LU-2200N Series. Capabilities for sewing car seats have been significantly improved. high speed. powerful. high performance

Size: px

Start display at page:

Download "LU-2200N Series. Capabilities for sewing car seats have been significantly improved. high speed. powerful. high performance"

Spencer Matthews
6 years ago
Views:

1 LU-2200N eries High-speed, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook and utomatic Thread Trimmer high speed powerful high performance LU-2200N eries apabilities for sewing car seats have been significantly improved.

2 Efficiency of feed and sewing capabilities for supporting sewing performance at a higher speed of 3,500sti/min LU-2210N-7 LU-2210N- 7 LU-2210W-7 ouble-capacity hook The machine demonstrates outstanding performance when sewing heavy materials, with its "high-quality consistent sewing capabilities", as well as with its remarkably powerful feed. LU-2260N-7 LU-2260N- 7 LU-2260W-7 ouble-capacity hook The machine is the standard type 2-needle machine, which is essential for topstitching processes. s with the aforementioned 1-needle machine, the standard 2-needle machine has an outstanding highspeed capability and promises consistent sewing performance.

3 3 LU-2200N eries 500sti/min Higher lift of the presser foot The machine is provided as standard with a pneumatic auto-lifter. The high, 16mm presser foot lift enables easy material handling. The walking foot and presser foot's alternating vertical movement can be set and changed with ease. The vertical strokes of the presser foot and walking foot (alternating vertical movement) can be easily changed using a large dial mounted on the top surface of the machine head. In addition the sewing speed is automatically adjusted with the set value. With this feature, ideal sewing conditions are maintained at all times. 16mm The machine promises outstanding adaptability and ease of use with its full-fledged functions. The highly efficient vertical-axis 1.6 fold-capacity hook is provided as standard. With the adoption of this vertical-axis 1.6 foldcapacity hook, the frequency of bobbin thread winding is reduced, promising sewing work of increased efficiency. Instantaneous change-over device for the alternate vertical movement amount (L device) is provided as standard. The alternate vertical movement amount can be instantaneously maximized in a process for sewing a hard-to-feed part of material, such as a multilayered part, finishing with beautiful seams free from stitch gathering. The machine is provided with both a hand switch and knee switch. obbin for vertical-axis obbin for standard hook Push-button type Knee switch type

4 High-speed, 1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook and utomatic Thread Trimmer LU-2212N-7 / 2-pitch dial type One of two different stitch lengths can be selected according to the application. The stitch length can be instantaneously changed over by pressing the stitch selector switch mounted on the lower part of the machine arm. 2P switch 2P stitch dial ON Operating switch OFF titch sample stitch: 8mm / 2P stitch: 4mm stitch dial High-speed, 1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook and utomatic Thread Trimmer LU-2220N-7 Thread nipping work required at the beginning and end of sewing is reduced. This is a high-performance machine which contributes to both increased productivity and improved quality for sewing car seats. Frequency of the use of scissors by the operator is reduced, thereby helping prevent the material from being damaged. / 2-pitch dial / horter thread remaining type [omparison of the remaining thread length] Upper side: LU-2210N-7 / Lower side: LU-2220N-7 Right side of the material at the beginning of sewing Wrong side of the material at the end of sewing The needle thread does not remain on the right side of the material. Remaining-thread length: 5mm Operating switch Needle thread clamping at the beginning of sewing can be turned ON/OFF. The thread trimming mechanism has been totally redesigned to shorten the length of thread remaining on the material at the end of sewing down to 5 mm.

5 LU-2200N eries TTHMENT escription Part No. uspended ruler (asm.) H152 MH uspended ruler mounting base (asm.) uspended ruler mounting base (asm.) is required to mount the suspended ruler. INTERHNGELE GUGE PRT LU-2210N-7 LU-2210W-7 LU-2212N-7 LU-2220N-7 pplication Walking foot Presser foot K (pressing face is reduced) For material with overlapped section llows the smooth feed of multi-layered portions of the material For material with overlapped section For light-weight sponge For urethane Used for resilient materials including sponge For heavy-weight sponge Used for more resilient materials Thick For urethane presser Used for sewing material edges 1mm presser E Used for sewing material edges 1mm For piping Used for the general piping process φ E H For piping φ φ φ φ F J For piping For piping The position of the needle can be adjusted according to the pipe to be sewn djustable φ J M djustable presser for piping φ φ φ φ φ φ φ φ Wide type To be used when a sewing product cannot be smoothly fed (special order) (special order) Without groove To be used when the thread can not be grasped at the sewing start or K or

6 INTERHNGELE GUGE PRT Throat plate For LU-2210N-7 / 2212N-7 For LU-2220N Wide type (special order) Throat plate ( ) for the LU-2220N-7 is also applicable to the LU-2210N-7/LU2212N-7. Feed dog For LU-2210N-7 / 2212N-7 2.5mm 1.6mm Without groove (To be used if the needle (thread groove width: thread and bobbin thread do not intertwine with each other 1.0mm) at the beginning of sewing) For thin thread (thread groove width: 1.0mm) For LU-2220N-7 Wide type (special order) 1.6mm 3.0mm 3.0mm 2.5mm 1.0mm mm 1.0mm 2.0mm (thread groove width: 1.0mm) For thin thread (thread groove width: 1.0mm) For thick thread (thread groove width: 1.9mm) For needling curved prevention (Nm130) For needling curved prevention (Nm140) LU-2260N-7 LU-2260W-7 Needle gauge Gauge set No. Needle clamp Presser foot Walking foot Throat plate Feed dog Left lide plate Right 6mm 8mm mm (standard) 12mm mm Note) pplicable to gauges "4 mm to 36 mm" (LU-2260N-7) and "4 mm to 30 mm" (LU-2260W-7). ny gauges other than the forementioned are available through special order. The right and left slide plates are not included in the parts represented by the gauge set number.

7 LU-2200N eries WHEN YOU PLE ORER Machine head 1-needle 1-needle / 2-pitch dial type 1-needle / 2-pitch dial / horter thread remaining type Feed dog With groove (standard) Without groove (excluding LU-2220) For thin thread For thick thread (LU-2220 only) Option Not provided Z With bobbin thread remaining amount detecting device E-16 is applicable to LU-2210 and LU-2212 (only with a 1.6 fold-capacity hook). E-17 is applicable to LU L device Not provided Provided with L function / Push-button type Provided with L function / Knee switch type Z Z and are only applicable to LU LU22 70 Hook Walking foot Presser foot N ouble-capacity hook W For urethane For material with overlapped sections For the LU-2212 and LU-2220, only 1.6-fold hooks are applicable. For urethane For piping (ø3) E E For piping (ø4) F For piping (ø3) F For piping (ø5) G For piping (ø4) G For piping (ø6) H For piping (ø5) H djustable type for piping (ø3) J For piping (ø6) J djustable type for piping (ø4) K Pressing face is reduce K djustable type for piping (ø5) L djustable type for piping (ø6) M LU Hook Option N Needle gauge L device Not provided Z ouble-capacity hook W 6mm 8mm 10mm (standard) 12mm 20mm E J Not provided Provided with L function / Push-button type Provided with L function / Knee switch type Z With bobbin thread remaining amount detecting device (E-16) Only applicable to the machine with a ontrol box 922 Power supply ingle-phase V 3-phase V Operation panel P18 P180 ingle-phase V (for general export) K ingle-phase V (for ce) N ingle-phase V (for china) U

8 PEIFITION Model name Max. sewing speed Max. stitch length Needle bar stroke Max. lift of the presser foot lternating vertical movement Thread take-up Hook Needle Thread istance from needle to machine arm Lubrication obbin thread winder afety mechanism utomatic reverse feed function uto-lifter ompressed air ir consumption Weight of the machine head Power requirement Power consumption sti/min stands for tiches per Minute LU-2210N-7 LU-2260N-7 LU-2212N-7 LU-2220N-7 LU-2210W-7 LU-2260W-7 1-needle / 2-pitch dial / 1-needle 1-needle / 2-pitch dial type 2-needle horter thread remaining type 3,500sti/min 9mm (forward/backward) 6mm (forward/backward) 33.8mm uto: 16mm, y hand: 9mm 1mm 6.5mm (by dial) Link type N: Vertical-axis N: Vertical-axis N: Vertical-axis W: Vertical-axis double-capacity hook W: Vertical-axis double-capacity hook R (Nm140) Nm110 Nm160 #30 #4, , Nm60/3 20/ mm utomatic uilt on the machine head Provided as standard Provided as standard #20 #5, , Nm40/3 20/3 Provided as standard (pneumatic auto-lifter) 0.5MPa 0.763dK/min (NR) 1.078dK/min (NR) 1.337dK/min (NR) 0.736dK/min (NR) 55kg 58kg ingle-phase V, V 3-phase V 425V JUKI EO PROUT The LU-2200N eries is an eco-friendly product which complies with JUKI EO PROUT standards for protecting the environment The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of hazardous substances, which is stricter than other restrictions, such as those of the RoH irective. For details of JUKI EO PROUT, refer to: The RoH irective is an EU irective limiting the use of 6 hazardous substances (lead, hexavalent chromium, mercury, cadmium, P and PE) in electrical and electronic equipment. The Juki Green Procurement Guideline is the voluntarily established criteria to eliminate not only the aforementioned six substances, but also other ones which also adversely affect the environment. Registered Organization Head Office The cope of the Registration The activities of research, development, design, sales, distribution, and maintenance services of industrial sewing machines, household sewing machines and industrial robots, etc., including sales and maintenance services of data entry systems. M001 EWING MHINERY UINE UNIT , TURUMKI, TM-HI, TOKYO , JPN PHONE : (81) FX : (81) pecifications and appearance are subject to change without prior notice for improvement. Read the instruction manual before putting the machine into service to ensure safety. This catalogue prints with environment-friendly soy ink on recycle paper. JULY, 2015 Printed in Japan()

LU-2200N Series. Capabilities for sewing car seats have been significantly improved. high speed. powerful. high performance

LU-2200N Series. Capabilities for sewing car seats have been significantly improved. high speed. powerful. high performance LU-2200N eries High-speed, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook and utomatic Thread Trimmer high speed powerful high performance LU-2200N eries apabilities for sewing car seats