English Nitrogen Kit Ref. KN-A

Size: px

Start display at page:

Download "English Nitrogen Kit Ref. KN-A"

Arthur Stokes
6 years ago
Views:

1 English Nitrogen Kit Ref. KN-A

0010207 Compressed Air Inlet or from N 2

..1 unit Ref. 0010207 Manual...1 unit Ref. 0013741 Stand Cable Ref.

2 Packing List The following items should be included: Features Nitrogen Flow Regulator...1 unit Ref. MN-A Stand...1 unit Ref. DN-SD Nitrogen Handle...1 unit Ref. T245-NA Control Unit Ref. DI, DD, DDR, DM Nitrogen Flow Regulator Ref. MN-A Nitrogen Generator Ref. GN-A N 2 pressure range supply 3 to 5 bar (6 bar max) Use Ø 6 ± 0.15 mm polyurethane tubing Module Cable Nozzles... 2 units Ref. B7243 (x1) B7244 (x1) Cartridge...1 unit Ref. C Tip Cleaner...1 unit Ref. CL9885 Sponge...1 unit Ref. S0354 Power Socket Ref Compressed Air Inlet or from N 2 net Stand Ref. DN-SD Handle N 2 tube Stand Cable...1 unit Ref Module Cable...1 unit Ref Manual...1 unit Ref Stand Cable Ref Nitrogen supply tube Electric line Nitrogen Handle Ref. T245-NA Nitrogen Kit Ref. KN-A 2 3

Adjustable Stand Tip Cleaner Improve thermal

It leaves a small layer of solder on the tip to

Keep the sponge damp with distilled water when

Splashguard It prevents splashing of solder

Also compatible with: sponge brushes Non-slip

the operator remove excess solder by gentle

3 Adjustable Stand Tip Cleaner Improve thermal transfer by cleaning the tip after each solder joint. Cable collector Keeps work area free of cable Brass wool Ref. CL6210 Very effective cleaning method. It leaves a small layer of solder on the tip to prevent oxidation between cleaning and rewetting. Sponge Ref. S0354 The least harmful cleaning method. Keep the sponge damp with distilled water when working to avoid tip wear. Splashguard It prevents splashing of solder particles. Also compatible with: sponge brushes Non-slip base No need to hold the base while cleaning tips. Wiper tray Ref. CL0236 A temperature resistant receptacle lets the operator remove excess solder by gentle tapping or wiping. It can be easily removed for cleaning. Tapping: Wiping: Maintenance: Adjustable tool holder Suits your work position Adjustable cable collector Tap to remove excess solder. Use the slots to remove remaining particles. It can be easily removed for cleaning. 4 5

Initial Set up Changing Cartridges Once the Nitrogen Flow Regulator (MN-A) is connected to the Control Unit, enter the Station Settings menu and enable the Nitrogen Mode.

Fixing Main menu Station settings Exit 1 Reset settings 2 Station settings 3 Tool settings 1 Temp unit Celsius 2 Maximum temp 400 0 C 3 Minimum temp 200 0 C 4 Nitrogen mode

Place the handle in the Place the handle on top of Use the holes for fixing the It guarantees minimal gas consumption and prevents tip oxidation.

The nitrogen flow is automatically activated when the soldering iron is lifted from the stand. B. For curved C210.

4 Initial Set up Changing Cartridges Once the Nitrogen Flow Regulator (MN-A) is connected to the Control Unit, enter the Station Settings menu and enable the Nitrogen Mode. Save time and change cartridges safely without switching the station off. 1. Removing 2. Inserting 3. Fixing Main menu Station settings Exit 1 Reset settings 2 Station settings 3 Tool settings 1 Temp unit Celsius 2 Maximum temp C 3 Minimum temp C 4 Nitrogen mode ON A B C D Operation The MN is an electrovalve controlled by the soldering station that allows you to solder using nitrogen. Place the handle in the Place the handle on top of Use the holes for fixing the It guarantees minimal gas consumption and prevents tip oxidation. extractor and pull to the new cartridge and press cartridge* as follows: remove the cartridge. down. A. For straight C210. The nitrogen flow is automatically activated when the soldering iron is lifted from the stand. B. For curved C210. It stops when the tool is placed back and the tip temperature drops to the sleep mode. C. For curved C245. D. For straight C245. Important: Before changing the cartridge *After changing the cartridge Recommended N 2 flow: 1-2 SLPM Nozzle Mark N 2 flow control Pull out the nozzle and loosen the cartridge to remove. Insert the cartridges as far as the mark for a proper connection and tighten the screw for the tool to function. 6 7

Compatible Cartridges Safety The T245-NA Nitrogen Handle works with C245 cartridges. Find the model that best suits your soldering needs in www.jbctools.

5 Compatible Cartridges Safety The T245-NA Nitrogen Handle works with C245 cartridges. Find the model that best suits your soldering needs in It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. - The power cord must be plugged into approved bases. Be sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire. Round Chisel Round bent Bevel - Do not work on electrically live parts. Maintenance Before carrying out maintenance or storage, always allow the equipment to cool. - Clean the station screen with a glass cleaner or a damp cloth. - The soldering tip, the stand and the metal part of the tool may still be hot even when the station is turned off. Handle with care. - Do not leave the appliance unattended when it is on. - Do not cover the ventilation grills. Heat can cause inflamable products to ignite. - Use a non residue classified flux and avoid contact with skin or eyes to prevent irritation. - Use a damp cloth to clean the casing, the stand and the tool. Alcohol can only be used to clean the metal parts. - Periodically check that the metal parts of the tool and stand are clean so that the station can detect the tool status. - Maintain tip surface clean and tinned prior to storage in order to avoid tip oxidation. Rusty and dirty surfaces reduce heat transfer to the solder joint. - Periodically check all cables and tubes. Clean periodically - Be careful with the fumes produced when soldering. - Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when working to avoid personal harm. - Utmost care must be taken with liquid tin waste which can cause burns. - This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved. Children must not play with the appliance. - Maintenance must not be carried out by children unless supervised. - Replace any defective or damaged pieces. Use original JBC spare parts only. - Repairs should only be performed by a JBC authorized technical service. 8 9

6 Exploded View Specifications - Weight: 3.5 Kg (7.8 lb) - Dimensions of the MN-A: 50 x 120 x 130 mm - N 2 pressure range supply: 3-5 bar - Maximum N 2 pressure: 6 bar - N 2 flow regulation: SLPM - Recommended N 2 flow: 1-2 SLPM - Ambient Operating Temperature: ºC ( ºF) Complies with CE standards ESD protected housing skin effect 10 11

7 Warranty JBC s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear due to use or mis-use. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. This product should not be thrown in the garbage. In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life must be collected and returned to an authorized recycling facility

Premium Desoldering station with Electric Pump

English Premium Desoldering station with Electric Pump Ref. DIS-D Packing List The following items should be included: DI Control Unit... 1 unit Ref. DI-1D (120V) DI-2D (230V) DI-9D (100V) Electric Desoldering