LV102L (Metal Levers)

Transcription

1 MEDA COLUMN SPOUT WIDESPREAD LAVATORY FAUCET Modern Bath Meda LV102L (Metal Levers) FEATURES Metal levers Fixed spout 3 x 1 3/8 hole cutouts 1/4-turn ceramic disc control cartridges Pop-up drain, 1 1/4 pipe Brass construction 1.2 GPM COLORS/FINISHES Polished Chrome Polished Nickel Satin Nickel WARRANTY Limited Lifetime Warranty 5 7/8" /4" 2 3/4 5 1/8 2 MAX 1 5/8" 1 1/8" G1/2" 1 27/32 3 1/2" Ø1 1/4" 7/16" 1 1/4" 1 27/32 2 1/8" 4 5 7/8" 2 3/8" 11" 7 7/8"

2 i LV102 WARNING: Please leave these instructions with the user. Do not discard them.

3 1

4 2 5 7/8" /4" 5 13/16 5 1/8 2 3/ /32 3 1/2" 4 max. 1 5/8" 1 1/8" Ø1 1/4" 2 1/8" G1/2" 5 7/8" 2 3/8" 7/16" 1 27/32 11" 1 1/4" 7 7/8"

5 3 OPERATING CONDITIONS - Minimum dynamic pressure PSI - Recommended operational pressure (static) PSI (ATTENTION: when pressure exceeds 70.0 PSI, we recommend the installation of a pressure reducer) - Maximum operational pressure (static) PSI - Maximum test pressure (static) PSI - Maximum hot water temperature F - Recommended hot water temperature F (for safety and energy saving) - Hot water connection... left - Cold water connection... right DATOS TÉCNICOS - Presión dinámica mínima PSI - Presión de trabajo recomendada (estática) PSI (Nota: para presiones superiores a los 70.0 PSI les recomendamos instalar un reductor de presión) - Presión máxima de trabajo (estática) PSI - Presión máxima de prueba (estática) PSI - Temperatura máxima agua caliente F - Temperatura aconsejada agua caliente F (para seguridad y ahorrar energía) - Conexión agua caliente... izquierda - Conexión agua fría... derecha HOT COLD

6 Not Included Tools 15/32 Included Parts H3x(2) H2x(2) N2x(2) H1x(2) N1x(2) B1 I1x(2) C1 G1 Red Stamp Hot Water G1 Blue Stamp Cold Water L1x(2) M1x(2) E3 D1 E1 E2 F1 F2 F3 F4 F5 E4 A1 A2 A3 A4 A5

7 5 INSTALLATION Flush hot and cold water lines before faucet installation. IMPORTANT! 2 1 Turn hot and cold water off to continue installation. 2 6

8 INSTALLATION 6 Thread on mounting bolt A1. A1 B1 A1 A1

9 7 INSTALLATION Thread in hot and cold water supply lines D1 by rotating lines by hand only. HOT COLD D1 D1 D1

10 INSTALLATION 8 Assemble the rod E1. E1 E1

11 9 INSTALLATION Install spout B1 into deck, fitting A5 washer and base C1. B1 C1 A5 1 5/8" MAX Ø 1 3/8" min Ø 1 1/2" max C1 A5

12 INSTALLATION 10 Secure spout to deck as shown. A2 A3 A4 A2 A3 A4

13 11 INSTALLATION Install the headvalve and secure to deck as shown. F1 F2 Min. 1 17/64" - Max 1 23/64" 1 5/8" Max F5 Min. Ø1 1/8" F3 F4 G1 G1 F1 F2 F3 F4 F5

14 INSTALLATION 12 Mount the handles as shown. H1 H2 H3 L1 I1 M1 G1 H3 H2 H1 I1 L1 M1 5/64

15 13 INSTALLATION Screw the connection N1 and the flexible hose D1 to the cross connection G1. N2 N1 D1 G1 Red Stamp Hot Water Blue Stamp Cold Water N1 N2 15/32

16 INSTALLATION 14 Install the automatic pop-up as shown. E3 E4 E4 E3

17 15 INSTALLATION Connect the automatic pop-up E3 to the road with the connection E2. E2 E3 E2

18 MAINTENANCE 16 Servicing the aerator. OFF 1 ON 2 OFF 3

19 17 MAINTENANCE Replacing faucet cartridge. Not Included Tools 5/64 21/32 1 2

20 MAINTENANCE lb ft 4

21 19 MAINTENANCE 5 6

22 ZZ ZZ ZZ SPARE PARTS 20 Advice relevant code. ZZ ZZ ZZ ZZ ZZ ZZ ZA ZZ ZZ ZZ ZZ ZZ ZZ ZZ RIGHT ZZ LEFT ZZ RIGHT ZZ LEFT ZZ ZZ ZZ ZZ986110

23 21 FINISH CARE Maintaining Your Faucet Finish No matter which finish you select, here are a few simple steps to keep your ROHL kitchen and bath fixtures looking beautiful for years: Daily, pat the fixture dry with a soft cloth after each use - this is the single most important care you can give any finish! Occasionally, use a mild clear liquid soap with a neutral PH balance and water to gently clean your faucet. Do not use Dove or anti-bacterial soap. these products will leave a residue that could harm your finish. When necessary, a 50/50 solution of vinegar and water can be applied to remove hard water deposits. Do not soak the product in the solution. Vinegar is a mild acid which will harm the finish with prolonged contact. Avoid all cleaning products that contain ammonia, bleach, and alcohol. They may damage the finish. Use clear liquid soap with a neutral PH balance. Care and use products mentioned in this brochure may be ordered through your local ROHL retailer. 1. WIPE DOWN AFTER USE TO AVOID SPOTTING 2. USE A SOFT CLOTH FOR DETAIL CLEANING 3. DO NOT USE SPRAY CLEANERS WITH AMMONIA, ALCOHOL OR BLEACH 4. DO NOT USE ABRASIVES LIKE COMET, AJAX OR BONAMI F I N I S H C L E A N I N G C A R E POLISHED CHROME CHROME 50/50 VINEGAR AND WATER POLISHED NICKEL 50/50 VINEGAR AND WATER SATIN NICKEL 50/50 VINEGAR AND WATER FLITZ WAX OR ROHL DECORATIVE CLEANER AND POLISH FLITZ WAX OR ROHL DECORATIVE CLEANER AND POLISH FLITZ WAX OR ROHL DECORATIVE CLEANER AND POLISH FOR WATER SPOTTING ON POLISHED CHROME, USE SIMICHROME PASTE.

24 Please contact the local ROHL retailer or showroom where you purchased this product for all warranty related claims. Cod Ed ROHL LLC 3 PARKER IRVINE, CA TEL: FAX: CISAL Via Pietro Durio, Alzo di Pella (Novara) - Italia TEL: FAX: cisal@cisal.it WARNING: Please leave these instructions with the user. Do not discard them.