Chilled Beam/Induction Unit

Size: px
Start display at page:

Download "Chilled Beam/Induction Unit"

Transcription

1 For the energy efficient buildings of today and tomorrow Chilled Beam/Induction Unit All Way Blow Chilled Beam Technical Specifications American Owned and Operated

2 Chilled Beam/Induction Unit A Chilled Beam takes a source of primary air at a maximum inlet static pressure of 1 WC. It distributes this air through a bank of specially designed aerodynamic nozzles and discharges the air at a high velocity into a mixing chamber. This creates a differential pressure which enables a draw of room air across a coil. This imparts either sensible cooling or heating to the air as it passes over the coil. The primary air and induced air are mixed and discharged through a grille in a coanda effect air distribution at the ceiling. This air circulates throughout the room and is gently drawn back up through the return section of the Chilled Beam grille. Because the return air to the terminal is located at the ceiling and is moving so gently, dirt is not carried along with it and filters are not required to protect the coils. This eliminates the cost and labor required for this routine maintenance. Chilled Beams are extremely flexible and enhance the savings and effectiveness of primary air systems such as those using dedicated outside air. When using our Chilled Beams, the primary air system, which includes the dedicated outside air unit and the supply and exhaust ductwork, can be sized to handle only the required ventilation air. This reduces the size of the equipment and ductwork making it easier to fit into a building space. This also reduces the energy required to supply the ventilation to the building. The total room air circulation is created solely by the induction principle within the terminal; therefore, there is no electric motor requiring an electric power source or maintenance for a fan and motor. As a result, the Chilled Beam is a very quiet and efficient way to provide comfort in a space. Model MiniQ360 All Way Blow Ceiling Mounted Induction Unit The model MiniQ360 is a ceiling mounted Chilled Beam that blows in all directions and provides the very best in air distribution. These units are a smaller 2 x 2 version of the model Q360. They are 24 x 24 and fit neatly into a 2 x 2 ceiling grid. The MiniQ360 is supplied with a concentric supply/return diffuser. The MiniQ360 can handle between 60 an 150 CFM of primary air and is perfect for the smaller spaces that still require a multi directional blow. These units are available in 2- and 4-pipe configurations. These units have drain pans and are capable of doing both sensible and latent conditioning in the occupied space.

3 Model Nomenclature UNIT Mini Q360 = 360 Degree Blow Overhead PIPE 2 = 2-Pipe 4 = 4-Pipe HANGING OPTION A = Mounting Bracket B = Eye Bolt GRILLE A = Lay-in Diffuser B = Surface Mount Model Number MiniQ A A A A 3 NOZZLE SERIES 24 = Low Capacity 31 = Medium Capacity 38 = High Capacity DRAIN PAN OPTION A = Float Switch B = Plenum Rated Float Switch C = Trap D = Plug LINT FILTER A = No Filter B = 12 x 12 Disposable Filter C = 12 x 12 Washable Filter HEIGHT EXTENSION COLLAR 1 6 represents collar height in inches Model Specifications Standard Dimensions: 23 3/4 long x 23 3/4 wide x 15 high (including grille) Weight Dry: 70 pounds Water Volume: 1.5 gallons Weight Wet: 90 pounds Induction Unit Construction: 20 gauge galvanized sheet metal construction Return Air Chamber: Insulated Aerodynamically designed Supply Air Plenum/Connection: One insulated supply air plenum/primary air chamber One 4 round collar for the primary air connection Induction Nozzles: Each unit contains one continuous 360 degree nozzle plate Nozzles available in various sizes Unipol-TM-DMDA-8920 Dow plastics food grade polyethylene; High density Fasteners: Pop rivet SSD62SSBS 3/16 DIA. X grip range Typical ultimate strength in pounds; Shear 1000; Tensile 1375 Stainless mandrel and rivet Coils: 2-Pipe System Options: One 2 row copper coil 3/4 OD 4-Pipe System Options: One 2 row copper coil 1 row cooling, 1 row heating 1/2 OD cooling 1/2 OD heating Sheet Metal: 16 gauge galvanized Fins: 10 aluminum fins per inch Tested at 350 PSI water pressure All coils are ARI performance certified to the most current standard 2-Pipe Units: There is one 3/4 CWS/HWS and one 3/4 CWR/HWR connection on every unit 4-Pipe Units: There is one 1/2 CWS and one 1/2 HWS connection on every unit There is one 1/2 CWR and one 1/2 HWR connection on every unit Drain Pans: Units have one 3/4 CPVC drain pan connection 1 1/2 deep with sloped bottom for drainage when required Drain pans can be supplied with a float safety switch, a trap, or a plug (sensible only applications) Grille: Lay-in grille available in various colors (powder coat) Surface mounted grille available in various colors (powder coat) Multiple units should not be installed in the ceiling less than 6 feet apart Insulation: SoundCoat Soundfoam M and M with surface film treatment. Acoustic quality, open cell, flexible polyether based urethane foam Tap: Units can be supplied with a pressure tap on the primary air collar for easy balancing

4 Mounting: Bracket for use with wire hanging systems Field supplied 1/4 rod connects to hanging brackets in 2 places on each side (see plan view drawing) Float Switches: Standard Potted (electrically water sealed) reed/magnet switch design UL 508 Plenum rated Switch components and wire are tested to UL 508 and UL 2043 No moving parts Prewired with 6-foot UL CMP cable LED indicator lights when switch cuts equipment Suitable for use in plenum spaces 24 volts AC class 2, 3 amp switching capacity Trap: Supplied in drainable drain pan application Bramec #0357 3/4 schedule 40 CPVC R-trap 2 Filters: Cleanable woven aluminum Disposable Height Extension Collar: Available from 1 to 6 to facilitate gravity drainage from drain pan Must be added to overall height dimension shown on drawing 1/2 FPT HWR 4" PRIMARY AIR CONNECTIOON /4" FPT CWR 1/2" FPT HWS 3/4" CWS /4" CONDENSATE DRAIN HANGING BAR On 2-Pipe units the hot water supply and return are eliminated and the chilled water supply and return become common. MiniQ360 Installation and Balancing Instructions INSTALLATION 1. Before opening the shipping carton that protects the MiniQ360, please inspect the packaging for signs of physical damage. Damage should be noted on Shippers Bill of Lading and report same to the shipper and to NuClimate Air Quality Systems. 2. The packaging for the MiniQ360 is made up of a base tray and an inverted box cover. Remove the box cover to fully expose the MiniQ360. There are four sides to the unit. This unit has an 4 round duct collar for connection to the primary air ductwork. The 2-pipe unit has one 3/4 FPT chilled/hot water supply connection and one 3/4 FPT chilled/hot water return connection. 3. When supplied, the flexible hose connections and valves are shipped separately. It is important to connect the supply water to the supply water connections and return water to the return water connections. These connections have been labeled for your convenience. 4. Each MiniQ360 unit has one 3/4 CPVC condensate pan connection. When not piping to a condensate drain, the unit will be supplied with a plug or a float switch (shipped separately). The float switch should be wired in series to the room controller to shut off the coil valve if sufficient condensate should build up. If multiple units are used in a single zone, these switches should be wired in series to the room controller. 5. There are two mounting brackets bolted to each side of the MiniQ360. These brackets will accept field supplied 1/4 all-

5 Port 3/4 FPT Return Connection 4 Round Duct Connection 3/4 FPT Supply Connection 3/4 CPVC Drain Connection thread rod to facilitate the hanging of this unit. These brackets can also be used for wire hanging systems such as Gripple. 6. The unit weighs approximately 90 pounds. Do not lift the unit by the drain pipes, water piping, or metal duct. It is suggested that all units be lifted using the mounting brackets. 7. Set the MiniQ360 on a cable lift or other lifting device to lift it above the ceiling level. Be careful to insure the lifting platform is wide enough to reach the outer shell of the MiniQ360. The center drain pan and coil should not and can not be used to support the unit. 8. To hang the unit, we recommend securing two Uni-Strut channels, 24 apart, to the building structure where the unit is to be hung. Secure two 1/4 all-thread rod about 20 apart on each channel so that they hang down to the top of where the MiniQ360 is to be hung. Raise the unit and screw the all-thread rod hanging from the building channels into the mounting brackets. The rod should be secured with a washer and lock nut. 9. Final elevation and horizontal adjustments can be made to align the unit with the diffuser. The mounting brackets have holes for the rod approximately every inch. The unit can be adjusted to meet the ceiling grid using these bracket holes, and by raising and lowering the unit to align with the ceiling by adjusting the nuts on the all-thread rod on the building channel. Prior to placing the unit in the ceiling grid, remove the two cotter pins that hold the supply/return section to the diffuser frame. CAUTION! (1) Failure to remove the cotter pins will prevent access to coils and internal workings of the MiniQ360 unit. (2) It is imperative that the unit and diffuser fit together tightly to insure proper system performance. 10. Attach the flexible hose piping assembly (if supplied) to the appropriate supply and return water connections of the unit. 11. A short section of insulated 4 flexible duct can be used to connect the primary air ductwork to the unit. Make sure that the flexible duct connection to the MiniQ360 is sealed air tight. A field supplied balancing damper should be provided in this primary air duct to facilitate the air supply balancing of each unit to the scheduled static pressure at the unit inlet. 12. The MiniQ360 unit is essentially maintenance free. We do recommend checking the coils once a year. To do this open the spring loaded diffuser portion of the grille. It is spring loaded to allow access by pushing from one side. Once the grille has been lowered check the coil for dust or debris. If any is present it can be removed with a shop vacuum. BALANCING PROCEDURE Background Chilled Beams are air induction devices that take the primary air source and direct this air through nozzles that create a lower pressure that draws room air over a coil. This induced air is then mixed with the primary air stream and is delivered through the grille to the room in a coanda air pattern. The amount of primary air each Chilled Beam takes is based on the inlet static pressure and all performance data has been tested. The Chilled Beams will function below and above these pressures but performance data has not been certified outside this range. Balancing Procedure To balance the air system for the Chilled Beams it is only necessary to adjust the inlet static pressure at each Chilled Beam to the values shown on the schedule for each room. The inlet static pressure should be read at the duct connection to each Chilled Beam. A static pressure tap is supplied on each Chilled Beam for a balancer to take their readings at. The capacity chart for the conditions of each project is included in our submittals and will show the primary air CFM, total CFM, sensible and latent capacities at each inlet pressure. This information varies linearly within the pressure range given and the air quantities can be interpreted safely within this range. Alternate Balancing Procedure If multiple Chilled Beams in a given space are not accessible to measure the static pressure at the inlet to each unit, they can be balanced as a group as follows: 1. Add up all the scheduled primary air to each Chilled Beam on a given primary air duct branch feeding a common area. 2. Adjust the damper to that branch to allow the primary air quantity determined above to the space. Since Chilled Beam units all operate linearly at static pressures between.4 to WC, all terminals on the primary air branch to a given space will operate at the common static pressure available in that branch duct that will produce the total primary air measured. 3. Total supply air is dependant on the primary air and static pressure at the unit. It can not be directly measured but is cataloged in our product literature.

6 2-Pipe Capacity Charts Minimum Flow Primary Total Induced GPM Air Air Air CLG HTG CLG HTG CLG HTG Leaving Air Leaving Air Leaving Fluid 55 Leaving Air Leaving Air Leaving Fluid 2,500 3, ,775 1, ,894 4, ,125 2, ,237 4, ,439 2, ,567 4, ,558 2, ,996 4, ,190 2, ,419 4, ,612 2, ,779 5, ,714 2, ,158 5, ,974 2, ,237 4, ,439 2, ,701 4, ,655 2, ,158 5, ,974 2, ,523 5, ,212 3, Leaving Air Leaving Fluid 4, , , , , , , , , , , , Leaving Air Leaving Fluid 9, , , , , , , , , , , , Maximum Flow Primary Total Induced GPM Air Air Air CLG HTG CLG HTG CLG HTG Leaving Air Leaving Air Leaving Fluid 55 Leaving Air Leaving Air Leaving Fluid 2,860 4, ,909 2, ,400 5, ,295 2, ,872 6, ,642 3, ,316 6, ,985 3, ,499 5, ,366 2, ,117 6, ,829 3, ,602 7, ,214 3, ,090 7, ,617 3, ,872 6, ,642 3, ,493 6, ,124 3, ,090 7, ,617 3, ,552 8, ,006 4, Leaving Air Leaving Fluid 4, , , , , , , , , , , , Leaving Air Leaving Fluid 10, , , , , , , , , , , ,

7 4-Pipe Capacity Charts Minimum Flow Primary Total Induced GPM Air Air Air CLG HTG CLG HTG CLG HTG EWT 45 Leaving Air Leaving Air Leaving Fluid EWT 55 Leaving Air Leaving Air Leaving Fluid 2,500 3, ,775 1, ,894 4, ,125 2, ,237 4, ,439 2, ,567 4, ,558 2, ,996 4, ,190 2, ,419 4, ,612 2, ,779 5, ,714 2, ,158 5, ,974 2, ,237 4, ,439 2, ,701 4, ,655 2, ,158 5, ,974 2, ,523 5, ,212 3, EWT 120 Leaving Air Leaving Fluid EWT 180 Leaving Air Leaving Fluid 3, , , , , , , , , , , , , , , , , , , , , , , , Maximum Flow Primary Total Induced GPM Air Air Air CLG HTG CLG HTG CLG HTG EWT 45 Leaving Air Leaving Air Leaving Fluid EWT 55 Leaving Air Leaving Air Leaving Fluid 2,860 4, ,909 2, ,400 5, ,295 2, ,872 6, ,642 3, ,316 6, ,985 3, ,499 5, ,366 2, ,117 6, ,829 3, ,602 7, ,214 3, ,090 7, ,617 3, ,872 6, ,642 3, ,493 6, ,124 3, ,090 7, ,617 3, ,552 8, ,006 4, EWT 120 Leaving Air Leaving Fluid EWT 180 Leaving Air Leaving Fluid 3, , , , , , , , , , , , , , , , , , , , , , , ,

8 The sample was tested in accordance with the ASHRAE standard Method of Testing for Rating the Performance of Air Outlets and Inlets, which incorporates ADC 1062: GRD-84 test code for grilles, registers, and diffusers. Acoustical data was obtained employing a Bruel & Kjaer digital frequency analyzer type 2131 and analyzed on a Compaq Prolinea 4/33 computer and Epson LQ-850 printer. The reference sound source used for this test was a calibrated Bruel & Kjaer type 4204, which conforms to the above standard. The octave band sound power levels were plotted on graph of Noise Criteria Curves which is in the ADC test code. These curves are reprinted with permission from the ASHRAE handbook and product directory, The sample was installed in the facility and supplied with measured volumes of air. The static pressure was measured 1 1/2 duct diameters upstream of the diffuser inlet. The sample was tested in general accordance with the ARI standard Forced-Circulation Air-Cooling and Air-Heating Coil. The sample was installed in the facility and supplied with measured volumes of air, measured temperatures of air and water, and measures GPM flow rates. The air static pressure was measured with the test samples built in pressure tap. Throw Terminal Velocity FT/MIN Room Ambient Temperature (Deg. F) 75 Model MiniQ360 Air Terminal with 23 3/4" x 23 3/4" 4-Way Ceiling Diffuser Throw Direction: Horizontal Primary Air Volume (CFM) 90 CFM Inlet (in. of H 2 O) Distance Distance From Diffuser (Feet) From Ceiling Inches Primary Air Volume (CFM) 112 CFM Inlet (in. of H 2 O) Distance Distance From Diffuser (Feet) From Ceiling Inches Primary Air Volume (CFM) 135 CFM Inlet (in. of H 2 O) Distance Distance From Diffuser (Feet) From Ceiling Inches Primary Air Volume (CFM) 155 CFM Inlet (in. of H 2 O) Distance Distance From Diffuser (Feet) From Ceiling Inches

9 Sound Test Data Sheet Non-Lagged Casing Octave Band Center Frequency Hertz MiniQ360 with 23 3/4" x 23 3/4" 4-Way Ceiling Diffuser Discharge Sound Power Level db re Watt * 37.0* * 38.5* * 45.0* * Supply Air Volume, CFM Inlet, in. H 2 O 1.2 **Noise Criteria (NC) * Sound power level data has reached ambient levels in the test room or is determined by instrument limitations. Actual levels are less than or equal to the levels indicated. ** Noise criteria ratings were determined by subtracting a room absorption of 10dB from the sound power level data Lagged Casing Octave Band Center Frequency Hertz MiniQ360 with 23 3/4" x 23 3/4" 4-Way Ceiling Diffuser Discharge Sound Power Level db re Watt * 37.0* * 38.5* * 45.0* * Supply Air Volume, CFM Inlet, in. H 2 O 1.2 **Noise Criteria (NC) * Sound power level data has reached ambient levels in the test room or is determined by instrument limitations. Actual levels are less than or equal to the levels indicated. ** Noise criteria ratings were determined by subtracting a room absorption of 10dB from the sound power level data

10 MiniQ360 Specifications PART 1 GENERAL 1 SUMMARY A. This section describes active Chilled Beams. 2 SUBMITTALS A. Submit as specified herein. B. Submit for review: a. Product data for all items. Data shall be complete with the following information: 1. Operating weight and dimensions of assembled units. 2. Performance data, including water-tube, airflow, water pressure drop, air-side pressure drop, and noise and air velocities. 3. Electrical connection details. 4. Construction details, including materials of construction and fastening methods. 3 WARRANTY A. Units shall be warranted against failures on parts for a period of 12 months from shipment or 18 months from startup, whichever occurs first. B. In warranty labor shall be the responsibility of the installing contractor. PART 2 PRODUCTS 2.01 MANUFACTURERS A. Units shall be as manufactured by NuClimate Air Quality Systems, model MiniQ360 with supplied 24 x 24 diffuser as specified on drawings. B. Considering the innovative technology utilized to engineer and manufacturer the applied equipment specified for this project the following substitution considerations shall apply to any manufacture requesting prior approval: a. Fifteen day prior to bid date any manufacturer who would like to be considered shall submit the following information via certified mail to the design professional. b. Audited financial statements demonstrating the capital strength of the manufacturer to be considered given the nature of the owners resource in the event of any product application challenges. c. Detailed organization chart listing all degreed engineers with resumes documenting their experience directly relating to high performance low pressure heat transfer systems. d. Company documentation of their channel of distribution for the manufacturer listing the local representative and the projects that the local representative has completed utilizing this specific technology. e. Complete listing of all installation the manufacturer has shipped nationally including school name, engineering firm, construction manager, and contacts. f. Submittal documentation for every product proposed including schedule and performance date for each with physical and thermal calculations. g. Control sequence recommendations and guidelines to eliminate all indoor air quality concerns. h. Service organization credential listing all service technicians their location and experience servicing this specific technology systems. i. Any and all costs associated with using a substituted product shall be the responsibility of the Mechanical contractor. This includes but is not limited to redesign fees, additional piping and ductwork, and controls required GENERAL A. It is the design intent of these specifications to provide a fully integrated HVAC system with all parts working together. These induction units need clean, dehumidified primary air from a dedicated outdoor air unit, hot and chilled water from a boiler and chiller, piping, and controls to coordinate each component to perform as intended. In addition to the items mentioned above that are specified on other sections in division 15, wiring and power requirements in division 16 may also be impacted. Changes, modifications, or substitutions on any component will impact all the other parts of the system and can not be made without a careful review of all related specifications. B. Induction terminal unit shall be constant volume primary air flow units designed to induce a secondary airflow within the conditioned space using the primary conditioned air supply. Units shall be designed for ceiling installation with factory supplied hanging brackets. Hanger rods or other approved hanging system to be field supplied and installed in the field by installing contractor. C. Units shall be equipped with 4 round duct primary air intake, one air plenum and air induction nozzle plate, one chilled/hot water coil, a supply and a return chilled water piping connection, a supply and a return hot water piping connection, one 3/4 condensate drain connection, and one combination supply/return air grille for a full 360 degree coanda effect room air distribution. The grille shall have a removable center core to provide full access to the return air side of the coil. The unit shall be capable of inducing the secondary airflow within the conditioned space using the velocity pressure of the primary airflow. This secondary air must flow directly from the room to the unit and shall not use the ceiling as a return air plenum. Induction units using the ceiling plenum as a return air path are not acceptable. D. Each MiniQ360 unit shall be equipped with one water coil for chilled water and for hot water. Latent conditioning of the air supplied to the space shall be performed at the dedicated outdoor air unit and controlled by exhaust air humidity sensors. Humidity within the building envelope is to be controlled to not exceed 55% relative humidity. E. Each MiniQ360 unit shall consist of one primary air connection, one nozzle plenum with a set of air induction nozzles, one chilled water and hot water coil, water piping connections, a condensate drain

11 connection, and supply/return air grille. For non-drainable applications, a drainable condensate pan with a safety float switch attached to the drain pan shall be provided by the induction unit manufacturer to shut off the chilled water coil if condensate should accumulate. F. The MiniQ360 unit shall be matched up to a supplied 23 3/4 by 23 3/4 supply/return diffuser to evenly distribute the mixed primary air in a 360 degree coanda effect air distribution pattern. The diffuser shall fit into a standard ceiling grid. The center grille center portion of the diffuser for return air shall be removable for access to interior of unit without tools. The primary air connection is a single 4 diameter duct collar which directs the primary air to the nozzles. Water connections are female national pipe thread connections. G. The MiniQ360 unit has one drain pan. This drain pan must be 2 in depth and sloped in the direction of the condensate connection CASINGS A. The entire unit shall be constructed of 20 gauge galvanized sheet metal. The primary air plenum and nozzles shall be designed and configured to provide uniform air distribution with low noise operation to all nozzles. B. The air diffuser shall be removable for access to the interior coil area for cleaning QUALITY ASSURANCE A. All induction terminal units shall be tested by an independent nationally recognized testing laboratory for performance, throws, and sound levels CONTROL SYSTEM A. All controls shall be provided by the Automatic Temperature Control contractor. PART 3 EXECUTION 3.01 INSTALLATION GENERAL A. Follow manufacturer s installation instructions and recommendations for all equipment. B. Install induction terminal units in ceiling in such a manner as to allow easy access to all controls. C. Using the hanging brackets on each unit supplied by the manufacturer, support induction terminal units to supporting structure using field supplied threaded rod or other secure hanging system. D. Provide primary supply air connection and seal with duct sealer after installation. E. Provide water supply/return connection and install temperature control valve. F. Connect the condensate drain to available building drains if required on plans INDUCTION NOZZLES A. Induction nozzles shall be aerodynamically designed and made of LDPE Petrothene food grade plastic having a tapered discharge to minimize noise WATER COIL ASSEMBLY A. Coils shall be of the hot and chilled water type utilizing aluminum fins and copper tubes. Copper tube wall shall be a minimum.033 thickness. Coils shall be factory leak tested at 350 PSI water. Coil connections shall be as indicated on the drawings. B. Coil must be one continuous assembly to minimize leakage. C. The water coil assembly shall consist of a two row copper tube and aluminum fins coil for cooling and one row coil for heating. A drainable condensate pan shall be provided to collect any condensate that might form. D. Control valves for cooling and heating can control one or more induction unit in a given zone. Control valves for the units shall be supplied by the Automatic Temperature Control Contractor.

12 Chilled Beam/Induction Unit All Way Blow Chilled Beam Technical Specifications NuClimate Air Quality Systems, Inc East Molloy Road East Syracuse, New York Telephone (315) Fax (315)

SECTION FAN COIL UNITS

SECTION FAN COIL UNITS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:

More information

1.1 This section applies to air handling units for HVAC Systems.

1.1 This section applies to air handling units for HVAC Systems. AIR HANDLING UNITS GENERAL INFORMATION 1.1 This section applies to air handling units for HVAC Systems. DESIGN REQUIREMENTS 2.1 Design Criteria a. The decision to use modular central station air handling

More information

MHNCCW (4-Pipe) Chilled/Hot Water Ceiling Concealed 208/230V 4-Pipe Heating & Cooling Fan Coil 12,000 BTUH

MHNCCW (4-Pipe) Chilled/Hot Water Ceiling Concealed 208/230V 4-Pipe Heating & Cooling Fan Coil 12,000 BTUH MHNCCW-04-01 (4-Pipe) Chilled/Hot Water Ceiling Concealed 208/230V 4-Pipe Heating & Cooling Fan Coil 12,000 BTUH Rev. 1.2 HVAC Guide Specifications Chilled and Hot Water Fan Coil 4-Pipe Nominal Size: 12,000

More information

MHCCW Chilled Water Ceiling Concealed With 5kW Electric Heat 2-Pipe Heat / Cool Fan Coil 30,000 BTUH

MHCCW Chilled Water Ceiling Concealed With 5kW Electric Heat 2-Pipe Heat / Cool Fan Coil 30,000 BTUH MHCCW-10-05 Chilled Water Ceiling Concealed With 5kW Electric Heat 2-Pipe Heat / Cool Fan Coil 30,000 BTUH Rev. 1.21 HVAC Guide Specifications Chilled Water Fan Coil with Electric Heat 2-Pipe Nominal Size:

More information

MHCCW Chilled Water Ceiling Concealed Without Electric Heat 2-Pipe Heat / Cool Fan Coil 18,000 BTUH

MHCCW Chilled Water Ceiling Concealed Without Electric Heat 2-Pipe Heat / Cool Fan Coil 18,000 BTUH MHCCW-06-00 Chilled Water Ceiling Concealed Without Electric Heat 2-Pipe Heat / Cool Fan Coil 18,000 BTUH Rev. 1.21 HVAC Guide Specifications Chilled or Hot Water Fan Coil 2-Pipe Nominal Size: 18,000 BTUH

More information

MHNCCX DX with Hot Water Heat Ceiling Concealed 4-Pipe Heat / Cool Fan Coil 12,000-36,000 BTUH

MHNCCX DX with Hot Water Heat Ceiling Concealed 4-Pipe Heat / Cool Fan Coil 12,000-36,000 BTUH MHNCCX DX with Hot Water Heat Ceiling Concealed 4-Pipe Heat / Cool Fan Coil 12,000-36,000 BTUH 318 MHNCCX NOMENCLATURE BREAKDOWN 4-Pipe Heat/Cool Ceiling Concealed Fan Coil MHNCCW- XX - XX Ceiling Concealed

More information

Units for suspended ceilings Type DID632

Units for suspended ceilings Type DID632 Type with hinged induced air grille water connections Active chilled beam with two-way air discharge and horizontal heat exchanger in lengths from to 0 feet Active chilled beam for heating and cooling,

More information

A. Air Handling Units shall be designed to the specific requirements of the application: Recirculation or 100% Makeup.

A. Air Handling Units shall be designed to the specific requirements of the application: Recirculation or 100% Makeup. SECTION 23 70 00- CENTRAL HVAC EQUIPMENT PART 1: GENERAL 1.1 PURPOSE: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design.

More information

installation, operation & Maintenance manual Floor-mounted Induction units acb 30/35

installation, operation & Maintenance manual Floor-mounted Induction units acb 30/35 installation, operation & Maintenance manual Floor-mounted Induction units acb 30/35 built on innovation acb 30 & 35 Active Chilled Beam Models ACB30 & ACB35 are designed for installation in the ceiling

More information

Active Chilled Beams

Active Chilled Beams T 2.4/12/US/7 Active Chilled Beams DID61 and DID62 series TROX USA, Inc. 405 Settingdown Circle www.troxusa.com Cumming, GA 0028 e-mail trox@troxusa.com Telephone 770.569.14 Facsimile 770.569.14 Contents

More information

SECTION AIR COILS

SECTION AIR COILS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:

More information

ACBH/ACBV ACTIVE CHILLED BEAM INSTALLATION MANUAL. Date: 05/12 Reference # : L-50.

ACBH/ACBV ACTIVE CHILLED BEAM INSTALLATION MANUAL. Date: 05/12 Reference # : L-50. ACBH/ACBV ACTIVE CHILLED BEAM INSTALLATION MANUAL Date: 05/12 Reference # : L-50 Installation Instructions These installation instructions apply to the Price active chilled beams models ACBH and ACBV Identification

More information

Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION AIR HANDLING UNITS

Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION AIR HANDLING UNITS SECTION 23 70 00 AIR HANDLING UNITS PART 1. GENERAL 1.1 Section includes air-handling units to 15,000 cfm and accessories. 1.2 Related Sections 1 : A. Division 01 - Brown University Standard for Narragansett

More information

MH1WC4W-06-1-B Chilled/Hot Water 1-Way Cassette Fan Coil

MH1WC4W-06-1-B Chilled/Hot Water 1-Way Cassette Fan Coil MH1WC4W-06-1-B Chilled/Hot Water 1-Way Cassette Fan Coil 4-Pipe Heat / Cool Fan Coil 18,000 BTUH Rev. 1.11 HVAC Guide Specifications Chilled and Hot Water Cassette Fan Coil 4-Pipe Nominal Size: 18,000

More information

UNIVERSITY OF MISSOURI Central Station Air-Handling Units March

UNIVERSITY OF MISSOURI Central Station Air-Handling Units March GENERAL: 1. This section provides criteria for the design and installation of air handling units. DESIGN GUIDELINES: Design General 1. Location 1.1. For new construction, and existing buildings where possible,

More information

SPLIT-SYSTEM EVAPORATOR BLOWERS K2EU060, K4EU090, K3EU120 & K1EU180 5 Thru 15 Nominal Tons DESCRIPTION ACCESSORIES FIELD INSTALLED

SPLIT-SYSTEM EVAPORATOR BLOWERS K2EU060, K4EU090, K3EU120 & K1EU180 5 Thru 15 Nominal Tons DESCRIPTION ACCESSORIES FIELD INSTALLED (491) SPLIT-SYSTEM EVAPORATOR BLOWERS K2EU060, K4EU, K3EU & K1EU180 5 Thru 15 Nominal Tons DESCRIPTION These completely assembled units include a well-insulated cabinet, a DX cooling coil with copper tubes

More information

Rittling Induction Units Catalog

Rittling Induction Units Catalog Rittling Induction Units Catalog Heating Cooling Fresh Air Clean Air Zehnder everything you need to create a comfortable, healthy and energy-efficient indoor climate Heating, cooling, fresh and clean air:

More information

installation, operation & Maintenance manual acb ceiling-mounted cassette models

installation, operation & Maintenance manual acb ceiling-mounted cassette models installation, operation & Maintenance manual acb ceiling-mounted cassette models built on innovation Active chilled beams Active Chilled Beam cassette style beams are induction driven, heating and cooling

More information

KLIMA Active Chilled Beams

KLIMA Active Chilled Beams KLIMA 2 600 Active Chilled Beams Index Subject Page Index 1 Introduction 2 General description 3-4 Product features 5-6 Dimensions 7 Performance data 8-11 Section example Guide specifications 13 1 Introduction

More information

Chilled Water DOAS Fan Powered Terminal Units

Chilled Water DOAS Fan Powered Terminal Units Chilled Water DOAS Fan Powered Terminal Units CHILLED WATER DOAS FAN POWERED TERMINAL UNITS DOAS TERMINAL UNITS FEATURES AND BENEFITS MINIMUM VENTILATION CONTROL The DOAS unit provides the Designer, Owner

More information

SAFETY AND INSTALLATION MANUAL MODEL 8100

SAFETY AND INSTALLATION MANUAL MODEL 8100 SAFETY AND INSTALLATION MANUAL ENERGY RECOVERY VENTILATORS MODEL 8100 Provides year-round fresh air Recovers 77% of the apparent heating or cooling energy from the exhausted air See Warnings Page 3 Table

More information

CWA4 Chilled & Hot Water Fan Coil

CWA4 Chilled & Hot Water Fan Coil CWA4 Chilled & Hot Water Fan Coil 4-Pipe Heat & Cool Fan Coil 24,000-60,000 BTUH 259 CWA4 NOMENCLATURE BREAKDOWN 4-Pipe Heat & Cool Multiposition Fan Coil Nominal BTUH 24=24,000 36=36,000 48=48,000 60=60,000

More information

Advance Product Data. Features/Benefits. 42WKN Hydronic Fan Coil Units

Advance Product Data. Features/Benefits. 42WKN Hydronic Fan Coil Units Advance Product Data 42WKN Hydronic Fan Coil Units 3 4 to 2 1 2 Tons UNIT SIZES 004-010 UNIT SIZES 016,020 The new Carrier Hydronic Cassette offers a modern solution for a wide variety of small and medium

More information

CFFWA4P-16-1-U Chilled/Hot Water Universal Mount Fan Coil (4-Pipe) 4-Pipe Heat / Cool Fan Coil 48,000 BTUH

CFFWA4P-16-1-U Chilled/Hot Water Universal Mount Fan Coil (4-Pipe) 4-Pipe Heat / Cool Fan Coil 48,000 BTUH CFFWA4P-16-1-U Chilled/Hot Water Universal Mount Fan Coil (4-Pipe) 4-Pipe Heat / Cool Fan Coil 48,000 BTUH Rev. 1.3 HVAC Guide Specifications Chilled and Hot Water Universal Mount Fan Coil 4-Pipe Nominal

More information

CFFWA4P-12-1-U Chilled/Hot Water Universal Mount Fan Coil (4-Pipe) 4-Pipe Heat / Cool Fan Coil 36,000 BTUH

CFFWA4P-12-1-U Chilled/Hot Water Universal Mount Fan Coil (4-Pipe) 4-Pipe Heat / Cool Fan Coil 36,000 BTUH CFFWA4P-12-1-U Chilled/Hot Water Universal Mount Fan Coil (4-Pipe) 4-Pipe Heat / Cool Fan Coil 36,000 BTUH Rev. 1.3 HVAC Guide Specifications Chilled and Hot Water Universal Mount Fan Coil 4-Pipe Nominal

More information

CFFWA4P-08-1-U Chilled/Hot Water Universal Mount Fan Coil (4-Pipe) 4-Pipe Heat / Cool Fan Coil 24,000 BTUH

CFFWA4P-08-1-U Chilled/Hot Water Universal Mount Fan Coil (4-Pipe) 4-Pipe Heat / Cool Fan Coil 24,000 BTUH CFFWA4P-08-1-U Chilled/Hot Water Universal Mount Fan Coil (4-Pipe) 4-Pipe Heat / Cool Fan Coil 24,000 BTUH Rev. 1.3 HVAC Guide Specifications Chilled and Hot Water Universal Mount Fan Coil 4-Pipe Nominal

More information

EHH SERIES DRAW THROUGH FAN COILS CFM

EHH SERIES DRAW THROUGH FAN COILS CFM EHH SERIES DRAW THROUGH FAN COILS 400-5000 CFM TABLE OF CONTENTS TABLE OF CONTENTS 2 INTRODUCTION 3 GUIDE SPECIFICATIONS 4 UNIT OVERVIEW 6 TECHNICAL DATA 8 DIMENSIONS 10 COMPUTER SELECTION 11 GEMCOOL PROFILE

More information

Product Specifications. Vertical Floor Consoles By First Co.

Product Specifications. Vertical Floor Consoles By First Co. NOW WITH 18 GAUGE CABINET AND FACTORY INSTALLED SERVICE SWITCH Product Specifications VFB Series VSB Series VCB Series Vertical Console Fan Coils 300-00 CFM Vertical Floor Consoles By First Co. VFB Series

More information

installation, operation & Maintenance manual Floor-mounted Induction units

installation, operation & Maintenance manual Floor-mounted Induction units installation, operation & Maintenance manual Floor-mounted Induction units built on innovation induction units- fmfby/ fmlby/ fmtby Floor-mounted induction units FMFBY, FMLBY, & FMTBY are designed for

More information

MHCFC4W Chilled/Hot Water Cassette Fan Coil

MHCFC4W Chilled/Hot Water Cassette Fan Coil MHCFC4W-16-01 Chilled/Hot Water Cassette Fan Coil 4-Pipe Heat / Cool Fan Coil 48,000 BTUH Rev. 1.1 HVAC Guide Specifications Chilled and Hot Water Cassette Fan Coil 4-Pipe Nominal Size: 48,000 BTUH Multiaqua

More information

MHCFC4W Chilled/Hot Water Cassette Fan Coil

MHCFC4W Chilled/Hot Water Cassette Fan Coil MHCFC4W-04-01 Chilled/Hot Water Cassette Fan Coil 4-Pipe Heat / Cool Fan Coil 12,000 BTUH Rev. 1.2 HVAC Guide Specifications Chilled and Hot Water Cassette Fan Coil 4-Pipe Nominal Size: 12,000 BTUH Multiaqua

More information

MHCFC4W Chilled/Hot Water Cassette Fan Coil

MHCFC4W Chilled/Hot Water Cassette Fan Coil MHCFC4W-08-01 Chilled/Hot Water Cassette Fan Coil 4-Pipe Heat / Cool Fan Coil 24,000 BTUH Rev. 1.1 HVAC Guide Specifications Chilled and Hot Water Cassette Fan Coil 4-Pipe Nominal Size: 24,000 BTUH Multiaqua

More information

Linear Floor Heaters

Linear Floor Heaters Linear Floor Heaters The Price Linear Floor Heater family provides ultimate flexibility in terms of style, performance, and ease of installation. Using room-side heat virtually eliminates the requirement

More information

DIVISION 15 MECHANICAL

DIVISION 15 MECHANICAL DIVISION 15 MECHANICAL A. GENERAL DESIGN CONDITIONS 1. Design occupied spaces to maintain 72 F and a space dew point temperature not to exceed 55 F. 2. Design classroom and office space buildings with

More information

SECTION CONVECTION HEATING AND COOLING UNITS

SECTION CONVECTION HEATING AND COOLING UNITS PART 1 GENERAL 1.01 SECTION INCLUDES A. Baseboard radiation. B. Finned tube radiation. C. Convectors. D. Unit heaters. E. Cabinet unit heaters. F. Fan-coil units. G. Unit ventilators. H. Blower-coil units.

More information

CWA2 Chilled Water Fan Coil With or Without Electric Heat 2-Pipe Heat / Cool Fan Coil 18,000-60,000 BTUH

CWA2 Chilled Water Fan Coil With or Without Electric Heat 2-Pipe Heat / Cool Fan Coil 18,000-60,000 BTUH CWA2 Chilled Water Fan Coil With or Without Electric Heat 2-Pipe Heat / Cool Fan Coil 18,000-60,000 BTUH 233 CWA2 NOMENCLATURE BREAKDOWN 2-Pipe Heat/Cool with Electric Heat Multiposition Fan Coil Nominal

More information

Fan Coil Unit 1. BOSCH Climate Fan Coil Unit

Fan Coil Unit 1. BOSCH Climate Fan Coil Unit Fan Coil Unit 1 BOSCH Climate 000 Fan Coil Unit 2 Fan Coil Unit Introduction to Bosch Thermotechnology Bosch Thermotechnik GmbH is a leading supplier of resourceefficient heating products and hot water

More information

Performance Rating of Active Chilled Beams

Performance Rating of Active Chilled Beams AHRI Standard 1241 (SI) 2016 Standard for Performance Rating of Active Chilled Beams IMPORTANT SAFETY RECOMMENDATIONS AHRI does not set safety standards and does not certify or guarantee the safety of

More information

SECTION DUCTWORK

SECTION DUCTWORK PART 1 GENERAL 1.1 REFERENCES SECTION 23 31 00 DUCTWORK A. ASHRAE - Handbook, Duct Design B. ASHRAE - Handbook, Duct Construction C. ASTM A90/A90M - Standard Test Method for Weight (Mass) of Coating on

More information

SECTION AIR COILS

SECTION AIR COILS PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 82 16 AIR COILS SPEC WRITER NOTE: Delete between //---// if not applicable to project. Also delete any other item or paragraph not applicable in the section

More information

SeasonMaker ThinLine Fan-coil Units

SeasonMaker ThinLine Fan-coil Units Catalog C: 720-12 SeasonMaker ThinLine Fan-coil Units Type TSH & TSC Horizontal Design TSS, TPF, TSF & TSB Vertical Design C L I S T E D Ratings Certified by the Air Conditioning & Refrigeration Institute

More information

EMBASSY SERIES SINGLE PACKAGE AIR CONDITIONERS (WATER-COOLED) C2ED060, 090, 120 & 180 5, 7-1/2, 10 & 15 Nominal Tons

EMBASSY SERIES SINGLE PACKAGE AIR CONDITIONERS (WATER-COOLED) C2ED060, 090, 120 & 180 5, 7-1/2, 10 & 15 Nominal Tons 560.20-TG1Y (388) EMBASSY SERIES SINGLE PACKAGE AIR CONDITIONERS (WATER-COOLED) C2ED060, 090, 120 & 180 5, 7-1/2, 10 & 15 Nominal Tons Each circuit includes a fully hermetic compressor with a crankcase

More information

K*ES120 DESCRIPTION TECHNICAL GUIDE SPLIT-SYSTEM EVAPORATOR BLOWERS 10 NOMINAL TONS EER 8.5 ACCESSORIES FIELD INSTALLED TABLE 1: ARI RATINGS*

K*ES120 DESCRIPTION TECHNICAL GUIDE SPLIT-SYSTEM EVAPORATOR BLOWERS 10 NOMINAL TONS EER 8.5 ACCESSORIES FIELD INSTALLED TABLE 1: ARI RATINGS* TECHNICAL GUIDE SPLIT-SYSTEM EVAPORATOR BLOWERS K*ES120 10 NOMINAL TONS EER 8.5 DESCRIPTION These completely assembled dual circuit evaporator blower units include a well-insulated cabinet, a DX cooling

More information

VERTICAL STACK INNKEEPER GUIDE SPECIFICATION CGC Hybrid Heat Pump System

VERTICAL STACK INNKEEPER GUIDE SPECIFICATION CGC Hybrid Heat Pump System VERTICAL STACK INNKEEPER GUIDE SPECIFICATION CGC Hybrid Heat Pump System PART 1 SYSTEM DESCRIPTION 1.1 The HVAC system is based on the CGC HYBRID Hydronic Heat Pump System. 1.2 The system will automatically

More information

HAP e-help. Modeling Induction Beams in HAP v4.8 QB TIP 001

HAP e-help. Modeling Induction Beams in HAP v4.8 QB TIP 001 This HAP e-help provides a high-level overview of induction beams, how they work and how to model them in HAP 4.8 (and later versions). The first half of the article explains how induction beams work.

More information

A. Section includes split-system air-conditioning units consisting of separate evaporator-fan and compressor-condenser components.

A. Section includes split-system air-conditioning units consisting of separate evaporator-fan and compressor-condenser components. Page 238126-1 SECTION 238126 - This Section includes requirements for the LEED Rating System. However, equipment specified in this Section may not qualify for LEED Rating System prerequisites and credits.

More information

Copyright 2003 and 2005 by The American Institute of Architects (AIA) Modified by MSU Physical Plant / Engineering and Architectural Services

Copyright 2003 and 2005 by The American Institute of Architects (AIA) Modified by MSU Physical Plant / Engineering and Architectural Services Page 238216-1 Copyright 2003 and 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical

More information

DADANCO E U R O P E. Induction unit. Installation, operation & maintenance manual. Induction Units

DADANCO E U R O P E. Induction unit. Installation, operation & maintenance manual. Induction Units DADANCO Induction unit Installation, operation & maintenance manual Induction Units DADANCO INDUCTION UNIT FLOOR-MOUNTED MODELS INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS DESCRIPTION FMLBY floor

More information

KIC Air Curtains. Technical Guide

KIC Air Curtains. Technical Guide TGKIC-3 KIC Air Curtains Technical Guide AIR PERFORMANCE AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC. King certifies that the air curtains shown herein are licensed to bear the AMCA seal. The

More information

Installation, Operating & Maintenance Instructions. Air Handler Models: AH & AV

Installation, Operating & Maintenance Instructions. Air Handler Models: AH & AV Installation, Operating & Maintenance Instructions Air Handler Models: AH & AV Table of Contents Table of Contents... 2 Product Safety... 2 Important Information About Safety Instructions... 2 Receiving...

More information

SPLIT-SYSTEM EVAPORATOR BLOWER DESCRIPTION ACCESSORIES - FIELD INSTALLED. K5EU090 and K4EU Hz 7.5 and 10 NOMINAL TONS SUNLINE 2000 (WORLD 50 HZ)

SPLIT-SYSTEM EVAPORATOR BLOWER DESCRIPTION ACCESSORIES - FIELD INSTALLED. K5EU090 and K4EU Hz 7.5 and 10 NOMINAL TONS SUNLINE 2000 (WORLD 50 HZ) (994) SPLIT-SYSTEM EVAPORATOR BLOWER K5EU090 and K4EU120 50 Hz 7.5 and 10 NOMINAL TONS SUNLINE 2000 (WORLD 50 HZ) DESCRIPTION These completely assembled units include a well-insulated cabinet, a DX coil

More information

SINGLE DUCT TERMINAL UNITS

SINGLE DUCT TERMINAL UNITS Performance Data AHRI Certification and Performance Notes Model Series 3000 asic Unit AHRI Certification Rating Points VAV: Fiberglass Inlet Size Airflow cfm l/s Min. Inlet Ps w.g. Pa Discharge Sound Power

More information

Hood Depot Internatioonal, Inc., Phone S. Powerline Road, Deerfield Beach, FL

Hood Depot Internatioonal, Inc., Phone S. Powerline Road, Deerfield Beach, FL The Kitchen Cool by Hood Depot is a conditioned make up air unit design with flexibility, form and function kept in mind. Our unit offers a variety of configurations that allow the customer to customize

More information

SeasonMaker ThinLine Fan-coil Units

SeasonMaker ThinLine Fan-coil Units Catalog C: 720-12 SeasonMaker ThinLine Fan-coil Units Type TSH & TSC Horizontal Design TSS, TPF, TSF & TSB Vertical Design C L I S T E D Ratings Certified by the Air Conditioning & Refrigeration Institute

More information

SECTION DUCTWORK

SECTION DUCTWORK SECTION 15890 DUCTWORK PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 07270 - Firestopping and Fire and Smoke Barrier Caulking. 2. 15260 - Vibration Isolation. 3. 15280 - Thermal Insulation (HVAC).

More information

SECTION AIR HANDLING UNIT

SECTION AIR HANDLING UNIT SECTION 15800 - AIR HANDLING UNIT PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS, and Section 15030, ELECTRICAL REQUIREMENTS FOR

More information

Large Capacity Fan Coil Units Catalog Belt-Drive and Direct-Drive Cabinet and Hideaway Models

Large Capacity Fan Coil Units Catalog Belt-Drive and Direct-Drive Cabinet and Hideaway Models Large Capacity Fan Coil Units Catalog 735-12 Belt-Drive and Direct-Drive Cabinet and Hideaway Models Table of Contents Agency Listing and Nomenclature... 3 Overview....................................

More information

Modular Active. Chilled. Beams

Modular Active. Chilled. Beams Modular Active Chilled Beams How Twa MAC Beams Work Primary air (100% outside air) is dehumidified to between 50-57 F dew point and is used to: control the latent requirements of the space, provide fresh

More information

Technical Assignment 3 11/15/04. Executive Summary

Technical Assignment 3 11/15/04. Executive Summary Executive Summary This report is an analysis of the existing systems within the Outreach Innovation Building in University Park, PA. One significant design criteria was a lower than average noise criteria

More information

Installation, Operating & Maintenance Instructions. Horizontal Models: LH & HL

Installation, Operating & Maintenance Instructions. Horizontal Models: LH & HL Installation, Operating & Maintenance Instructions Horizontal Models: LH & HL Table of Contents Table of Contents... 2 Product Safety... 2 Important Information About Safety Instructions... 2 Receiving...

More information

City of Duluth Festival Center 04/25

City of Duluth Festival Center 04/25 SECTION 230593 - TESTING, ADJUSTING, AND BALANCING FOR HVAC PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and

More information

A. American National Standards Institute (ANSI) : Establishes requirements applicable to certifying direct gas-fired heaters.

A. American National Standards Institute (ANSI) : Establishes requirements applicable to certifying direct gas-fired heaters. Section 15 _ Energy Recovery Air Handling System Part 1: GENERAL 1.1 Section Includes: A. Energy Recovery Air Handler B. Controls (most by Others) C. Equipment Schedule 1.2 Related Sections: A. Section

More information

INSTALLATION & OPERATING INSTRUCTIONS AEM SERIES VARIABLE SPEED MULTI-POSITION ELECTRIC HEAT AIR HANDLER

INSTALLATION & OPERATING INSTRUCTIONS AEM SERIES VARIABLE SPEED MULTI-POSITION ELECTRIC HEAT AIR HANDLER INSTALLATION & OPERATING INSTRUCTIONS AEM SERIES VARIABLE SPEED MULTI-POSITION ELECTRIC HEAT AIR HANDLER MODEL (INCLUDING HEATER MODEL #) SERIAL # INSTALLER INSTALLATION DATE These instructions should

More information

SECTION AIR HANDLING UNITS WITH COILS. 1. Central Station Air Handling Units. 1. Section Basic Mechanical Requirements.

SECTION AIR HANDLING UNITS WITH COILS. 1. Central Station Air Handling Units. 1. Section Basic Mechanical Requirements. SECTION 15855 AIR HANDLING UNITS WITH COILS PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: 1. Central Station Air Handling Units. B. Related Sections: 1.02 REFERENCES 1. Section 15010 - Basic Mechanical

More information

INSTALLATION INSTRUCTIONS FMB/FMC SERIES MULTI-POSITION AIR HANDLER

INSTALLATION INSTRUCTIONS FMB/FMC SERIES MULTI-POSITION AIR HANDLER ASPEN MANUFACTURING 373 ATASCOCITA RD. HUMBLE, TX 77396 TEL (281) 441-6500 FAX (281) 441-6510 > INSTALLATION INSTRUCTIONS FMB/FMC SERIES MULTI-POSITION AIR HANDLER IMPORTANT: "The

More information

SECTION (15820) - AIR DUCT ACCESSORIES

SECTION (15820) - AIR DUCT ACCESSORIES PART 1 GENERAL 1.01 SUMMARY A. Section includes: SECTION 23 33 00 (15820) - AIR DUCT ACCESSORIES 1. Manual-Volume Dampers 2. Fire Dampers 3. Turning Vanes 4. Duct-Mounted Access Doors 5. Flexible Connectors

More information

SECTION DUCTWORK. A. Section Painting: Weld priming, weather resistant, paint or coating.

SECTION DUCTWORK. A. Section Painting: Weld priming, weather resistant, paint or coating. SECTION 15890 DUCTWORK PART 1 - GENERAL 1.1 SECTION INCLUDES A. Metal ductwork. B. Duct cleaning. 1.2 RELATED SECTIONS A. Section 09900 - Painting: Weld priming, weather resistant, paint or coating. B.

More information

CUMULUS CUMULUS. Key figures. Construction. Function Integrated chilled beams

CUMULUS CUMULUS. Key figures. Construction. Function Integrated chilled beams Integrated chilled beams Key figures Connections: 1x mm, 2x mm Airflow: 5-60 l/s Pressure range: 40 - Pa Size: 293 x 200 mm (WxH) Length: 1192 or 1792 mm Total effect: up to 1200W Cumulus is available

More information

Swegon PACIFIC. Integrated chilled beam PACIFIC CHILLED BEAM KEY FIGURES

Swegon PACIFIC. Integrated chilled beam PACIFIC CHILLED BEAM KEY FIGURES Swegon PACIFIC Integrated chilled beam PACIFIC CHILLED BEAM The PACIFIC is a high performance chilled beam for installation in false ceilings. Built-in flexibility, designed to meet the needs of today

More information

LOW STATIC HYDRONIC DUCTED UNIT

LOW STATIC HYDRONIC DUCTED UNIT LOW STATIC HYDRONIC DUCTED UNIT PDWA-~AC SERIES PDWA(4R)-~-V-MEDC PDWA(4R)-~-V-MEEU PDWA(R)-~-V PDWA(R+1)-~-P Model cooling capacity( KW) at Medium Speed cooling capacity (KW) at Medium Speed cooling capacity

More information

Product Data. Features/Benefits. WEATHERMASTER 36R,T Bypass Control Induction Air Terminals to cfm (1880 to 7100 Btuh)

Product Data. Features/Benefits. WEATHERMASTER 36R,T Bypass Control Induction Air Terminals to cfm (1880 to 7100 Btuh) Product Data WEATHERMASTER 36R,T Bypass Control Induction Air Terminals 19.4 to 131.9 cfm (1880 to 7100 Btuh) 36RH a36-516 a36-515 36RV Induction bypass air terminals offer: Low installation costs Low

More information

Technical Guide SUNLINE 2000 DESCRIPTION ACCESSORIES FIELD INSTALLED SPLIT-SYSTEM EVAPORATOR BLOWER K4EU NOMINAL TONS (WORLD 50 HZ)

Technical Guide SUNLINE 2000 DESCRIPTION ACCESSORIES FIELD INSTALLED SPLIT-SYSTEM EVAPORATOR BLOWER K4EU NOMINAL TONS (WORLD 50 HZ) Technical Guide SUNLINE 2000 SPLIT-SYSTEM EVAPORATOR BLOWER K4EU180 15 NOMINAL TONS (WORLD 50 HZ) DESCRIPTION These completely assembled units include a well-insulated cabinet, a DX cooling coil with copper

More information

KINGS COUNTY JAIL EXPANSION PHASE III COUNTY OF KINGS SECTION

KINGS COUNTY JAIL EXPANSION PHASE III COUNTY OF KINGS SECTION SECTION 237433, PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to

More information

INSTALLATION INSTRUCTIONS FMB/FMC SERIES MULTI-POSITION AIR HANDLER

INSTALLATION INSTRUCTIONS FMB/FMC SERIES MULTI-POSITION AIR HANDLER INSTALLATION INSTRUCTIONS FMB/FMC SERIES MULTI-POSITION AIR HANDLER IMPORTANT MASSAGE TO INSTALLER: "The United States Environmental Protection Agency ("EPA") has issued various regulations regarding the

More information

FCI500/600/FVI500/FCL/FVL600/FCQ-700 Installation and Maintenance Manual

FCI500/600/FVI500/FCL/FVL600/FCQ-700 Installation and Maintenance Manual FCI500/600/FVI500/FCL/FVL600/FCQ-700 Installation and Maintenance Manual FAN POWERED TERMINALS Receiving Inspection Prior to removing the shipping material, visually inspect the packing materials. There

More information

Submittal Data Performance Data Electrical Data

Submittal Data Performance Data Electrical Data ERMS Series Submittal Data Submittal Data Unit Designation: Job name: Architect: Engineer: Contractor: Performance Data Revision: 07/01/11 Cooling Capacity: EER: Heating Capacity: COP: Ambient Air Temp:

More information

SECTION SPECIFICATION FOR HI-VELOCITY FAN COIL SYSTEMS

SECTION SPECIFICATION FOR HI-VELOCITY FAN COIL SYSTEMS 1.0 GENERAL SECTION 15740 SPECIFICATION FOR HI-VELOCITY FAN COIL SYSTEMS 1.01 DESCRIPTION Item A. Scope This section specifies four sizes of fan coil units designed for hydronic heating and air conditioning.

More information

SECTION AIR DUCT ACCESSORIES

SECTION AIR DUCT ACCESSORIES SECTION 23 33 00 AIR DUCT ACCESSORIES PART 1 - GENERAL 1.1 SUMMARY A. Section includes back-draft dampers, combination fire-and-smoke dampers, duct access doors, fire dampers, smoke dampers, volume control

More information

SECTION PACKAGED ROOFTOP AIR CONDITIONING UNITS

SECTION PACKAGED ROOFTOP AIR CONDITIONING UNITS SECTION 15732 - PACKAGED ROOFTOP AIR CONDITIONING UNITS PART 1 - GENERAL 1.1 SECTION INCLUDES A. Package roof top unit. B. Heat exchanger. C. Refrigeration components. D. Unit operating controls. E. Roof

More information

Inffusers. idl20 (2 WAY) ids60 (4 WAY)

Inffusers. idl20 (2 WAY) ids60 (4 WAY) Inffusers idl20 (2 WAY) ids60 (4 WAY) built on innovation what is an inffuser? DADANCO s INFFUSERS are quite simply an induction diffuser that uses special nozzles located in the underside of the air plenum

More information

AIR DISTRIBUTION. C. Section Building Automation and Control System Guidelines. D. Section Fire Alarm System & Detection Systems

AIR DISTRIBUTION. C. Section Building Automation and Control System Guidelines. D. Section Fire Alarm System & Detection Systems 233100 AIR DISTRIBUTION PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230700 HVAC Insulation B. Section 237300 Air Handling C. Section 230900 Building Automation and Control System Guidelines D. Section

More information

Cabinet Unit Heaters Steam / Hot Water

Cabinet Unit Heaters Steam / Hot Water 11-160.4 February, 2005 Cabinet Unit Heaters Steam / Hot Water Model C MODEL IDENTIFICATION Table of Contents I. Model Identification... 3 Page Il. IIl. III. IV. Design Benefits A. Features and Benefits...

More information

iq Star LYRA II chilled beam cassette

iq Star LYRA II chilled beam cassette iq Star LYRA II chilled beam cassette Key features Ventilation Heating and cooling Compact chilled beam Adjustable induction Flow Pattern Control Integrated control In option: Demand Controlled Ventilation,

More information

SECTION SPLIT-SYSTEM AIR-CONDITIONERS

SECTION SPLIT-SYSTEM AIR-CONDITIONERS SECTION 23 81 26 SPLIT-SYSTEM AIR-CONDITIONERS PART 1 - GENERAL 1.1 SUMMARY A. Section includes split-system air-conditioning units consisting of separate evaporator-fan and compressor-condenser components.

More information

UNIVERSITY OF ROCHESTER DESIGN STANDARDS NOVEMBER 1, 2013

UNIVERSITY OF ROCHESTER DESIGN STANDARDS NOVEMBER 1, 2013 SECTION 15800 - AIR HANDLING EQUIPMENT 1.1 GENERAL A. All air handlers installed shall conform to the University of Rochester specification Guideline for Semi-Custom and Pre-Engineered Air Handling Units.

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 230593 - TESTING, ADJUSTING, AND BALANCING FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Balancing Air Systems: a. Constant-volume air systems. b. Variable-air-volume systems. 2.

More information

TECHNICAL GUIDE SPLIT-SYSTEM AIR-COOLED EVAPORATOR BLOWER 25, 30, 40 & 50 TON LA300, LB360, 480 & 600 (50 Hz) PROVEN PERFORMANCE GENERAL FEATURING

TECHNICAL GUIDE SPLIT-SYSTEM AIR-COOLED EVAPORATOR BLOWER 25, 30, 40 & 50 TON LA300, LB360, 480 & 600 (50 Hz) PROVEN PERFORMANCE GENERAL FEATURING TECHNICAL GUIDE SPLIT-SYSTEM AIR-COOLED EVAPORATOR BLOWER 25, 30, 40 & 50 TON LA300, LB360, 480 & 600 (50 Hz) PROVEN PERFORMANCE GENERAL The LA/LB line is a flexible performer. LA300, LB360 & 480 can be

More information

FCC Fan-Coil Units High-Performance, Vertical

FCC Fan-Coil Units High-Performance, Vertical FCC Fan-Coil s High-Performance, Vertical Model FCC construction features Piping and supply-duct connections are from top of unit, eliminating the need for side or back access Right or left-hand configurations

More information

Large Capacity Fan Coil Units Belt and Direct Drive Cabinet and Hideaway

Large Capacity Fan Coil Units Belt and Direct Drive Cabinet and Hideaway Catalog C: 735-7 Large Capacity Fan Coil Units Belt and Direct Drive Cabinet and Hideaway Direct Drive CUL Listed McQuay Large Capacity Fan Coil Units Page 2 / Catalog 735 Direct drive hideaway unit The

More information

SPLIT-SYSTEM EVAPORATOR BLOWER DESCRIPTION FEATURES L4EU NOMINAL TONS

SPLIT-SYSTEM EVAPORATOR BLOWER DESCRIPTION FEATURES L4EU NOMINAL TONS 036-21096-001 (0101) SPLIT-SYSTEM EVAPORATOR BLOWER L4EU240 20 NOMINAL TONS DESCRIPTION This 20 ton evaporator blower is designed with two distinct modules to provide maximum application flexibility. The

More information

ASHRAE JOURNAL ON REHEAT

ASHRAE JOURNAL ON REHEAT Page: 1 of 7 ASHRAE JOURNAL ON REHEAT Dan Int-Hout Chief Engineer Page: 2 of 7 Overhead Heating: A lost art. March 2007 ASHRAE Journal Article Dan Int-Hout Chief Engineer, Krueger VAV terminals provide

More information

AIR HANDLING. B. Section Building Automation and Control System Guidelines. C. Section Air Cleaning Devices and Filters

AIR HANDLING. B. Section Building Automation and Control System Guidelines. C. Section Air Cleaning Devices and Filters 237300 AIR HANDLING PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230530 Clean Steam Generation B. Section 230900 Building Automation and Control System Guidelines C. Section 234100 Air Cleaning Devices

More information

Installation & Maintenance Data IM Contents

Installation & Maintenance Data IM Contents Installation & Maintenance Data IM 254-4 Group: Fan Coil Part Number: 107133000 Date: June 1999 SeasonMaker HiLine Fan-coil Units Type KZZ Contents Inspection..................................... 2 Riser

More information

Product Data. Features/Benefits. 36CBAC,AE,AF,AH,AQ,AN, PB,PD,PS Series Active and Passive Chilled Beams. 11 to 190 cfm

Product Data. Features/Benefits. 36CBAC,AE,AF,AH,AQ,AN, PB,PD,PS Series Active and Passive Chilled Beams. 11 to 190 cfm Product Data 36CBAC,AE,AF,AH,AQ,AN, PB,PD,PS Series Active and Passive Chilled Beams 11 to 190 cfm 36CBAC A36-449.eps Chilled beam units offer: An increase in total airflow Sensible cooling and heating

More information

SpaceKeeper Console (SKC)

SpaceKeeper Console (SKC) SpaceKeeper Console (SKC) With finished cabinet or custom enclosure SKC 008-015 ¾ - 1¼ tons 12 W x 25¼ H x 48 L CGC-09 SpaceKeeper Console R410A MODEL NO. SKC _ 008 010 012 015 Net Cooling Capacity - Rated

More information

Rosemex Products 96 VENTILATION CLIMATAIR COMPARTMENT AIR HANDLING UNITS

Rosemex Products 96 VENTILATION CLIMATAIR COMPARTMENT AIR HANDLING UNITS 10 Rosemex Products 96 VENTILATION CLIMATAIR COMPARTMENT AIR HANDLING UNITS 2 INDEX Page Description - Introduction -Application - Data... 2 Typical Installation... 3 Sound performance... 3-6 Dimensional

More information

Guide Spec Summary. Option List. Date: 05/21/2001. EarthWise VAV Terminal Units Full Spec. Prepared by: Phone Number: Prepared for:

Guide Spec Summary. Option List. Date: 05/21/2001. EarthWise VAV Terminal Units Full Spec. Prepared by: Phone Number: Prepared for: Date: 05/21/2001 Time: 02:57:44 PM Job Name: EarthWise VAV Terminal Units Full Spec Location: AnyTown, Earth Prepared by: Phone Number: Prepared for: Guide Spec Summary Option List SINGLE & DUAL DUCT UNIT

More information

Double Skin Casing Air Handling Units

Double Skin Casing Air Handling Units Double Skin Casing Air Handling Units Double wall with 25 mm insulation Modular design for clean process application flexibility all the requirements 2,000 40,000 CFM AUTUMN Air Handling Units incorporate

More information

1.03 RELATED SECTIONS: The following sections contain requirements that relate to this section.

1.03 RELATED SECTIONS: The following sections contain requirements that relate to this section. SECTION 15855 GAS FURNACE/DX COOLING UNIT PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of contract including General and Supplementary Conditions of Division 1 of Specification

More information

SECTION TESTING, ADJUSTING, AND BALANCING FOR HVAC INTRODUCTORY INFORMATION

SECTION TESTING, ADJUSTING, AND BALANCING FOR HVAC INTRODUCTORY INFORMATION SECTION 15990 TESTING, ADJUSTING, AND BALANCING FOR HVAC INTRODUCTORY INFORMATION The purpose of this guide specification is to assist the Specifier in correctly specifying Mechanical System Testing Adjusting

More information