PA 500/1100V Ultra Quiet Ventilation Fan

Transcription

1 SPECIFICATION SHEET PA 500/1100V Ultra Quiet Ventilation Fan Description Ultra quiet ventilation fan with high efficiency, capacitor start motor, Energy Star and HVI 2100 certified. The PA series is UL listed and conforms fully to UL 507 safety standards. The PA series is UL listed for installation above bath or shower enclosures with GFCI protected circuit breaker. Suited for use in bathrooms, spa s, laundry rooms, and other damp locations. Housing Made of rugged 26 GA post-painted steel for superior corrosion resistance. Integral 4 steel duct adapter with noiseless aluminum back draft damper. Twin bar-hanger mounting brackets adjust from 13-3/4 to 25 inches for ideal positioning between ceiling members. Housing Dimensions: Width 9-1/16, Length 9-1/16, Height 7-5/8 and fits level with 2 x 8 joist construction. IC Rated for direct contact with insulation up to R40. Can be mounted in sloped ceilings up to pitch (45 degrees). Blower motor High efficiency, split capacitor, permanently lubricated motor with quick disconnect plug for easy change out. UL listed and Energy Star certified for continuous operation with built in overload protection to insure longer motor life: 120 Volts / 60 Hz. One-piece blower and motor assembly can be easily removed and replaced from below the ceiling. Four (4) isolation dampeners provide ultra quiet operation with minimal vibration transfer. Grille Attractive, low profile, high impact grille made with premium UV inhibited polymer resin. Powerful torsion springs seat the grille tightly and evenly to the ceiling surface. Grille can be attached or removed without the use of tools. Grille dimensions: 12-1/16 x 12-1/16 square. 24 bar hangers included, mount in sloped ceilings up to 12/12 pitch CFM SONES.3 TO 1.3 HEIGHT 7-5/8" DUCT 4" PA Series Very Quiet: as low as.3 sones 7-5/8 Height, ideal for 2x8 const. 120 volt / 60 Hz Painted housing Adjustable bar hangers duct adapter included High efficiency no lube motor UL listed Energy Star approved HVI 2100 certified Title 24 Ready Conforms to UL standard 507 IC Rated up to R40 insulation 7-5/8

2 PA 500/1100V Ultra Quiet Ventilation Fan EXPAMPLE ONLY NEED CORRECT SHEET FOR SE 80 Model Number PA500V PA700V PA900V PA1100V Static Pressure in inches w.g Air Volume (CFM) Noise (Sones) 4" Duct 0.3 n/a 0.4 n/a 0.7 n/a 1.3 n/a Fan Watts Power (Volts / Hertz) 120v 60hz 120v 60hz 120v 60hz 120v 60hz

3 SPECIFICATION SHEET SE Ultra Quiet Ventilation Fan Description Ultra quiet ventilation fan, premium efficiency, capacitor start motor, Energy Star and HVI 2100 certified. ETL listed and conforms to UL 507 safety standards. ETL listed for installation above bath or shower with GFCI protected circuit breaker. Suited for use in bathrooms, spa s, laundry rooms, and other damp locations. Housing Made of rugged 26 GA galvanized steel for superior corrosion resistance. Detachable 4 and 6 polymer duct adapter with noiseless back draft damper included. Twin bar-hanger mounting brackets adjust from 13-3/4 to 25 inches for ideal positioning between ceiling members. Housing Dimensions: Width 10-1/2, Length 11-3/8, Height 7-5/8 and fits level with 2 x 8 joist construction. IC Rated for direct contact with insulation up to R40. Integral four (4) point mounting bracket allows housing to be attached directly to ceiling joist without the use of bar-hangers. Can be mounted in sloped ceilings up to pitch (45 degrees). Blower motor High efficiency, split capacitor, permanently lubricated motor with quick disconnect plug for easy change out. Energy Star certified and engineered for continuous operation with built in overload protection to insure longer motor life: 120 Volts / 60 Hz. One-piece blower and motor assembly can be easily removed and replaced from below the ceiling. Four (4) isolation dampeners on motor mount bracket provide ultra quiet operation with minimal vibration transfer. Grille Attractive, low profile, high impact grille made with premium UV inhibited polymer resin. Powerful torsion springs seat the grille tightly and evenly to the ceiling surface. Grille can be attached or removed without the use of tools. Grille dimensions: 13-3/4 X bar hangers included. Mounts in sloped ceilings up to 12/12 pitch (45 degrees). CFM SONES.3 TO 1.1 HEIGHT 7-5/8" DUCT 4" & 6" SE Series Very Quiet: as low as.3 sones 7-5/8 Height, ideal for 2x8 const. 120 volt / 60 Hz Galvanized housing Adjustable bar hangers & 6 duct adapters included Integral direct mounting bracket High efficiency no lube motor ETL listed Energy Star approved HVI 2100 certified Title 24 Ready Conforms to UL standard 507 IC Rated up to R40 insulation Housing can be installed using the universal mounting bracket without the use of bar hangers.

4 SE Ultra Quiet Ventilation Fan EXPAMPLE ONLY NEED CORRECT SHEET FOR SE 80 Model Number SE 80 SE 90 SE110 SE120 SE140 Static Pressure in 1 w.g Air Volume (CFM) Noise (Sones) 6" Duct 0.3 s n/a 0.3 n/a 0.6 n/a 0.8 n/a 1.1 n/a Noise (Sones) 4" Duct 0.8 s n/a 0.7 n/a 1.2 n/a 1.2 n/a n/a n/a Fan Watts 25 w 25 w 28 w 28 w 35 w 35 w 39 w 39 w 43 w 43 w Q = 6 duct

5 SPECIFICATION SHEET SE Quiet Fan with Humidity Sensor Description Ultra quiet ventilation fan with adjustable humidity sensor. High efficiency, capacitor start motor with Energy Star and HVI 2100 certifications. ETL listed and conforms to UL 507 safety standards. ETL listed for installation above bath or shower with GFCI protected circuit breaker. Suited for use in bathrooms, spa s, laundry rooms, and other damp locations. Housing Made of rugged 26 GA galvanized steel for superior corrosion resistance. Detachable 4 and 6 polymer duct adapter with noiseless back draft damper. Twin bar-hanger mounting brackets adjust from 13-3/4 to 25 inches for ideal positioning between ceiling members. Housing Dimensions: Width 10-1/2, Length 11-3/8, Height 7-5/8 and fits level with 2 x 8 joist construction. IC Rated for direct contact with insulation up to R40. Integral four (4) point mounting bracket allows housing to be attached directly to ceiling joist without the use of bar-hangers. Can be mounted in sloped ceilings up to pitch (45 degrees). Blower motor & Humidity Sensor High efficiency, split capacitor, permanently lubricated motor with quick disconnect plug for easy change out. Energy Star certified and engineered for continuous operation with built in overload protection to insure longer motor life: 120 Volts / 60 Hz. One-piece blower and motor assembly can be easily removed and replaced from below the ceiling. Four (4) isolation dampeners provide ultra quiet operation with minimal vibration transfer. Integral humidity sensor is adjustable from 50 to 100% relative humidity and is factory preset at 75%. The timer is adjustable from 5 to 60 minutes. Grille Attractive, low profile, high impact grille made with premium UV inhibited polymer resin. Powerful torsion springs seat the grille tightly and evenly to the ceiling surface. Grille can be attached or removed without the use of tools. Grille dimensions: 13-3/4 X bar hangers included, mount in sloped ceilings up to 12/12 pitch CFM 90 / 110 SONES.3 TO.6 HEIGHT 7-5/8" DUCT 4" & 6" SE-H Series Very Quiet: as low as.3 sones Fully adjustable humidity sensor 7-5/8 Height, ideal for 2x8 const. 120 volt / 60 Hz Galvanized Housing Adjustable bar hangers & 6 duct adapters included Integral direct mounting bracket High efficiency no lube motor ETL listed / Title 24 Ready Energy Star approved HVI 2100 certified Conforms to UL standard 507 IC Rated up to R40 insulation Housing can be installed using the universal mounting bracket without the use of bar hangers.

6 SE Quiet Fan with Humidity Sensor EXPAMPLE ONLY NEED CORRECT SHEET FOR SE 80 Model Number SE90H SE110H Static Pressure in inches w.g Air Volume (CFM) Noise (Sones) 6" Duct 0.3 n/a 0.6 n/a Noise (Sones) 4" Duct 0.7 n/a 1.2 n/a Fan Watts 28 w 28 w 35 w 35 w Power (Volts / Hertz) 120v 60hz 120v 60hz 120v 60hz 120v 60hz