30 radiators from one central point. Simply smarter heating. living.danfoss.com. living by Danfoss heating control

Transcription

1 living by Danfoss heating control Simply smarter heating Giving your customers the ultimate integrated heating experience has never been easier. With Danfoss Link each individual element, from floor heating control to electronic radiator thermostats, has been meticulously engineered to function as one seamless system making it as easy to love as it is to work with. living by Danfoss simply is smarter heating. Link up to 30 radiators from one central point. living.danfoss.com

2 living by Danfoss The logical next step Multi-application solution Danfoss Link CC can control living connect radiator thermostats, floor heating both electrical and hydronic and the on/off switches in a house. And with the Danfoss Link App you can control it all from anywhere. Individual solution living eco is a stand-alone intelligent and user-friendly thermostat. Set according to your customer s needs, it s the most cost-effective way to control energy use and save heat. Classic solution living design is a traditional, self-acting radiator thermostat with a contemporary design. It looks good in every room, while operating at maximum efficiency. 2

3 Installation Done Installing a fully intelligent heating system has never been this easy. Because all Danfoss Link components have been developed and fine-tuned to work perfectly together, installing and commissioning the Danfoss Link CC panel is as simple as it can be. And when you ve done that, our video guide and Helpdesk are ready and waiting to help your customers set up wifi and app control. Simple. Easy. Done. 3

4 Danfoss Link The multi-application solution From a single location, Danfoss Link wirelessly regulates heating throughout the house perfect for customers who value the ultimate in convenience and modern technology. All system components are fully compatible and home heating can be remotely controlled through the Danfoss Link App. This includes living connect radiator thermostats as well as electric or hydronic floor heating systems. Simple installation Danfoss Link CC is easy to install using either a PSU (in-wall power supply) or an NSU (net supply). Two-way wireless technology means that there is no need for either a PC or a cable to link components. Large, intuitive icons and easily readable texts guide you through the programming process and make installation a breeze. Programmed energy savings The Danfoss Link CC Central Controller is far more than just a heating system manager. It is also an extremely powerful heat optimization controller. Complete weekly schedules can be programmed with the desired temperature settings using the factory setting. This enables perfect individualization and immediate energy and cost savings. Easy system expansion Danfoss Link is also designed for effortless future expansion. This is ideal when additional components need to be integrated into the system. For example, thermostats in other rooms or extra applications such as outdoor lighting control. Central controller Danfoss Link CC Danfoss Link App Control heating from one central point Group rooms in a Living Zone Simple user interface Color touchscreen Weekly heating schedule Manual schedule option At home and Vacation modes Pause heating mode Wi-Fi to connect to home network Integrated help function Personalized settings Quick heating regulation functions Control heating from anywhere Includes heating control functionality from Danfoss Link CC Simple and intuitive user interface Full home status at a glance High level of data security Available for Android and ios Important: The Danfoss Link App requires access to homeowners Wi-Fi network. 4

5 One job One system Intelligent energy efficiency and full heating system control all at the touch of a smartphone. living by Danfoss is the ultimate heating system experience. Simple to use and beautiful to look at. And with one completely integrated system, recommending, installing and servicing the perfect solution will be just as simple for you. 5

6 Danfoss Link and radiator heating System elements The Danfoss Link CC Central Controller electronically controls the living connect radiator thermostats. Communication between the central controller and the thermostats is based on the latest wireless technology. Full compatibility Fitted with two AA alkaline batteries, the living connect radiator thermostats fit Danfoss RA, RAV, RAVL and RTD valve housings as well as valve housings with M30x1.5 and M28 connectors. Cost-saving comfort heating Reduced heating costs and high comfort levels in one. A radiator heating system controlled by the Danfoss Link CC controller with living connect radiator thermostats provides all available options. Programming a weekly schedule with day and night setback and the corresponding temperature settings, allows the system to be effortlessly adapted to the rhythms of life. Another energy-saving feature is the vacation function. This sets the thermostat to a reduced temperature while the user is on vacation and automatically reverts to the desired temperature at the expected time of return. Based on the results of independent studies, replacing old thermostats with the living connect radiator thermostats in combination with the Danfoss Link CC Central Controller achieves up to 23% energy savings. Visit the case stories section at living.danfoss.com to see how different families achieved energy savings with living by Danfoss. Radiator thermostat living connect Pause heating Valve exercise function PID control Battery lifetime up to two years Warnings: low battery and no signal Variable setback in steps of 0.5 C Max./min. limitation Child lock Open-window detection Backlit display Not suitable for return valves living connect is the world s first electronic radiator thermostat to achieve eu.bac certification.

7 Danfoss Link and hydronic floor heating A floor heating system controlled via the Danfoss Link CC Central Controller offers optimum reliability and functionality. It is also simple to install and operate. System elements Danfoss Link CC Central Controller for wireless control of the floor heating Danfoss Link HC Hydronic Controller can communicate with up to 10 room thermostats. With up to three Danfoss Link HC hydronic controllers per system, one Danfoss Link CC can control as many as 30 room thermostats Danfoss Link RS Room Sensor for precise measurement and setting of temperature values in each room One supplier total functionality Both systems floor and radiator heating are controlled by the central Danfoss Link CC unit. This works smoothly because all elements speak the same language and work together to save energy. Simple and secure installation Two-way communication makes it possible to instantly check the status of the wireless connection to the thermostats. This offers high level of security during installation. Hydronic controller Danfoss Link HC Room temperature sensor Danfoss Link RS Wireless two-way communication, 868 MHz 24V short-circuit protected outputs with LED Actuator outputs for various cable connections Easy wiring with stress relief and cable retainers Control PWM (pulse width modulation) Automatic self-diagnostic function with error message Switching relay for pump and boiler control Input (on/off ) for heating/cooling High flexibility free positioning and easy repositioning of room thermostats Backlit display (during operation) Built-in sensor for measuring room temperature Display of set and actual temperature Timeless modern design 2 x AA batteries Battery life up to 2 years Warnings: low battery and no signal 7

8 Danfoss Link and electric floor heating Danfoss Link CC is the perfect solution for the control of electric floor heating or floor thermal regulation system. All heating elements are designed to be networked into a complete system, with two-way wireless communication. System elements Danfoss Link CC Central Controller for the wireless control of electric floor heating Danfoss Link FT Floor Thermostat for floor electric heating switches the heating on and off. Optionally equipped with a sensor to easily and accurately measure floor temperature. The thermostat has a signal amplifier function for heaters installed some distance away from the central controller Danfoss Link RS Room Sensor for precise measurement and setting of room temperature values Perfect comfort heating Electric underfloor heat mats are often used as additional heating to radiators or, outside the main heating season, as the sole heat source. The system is very responsive and ensures pleasant ambient temperatures at any time of the day. Room temperature sensor Danfoss Link RS Floor thermostat Danfoss Link FT High flexibility through free positioning Backlit display Built-in sensor for temperature measurement Display of set and actual temperature Timeless modern design 2 x AA batteries Battery life up to 2 years Warnings: low battery and no signal On/off switch Wireless connection to the Danfoss Link CC Central Controller Floor sensor 15A switching load, 4A inductive load 8

9 Danfoss Link and electrical appliances Even electrical appliances can be integrated into an overall system via the central controller. The end-users simply decide how they want to use the relay. Anything is possible, from an aquarium to outdoor lighting installations. Danfoss Link PR plug-in relay for electric on/off control Danfoss offers a complete portfolio for special requests, allowing many electrical installations to be integrated into and controlled by the network. One handy Danfoss accessory is the plug socket relay for easy connection of electrical devices. It is activated and timed via an on/off switch at the Danfoss Link CC Central Controller. Danfoss Link HR hidden relay for electric on/off control Communicates invisibly with Danfoss Link CC. Repeater unit Danfoss Link RU Hidden relay Danfoss Link HR Plug-in relay Danfoss Link PR Link CC Link RU Link RU Link RU living connect Using repeater units, the radio range between the central controller and the installations can be expanded. This may be necessary because of a weak radio link caused by widely spread installations, large distances, metal objects, special structural conditions, etc. 9

10 living eco The individual solution Programmable radiator thermostats living eco thermostats combine excellent timing control and intelligent heating control. They are user-friendly and can be set according to your customer s exact needs. Vacation function To save energy, living eco incorporates a vacation function. The user sets the thermostat to reduce the temperature while they are away and then automatically revert to the desired temperature when they expect to return. Compatibility living eco runs on two AA alkaline batteries. It is compatible with all Danfoss thermostatic valves as well as non-danfoss valves type RA, RAV, RAVL, RDT, K (M30 x 1.5) and M28 (MMA, Herz, Orkli, Comap). Two pre-installed saving programs Vacation function Frost protection (Pause heating) Valve exercise function PID control Battery lifetime up to two years Visual warning of low battery Variable setback in steps of 0.5 C Max./min. limitation Child lock Open-window detection Backlit display At home and choice quick/ moderate regulation mode Not for return valves Pre-installed programs living eco has been designed for ease of use and energy efficiency. For the installer, it is simple to set up. For the user, it includes pre-installed saving programs P1 and P2. 22:30 Night temperature: 17 C P0 Constant temperature, 24 hours a day 06:00 Day temperature: 21 C P1 21 C from 06:00 22:30 17 C from 22:30 06:00 P2 21 C from 06:00 08:00 17 C from 08:00 16:00 (working days only) 21 C from 16:00 22:30 17 C from 22:30 06:00 10

11 living design The classic solution living design thermostats Self-acting standard thermostat with a contemporary design. Self-acting sensor Liquid-filled sensor Built-in sensor Frost protection Positive shut-off function 0 Black Inox White Chrome living design is suitable for all radiators including towel rails and designer units even those with unusual surfaces. The living design RAX-K version works with valves with M30x1,5 connection from other manufacturers. Its smooth surface is aslo easy to disinfect, which is especially important in environments where hygiene is paramount. 11

12 Proven expertise that simply works With more than 80 years experince as supplier of complete systems, we engineer every single component and product ourselves. This enables us to supply you with a fully integrated system, in perfect balance. It simply works. Why settle for less? living.danfoss.com Danfoss A/S Heating Solutions Haarupvaenget 11 DK-8600 Silkeborg Telephone: heating@danfoss.com heating.danfoss.com Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved. VB.FN.J5.02 Copyright Danfoss Heating Solutions Pravda.dk Jan2015