EdcoParts.com An ibuy Stores Company

Size: px

Start display at page:

Download "EdcoParts.com An ibuy Stores Company"

Marilynn Short
6 years ago
Views:

E-4ECGC-PL-008 REVISED STARTING SERIAL #080000 PARTS LIST MANUAL Models 4-EC & 4-GC FOUR-DISC CONCRETE FLOOR GRINDERS SKU # 5500 54400 53600 52800-230 52800-460 52800-50/220 52800-50/380 52800-50/440

1 E-4ECGC-PL-008 REVISED STARTING SERIAL # PARTS LIST MANUAL Models 4-EC & 4-GC FOUR-DISC CONCRETE FLOOR GRINDERS SKU # / / /440 MODEL # 4GC-H 4GC-P 4EC-5B/230/ 4EC-5B/230/3 4EC-5B/460/3 4EC-5B/50/220/3 4EC-5B/50/380/3 4EC-5B/50/440/3 POWER OPTION HONDA GXV340 GASOLINE ENGINE W/ DUAL ELEMENT AIR CLEANER HONDA GXV340 PROPANE ENGINE W/ DUAL ELEMENT AIR CLEANER BALDOR ELECTRIC MOTOR 5HP 60Hz 230V -PHASE 9.5 F.L. AMPS BALDOR ELECTRIC MOTOR 5HP 60Hz 230V 3-PHASE 2 F.L. AMPS BALDOR ELECTRIC MOTOR 5HP 60Hz 460V 3-PHASE 6 F.L. AMPS BALDOR ELECTRIC MOTOR 5HP 50Hz 220V 3-PHASE 3 F.L. AMPS BALDOR ELECTRIC MOTOR 5HP 50Hz 380V 3-PHASE 7.6 F.L. AMPS BALDOR ELECTRIC MOTOR 5HP 50Hz 440V 3-PHASE 6.5 F.L. AMPS 00 Thomas Johnson Drive, Frederick, MD USA Phone (30) Fax (30) Website: sales@edcoinc.com Printed in USA 2008 Page

2 ILLUSTRATION : GEAR CASE ASSEMBLY GEAR CASE ASSEMBLED

3 PARTS LISTING - ILLUSTRATION : GEAR CASE ASSEMBLY ITEM # PART # DESCRIPTION QTY MAIN FRAME BEARING, BALL 4-HOLE FLANGE, ND WASHER, LOCK 7/ NUT 7/ FITTING, GREASE /4-28 X BEARING, BALL 3/4 4-HOLE FLANGE WASHER, LOCK 3/ NUT 3/ SCREW, CAP 3/8-24 X -/ SHAFT, LARGE GEAR DIA X 7-3/6 L GEAR, SPUR 2 TOOTH (DRIVEN) PIN, ROLL 3/8 X 2-/ PIN, ROLL 7/32 X 2-/ SHAFT, PINION GEAR 3/4DIA X 7-3/8 L GEAR, SPUR 25 TOOTH (PINION) PIN, ROLL /4 X -/ WASHER, FLAT 3/4 SAE COVER, GEAR CASE PLUG, HOLE 7/8 (CHROME) SCREW, CAP 5/6-8 X WASHER, LOCK 5/ WASHER, FLAT 5/6 SAE SCREW, CAP /2-3 X 3-/ WASHER, FLAT /2 SAE NUT, HEX NYLON LOCK /2-3 7

4 ILLUSTRATION 2 : MULTI-ACCESSORY DISC ASSEMBLY ITEM # PART # DESCRIPTION * QTY DISC ASSEMBLY COMPLETE, RIGHT-HAND (ITEMS THRU 8) DISC ASSEMBLY COMPLETE, LEFT-HAND (ITEMS THRU 8) MULTI-ACCESSORY DISC ONLY R.H. FOR 8888 ASSEMBLY L.H. FOR 9999 ASSEMBLY RING, HUB CARRIER, 6-HOLE 3 02 RING, NEOPRENE, 4-/2 OD X /2 THK HUB, ALUMINUM 6-HOLE (GRINDER) 5 04 SCREW, SKT. HD. CAP 3/8-24 X 2-/ SPACER, STEEL 9/6OD X 3/8ID X 7/ SPACER, STEEL 5/8OD X 3/8ID X 3/ NUT, LOCK 3/8-24 W/ NYLON PATCH 6 *QUANTITIES FOR ITEMS THRU 8 ARE PER EACH DISC ASSEMBLY 2 RIGHT-HAND & 2 LEFT HAND DISC REQUIRED PER 4-DISC GRINDER

5 E-4ECGC-PL-008 ILLUSTRATION 3 : MULTI-ACCESSORY DISC ARRANGEMENT ITEM# PART# DESCRIPTION QTY MULTI-ACCY. DISC ASSEMBLY, RH MULTI-ACCY. DISC ASSEMLBY, LH PIN, ROLL 3/8 X 2 4

6 ILLUSTRATION 4 : OPTIONAL SURFACER DISC ASSEMBLY ITEM # PART # DESCRIPTION *QTY C DISC ASSEMBLY COMPLETE, R.H. W/ STEEL CUTTERS. W/ CARBIDE CUTTERS C DISC ASSEMBLY COMPLETE, L.H. W/ STEEL CUTTERS W/ CARBIDE CUTTERS DISC ONLY, SURFACER RIGHT HAND DISC LEFT HAND DISC 2 02 RING, NEOPRENE 4-/2 OD X /2 THK RING, HUB CARRIER, 6-HOLE T HUB, CAST IRON, 6-HOLE 5 04 SCREW, SKT. HD. CAP 3/8-24 X 2-/ SPACER, STL. 9/6OD X 3/8ID X 7/ SPACER, STL. 5/8OD X 3/8ID X 3/ NUT, LOCK 3/8-24 W/ NYLON PATCH NUT 5/ ITEM # PART # DESCRIPTION *QTY WASHER, LOCK 5/ SCREW, CAP 5/6-24 X 3/ HOLDER, CUTTER SHAFT BOLT, CARRIAGE 3/8-6 X CLIP, SPEED NUT 3/ WASHER, FLAT 3/8 SAE WASHER, LOCK 3/ NUT 3/ RETAINER, CUTTER SHAFT CG226 CUTTER SHAFT /2 X 3-/ CG227 SPACER /2 ID 33 2 CUTTERWHEEL JRS50P 2 POINTED STEEL CP206T -3/4 6-POINT CARBIDE 24 8 *QUANTITIES FOR ITEMS 2 THRU 2 ARE PER EACH DISC ASSEMBLY 2 RIGHT-HAND & 2 LEFT HAND DISC REQD. PER 4-DISC GRINDER

7 E-4ECGC-PL-008 ILLUSTRATION 5 : OPTIONAL SURFACER DISC ARRANGEMENT ITEM# PART# DESCRIPTION QTY. *2222 SURFACER DISC ASSEMBLY, RH 2 2 *3333 SURFACER DISC ASSEMBLY, LH PIN, ROLL 3/8 X 2 4 * THESE PART NUMBERS ARE FOR THE ASSEMBLIES WITH STEEL CUTTERS. USE PART NUMBER 2222C AND 3333C FOR THE DISC WITH CARBIDE CUTTERS. 00 Thomas Johnson Drive, Frederick, MD USA Phone (30) Fax (30) Website: sales@edcoinc.com Printed in USA 2008 Page 9

8 ILLUSTRATION 6: HANDLE AND FORK GROUPING

9 PARTS LISTING - ILLUSTRATION 6 : HANDLE AND FORK GROUPING ITEM # PART # DESCRIPTION QTY HANDLE BAR GRIP, HAND MODEL AT SCREW, CAP 3/8-24 X -3/ WASHER, FLAT 3/8 SAE NUT, LOCK 3/ BEARING, BALL 5/8 2-HOLE (NO G.F.) BOLT, CARRIAGE /4-20 X WASHER, FLAT 5/6 SAE WASHER, FLAT /4 SAE NUT, KEPS / HANDWHEEL, LARGE W/ 5/8-8 X 6 ROD KNOB, BALL -3/8 W/ /2-3THD, BLK SLEEVE FOR /2 CAPSCREW, TAPERED SCREW, SKT. HD. CAP /2-3 X 4-/ SPACER, HANDWHEEL 5/8 ID X 3/8 L SPACER, HANDWHEEL 5/8 ID X 3/4 L COLLAR, LOCKING 5/ LINKAGE, CUT CONTROL LOWER FITTING, GREASE /4-28 STRAIGHT SCREW, CAP /2-20 X WASHER, FLAT /2 SAE NUT, LOCK / SHAFT, FORK PIVOT 5/8 X 3-3/ COLLAR, LOCKING 5/ FORK WASHER, FLAT 3/4 SAE WHEEL 8 X 2-/2 X 3/4 BRG WASHER.755 ID X.25 OD X.060 THK PIN, COTTER 3/6 X -/2 2

10 ILLUSTRATION 7: SKIRT GROUPING ITEM # PART # DESCRIPTION QTY RUBBER SKIRT 8-/2 x 90-/ BAND 76, FRONT CLAMP, MODIFIED SAE# BRACKET, SKIRT RIGHT BAND BRACKET, SKIRT LEFT BAND SCREW, CAP 5/6-8 X WASHER, LOCK 5/ WASHER, FLAT 5/6 SAE PANEL, CENTER SKIRT SCREW, CAP 5/6-8 X 3/ WASHER, FLAT 5/6 SAE WASHER, LOCK 5/ NUT 5/6-8 4

11 ILLUSTRATION 8 : VACUUM PORT & HOSE GROUPING E-4ECGC-PL-008 ITEM # PART # DESCRIPTION QTY MOUNT BRKT., Y-FITTING FITTING, 3 Y 3 23 RIVET, BLIND 3/6 X.440 L X.375HD WASHER, LOCK /4 SAE SCREW, CAP STSHW /4-20 X / CLAMP, HOSE, SAE #52, ADJ. TO 3-3/ HOSE, FLEX 3 ID X 24 L HOSE, FLEX 3 ID X 36 L

12 ILLUSTRATION 9: ENGINE & BELT DRIVE GROUPING

13 PARTS LISTING - ILLUSTRATION 9 : ENGINE & BELT DRIVE GROUPING ITEM # PART # DESCRIPTION QTY ENGINE, HONDA GXV340UT2-DX3 WITH STANDARD DUAL ELEMENT AIR CLEANER MANUAL CHOKE KIT FOR HONDA GXV340 2-A 585 SCREW, MACHINE M6 X 6MM PHILLIP HD 2-B 588 WASHER.265 ID,.50 OD, THK 2-C 587 WASHER, FIBER.75 X.25 X D 583 LEVER, CHOKE CONTROL, GXV340 2-E 586 WASHER, BELLEVILE.500 X.255 X.08 2-F NUT, HEX NYLON LOCK M6 X MM 2-G 584 CAP, FLAT RED.062 X.75 X 2-H 930 DECAL, CHOKE 5/8 X 5/ METER, HOUR, REDINGTON INDUCTIVE (OPTIONAL) ADAPTER, 20MM X.5 TO /4FPT BARB, PUSH-ON 3/8HOSE X /4MPT HOSE, PUSH-ON 3/8 ID X 5-/2 L BARB, PUSH-ON 3/8 HOSE X /4FPT PIPE PLUG /4 NPT (BRASS) A MOUNT, ENGINE SCREW, CAP 5/6-8 X -/ WASHER, FLAT 5/6 SAE WASHER, LOCK 5/ NUT 5/ SCREW, CAP 5/6-24 X 3/ SCREW, CAP 3/8-24 X WASHER, FLAT 3/8 SAE WASHER, LOCK 3/ NUT 3/ CLUTCH, CENTRIFUGAL 3.5 X 2GR X KEY /4 SQ. (INCLUDED W/ ENGINE) BELT BX-32 COG SHEAVE 6.9 OD X 2GR.B X SDS BUSHING, SHEAVE SDS X 3/4 BORE KEY 3/6SQ X -/ CABLE, THROTTLE, LEVER-TYPE SCREW, MACHINE 0-32 X / NUT, KEPS TIE, CABLE, BLACK NYLON -/ A SWITCH W/ WIRES, ROCKER RED ON-OFF

14 E-4ECGC-PL-008 ILLUSTRATION 0: OPTIONAL PROPANE GROUPING

15 PARTS LISTING - ILLUSTRATION 0: OPTIONAL PROPANE GROUPING ITEM # PART # DESCRIPTION QTY. 502 ENGINE, HONDA GXV340T2-DP23 PROPANE STARTER KIT, ELECTRIC 20 VOLT AC SCREW, CAP /4-20 X WASHER, FLAT /4 SAE NUT, KEPS / SCREW, CAP M6 X.0P X 8MM WASHER, LOCK / WASHER, FLAT /4 SAE NUT M6 X.0MM PITCH VAPOR KIT FOR HONDA GXV340T2-DP23 KIT INCLUDES: DRY-GAS REGULATOR, VACUUM FUELOCK-FILTER, FITTINGS, HOSES, CLAMPS, AND PLASTIC TIE WRAPS 7502 BRKT., PROP. REG./FUEL-LOCK FILTER SCREW, CAP 5/6-8 X WASHER, FLAT 5/6 SAE WASHER, LOCK 5/ NUT 5/ PROPANE TANK 20LB. HORZ DECAL, ARROW, RED, 3 X PROPANE TANK MOUNT COMPLETE (INCLUDES ITEMS 9-24) PROPANE TANK STRAP W/ HINGE SCREW, FLAT HD SLT /4-20 X PROPANE TANK CRADLE BRACKET ONLY PROPANE TANK CLAW BRACKET NUT, KEPS / PROPANE TANK TOGGLE CLAMP BOLT, CARRIAGE 3/8-6 X FULL THD WASHER, FLAT 3/8 SAE (NOT SHOWN) WASHER, LOCK 3/8 (NOT SHOWN) NUT 3/8-6 (NOT SHOWN) 4

16 E-4ECGC-PL-008 ILLUSTRATION : MOTOR & BELT DRIVE GROUPING

17 PARTS LISTING - ILLUSTRATION : MOTOR & BELT DRIVE GROUPING ITEM # PART # DESCRIPTION QTY MOTOR, BALDOR 5HP-PH 60HZ 230V 3450RPM (REPLACEMENT CAPACITORS BELOW) REPLACEMENT RUN CAPACITOR 40MFD 370V ( REQ D.) REPLACEMENT START CAPACITOR 6-93MFD 250V (2 REQ D.) 5HP-3PH 60HZ 230/460V 3450RPM 5HP-3PH 50HZ 220/380/440V 2850RPM MOUNT, MOTOR SCREW, CAP 3/8-24 X WASHER, FLAT 3/8 SAE WASHER, LOCK 3/ NUT 3/ SCREW, CAP 3/8-24 X WASHER, FLAT 3/8 SAE WASHER, LOCK 3/ NUT 3/ SHEAVE 3 OD X 2GR.B X -/8 BORE KEY /4 SQ (INCLUDED W/ MOTOR) BELT 5L SHEAVE 6.9 OD X 2GR.B X SDS BUSHING, SHEAVE SDS X 3/4 BORE KEY 3/6SQ X -/ CONDUIT LOCK NUT 3/4 NP STRAIN RELIEF 3/4 NPT X WASHER, FLAT -/2 X -/6 X WIRE HARNESS WIRE HARNESS 0/3 X 42 LOA (-PHASE UNITS) WIRE HARNESS 2/4 X 42 LOA (3-PHASE UNITS) STARTER -M-BRF-P (-PHASE, 60HZ, 230V UNITS) -M-BRF-P (3-PHASE, 60HZ, 230V UNITS) -M-BRF-P (3-PHASE, 50/60HZ, 440/460V UNITS) -M-BRF-P (3-PHASE, 50HZ, 220V UNITS) -M-BRF-P (3-PHASE, 50HZ, 380V UNITS) SCREW, MACHINE 8-32 X 3/ NUT, KEPS MOUNTING BRKT., LOVATO M STARTER SCREW, CAP STSHW /4-20 X / WASHER, LOCK / WIRE HARNESS WIRE HARNESS 0/3 X 24 LOA (-PHASE UNITS) WIRE HARNESS 2/4 X 24 LOA (3-PHASE UNITS) * PLUG, LOCKING 20A/250V L6-20P * CONNECTOR, LOCKING 20A/250V L6-20R PLUG, RECT. HOLE, PLASTIC SNAP-IN * PLUG & CONNECTOR (ITEMS 28 & 29) ARE NOT INCLUDED WITH 3-PHASE UNITS

18 ILLUSTRATION 2 : HOOD, OPTIONAL WEIGHT TRAY & WEIGHT BLOCKS ITEM # PART # DESCRIPTION QTY HOOD BOLT, CARRIAGE 3/8-6 X FULL THD NUT, PUSH 3/8 (RETAINING CLIP) WASHER, FLAT 3/8 SAE WASHER, LOCK 3/ NUT, WING 3/ WT-2 WEIGHT HOLDING TRAY (OPTIONAL) WEIGHT BLOCK, 40 LB. (OPTIONAL) 6

19 ILLUSTRATION 3 : DYMA-SERT ACCESSORY ITEM # PART # DESCRIPTION *QTY. 920 CG22D DYMA-SERT HOLDING CASE W/PAD (ITEMS 2 AND 3) DYMA-SERT HOLDING CASE (INCLUDES CLIP & RIVET) RUBBER SHOCK PAD, DYMA-SERT DYMA-SERT ASSEMBLY (SOLD SEPARATLY) EG-X, GRIT (GENERAL PURPOSE) EG-2X, GRIT (ABRASIVE CONCRETE) EG-3X, GRIT (EPOXY MORTARS) EG-5X, 50 GRIT (TERRAZZO) EG-7X, 80 GRIT (TERRAZZO) EG-9X, 20 GRIT (TERRAZZO) WEDGE CG225, HARDWOOD 2 * QUANTITIES FOR ITEMS, 4, AND 5 ARE PER 4-DISC GRINDER QUANTIES FOR ITEMS 2 & 3 ARE PER EACH DYMA-SERT ACCESSORY

20 ILLUSTRATION 4 : STRIP-SERT ACCESSORY PAGE LEFT BLANK INTENTIONALLY ITEM # PART # DESCRIPTION *QTY. STRIP-SERT ASSEMBLY ASSEMBLY WITH PRO TUNGSERT (ITEMS 2 THRU 9) ASSEMBLY WITHOUT PRO TUNGSERT, ITEM SCREW, SKT.HD.CAP /2-3 X 3.5,GR TUNGSERT HOLDER BOX, STRIP-SERT SCREW, SKT. HD. CAP /4-20 X 3/ WASHER, HI-COLLAR LOCK.26ID X or PRO TUNGSERT, 4 SIDED CARBIDE PRO TUNGSERT PACKAGE (SIX OF ITEMS 4, 5, 6 & ONE OF ITEM ) TUNGSERT BLOCK, STRIP-SERT SPRING, COMP..765 OD X.25 FL NUT, HEX NYLON LOCK / WEDGE CG225, HARDWOOD 243 WRENCH, HEX L-KEY 3/6, SHORT-ARM * QUANTITIES FOR ITEM, IS PER 4-DISC GRINDER QUANTIES FOR ITEMS 2 THRU 9 ARE PER EACH STRIP-SERT ACCESSORY

21 ILLUSTRATION 5 : SCARIFIER ACCESSORY ITEM # PART # DESCRIPTION *QTY. THROW-A-WAY SCRAIFIER CG222 TAW SCARIFIER, STANDARD CG223 TAW SCARIFIER, HEAVY DUTY 2 24 CG22 SCARIFIER HOLDING CASE 2 * QUANTITIES ARE PER 4-DISC GRINDER ILLUSTRATION 6 : OTHER ACCESSORIES GRINDING STONES, WIRE BRUSHES, SILABIDE PADS, START-UP PACKS AND OTHER ACCESSORIES ARE AVAILABLE. REFER TO PRICE LIST CATALOG OR CALL YOUR LOCAL EDCO REPRESENTATIVE FOR MORE INFORMATION. SEE ILLUSTRATION 8 FOR OPTIONAL PAD DRIVER FOR THE SILABIDE PADS.

22 ILLUSTRATION 7 : OPTIONAL PAD DRIVER DISC ASSEMBLY ITEM # PART # DESCRIPTION *QTY PAD DRIVER DISC ASSEMBLY (INCLUDES ITEMS 2 THRU 5) HUB STUD, PAD DRIVER (GRINDER) DISC ONLY, PAD DRIVER WASHER, FLAT /2 SAE SCREW, CAP /2-20 X SILABIDE PAD, MEDIUM (NOT INCLUDED W/ ASSEMBLY) 4 *QUANTITIES FOR ITEMS 2 THRU 5 ARE PER EACH DISC ASSEMBLY QUANTITIES FOR ITEMS AND 6 ARE PER 4-DISC GRINDER

PARTS LIST MANUAL MODEL 2-EC and 2-GC

PARTS LIST MANUAL MODEL 2-EC and 2-GC E-ECGC-PL-010 REVISED STARTING SERIAL # 33 PARTS LIST MANUAL MODEL -EC and -GC Two-Disc Concrete Floor Grinder Page 1 E-ECGC-PL-010 READ AND UNDERSTAND THE OPERATORS INSTRUCTION MANUAL THOROUGHLY BEFORE