THREADING TURNING MILLING BROACHING RUBBING HONING SPINNING LAPPING HOBBING DRILLING
|
|
- Kerrie Daniels
- 6 years ago
- Views:
Transcription
1 Oil mist separation and filter systems HIGHLY EFFICIENT AIR FILTRATION (STATUS 07/2014) THREADING TURNING MILLING BROACHING RUBBING HONING SPINNING LAPPING HOBBING DRILLING We set air in motion
2 2 We set air in motion TEKA 3nine emulsion- and oil mist separators TEKA 3nine products are special products for filtration, protection and re-utilization of oil and emulsion mists. TEKA 3nine products not only help thousands of companies world wide to lower unnecessary costs of operation but also contribute to a greener metal processing industry in general. 1 Recycling x Reduction Saving of heat costs Recycling The worldwide investments into 3nine oil mist separators surpass 7000 units. These units segregate more than 2.9 million litres of oil annually. This equals 64 truckloads of recycled oil for the metal processing industries. / CO 2 Reduction Conventional technologies collect oil mist inside the filter medium (f.e. mechanical and rotating filters) and require frequent filter changes. The TEKA 3nine solutions liberate the world of thousands of used filters that otherwise would have needed to be disposed of as toxic waste. Reduced consumption rate of filters also leads to reduced transporting costs. In combination with the reduced disposing costs this means one thing: We help companies reduce CO 2 emissions. Heat cost savings The air that is separated by our oil mist separator is slightly warmed-up in the machining center before it is returned into the production hall. That way the energy consumption decreases in many companies. In combination with the cleaned air the operating costs of your company are reduced even more.
3 3 Functional principle of TEKA 3nine oil mist separators 1 1. The core piece of the technology consists of a rotor with 2 lamellas (plates). The motor driven rotation causes a suction of the oil mist from the machining center into the oil mist separator. 2. Inside the plate package the centrifugal power causes the liquid particles to be flinged against the conic plates. The particles merge and become bigger and heavier. The bigger they become the faster they move while being pressed to the inner walls of the unit housing The seperated coolant/oil is being captured in a 4 collecting tray or redirected to the tank of the machining center. 4. Particles smaller than 1μm are separated into the additional HEPA Filter H13. Schematic depiction Deposition of droplets and particles in the lamella stack. The droplets coalesce and flow outward. Clean air helps to transport the separated coolant to the outlet. Larger droplets leave the lamella stack and are pressed against the wall. Pure air is directed upwards.
4 4 We set air in motion Technology The technology to separate liquid from the gas has been developed over 100 years ago. In the last ten years TEKA 3nine signed about 100 patents for this technology and is the global patents leader with a share of more than 40%. Safe working environment Emulsion and oil mist can cause serious health damage. Due to the high purity of our systems, the clean air is redirected back into the production environment. A healthy working environment is maintained. Due to clean air, the risk of oil film formation in the production hall is minimized and optimum clean working environment will help to ensure the health of your personnel. Your employees will be most thankful! Flexible solutions without pipelines TEKA 3nine systems are generally built directly onto the machines. A complex and very expensive laying of ducting is no longer needed, since the clean air is redirected back into the production environment. Your company gains additional production space and a relocation of the machine can be done very easily and flexibly. You save the costs of installation and cleaning of ducting. Collecting instead of disposing While other technologies capture particles in a filter medium (e.g. electrostatic, mechanical or rotating filter) the TEKA 3nine technology is based on plate separation. This allows the reutilization of the coolant and reduces maintenance costs to a bare minimum. The HEPA filter (H13) To grasp the finer particles of less than 1 μm, TEKA 3nine uses HEPA filters (H13). These are highly efficient filters that capture 99.97% of particles. Since most particles are already separated by the plate separation, the average lifespan of a filter will be months per filter if used for an average of one work shift a day. Deposition by plate separation 1% collected in HEPA-Filter Intelligent and revolutionary technology The unique patented technology separates the emulsion and oil mist by centrifugal force with particle sizes from 1 μm up to 99.9% from. This technology requires only minimal maintenance. The rotor inside of the 3nine systems consists of separation plates and separates the process air mist much more effectively than conventional rotary filters or cyclones. Since the press/suction power is generated by the rotor, no further blower, fan or propeller is required. Low operating costs Due to the high efficiency the largest share of oil and emulsion mist is continuously separated directly. The coolant can be re-utilized in the existing system circuit. The low loss of the coolant reduces costs. Filter change and production breaks are reduced to a minimum. All systems are designed for continuous operation to ensure maximum productivity.
5 5 Automatic cleaning system CIP With our automatic Cleaning in place -system (CIP) the air flow remains constant and does not break off. The CIP system uses clean coolant of the machining center to periodically flush the rotor and the plate package. Image: Fully automatic cleaning of the example of the oil mist separator CLARA (cross-sectional view) Image: The CIP-flushing system with auxiliary pump (detail view) Low maintenance system The CIP unit has an electronic box with a power pack and a timer. The operation of the CIP unit works by means of a rotary switch on the box. In comparison with other coercially available technologies TEKA 3nine products require very low maintenance. There is no manual cleaning required. Image: Functional principle of the CIP Cleaning Filter change Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec TEKA 3nine no manual cleaning required Mechanical fllter Electrostatic Filter Rotating Filter
6 6 We set air in motion Oil mist separator LINA Appropriate for Purifying mist of cooling lubricants in the workshop area, especially for small, enclosed machines with limited required suction. LINA is mounted directly onto the machine. This saves floor space and avoids unnecessary laying of ducting. In addition, the machines can be relocated easily in case of changing production needs. The operators of small machines are now offered the same flexible and maintenance-free solutions that come with the other products of TEKA 3nine, but at a lower cost. LINA offers high efficiency over its entire life cycle. LINA is a typical centrifugal separator and requires only a minimum of maintenance as the other products of TEKA 3nine. Due to the rotating blades inside, oil mist is separated much more efficiently than in conventional technologies, such as cyclones and rotating filters. For volumes up to 2 m³ Image: Oil mist separator LINA Technical data Suction/pressure power up to 900 Pa Operating temperature 5-50 C Voltage 3-phase 400V, 16A Effect consumption 0,55 kw Current 1,4 A Weight 54 kg Dimensions (L x W x H) 618 x 618 x 927 Inlet diameter 125 Noise < 65 db (A) Hue blue* Art. # *Different hues available on request
7 7 Accessories Floor stand Dimensions: 610 x 610 x Article No.: Wall mounting Article No.: Adjustable console Dimensions: 610 x 610 x Article No.: Filter monitor Messbereich: Pa Article No.: HEPA filter H13 Dimensions: 610 x 610 x 292 Article No.: HEPA filter fixture Dimensions: 610 x 610 Article No.: Prefilter package Contains prefilter F9, HEPA filter bracket, high and prefilter frame Article No.: Prefilter F9 Dimensions: 610 x 610 x 150 Article No.: Prefilter frame Article No.: HEPA filter bracket, high Article No.: Application photos Images may show optional equipment
8 8 We set air in motion Oil mist separator CLARA Appropriate for Purifying mist of cooling lubricants in the workshop area, particularly versatile and can be used with almost any working machine. CLARA is our best selling oil mist separator. It is suitable for most working machines. Clara is installed across Europe on virtually any type of working machine for a large number of customers. CLARA is a typical centrifugal separator and thus requires only a minimum of maintenance. Clara also prevails under extreme conditions with large amounts of solid particles, as they occur in the machining of cast iron and grinding. There is no risk of constipation like in a generic filter. Like the other products of TEKA 3nine CLARA offers a very high degree of purification. Due to the patented system of rotating disks the the oil mist is much more effectively separated than with conventional technologies, such as cyclones and rotating filters. Due to its low maintenance and compact design CLARA provides a high economic efficiency. Compared to conventional filter aggregates annual savings of operating costs of up to 50% are possible. CLARA is light, compact and can be mounted directly onto the hood of the machines. This saves floor space and avoids unnecessary laying of ducting. In addition, the machines can be easily relocated in case of changing production needs. For volumes up to 6 m³ Image: Oil mist separator CLARA Technical data Suction/pressure power up to 1000 Pa Operating temperature 5-50 C Voltage 3-phase 400V, 16A Effect consumption 1,5 kw Current 3,2 A Weight 89 kg Dimensions (L x W x H) 618 x 618 x 1098 Inlet diameter 160 Noise < 65 db (A) Hue blue* Art. # *Different hues available on request
9 9 Accessories Floor stand Dimensions: 610 x 610 x Article No.: Wall mounting Article No.: Adjustable console Dimensions: 610 x 610 x Article No.: Filter monitor Messbereich: Pa Article No.: HEPA filter H13 Dimensions: 610 x 610 x 292 Article No.: HEPA filter fixture Dimensions: 610 x 610 Article No.: Prefilter package Contains prefilter F9, HEPA filter bracket, high and prefilter frame Article No.: Prefilter F9 Dimensions: 610 x 610 x 150 Article No.: Prefilter frame Article No.: HEPA filter bracket, high Article No.: Application photos Images may show optional equipment
10 10 We set air in motion Oil mist separator EMMA Appropriate for Purifying mist of cooling lubricants in the workshop area, especially where high flow rates are required. Can be connected in series to further increase the performance. EMMA is the largest member of 3nine BLUE LINE series. The device is specifically designed for applications where high flow rates are required, for example for very large or open working machines. In addition, several units can be linked together by TEKA 3nines module system to cope with volume flows over 2500 m³/h. Like the other TEKA 3nine products EMMA is a typical centrifugal separator and requires only a minimum of maintenance. Compared to conventional filtration units you halve your annual operating costs. EMMA is extremely compact in relation to its capacity - with its dimensions the unit is only one third the size of a corresponding filter unit. Therefore, EMMA can be mounted directly on machines, allowing you to gain ground surface and avoid unnecessary laying of ducting. For volumes up to 15 m³ Image: Oil mist separator EMMA Technical data Suction/pressure power up to 1500 Pa Operating temperature 5-50 C Voltage 3-phase 400V, 16A Effect consumption 5,5 kw Current 11,3 A Weight 131 kg Dimensions (L x W x H) 700 x 700 x 1144 Inlet diameter 315 Noise < 70 db (A) Hue blue* Art. # *Different hues available on request
11 11 Accessories Floor stand Dimensions: 610 x 610 x Article No.: Wall mounting Article No.: Adjustable console Dimensions: 610 x 610 x Article No.: Filter monitor Messbereich: Pa Article No.: HEPA filter H13 Dimensions: 610 x 610 x 292 Article No.: HEPA filter fixture Dimensions: 610 x 610 Article No.: Prefilter package Contains prefilter F9, HEPA filter bracket, high and prefilter frame Article No.: Prefilter F9 Dimensions: 610 x 610 x 150 Article No.: Prefilter frame Article No.: HEPA Bügel Article No.: Application photos Images may show optional equipment
12 12 We set air in motion Oil mist separator PETRA Appropriate for Purifying mist of cooling lubricants in the workshop area, particularly for applications with large amounts of solid particles (grinding, die casting and machining of cast iron). PETRA is based on an enhanced development of the technology that is used in other devices of the TEKA 3nine family. The machine is specially designed for applications where large quantities of solid particles occur. Some examples of such applications include grinding, curing, casting and machining of cast iron. PETRA can ideally be mounted directly on any machine. You save floor space and avoid unnecessary laying of ducting and maintenance of the ductings, which would otherwise be required for this type of processing due to the release of large amounts of particles and debris. In addition, the machines can be put easily in case of changing production needs. PETRA is a typical centrifugal separator and requires, like the other products of 3nine, only a minimum of maintenance. Due to the rotating blades inside, oil mist is separated much more efficiently than in conventional technologies, such as cyclones and rotating filters. For volumes up to 6 m³ Image: Oil mist separator PETRA Technical data Suction/pressure power bis 1500 Pa Operating temperature 5-50 C Voltage 3-Phasen 400V, 16A Effect consumption 1,5 kw Current 3,2 A Weight 96 kg Dimensions (L x W x H) 610 x 610 x 1159 Inlet diameter 160 Noise < 70 db (A) Hue blue* Art. # *Different hues available on request
13 13 Accessories Floor stand Dimensions: 610 x 610 x Article No.: Wall mounting Dimensions: 610 x 610 x 50 Article No.: Adjustable console Dimensions: 610 x 610 x Article No.: HEPA filter H13 Dimensions: 610 x 610 x 292 Article No.: Filter monitor Messbereich: Pa Article No.: Prefilter package Contains prefilter F9, HEPA filter bracket, high and prefilter frame Article No.: Prefilter F9 Dimensions: 610 x 610 x 150 Article No.: Prefilter frame Article No.: HEPA filter bracket, high Article No.: Application photos Images may show optional equipment
14 NOTES 14 We set air in motion
15 15 NOTES
16 TEKA Absaug- und Entsorgungstechnologie GmbH Industriestraße Velen Germany Tel Fax info@teka.eu We set air in motion
Operating Instructions
Operating Instructions TEKA Cartmaster Type PF-W 1, PF-W 2 TEKA Absaug- und Entsorgungstechnologie GmbH Industriestraße 13 D-46342 Velen Postfach 1137 D-46334 Velen Tel.: +49 (0) 2863 9282-0 Fax: +49 (0)
More informationHeat Recovery Systems PTG, SWT Series.
Heat Recovery Systems PTG, SWT Series www.kaeser.com Why recover heat? The question should in fact be: Why not recover heat? Amazingly, almost 100 percent of the electrical energy input to a compressor
More informationIndustrial Dust Aspiration Solutions. For optimal protection of plant and environment.
Bühler GmbH DE-92339 Beilngries Deutschland T + 49 8461 701 0 F +49 8461 701 133 grain-logistics@buhlergroup.com Buhlergroup.com/grain-logistics GL_CB_Dust_Aspriation_Systems_EN_14004_02 Dust Aspiration
More informationOperating Instructions
Operating Instructions Typ TEKA CAREMASTER TEKA Absaug- und Entsorgungstechnologie GmbH Industriestraße 13 D-46342 Velen Postfach 1137 D-46334 Velen Tel.: +49 (0) 2863 9282-0 Fax: +49 (0) 2863 9282-72
More informationOperating instructions
Operating instructions (Translation of the original operating instructions) Type TEKA FILTERCUBE-MV TEKA Absaug- und Entsorgungstechnologie GmbH Industriestraße 13 D-46342 Velen Postfach 1137 D-46334 Velen
More informationSHN/SG SERIES ELECTROSTATIC MIST COLLECTORS. Clean air. It s what we do.
SHN/SG SERIES S ELECTROSTATIC MIST COLLECTORS SHN/SG SERIES THE complete solution TO A REVOLUTIONARY oil APPROACH smoke TOAND coolant INDUSTRIAL DUST mist PROBLEMS COLLECTION. IN THE INDUSTRIAL WORK AREA.
More informationFILTERCUBE 2N We set air in motion
FILTERCUBE 2N 2500 Central filter unit. Appropriate to many suction tasks for several working places at the same time for jobs using non-alloyed metals and precious metals, galvanized material and aluminium.
More informationSivu 2/8 Rate data Description Suomi Shut off times total 0.0 h/day Weekends with shut off times yes Daytime rate of heat pump Time for daytime rate 5
Sivu 1/8 Design of a heat pump heating system with Aquarea Designer Project: Suomi 1 Date: Created by:?, (no data provided), (no data provided) Phone: (no data provided) Email: (no data provided) Building
More informationCONDENSATE MANAGEMENT
CONDENSATE MANAGEMENT Innovative and integrated Systems Solutions Filtration Solutions from Donaldson Donaldson is a leading global manufacturer of filtration systems. The company, which was founded in
More informationOil Mist Separator Unit LGA 600 FUW
MAHLE Industrialfiltration is now Filtration Group For more information, visit wwwfiltrationgroupcom Oil Mist Separator Unit LGA 600 FUW Nominal volume flow 600 m³/h 1 Features High performance oil mist
More informationTREATMENT AND CONDITIONING OF DISMANTLED MATERIAL AND OPERATION WASTE IN EWN OVERVIEW. Rohde, Mathias
TREATMENT AND CONDITIONING OF DISMANTLED MATERIAL AND OPERATION WASTE IN EWN OVERVIEW Rohde, Mathias Content 1. Types of radioactive residuals 2. Treatment and conditioning facilities 3. Storage of radioactive
More informationHeat recovery. Heat recovery. Gas heating 280 up to 54,000 /year. Oil heating 284 up to 54,761 /year. Electrical power consumption
www.kaeser.com Heat Recovery Systems PTG, SWT Series Why recover heat? The question should in fact be: Why not recover heat? Amazingly, almost 100 percent of the electrical energy input to a compressor
More informationProduct overview Suction Guns, suction machines, Vac-Blast Cleaners
Product overview Suction Guns, suction machines, Vac-Blast Cleaners micro-cleaning for your products 3300_EN_20141020_Sauggeraete_Gesamtprogramm TiS Intelligent air utilisation Compressed air passes a
More informationCOMPRESSORS. Heat recovery. For hot air and hot water applications.
COMPRESSORS Heat recovery For hot air and hot water applications www.kaeser.com Heat recovery Why recover heat? The question should in fact be: Why not? Amazingly, 100 percent of the (electrical) energy
More informationHeat recovery systems. For hot air and hot water applications.
Heat recovery systems For hot air and hot water applications www.kaeser.com Heat recovery systems Why recover heat? The question should in fact be: Why not? Amazingly, practically 100 percent of the electrical
More informationRefrigeration and Boil Off Compression Systems for NGL Export Facilities
Refrigeration and Boil Off Compression Systems for NGL Export Facilities February 2015 2015 Gas/Electric Partnership Conference IHS INTERNATIONAL: US POISED TO LEAD WORLD EXPORTS OF LPG From Oil and Gas
More informationkl-direkt WIND POWER Towers Wet paint overspray Large components Zinc spraying processes Power head Fabrication processes Special edition: Wind Power
kl-direkt Special edition: Wind Power WIND POWER Towers Wet paint overspray Large components Zinc spraying processes Power head Fabrication processes Keller Information Keller Lufttechnik is a worldwide
More informationReliability & efficiency without compromise
01 GB Reliability & efficiency without compromise Rotary Screw Compressors Premium compressor design L50, L80, L140 First-class efficiency Efficiency Leader The L-Series from CompAir Well known in the
More informationLifestyle Electric Thermal Radiator
Lifestyle Electric Thermal Radiator Complies with Lot 20 Eco-design Heating Directive 2009/12/EC. Effective January 2018 ALUMINIUM Euro Edition Issue 1 August 2017 Next Day Delivery Order before 3.00pm
More informationLifestyle Electric Thermal Radiator
Lifestyle Electric Thermal Radiator Complies with Lot 20 Eco-design Heating Directive 2009/12/EC. Effective January 2018 ALUMINIUM Euro Edition Issue 1 August 2017 Next Day Delivery Order before 3.00pm
More informationEVOLUTION DUST COLLECTORS FOR MIST INDUSTRIES
DOWNFLO FILTRATION EVOLUTION TECHNOLOGY DUST COLLECTORS FOR MIST INDUSTRIES MIST COLLECTION For over 40 years, Donaldson has provided mist collection and filtration expertise into a range of mist-producing
More informationOil Mist Separator Unit LGA 600 FUW
Oil Mist Separator Unit LGA 600 FUW Nominal volume flow 600 m³/h 1 Features High performance oil mist separator unit for separation of coolant from tooling machine exhaust air Compact design High oil mist
More informationkl-direkt WIND POWER Towers Wet paint overspray Large components Zinc spraying processes Power head Fabrication processes
kl-direkt Special edition: Wind Power April 2009 WIND POWER Towers Wet paint overspray Large components Zinc spraying processes Power head Fabrication processes KL Information Keller Lufttechnik is a worldwide
More informationSmall size, big energy savings
ATOX coal mill 2 Small size, big energy savings Key benefits - Handles all types and capacities of coal - Reliable, long-lasting operation - Simple, flexible operation - Superior separation efficiency
More informationIngersoll Rand. Rotary Screw Air Compressors 5-15 hp (4-11 kw)
Ingersoll Rand Rotary Screw Air Compressors 5-15 hp (4-11 kw) A New Standard of Performance Ingersoll Rand Welcome to Ingersoll Rand s rotary air solutions, a new standard of performance. Achieve highest
More informationThe new standard. The advanced solar absorber tube. The collector for every budget. Efficient modular installation system
The new standard The advanced solar absorber tube The collector for every budget Efficient modular installation system Intelligent DRC system technology 1 The new standard AMK collectors the new standard
More informationSuction and filtering devices for laser emissions
Suction and filtering devices for laser emissions 1-2013 We set air in motion Contents Mobile suction and filter units Suction fan... 4 AEH-600 Suction unit... 5 FILTERCASE SL... 6 FILTERCASE LB... 7 AIRFILTER
More informationRENNER SCREW COMPRESSORS WATER-INJECTED 100% OIL-FREE COMPRESSED AIR Made in Germany
RENNER SCREW COMPRESSORS WATER-INJECTED 100% OIL-FREE COMPRESSED AIR Made in Germany Output: 18.5 to 45 kw RENNER SCREW COMPRESSORS WATER-INJECTED RSW 18.5 45, RSWF 30 45 RENNER The expert in oil-free
More informationLIQUID CHILLER HEAT PUMP kw 30RB/30RQ - R410A. A Multi-Talented Performer
LIQUID CHILLER HEAT PUMP 250-750 kw 30RB/30RQ - R410A A Multi-Talented Performer With more than 20,000 AQUASNAP units in operation on all continents this is not just a success story, it is the new reference
More informationGrinding & Dispersing. Ψ-MIX Inline-Disperser A revolutionary system for mixing and dispersing of solids in liquids. our technology YOUR SUCCESS
Grinding & Dispersing Ψ-MIX Inline-Disperser A revolutionary system for mixing and dispersing of solids in liquids our technology YOUR SUCCESS Ψ-MIX Inline-Disperser Innovative Dispersion Technology With
More informationBoulder County Comprehensive Drilling Plan Surface Owner Meeting. Thursday, Oct. 19, 2017
Boulder County Comprehensive Drilling Plan Surface Owner Meeting Thursday, Oct. 19, 2017 Contact Crestone Crestone Peak Resources Quick Facts www.crestonepeakresources.com cdpboulder@crestonepr.com (720)
More informationAtlas Copco. Oil-sealed rotary screw vacuum pumps GVS , cfm
Atlas Copco Oil-sealed rotary screw vacuum pumps GVS 30-400, 35-3000 cfm Reliable general vacuum for critical applications Atlas Copco, the industry leader in compressed air solutions, has transferred
More informationPAPER INDUSTRY PROCESS DESCRIPTION
PAPER INDUSTRY PROCESS DESCRIPTION Paper Industry PROCESS DESCRIPTION SUMMARY- PART 1. PAPER PASTE GENERATION 1. Raw material 2. First paper separation 3. Second paper separation 2 Paper Industry PROCESS
More informationTURBO BLOWER. High Efficiency / Low Noise / Oil Free / 60,000rpm High Speed Motor(PMSM) ISO-9001 REGISTERED FIRM Det Norske Veritas B.V.
Accredited by the RvA ISO-9001 REGISTERED FIRM Det Norske Veritas B.V.,NETHERLANDS TURBO BLOWER High Efficiency / Low Noise / Oil Free / 60,000rpm High Speed Motor(PMSM) KOREA FLUID MACHINERY CO., LTD.
More informationOil / Water Separators Ultrasep Superplus N and Ultraaqua Autoclean
Oil / Water Separators Ultrasep Superplus N and Ultraaqua Autoclean Condensate purification saves disposal costs Condensate purification with Ultrasep Superplus N With an oil content of 5% on average,
More informationCapture at Source FILTERMAX FILTER MODULES WITH AUTOMATIC CLEANING
FILTERMAX FilterMax is a complete filter solution for the entire workshop. Irrespective of whether you extract welding fumes or dust, use extraction arms or permanent built-in capture hoods, FILTER MODULES
More informationInternational PCT Patent Application No. PCT/GB2011/ Automag. Self-purging, fully automated magnetic filter
International PCT Patent Application No. PCT/GB2011/050029 Automag Self-purging, fully automated magnetic filter Automag self-purging magnetic filter The Automag magnetic filter uses powerful rare earth
More informationMembrane Dryer. Air inflow rate KMM Series to m 3 /min
Membrane Dryer Air inflow rate KMM Series 0.08 to. m /min Why is it necessary to dry compressed air? The atmospheric air drawn into a compressor is a mixture of gases that always contains water vapour.
More informationDistributed by: 2008 Ingersoll-Rand Company CCN IRITS
Ingersoll Rand Industrial Technologies provides products, services and solutions that enhance our customers energy efficiency, productivity and operations. Our diverse and innovative products range from
More informationNew standard in compressed air treatment, providing Energy Savings up to 99%
PCM Series Specification for APAC Model Flow Capacity (Nm 3 /min) Pressure Dew Point ( ) Power Consumption (kw) Power Supply (V/Ph/Hz) Inlet/Outlet Connections Weight (kg) Dimensions (H x W x D mm) Refrigerants
More informationThe fastest, most hygienic hand dryer.
The fastest, most hygienic hand dryer. The problem with other hand dryers Too slow Others take up to 43 seconds to dry hands.* Not always hygienic They suck in dirty washroom air and blow it back onto
More informationManual Centrifuges - Installation and Operation
Manual Centrifuges - Installation and Operation Please read before installation or first time usage Content: Introduction Safety Aspects Common Problems Troubleshooting Schematic of installation Centrifuge
More informationAIR PURIFIERS. Small problems quickly become BIG. Clean air solutions
AIR PURIFIERS Small problems quickly become BIG Clean solutions TAKE CARE OF YOUR SMALLEST PROBLEMS BEFORE THEY BECOME BIG Camfil s range of patented purifiers has the most efficient HEPA filters on the
More informationHot Water Generation for Commercial and Industrial Applications. Paul Marsden Specification Sales Manager
Hot Water Generation for Commercial and Industrial Applications Paul Marsden Specification Sales Manager Baxi and BDR Thermea Baxi is part of the BDR Thermea Group, a global manufacturer and distributor
More informationS.P. KINNEY MODEL A STRAINER
Water Strainers S.P. KINNEY MODEL A STRAINER APPLICATIONS The Model A is designed for continuous removal of suspended particles from all types of liquids. Applications are in industrial plants using river,
More informationThe leader in gas dehydration & filtration
The leader in gas dehydration & filtration wellhe ad production instrument and fuel gas l andfill & digester gas coal-bed methane off shore Van Gas Technologies specializes in natural gas and biogas dehydration
More informationFume Extraction Solutions. We care for your working environment.
Fume Extraction Solutions We care for your working environment. Zero-Smog Systems Weller Zero-Smog Systems offer two solutions for fume extraction: Tip Extraction Tip Extraction Suitable for applications
More informationRefrigeration dryers for energy efficient compressed air quality
01 GB Refrigeration dryers for energy efficient compressed air quality Energy efficient compressed air treatment F-HS series Innovative, energy efficient refrigerant dryers CompAir guaranteed long-term
More informationFume extraction system FEC.
TECHNOLOGY FOR THE WELDER S WORLD. Fume extraction system FEC. Weld fume extraction with cyclone technolgy! www.binzel-abicor.com Easy handling! Highest suction power. Fume extraction system FEC Harmful
More informationTRION Air Purification systems
TRION Air Purification systems TRION Air Boss ATS Purification systems Air Boss ATS There are certain things you expect from an air purification system. A perfect fit for your specific application...effectiveness...
More informationIdentification of Aberrant Railroad Wayside WILD and THD Detectors: Using Industry-wide Railroad Data. June 10, 2014
Identification of Aberrant Railroad Wayside WILD and THD Detectors: Using Industry-wide Railroad Data June 10, 2014 1 Agenda Background / Overview Solution Approach Groupings Criteria Sites Speed Weight
More informationKeller USA, Inc. Filtration of emissions. Capturing & extraction of process emissions. Return of clean air
Keller USA, Inc. Capturing & extraction of process emissions Filtration of emissions Return of clean air Dust Collection solution for dry dust filtration VARIO eco Modular design KLR-Filter, or Dry-P cartridge
More informationNEW INTELLIGENT AIR TECHNOLOGY
L Series L07 L11 (10 15 HP) Rotary Screw Compressors NEW INTELLIGENT AIR TECHNOLOGY L07 L11 ROTARY SCREW COMPRESSORS The L Series oil injected rotary screw compressors provide a range that combines high
More informationReliability & efficiency without compromise
01 GB Reliability & efficiency without compromise Rotary Screw Compressors Premium compressor design L160 L290 L160RS L290RS Fixed & Regulated Speed Where reliability is key The L-Series from CompAir Well
More informationStrategies for Summer Utility Savings. Residential Environmental Program Series May 15, 2013
Strategies for Summer Utility Savings Residential Environmental Program Series May 15, 2013 Are FC Summers Getting Hotter? 200 Fort Collins Annual Hours 90 F or Above 150 100 50 1970 1980 1990 2000 2010
More informationMultifunction pump for handling gaseous liquids in process engineering
Multifunction pump for handling gaseous liquids in process engineering Pumping liquids with a high gas content can be problematic, causing sharp losses in head and flow or even total cessation of pump
More informationInnovation in air purification unmatched air quality
Thermo Scientific Ductless Fume Hoods Innovation in air purification unmatched air quality Protects the operator from fume and particle hazards Easy to change filters Improved filter clamping eliminates
More informationPractical and Effective Approaches to Residential Ventilation for Production Builders
Practical and Effective Approaches to Residential Ventilation for Production Builders by Armin Rudd USDOE Building America Program for Affordable Comfort Conference 2002 Cincinnati, Ohio 18 April 2002
More informationPersonal Clean AirZone
Personal Clean AirZone Clear the air. We live in a world where clean air is a precious commodity. Indoors and out, the air we breathe contains many impurities. Surprisingly, the quality of air indoors
More informationIRRIGATION EQUIPMENT LTD. The Perfect Solution for Water Filtration and Irrigation Problems
IRRIGATION EQUIPMENT LTD. The Perfect Solution for Water Filtration and Irrigation Problems ODIS Filtration is The Heart of Every Irrigation System 12 TABLE OF CONTENTS Manifolds & Accessories... 2 Series
More informationBoulder County Comprehensive Drilling Plan Surface Owner Meeting. Thursday, Nov. 2, 2017
Boulder County Comprehensive Drilling Plan Surface Owner Meeting Thursday, Nov. 2, 2017 Contact Crestone Crestone Peak Resources Quick Facts www.crestonepeakresources.com cdpboulder@crestonepr.com (720)
More informationCork County Energy Agency
Cork County Energy Agency Energy Audit Midleton Area Office December 2009 Table of Contents 1. Introduction...1 2. Site description...2 3. On site energy use...3 3.1 Energy management...3 3.2 Breakdown
More informationWestinghouse UK AP1000 GENERIC DESIGN ASSESSMENT Resolution Plan for GI-AP1000-IH-01 Internal Fire Safety Case Substantiation.
Westinghouse UK AP1000 GENERIC DESIGN ASSESSMENT Internal Fire Safety Case Substantiation MAIN ASSESSMENT AREA RELATED ASSESSMENT AREA(S) RESOLUTION PLAN REVISION GDA ISSUE REVISION Internal Hazards Civil
More informationElectronic Air Cleaner Model Number CSC1000 OWNER S MANUAL. Installation Operation Basic Service Guide Technical Repair Guide Repair Parts
Electronic Air Cleaner Model Number CSC1000 UL Listed CSA Certified OWNER S MANUAL Installation Operation Basic Service Guide Technical Repair Guide Repair Parts Please read and familiarize yourself with
More informationBetter Buildings By Design 2013 Building the Renewable Energy Ready Home Solar Thermal Lessons Learned and Results
Image Courtesy of Harvestar Better Buildings By Design 2013 Building the Renewable Energy Ready Home Solar Thermal Lessons Learned and Results Doug Merrill, Sunward Systems Doug Merrill 20 + years of manufacturing
More informationIncrease production reduce costs Compact filter MAXFLOW in a precision grinding works
Increase production reduce costs Compact filter MAXFLOW in a precision grinding works Whether brake discs, ball bearing liners or transmission housings the automotive industry depends on high-precision
More informationIngersoll Rand 5-15 hp. Rotary Screw Compressors
Ingersoll Rand 5-15 hp Rotary Screw Compressors A New Standard of Performance Ingersoll Rand Achieve Highest Productivity and Lowest Total Cost-of-Ownership. Boost Your Profitability Boosting your company
More informationMr. GoodTower Service Center
GTSC-E 0615 Mr. GoodTower Service Center Specialists in Replacement Parts and Maintenance of Evaporative Cooling Equipment Call now for a free inspection on your Evaporative Cooling equipment to: Extend
More informationDelivering More Clean Air, At a Faster Rate With Less Noise
Our philosophy Blueair believes in cleaner indoor air for everyone. Removing air impurities down to the tiniest particle requires a deep commitment to continuous innovation and a greener global environment.
More informationTime-Based Scheduling of Residential Ventilation
Time-Based Scheduling of Residential Ventilation by Armin Rudd USDOE Building America Program for EEBA Conference 2000 Building for Peak Performance Denver, Colorado 26 October 2000 Climate Specific Design
More informationIngersoll Rand kw Single Stage Contact-cooled rotary screw air compressors
Ingersoll Rand 37-75 kw Single Stage Contact-cooled rotary screw air compressors Reliability and Energy Efficiency at Your Fingertips Ingersoll Rand Competing in today s business environment requires manufacturers
More informationScrew Compressors ESN Fixed Speed & VS 250 Variable Speed
Screw Compressors ESN 160-250 Fixed Speed & VS 250 Variable Speed Rely on GD to provide the perfect fit Built for 24/7 use in demanding applications Gardner Denver designed the ESN 160-250 and VS250 series
More informationLess downtime. Better product quality. No odour. No more sticky tools. Reduced allergic reactions. Reduced tool wear
Alfie 500 Less downtime Better product quality No more sticky tools No odour Reduced allergic reactions Reduced tool wear Clean coolants save more than you think For the metalworking industry, coolants
More informationCompact. Efficient. TROX.
Compact. Efficient. TROX. The art of handling air TROX understands the art of handling air like no other company. Since its foundation in 1951, TROX has been developing and manufacturing sophisticated
More informationThe Ed Roberts Campus Berkeley, CA
The Ed Roberts Campus Berkeley, CA Anderson Clemenceau Mechanical Option Penn State A.E. Senior Thesis April 14, 2015 Leddy Maytum Stacy Architects, Photo by Tim Griffith ASHRAE Climate Zone 3C 99.6% Heating
More informationHigh Productivity Dry Hobbing System
27 High Productivity Dry Hobbing System Takahide Tokawa *1 Yukihisa Nishimura *1 Yozo Nakamura *1 Conventional hobbing requires coolant, whose use complicates the work process and whose disposal endangers
More informationFiltering Ideas, Making Innovations
Filtering Ideas, Making Innovations Company WHO WE ARE Apexfil is a company whose technology was developed for perfect performance in filtration market for hydraulic lubrication systems, refrigeration,
More informationDiscover ebm-papst in commercial kitchen equipment. Durable and reliable products for constant use.
Discover ebm-papst in commercial kitchen equipment. Durable and reliable products for constant use. About ebm-papst. As a leader in technologies for ventilation and drive engineering, ebm-papst is in demand
More informationGlobal Series Screw Air Compressors Life source of industries
Global Series Screw Air Compressors Life source of industries 125-200 HP series Global Series Elgi, established in 1960, designs and manufactures a wide range of compressors. The company has gained its
More informationProMoss TM Plant-Based Water Treatment Solves Problems in Tobacco Manufacturing Plant Air Washer Systems
Case Study ProMoss TM Plant-Based Water Treatment Solves Problems in Tobacco Manufacturing Plant Air Washer Systems Steve Chewning, CWT, James Hall, Southeastern Laboratories, Inc. August 2017 Air washer
More informationDrying and cleaning plant for reprocessing of plastics
Drying and cleaning plant for reprocessing of plastics innovative washing without water sustainable enormous cost savings reliable constant high quality Plastics recycling with the DRD system innovative
More informationGB 01 ROTARY SCREW COMPRESSORS FIXED SPEED REGULATED SPEED (RS) L 23 L29 L23RS L29RS INTELLIGENT AIR TECHNOLOGY
GB 01 ROTARY SCREW COMPRESSORS FIXED SPEED REGULATED SPEED (RS) L 23 L29 L23RS L29RS INTELLIGENT AIR TECHNOLOGY INTELLIGENT AIR TECHNOLOGY FROM 22 30 kw FIXED AND REGULATED SPEED Engineering Excellence
More informationTumbler Screening Machines TSM / tsi. Maximum screening quality for fine and ultra-fine products
Tumbler Screening Machines TSM / tsi Maximum screening quality for fine and ultra-fine products 2 I 3 Tumbler Screening Machines TSM / tsi For intelligent fine particle screening The highly developed genuine
More informationHEPASilent Air Purification Systems. Clean air is a human right
HEPASilent Air Purification Systems Clean air is a human right 10 tips for choosing the best air purifier 1 Filter efficiency When selecting an air purifier, consider performance first. Compare air purifiers
More informationRSW D / RSWF D water-injected, with direct drive
Oil-free screw compressors RSW D / RSWF D water-injected, with direct drive Made in Germany Motor power: 18.5 to 10.0 kw Water-injected screw compressors RENNER oil-free, water-injected screw compressors
More informationFRESHBOX 100. Single-room heat recovery unit. Air flow up to 59 CFM Heat recovery efficiency up to 96 %
Single-room heat recovery unit Air flow up to 59 CFM Heat recovery efficiency up to 96 % 2018 SINGLE-ROOM HEAT RECOVERY UNITS Features Efficient solution for supply and exhaust ventilation of enclosed
More informationTable 1. Exposure Control Methods for Selected Construction Operations
Using Stationary Masonry Saws Use saw equipped with integrated water delivery system. Change water frequently to avoid silt build-up in water. Prevent wet slurry from accumulating and drying. When working
More informationAgglomerates from Plastic Waste
Agglomerates from Plastic Waste Agglomerates PALLMANN Plast-Agglomerator from Plastic Waste PFV 100% Utilization of Plastics! Worldwide the amount of so-called post-consumer waste from plastic film, -
More informationOIL/WATER SEPARATORS. Compressed Air & Process Filtration
DS OIL/WATER SEPARATORS Compressed Air & Process Filtration DS OIL/WATER SEPARATORS LEADING THE WAY IN AIR PURIFICATION As one of the world s leading manufacturers of compressed air purification equipment
More informationRespirable Crystalline Silica Exposure Control Plan
1.0 Purpose The purpose of this document is to establish and implement a written exposure control plan that identifies tasks involving silica exposure and methods used to protect employees. University
More informationUse saw equipped with integrated water delivery system that continuously feeds water to the blade.
1926.1153 Respirable crystalline silica. (c) Specified exposure control methods. (1) For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering
More informationACO Marine Advanced wastewater solutions for the marine and offshore market
ACO Marine Advanced wastewater solutions for the marine and offshore market ACO Marine environmental solutions for the marine and offshore market ACO Marine is a member of the international ACO Group
More informationDehumidification: Energy Efficiency Comparisons
Fourth Annual Energy Management Workshop Cocoa, Florida February 10-11, 2003 Dehumidification: Energy Efficiency Comparisons Michael K. West, Ph.D., P.E. Building Systems Scientist Advantek Consulting,
More informationHEPASilent Air Purification Systems. Clean air is a human right
HEPASilent Air Purification Systems Clean air is a human right 10 tips for choosing the best air purifier 1 Filter efficiency When selecting an air purifier, consider performance first. Compare air purifiers
More informationTri-County Transportation & Land Use Study. Steering Committee Meeting May 14, 2009
Tri-County Transportation & Land Use Study Steering Committee Meeting May 14, 2009 Agenda Recap of Study Goals and Objectives Update on CV Land Use Model: Business as Usual (BAU) Growth Scenario Pros vs
More informationEfficient Cleaning and Grading
Efficient Cleaning and Grading Pre-cleaning Reduces Costs for Drying and Ensures Safe Storage Kongskilde is one of the leading suppliers of pneumatic grain conveying equipment. Kongskilde introduced the
More informationRefrigeration Compressed Air Dryer Boreas Variopulse
Refrigeration Compressed Air Dryer Boreas Variopulse The intelligent refrigeration compressed air Why is compressed air processed? Compressed air is an essential form of driving and process energy in all
More informationVenturi wet scrubber VDN Separation of combustible, explosive, humid and adhesive dusts
Venturi wet scrubber VDN Separation of combustible, explosive, humid and adhesive dusts Compact wet scrubber VDN-E with detachable disposal bin Function For combustible, explosive, humid and adhesive dusts
More informationAebi MFH 2500: Get your own back on dirt.
Aebi MFH 2500 Aebi MFH 2500: Get your own back on dirt. The Aebi MFH 2500 represents the latest generation in road-sweeping machines, allowing greater efficiency. With the compact dimensions of a small
More informationAutomag. Self-purging, fully automated magnetic filter
Automag Self-purging, fully automated magnetic filter The benefits of automated magnetic filtration No consumables required Automag only requires small amounts of compressed air, which powers the process.
More information