PRO 2000i LOW LEVEL DEPOSITOR

Size: px
Start display at page:

Download "PRO 2000i LOW LEVEL DEPOSITOR"

Transcription

1 DEPOSITORS AND AUTOMATED CAKE PRODUCTION SYSTEMS PRO 2000i LOW LEVEL DEPOSITOR OPERATION AND SPARE PARTS MANUAL Serial No. PR2L- (Please quote this number when ordering spares, and making service calls) Jan 2013 Unifiller Systems Inc Macdonald Road, Delta, B.C. Canada, V4G 1N3 l Tel: l Fax:

2 TABLE OF CONTENTS TABLE OF CONTENTS... 2 SAFETY INSTRUCTIONS... 3 WARNING DECALS... 4 NORTH AMERICA... 4 OUTSIDE NORTH AMERICA... 4 CONTACTING UNIFILLER... 5 INTRODUCTION... 6 OPERATING PROCEDURES... 7 AIR REQUIREMENTS... 7 HOPPER SET UP... 8 FOOT SWITCH OR HAND HELD NOZZLE PLACEMENT... 9 PRIMING/PREPARING TO DEPOSIT PURGE BUTTON DEPOSIT SPEED CONTROL VOLUME ADJUSTMENT WORKING WITH THE DEPOSITOR CHANGING TO A DIFFERENT PRODUCT PRODUCT PISTON AND CYLINDER INFORMATION DISASSEMBLY AND CLEANING GENERAL TROUBLE SHOOTING TECHNICAL INFORMATION AND MAINTENANCE PREVENTATIVE MAINTENANCE GENERAL DAILY WEEKLY MONTHS Unifiller Systems Inc. Page 2 of 20

3 SAFETY INSTRUCTIONS These safety instructions must be read prior to operating, sanitizing or servicing the equipment. All machines have a risk of personal injury wherever moving parts are involved in their operation. UNIFILLER has taken all possible precautions to reduce and wherever possible eliminate the dangers associated with moving parts. Having all operators of this equipment read and abide by the instructions in this manual will further reduce the risk of personal injury. Remove the air supply line before attempting to clean, dismantle, or service the machine. Keep fingers and hands away from all mechanical moving parts including the hopper inlet and deposit nozzle outlet. Do not try to service the Air regulator / Water filter with the air supply line connected. For servicing or technical support please contact UNIFILLER directly or one of its authorized suppliers or dealers. Do not run product or water, with temperatures exceeding 120 deg F (49 Deg C), through the machine. For Product Temperatures that exceed 120 deg F (49 Deg C) up to 180 deg F (82 Deg C), please use HOT changeover parts on the machine. Operating Air pressure should not be adjusted to exceed 80 P.S.I. (551 kpa /5.52 Bar) on the Air regulator / Water filter pressure gauge. Always wash out the machine after use, dismantle and lubricate all the seals (As per cleaning instructions in this manual). Follow the enclosed instructions carefully before operating the machine for the first time. IMPORTANT: All stainless steel parts are coated with a protective coating at the factory and therefore any stainless steel parts that may come into contact with product must first be washed in hot water and detergent. Remove the red plastic protective cap from the stainless steel block before assembling the hopper to the block. Unifiller Systems Inc. Page 3 of 20

4 WARNING DECALS NORTH AMERICA OUTSIDE NORTH AMERICA Unifiller Systems Inc. Page 4 of 20

5 Contacting UNIFILLER Thank you for purchasing Equipment from UNIFILLER. We strive to manufacture the world s best depositor, using the latest technology and components available. We are sure you will get years of trouble free use and excellent productivity from your new investment. Please take a few minutes to read this manual and familiarize yourself with the layout of the controls, and the set up and operating procedure. Please do not hesitate to contact us if you have any questions regarding the setting up or operation of your depositor. You can contact us from 7:00 a.m. to 3:30 p.m. Pacific standard time. UNIFILLER Systems Incorporated Macdonald Road Riverpointe Business Park Delta, B.C. V4G 1N3 Telephone Main: Toll Free: Parts & Service: Fax OR CONTACT YOUR LOCAL AUTHORIZED UNIFILLER DEALER. PLEASE SEE OUR WEBSITE FOR DEALER CONTACT INFORMATION Please remember to supply your company name, telephone number, fax number and a contact name when ordering parts. Please note there is a minimum charge of $30 U.S. for all spare parts orders. Unifiller Systems Inc. Page 5 of 20

6 INTRODUCTION BLOCK PIN The machine will not operate until the red handled block pin is correctly inserted fully. TOP COVER LOCKING The top covers on the 2000 Depositors are locked in place with two screws as shown in the picture below. Maintenance personnel will require a tool to open the cover. The air must be shut off before opening this cover. NOTE: FOR LOW LEVEL 2000, THE HOPPER MUST BE REMOVED FROM BASE AND MOVED FORWARD TO ALLOW ACCESS TO BASE COVER MAIN SHUT OFF VALVE The main-shut-off slide valve is located the frame must be in the OFF position before the top cover is opened. on Unifiller Systems Inc. Page 6 of 20

7 OPERATING PROCEDURES Air Requirements Important: It is recommended that the compressed air supplied to the depositor be run through an air dryer, as this will increase the service life of the pneumatic components. Please contact UNIFILLER for details. Optimum performance is achieved by setting the air pressure gauge on the machine to 80 P.S.I. (6 Bar) at rest, and at least 70 P.S.I. (5 Bar) while cycling. If not, check that the air supply to the machine is set to the correct pressure and not restricted by undersized fittings or hoses. A minimum 3/8 I.D (10mm) hose is required. Otherwise the deposit speed will be reduced. Typical compressor requirements: Minimum 2 horse power, capable of P.S.I.(7 Bar). 5 HP is the ideal size, as it will last many years longer. Connect your main air hose, which comes from your compressor (not supplied), to the UNIFILLER quick connector that is located just below the machines Air regulator / Water filter. A male barb fitting is supplied suitable for 3/8 I.D (10mm) hose with the female quick disconnect fitting. Unifiller Systems Inc. Page 7 of 20

8 Hopper set up Ensure that the beveled seal is in place. Then secure hopper in place by turning the hopper nut until tight Note: For safety purposes, the machine uses an air loss system and will not function if the hopper and lid connections are not in place. Ensure the Hopper Cover is in place. The machine will not operate if the connection is broken to the safety switch Unifiller Systems Inc. Page 8 of 20

9 Foot Switch or Hand Held Nozzle placement Remove the foot pedal from its locating pin on the upright of the frame and position it on the floor in a comfortable operating position. Not required if using a Hand Held Nozzle. Connect the air lines up to the fittings on the front of the base. (circled) Note: when using Hand Held Nozzle two of the airlines from this accessory will connect to these fittings and two to the accessory ports Unifiller Systems Inc. Page 9 of 20

10 Priming/Preparing to Deposit Priming is the procedure used to fill the depositing chamber with product mix as well as to remove all air pockets from within the empty machine. Air OFF turn the hand wheel located at the rear of the machine to about 50% of the depositing scale. Air On start the machine by pressing the foot switch or by squeezing the trigger on the hand gun depending on which attachment you have fitted. Place an empty container under the discharge spout and cycle the machine until the size of the deposits look consistent. The foot switch has two modes of operation as follows: 1. Press once and one measured amount will be deposited 2. Keep the foot pedal depressed, the depositor will cycle continuously depositing measured amounts. The Hand Held Nozzle acts similar to the foot pedal, one trigger of toggle switch releases one measured amount. Hold and it will continually cycle. Purge Button A Purge Button is located on the front base plate. This allows the depositor to be cycled manually with out the need of a foot pedal or an external signal. This can be used to Prime the depositor, or cycle it during cleaning. This button can also be used if on the rare occasion the depositor becomes stuck mid cycle. Press the button once and the machine will cycle. Unifiller Systems Inc. Page 10 of 20

11 Deposit Speed Control The Deposit Speed Control is the adjustment to obtain the desired speed of delivery of the Deposit speed control Knob product mix to the target area. Turn clockwise = decreased deposit speed Turn counter clockwise = increased deposit speed Important: - If a deposit speed adjustment is made after a volume has been set the volume may change. So be sure to re-adjust the deposit volume if required. % Volume scale Volume Adjustment 1. Run the machine for 2 or 3 cycles then check the weight of the last deposit. 2. With the air turned off, move the position of the red indicator along the scale by turning the hand wheel located at the rear of the machine. Turn the handle counter clockwise to increase the volume of the deposit, clockwise to decrease the volume of the deposit. 3. To decrease the deposit weight, move to a lower percentage setting on the scale, and to increase the weight, move to a higher percentage setting. 4. With the air turned on, make a deposit into a container and check the weight. 5. Note: - When starting to run continuously, the first couple of deposits may be a little heavier than the rest. More so for aerated product. 6. Once you have established the required weight, note the % position for future reference. Different products may have different scale settings, even if the weights are the same. Unifiller Systems Inc. Page 11 of 20

12 Working with the Depositor Products with high viscosities may cling to the inside of the hopper and should be scraped down periodically or kept more than ½ full to avoid sucking air through the middle and into the system. New batch: If the next type of product mix is compatible with the previous one, simply fill the hopper with the new product and discharge 3 or 4 deposits into a bowl and add it back into the hopper. Check deposited volume before continuing. Changing to a Different Product Scrape down the insides of the hopper, continue to deposit until empty. Pour a bucket of warm water into the hopper and wipe clean. Close the lid and reconnect the safety plugs Cycle the water out of the machine Add new product* and cycle the machine until acceptable output is achieved * It is recommended to work from light to dark product where possible. Unifiller Systems Inc. Page 12 of 20

13 PRODUCT PISTON AND CYLINDER INFORMATION There are 3 different sizes of product cylinder and product piston available. By using the correct size of cylinder for the deposit required you will maintain accuracy and speed. It is recommended that the % setting for the product piston be set between 15 to 80% of the scale. This will ensure optimum machine performance is achieved. See table for information. Size Piston and Cylinder Displacement Displacement Kits Part Numbers Volume (oz) (Max) Volume (ml) (Max) 1.5 (38.1 mm) oz 243 ml 2.5 (63.5 mm) oz 802 ml 4 (101.6 mm) oz 2000 ml O-Rings and Part# s Size Piston Part # Piston O-Ring Product Cylinder Part # Product Cylinder O-Ring V V V V V V Unifiller Systems Inc. Page 13 of 20

14 DISASSEMBLY AND CLEANING NOTE: Never store parts in a bucket. This prevents damage to sensitive components. Always store parts on a flat tray. General 1. Remove Hopper Cover and Scrape down the insides of the hopper. 2. Spray down with water to rinse as much product off as possible. 3. Replace Hopper Cover and continue to deposit until nothing more comes out of the outlet nozzle. 4. Pour a bucket of warm water up to 120 deg F (49 deg C) with a little mild detergent into the hopper and wipe the inside of the hopper clean. 5. Reduce deposit speed 6. By depressing the foot pedal or hand held nozzle, cycle the rest of the water out of the machine and into a bucket. 7. Repeat the above procedure by cycling a further bucket of warm clean water through the hopper and valve system. 8. Turn the air supply off by sliding the red main valve down and disconnect air hose. 9. Disconnect airlines from machine, connect the red and black quick connects together. This will stop water from entering the air cylinders during cleaning. Unifiller Systems Inc. Page 14 of 20

15 It is DO NOT SUBMERGE THE AIR CYLINDERS IN WATER 10. With the hopper empty, remove the hopper safety from base and unthread the Hopper from the machine and pull forward to allow draining of any excess water. 11. Unlock the rotary valve 12. Push the rotary valve out of the Valve Block Unifiller Systems Inc. Page 15 of 20

16 13. Pull the red safety pin out from the side. 14. Pull Red Safety Knob out of Block and remove from the base. 15. Remove the product cylinder, and store in a safe manner. 16. Remove the product piston 17. Use O-Ring tool Pt#22049 to remove the O rings. Unifiller Systems Inc. Page 16 of 20

17 18. Fill sink or bucket with water to the desired level, adding 1 to 4 ounces of Zep F.S. PROCESS CLEANER (green) per gallon of water. Immerse all parts removed in previous operations in the solution (see parts table further in the manual). Clean all food residues with a cloth or a non-metallic scrubbing pad. Rinse thoroughly with potable water. For the hopper and the small air cylinder, use the same solution in a squirt bottle and apply by spraying. 19. Make sure to inspect all O rings and seals for damage or wear; replace if required. Re-lubricate with food quality grease (as supplied with your machine). It is highly recommended to carry a complete spare set of O rings and seals, as these are vital to the accuracy of the machine. Unifiller Systems Inc. Page 17 of 20

18 TROUBLE SHOOTING Problem Cause Remedy Machine will not cycle Inconsistent deposits 1. Low air pressure. 2. Air on/off slider valve (Pt#1037) in down or mid position. 3. Rear pilot valve (Pt#1056) has loosened from its mount bracket or has failed. 4. Incomplete piston stroke caused by solid object in product cylinder. 5. Volume adjustment set to low. 6. Deposit speed set too low. 7. Kinked air lines. 8. Product being deposited is too hot. 9. Hopper safety plug not securely fastened on the base 1. Air leakage past product piston seal, possibly worn or damaged. 2. Hopper almost empty and sucking air. 3. Large air pocket in product mix. 4. Product inconsistent. 5. Thick product mix. 6. Air leakage past loose clamps. 7. Deposit speed set too high. 8. Fluctuating air supply pressure. 9. Water build up in air lines and valves. 1. Check air supply for correct operation. Also check pressure regulator setting. 2. Move slider valve on the air regulator to the On position. 3. Check the two pilot valves located under the main cover to ensure that they are securely fixed in their mount brackets. If failed, replace. 4. Remove product cylinder and check for obstruction. 5. Increase volume setting. 6. Adjust deposit speed. 7. Check air lines to make sure they are not kinked. 8. Ensure product temperature does not exceed 120 deg F (49 deg C) 9. Ensure hopper safety plug is securely fastened 1. Replace O-ring. (use the O-ring template to ensure correct sizing) 2. Fill hopper or scrape down. 3. Use product mix as soon as it comes off the mixer. 4. Supply smooth product mix. 5. Reduce deposit piston speed. 6. Check all clamps and ensure all flat seals are in place and in good condition. Replace seals or tighten clamps as required. 7. Reduce deposit speed. 8. Check setting of air regulator/water filter. 9. Drain air compressor regularly to remove build up of water. Unifiller Systems Inc. Page 18 of 20

19 Machine cycles but will not deposit Product leakage 1. Air quick connects are not secure. 2. Small air-cylinder not attached to rotary valve. 3. Rotary valve is Orientated incorrectly in relation to small aircylinder. 4. Product valve piston jammed. (Positive cut off nozzle only) 5. Product piston O-ring worn or missing. 6. Hopper is loose or beveled seal is missing. 1. Clamps (Pt#1260/1261) are not tight. 2. Product piston O-rings are worn or damaged. 1. Check that all air connections are securely attached. 2. Ensure Small Air-Cylinder is attached. 3. Ensure Valve is connected correctly. See page 22 for pictures. 4. If the product you are depositing is over 140deg F (60deg C), change the product valve to the high temperature version. 5. Replace the O-ring. Use the template to ensure correct sizing. 6. Check that the beveled seal is in place and is not damaged. Re-tighten hopper nut. 1. Check that all clamps are tight. 2. Replace O-rings. (use the template to ensure correct sizing) Product tails from nozzle. (Cake head attachment and positive cut off nozzle). Product splashes 3. Actuator shaft centering guide O- ring is worn. 1. Deposit speed set too low. 2. Wrong type of deposit outlet nozzle fitted. 3. Replace O-ring. (use the template to ensure correct sizing) 1. Increase deposit speed. 2. Change deposit outlet nozzle to correct type. 1. Deposit speed set too fast. 1. Decrease deposit speed.

20 TECHNICAL INFORMATION AND MAINTENANCE Preventative Maintenance Contact UNIFILLER for details about subscribing to our pre-ordered o-ring kit maintenance program. General The most vital part on the entire machine to be maintained is the product contact piston seals and O rings. These seals are inexpensive and should be replaced frequently. All These seals should be high quality Viton seal as supplied by UNIFILLER, or your authorized UNIFILLER dealer. Signs of wear include: - Flatness - Abrasions - Cracks Daily After parts have been cleaned, lubricate all seals and moving parts with food grade grease to prevent seals and surfaces from wearing prematurely. Weekly With the air supply turned off. Check the air filter/regulator bowl and if necessary clean the bowl and empty any accumulated water. 3 Months With the air supply turned off. Check the condition of the White filter in the Air regulator / Water filter, and replace if contaminated. Unifiller Systems Inc. Page 20 of 20

21

INSTRUCTIONS AND SPARE PARTS

INSTRUCTIONS AND SPARE PARTS COM1000i DEPOSITOR INSTRUCTIONS AND SPARE PARTS Manual Part # COMi-Ins-UK 12/08/2010 Translation from the Original Instructions Table of Contents Table of Contents 2 Safety Instructions and Warnings 5

More information

Sanitise Syrup Lines & Valves. Taylor PH61 Cleaning every 14 days

Sanitise Syrup Lines & Valves. Taylor PH61 Cleaning every 14 days Taylor PH61 Cleaning every 14 days Drain the Syrup Lines Remove each syrup feed tube from syrup bottle and let excess syrup drain from the feed tube back into the syrup bottle. When flow of syrup from

More information

ICED CAPPUCCINO MACHINE Taylor MODEL: 390

ICED CAPPUCCINO MACHINE Taylor MODEL: 390 4.8.6.3 ICED CAPPUCCINO MACHINE Taylor MODEL: 390 LOCATION: Front of House WHEN CLEANED: Daily, Weekly, Monthly, Seasonal TOOLS/SUPPLIES REQUIRED: Salmon Cloth 2 or 3-Compartment Sink Sink Detergent Sanitizer

More information

CBT LW MAINTENANCE GUIDE

CBT LW MAINTENANCE GUIDE CBT LW MAINTENANCE GUIDE PICTOGRAMS Each Signifier displayed here is specific to this User Manual. Menu Previous Advance Note Tip Example Powder Feeder Mixing Bowl Weigh Scale CBP Tanks Control Panel PSD

More information

2001 Smith Eastern Corporation

2001 Smith Eastern Corporation Automatic Spray Equipment Cleaning System User s Manual UG-45V Smith Eastern Corporation 10630-S Riggs Hill Road Jessup, Maryland 20794-9425 USA 301.497.7600 800.937.HVLP (4857) Fax 301.497.7613 cleaner@airverter.com

More information

PS-2/ES Automated pack & tag machine with IndES fastening system

PS-2/ES Automated pack & tag machine with IndES fastening system English Manual PS-2/ES Automated pack & tag machine with IndES fastening system Contents 1. Introduction 2. Important Safety Instructions 3. PS-2/ES 4. Unpacking the machine 5. Setting up the machine 6

More information

PrimePour TM Operation Manual

PrimePour TM Operation Manual COT2000 SERIES PrimePour TM Operation Manual READ BEFORE USE. 840247001 7/14 For more Good Thinking visit www.commercial.hamiltonbeach.com 840247001_v18.indd 1 IMPORTANT SAFETY INSTRUCTIONS WARNING When

More information

GETZ MANUFACTURING PART NO.: MODEL: SV1 100 PR VACUFILL SYSTEM (Revised 6/7/05)

GETZ MANUFACTURING PART NO.: MODEL: SV1 100 PR VACUFILL SYSTEM (Revised 6/7/05) GETZ MANUFACTURING PART NO.: 58616 MODEL: SV1 100 PR VACUFILL SYSTEM (Revised 6/7/05) GETZ SV1-100-PR VACU-FILL SYSTEM TABLE OF CONTENTS PAGE # 1... GETZ SV1-100-PR VACU-FILL SYSTEM 2... PARTS LIST 3...

More information

GETZ EQUIPMENT INNOVATORS PART NO.: 9G58619 MODEL: SV1 150 PR VACUFILL SYSTEM (Revised 2/25/14)

GETZ EQUIPMENT INNOVATORS PART NO.: 9G58619 MODEL: SV1 150 PR VACUFILL SYSTEM (Revised 2/25/14) GETZ EQUIPMENT INNOVATORS PART NO.: 9G58619 MODEL: SV1 150 PR VACUFILL SYSTEM (Revised 2/25/14) !!WARNING!! SEVERE DAMAGE AND/OR INJURY MAY RESULT DO NOT DISCHARGE ANY EXTINGUISHER CYLINDER EXCEEDING 195

More information

Model K 3000 G Part No

Model K 3000 G Part No K3000G Manual 11/30/01 4:56 PM Page 1 Model K 3000 G Part No. 1.133-110.0 High Pressure Washer Operator Manual Overview..................................1 Precautions...............................1-2

More information

Safety. Rinse Kit for Multi-Pro 1200 and 1250 Turf Sprayers Model No Safety and Instructional Decals. Installation Instructions

Safety. Rinse Kit for Multi-Pro 1200 and 1250 Turf Sprayers Model No Safety and Instructional Decals. Installation Instructions Rinse Kit for Multi-Pro 1200 and 1250 Turf Sprayers Model No. 106-4842 Form No. 3353-529 Rev B Installation Instructions Note: Determine the left and right sides of the machine from the normal operating

More information

Model LF-310 Air Operated

Model LF-310 Air Operated Microflush Half Gallon Toilets Model LF-310 Air Operated Installation/Service Manual P/N 24156 452 East Hill Road Fax: 707.459.6617 Willits, CA 95490 USA E-mail: info@microphor.com Phone: 707.459.5563

More information

CAUTION UM120W (RIGHT TANK) FOR WATER BORNE PAINTS ONLY UM120W (RIGHT TANK) SECTION IS NOT DESIGNED FOR USE WITH SOLVENT BASED PAINT

CAUTION UM120W (RIGHT TANK) FOR WATER BORNE PAINTS ONLY UM120W (RIGHT TANK) SECTION IS NOT DESIGNED FOR USE WITH SOLVENT BASED PAINT OPERATING MANUAL SOLVENT AND WATER BASE SPRAY GUN CLEANER UG5000W and UG5500W CAUTION UM120W (RIGHT TANK) FOR WATER BORNE PAINTS ONLY UM120W (RIGHT TANK) SECTION IS NOT DESIGNED FOR USE WITH SOLVENT BASED

More information

Page 1 of 18. Part# /5/2013

Page 1 of 18. Part# /5/2013 Part# 1002655-06 8/5/2013 This manual contains important information concerning the installation and operation of the gun washers listed above. Read manual thoroughly and keep for future reference INSTRUCTIONS

More information

SERVICE/INSTALLATION MANUAL ICE ONLY DISPENSERS MODELS-IOD150, IOD200 AND IOD250

SERVICE/INSTALLATION MANUAL ICE ONLY DISPENSERS MODELS-IOD150, IOD200 AND IOD250 SERVICE/INSTALLATION MANUAL ICE ONLY DISPENSERS MODELS-IOD150, IOD200 AND IOD250 Ice-O-Matic 11100 East 45th Ave Denver, Colorado 80239 Part Number 9081305-01 Date 10/08 Introduction IOD150,IOD200,IOD250

More information

Operation and Safety Manual. Model LNKB15. Planetary Mixer. Medium Duty; Gear-driven; Manual operation

Operation and Safety Manual. Model LNKB15. Planetary Mixer. Medium Duty; Gear-driven; Manual operation Medium Duty; Gear-driven; Manual operation Model LNKB15 Planetary Mixer DO NOT ATTEMPT TO OPERATE THIS MACHINE UNTIL YOU HAVE READ AND UNDERSTOOD THIS OPERATION AND SAFETY MANUAL. SAFETY ISSUES 1. NEVER

More information

Model K 4400 G Part No High Pressure Washer

Model K 4400 G Part No High Pressure Washer Model K 4400 G Part No. 1.133-208.0 High Pressure Washer Table of Contents Overview..................................1 Precautions...............................1-2 Assembly Instructions.........................3

More information

SUPERIOR PERFORMANCE

SUPERIOR PERFORMANCE Economy (E) Series Blast Cabinet Owner s Manual SUPERIOR PERFORMANCE And Quality In Blast Cleaning Equipment! WARNING READ MANUAL Failure to read, understand & follow all safety and operation procedures

More information

OPERATING MANUAL MANUAL WATER BASE GUN CLEANERS UM120W UNI-RAM CORPORATION ONTARIO CANADA PATENTS

OPERATING MANUAL MANUAL WATER BASE GUN CLEANERS UM120W UNI-RAM CORPORATION ONTARIO CANADA PATENTS OPERATING MANUAL MANUAL WATER BASE GUN CLEANERS UM120W PATENTS USA 4,788,836 CANADA USA 5,213,117 ENGLAND EUROPE 0300248 ITALY SWEDEN 0300248 GERMANY FRANCE 8110528.0 JAPAN UNI-RAM CORPORATION ONTARIO

More information

Getz Equipment Innovators 450 lb Dual Portable Dry Chemical Fill System

Getz Equipment Innovators 450 lb Dual Portable Dry Chemical Fill System Getz Equipment Innovators 450 lb Dual Portable Dry Chemical Fill System 1 Revised 11/18/10 2320 Lakecrest Drive, Pekin IL 61554 PH. (888) 747-4389 Fax (309) 495-0625 Website: www.getzequipment.com LIMITED

More information

NOTE: Parts are no longer available for this tool. The manual will continue on the next page.

NOTE: Parts are no longer available for this tool. The manual will continue on the next page. NOTE: Parts are no longer available for this tool. The manual will continue on the next page. ------------------------------------------------- CATALOG NO. 7628 Form No. Z21 0 Date 1-93 High Pressure Power

More information

OPERATING MANUAL UG2000D SERIES SPRAY GUN CLEANERS UG2000D, UG2000DM UNI-RAM CORPORATION ONTARIO CANADA UG2000DM UG2000D REVISION

OPERATING MANUAL UG2000D SERIES SPRAY GUN CLEANERS UG2000D, UG2000DM UNI-RAM CORPORATION ONTARIO CANADA UG2000DM UG2000D REVISION OPERATING MANUAL UG2000D SERIES SPRAY GUN CLEANERS UG2000D, UG2000DM UG2000D UG2000DM UNI-RAM CORPORATION ONTARIO CANADA REVISION 2015-08 INTRODUCTION Uni-ram holds many patents on designs used in its

More information

OWNER S MANUAL MODULAR DIRECT CONNECTED TILTING STEAM JACKETED KETTLE

OWNER S MANUAL MODULAR DIRECT CONNECTED TILTING STEAM JACKETED KETTLE OWNER S MANUAL MODULAR DIRECT CONNECTED TILTING STEAM JACKETED KETTLE MODELS: MT6 MT6T6 MT10 MT10T10 MT10T6 LFT6 LFT10 LFT10T6 LFT10T10 Form Number: S-2306 REV:C 10/12 Printed in U.S.A. 35 Garvey Street

More information

120V CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY

120V CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY KING COBRA 1200 120V INFORMATION & OPERATING INSTRUCTIONS CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY

More information

Operating Instructions for the BBO-1 and BBO-2 Basket Blasters

Operating Instructions for the BBO-1 and BBO-2 Basket Blasters Operating Instructions for the BBO-1 and BBO-2 Basket Blasters 2101 West Cabot Boulevard Langhorne, PA 19047-1893 www.empire-airblast.com Page 2 Model Number: Serial Number: Date of Purchase: Date of Installation:

More information

USER MANUAL SPRAY GUN CLEANER - WATER BASED PAINTS UA400W CAUTION FOR WATER BORNE PAINTS ONLY

USER MANUAL SPRAY GUN CLEANER - WATER BASED PAINTS UA400W CAUTION FOR WATER BORNE PAINTS ONLY USER MANUAL SPRAY GUN CLEANER - WATER BASED PAINTS UA400W CAUTION FOR WATER BORNE PAINTS ONLY THIS UNIT IS NOT DESIGNED FOR USE WITH SOLVENT BASED PAINT UNI-RAM CORPORATION ONTARIO CANADA REV 2010-09 CONTENTS

More information

Model K 5800 G Part No

Model K 5800 G Part No K5800G Manual 11/30/01 5:02 PM Page 1 Model K 5800 G Part No. 1.194-103.0 High Pressure Washer Operator Manual Overview..................................1 Precautions...............................1-2

More information

UM120W OPERATING MANUAL MANUAL WATERBORNE GUN CLEANER CAUTION FOR WATERBORNE PAINTS ONLY UNI-RAM CORPORATION ONTARIO CANADA

UM120W OPERATING MANUAL MANUAL WATERBORNE GUN CLEANER CAUTION FOR WATERBORNE PAINTS ONLY UNI-RAM CORPORATION ONTARIO CANADA OPERATING MANUAL MANUAL WATERBORNE GUN CLEANER UM120W CAUTION FOR WATERBORNE PAINTS ONLY THIS UNIT IS NOT DESIGNED FOR USE WITH SOLVENT BASED PAINT UNI-RAM CORPORATION ONTARIO CANADA Revised 2009-03 CONTENTS

More information

BLAST-IT-ALL BUMPER BLASTER

BLAST-IT-ALL BUMPER BLASTER LARRY HESS AND ASSOCIATES, INC 185 PIPER LANE / SALISBURY, NC 28147 PHONE: 1-800-535-2612 / FAX: 1-704-638-9311 WWW.BLAST-IT-ALL.COM BLAST-IT-ALL BUMPER BLASTER SUCTION BLAST CABINET NOTE: It is the responsibility

More information

HERSHEY S Classic Syrup Dispenser

HERSHEY S Classic Syrup Dispenser HERSHEY S Classic Syrup Dispenser COMPLETE UNIT 87952 MODEL: SPPH PUMP ONLY 88548 MODEL: BP-1 Used with Hershey s 64 oz pouches with 16mm fitments. Thank You...for purchasing this dispenser. The reliable,

More information

Model # VWK-2 INSTRUCTION MANUAL

Model # VWK-2 INSTRUCTION MANUAL Model # VWK-2 INSTRUCTION MANUAL Ver. March 2015 ALA Scientific Instruments Inc. 60 Marine Street Farmingdale, NY 11735 Tel. # 631.393.6401 Fax: # 631.393.6407 E-mail: support@alascience.com www.alascience.com

More information

User Manual AIR HOG. Vacuum Booster REV. 3/20/ Stowe Dr. Poway, CA P: (858) F: (858)

User Manual AIR HOG. Vacuum Booster REV. 3/20/ Stowe Dr. Poway, CA P: (858) F: (858) User Manual AIR HOG Model: 7303L Vacuum Booster REV. 3/20/18 13655 Stowe Dr. Poway, CA 92064 P: (858) 679-1191 F: (858) 726-6005 INTRODUCTION Dear Customer: Congratulations on the purchase of your new

More information

High Pressure Washer Operator Manual. Specifications Model HD 2700 DH/DB

High Pressure Washer Operator Manual. Specifications Model HD 2700 DH/DB Model HD 2700 DB Part No. 1.194-116 Model HD 2700 DH Part No. 1.194-117 Model HD 3000 DH Part No. 1.187-115 Model HD 3500 DH Part No. 1.810-997 Model HD 3500 DB Part No. 1.810-998 High Pressure Washer

More information

APW-VAP-150P High Pressure Cleaner Operator Manual

APW-VAP-150P High Pressure Cleaner Operator Manual APW-VAP-150P High Pressure Cleaner Operator Manual BEFORE OPERATING THIS APPLIANCE PLEASE READ THESE INSTRUCTIONS CAREFULLY Item Description OVERVIEW 1. High pressure washer 2. On/off switch 3. Water outlet

More information

TERMINATOR 120V CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL

TERMINATOR 120V CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL TERMINATOR 120V INFORMATION & OPERATING INSTRUCTIONS CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL 56041962 IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY

More information

INDEX. Granita Machine. Operation a nd Instruction Manual

INDEX. Granita Machine. Operation a nd Instruction Manual INDEX Index 2 Unpacking 3 Positioning the machine 3 Familiarizing yourself with the Controls 4 Cleaning and Sanitizing instructions 5 Part ONE. Disassembly and Cleaning of Dispenser 5 Part TWO. Re-assemble

More information

OPERATOR'S MANUAL. IMPORTANT: READ OPERATOR'S MANUAL CAREFULLY Please fill out & return your warranty card! DP80405

OPERATOR'S MANUAL. IMPORTANT: READ OPERATOR'S MANUAL CAREFULLY Please fill out & return your warranty card! DP80405 CARBON SPOT 30 EXTRACTOR OPERATOR'S MANUAL IMPORTANT: READ OPERATOR'S MANUAL CAREFULLY Please fill out & return your warranty card! DP80405 Diamond Products www.diamondproductsus.com Printed in the U.S.A.

More information

RTP9 ROTARY TABLET PRESS USER MANUAL

RTP9 ROTARY TABLET PRESS USER MANUAL RTP9 ROTARY TABLET PRESS USER MANUAL LFA Tablet Presses is a trading name of LFA Machines Oxford LTD All of the content in this document is covered by copyright CONTENTS Page 1. Introduction Page 1. Technical

More information

Machine MANUAL. Spaceman USA, LLC. Sales and Product Information Sunday Saturday 8 AM 5 PM Mountain. 226 Commerce Street Suite B Broomfield, CO 80020

Machine MANUAL. Spaceman USA, LLC. Sales and Product Information Sunday Saturday 8 AM 5 PM Mountain. 226 Commerce Street Suite B Broomfield, CO 80020 Machine MANUAL MODEL SM-6650 FROZEN BEVERAGE - COUNTERTOP - ONE FLAVOR Customer Service Spaceman USA, LLC Sales and Product Information Sunday Saturday 8 AM 5 PM Mountain 226 Commerce Street Suite B Broomfield,

More information

Operator Manual Powdered Beverage Dispensers PIC3, PIC33A, PIC5, PIC6

Operator Manual Powdered Beverage Dispensers PIC3, PIC33A, PIC5, PIC6 Operator Manual Powdered Beverage Dispensers PIC3, PIC33A, PIC5, PIC6 Model PIC3 Model PIC5 with Island Option Safety Information...2 Installation...3 Operation...4 Cleaning...5 Adjustments...8 Maintenance...9

More information

OPERATING MANUAL SOLVENT SPRAY GUN CLEANERS UG5000E, UG5000DVM AND UG5500E UNI-RAM CORPORATION ONTARIO CANADA PATENTS

OPERATING MANUAL SOLVENT SPRAY GUN CLEANERS UG5000E, UG5000DVM AND UG5500E UNI-RAM CORPORATION ONTARIO CANADA PATENTS OPERATING MANUAL SOLVENT SPRAY GUN CLEANERS UG5000E, UG5000DVM AND UG5500E PATENTS USA 4,788,836 CANADA USA 5,213,117 ENGLAND EUROPE 0300248 ITALY SWEDEN 0300248 GERMANY FRANCE 8110528.0 JAPAN UNI-RAM

More information

CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL

CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL KING COBRA 310 120V INFORMATION & OPERATING INSTRUCTIONS U. S. PRODUCTS CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL 56041963 IMPROPER USE OF THE MACHINE

More information

Model HD 3501 Part No High Pressure Washer Operator Manual

Model HD 3501 Part No High Pressure Washer Operator Manual 0 15 25 40 25 Nozzle Identification SOAP HD3501 Manual 4/22/02 6:57 PM Page 1 Model HD 3501 Part No. 1.810-999.0 High Pressure Washer Operator Manual Overview..................................1 Precautions...............................1-2

More information

Models: GW/R-T GW/R-2-T GW/R-3-T

Models: GW/R-T GW/R-2-T GW/R-3-T Part# GW/R-T-OM 1/12/04 TN Models: GW/R-T GW/R-2-T GW/R-3-T This manual contains important information concerning the installation and operation of the gun washers listed above. Read manual thoroughly

More information

01694-REVC_081315_ENGLISH

01694-REVC_081315_ENGLISH 01694-REVC_081315_ENGLISH MODEL: CSP EZ-CREAM TM 3/8 OUNCE, CHICK-FIL-A 120V Series 14I 94152 SAFETY GUIDELINES WHEN USING THIS UNIT: C Warning- E Electrical shock could occur: This unit must be earthed

More information

Model K 520 M Part No

Model K 520 M Part No Model K 520 M Part No. 1.069-680.0 High Pressure Washer Operator Manual Overview... 2 Precautions... 2-4 Assembly Instructions... 4 Operating Instructions... 5 Using the Accessories... 6 Working with Detergents...

More information

TR Shower Panel. Operating manual. Hygiene Equipment Designed for People. Serial Number:

TR Shower Panel. Operating manual. Hygiene Equipment Designed for People. Serial Number: Operating manual Serial Number: Registered at Medical Products Agency, Sweden, as a MD Class 1 product, MDD 93/42EEC. TR reserves the right to make design changes and/or improvements without notice. Always

More information

SOLUS-500 EXTRACTOR 120V

SOLUS-500 EXTRACTOR 120V SOLUS-500 EXTRACTOR 120V INFORMATION & OPERATING INSTRUCTIONS DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always use

More information

SAFETY PRECAUTIONS. 2) Before operating machine: - Make sure all safety devices are in place and operate properly.

SAFETY PRECAUTIONS. 2) Before operating machine: - Make sure all safety devices are in place and operate properly. TABLE OF CONTENTS Machine Components Safety Precautions Machine Set Up Machine Operation Machine Maintenance & Storage Troubleshooting Technical Specifications Parts Lists Wiring Diagram 1 2 3 3-4 5 6

More information

Trooper Portable Carpet Extractor. Operator and Parts Manual. Model No.: Can Rev. 00 (09-99)

Trooper Portable Carpet Extractor. Operator and Parts Manual. Model No.: Can Rev. 00 (09-99) Trooper 1000 Portable Carpet Extractor Model No.: 608811 609229 Can. Operator and Parts Manual NOBLES 12875 RANSOM STREET HOLLAND MI 92 U.S.A. CUSTOMER SERVICE: 1-800-365-6625 FAX: 1 800 678 20 608812

More information

OPERATOR'S MANUAL CD 400 / CD 500

OPERATOR'S MANUAL CD 400 / CD 500 STATEMENT OF LIMITED WARRANTY MÁQUINAS AGRÍCOLAS JACTO S.A. shall warrant the equipment described in this manual and shall repair or replace parts and components which, under normal operation and wear,

More information

INSTALLATION AND SERVICE MANUAL FOR THE SERIES 2000 & SERIES 3000 FAN SERIES GEN 2

INSTALLATION AND SERVICE MANUAL FOR THE SERIES 2000 & SERIES 3000 FAN SERIES GEN 2 INSTALLATION AND SERVICE MANUAL FOR THE SERIES 2000 & SERIES 3000 FAN SERIES GEN 2 (PNEUMATIC CONTROL AND HYDRAULIC CONTROL) PUBLICATION No. 01900 Revision 2 Printed in Canada 1.1 INTRODUCTION Thank you

More information

PJ130S High Pressure Cleaner

PJ130S High Pressure Cleaner PJ130S High Pressure Cleaner Operator Manual Original instructions WARNING: Do not use the machine without reading the instruction sheet. Item Description OVERVIEW 1. High pressure washer 2. On/off switch

More information

FiberPRO 2.5 H. Heated Spot Extractor. Operator and Parts Manual E

FiberPRO 2.5 H. Heated Spot Extractor. Operator and Parts Manual E E29976-00 FiberPRO 2.5 H Heated Spot Extractor Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical Service: 877-856-5954 www.betco.com

More information

CADDY 5 UL OPERATOR S MANUAL

CADDY 5 UL OPERATOR S MANUAL CADDY 5 UL CADDY ENGLISH 10 UL OPERATOR S MANUAL CADDY 1 TECHNICAL CHARACTERISTICS Read electrical ratings written on the data plate under the individual units. The serial number of the unit is preceded

More information

Self-Contained Electric Steam Jacketed Kettle

Self-Contained Electric Steam Jacketed Kettle OWNERS MANUAL Self-Contained Electric Steam Jacketed Kettle Model: FT-20CE COVERING: INSTALLATION OPERATION SERVICE & PARTS An Employee Owned Company 35 Garvey Street l Everett l MA l 02149 Tel: (617)

More information

ICE/BEVERAGE DISPENSER

ICE/BEVERAGE DISPENSER ICE/BEVERAGE DISPENSER MODEL: ENDURO-175 8 VALVE OPERATOR S MANUAL Release Date: March 1, 2004 Publication Number: 620917901OPR Revision Date: August 3, 2010 Revision: C Visit the IMI Cornelius web site

More information

INSTALLATION AND SERVICE MANUAL FOR THE SERIES 2000 & SERIES 3000 FAN SERIES GEN 1

INSTALLATION AND SERVICE MANUAL FOR THE SERIES 2000 & SERIES 3000 FAN SERIES GEN 1 INSTALLATION AND SERVICE MANUAL FOR THE SERIES 2000 & SERIES 3000 FAN SERIES GEN 1 (PNEUMATIC CONTROL AND HYDRAULIC CONTROL) PUBLICATION No. 01524 Revision 15 Printed in Canada 1.1 INTRODUCTION Thank

More information

ICE ONLY DISPENSERS MODELS-IOD150, IOD200 AND IOD250 INSTALLATION/SERVICE MANUAL

ICE ONLY DISPENSERS MODELS-IOD150, IOD200 AND IOD250 INSTALLATION/SERVICE MANUAL ICE ONLY DISPENSERS MODELS-IOD150, IOD200 AND IOD250 INSTALLATION/SERVICE MANUAL Ice-O-Matic 111000 East 45th Ave Denver, Colorado 80239 Part Number 9081305-01 Rev. C Revision Date: September 19, 2011

More information

Model HC-2. Crathco Whipped Hot Chocolate Dispenser. Table of Contents. Operation and Instruction Manual. for

Model HC-2. Crathco Whipped Hot Chocolate Dispenser. Table of Contents. Operation and Instruction Manual. for Crathco Whipped Hot Chocolate Dispenser Operation and Instruction Manual Table of Contents Introduction...1 Specifications...2 Installation and Start-Up Procedures...2 How to Dispense Hot Chocolate...3

More information

Model K 330 M Part No

Model K 330 M Part No Model K 330 M Part No. 1.994-916.0 High Pressure Washer Operator Manual Overview..................................1 Precautions...............................1-3 Assembly Instructions.........................3

More information

As part of the V.I.P. family, you are entitled to the best protection by one of the most comprehensive warranties in the industry.

As part of the V.I.P. family, you are entitled to the best protection by one of the most comprehensive warranties in the industry. CONGRATULATIONS on your purchase of a Viper product, and welcome to the V.I.P. family. We appreciate your business and will do everything in our power to keep you happy with your purchase for many years

More information

Bob-White Systems: AUTOMATED BOTTLE FILLER

Bob-White Systems: AUTOMATED BOTTLE FILLER Bob-White Systems: AUTOMATED BOTTLE FILLER PRODUCT CAPPER MANUAL General Safety Rules WARNING: READ ALL INSTRUCTIONS. Failure to follow the safety rules listed below and other basic safety precautions

More information

EFX 600. aquamanta. Instruction Manual. 4year guarantee. the experts in aquatic technology. >600 Litres

EFX 600. aquamanta. Instruction Manual. 4year guarantee. the experts in aquatic technology. >600 Litres EFX 600 aquamanta TM the experts in aquatic technology >600 Litres Coldwater Tropical Marine 4year guarantee Instruction Manual Important Safeguards This appliance is not intended for use by persons (including

More information

Airfield Industrial Estate Hixon Staffordshire ST18 0PF

Airfield Industrial Estate Hixon Staffordshire ST18 0PF Deluge Thermostatic Basin Mixer IT1002CP Installation and Maintenance Instructions Intatec Ltd Airfield Industrial Estate Hixon Staffordshire ST18 0PF In this procedure document we have endeavoured to

More information

K 2.97 M. Specifications Operating pressure, max PSI Water volume GPM Voltage V Amp draw AMPS

K 2.97 M. Specifications Operating pressure, max PSI Water volume GPM Voltage V Amp draw AMPS K 2.97 M High Pressure Washer Operator Manual Overview... 2 Important Precautions... 3-4 Assembly Instructions... 4 Operating Instructions... 5 GFCI Instructions... 6 Using the Accessories... 6 Working

More information

Setup. Important. Texture Spraying (material supplied from unit)

Setup. Important. Texture Spraying (material supplied from unit) Setup Setup Important If you are going to stop spraying for more than 5 minutes, turn sprayer off to prevent shortened pump hose life. Do not allow material to dry inside pump, hoses, gun or spray system.

More information

Installation Manual UNIVERSAL C-750 PRE-MIX DISPENSER

Installation Manual UNIVERSAL C-750 PRE-MIX DISPENSER IMI CORNELIUS INC One Cornelius Place Anoka, MN 55303-6234 Telephone (800) 238-3600 Facsimile (612) 422-3246 Installation Manual UNIVERSAL C-750 PRE-MIX DISPENSER Part No. 185211000 January 25, 1984 Revised:

More information

BEFORE OPERATING THE MACHINE: WARNING

BEFORE OPERATING THE MACHINE: WARNING BEFORE OPERATING THE MACHINE: Read the manual carefully and completely before attempting to operate the unit. This manual has important information for the use and safe operation of the machine. Keep this

More information

BLAST-IT-ALL PRESSURE BLAST CABINET

BLAST-IT-ALL PRESSURE BLAST CABINET LARRY HESS AND ASSOCIATES, INC 185 PIPER LANE / SALISBURY, NC 28147 PHONE: 1-800-535-2612 / FAX: 1-704-638-9311 WWW.BLAST-IT-ALL.COM BLAST-IT-ALL PRESSURE BLAST CABINET NOTE: It is the responsibility of

More information

OWNER S MANUAL. Models: Herkules Equipment Corporation 2760 Ridgeway Court Walled Lake, MI USA Fax

OWNER S MANUAL. Models: Herkules Equipment Corporation 2760 Ridgeway Court Walled Lake, MI USA Fax Part# 1000692 7/12/99 tn INSTRUCTIONS This manual contains important information concerning the installation and operation of the gun washers listed at the right. Read manual thoroughly and keep for future

More information

17 GALLON PROFESSIONAL RESTROOM CLEANER

17 GALLON PROFESSIONAL RESTROOM CLEANER CR2 COMPLETE RESTROOM RESTORATION 17 GALLON PROFESSIONAL RESTROOM CLEANER OWNER S/OPERATOR S MANUAL PROUDLY DESIGNED AND MANUFACTURED BY WWW.EDIC-USA.COM UNPACKING YOUR NEW CR2: When your machine is delivered,

More information

AGITATOR V DO NOT OPERATE THE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THESE INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY

AGITATOR V DO NOT OPERATE THE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THESE INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY AGITATOR 20 120V INFORMATION & OPERATING INSTRUCTIONS DO NOT OPERATE THE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THESE INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always use

More information

MANUAL COVER. To expedite parts ordering or technical questions, please include your Model and Serial Number listed below in all correspondence.

MANUAL COVER. To expedite parts ordering or technical questions, please include your Model and Serial Number listed below in all correspondence. MANUAL COVER We at Larry Hess & Associates, Inc. would like to take this opportunity to thank you for your patronage. The machine you have purchased has been manufactured and assembled in the USA with

More information

OPERATING MANUAL AUTOMATIC SPRAY GUN CLEANERS UG7500 SERIES UNI-RAM CORPORATION ONTARIO CANADA PATENTS

OPERATING MANUAL AUTOMATIC SPRAY GUN CLEANERS UG7500 SERIES UNI-RAM CORPORATION ONTARIO CANADA PATENTS OPERATING MANUAL AUTOMATIC SPRAY GUN CLEANERS UG7500 SERIES PATENTS U.S.A. 4,785,836 CANADA 1293909 U.S.A. 5,213,117 ENGLAND EP 0300248 (UK) EUROPE 0300248 ITALY 69760/BE/92 SWEDEN 0300248 GERMANY DE 38

More information

Bob White Systems. the Bucket Milker Manual - Cow

Bob White Systems. the Bucket Milker Manual - Cow Bob White Systems the Bucket Milker Manual - Cow Attention: Please read instructions thoroughly before using equipment Upon receiving the unit, please check IMMEDIATELY to see whether there is any visible

More information

TECHNICAL MANUAL TRAY DRYER

TECHNICAL MANUAL TRAY DRYER TECHNICAL MANUAL FOR TRAY DRYER MODEL TD321-3 TRAYDRYER MODEL: TD 321-3 Table of Contents Part 1 - Technical Information * Introduction * Catalogue Cut-sheet and Installation Drawing * Warranty Part 2

More information

Teflon Rotary Drum Pump

Teflon Rotary Drum Pump Operating Instructions & Parts Manual 6005 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and

More information

Advisory Bulletin. TB-106 Cleaning and Maintenance For Bobrick B-850, B-855, B-856 or B-858 Automatic Counter-Mounted Soap Dispensers

Advisory Bulletin. TB-106 Cleaning and Maintenance For Bobrick B-850, B-855, B-856 or B-858 Automatic Counter-Mounted Soap Dispensers Advisory Bulletin TB-106 Cleaning and Maintenance For Bobrick B-850, B-855, B-856 or B-858 Automatic Counter-Mounted Soap Dispensers Quality soap dispensers require good quality soap and periodic maintenance

More information

English. Your Model Number is: HD1500 IMPORTANT

English. Your Model Number is: HD1500 IMPORTANT Your Model Number is: HD1500 IMPORTANT Attention Valued Customer: The serial number of your machine and date of purchase is necessary information to facilitate warranty claims and the ordering of replacement

More information

ATTIAS MANUFACTURERS OF ATTIAS DOUGH MIXERS 265 BOWERY NEW YORK, N.Y TEL: (212) FAX: (212) COMMERCIAL DOUGH MIXERS

ATTIAS MANUFACTURERS OF ATTIAS DOUGH MIXERS 265 BOWERY NEW YORK, N.Y TEL: (212) FAX: (212) COMMERCIAL DOUGH MIXERS ATTIAS MANUFACTURERS OF ATTIAS DOUGH MIXERS 265 BOWERY NEW YORK, N.Y. 10002 TEL: (212) 475-0145 FAX: (212) 979-1423 COMMERCIAL DOUGH MIXERS INSTALLATION AND OPERATING INSTRUCTION MANUAL MODEL# USA-60 MODEL#

More information

Pocket Hardmount. Preventative Maintenance.

Pocket Hardmount. Preventative Maintenance. Pocket Hardmount Preventative Maintenance www.comlaundry.com Part No. 7-04-49 November 2005 Table of Contents Daily...2 Beginning of the Day...2 End of the Day...4 Weekly...6 Monthly...7 Quarterly...11

More information

MODEL 7000 SUCTION UNIT

MODEL 7000 SUCTION UNIT MODEL 7000 SUCTION UNIT OPERATOR S MANUAL Caution Federal law restricts this device to sale by or on order of a physician, or any other practitioner licensed by the law of the State in which he practices

More information

AIR OPERATED CLUTCH & BRAKE BLEEDING KIT. MODEL NO: CHT637 Part No: OPERATING & MAINTENANCE INSTRUCTIONS GC01/12

AIR OPERATED CLUTCH & BRAKE BLEEDING KIT. MODEL NO: CHT637 Part No: OPERATING & MAINTENANCE INSTRUCTIONS GC01/12 AIR OPERATED CLUTCH & BRAKE BLEEDING KIT MODEL NO: CHT637 Part No: 1801637 OPERATING & MAINTENANCE INSTRUCTIONS GC01/12 INTRODUCTION Thank you for purchasing this CLARKE Clutch & Brake Bleeding Kit. Before

More information

Product Manual. Scotsman. Models: 10150, and 10250

Product Manual. Scotsman. Models: 10150, and 10250 Product Manual Scotsman Models: 10150, 10200 and 10250 IN TRO DUC TION This service manual is intended as a reference for the installer, user, and service agent of this Scotsman ice dispenser. It includes

More information

Nilfisk Inc Winnetka Avenue North Minneapolis, MN REV.03( ) VF80189

Nilfisk Inc Winnetka Avenue North Minneapolis, MN REV.03( ) VF80189 Nilfisk Inc. 9435 Winnetka Avenue North Minneapolis, MN 55445 www.usviper.com REV.03(05-) VF8089 SAFETY PRECAUTIONS This machine is intended for commercial use. It is constructed for use in an indoor

More information

HOT WASHER MODEL NO: KING150

HOT WASHER MODEL NO: KING150 WARNING: Do not use the hot washer without reading this manual HOT WASHER MODEL NO: KING150 PART NO: 7320175 OPERATION & MAINTENANCE INSTRUCTIONS LS1215 INTRODUCTION Thank you for purchasing this CLARKE

More information

K Specifications. Max. Water Volume

K Specifications. Max. Water Volume K 2.35 High Pressure Washer Operator Manual Overview... 2 Precautions... 2-4 Assembly Instructions... 4 Operating Instructions... 5 Using the Accessories... 6 Working with Detergents... 7 Shut Down and

More information

K Specifications. Max. Water Volume

K Specifications. Max. Water Volume K 2.75 High Pressure Washer Operator Manual Overview... 2 Precautions... 2-4 Assembly Instructions... 4 Operating Instructions... 5 Using the Accessories... 6 Working with Detergents... 7 Shut Down and

More information

Inta City Shower Mixing Valve CT20010CP

Inta City Shower Mixing Valve CT20010CP Inta City Shower Mixing Valve CT20010CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility

More information

OPERATING MANUAL SPRAY GUN CLEANERS UG UG3000 SERIES UNI-RAM CORPORATION ONTARIO CANADA PATENTS

OPERATING MANUAL SPRAY GUN CLEANERS UG UG3000 SERIES UNI-RAM CORPORATION ONTARIO CANADA PATENTS OPERATING MANUAL SPRAY GUN CLEANERS UG1000 - UG3000 SERIES PATENTS USA 4,788,836 CANADA USA 5,213,117 ENGLAND EUROPE 0300248 ITALY SWEDEN 0300248 GERMANY FRANCE 8110528.0 JAPAN UNI-RAM CORPORATION ONTARIO

More information

SOLUS-310 EXTRACTOR 120V

SOLUS-310 EXTRACTOR 120V SOLUS-310 EXTRACTOR 120V INFORMATION & OPERATING INSTRUCTIONS DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always use

More information

FILLING & CLEANING GUIDE

FILLING & CLEANING GUIDE FILLING & CLEANING GUIDE 2017 VENDORS EXCHANGE INTERNATIONAL, INC. Dear Valued Customer, Thank you for purchasing the Wittenborg 9100. This manual outlines filling and cleaning steps to keep your machine

More information

LP GAS PIZZA OVEN USER MANUAL

LP GAS PIZZA OVEN USER MANUAL LP GAS PIZZA OVEN USER MANUAL To reduce the risk of fire, burn hazard or other injury, read the USER MANUAL carefully and completely before using this appliance FOR OUTDOOR USE ONLY Before Cleaning, make

More information

Explorer CleaningPartsDirect.com Carpet Extractor. Operator and Parts Manual. Home Find... Go To.. Model No.: Can.

Explorer CleaningPartsDirect.com Carpet Extractor. Operator and Parts Manual. Home Find... Go To.. Model No.: Can. Explorer 1500 Carpet Extractor Model No.: 608808 609231 Can. Operator and Parts Manual CleaningPartsDirect.com 662-393-3045 NOBLES 12875 RANSOM STREET HOLLAND MI 49424 U.S.A. CUSTOMER SERVICE: 1-800-365-6625

More information

3000W Pressure Washer RAC - HP006

3000W Pressure Washer RAC - HP006 3000W Pressure Washer RAC - HP006 Pressure Washer - Assemble and peration Assembly WANING: Before assembly ensure the on/off switch is off and the unit is not connected to the electric supply. Connect

More information

Bottle Pump. Thank You MODEL: BP-1

Bottle Pump. Thank You MODEL: BP-1 Bottle Pump MODEL: BP-1 Your lid may vary depending on specific model number. Thank You...for purchasing our Stainless Steel Hybrid Pump. This quality, NSF listed pump delivers precise portions and is

More information

User information. Cleaning/descaling and sanitizing

User information. Cleaning/descaling and sanitizing User information How the dispenser works Follett s 110 series automatic-load ice and water dispensers are equipped with Follett s 425 lb (193 kg)/day ice machine. In the continuous icemaking process, water

More information

Chiller with BP-1 1/2 oz Pump

Chiller with BP-1 1/2 oz Pump Chiller with BP- / oz Pump MODEL: CCP CHILLER WITH BP- / OZ PUMP 800 0V BP- / OZ PUMP ONLY 888 Thank You...for purchasing our Chiller with / oz Pump. This quality, NSF listed pump delivers precise, chilled

More information

Machine MANUAL. Soft Serve - Countertop - Two Flavor + Twist. Spaceman USA, LLC. Sales and Product Information Sunday Saturday 8 AM 5 PM Mountain

Machine MANUAL. Soft Serve - Countertop - Two Flavor + Twist. Spaceman USA, LLC. Sales and Product Information Sunday Saturday 8 AM 5 PM Mountain Machine MANUAL MODEL SM-6235H Soft Serve - Countertop - Two Flavor + Twist Customer Service Spaceman USA, LLC Sales and Product Information Sunday Saturday 8 AM 5 PM Mountain 226 Commerce Street Suite

More information