MODEL AMS 39-VRM GLASS FRONT OUTDOOR MERCHANDISER ILLUSTRATED PARTS MANUAL L0088 REV H

Transcription

1 MODEL AMS 39-VRM GLASS FRONT OUTDOOR MERCHANDISER ILLUSTRATED PARTS MANUAL L0088 REV H AUTOMATED MERCHANDISING SYSTEMS INC 255 WEST BURR BLVD. KEARNEYSVILLE, WV Fax info@amsvendors.com AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , INTERNATIONAL A.M.S. S DE RL DE CV KM. 9 CARR. AL CASTILLO NO MPIO. DE EL SALTO, JAL. MEXICO Fax servicio@amsint.com.mx 2

2 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H THIS PAGE INTENTIONALLY LEFT BLANK 3

3 AMS Glass Front Outdoor Merchandiser Illustrated Parts Manual Model AMS 39-VRM Table of Contents SECTION PAGE INTRODUCTION Table of Contents General Introduction 3 Manual Organization 3 Merchandiser Identification 4 Patent Disclosure 5 Publication Notice 5 CABINET PARTS CHILLER DOOR PARTS Cabinet and Additional Parts Illustration 6 Cabinet Screens Illustration 0 Chiller Parts Illustration Side View 2 Chiller Parts Illustration Top View 4 Coin Bay Door Illustration 6 Door, Internal Hinges, Lighting and Glass Illustration 8 Door, External Front and Sides Illustration 20 Door, Product Hopper Illustration 22 POS Display Illustration 24 ELECTRICAL HARNESSES ILLUSTRATIONS 26 TRAYS AND PARTS.5 Helix Tray Illustration 42 Bottle Tray Illustration 44 Snack/Candy/Food Tray Illustration 46 Scrolling Price Snack Tray Illustration 48 Horizontal Can Tray Illustration 50 Helix Illustrations 52 4 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX ,

4 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H THIS PAGE INTENTIONALLY LEFT BLANK 2

5 GENERAL INTRODUCTION The purpose of this manual is to give our customers a way of identifying major service parts for repair and replacement. The illustrations and parts list in this manual are for identification only. Some optional parts are also shown. Illustrations of these major parts are keyed with our part numbers. The illustrations help identify the general design, position and orientation of these parts. The note section may also give important information. Please refer to the section on merchandiser identification on the following pages. Without the model style and serial number it may be difficult to identify the required part. Parts should be ordered from your distributor. It is our intent to assist our customers with up-to-date documentation. However, this manual may not show all parts, variations or changes. Some parts may be shown out of scale. This manual is itself subject to change without notice. If any errors are found, please notify AMS so the correction can be included in later revisions. Engineering data and third party information are generally not included. The graphical data, group assembly data, parts, part assembly, parts breakout information and tabular data conveyed by this manual is proprietary and belongs to AMS, and holders without prior consent of or without knowledge of and by AMS must surrender this data immediately. All measurements are in inches except where specified as Metric. MANUAL ORGANIZATION This manual is divided into general sections. Each section is further divided into the various subsections or subassemblies. These lead off with one or more illustrations showing the parts and each part is identified with a number. Note that some part numbers are for assemblies fabricated as a unit at AMS and are replaceable only as a unit. Also, other part numbers identify optional parts which may or may not have been contracted for and factory installed by AMS. The part number in the illustration is listed with the description or title for that part. In some instances there may be multiple parts to choose from. The correct service or repair part for the style of merchandiser must be selected. A quantities column in the list indicates quantities required. There is a note section where additional information may be found. This manual contains additional and new information for a vendor as currently manufactured. Older revisions of this manual should be kept with older vendors. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 3

6 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H MERCHANDISER IDENTIFICATION When requesting service, replacement parts or technical assistance, please use the Model Number and the Serial Number with Date Code, found on the Serial Plate (Refer to Figure below) affixed to the merchandiser. The plate is usually located inside the window. The information contained on this plate is necessary to determine what parts, kits, or maintenance apply to your vendor. Model Number Breakdown AMS 39 VRM Manufacturer Cabinet Model Width Figure Typical Serial Plate AMS 39-VRM means it is an Automated Merchandising Systems, 39 wide Vandal-Resistant Merchandiser. Example of Serial Number Breakdown Built Year Month Sequence On all AMS serial numbers, the first digit identifies where a merchandiser was manufactured. Those merchandisers built in the U.S. start with the number. Those merchandisers built in Mexico start with the number 2. The next two digits identify the year of manufacturer. These numbers are 09 for (2009) and so forth. The next two digits identify the month. The first month of the year is 0 and the last month is 2. The last four digits identify the numbers assigned to each merchandiser during assembly. Numbering starts with 0000 and continues through 9999, whereupon these four digits start over. An example of the numbering system in use is as follows: This merchandiser was manufactured at the Kearneysville, W.V. plant in 2009, in February, and was the 56 th merchandiser manufactured. 4

7 PATENT DISCLOSURE This merchandiser and/or certain of its components are covered by one or more of the following U.S. and international patents; U.S. PATENTS: 6,45,699; 6,384,402; 6,520,373; 6,708,079; 6,794,634; 7,9,95; 7,343,220; 7,742,837; 7,446,302; 8,003,93 CANADIAN PATENT: 2,329,34. MEXICO PATENT: L0088, Revision H, 3790, 7/29/6 PUBLICATION NOTICE It is our intent to assist our customers with up-to-date documentation: however, this manual may not contain all updates and is subject to revision without notice. Please contact our Service Department with your requests or comments. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 5

8 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H CABINET AND ADDITIONAL PARTS ILLUSTRATION 6

9 CABINET AND ADDITIONAL PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTES 2862 Assembly Cabinet, Outdoor Vendor (39 ) 3000 Sheet Metal Screw TEK # (As Needed) Nut, 8-32, Hex, Machine Screw 9 For Attaching Power Harness Screw, 5/6-8, Type F 6 4 Per Leg Rivet, Pop, Steel, /8 x /4 Grip 0 (As Needed) Washer, #0 SAE Flat 4 For Power Harness and Door Stop Cable Sheet Metal Screw, TEK Screw, 0-32 x 3/4 Phillips Pan Head 2 For Door Stop Cable 20277, Not Shown Nut, 0-32 w/nylon Insert 2 For Door Stop Cable 20277, Not Shown 3067 Spacer,.92 ID x.25 Length x 3/8 Dia. 2 For Door Stop Cable 20277, Not Shown Phillips Head 3-32 Screw Self-Tap, Type 23 For Power Harness 8 33 Pushnut, 3/6 Stud Fuse Holder For 3AG Fast Blow Fuse Only /4 Dia. Pop Rivet, Aluminum, Natural, /4 Grip Length 2 Use For Attaching Anti-Vandal Plates 3284 Power Switch For 24V Circuit Control Leg, Roller Bracket Leg, Leveling 5 Cabinet Must Be Level, Using All Legs Roller, Molded (Nylon) Flange, Right Vertical Cover Plate, Hinge Hole, Ver. 2 For Top Hinge Extension, Left Vertical Rail Mount CONTACT AMS FOR YOUR APPLICATION Bracket, Angle 4 For Attaching Bulkhead Stiffener, Right Vertical Rail Mount Cable Assembly, Door Stop, Modified Plate, Door Switch Spring Assembly, Leg, Left Front with Thread Covers AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 7

10 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H ITEM PART NO. PART DESCRIPTION QTY. NOTES Assembly, Leg, Rear with Thread Covers Shaft, Headed, Roller (Zinc Plated) Rail Mount, Right Vertical, Low Temp Plate, Fuse Holder, Socket And Power Switch Mount Decal, 24V Fuse, Ver Enclosure, Fan Switch, Ver. 2 Uses Normally Open Switch, P/N Rain Cover Plate, Outer Assembly, Leg, Front Hinge With Thread Cover, Outdoor Vendor Assembly, Lock Flange Rail Mount, Left Vertical, Use w/welded Lock Flange Cover Plate, Hinge Hole For Bottom Leg Anti-Vandal Plate, Inner, Outdoor Vendor Plate, Grommet, Wrapper Back, Outdoor Vendor Plate, Wire Bushing, Tank Back Assembly, Right Rail Mount Door Harness, Power Distribution, Outdoor Vendor Not Shown Cover Plate, Fixed, Right Column, 24VDC Power Supply Shipping Board 2 8

11 THIS PAGE INTENTIONALLY LEFT BLANK AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 9

12 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H CABINET SCREENS ILLUSTRATION (Removable) 6 2 0

13 CABINET SCREENS PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTES 2862 Assembly Cabinet, Outdoor Vendor (39 ) Screw, Sheet Metal, TEK Quantities For One Trim Trim, Rear Chiller Hole 39 Steel Trim Holds Screen Screen, Rear Chiller Hole, 4 Mesh /8 x /8 Welded Galvanized Assembly, Condenser Screen Welded Galvanized Screen in Steel Frame Assembly, Condenser Screen Holder Steel Frame Holds Condenser Screen Assembly AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX ,

14 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H CHILLER PARTS ILLUSTRATION SIDE VIEW 2

15 CHILLER SIDE VIEW PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTES 3000 Sheet Metal Screw TEK # Screws, ¼ X ¾, Self Tapping, Hex Head 4 For Attaching to Tank Walls Screws, ¼ X, Self Tapping, Hex Head 4 For Attaching to Tank Floor Evaporator Fan/Motor Assembly, 220V, 50Hz, Phase (VCB/VCF Models) Evaporator Fan/Motor Assembly, 5V, 60Hz, Phase (VCB/VCF Models) Evaporator Cover Plate Note Voltage Evaporator Plenum Contact AMS For Your Application Assy., /2 Plus HP Chiller w/ Dual Row Condenser, Outdoor Assembly, /2, Chiller, 240V 2329 Assembly, Chiller Housing, English (39 ) Assembly, Chiller Housing, Spanish (39 ) SEE NOTE. Contact AMS For Your Application. Housing Must Seal against Cabinet as Shown. Supplied with Access Door Bracket, Temperature Sensor 2862 Cabinet Assembly (39 ) Contact AMS For Your Application Base, Stamped Evaporator Drain Pan For Stamped Pan Assemblies Assembly, Stamped Evaporator Drain Pan Use with 2990, Drain Pan Base. NOTE: Chiller assemblies are charged with refrigerant and are replaceable only as an assembly. The refrigeration system is pressurized and sealed at the factory. Puncturing or cutting any component in the system will cause refrigerant gas and liquid to be propelled out of the system, creating an immediate physical hazard. Use caution to avoid accidentally opening the refrigerant system. It should also be noted that releasing refrigerant to the atmosphere is a federal crime and is punishable by law. Any service work requiring the system to be opened must be performed by a licensed technician using certified recovery equipment. Unauthorized service to the sealed refrigerant system may void the warranty. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 3

16 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H CHILLER PARTS ILLUSTRATION TOP VIEW 4

17 CHILLER PARTS LIST TOP VIEW ITEM PART NO. PART DESCRIPTION QTY. NOTES 3065 Fan, Condenser Assembly, 220V, 50 Hz, Phase 307 Fan, Condenser Assembly, 5V, 60Hz, Phase Note Voltage Sponge (Condenser Drain Pan) Use with 2990, Drain Pan Base Refrigeration Harness Use with Both 5V OR 220V Systems 2290 Assembly, /2 Plus, Chiller, 5V Assembly, /2 Plus, Chiller, 240V Assembly, /2 HP Plus, Chiller w/dual Row Condenser, 240v -Vendtrader SEE NOTE. Contact AMS for Your Application Base, Stamped Evaporator Drain Pan For Stamped Pan Assemblies Condenser, Stamped Evaporator Drain Pan Use with 2990, Drain Pan Base Assembly, Condenser Drain Pan Use with 2990, Drain Pan Base NOTE: Chiller assemblies are charged with refrigerant and are replaceable only as an assembly. The refrigeration system is pressurized and sealed at the factory. Puncturing or cutting any component in the system will cause refrigerant gas and liquid to be propelled out of the system, creating an immediate physical hazard. Use caution to avoid accidentally opening the refrigerant system. It should also be noted that releasing refrigerant to the atmosphere is a federal crime and is punishable by law. Any service work requiring the system to be opened must be performed by a licensed technician using certified recovery equipment. Unauthorized service to the sealed refrigerant system may void the warranty. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 5

18 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H COIN BAY DOOR ILLUSTRATION

19 COIN BAY DOOR PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTE Program Chip Contact AMS for your application 3000 Screw, Sheet Metal TEK Nut, Hex, Machine Screw, # per DBV Opening Rivet, Steel, /4" Grip Length Rivet, Steel, /8", Black, Grip Length /4" PEM Stud- #8-32, Flush Head, PEM Stud- #8-32, Flush Head, " Screw, SEMS, 8-32, 3/8" Stand Off, Circuit Board, Blind Hole 6 For Control Board Trim, Extruded Edge, Trim, Extruded Edge, Door Stiffener, Lower, Low Temp Assy., Door Stiffener Upper Lens, Display, Steel Escutcheon Assy, Display, Steel Escutcheon Assy., Upper Coin Door, Low Temp DBV Cover Plate (Powder Coated) Flat Steel Plate, per DBV Opening Insert, Place Holder, POS Display Diffuser, Place Holder, POS Display Card, AMS, POS Display Assy., Light Box w/standoffs Assy., Coin Box, Short Mounting Panel, Changer, Multi-use, VRM, EPOCH Assy., Scavenger System, Steel Escutcheon, Epoch Coin Box Bulkhead, Epoch Assy., Coin Cup, Vandal Resistant, Epoch Coin Chute, Lower, Epoch Door Frame, Outdoor Vendor, EPOCH II Assy., Coin Chute Upper, Epoch Ver Assembly, Offset Control Board Kit AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 7

20 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H 2 DOOR, INTERNAL HINGES, LIGHTING AND GLASS ILLUSTRATION

21 DOOR, INTERNAL HINGES, LIGHTING AND GLASS PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTE Carriage Bolt, ¼-20, ¾ 4 For Door Hinges Nut, Hex With Lock Washer For Door Hinge Bushing, Plastic Snap 2 For Pass-Through of Harnesses Tape, 3/6"x /2", PVC Foam 36 Seals Between Glass Frame and Door Rivet, Stainless Steel, /8" 7 /8 Diameter, /4 Grip Length Screw, Sheet Metal, TEK8-8, /2", Clear Zinc Screw, Sheet Metal, TEK Hinge, Washer Plate Seal, T-Handle, Low Temp Lock Bolt Alignment Bracket, Low Temp Tray Restraint, Low Temp, Reduced Depth Assy., Top Hinge, /4" Assy., Bottom Hinge, /4" 4 28 Assy., Hinged Window Panel Replaced as an Assembly Only Bracket, Hinge Support Assembly, Tank w/ Tap Plates, Outdoor Assy., Lock Bolt Cover, Low Temp Replaced as an Assembly Only Keeper, Window Latch Latch is on Window Assembly LED Lightbar, 24" LED Lightbar, 42" Mounting Clip, Lightbar 2599 Assy., Enclosure, LED-Pow. Sup. w/ext.(snack, L/T & VRM) Not Shown AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 9

22 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H DOOR, EXTERNAL FRONT AND SIDES ILLUSTRATION

23 DOOR, EXTERNAL FRONT AND SIDES PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTE Assy,. Door, Less Options, Outdoor Vendor, Epoch Carriage Bolt, /4 20, 3/ Nut, Hex, Machine Screw, # For Attaching Escutcheon, Window Trim Rivet, Pop, Steel, /8 x /4 Grip Washer, Flat Steel, SAE STD # /6" Hex Nut 2 For Attaching Lockplate Nut, Hex w/ Lockwasher, 3/8-6 2 For Attaching Lock Cover Assembly Rivet, Aluminum, /4" Natural 2 For Attaching Outer Anti-Vandal Plate Rivet, Aluminum, 3/8" Natural Carriage Bolt, 5/6-8 4 For Attaching Lockplate T-Handle Assembly Lock, T-Handler Cylinder w/002 Keys Trim, Extruded Edge, Long Trim, Extruded Edge, Long Anti-Vandal Plate, Outer Rain Cover Plate, Outer Membrane Switch Mounting Plate, Escut., Steel Plate, Spacer, Steel Escutcheon Anti-Vandal Plate, Inner, Outdoor Assy., Retainer Strip, Corner, Outdoor 4 Inserts into Trim Covers Assy., Retainer Strip, Single, Outdoor 2 Inserts into Short Trim Assy., Lock Cover Recessed T-Handle Button, 0.90' Dia. Round, Escutcheon Plate, Lock Cover DBV Cover Plate (Powder Coated) Seal, Steel Escutcheon, Epoch Trim, Extruded Edge, Window Cover, 26.78" Trim, Extruded Edge, Window Cover, 42.4" Window Cover, Polycarbonate, Outdoor Assy., Steel Escutcheon W/ Keypad, Epoch Includes Escutcheon, Lighted Keypad and Buttons and Display Lens Assy., Lighted Keypad Plate, Lock Cover, R Not Shown Assy., Door, VRM, Standard w/options, Epoch (39 ) Not Shown AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 2

24 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H DOOR, PRODUCT HOPPER ILLUSTRATION

25 DOOR, PRODUCT HOPPER PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTE 3000 Screw, Sheet Metal, Tek Sheet Metal Screw (/4 Hex, Blunt Tip) Rocker Switch Grommet Tape, 3/8" x /4" Urethane Foam Flat Tie Holder Detector, Product Sensor Emitter, Product Sensor Assy., Product Sensor Emitter Optional Item Assy., Product Sensor Detector Optional Item 2625 Cleaning Decal Door Switch Enclosure Lens, Product Sensor Bracket Deflector Panel, Hopper, Outdoor Left Product Kicker w/o Flange Optional Item Right Product Kicker w/o Flange Optional Item Assy, Secondary Delivery Sensor Bracket Assy, Secondary Delivery Sensor Cover Assy, Primary Delivery Sensor Cover Hopper Assembly (39 ) Assy., Primary Delivery Sensor Bracket, Epoch Assy., Vend Door, Outdoor Sensor Extension Primary Sensor Board Add () Sensor Extension Secondary Sensor Board Add () Sensor Extension 2605 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 23

26 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H POS DISPLAY ILLUSTRATION 24

27 POS DISPLAY PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTE POS Display Insert POS Display Diffuser LED Board POS Display Card (AMS) English POS Display Card (IAMS) Spanish Light Box Assembly Bushing, Open/Closed AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 25

28 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H ELECTRICAL HARNESS ILLUSTRATIONS 26

29 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 27

30 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H 28

31 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 29

32 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H 30

33 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 3

34 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H 32

35 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 33

36 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H 34

37 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 35

38 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H 36

39 BLACK WIRE WHITE WIRE BLACK WIRE WHITE WIRE AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 37

40 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H B CONNECTOR W/ RAMP LOCK, MALE, 4 CIRCUIT MOLEX TERMINALS, MOLEX REQUIRED 23.0 " 0" CONNECTOR W/ LOCK, MALE, 2 X 7 CIRCUIT MOLEX TERMINAL, MOLEX REQUIRED.0 PART NUMBER AND REV LETTER HERE.0 SEE NOTE 2 SEE NOTE HARNESS, 2-LINE GRAPHIC DISPLAY 38

41 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 39

42 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H ELECTRICAL HARNESS PARTS LIST PART NO. PART DESCRIPTION NOTES Power Cord Assembly, 5V U.S. & Canada 373 Power Cord, Australia 394 Power Cord, U.K. & Ireland 3208 Power Cord, India & South Africa 2044 Refrigeration Harness 2046 Door Motors Harness Column Tray Harness 2048 Motor Distribution Harness 2054 RFI Filter Ground 2058 Multi-Drop Buss Harness Ballast Assembly Optional Item Evaporator Fan Harness 2070 Transformer and Fuse Harness Dual Transformer Harness Window Heater Transformer Harness 2405 Refrigeration Relay Harness 2425 Delivery Sensor Harness 2426 Delivery Sensor Detector/Emitter Harness 2427 Product Sensor Emitter Harness 2428 Product Sensor Detector Optional Item 285 Harness, Power Distribution, Outdoor Vendor 287 Keypad, Membrane, 3 x 4 Harness is integral with switch 2978 Harness, Ground, Emitter/Detector Display Harness 2468 Temperature Sensor 2485 On/Off Switch Harness Helix Tray Harness 259 Control Power and Refrigeration Harness 2592 Harness, Exec. Mech., Sensit II Optional Item Ground Harness Dual Transformer, No Ballast Harness Relay, Capacitor Harness Lighted POS Power Harness Harness, 2-Line Graphic Display 40

43 THIS PAGE INTENTIONALLY LEFT BLANK AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 4

44 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H.5 HELIX TRAY ILLUSTRATION 42

45 .5 HELIX TRAY ASSEMBLY PARTS LIST ITEM NO PART NO. PART NAME QTY NOTES 3000 Screw, TEK Rivet, Pop, Steel, / Latch, Nylon, Gum and Mint Strike, Nylon, Gum and Mint Motor, w/home Circuit Extrusion, Gum and Mint Rail Extrusion Mount, Upper (Gum and Mint)(Right Side) Extrusion Mount, Upper (Gum and Mint)(Left Side) Extrusion Mount, Lower (Gum and Mint)(Right Side) Extrusion Mount, Lower (Gum and Mint)(Left Side) Extrusion, Price Marker, Reduced Height Rail, Gum and Mint, Reduced Depth (39 )(Right Side) Rail, Gum and Mint, Reduced Depth (39 )(Left Side) Rails To Fit Tray To 39 Cabinet Doubler, Tray.5 Helix Tray Tray Body,.5 Helix Tray Tray Back,.5 Helix Tray Tray Inner Side,.5 Helix Tray 2 Parts Are Factory Assembled As A Unit Tray Inner Section,.5 Helix Tray Tray Inner Mid Section,.5 Helix Tray Divider, Tray,.5 Helix Tray, RH Divider, Tray,.5 Helix Tray, LH Tray Slide Channel,.5 Helix Tray, RH Tray Slide Channel,.5 Helix Tray, LH Helix Adapter,.5 Helix Tray Helix,.5 Tray, Counterclockwise, Black Helix,.5 Tray, Counterclockwise, Black 2 Tray is Equipped With Two Of Each Bracket, Stop,.5 Helix Tray Harness,.5 Helix Tray Deflector Plate,.5 Helix Tray, -/2 CF. Hopper (39 ) RH, Mount On Hopper For.5 Tray Only Deflector Plate,.5 Helix Tray, -/2 CF. Hopper (39 ) LH, Mount On Hopper For.5 Tray Only General Note: The.5 Helix Tray has replaced the Gum and Mint Tray. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 43

46 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H BOTTLE TRAY ILLUSTRATION 44

47 BOTTLE TRAY PARTS LIST ITEM PART NO PART DESCRIPTION QTY. NOTE Screw, Sheet Metal, Type B, Rivet, Pop, Steel, / Bearing, Nyliner, Snap-In 2 Use On 2069 And for Bottle Tipper Washer, Flat Steel, SAE STD #5 For Rivet Reinforcement Protective Cap, Vinyl Obsolete Part Wire Tie, Panel Mount 7 3 Helix Ejector, Small Helix Tape, UHMW Polyethylene, 3/4 X Per Selection Motor, with Home Circuit CW, Use w/coupled Motors Harness, Tray, 0 Column Extrusion, Price Marker, Ver Tray Doubler, Bottle (39 ) Tray Corner, Bottle, Right Use With Without Bottle Tipper Assembly, Bottle Tipper Bar Tray Corner, Bottle Tipper Bar, Right Use With For Bottle Tipper Device, Bottle Alignment Tray Corner, Bottle Tipper Bar, Left Use With For Bottle Tipper Tray Corner, Bottle, Left Use With Without Bottle Tipper Tray Reinforcement, Bottle (39 ) Ver Edge Guard, Tray Corner (Only RH) Use On Without Bottle Tipper Edge Guard, Tray Corner (Only RH) Use On 2069 For Bottle Tipper Tray Divider, Reduced Depth (Square Front) 3.37 High (Optional Part) Tray Body, Bottle, Reduced Depth (39 ') Rail, Bottle Tray, Reduced Depth (RH) Rail, Bottle Tray, Reduced Depth (LH) Bracket, Bottle Tray Rail, Reduced Depth (RH) Bracket, Bottle Tray Rail, Reduced Depth (LH) Helix Adapter, Without Hub Tray Divider, Reduced Depth, Tapered Front 3.37 High Helix, 3 Counter-Clockwise See Helix Description Section For Options Tray Divider, Reduced Depth, Tapered Front, High 4.9 High (Optional Part) Rail Slide, Full Extension, 24 Pair Tray also comes in scrolling price option. Contact your distributor for details. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 45

48 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H SNACK/CANDY/FOOD TRAY ILLUSTRATION Snack Candy Food Tray Illustration

49 SNACK/CANDY/FOOD TRAY PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTE Helix See Helix Table Screw, Sheet Metal, 8-8 Safety Screws for Rails Canoe Clip 2 Per Helix Alignment Device Wire Tie, Standoff Wire Tie, Panel Mount 6 3 Helix Ejector Optional Tray Divider Spring Per Divider Harness, Tray, 0 Column Extrusion, Candy Pusher Per Divider With Cut-outs Bar, Candy Pusher Per Divider With Cut-outs 2064 Label Sheet, Reduced Height Price Edge Trim, Tray Corner Right Hand Corner Only Tray Body, Reduced Depth (39 ) Helix Adapter, Without Hub 238 Tray Divider, VER 2, 3-3/8 High Select Type, Numbers To Form Columns Tray Divider, VER 2, 4-7/8 High Select Type, Numbers To Form Columns Tray Divider, VER 2, 8 High Select Type, Numbers To Form Columns Helix Alignment Device Assembly, Rail, Snack, Right Assembly, Rail, Snack, Left Label Sheet, Reduced Height Location Motor, With Home Circuit CCW Motor, With Home Circuit CW, Use w/coupled Motors AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 47

50 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H SCROLLING PRICE SNACK TRAY ILLUSTRATION (0-Selection Shown) Scrolling Price Tray Assembly, 7/25/6 48

51 SCROLLING PRICE SNACK TRAY PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTE Motor, Counter Clockwise Motor, Clockwise Optional, Use for Coupled Motors Helix See Helix Table Harness, Tray 0 Column Extrusion, Candy Pusher Optional Bar, Candy Pusher Optional Tray Corner, Ver Edge Trim, Tray Corner Right Hand Side Only Tray Body (39 ) Helix Adaptor Per Motor 238 Divider, Standard, 3 3/8 High Divider, High, 4 7/8 High Optional Divider, Extra High, 8 High Optional 2292 Helix Alignment Device Optional Scroll, Price Label, Scroll, Price Label, Select Cover Select Cover, No Windows Optional, For Dual Helix Selection Universal Tray Clip,.75# Canoe Clip Use 2 with Item Wire Tie Standoff Wire Tire, Panel Mount Helix Ejector Optional Location Label AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 49

52 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H HORIZONTAL CAN TRAY ILLUSTRATION X

53 HORIZONTAL CAN TRAY PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTE 3020 Wire Tie Standoff Washer, Flat Nylon, /2 4 Per Selection Wire Tie, Panel Mount, " Standoff Snap Rivet 2 Per Selection Rivet, Steel, 3/6 Dia.,.25 to.25 Grip L Helix, 2.6" CCW, Painted (7-Pitch) Australian Can Helix, 2.6" CCW, Painted (8-Pitch) U.S. and European Can Harness, Tray, 0 Column Per Tray Helix Adapter, w/o Hub Per Selection Motor, W/Home Circuit, CCW (S3) Per Selection Label, Adhesive, Location, Rectangle 2332 Scroll, Price Label, with Decimal Scroll, Price Label, Cover, Scrolling Price, 0 Select Per Selection Cover, S/P, 0 Select, No Windows Per Selection Divider, Horizontal Can Tray Slide Set Set Per Tray. Sold as a Set Only Rail, Slide Mounting, Horizontal Can Tray *Tray also comes in standard pricing option. Contact your distributor for details. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 5

54 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H HELIX ILLUSTRATIONS 52

55 PART NO. HELIX DESCRIPTION * SLOT (VEND) WIDTH HELIX PARTS LIST NUMBER OF SLOTS (PITCH) HELIX OUTSIDE DIAMETER TURNS QTY PER COLUMN Helix, Small CW, Black CW Use With As A Set Helix, Small CW, Black 2 5/ CW Set Use With As A Set Helix, Small CW, Black 2 / CW Use With As A Set Helix, Small CW, Black 7/ CW Set Use With As A Set Helix, Small CW, Black CCW Helix, Small CCW, Black 2 5/ CCW Set Helix, Small CCW, Black 2 / CCW Helix, Small CCW, Black 2 / CCW Helix, Small CCW, Black 7/ CCW Set Helix, Small CCW, Black 7/ CCW Helix, Small CCW, Black 7/ CCW Helix, Small CCW, Black 7/ CCW Helix, Small CCW, Black 7/ CCW Helix, Small CCW, Black / CCW Helix,.5, CCW, Black 5.5 CCW Use in.5 Helix Tray Helix,.5, CCW, Black 9/ CCW Use in.5 Helix Tray 2336 Helix, 3, CCW, Black CCW Bottle Tray 2337 Helix, 3, CCW, Black CCW Bottle Tray Helix, 3.75 CCW, Black 4 / CCW Large Diameter Helix, 3.75 CCW, Black 3 ¼ CCW Large Diameter Helix, 3.75 CCW, Black 2 5/ CCW Large Diameter Helix, 3.75 CCW, Black CCW Large Diameter Helix, 3.75 CCW, Black ¾ CCW Large Diameter Helix, 3.75 CCW, Black ½ CCW Large Diameter Helix, 3.75 CCW, Black ¼ CCW Large Diameter Helix,.5, CCW, Black 7/8 0.5 CCW Use in.5 Helix Tray Helix,.5, CCW, Black 29.5 CCW Use in.5 Helix Tray Helix,.5, CCW, Black / CCW Use in.5 Helix Tray NOTE General Note: Please call AMS if a helix with a special pitch is required. Also, the quantity of helices required depends on the vendor AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 53

56 AMS GLASS FRONT OUTDOOR MERCHANDISER, MODEL AMS 39-VRM, ILLUSTRATED PARTS MANUAL, L0088, REV. H THIS PAGE INTENTIONALLY LEFT BLANK 54