IGUANA circo wall-mounted. Distinctively elegant vertical radiators

Transcription

1 IGUANA circo wall-mounted istinctively elegant vertical radiators

2 Iguana Circo all-mounted imensions Product code: CIR ø C E air vent G 1/8 ø C T H E C E air vent G 1/8 H 95 min. 100 mm ith guard 230 mm ø35 Option: guard 130 Connections M M 4 5 ø Standard connection MM Top end connection 45 or 54 (1 number > flow) hen ordering a top end connection, no insert pipe should be ordered. Air vents should be positioned on the central heating pipes. Order code: Specify code 45 or 54 instead of MM - There is no extra charge. To guarantee the output of the Iguana models and to limit the pressure drop, Jaga recommends the use of tube diameters 16/2, 18/1 or 18/2. min. 100 mm ith guard 230 mm 95 Position flow and return pipe E ø35 ith connection sets Note: flow and return can be reordered ø Option: guard 130 Position of Flow and return pipe E ith connection sets All dimensions in mm Table Large Small Towel Hat ra

3 Outputs Outputs in watts at 75/65/20 C & 55/45/20 C, in accordance with EN442 code height length colour connection Order code: CIR /MM (Example order code shown is for a 10mm high radiator, 270mm long H L Supplied as Standard /65/20 55/45/20 75/65/20 55/45/ Colours: 001 Sandblast grey metallic, 301 white or 333 traffic white Central connection MM underneath /65/20 55/45/20 75/65/20 55/45/ H all fixing 2 chrome-plated air vents G 1/ /65/20 55/45/ Pressure drop eight & water content mk mce ms mc bar kpa eight in kg H Pressure drop ater flow in kg/h eight content in litre H

4 H Standard delivery : Table in beech nection, veneer no insert pipe should - Circo all mounted model with be ordered. Air vents should be central connection MM underneath Table COE 95 positioned on the Type central heating - wall fixing - 2 chrome-plated air M Mvents G 1/8 Table in beech pipes. Standard delivery : veneer Circo ø Circo all mounted model with Option: guard Standard Options colours: central connection MM underneath min. 100 mm Circo ø sandblast grey metallic 001 ith guard 230 mm COE Circo Type - wall fixing ø 340 white 301(RAL 9010 satin) ø chrome-plated Table air vents in G 1/8 white 333(RAL 9016 satin) beech veneer Large shelf in beech veneer Large shelf in beech veneer 95 Circo ø 270 Table Large shelf Standard colours: ø Circo ø sandblast grey metallic M M COE Type Option: Circo ø guard white 301(RAL 9010 satin) min. 100 mm - white 333(RAL 9016 satin) Circo ø Position ith guard flow 230 and mm Large shelf in beech veneer return pipe ø Circo ø COE Circo Type ø 340 Large shelf Table ø Small shelf iameter 278mmE Small 313mm shelf in beech 348mm code height veneer Circo E ø 270 iameter 278mm mm mm length Order 278 colour code: 313 conn. 348 Order code: Order code: Circo ø 310 Order 278 code: 313 Order 348 code: Order 100 code: COE:CIR XXX /MM COE Circo Type ø Position 730 flow 0 and return pipe Circo ø code height length colour conn. Small shelf in beech veneer COE:CIR. 10 Table Circo ø 310 Large 270 shelf XXX /MM Small shelf E COE Circo E Type ø 340 Towel rail ith connection sets Towel rail chrome-plated Circo ith aluminium ø 270 connection sets Note: flow and return can be reordered Circo ø COE Type Circo ø Small shelf in beech veneer Towel rail chrome-plated aluminium Large Circo ø 270 Small shelf Towel rail chrome-plated aluminium Towel rail shelf Circo ø 310 Hat rack ith connection sets COE Circo ith Type ø 340 connection sets Note: flow and return can be reordered Hat rack chrome-plated aluminium Circo ø Circo ø COE Type " Circo ø Small Hat rack iameter Towel shelf rail 278mm Hat 313mm rack chrome-plated 348mm Circo aluminium ø 270 iameter 278mm 313mm 348mm sets Order code: Order code: 100Order code: Circo ø 310 Order code: Order code: Order code: COE Circo Type ø Connection set with guard Circo ø (colour 270 to match radiator) Circo ø Towel TO PIPE Hat rack rail COE colour Circo ø fill in sleeve coupling sets Connection COIG.28L set with guard (colour to match radiator) COIG.28L.C Guard C TO PIPE COIG.31L COE colour fill in sleeve coupling Hat rack chrome-plated 3 COIG.31L.C.3... aluminium COIG.28L Hat rack COIG.34L COIG.28L.C COIG.34L.C Guard C Thermostatic 278 head COIG.31L Remark: COIG.31L.C.3... For flow right (set 44), R instead of L. match radiator) Ex. COIG.34L COIG.28R C TO 221 PIPE COIG.34L.C Remark: For flow right (set 44), R instead of L. match radiator) iameter 278mm Ex. 313mm COIG.28R mm... Flow left Flow right Guard C TO Order PIPE code: Order code: Order code: Thermostatic head Price incl. thermostatic valve, lockshield and sleeve couplings of L. 427 For 427 connection to the 493 wall: order 2 curves. Flow left Flow right Guard C 221 ATTENTION: 221 floorboards 3need to be removed for the guard Price incl. thermostatic valve, lockshield and sleeve couplings. of L. Flow right For connection to the wall: order 2 curves. 43 d and sleeve couplings. of L. es. Flow left oved for the guard. d and sleeve couplings. 43 es. Flow left oved for the guard. d and sleeve couplings. es. 44 Flow right 44 Flow right ATTENTION: floorboards need to be removed for the guard. oved for the guard. All dimensions in mm

5 Connection Sets The order code of the connection set will be completed with the sleeve coupling code Set 31 For connection to the wall COE.M2.M.1... white COE.M2.MC.1... chrome COE.M2.MB.1... black Set 32 eco angled lockshield eco angled manual valve For connection to the floor eco straight lockshield COE.MF2.M.1... white COE.MF2.MC.1... chrome COE.MF2.MB.1... black Set 33 For connection to the wall COE.J COE.J2.C.1... eco straight manual valve eco angled lockshield Thermostatic heads Chrome/ hite C eco angled thermostatic valve Thermostatic head Set 34 For connection to the floor eco straight lockshield eco straight thermostatic valve Chrome COE.JF COE.JF2.C.1... Set 35 COE.JH For connection to the wall COE.JH2.C.1... ouble angled lockshield ouble angled thermostatic valve

6 Connection Sets The order code of the connection set will be completed with the sleeve coupling code Set COE.P COE.P3.C.1... For connection to the wall eco-pro angled valve Thermostatic head Thermostatic valve Straight lockshield Cover plate Set Standard Kv COE.PF COE.PF3.C.1... For connection to the floor eco-pro straight valve Thermostatic head Set 43 For connection to the floor or to the wall / flow left COIG.28L COIG.28L.C COIG.31L Thermostatic valve Thermostatic Straight valve lockshield Straight lockshield Cover plate Cover plate Straight lockshield Thermostatic valve Cover plate For connection to the wall with set 43 and set 44: order 2 curves COIG.31L.C COIG.34L COIG.34L.C M 24 Set For connection to the floor or to the wall / flow right COIG.28R COIG.28R.C COIG.31R COIG.31R.C COIG.34R COIG.34R.C Straight lockshield Thermostatic valve Cover plate M 24 Curves 90 M24 x M24 Order code: M 24

7 Sleeve Couplings Included in the price of the connection sets Complete ordering code with sleeve couplings according to the material used and diameter of the tube. The correct type of sleeve coupling is determined by the ordering code of the connection set Example: COLO. P (insert relevant code from above) For Jaga valve - M24 For flexible steel or copper tube For synthetic tube Tube Tube / / / / / /1 For tube 15/1 only For tube 18/1 only / / / / / /2 For RPE/ALU tube Steel tube for CH Tube /2 Tube / / / /2 Pro Key Tool for easy mounting of the Jaga Pro valve

8 Correction factors Average correction factors according to EN442-75/65/20 C TV TL TR_ KEY Tv = flow temperature Tr = return temperature Tl = desired air temperature The indicated outputs with ΔT 50 c and ΔT 30 c are the exact outputs. ΔT 50 c outputs are measured in accordance with en442 and ΔT 30 c outputs are calculated according to en442. An average correction factor is given in this table for outputs at other ΔT and is applicable for all dimensions. How to choose the right radiator? Rapid estimation of heat losses Calculate the volume of the room (L x x H) and multiply this by the atts/m³ figure given in the table below. Choose according to the level of insulation and the desired room temperature. Insulation excellent good average poor required output in atts/m³ Example Use the table to determine the relevant correction factor with a water temperature of /60 c with a room temperature of 24 C. The correction factor = 0.90 required output 1000 watts : 1000 divided by 0.90 = 1111 watts therefore search in this leaflet s standard output table for a product with an output of at least 1111 watts. Alternatively use the radiator Finder search function on to identify all Jaga heating products with this required output. Output calculated in accordance with en442, at a water temperature of 75/65 C and a room temperature of 20 C (ΔT=50).

9 Product description Iguana Circo - wall-mounted Material Consists of vertical triangular steel radiation pipes, welded on steel positioning brackets. The radiation pipes are hydraulically connected using steel bends. Suitable for central heating. Finish The radiators are sandblasted, degreased, phosphated, electrostatically lacquered with epoxy-polyester powder and finally stove enamelled at 200 C. This high quality finish offers an optimal scratch resistance and is very easy to maintain. Thickness of the lacquer: min μ Pressure test: 9 bar orking pressure: 6 bar Colour The radiator is lacquered in the colour sandblast grey metallic 001 / white (RAL 9010) / white (RAL 9016) / other (see colour chart) How to install The building services engineer chooses the heating elements considering the following conditions: A heat output calculation according to the standard. Tables of heat outputs and dimensions for Iguana Circo wall mounted radiators according to EN 442. The radiators will be mounted to the wall with accessory brackets. The specially designed thermostatic connection sets / thermostatic Jaga eco / Jaga-Pro valves / manual Jaga eco valves can be connected to plastic central heating service pipes / RPE/ALU. tube / copper tube/ steel pipe. Jaga thermostatic heads / Jaga eco thermostatic heads chrome / Jaga eco thermostatic heads chrome/ white / Jaga Comap thermostatic heads silver / not to be / to be fitted. The Iguana Circo wall mounted model consists of triangular vertical radiation pipes welded on steel positioning brackets. The radiation pipes are hydraulically connected using steel bends, placed next to each other in half a circle. Supplied with wall brackets and 2 air vents G 1/8. Central connection, standard for 2 pipe. Options All options have the same radius as the radiator. They can also be ordered and fitted afterwards. Towel rail and fixings in chrome-plated aluminium. Hat rack and fixings in chrome-plated aluminium- Including 5 coat hooks. Small shelf in beech veneer with chrome-plated fixings. Shelf width: 100mm. Large shelf in beech veneer with chrome-plated fixings. Shelf width: 170mm. eco connection sets and valves 2 pipe. Table in beech veneer with supports and fixings in chromeplated aluminium. eco Pro connection sets and valves 2 pipe. Guard with thermostatic valve, return valve for invisible connection to the wall or to the floor. Floorboards need to be removed for the guard.

10 Jaga colours For Iguana Circo - wall-mounted RAL hite Bahama Capri RAL Off-white RAL English Green Natural Special Colours RAL Light Grey hisper Rose Edelweis 001 Sandblast Grey Metallic RAL Black RAL Turquoise 2 3 Jasmine 002 Hammerstroke Silver/Black Pergamon Manhattan RAL Bermuda Chocolate Brown RAL Ruby Red Classic hite 003 Claret Metallic RAL 5003 RAL Sapphire Blue ark Grey RAL 5015 RAL Azure Violet RAL Patina Green Aloa Blue RAL Smooth Grey Metallic 006 Aluminium RAL Golden Yellow Aegean RAL Anthracite Grey 007 Anthracite Metallic RAL Flaming Red Calypso Sunrise 008 Anthracite Structure RAL Traffic hite As it s impossible to reproduce colours with 100% accurancy, this colour chart is intended as a guide only. Colour swatches are available on request.

11 Jaga Guarantee Information 1 The guarantee is valid only if the equipment is properly and correctly used, by its first owner and if installed in accordance with the norms and instructions as detailed in the instruction leaflet and current industry standard practices. 2 The guarantee only applies to the equipment and the spare parts supplied by Jaga. Jaga has the choice between repair and replacement of the equipment or the spare parts. If any modifications have been made by Jaga to the standard product design, Jaga reserves the right to replace the guaranteed equipment with equivalent products or spare parts. 3 The period of guarantee is mentioned in this certificate. The guarantee decreases every year on a straight line basis by an equal percentage in order to reach a zero guarantee at the end of the guarantee period (e.g. for a period of 10 years the annual decrease of the guarantees 10% of the invoiced value). Repaired or replaced product is guaranteed through to the end of the original guarantee period. 4 The guarantee is valid only on products displaying the appropriate identification information concerning product type and series. No guarantee is granted on equipment or spare parts lacking this information, on equipment where this information has been removed or altered, or on equipment that has been repaired or modified by persons not authorised by Jaga to carry out this work. 5 The customer is responsible for any damage caused as a result of errors in installation or use of incorrect fittings, or for any damage caused by electrical connections, faulty or damaged electrical installations or appliances, erroneous voltage or hydraulic pressure and all other errors not directly related to the product delivered by Jaga. The guarantee is also revoked when unsuitable parts or components are used. The guarantee for our heat exchangers is not valid if they are regularly drained, or if they are heated by means of industrial water, steam or water saturated by excessive quantities of oxygen. The quality of the system ater has to be in accordance with the VI directives. The guarantee is also not applicable if the heat exchangers are placed in unsuitable atmospheric surroundings, such as but not exclusively ammonia, caustic substances etc. 6 This guarantee excludes damage due to incorrect handling and/or use of the equipment, or due to formation of lime deposits, incorrect use of the safety valve, or to all equipment that is incorporated into the building in a way that means it cannot be accessed normally. 7 Any work undertaken or product supplied as a result of a guarantee claim that proves not to be valid will be charged for. Product supplied will be invoiced at the customer s standard purchasing terms, and labour will be charged at 50 per hour with a minimum labour charge of The guarantee period starts from the date of the invoice for supply of the products covered by the guarantee. If the invoice is not available, the date of production will be used based on the product I number/series. 9 Only the courts of judicial district Hasselt (Belgium) are authorised to deal with disputes arising from this guarantee. It will apply Belgian law even when sales involved are subjects of EU member states as well as non-eu member countries. Casings and components Valves for Low-H2O heat exhangers