AD-115ES Parts Manual

Transcription

1 AD-115ES Parts Manual 24 VAC Phase 7 / S.A.F.E. System July 2002 American Dryer Corporation 88 Currant Road Fall River, MA Telephone: (508) / Fax: (508) techsupport@amdry.com ADC Part No

2 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following FOR YOUR SAFETY caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. POUR VOTRE SÉCURITÉ Ne pas entreposer ni utiliser d essence ni d autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: AD-115ES DATE OF PURCHASE MODEL NO. RESELLER S NAME Serial Number(s) Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) or telephone your order directly to the ADC Parts Department at (508) Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. IMPORTANT NOTE TO PURCHASER Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

3 Table of Contents Control Door Assembly... 4 Phase 7 Non-Coin Microprocessor Control Panel Assembly... 5 Dual Timer Tap Touch Controls... 6 Control Box Assembly... 7 Dual Timer Control Box Assembly... 8 Lint Drawer / Lint Drawer Switch Box Assemblies for Models Mfd. as of April 12, Lint Drawer / Lint Drawer Switch Box Assemblies for Models Mfd. prior to April 12, Drop Lint Door Assembly Front Panel Main Door Assembly Microprocessor Temperature Sensor Bracket Assembly Non-Microprocessor Temperature Sensor Bracket Assembly Tumbler / Support Assemblies Tumbler Bearing Mount Assembly Idler Bearing Mount Assembly T.E.F.C. Tumbler Motor Mount Assembly Blower Motor Mount Assembly Direct Spark Ignition Burner Assembly Sail Switch Assembly kw Volt Electric Oven Assembly kw / 480 Volt Electric Oven Assembly kw Volt Electric Oven Assembly kw / 480 Volt Electric Oven Assembly Volt Oven Relay Box Assembly Volt Oven Relay Box Assembly Steam Damper Assembly Phase 7 Reversing Relay Panel Assembly Dual Timer Reversing Relay Mounting Panel Assembly Back Guard Assembly Fire Suppression System Solenoid Assembly for Models Mfd. as of September 23, Fire Suppression System Solenoid Assembly for Models Mfd. prior to September 23, S.A.F.E. Temperature Probe Assembly Additional Parts Available... 43

4 Control Door Assembly * 1 Control Door Assembly (for gas models and electric models Only) * 1 Short Control Door (for steam models Only) Noise Suppression Tape (sold by the foot) ADC Logo Logo Double-Sided Tape Kit Multi-Thread U-Nut #10-32 x 1/2 Phillips Head Machine Screw * Specify color when ordering. 4 American Dryer Corporation

5 Phase 7 Non-Coin Microprocessor Control Panel Assembly Phase 7 Non-Coin Keypad Phase 7 Microprocessor Controller (computer) Panel ONLY Phase 7 Microprocessor Controller with S.A.F.E. System (for models mfd. as of December 1, 2003) Phase 7 Microprocessor Controller with S.A.F.E. System (for models mfd. prior to December 1, 2003) Phase 7 Microprocessor Controller without Fire Suppression System #6-32 x 3/4 Phillips Round Head Machine Screw #6 Star Washer mA Fuse amp Fuse

6 Dual Timer Tap Touch Controls Minute Timer 24 VAC Minute Timer 24 VAC Red Pilot Light 24 VAC Tap Touch Switch Relay SPST 24V Terminal Closed Block #6-32 Pal Nut Dual Timer Panel Complete Assembly (includes illus. nos. 1 through 15) Dual Timer Panel ONLY #6 Star Washer #6-32 Hex Nut #10-24 x 1/2 Phillips Pan Head Machine Screw #8-32 x 1/4 Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer 6 American Dryer Corporation

7 Control Box Assembly Electric Box L-70 Ground Lug #10-16 x 1/2 Hex Head TEK Crimptite Screw

8 Dual Timer Control Box Assembly Pin Socket Connector Socket Terminal Pin / Socket Extraction Tool Pin Connector Bracket #10-16 x 1/2 Hex Washer TEK Screw #8-32 x 1/2 Phillips Round Head Machine Screw VAC Transformer 50/60 Hz (for gas models and steam models) #8-23 Pal Nut #6-32 x 1 Phillips Round Head Machine Screw Position Terminal Block #6-32 Pal Nut * #8 x 3/8 Phillips Round Head TEK Screw /2-amp (Slo-Blo) Fuse amp (fast acting) Fuse (for electric models) * Fuse Block / Strip #10-16 x 1/2 TORX Crimptite Screw VAC Relay (for electric models) #10-16 x 1/2 TORX Crimptite Screw L-70 Ground Lug Pin Connector * Socket Terminal * Pin Terminal Pin Connector /15-Position Strain Relief Not Illustrated Pin Connector Pin Terminal Socket Terminal Pin Socket Connector Pin / Socket Extraction Tool * As required (either 2 or 3). 8 American Dryer Corporation

9 Lint Drawer / Lint Drawer Switch Box Assemblies For Models Mfd. as of April 12, Lint Bag Button Head Rivet Lint Basket Assembly (includes illus. nos. 1 through 4) Stainless Steel Lint Basket Assembly (includes illus. nos. 1 through 4) Lint Drawer Handle Stainless Steel Lint Drawer Handle Lint Drawer Switch Pin Connector (female) Socket Terminal Pin / Socket Extraction Tool Not Illustrated Guarded Lint Drawer Switch Assembly (includes illus. nos. 4 through 7) #8-18 x 7/16 Phillips Pan Head TEK Screw Pin Terminal Pin Connector (male) #8 Star Washer #8-32 x 3/8 Hex Nut

10 Lint Drawer / Lint Drawer Switch Box Assemblies For Models Mfd. prior to April 12, * Lint Basket Assembly Lint Drawer Switch ONLY Pin Connector (female) Socket Terminal ONLY Pin / Socket Extraction Tool Not Illustrated Guarded Lint Drawer Switch Assembly (includes illus. nos. 3 through 6) #8 Star Washer Pin Terminal ONLY Pin Connector (male) #8-32 x 3/8 Hex Nut * Specify color when ordering. 10 American Dryer Corporation

11 Drop Lint Door Assembly * 1 Drop Lint Door Assembly (includes illus. nos. 1, 2, and 4) Stainless Steel Drop Lint Door Assembly (includes illus. nos. 1, 2, and 4) Gasket (sold by the foot) #10-16 x 1/2 Hex Head TEK Crimptite Screw Noise Suppression Tape (sold by the foot) * Specify color when ordering

12 Front Panel Main Door Assembly 12 American Dryer Corporation

13 Front Panel Main Door Assembly 1* Cold Rolled Steel Main Door Handle #10-32 Hex Acorn Lock Nut (black) #10-32 x 7/16 Door Latch Screw /4-20 Free Spin Washer Door Glass Large Steel Door Gasket T-20 TORX Screw /4-20 x 5/8 Carriage Bolt Door Hinge 10* Cold Rolled Steel Main Door Assembly (for models mfd. as of September 10, 2005) Cold Rolled Steel Main Door Assembly (for models mfd. prior to September 10, 2005) Magnet (for models mfd. as of September 10, 2005) Black Socket Cap Screw Bottom Hinge Block Nylon Washer Black Socket Cap Screw Top Hinge Block Front Panel Assembly (for models mfd. as of September 10, 2005) (includes illus. nos. 7, 11, and 17) Front Panel Assembly (for models mfd. prior to September 10, 2005) (includes illus. nos. 17, 19, and 20) Main Door Switch Housing Assembly /32 x 1/4 Aluminum Rivet (for models mfd. prior to September 10, 2005) Friction Door Latch (for models mfd. prior to September 10, 2005) Main Door Magnet Bracket (for models mfd. as of September 10, 2005) * Specify color when ordering

14 Microprocessor Temperature Sensor Bracket Assembly Temperature Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Temperature Sensor Bracket ONLY /4 Tinnerman Push-On Fastener /4 Temperature Sensor Probe Assembly (includes illus. nos. 2, 3, and 8 through 10) #6-32 Hex Nut #6 Star Washer Large Automatic Reset Thermostat #6-32 x 1/4 Phillips Round Head Machine Screw /4 x Insulated Terminal Pin Connector (female) Socket Terminal Pin Connector (male) Pin Terminal Pin / Socket Extraction Tool Not Illustrated #8-18 x 7/16 Phillips Pan Head TEK Screw 14 American Dryer Corporation

15 Non-Microprocessor Temperature Sensor Bracket Assembly Non-Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 11 and 15) Temperature Sensor Bracket ONLY #6-32 Hex Nut #6 Star Washer Large Thermostat Large Thermostat Large Thermostat Large Automatic Reset Thermostat #6-32 x 1/4 Phillips Round Head Machine Screw /4 x Insulated Terminal Pin Connector (female) Socket Terminal Pin Connector (male) Pin Terminal Pin / Socket Extraction Tool Not Illustrated #8-18 x 7/16 Phillips Pan Head TEK Screw Sensor Jumper Harness

16 Tumbler / Support Assemblies * 1 Tumbler ONLY Tumbler and Support Assembly Complete (includes illus. nos. 1 through 12) #10-16 x 1/2 Hex Head TEK Crimptite Screw Tumbler Rib /16-18 x 3/4 Socket Button Head Screw /2-13 x 43 Tie Rod Tumbler Reinforcing Plate ** Tumbler Shim Tumbler Support /2-13 Hex Nut /2 Lock Washer /16 Flat Washer Felt Collar #847 Adhesive for Felt Collar Not Illustrated Rotation Magnet Holder Assembly * Felt collar is not included and must be ordered separately. ** As required. 16 American Dryer Corporation

17 Tumbler Bearing Mount Assembly /4 SK Bushing 2* A68 V-Belt Tumbler Pulley /8-11 x 3 Hex Head Machine Bolt /8 Flat Washer /4 Pillow Bearing /8 Flat Washer /8 Lock Washer /8-11 Hex Nut /8-16 x 1-1/2 Hex Head Machine Bolt /8-16 Hex Nut Tumbler Bearing Mount Assembly (includes illus. nos. 4 through 13) /4 Pillow Bearing /2-13 x 3 Square Head Machine Bolt /2-13 Hex Nut /8-16 Hex Nut /8 Lock Washer /8 Flat Washer /8-16 x 1-1/2 Hex Head Machine Bolt /8 Flat Washer /8 Retaining Ring /8 Hinge Pin /4 Retaining Ring /4 Flat Washer /4 Split Lock Washer /4-20 x 1/2 Hex Head Machine Bolt Rotational Sensor Assembly Rotational Sensor Mounting Bracket * Replace in matched sets (both belts)

18 Idler Bearing Mount Assembly 18 American Dryer Corporation

19 Idler Bearing Mount Assembly Bushing A3.0 Pulley 3* A68 V-Belt SK Bushing 5* V 740 V-Belt Idler Pulley /4 x 1/4 x 4-5/8 Key Idler Shaft Pillow Block Bearing with Setscrews /8 Flat Washer /8-16 x 1-1/2 Hex Head Machine Bolt /4-20 x 1/2 Hex Head Machine Bolt /16-18 x 3 Hex Head Machine Bolt /16 Flat Washer /16-18 Hex Nut /16 Lock Washer Idler Bearing Mount Assembly Complete (includes illus. nos. 8 through 11 and 17 through 24) Idler Bearing Mount ONLY Pillow Block Bearing with Setscrews /8 Flat Washer /8 Lock Washer /8-16 Hex Nut Idler Adjustment Hinge /4 Lock Washer /4-20 Hex Nut * Replace in matched sets (both belts)

20 T.E.F.C. Tumbler Motor Mount Assembly /8 SK Bushing Pulley (for 60 Hz models Only) Pulley (for 50 Hz models Only) 3* V 740 V-Belt /2 x 90 Connector /16-18 x 3/4 Hex Head Machine Bolt /16 Flat Washer /4 hp 208 / 230 / 280 / 460V 3ø 50 / 60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame) Tumbler Motor Mount ONLY (56Z frame) ** 1 Totally Enclosed, Fan-Cooled Tumbler Motor Mount Assembly Complete for 60 Hz Models ONLY (includes illus. nos. 1, 2, 5 through 11, 15, and 16) ** 1 Totally Enclosed, Fan-Cooled Tumbler Motor Mount Assembly Complete for 50 Hz Models ONLY (includes illus. nos. 1, 2, 5 through 11, 15, and 16) /16-18 Hex Nut /16 Lock Washer /16 Flat Washer /16-18 Hex Nut /16 Lock Washer /16 Flat Washer /18-16 x 3 Hex Head Machine Bolt /8-16 Hex Nut * Replace in matched sets (both belts). ** Specify voltage when ordering. IMPORTANT: For voltages higher than 460 VAC 50 Hz, contact the factory for correct part number of motor or motor mount assembly. 20 American Dryer Corporation

21 Blower Motor Mount Assembly /16-18 x 1 Hex Head Bolt /16 Flat Washer hp Motor 208 / 230 / 380 / 460V 60 Hz and V 50 Hz /16-18 Hex Nut /16 Lock Washer /16 Flat Washer Noise Suppression Tape (sold by the foot) /16 Flat Washer /16 Lock Washer /16-18 Hex Nut Blower Motor Mount /8 Motor Washer Riveted High Flow Impellor 7/8 Bore (60 Hz dryers) Riveted Impellor 7/8 Bore (50 Hz dryers) /16 x 3/16 x 1-3/8 Key /8 Motor Washer /2-20 Left Hand Jam Nut

22 Direct Spark Ignition Burner Assembly 22 American Dryer Corporation

23 Direct Spark Ignition Burner Assembly Burner Box to 3/4 Reducing Coupling Pipe Bracket #10-16 x 1/2 Hex Head TEK Crimptite Screw /4 x 40 Nipple /4 Street Elbow /4 Union /4 x 4 Nipple Flat Gas Pipe Bracket Gas Valve (for natural gas) Gas Valve (for liquid propane gas) Extended Pipe Bracket (bent) #10-32 Type F Green Ground Screw Direct Spark Ignition Module with High Voltage Wire Port Manifold #8 Burner Orifice (natural gas) #31 Burner Orifice (liquid propane gas) Liquid Propane Conversion Kit (for models mfd. as of June 19, 2007) Liquid Propane Conversion Kit (for models mfd. prior to June 19, 2007) Direct Spark Ignition Manifold Rest Burner Tube Burner Tube Support Female / 3 Male 1/4 Adaptor Burner Box Cover Plate Ignitor / Flame-Probe Sight Hole Disc Ignitor / Flame-Probe Assembly High Voltage Wire (for models with 1/4 spade connection at module) High Voltage Wire (for models with spike style connection at module) #6-32 Pal Nut Manual Reset Hi-Limit #6-32 x 1/2 Machine Screw Hi-Limit Bracket 28 1 Sail Switch Assembly (refer to Sail Switch Assembly on page 24) Fenwal Ground Wire #6 Flat Washer #6-32 x 1 Phillips Round Head Machine Screw Open / Closed Bushing Liquid Propane Burner Baffle

24 Sail Switch Assembly 24 American Dryer Corporation

25 Sail Switch Assembly Sail Switch Actuator Rod Sail Switch Damper (flat) /8 Push-On Fastener Sail Switch Box with Cover and Bracket ONLY Sail Switch Box Assembly Complete (includes illus. nos. 1 through 4 and 6 through 10) #10 x 1/2 Hex Washer TEK Screw #4 x 3/4 Pan Head A Machine Screw Sail Switch ONLY Sail Switch Box Cover and Bracket ONLY #10-16 x 1/2 Hex Head TEK Crimptite Screw Twin Speed Nut

26 60 kw Volt Electric Oven Assembly 26 American Dryer Corporation

27 60 kw Volt Electric Oven Assembly Electric Oven Box ONLY v 3.3 kw Open Coil Element v 3.3 kw Open Coil Element #8-18 x 7/16 Phillips Pan Head TEK Screw Hi-Limit Thermostat #10-16 x 1/2 Hex Head TEK Crimptite Screw Sail Switch Box Twin Speed Nut Sail Switch Box Cover Sail Switch ONLY #4 x 3/4 Pan Head A Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) /8 Push-On Fastener #10-16 x 1/2 Hex Head TEK Crimptite Screw Internal Ceramic Insulator External Ceramic Insulator #10-32 Hex Nut Bus Bar (sold by the foot) #10 Star Washer #8 Connector Pipe Bracket Hi-Limit and Sail Switch Harness /4 Lock Washer /4-20 x 1/2 Long Bolt Burner Cover Assembly Right Front Oven Panel Left Front Oven Panel #8 Oven Assembly Wiring Caterpillar Grommet Oven Electrical Cover

28 60 kw / 480 Volt Electric Oven Assembly 28 American Dryer Corporation

29 60 kw / 480 Volt Electric Oven Assembly Electric Oven Box ONLY kw Open Coil Element (for 380v models) kw Open Coil Element (for v models) kw Open Coil Element (for 480v models) #8-18 x 7/16 Phillips Pan Head TEK Screw Hi-Limit Thermostat #10-16 x 1/2 Hex Head TEK Crimptite Screw Sail Switch Box Twin Speed Nut Sail Switch Box Cover Sail Switch #4 x 3/4 Pan Head A Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) /8 Push-On Fastener #10-16 x 1/2 Hex Head TEK Crimptite Screw Internal Ceramic Insulator External Ceramic Insulator #10-32 Hex Nut Bus Bar (sold by the foot) #10 Star Washer #8 Connector Pipe Bracket Hi-Limit and Sail Switch Harness /4 Lock Washer /4-20 x 1/2 Long Bolt Burner Cover Assembly Right Front Oven Panel Left Front Oven Panel #8 Oven Assembly Wiring Caterpillar Grommet Oven Electrical Cover

30 72 kw Volt Electric Oven Assembly 30 American Dryer Corporation

31 72 kw Volt Electric Oven Assembly Electric Oven Box ONLY Volt 4 kw Open Coil Element Volt 4 kw Open Coil Element #8-18 x 7/16 Phillips Pan Head TEK Screw Hi-Limit #10-16 x 1/2 Hex Head TEK Crimptite Screw Sail Switch Box Twin Speed Nut Sail Switch Box Cover Sail Switch #4 x 3/4 Pan Head A Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) /8 Push-On Fastener #10-16 x 1/2 Hex Head TEK Crimptite Screw Internal Ceramic Insulator External Ceramic Insulator #10-32 Hex Nut Bus Bar (sold by the foot) #10 Star Washer #8 Connector Pipe Bracket Hi-Limit and Sail Switch Harness /4 Lock Washer /4-20 x 1/2 Long Bolt Burner Cover Assembly Right Front Oven Panel Left Front Oven Panel #8 Oven Assembly Wiring Caterpillar Grommet Oven Electrical Cover

32 72 kw / 480 Volt Electric Oven Assembly 32 American Dryer Corporation

33 72 kw / 480 Volt Electric Oven Assembly Electric Oven Box ONLY kw Open Coil Element (for 380 volt models) kw Open Coil Element (for volt models) kw Open Coil Element (for 480 volt models) #8-18 x 7/16 Phillips Pan Head TEK Screw Hi-Limit #10-16 x 1/2 Hex Head TEK Crimptite Screw Sail Switch Box Twin Speed Nut Sail Switch Box Cover Sail Switch #4 x 3/4 Pan Head A Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) /8 Push-On Fastener #10-16 x 1/2 Hex Head TEK Crimptite Screw Internal Ceramic Insulator External Ceramic Insulator #10-32 Hex Nut Bus Bar (sold by the foot) #10 Star Washer #8 Connector Pipe Bracket Hi-Limit and Sail Switch Harness /4 Lock Washer /4-20 x 1/2 Long Bolt Burner Cover Assembly Right Front Oven Panel Left Front Oven Panel #8 Oven Assembly Wiring (for volt models) #8 Oven Assembly Wiring (for 480 volt models) Caterpillar Grommet Oven Electrical Cover

34 Volt Oven Relay Box Assembly Transformer amp 24 VAC Relay Power Distribution Block /4-20 x 2 Carriage Bolt #10-16 x 1/2 Hex Head TEK Crimptite Screw #8-18 x 7/16 Phillips Pan Head TEK Screw /4-20 Free Spin Wash Nut L-70 Terminal Lug Box Cover Universal Bushing Power Distribution Block x 15mm Din Rail (sold by the inch) Din Rail End Stop amp / 3-Pole Circuit Breaker Power Block Label 34 American Dryer Corporation

35 Volt Oven Relay Box Assembly Transformer #10-16 x 1/2 Hex Head TEK Crimptite Screw L-125 Ground Lug L-70 Ground Lug /4-20 x 1 Tap Bolt /4 Flat Washer /4 Lock Washer /4-20 Hex Nut amp 24 Volt Relay Power Distribution Block /4-20 x 2 Carriage Bolt /4-20 Free Spin Wash Nut x 15mm Din Rail (sold by the inch) Din Rail End Stop amp / 3-Pole Circuit Breaker Universal Bushing Power Block Label

36 Steam Damper Assembly Steam Coil Assembly Steel Steam Coil Assembly /16 Lock Washer /16-18 Hex Nut /4-20 Hex Nut /4 Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) /4 Lock Washer /4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2 length) /16-20 Stainless Steel Acorn Nut /2 Bore x 3 Stroke Piston Piston Support Bracket /4-20 Hex Nut /4 Lock Washer /4 x 1/8 Connector /4 Tubing (sold by the foot) /4 x 1/8 Connector /8 Needle Valve /8 Close Nipple Way Micro Valve 24 VAC #6-32 x 1 Phillips Round Head Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket /4-20 Hex Nut /4 Lock Washer /8 N.P.T. Silencer (muffler) 36 American Dryer Corporation

37 Phase 7 Reversing Relay Panel Assembly /4-20 Hex Nut hp Contactor #8-32 Pal Nut #6-32 x 1-1/2 Slotted Round Head Machine Screw Position Terminal Block Reversing Contactor Volt Transformer (for gas and steam models) Volt Transformer (for gas and steam models) Volt Transformer (for gas and steam models) Arc Suppressor Board /4 Star Washer /16-18 Hex Nut /4-20 x 1 Self-Clinching Stud /16 Lock Washer Fuse Holder /4-amp (3AG) Slo-Blo Fuse (for volt gas and steam models) amp (3AG) Slo-Blo Fuse (for volt electric models) Relay Panel #8-18 x 7/16 Phillips Head TEK Screw #6-32 Pal Nut End Stop #8-32 x 7/16 Phillips Pan Head Machine Screw L-70 Ground Lug /4 35 x 15mm Din Rail Ground Label VAC Relay (for electric models) Pole 1-amp Circuit Breaker (for volt electric and all 480 volt models)

38 Dual Timer Reversing Relay Mounting Panel Assembly Contactor / Relay Mounting Panel L-70 Ground Lug #8-32 x 1/2 Phillips Pan Head Machine Screw End Stop / Bracket hp Impellor (fan / blower) Contactor Din Mounting Rail Reversing (impellor / blower / fan) Contactor 24 VAC #8-32 x 1/2 Phillips Round Head Screw Reversing Timer (50/60 Hz) 24 VAC #8-32 Pal Nut Volt Step Down Transformer (for gas and steam models) Volt Step Down Transformer (for gas and steam models) Volt Step Down Transformer (for gas and steam models) #10-16 x 1/2 Hex Washer TEK Screw #6-32 x 1-1/2 Phillips Round Head Machine Screw Position Power Distribution Block #6-32 Pal Nut #10-16 x 1/2 Hex Head TEK Crimptite Screw 38 American Dryer Corporation

39 Back Guard Assembly Top Back Guard #8-18 x 7/16 Phillips Pan Head TEK Screw Lower Back Guard ADC Name and Address Label Installation Instructions Label Routine Maintenance Label to 14 Increaser Gas / Steam / Electric

40 Fire Suppression System Solenoid Assembly For Models Mfd. as of September 23, Fire Suppression System 3 GPM 3/8 N.P.T. Spray Nozzle /8 N.P.T. Brass Lock Nut Water Jet Pressure Switch / NH x 3/8 N.P.T. Nylon Hose Adapter /8 M.P.T. Brass Plug /8 M.P.T. x 3/8 M.P.T. Brass Hex Nipple /8 F.P.T. Brass Tee /8 Brass 45 Street Elbow Fire Suppression System Sprinkler Head Mounting Plate /8 Comp x 3/8 M.P.T. Brass Connector Medium Dryer Fire Suppression System Valve Bracket Stainless Steel Flex Hose with 3/8 Compression M4 x 6mm Phillips Head Slotted Machine Screw #10-16 x 1/2 Hex Head TEK Crimptite /4 GHT x 1/8 x 3/8 N.P.T. Brass Tee Fire Suppression System Water Inlet Valve /16-20 x 3/8 N.P.T. Brass Adapter #8-32 3/8 Hex Nut R.C. Network Assembly 40 American Dryer Corporation

41 Fire Suppression System Solenoid Assembly For Models Mfd. prior to September 23, Solenoid Valve 24 VAC 50/60 Hz /8 F.P.T. Brass Tee /8 M.P.T. Brass Plug /8 Comp x 3/8 M.P.T. Brass Connector Long Stainless Steel Flexible Tubing Sprinkler Head Mounting Plate /8 N.P.T. Brass Lock Nut /8 Brass 45 Elbow #8-32 x 3/8 OD Hex Nut #10 x 1/2 Self-Drilling Screw GPM 3/8 F.P.T. Spray Nozzle /8 N.P.T. Nylon Hose Adapter RC Network Assembly /8 x 1/8 Bushing /8 Hex Nipple (for models mfd. as of December 1, 2003) Pressure Switch (for models mfd. as of December 1, 2003)

42 S.A.F.E. Temperature Probe Assembly Sensor Activated Fire Extinguishing System Temperature Probe Assembly (includes illus. nos. 1 through 5) Push-On Fastener Sensor Bracket #8-18 x 7/16 Phillips Pan Head TEK Screw Connector Pin 42 American Dryer Corporation

43 Additional Parts Available Part No. Description Clean Lint Screen Label CAUTION Exhaust / Lint Screen Label WARNING Fire Hazards Label Phase 7 OPL Program Location Summary Label /8 Straight (BX) Connector /8 x 45 (BX) Connector /8 Red Jacket (BX) Insulator /8 Jiffy Clip (BX retainer clip) /8 Greenfield (BX) /4 In-Line Connector Red Butt Connector #74B Wire Nut Closed End Connector /4 Insulated (female) Terminal /2 Wire Tie Harness Tie Harness Tie Mounting Clip Manometer (water column test gauge) #847 Adhesive for Felt Collar White Brush-In-Cap Bottle Touch-Up Paint (0.6 oz. bottle)

44 ADC Part No /12/09-0