Your Equipment Manufacturer for Material Processing. Leading The Industry In Thermal Desorption Technology SOIL REMEDIATION

Size: px

Start display at page:

Download "Your Equipment Manufacturer for Material Processing. Leading The Industry In Thermal Desorption Technology SOIL REMEDIATION"

Oswald McCoy
6 years ago
Views:

recovery SYSTEMs Leading The Industry In

Indirect Thermal Desorption Unit with Vapor

Thermal Desorption Unit with Vapor Recovery

1 THERMAL REMEDIATION SOIL REMEDIATION DRILLING MUDS DRILL CUTTINGS Pyrolysis recovery SYSTEMs Leading The Industry In Thermal Desorption Technology Vulcan 70 Indirect Thermal Desorption Unit with Vapor Recovery Vulcan Indirect Fire Holo-Flite Thermal Desorption Unit with Vapor Recovery Unit Vulcan Direct Fired Mobile Soil Reclamation Unit Vulcan Indirect Heated Rotary Kiln with Vapor Recovery Unit Your Equipment Manufacturer for Material Processing For more information on our custom-built systems, please visit:

2 SYSTEMs 1414 Riley Industrial Dr., Moberly, MO Phone: Vulcan Systems is the global leader in the environmental remediation, thermal drying and calcining industries, specializing in the processing and recovery of a variety of materials, including frac sand, automotive shredder residue, bone meal, drilling muds and iron ore. Our indirect fired rotary kilns, electrically heated units and hot oil processors are currently being used in numerous remediation and recovery projects worldwide. Vulcan Systems are able to capture waste energy and convert waste materials to beneficial use, helping to reduce your company s disposal costs and environmental footprint. Our experienced and highly-qualified team can design and manufacture a system to fit your specifications and will provide set-up, commissioning, training and maintenance support services over the lifetime of your project. Visit our website to view videos, case studies and information on drying, calcining and thermal desorption processes and applications. Our knowledgeable staff will answer any questions you may have and will provide you with a variety of services in the design of your system, including drafting, mass and energy balance, ASPEN simulation, project management, engineering and repair and preventative maintenance. From agriculture to mining to the oil and gas industry, Vulcan Systems can design a solution for almost any material or application. Let us develop a turnkey solution and manufacture the ideal system to meet your processing needs. MORE INFORMATION: visit

VULCAN Direct Fired Mobile Soil Reclamation Unit This

unit consisting of: Feed system Counter flow rotary

Baghouse Thermal oxidizer with 25 MMBtu burner and 2.

petroleum contaminants and completely oxidizes them in

This advanced technology and mobility allows the Vulcan

of complexity and soil types in different types of

The Vulcan provides a cost effective, permanent

The unit is highly mobile and quickly set up.

3 VULCAN Direct Fired Mobile Soil Reclamation Unit This is a single trailer, direct fired thermal desorption unit consisting of: Feed system Counter flow rotary dryer with 25 MMBtu burner Soil discharge with quench Baghouse Thermal oxidizer with 25 MMBtu burner and 2.5 sec residence time Unit thermally evaporates petroleum contaminants and completely oxidizes them in an afterburner. This advanced technology and mobility allows the Vulcan to adapt to small or large projects of varying degrees of complexity and soil types in different types of weather. The Vulcan provides a cost effective, permanent solution to cleaning contaminated soil. The unit is highly mobile and quickly set up. Permitted to meet EPA and state standards tons per hour Soil remediation, drill cuttings, drilling muds, etc. Where HAVE THEY GONE? Serbia, Finland, Mexico, Canada, Nigeria and Aleutian Islands

VULCan 70 Indirect Thermal Desorption Unit

indirect fired rotary thermal desorption

unit operates at temperatures of up to 950

oxidized, and the heat generated from this

hydrocarbons from contaminated waste and

4 VULCan 70 Indirect Thermal Desorption Unit with Vapor Recovery 70 long x 7 ID indirect fired rotary thermal desorption unit with vapor recovery consisting of: Quench scrubber system Chiller and heat exchanger Knock-out pot Thermal oxidizer (also used as waste gas burner to supplement main burner to reduce fuel consumption of main unit) Oil water separator The primary thermal desorption unit operates at temperatures of up to 950 F in an oxygen deficient environment. Cleaned solids are discharged from the system through a water cooled screw auger and vapors are drawn through the vapor recovery unit where hydrocarbons are condensed and recovered. Lighter, non-condensable hydrocarbons are oxidized, and the heat generated from this process is reused to heat the plant, reducing the fuel consumption tons per hour Removing VOCs and hydrocarbons from contaminated waste and soil Where did it go? Brazil, to a general waste facility for one of the largest environmental and waste treatment companies in the country

VULCAN HOLO-FLITE THERMAL DESORPTION UNIT WITH VAPOR

MMBtu hot oil boiler and Metso four screw Holo-Flite

The vapor recovery unit consists of: Quench scrubber

Thermal oxidizer Oil water separator The system is

in both the screws and outer shell of system.

Hot oil heater comes complete with high temp shutoff

water are condensed and removed from vapor steam.

$The refractory lined thermal oxidizer is rated at$

5 VULCAN HOLO-FLITE THERMAL DESORPTION UNIT WITH VAPOR RECOVERY UNIT Hot oil processor consisting of a 10 MMBtu hot oil boiler and Metso four screw Holo-Flite dryer with vapor hood, feed and discharge auger. The vapor recovery unit consists of: Quench scrubber system Chiller and heat exchanger Knock-out pot Thermal oxidizer Oil water separator The system is heated by high temp thermal oil, where heat transfers in both the screws and outer shell of system. The system operates at temperatures of up to 700 F. Hot oil heater comes complete with high temp shutoff valves, oil filter, inlet and return header and high temp rotary joints. The quench operates at 200 F and dust, light oil and water are condensed and removed from vapor steam. The quench scrubber has a vapor outlet, water/oil outlet and sludge sump with drain outlet. The refractory lined thermal oxidizer is rated at 2,000 F, with a 2 to 5 second residence time. 5-8 tons per hour Drill cuttings Where did it go? Nigeria

VULCAN Bethlehem Porcupine Portable Thermal Desorption System with VRU A Bethlehem Model 3018 18 x 30 Holo-Flite

Processor comes equipped with a Gencor Model SFG-600 Hot Oil Heater w/ Pump, 6 MMBtu/hr.

Trailer-mounted hot oil heater utilizes a Webster combination (gas or oil) burner to transfer heat to the thermal

The thermal fluid is circulated via a 20 hp pump through specialized turbo coils for maximum heat transfer.

6 VULCAN Bethlehem Porcupine Portable Thermal Desorption System with VRU A Bethlehem Model x 30 Holo-Flite processor with trapezoidal vapor dome. Processor comes equipped with a Gencor Model SFG-600 Hot Oil Heater w/ Pump, 6 MMBtu/hr. Hot Oil Heater with an expansion tank. Trailer-mounted hot oil heater utilizes a Webster combination (gas or oil) burner to transfer heat to the thermal fluid. Air is delivered by a 5 hp fan. The thermal fluid is circulated via a 20 hp pump through specialized turbo coils for maximum heat transfer. Baldor electric motors power pump and fan. Approximate overall dimensions are 6 diameter by 17 length. Vapor recovery system includes Universal Refrig eration chiller, Glycol chiller and condenser, vapor scrubber tank, heat exchanger, blower, dual-vapor phase carbon cells and control panel. Mounted on dual-axle trailers. 2-3 tons per hour Remediation and recycling of drill cuttings Where did it go? Nigeria

VULCAN 40 Indirect Thermal Desorption Unit with Vapor Recovery 40 long x 5

consisting of: Quench scrubber system Chiller and heat exchanger Knock-out

burner to reduce fuel consumption of main unit).

temperatures of up to 1,100 F in an oxygen deficient environment.

auger, and vapors are drawn through the vapor recovery unit where

Lighter, non-condensable hydrocarbons are oxidized, and the heat generated

7 VULCAN 40 Indirect Thermal Desorption Unit with Vapor Recovery 40 long x 5 ID indirect fired rotary thermal desorption unit with vapor recovery consisting of: Quench scrubber system Chiller and heat exchanger Knock-out pot Thermal oxidizer (also used as waste gas burner to supplement main burner to reduce fuel consumption of main unit). Oil water separator The primary thermal desorption unit operates at temperatures of up to 1,100 F in an oxygen deficient environment. Cleaned solids are discharged from the system through a water cooled screw auger, and vapors are drawn through the vapor recovery unit where hydrocarbons are condensed and recovered. Lighter, non-condensable hydrocarbons are oxidized, and the heat generated from this process is reused to heat the plant, reducing fuel consumption. 5-8 tons per hour Removing VOCs and hydrocarbons from contaminated waste and soil Where did it go? Nigeria

Vulcan Indirect Heated Rotary Kiln with Vapor Recovery Unit EQUIPMENT DESCRIPTION: 68 long x 6 diameter indirect heated kiln with vapor recovery unit consisting of: Quench Scrubber system Air-Cooled

zones that heat the drum up to 1,200 F in an oxygen deficient environment. Treated, dried materials are discharged to a water-cooled discharge auger.

8 Vulcan Indirect Heated Rotary Kiln with Vapor Recovery Unit EQUIPMENT DESCRIPTION: 68 long x 6 diameter indirect heated kiln with vapor recovery unit consisting of: Quench Scrubber system Air-Cooled Heat Exchanger Shell and Tube Heat Exchanger Refrigeration Plant Knock-Out Pot Oil/Water Separator Oxidizers PROCESS DESCRIPTION: The indirect fire rotary kiln has four independently controlled heat zones that heat the drum up to 1,200 F in an oxygen deficient environment. Treated, dried materials are discharged to a water-cooled discharge auger. Vapors are drawn through the vapor recovery unit where hydrocarbons are condensed and recovered. The lighter, non-condensable gases are oxidized, and the heat generated from this process is reused to heat the plant, reducing fuel consumption and overall operating cost. WHAT IS IT USED FOR? Removing hydrocarbons or other valuable organics from feed. Can be adjusted to suit specific processes. Ideal for thermal desorption, soil remediation, pyrolysis (tires, charcoal, activated carbon etc.), calcining, or drying projects.

THE INITIATES PLC (TIP)

THE INITIATES PLC (TIP) THERMALDESORPTION SERVICES THE INITIATES PLC TDU, Incinerator, Cleaning & Decontamination, E-waste Services Our Culture: Mission; vision; business core values OUR MISSION: To facilitate