Product Data CF5A COILS KMABA BLOWERS. For Manufactured Homes THE CF5A INDOOR COIL

Transcription

1 Product Data CF5A COILS KMABA BLOWERS For Manufactured Homes THE CF5A INDOOR COIL To complete your cooling or heating system, the model CF5A Coil is installed inside your Evcon/Coleman, Nordyne/Miller/Intertherm, or AirPro gas or electric furnace. The coil is uncased and designed for installation within the manufactured home furnace casing or inside a factory-installed plenum. This indoor coil is often used in conjunction with blower kits and other accessories. The CF5A coil is designed for quick and easy installation by a qualified service technician. The CF5A has an AccuRater piston for refrigerant flow control. The coil can be used in cooling only applications or as part of a heat pump system. The CF5A may be used as is with R-22 or Puron systems. When heating in conjunction with a heat pump, the outdoor heat pump unit recovers heat from the outdoor air, and transmits it to the CF5A indoor coil for distribution to the living space. The CF5A coil is not activated when heating in conjunction with a furnace without a heat pump in the system. Built-in drainage assembly ensures leak-free condensate removal. Periodic cleaning of filter and drainage sections is recommended to avoid possible sediment blockage. The A-shape design of the coil provides maximum cooling-heating transfer surface and ease of handling at installation. Three coil sizes are available, as noted in the CF5A coil table, covering a range of cooling-heating capacities to meet varying manufactured home requirements. CM5A CF5A KMACC CM5B KMABA Copyright 2001 Carrier Corporation Form CF5A-4PD

2 THE KMABA BLOWER KMABA blower kits and accessories are designed and built to meet the needs of the manufactured housing market. The kits are used to upgrade Evcon/Coleman, Nordyne/Miller/ Intertherm, or AirPro gas and electric furnaces for cooling and heat pump duty. Kits available include blowers for up to 4 tons of air conditioning, control boxes, insulation kits, filter kits, and evaporator coil shelves. Blower kits for gas furnaces are shipped without controls. Order the control box from accessory usage chart. Blower kits for electric furnaces are shipped with controls. See accessory usage chart for details. All control box kits are designed to operate with a minimum 4-wire thermostat. Quick connect wire harnesses are shipped with the appropriate blower kit or control box for ease of installation. Sheet metal adapter plates also are included with the blower kits that are needed to adapt the blower with the furnace. THE KMACC CONTROLS KMACC controls are required on furnaces that are not air conditioning ready. See the Accessory Usage Table located in this publication. Model number nomenclature coils C F 5 A X A C Coil F Manufactured Home, Uncased, A-Coil A Standard 024, 2 Ton 036, 3 Ton 048, 4 Ton /16 In. Casing Width /2 In. Casing Width In. Casing Width /2 In. Casing Width In. Casing Width Not Used 5 Upflow/Downflow Major Series Change 2

3 Model number nomenclature blowers and control boxes K M A BA TG K Accessory M Manufactured Housing A Series 3TG 3-Ton Blower for Gas Furnaces 4TG 4-Ton Blower for Gas Furnaces 3TE 3-Ton Blower for Electric Furnaces 4TE 4-Ton Blower for Electric Furnaces 4WG 4-Wire Control for Gas Furnaces E14 4-Wire Control for E1EH and E2EH Electric Furnaces FE4 4-Wire Control for FE, E1EH and E2EH Electric Furnaces CRI Coil Shelf and Insulation for Evcon Electric Furnaces NFK Filter Kit for Nordyne Electric Furnaces BA Blower Assembly CC Cooling Controls CR Coil Shelf Kit FK Filter Kit IK Insulation Kit Part Number Single Pack E1I Insulation Kit for E1EH and E2EH Furnaces UNITARY HEAT PUMP UNITARY AIR CONDITIONING MANUFACTURER CERTIFIED TO ARI AS COMPLYING WITH ARI EQUIPMENT STANDARD 240 MANUFACTURER CERTIFIED TO ARI AS COMPLYING WITH ARI EQUIPMENT STANDARD 210 CERTIFICATION APPLIES ONLY WHEN THE COMPLETE SYSTEM IS LISTED WITH ARI. ACCURATER PISTON CHART UNIT SIZE PISTON IDENTIFICATION NO

4 Dimensions CF5A B (192.0) (147.5) (319.5) A (61.0) 16 (406.4) C (34.3) (183.6) (28.6) 5 16 (8.4) (452.0) (27.0) 19 (483.1) 3 4 IN. NPT DRAIN (19.1) FRONT RIGHT SIDE CF5A COIL A00019 A B C SHIPPING WEIGHT UNITS In. mm In. mm In. mm Lb. Kg. CF5A / / / /20 8.6/9 CF5A / / / /23 10/10.4 CF5A / / / / /10.8 Physical data MODEL CF5A OPERATING WEIGHT (Lb) REFRIGERANT R-22 or Puron Refrigerant Control Bypass AccuRater Piston COIL Uncased A-Type, Aluminum Fins Rows Fins/In Face Area (Sq Ft) Nominal CFM CONNECTION Mechanical Vapor (In. ID) 5/8 3/4 Liquid (In. ID) 3/8 OPTIONAL EQUIPMENT TXV (Hard Shutoff) KSATX0801HSO KSATX0901HSO 4

5 Dimensions blower A B C D A97119 BLOWER MODEL A B C D KMABA01013TG 7-3/8 9-5/8 KMABA02014TG 7-1/2 10 KMABA03013TE 7-3/8 9-5/8 17-3/4 15-1/4 KMABA04014TE 7-1/2 10 KMABA05013TE 7-3/8 9-5/8 KMABA06014TE 7-1/2 10 COIL STATIC PRESSURE DROP (IN. WC) UNIT SIZE BULB AIR QUANTITY (CFM) WET DRY WET DRY 048 WET DRY

6 Performance data GROSS COOLING CAPACITIES (MBtuh) INDOOR SATURATED TEMPERATURE LEAVING EVAPORATOR ( F) COIL AIR CFM EWB ( F) TCG SHG BF TCG SHG BF TCG SHG BF TCG SHG BF TCG SHG BF BF Bypass Factor CFM Cubic Ft per Minute EWB Entering Wet Bulb ( F) SHG Gross Sensible Capacity 1000 Btuh TCG Gross Cooling Capacity 1000 Btuh CF5A CF5A CF5A Direct interpolation is permissible. Do not extrapolate. 4. SHC is based on 80 F db temperature of air entering coil. Below 80 F db, subtract (Correction Factor x CFM) from SHC. Above 80 F db, add (Correction Factor x CFM) to SHC. 5. All data points are based on 10 F superheat leaving coil. NOTES: 1. Contact manufacturer for cooling capacities at conditions other than shown in table. 2. Formulas: sensible heat cap. Leaving db = entering db 1.09 x CFM Leaving wb = wb corresponding to enthalpy of air leaving coil (h lwb ) total capacity (Btuh) h lwb = h ewb 4.5 x CFM where h ewb = enthalpy of air entering coil. BYPASS FACTOR SHC CORRECTION FACTOR ENTERING AIR DRY-BULB TEMPERATURE ( F) Under Over 85 Correction Factor Interpolation is permissible. Correction Factor = 1.09 x (1 BF) x (db 80) Use formula shown below. 6

7 Electrical data blower BLOWER MODEL FLA Full Load Amps Performance data blower Physical data blower Accessory usage VOLTS/PHASE Maximum OPERATING VOLTAGE Minimum KMABA01013TG 115/ KMABA02014TG 115/ KMABA03013TE / KMABA04014TE / KMABA05013TE / KMABA06014TE / KMABA BLOWER MODEL 01013TG 02014TG 03013TE 04014TE 05013TE 06014TE MOTOR Hp (PSC) 1/2 1/2 1/2 3/4 1/2 3/4 RPM SPEEDS MAXIMUM COOLING CAPACITY 3 ton 4 ton 3 ton 4 ton 3 ton 4 ton KMABA BLOWER MODEL 01013TG 02014TG 03013TE 04014TE 05013TE 06014TE SHIPPING WEIGHT (Lb) BLOWER TYPE Direct Drive AIR DISCHARGE Downflow WHEEL DIAMETER (In.) 10-1/2 11-1/2 10-1/2 11-1/2 10-1/2 11-1/2 WHEEL WIDTH (In.) 8 ACCESSORY KIT NO. USED WITH Evcon/Coleman/AirPro Nordyne/Miller/Intertherm Gas Furnaces Electric Furnaces Gas Furnaces Electric Furnaces DGRT A 7900 DGRT B DGAT A 3500A8 EB A EB B MGHA MGBA MGBB MGHB BLOWER PACKAGES KMABA01013TG X* X X X KMABA02014TG X* X X X X X KMABA03013TE X** KMABA04014TE X** KMABA05013TE X** X** X** KMABA06014TE X** X** X** CONTROL BOXES KMACC02014WG X X X KMACC0401E14 X KMACC0601FE4 X X X FILTER KIT KMAFK0101NFK X X X X INSULATION KITS KMAIK0101E1I X COIL SHELF KIT KMACR0101CRI X X * Requires additional control box kit. Only required on high static 3-ton applications. Only required on 3-1/2-ton and 4-ton applications. ** Blower package comes with necessary control box. Only required if using existing furnace blower. Only required if using existing furnace blower. Control box kit KMACC0601 is multi-purpose and can be used with a variety of electric furnaces as shown in the table. X Indicates recommended use of product. E1EB E2EB E1EH E2EH FLA FEBA FEBB FEH2 FEHB 7

8 Copyright 2001 Carrier Corporation Indianapolis, IN Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations. Book 1 4 Page 8 Catalog No. 02CF-5A1 Printed in U.S.A. PC 101 Form CF5A-4PD Tab 3d 2d Replaces: CF5A-3PD