Plumbing Products & Tapware

Transcription

1 Solutions For TRADE Plumbing Products & Tapware

2 Solutions For TRADE Contents Page 3 5 Page 6 8 Page 9 12 Page Page Page 18 Page Page 23 Page 24 Page Page Page GE Pre-rinse Spray Unit GE Pre-rinse Replacement Parts GE Tapware Plug and Wastes Overflow Tubes and Drains In-Floor Drain Protectors In-Sink Drain Protectors Combi Oven Spray Hose Swirl Inlet Pre-rinse Replacement Parts Hose Reel Washdown Systems Floor & Counter Top Grating

3 GE Pre-rinse Spray Units 3 Ge Pre-rinse Spray Units A B FEATURES ADVANTAGES BENEFITS 6 Star WELS rating and AS/ NZS3718:2005 compliant. Watermark license no WMKA0034 Simple installation High pressure hose with swivel unions on both ends. Efficient use of water and meets all the Australian standards Comes alreaddy assembled. Long lasting, can take heavy work load and better movement of the unit, easier to use. Saves money due to less water usage and quality Australian made product. Save on installation time and errors. More efficient, less downtime and less wear and tear on unit, easy to maintain, saves money. Robust trigger and hand spray with built-in check valve. Will handle the pace of the commercial kitchen and prevents cross contamination from back flow. More efficient running of day to day task and better overall hygience standards in the work place. models shown with optional tf85-c pot filler. A TF81HJS Pre-rinse spray unit. Chrome plated hob mounted single stop. 15BSP MI inlet standard. B TF80W-S Pre-rinse spray unit. Chrome plated wall mounted no stop. 15BSP FI flexi-tails.

4 GE Pre-rinse Spray Units 4 Ge Pre-rinse Spray Units A B FEATURES ADVANTAGES BENEFITS 6 Star WELS rating and AS/ NZS3718:2005 compliant. Watermark license no WMKA0034 Simple installation High pressure hose with swivel unions on both ends. Efficient use of water and meets all the Australian standards Comes alreaddy assembled. Long lasting, can take heavy work load and better movement of the unit, easier to use. Saves money due to less water usage and quality Australian made product. Save on installation time and errors. More efficient, less downtime and less wear and tear on unit, easy to maintain, saves money. Robust trigger and hand spray with built-in check valve. Will handle the pace of the commercial kitchen and prevents cross contamination from back flow. More efficient running of day to day task and better overall hygience standards in the work place. models shown with optional tf85-c pot filler. A TF84HJS Pre-rinse spray unit. Chrome plated hob mounted twin mixer. 15BSP FI flexi-tails standard. B TF83WJS Pre-rinse spray unit. Chrome plated wall mounted exposed twin mixer.15bsp FI flexi-tails standard.

5 GE Pre-rinse Spray Unit 5 Pot Filler to suit GE Pre-rinse Spray Units TF85-J Chrome plated pot filler to suit GE range of pre-rinses. 250mm spout.

6 GE Pre-rinse Replacement Parts 6 Heavy Duty Pre-rinse Hoses GE Pre-rinse Trigger Spray Heavy duty pre-rinse hose. Length: 1000mm x 15FI BSP swivel both end GE Pre-rinse trigger spray. WaterMark approved, 6 Star WELS rated and complies to the ASTM F Cleanability Test Heavy duty pre-rinse hose. Length: 1500mm x 15FI BSP swivel both end.

7 GE Pre-rinse Replacement Parts 7 Lever Handle Stainless Steel Spring A B C A Lever handle for GE Pre-rinse trigger spray. A Grub screw for GE Pre-rinse trigger spray. B Stainless steel spring for GE Pre-rinse units. C TF84RK Ge Repair Kit

8 GE Pre-rinse Replacement Parts 8 Adaptors A B C A FISHER ADAPT Stainless steel adaptor to allow the pre-rinse trigger spray to be fitted to existing Fisher pre-rinse units. Hose thread: 3/4-14 Female Spray valve thread: 1/2 BSP. B GE ADAPT Stainless steel adaptor to allow the pre-rinse trigger spray to be fitted to existing T&S, Encore and CH series pre-rinse units. Hose thread: 7/8-20 Male Spray valve thread: 1/2 BSP. C T599B Reverse Adaptor to allow GE Series Hoses to fit the older style T & S encore and CH Model Pre Rinse Units.

9 GE Tapware 9 Basin Mixer With Disabled Lever A B features A 22319D Single lever basin mixer with 165mm disabled lever for hand basin mounting. Suitable for commercial kitchens, schools, hospitals, nursing homes, healthcare and residential markets All parts and fixtures are AS3718 and WELS approved. Chrome finish. Solid DR Brass construction. Heavy duty commercial style. B 22335D Single lever basin mixer with 165mm disabled lever for sink mounting. Suitable for commercial kitchens, schools, hospitals, nursing homes, healthcare and residential markets.

10 GE Tapware 10 Ezy-push Pillar Tap Ezy-push pillar tap - innovative self closing water saving tap. Cleverly designed to be simple to operate and to provide maximum water efficiency. features Approved to WaterMark AS3718 and is 6 Star WELS rated. Timeflow is 6 seconds. Heavy duty chrome plated finish. Constant water flow regardless of pressure. Vandal resistant design to ensure long life. Easy servicing and readily available parts.

11 GE Tapware 11 Commercial Taps features Hob mounted commercial tap. 200mm swivel gooseneck spout, flow regulator aerator. Single hole, hot and cold lever handles. All parts and fixtures are AS3718 and WELS approved. Chrome finish. Solid DR Brass construction. Heavy duty commercial style Hob mounted commercial tap. 300mm swivel gooseneck spout, flow regulator aerator. Single hole, hot and cold lever handles. Suitable for commercial kitchens, schools, hospitals, nursing homes, healthcare and residential markets.

12 GE Tapware 12 Knee Operated Valve Knee Operated Basin Kit A B features A TP08045 Chrome plated knee operated valve, 15mm with regulator - time flow (nuts not supplied). B TP08045K Chrome plated knee operated basin kit. Comprises: Chrome plated knee operated valve, 15mm with regulator - time flow. Fixed chrome plated basin outlet. Two mini cistern stops with wall plates. 1000mm flexi connector. Convenience of hands free operation with the assurance of high level hygiene. Flow cycle is actuated by the deflection of the lever in any direction from the rest position. Flow rate is regulated at a constant flow of 5 litres per minutes and automatically turns off with a non-concussive action after a period of 15 seconds.

13 Plugs and Wastes 13 Plugs and Wastes A 50BWA Plug and Waste. Polypropylene and 304 stainless steel waste with stainless steel plug and scrap trap. Fits 89mm sink hole and attaches to standard 50mm pipe. B PW89/50 Plug and Waste. Made in accordance with Australian Standard AS2887. Manufactured from glass reinforced polypropylene with a 304 stainless steel face. SAI approved to MP52-SPEC.005. Fits 89mm sink hole and attaches to standard 50mm pipe. C 50PGR 50mm Plug and Waste. Manufactured from glass reinforced polypropylene with a stainless steel face. D 40STD 40mm Plug and Waste. Manufactured from glass reinforced polypropylene with a stainless steel face.

14 Plug and Wastes 14 Twist Handle Waste Outlet and Replacement Parts A WD20T Twist handle waste outlet. Stainless steel flat strainer. B 72-FS Stainless steel flat strainer to suit WD20T. C 72-RK Replacement kit for WD20T includes flange rubber washer and paper gasket, body bushing, packing nut bushing and plug O-ring.

15 Overflow Tubes and Drains ½ NPS (38mm) Overflow Tube 1 NPS (25mm) Sink Drain to suit K Overflow E Overflow tube. Size: 1½ NPS (38mm) Length: 10 (254mm) Swedged stainless steel E A Sink drain to suit K Overflow. Size: 1 NPS (25mm) Length: 1½ (38mm). Nickel plated brass with brass locknut and rubber washer.

16 Overflow Tubes and Drains NPS (25mm) Sink Drain to suit K Overflow 1½ NPS (38mm) Length: 1½ (38mm) E A Sink drain to suit K Overflow. Size: 1 NPS (25mm) Length: 4 (102mm). Nickel plated brass with brass locknut and rubber washer. E Sink drain to suit E Overflow. Size: 1½ NPS (38mm) Length: 1½ (38mm). Stainless steel complete with brass locknut, rubber washer and brass tail piece.

17 Overflow Tubes and Drains NPS (25mm) Overflow Tube K Overflow tube. Size: 1 NPS (25mm) Length: 9 (229mm) Nickel plated brass with neoprene seat.

18 In-Floor Drain Protectors 18 Drain-Guard Drain-Guard 2 is a floor waste outlet fitting that has a 150 mm x 150 mm housing and re-moveable basket. The basket is simply dropped in or lifted out. To prevent any discharge of solid waste when the basket is removed a secondary screening plate is securely fixed below the basket. This product has a 98 mm diameter body that fits into (nominal) 100 mm pipes..

19 In-Sink Drain Protectors 19 Sink - Shield Sink-Shield 2 is a sink outlet fitting that screens and retains solid waste from waste water in a basket. The basket is removed and emptied when full. A secondary screening plate is fixed securely under the basket to prevent the discharge of solid waste in the event of the basket not being replaced. The basket is simple to lift out and dropped back in as required. This product has an 89 mm diameter body that fits a standard 90 mm sink outlet. Basket Size: 450 cc

20 In-Sink Drain Protectors 20 Sink Safe Sink-Safe 2 is a sink outlet fitting that screens and retains solid waste from waste water in a basket. The basket is removed and emptied when full. A secondary screening plate is fixed securely under the basket to prevent the discharge of solid waste in the event of the basket not being replaced. The basket is simple to lift out and dropped back in as required. This product has an 89 mm diameter body that fits a standard 90 mm sink outlet. This model has a factory fitted release valve. The valve is activated by an extended handle and allows the user to open the sink outlet (and allow the sink contents be discharged through the basket) without having to place their hands in the water. This is a significant health and safety feature for all commercial kitchens. Basket Size: 340 cc

21 In-Sink Drain Protectors 21 Sink Shield Large Sink-Shield Large is a sink outlet fitting that screens and retains solid waste from waste water in a basket. The basket is removed and emptied when full. A secondary screening plate is fixed securely under the basket to prevent the discharge of solid waste in the event of the basket not being replaced. The basket is simple to lift out and dropped back in as required. This product has a 124 mm diameter body that requires a 125 mm sink outlet. Basket Size: 1100 cc

22 In-Sink Drain Protectors 22 Sink Safe Large Sink-Safe Large is a sink outlet fitting that screens and retains solid waste from waste water in a basket. The basket is removed and emptied when full. A secondary screening plate is fixed securely under the basket to prevent the discharge of solid waste in the event of the basket not being replaced. The basket is simple to lift out and dropped back in as required. This product has a 124 mm diameter body that fits 125 mm sink outlet. This model has a factory fitted release valve. The valve is activated by an extended handle and allows the user to open the sink outlet (and allow the sink contents be discharged through the basket) without having to place their hands in the water. This is a significant health and safety feature for all commercial kitchens. Basket Size: 850 cc

23 Combi Oven Spray Hose 23 Combi Oven Spray Hose Assembly SACOMBI-L Combi oven spray hose assembly complete with mini tap and 150mm braided stainless steel hose.

24 Swirl Inlet 24 Swirl Inlet Fitting 2906SS Swirl inlet fitting. Stainless steel.

25 Pre-rinse Replacement Parts 25 Pre-rinse Outer Spring Pre-rinse Hoses 16-HS Pre-rinse outer spring. Will suit T&S, Encore and CH Models. 16-HU44 44 Stainless steel pre-rinse hose. Will suit T&S, Encore and CH Models. 16-HU60 60 Stainless steel pre-rinse hose. Will suit T&S, Encore and CH Models. 16-HU96 96 Stainless steel pre-rinse hose. Will suit T&S, Encore and CH Models.

26 Pre-rinse Replacement Parts 26 Pre-rinse Wall Bracket Pre-rinse Tap Spindle Kit 16-WB06 6 Pre-rinse wall bracket. Will suit T&S, Encore and CH Models. 61-FSC Pre-rinse tap spindle kit - cold. Will suit T&S, Encore and CH Prerinses. 61-FSH Pre-rinse tap spindle kit - hot. Will suit T&S, Encore and CH Prerinses.

27 Hose Reel Washdown Systems 27 Powder Coated Steel Hot Wash Systems features 7800-OLP Powder coated steel hot wash system. Hose size 15m x 12mm ID Working temperature -30ºC to +85ºC (Hose) Working pressure 240psi-16bar Hose Material: White PVC Inlet Fitting: 12mm NPT Outlet Fitting:12mm BSPM Open design for easy cleaning. Optional Extra: RB65 red low pressure gun, see separate listing.

28 Hose Reel Washdown Systems 28 Semi Enclosed Hot Wash Systems Features HW1015 Semi enclosed hot wash system. 15m x 10mm Hose Working temperature -30ºC to +85ºC (Hose) Working pressure 240psi-16bar Hose Material: White PVC Reel Materials: Composite Semi Enclosed: Open top and Inlet Fitting: 3/8 BSP Female Outlet Fitting: 3/8 BSP Male bottom for easy cleaning HW1215 Semi enclosed hot wash system. 15m x 12mm Hose Optional Extra: RB65 red low pressure gun, see separate listing.

29 Hose Reel Washdown Systems 29 Low Pressure Spray Gun RB65 Features Low pressure gun for hygiene cleaning in the food industry. Completely sealed. Ergonomic. Adjustable jet cone. Trigger protection. Chromed Brass Body, 1-2 BSPF inlet. Flow rate bar. Max. pressure rating 24 bar (350 PSI). Temperature Rating - 90deg.C Swivel inlet, complete with 303 stainless steel piston.

30 Hose Reel Washdown Systems 30 Stainless Steel Hot Wash Systems Features S Stainless steel hot wash system. Hose size 10m x 10mm ID Working temperature -30ºC to +85ºC (Hose) Working pressure 240psi-16bar Hose Material: White PVC Inlet Fitting: 10mm NPT Outlet Fitting: 10mm BSPM Open design for easy cleaning. Optional Extra: RB65 red low pressure gun, see separate listing. S Stainless steel hot wash system. Hose size 15m x 12mm ID Working temperature -30ºC to +85ºC (Hose) Working pressure 240psi-16bar Hose Material: White PVC Inlet Fitting: 12mm NPT Outlet Fitting: 12mm BSPM Open design for easy cleaning. Optional Extra: RB65 red low pressure gun, see separate listing.

31 Floor & Counter Top Grating 31 Counter Top Grating COUNTER_GRATE FLOOR_GRATE Counter top grating made to order. Available in 304 or 316 grade stainless steel. Finger holes can be incorporated if required. Trays to suit. This product is manufactured to your specifications. Please contact our friendly staff to discuss your requirements including number of finger holes required. Floor grating made to order. Available in 304 or 316 grade stainless steel. May be constructed to fit Dry Basket Arrestor. Floor trays to suit. This product is manufactured to your specifications. Please contact our friendly staff to discuss your requirements including number of finger holes required and whether grating is for pedestrian traffic and/or forklift etc.

32 Floor & Counter Top Grating 32 Counter Top Grating PS100X1000 BAR GRATE PS250X1000 BAR GRATE PS125X1000 BAR GRATE PS150X1000 BAR GRATE PS175X1000 BAR GRATE PS200X1000 BAR GRATE PS225X1000 BAR GRATE PS275X1000 BAR GRATE PS300X1000 BAR GRATE 100mm x 1000mm Counter Top Grating. 250mm x 1000mm Counter Top Grating. 25mm x 1000mm Counter Top Grating. 150mm x 1000mm Counter Top Grating. 175mm x 1000mm Counter Top Grating. 200mm x 1000mm Counter Top Grating. 225mm x 1000mm Counter Top Grating. 275mm x 1000mm Counter Top Grating. 300mm x 1000mm Counter Top Grating. 304 stainless steel (316 also available POA). 3mm wedge wire. Finger holes can be incorporated if required, please advise when ordering. Custom sizes available on request. Trays to available to suit POA. Please contact our friendly staff to discuss your requirements.

33 Solutions For TRADE 1 Nelson Street, Moorabbin VIC 3189 AUSTRALIA Tel: Fax: