ICB Twin SH, ICB SH, ICBA SH

Transcription

1 ICB Twin SH, ICB SH, ICBA SH ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX SPRINGFIELD, ILLINOIS 608- PHONE: () FAX: () B 09/ 06 Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: ) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh servers (mechanical and digital) year parts and year labor. ) All other equipment - years parts and year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for years. b) Compressors on refrigeration equipment - 5 years parts and year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for years or 0,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer ) giving BUNN prompt notice of any claim to be made under this warranty by telephone at () or by writing to Post Office Box, Springfield, Illinois 608-; ) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and ) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX- PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either ) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or ) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. 9, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew- WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, imix, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta brewer housing configuration is a trademark of Bunn-O-Matic Corporation. 56 0

3 TABLE OF CONTENTS HOOD ASSEMBLIES... TRUNKS...6 BASES...8 TANK AND COMPONENTS... 0 TANK FILL/DRAIN... DISPENSE/BYPASS VALVES & SPRAYHEAD... FAUCET...6 ELECTRICAL AND OPERATING CONTROLS... 8 FUNNELS... NUMERICAL INDEX... 6 To order coffee filters, water filters, or other accessories, refer to Specification Sheets at ICB SH...0/08-0V ICBA... 0V ICB Twin SH...0/08-0V Fraction Decimal Fraction Decimal / / / / / / / 0.50 / /6 0. /6 0.8 /8 0.5 / / / /

4 HOOD ASSEMBLIES ICB SH Series WARNING To reduce the risk of electric shock, do not remove or open cover. No user-serviceable parts inside. Authorized service personnel only. Disconnect power before servicing. 5 6 WARNING To reduce the risk of electric shock, do not remove or open cover. No user-serviceable parts inside. Authorized service personnel only. Disconnect power before servicing. 5 P

5 HOOD ASSEMBLIES ITEM PART NO. QTY. QTY. DESCRIPTION TWIN SINGLE Hood, SST Hood, SST Hood, BLK Screw, Pan Head #8- x Cover, Top Includes items & Cover, Top Screw, Truss Head BLK #6- x.5 Lkg Decal, No Serviceable Parts Shield, Insulator Shield, Insulator Bracket, Tank Support, Twin (Upper) Screw, Truss Head #6- x.5 Lkg Bracket, Tank Support, Single Screw, Truss Head #8- x.5 Lkg Edging * - Gasket, U-channel.0 (Order item 8) Gasket, U-channel 8.0 (Cut to required length)

6 TRUNKS ICB SH Series 8 8 WARNING To reduce the risk of electric shock, do not remove or open cover. No user-serviceable parts inside. Authorized service personnel only. Disconnect power before servicing WARNING To reduce the risk of electric shock, do not remove or open cover. No user-serviceable parts inside. Authorized service personnel only. Disconnect power before servicing P

7 TRUNKS ITEM PART NO. QTY. QTY. DESCRIPTION TWIN SINGLE Trunk Trunk, SST Includes items & Trunk, BLK Screw #8- x Base Housing Base Housing SST Base Housing BLK Panel, Front Panel, Front Includes items - 6, & Screw, Truss Head, Locking #8- x Screw, Truss Head #8- x Decal, Warning-Decanter/Funnel Decal, Warning Overlay Graphic Decal, No User Serviceable Parts Decal, Compliance To Plumbing Code Decal, Warning-Electrical Schematic, Electrical Schematic, Electrical, 0V Schematic, Electrical, 0V 56 0

8 BASES ICB SH Series P

9 BASES ITEM PART NO. QTY. QTY. DESCRIPTION TWIN SINGLE Base, Standard Single Base, Standard Twin, SST Base, Standard Twin, BLK Leg Pad, Anti Skid Lower Tank Support (Std. Twin) Screw #8- x Server Platform Server Platform Screw #8- x Server Guide Screw #8- x Washer, Rubber Sealing Circuit Breaker, amp Receptacle Assembly, Spring Contact (Includes items 8, 9 & 0) Screw, Flat Head #6- x.5" Housing, Spring Contact Spring Pin, Contact Washer, Flat Nut, Keps #6- - Zinc Pl

10 TANK AND COMPONENTS ICB SH Series P

11 TANK AND COMPONENTS ITEM PART NO. QTY. QTY. DESCRIPTION TWIN SINGLE Tank, Twin Tank, Single Nut, Keps # Nut, # Flat Washer Lockwasher, Ext. Tooth #8 Ground circuit for liquid level probe - Singles Thermostat, Limit Tank Lid, Twin (New Style, left vent only) Tank Lid, Single Nut, # Lockwasher, Ext. Tooth #8 Ground circuit for liquid level probe - Twins Gasket, Twin Tank Lid (Squared) Gasket, Single Tank Lid Probe Kit, Liquid Level Flat Washer Lockwasher, Int. Tooth # Nut, #8- Included in kit Grommet, Liquid Level Probe Probe, Temperature Sensor 0.5" Grommet, Temperature Sensor Fitting, 90 Silicone Tank Heater 68W, 0V (Includes item ) Single Tank Heater 000W, 0V (Includes item ) Twin Tank Heater 000W, 08V (Includes item ) Twin Gasket, Tank Heater Nut, Brass.5" Tank Heater 680W, 0V (Includes item ) Single Tank Heater 500W, 0V (Includes item ) Single The following items are not illustrated Thermal Fuse (CE Only) Insulation, Tank _ Insulation, Tank

12 TANK FILL/DRAIN ICB SH Series To bottom of tank P

13 TANK FILL/DRAIN ITEM PART NO. QTY. QTY. DESCRIPTION TWIN SINGLE.000 Clamp, Hose-Snap SNP # Clamp Valve, Water Inlet 0V Valve, Water Inlet 0V Screw, Pan Head M x 6MM Kit, Valve Rebuild Strainer, Inlet 9.00 Elbow,.5 Flare x.5 FGHT * Tube, Silicone.5 ID x 9.0 (order item 0) * Tube, Silicone.5 ID x.0 (order item 0) Connector, Union Check Valve Kit, Check Valve (Includes 6-8) The following items are not illustrated Tube, Silicone.5" ID x.0 (Use as required) Tube, Silicone.5" ID x 6.0 (Use as required) Tube, Silicone.5" ID x 0.0 (Use as required) 56 0

14 DISPENSE/BYPASS VALVES & SPRAYHEAD ICB SH Series 5 To top of tank To top of tank P

15 DISPENSE/BYPASS VALVES & SPRAYHEAD ITEM PART NO. QTY. QTY. DESCRIPTION TWIN SINGLE Valve, Bypass 0V Valve, Bypass 0V Nut, KEPS # Clamp, Hose-Snap SNP # Clamp, Hose-Snap SNP # * - Tube.50 ID x 8.5 (Vent) * - Tube.50 ID x 9.5 (Vent) Order Item Elbow Fitting, By-Pass Restrictor Nut, Hex Back, Sprayhead Seal Sprayhead Assy, hole (Includes items 8 & 9) * Tube.50 ID x.0 (Order item ) Valve Assembly, Sprayhead 0V Valve Assembly, Sprayhead 0V Fitting,.5 NPTF.55OD/.8ID Fitting,.5 NPTF.55OD/.55ID 59.00* - Tube.50 ID x.85 (Brew) * - Tube.50 ID x 6.5 (Brew) * - Tube.50 ID x.6 (Tank to Bypass) (Left) * - Tube.50 ID x 5.5 (Tank to Bypass) (Right) * - Tube.50 ID x.0 (Tank to Bypass) Order Item * - Tube.50 ID x 8.5 (Bypass to Elbow) Left * - Tube.50 ID x.0 (Bypass to Elbow) Right 59.00* - Tube.50 ID x 6.5 (Bypass to Elbow) The following items are not illustrated Tube.50" ID x Foot (Use as required) Tube.50" ID x Feet (Use as required) Tube.50 ID x 0 Feet (Use as required) Tube.50 ID x 50 Feet (Use as required)

16 FAUCET ICB SH Series P

17 FAUCET ITEM PART NO. QTY. QTY. DESCRIPTION TWIN SINGLE Clamp, Hose-Snap SNP # Clamp, Hose-Snap SNP # Elbow 59.00* - Tube.50 ID x.80 (Order item ) * - Tube.8 ID x 6.0 Faucet (Order item ) 59.00* - Tube.50 ID x.0 Faucet (Order item ) Plate Grommet Spacer Bracket Nut Lockwasher Screw Spacer Nut Washer,.50 ID x.5 OD Nut Cover Screw Faucet Assy (Includes items 5-0) Body Bonnet Stem Seat Cup Spring Handle, Red Badge The following items are not illustrated Tube, Silicone.5 ID x.0 (Use as required) Tube, Silicone.5 ID x 6.0 (Use as required) Tube, Silicone.5 ID x 0.0 (Use as required) Tube.50 ID x Foot (Use as required) Tube.50 ID x Feet (Use as required) Tube.50 ID x 0 Feet (Use as required) Tube.50 ID x 50 Feet (Use as required)

18 A B I O C A B I O C ELECTRICAL AND OPERATING CONTROLS ICB SH Series ENABLE ENABLE 9 P

19 ELECTRICAL AND OPERATING CONTROLS ITEM PART NO. QTY. QTY. DESCRIPTION TWIN SINGLE Membrane Switch Membrane Switch Sensing Coil Fastener USB Receptacle Control Board 0V Control Board 0V Screw, Pan Head #8- x Bracket Bracket Nut, Keps # Screw, Pan Head #8- x Bezel Bezel Seal Seal Seal Transformer 0V Transformer 0V Screw SST #6- x Terminal Block 0V Terminal Block 0V Screw, Truss Head #8- x.50" Bracket Bracket Screw SST #6- x Screw, Truss Head #6- x Screw, Grounding #8- x.50" Decal, Ground Cord Connector 0V Cord Connector 0V EMI Filter (0V CE models only) Screw, Truss Head #6- x.8" Terminal Lug (0V CE models only) Screw, Pan Head #8- x.8" Decal, Equipotentiality (CE Only) Continued on next page

20 A B I O C A B I O C ELECTRICAL AND OPERATING CONTROLS ICB SH Series ENABLE ENABLE 9 P

21 ELECTRICAL AND OPERATING CONTROLS ITEM PART NO. QTY. QTY. DESCRIPTION TWIN SINGLE Power Cord 0V Power Cord 0V Switch, Rocker - Main On/Off Screw, Truss Head #6- x.5" Coil, Solenoid 0V Coil, Solenoid 00V Screw, Truss Head #8- x.5" Lockwasher, Split # Spring Retaining Ring Guide, Pin Bracket Solenoid Assembly 0V (Includes -5) Solenoid Assembly 0V (Includes -5) Nut, Keps # Switch, Toggle 0V Switch, Toggle 0V Facenut Bracket, Switch I/O Fastener, Snap Plug (Early Models) Plug (Late Models) Heatsink Screw, 6- x Triac 0V Triac 0V Screw, 6- x Lock Washer M Heat Sink Compound, 5oz Tube Circuit Board, Comm Nut Spacer Decal, Terminal Block 0V Decal, Terminal Block 0V Power Supply 0V Power Supply 0V Screw * - Gasket, U-channel,.0 (Order item 6) Continued on next page

22 A B I O C A B I O C ELECTRICAL AND OPERATING CONTROLS ICB SH Series ENABLE ENABLE 9 P

23 ELECTRICAL AND OPERATING CONTROLS ITEM PART NO. QTY. QTY. DESCRIPTION TWIN SINGLE The following items are not illustrated Wiring Harness, Main 0V Wiring Harness, Main Wiring Harness, Main 0V Wiring Harness, Liquid Level 0V Wiring Harness, Liquid Level Wiring Harness, Liquid Level 0V Wiring Harness, Sensing Coil (Left & Single) Wiring Harness, Sensing Coil (Right Side Only) Wiring Harness, EMI Filter (0V CE models only) Lead Assembly, Circuit Breaker Lead Assembly, Main Switch to Triacs) Thermal Fuze (0V CE models only) Wiring Harness, x-former to CBA Wiring Harness, SH Comm Board 0V Wiring Harness, SH Comm Board 0V Gasket, U-channel 8.0 (Use as required)

24 FUNNELS ICB SH Series P

25 FUNNELS ITEM PART NO. QTY. QTY. DESCRIPTION TWIN SINGLE Funnel Assy, Plastic (Includes Items thru ) Decal, Caution-Remove Funnel Decal, Caution-Hot Liquid Splash Guard Insert, Funnel Handle

26 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , ,5, , , ,,9, , , , , , , , , , , , , , M