. Prise off the 4 cover caps with the blade of a knife, slacken the 4 screws and lift the drawer out. Proceed in reverse order to replace. If the appliance is to be left out of operation for any length of time, empty it, disconnect from the mains or set the temperature control to "0", clean as described above and leave the door open in order to avoid unpleasant smells. 14 KIU -Auszug

7 6 Malfunctions Your appliance is designed and manufactured for a lengthy, reliable operating life. If a malfunction nonetheless occurs during operation, check whether it is due to an operating error. Please note that during the warranty period the resultant servicing costs in this case will have to be borne by the owner. You may be able to rectify the following faults by checking the possible causes yourself: W Appliance is not working: - Is the appliance switched on properly? - Is the plug correctly fitted in the socket? - Is the socket fuse intact? W The interior light does not work: - The temperature control is set to "0". - The bulb is defective. Replace the bulb as described in "Interior light". W Loud running noise: - Is the appliance standing firmly on the floor, or does the compressor cause nearby items of furniture or objects to vibrate? If necessary, move bottles and containers apart. - Burbling noises are normal. These are caused by the refrigerant flowing round the refrigerant circuit. A short clicking sound: This will be heard whenever the refrigeration unit (the motor) switches on or off automatically. Motor noise: This will be slightly louder for a brief period when the refrigeration unit switches on. W The refrigeration temperature is not low enough: - Is the temperature set properly? If necessary, set at a lower temperature. - Does the door close properly? - Is the appliance built in properly? - Is it sufficiently well ventilated? Clear ventilation grilles if necessary. - Is the ambient temperature too hot? (See "Safety regulations") - Has the appliance been opened too often or left open too long? - If applicable, wait until the appliance reaches the required temperature itself. Customer service and type plate If none of the above causes apply and you cannot rectify the fault yourself, please contact your nearest customer service department (see enclosed list for addresses). State the type designation 1, service number 2and appliance number 3, so as to ensure rapid, accurate servicing. The type plate is located inside the appliance on the lefthand side. Installation instructions General information - The appliance is suited only for cooling food. In the case of commercial food cooling, the pertinent statutory regulations have to be observed. The appliance is not suited for storing and cooling pharmaceuticals, blood plasma, laboratory preparations or similar substances and products subject to the Medical Devices Directive 2007/47/EC. Any misuse of the appliance may result in damage to or spoilage of the stored goods. Furthermore, the appliance is unsuited for use in areas exposed to an explosion hazard. - This appliance is set to operate within specific ambient temperature limits according to its own specified climate rating. These temperature limits should not be exceeded. The correct climate rating for your appliance is indicated on the type plate. This is explained as follows: Climate rating SN N ST T Set for ambient temperatures of +10 C to +32 C +16 C to +32 C +16 C to +38 C +16 C to +43 C - The refrigerant circuit has been checked for leaks. - When installed, this appliance corresponds to the relevant safety provisions and EC directives 2006/95/EC and 2004/108/EC. Installation information The appliance is designed for integrated use in a row of base units. - Do not install the appliance near a cooker, radiator or other source of heat. - Ventilation and air extraction takes place via the plinth. NB: - There must not be any openings in the surrounding units. Close the recess with a rear wall of a unit or make sure the side wall and the worktop are flush with the kitchen wall (only leave a small opening to allow the cable and the plug through). This helps to avoid leaking current, which is important so as to ensure that the refrigeration unit and the appliance work properly. - The maximum unit door weight must not exceed 8 kg! - The lower pull-out drawer (fruit and vegetable compartment) takes a maximum load of 12 kg. W Check the installation dimensions according to fig. A. - Installation height, plinth height and depth can be varied. Installation height Plinth height/ventilation and air extraction 870 mm recess mm (at least 120 mm for appliances in climate rating ST and T*), variable depending on height of unit door 920 mm recess mm (at least 170 mm for appliances in climate rating ST and T*), variable depending on height of adjustable feet and unit door The plinth depth can be varied from 22 to 77 mm. GB KIU -Auszug 15

8 Installation instructions Installation and fitting W Fig. A: Align the appliance vertically and horizontally by adjusting the adjustable feet using a 30 mm spanner or a size 2 screwdriver. - For 920 mm recess: Lengthen the adjustable feet by about 50 mm. W Place the mains cable in such a way that it can be connected to the mains after installation. W Position the appliance being installed on the slides 3 and push it into the recess. This makes installing or removing the appliance easier. W Slide the appliance into the recess until the fronts are flush with the sides of the unit walls. W Fig. B1: Screw the appliance to the worktop using screws 4. W All installation components are supplied W If the appliance is installed without kitchen unit door (the appliance door stays white), then - remove the attachment strut 7, Fig. A and - press the accompanying stoppers 2 into the holes in the door: to do so, puncture the PE silver layer in the holes with a pointed instrument. Adjusting the plinth depth W Fig. C: Unscrew screws 5by turning about 10 revolutions anti-clockwise. W Fig. D: Holding the ventilation grille 6on both sides, pull forwards and align to match the surrounding units or, if there is a continuous plinth panel, fit into plinth. - Cut a panel out of the continuous plinth panel for the ventilation and air extraction grille and fit as per fig. D: a) plinth height mm for 870 mm installation height b) plinth height mm for 920 mm installation height Make sure the ventilation slots are not covered. W Fix appliance plinth using screws 5: Tighten screws clockwise until they meet noticeable resistance, fig. C. Fitting the unit door W Fig. E1: Check the 8 mm default setting (distance between appliance door and bottom edge of attachment strut 7). W Fig. H: Suspend the unit door on the door of the appliance/adjusting pins bl. Screw the counternuts 9 loosely onto the adjusting pins. Close the door. W Fig. H: Align the unit door flush with the surrounding unit fronts: align laterally (X) by sliding in the corresponding direction, adjust height (Y) and lateral tilt with the adjusting pins blusing a screwdriver. W Fig. J1: Check the distance between the door and the surrounding units. - Tighten the counternuts 9slightly with a ring spanner bm. W Fig. J: Fold down the flaps on the pre-fitted attachment bracket bn. - Screw bothe appliance door onto the unit door with the attachment brackets bn: - Drill attachment holes (making a hole with a bradawl) and screw tight. W Adjust the depth of the unit door (Z): - Fig. H1: top: loosen the cross-headed screws bp. - Fig. J: bottom: Loosen the screws bqon the pre-fitted attachment bracket and relocate the door. - Fig. J1: Allow an air gap of approx. 2 mm between the unit door and the body of the unit. Do not allow knobs and sealing lips to make contact with the appliance as this can have a detrimental effect on its function. W Check that the door is properly positioned, and readjust if necessary. Tighten all screws. - Fig. J2: Tighten the counternuts 9with the ring spanner bm provided, holding the adjusting pins blin position with a screwdriver. W Fig. G: Place the top cover br in position and click into place. Fold up the flaps on the attachment bracket Adjusting appliance door, fig. K (only if necessary,) W Slacken screws bs right and left but do not remove. W Adjust door angle with set screw bt and height with set screw bu. W Fasten appliance door with screws bs. W Fig. E: Slide the fitting aids 8up level with the unit door: underside of stop edge of fitting aid = upper edge of unit door. W Suspend the attachment strut 7on the unit door: - Remove the counternuts 9. - Fig. F: Suspend the strut with the fitting aids on the inside of the unit door and align centrally (draw a short line in the middle of the unit door, align the arrow on the strut with it keeping the same distance to outer edges on left and right). W Fasten the attachment strut 7in the centre: - Fig. F: with at least 6 screws if the doors are made of wood board, - with 4 screws round the edge in the case of panel doors. - Lift the fitting aids 8 out to the top, turn round and insert into the adjacent openings. All types and models are subject to continuous improvement and the manufacturer therefore reserves the right to make modifications in the shape, equipment and technology. 16 KIU -Auszug

9 GB KIU -Auszug 17

10 Liebherr Hausgeräte Ochsenhausen GmbH * Memminger Strasse 77-79*88416 Ochsenhausen * Deutschland *