Series R Helical Rotary Liquid Chillers

Size: px
Start display at page:

Download "Series R Helical Rotary Liquid Chillers"

Transcription

1 Series R Helical Rotary Liquid Chillers Model RTHD Tons (60 Hz) Tons (50 Hz) Built for Industrial and Commercial Applications May 2004

2 Introduction To meet a wide range of applications in the medium-tonnage, water-cooled market, Trane is proud to introduce the model RTHD helical rotary liquid chiller. The introduction of this next-generation chiller an exciting step forward in application versatility, ease of installation, control precision, reliability, energy-efficiency, and operational costeffectiveness. The new RTHD chiller is designed to deliver proven Series R performance, plus all the benefits of an advanced heat transfer design and a low-speed, direct-drive compressor. Important Design Advances and New Features Major design advances include: Higher full-load energy efficiency reduces both operating and life-cycle costs. CH530 controls enable: - scrolling access to inputs and operating information via the LCD touch-screen display; - freedom from interoperability concerns with LonMark communications; - job-specific communication options that allow greater reporting flexibility. Improved startup temperature capabilities and reduced sensitivity to condenser water temperatures alleviate the most common startup concerns. Removed Liquid Vapor Separator, providing lighter unit weight and simplified refrigerant piping, for less expensive handling, separation, and installation. The industrial-grade design of the Series R helical rotary chiller is ideal for both industrial and commercial markets, in applications such as office buildings, hospitals, schools, retail buildings, and industrial facilities. The linear unloading compressor, wide operating temperature range, advanced controls, electronic expansion valve, short anti-recycle timers, and industry-leading efficiencies mean that this latest Trane Series R chiller is the perfect choice for tight temperature control in almost any application temperatures, and under widely varying loads American Standard Inc. All rights reserved.

3 Contents Introduction Features and Benefits Options Display Application Considerations Selection Procedure Model Nomenclature General Data Electrical Data and Connections Dimensions and Weights Mechanical Specifications Conversion Table

4 Features and Benefits Application Versatility and High Performance Screw compressor technology and the electronic expansion valve provide reliable performance in an expanded range of operating temperatures. Tight water temperature control extends to operation of multiple chillers in parallel or series configurations, offering further system design flexibility for maximum efficiency. Advanced design enables chilled water temperature control to +/- 0.5 F (.28 C) for flow changes up to 10 percent per minute, plus handling of flow changes up to 30 percent per minute for comfort cooling. Two-minute stop-to-start and fiveminute start-to-start anti-recycle timer allows tight chilled water temperature control in constant or transient lowload applications. LonMark communications capability provides excellent, trouble-free interoperability. Applications in this catalog specifically excluded from the ARI certification program are: Low temperature applications, including ice storage Glycol 50Hz units below 200 nominal tons Generic Building Automation System points are available for easy access to operational information. Extensive information on professional design selection and layout is available in a simple, highly readable electronic format. Standard model RTHD configurations are in stock and available for immediate delivery, and Trane offers the fastest ship cycles in the industry for built-toorder units. Industrial / Low Temperature Process Cooling Excellent operating temperature range and precise control capabilities enable tight control with single chiller or series configuration. Ice/Thermal Storage Specifiers and operators benefit from dual setpoint control and industry-leading temperature, efficiency, and control capabilities, plus outstanding support through partnership with Calmac, a strong Trane partner providing proven installation examples, templates, and references that minimize design time and energy costs. Heat Recovery Maximum condenser temperature exceeds those of previous technologies, providing hot water and tight control that minimizes operating costs for the chilled water plant and boiler/hot water heater, and consistent dehumidification. Simple, Economical Installation Compact size makes the model RTHD well suited for the retrofit and replacement market. All units fit through standard doublewidth doors. Bolt-together construction makes for fast, easy unit disassembly. Small RTHD footprint saves valuable equipment room space and alleviates access concerns for most retrofit jobs. Lightweight design simplifies rigging requirements, further reducing installation time requirements and costs. Full factory refrigerant or nitrogen and oil charges reduce required field labor, materials, and installation cost. Only evaporator and condenser water piping is required; no starter water cooling (with its associated safety concerns) or field piping is necessary. Oil cooler and purge system connections have been eliminated. Simple power connection simplifies overall installation. Standard unit-mounted starter for Wye-Delta and Solid State eliminates additional jobsite installation considerations and labor requirements. Trane has conducted extensive factory testing, and also offers options for inperson and/or documented system performance verification. CH530 controls easily interface with Tracer Summit building automation systems through single twisted-pair wire. 4 Pueblo Business Unit

5 Features and Benefits State-of-the-Art, Precision Control Microprocessor-based CH530 controls monitor and maintain optimal operation of the chiller and its associated sensors, actuators, relays, and switches, all of which are factoryassembled and extensively tested. Easy interface with computers hosting Tracer Summit building automation/ energy management systems allows the operator to efficiently optimize comfort system performance and minimize operating costs. PID (proportional integral derivative) control strategy ensures stable, efficient chilled water temperature control, maintaining +/- 1 F (0.56 C) control by proactively reacting to instantaneous load changes of up to 50 percent. Adaptive Control attempts to maintain chiller operation under adverse conditions, when many other chillers might simply shut down. Easy-to-use operator interface displays all operating and safety messages, with complete diagnostics information, on a highly readable panel with a scrolling touch-screen display. The RTHD features a complete range of chiller safety controls. Over 120 diagnostic and operating points are available, with standard displays including chiller current draw, condenser pressure, and evaporator pressure. Reliability and Ease of Maintenance Direct drive, low-speed compressor a simple design with only three moving parts provides maximum efficiency, high reliability, and low maintenance requirements. Electronic expansion valve, with fewer moving parts than alternative valve designs, offers highly reliable operation. Suction gas-cooled motor stays uniformly cool at lower temperatures for longer motor life. The Trane helical rotary compressor is a proven design resulting from years of research and thousands of test hours, including extensive testing under extraordinarily severe operating conditions. Trane is the world s largest manufacturer of large helical rotary compressors, with tens of thousands of commercial and industrial installations worldwide demonstrating a reliability rate of greater than 99 percent in the first year of operation. Operating and Life Cycle Cost-Effectiveness Electronic expansion valve enables exceptionally tight temperature control and extremely low superheat, resulting in more efficient full-load and part-load operation than previously available. Precise compressor rotor tip clearance ensures optimal efficiency. Condenser and evaporator tubes use the latest heat transfer technology for increased efficiency. The RTHD includes standard electrical demand limiting. Chilled water reset based on return water temperature is standard. High compressor lift capabilities and tight chilled water temperature control allow highly efficient system design with minimal operational concerns. Design capabilities include: variable primary flow; series chiller arrangements for evaporator and/or condenser; low evaporator and condenser flow. 5

6 Options Model RTHD Options Insulation All low temperature surfaces are covered with factory installed 3/4 inch (19.05 mm) Armaflex II or equal (k=0.28) insulation, including the evaporator and water boxes, suction line, and motor housing. 3/8" foam insulation is used on the liquid level sensor and gas pump assembly, including piping. Low-Temperature Evaporator Addition of an oil cooler to the oil circuit enables evaporator operation down to minimum leaving water temperature of 10 F (-12.2 C). High-Temperature Condenser Addition of an oil cooler to the oil circuit enables condenser operation up to maximum leaving water temperature of 114 F (45.6 C). Smooth-Bore Condenser Tubes Smooth-bore copper or premium cupronickel condenser tubes, 3/4" (19.05 mm) in diameter with.035" (0.889 mm) wall thickness, are available for high fouling water applications. Refrigerant Isolation Valves Factory-installed condenser inlet and outlet refrigerant valves allow isolation of the full refrigerant charge in the condenser while servicing the chiller. Marine Water Boxes Addition of marine water boxes for the condenser allows tube cleaning without water pipe interference. 300 psig Evaporator and Condenser Water Boxes Water boxes are designed for 300 psig maximum waterside working pressure, and grooved pipe water connections are provided for ease of installation. Tracer Summit Communications Link to factory-installed, tested communication board, via single twisted-pair wiring, adds Tracer Summit communications to the system. LonTalk LCI-C Interface LonTalk (LCI-C) communications capabilities are available, with communication link via single twistedpair wiring to factory-installed, tested communication board. External Chilled Water Setpoint External Chilled Water Setpoint is communicated to a factory-installed, tested communication board through a 2-10Vdc or 4-20mA signal. External Current Limiting External Current Limit Setpoint is communicated to a factory-installed, tested communication board through a 2-10Vdc or 4-20mA signal. External Base Loading External Base Loading is communicated to a factory-installed and tested communication board through a 2-10Vdc or 4-20mA signal. Ice Making Control Controls and safeties allow operation with brine temperatures down to 20 F (-6.7 C), and dual setpoints enable both ice making and daytime comfort cooling. Programmable Relays Default-set, factory-installed, programmable relays allow the operator to select four relay outputs from a list of eight. Available relays are: Alarm- Latching, Alarm-Auto Reset, General Alarm, Warning, Chiller Limit Mode, Compressor Running, Head Pressure Relief Request, and Tracer Control. Chilled Water Reset Outdoor Air Temperature Controls, sensors, and safeties allow reset of chilled water temperature, based on temperature signal, during periods of low outdoor air temperature (chilled water reset based on return chilled water temperature is standard). Condenser-Regulating Valve Control Chiller applies a Proportional Integrative Control (PID) algorithm to control water regulating valve via 0-10Vdc signal. Percent of Full Run Load Amps Output Control system indicates the active chiller percent of full run load amps, based on a 0-10Vdc signal. Condenser Pressure Output Control system indicates chiller differential pressure or condenser pressure, based on a 0-10Vdc signal. Refrigerant Monitor Input Control system indicates refrigerant monitor status of or ppm (user selectable), based on a 2-10Vdc / 4-20 ma signal. Solid State Starter Solid State Starter is unit-mounted with a NEMA 1 gasketed enclosure. To extend starter life, contactors bypass current from the silicon control rectifiers (SCRs) after startup. Under/Over-Voltage Protection Unit receives protection against variations in voltage (current lag and spike protection is standard). 6

7 Options Main Power Disconnect Options: Non-fused Disconnect A UL-approved non-fused molded case disconnect switch, factory pre-wired with terminal block power connections and equipped with a lockable external operator handle, is available to disconnect the chiller from main power. Standard Interrupting Capacity Circuit Breaker A UL-approved standard interrupting molded case capacity circuit breaker, factory pre-wired with terminal block power connections and equipped with a lockable external operator handle, is available to disconnect the chiller from main power. High Interrupting Capacity Circuit Breaker A UL-approved high interrupting molded case capacity circuit breaker, factory pre-wired with terminal block power connections and equipped with a lockable external operator handle, is available to disconnect the chiller from main power. Ground Fault Circuit Breaker A UL-approved standard interrupting molded case capacity circuit breaker with ground fault interrupting capability, factory pre-wired with terminal block connections and equipped with a lockable external operator handle, is available to disconnect the chiller from main power. More Options: 2-Way Condenser Water Regulating Valve For water regulation, a field-installed, 2-way butterfly-type (lug-style) valve, with integral electrical operator and factory-mounted valve actuator, is available. The single-phase, reversible motor can be factory-wired for 115 VAC, 60 Hz or 220 VAC, 50 Hz; the 2-way valve is field-wired and controlled by the chiller regulating valve control output; valves are available in 6" and 8" (152.4 and mm) sizes. Nitrogen Charge Unit is shipped with a nitrogen holding charge in lieu of refrigerant. Seal Kit for Reassembly Ideal for situations when the bolttogether construction of the RTHD will be separated for installation, this seal kit provides replacement gaskets and rings for reassembly. Performance and Witness Tests ARI-certified RTHD Performance and Witness Tests are available, based on requested operating points, to certify chiller performance before delivery. 7

8 Display LCD Touch-Screen Display with Multi-Language Support The standard DynaView display provided with the CH530 control panel features an LCD touch-screen, allowing access to all operational inputs and outputs. This display supports eleven languages: English, Chinese, Dutch, French, German, Italian, Japanese, Korean, Portugese, Spanish and Thai. Additional Display Features Include: LCD touch-screen with LED backlighting, for scrolling access to input and output operating information Weather-proof enclosure for reliable operation in non-standard indoor environments Spin value buttons to allow continuously variable setpoints when applicable Radio and action buttons for easy, onetime actions and settings Single-screen, folder/tab-style display of all available information on individual components (evaporator, condenser, compressor, etc.) Automatic and immediate stop capabilities for standard or immediate manual shutdown Manual override indication Password entry/lockout system to enable or disable display Fast, easy access to available chiller data in tabbed format, including: Modes of operation, including normal cooling and icemaking Water temperatures and setpoints Loading and limiting status and setpoints Average line current Outdoor air temperature Start/stop differential timers Auto/Manual mode for EXV, slide valve, and head pressure control Pump status and override Chilled water reset, start point, ratio, and outdoor start point External setpoints, including: - chilled water - current limit - ice building - base loading Display specifics, including: - date - format - time - display lockout - display units - language setting - Reports, listed on a single tabbed screen for easy access, including: ASHRAE, containing all guideline 3 report information Evaporator Condenser Compressor Evaporator, condenser, and compressor reports containing all operational information on individual components, including: - Water and air temperatures - Refrigerant levels, temperatures, and approach - Oil pressure - Flow switch status - EXV position - Head pressure control command - Compressor starts and run-time - Line phase percent RLA, amps, and volts Alarm and diagnostic information, including: - Flashing alarms with touch-screen button for immediate address of alarm condition - Scrollable list of last ten active diagnostics - Specific information on applicable diagnostic from list of over onehundred - Automatic or manual resetting diagnostic types 8

9 Application Considerations Condenser Water Temperatures Reduced sensitivity to condenser water startup temperatures is one major enhancement in the newest-generation water-cooled Series R chiller. With the model RTHD chiller, a condenser water control method is necessary only if the unit starts with entering water temperatures below 55 F (12.8 C), or between 45 F (7.2 C) and 55 F (12.8 C), when a temperature increase of 1 F (0.56 C) per minute to 55 F (12.8 ) is not possible. When the application requires startup temperatures below the prescribed minimums, a variety of options are available. To control a 2-way or 3-way valve, Trane offers a Condenser Regulating Valve Control option for the CH530 controls. This option enables the CH530 controls to send a signal for opening and closing the valve as necessary to maintain chiller differential pressure. The 2-way valves are available as a ship-with option. Tower bypass is also a valid control method if the chiller temperature requirements can be maintained. Trane Series R chillers start and operate successfully and reliably over a range of load conditions with controlled entering condenser water temperature. Reducing the condenser water temperature is an effective method of lowering chiller power input required, but the ideal temperature for optimizing total system power consumption will depend on the overall system dynamics. From a system perspective, some improvements in chiller efficiency may be offset by the increased tower fan and pumping costs required to achieve the lower tower temperatures. Contact your local Trane systems solution provider for more information on optimizing system performance. The minimum acceptable refrigerant pressure differential between condenser and evaporator is 23 psid. The chiller control system will attempt to obtain and maintain this differential at startup, but for continuous operation a design should maintain a 25 F (13.9 C) differential from evaporator leaving water temperature to condenser leaving water temperature. Variable Evaporator Flow and Short Evaporator Water Loops Variable evaporator flow is an energysaving design strategy which has quickly gained acceptance as advances in chiller and controls technology have made it possible. With its linear unloading compressor design and advanced CH530 controls, the RTHD has excellent capability to maintain leaving water temperature control within +/-0.5 F (0.28 C), even for systems with variable evaporator flow and small chilled water volumes. Some basic rules should be followed whenever using these system design and operational savings methods with the RTHD. The proper location of the chilled water temperature control sensor is in the supply (outlet) water. This location allows the building to act as a buffer, and it assures a slowly changing return water temperature. If there is insufficient water volume in the system to provide an adequate buffer, temperature control can be lost, resulting in erratic system operation and excessive compressor cycling. To ensure consistent operation and tight temperature control, the chilled water loop should be at least two minutes. If this recommendation cannot be followed, and tight leaving water temperature control is necessary, a storage tank or larger header pipe should be installed to increase the volume of water in the system. For variable primary flow applications, the rate of chilled water flow change should not exceed 10 percent of design per minute to maintain +/-0.5 F (0.28 C) leaving evaporator temperature control. For applications in which system energy savings is most important and tight temperature control is classified as +/-2 F (1.1 C), up to 30 percent changes in flow per minute are possible. Flow rates should be maintained between the minimum and maximum allowed for any particular chiller configuration. 9

10 Application Considerations Series Chiller Arrangements Another energy-saving strategy is to design the system around chillers arranged in series, on the evaporator, condenser, or both. The actual savings possible with such strategies depends on the application dynamics and should be researched by consulting your Trane Systems Solutions Representative and applying the Trane System Analyzer program. It is possible to operate a pair of chillers more efficiently in a series chiller arrangement than in a parallel arrangement. It is also possible to achieve higher entering-to-leaving chiller differentials, which may, in turn, provide the opportunity for lower chilled water design temperature, lower design flow, and resulting installation and operational cost savings. The Trane screw compressor also has excellent capabilities for lift, which affords an opportunity for savings on the evaporator and condenser water loops. Like series arrangements on the evaporator, series arrangements on the condenser may enable savings. This approach may allow reductions in pump and tower installation and operating costs. Maximizing system efficiency requires that the designer balance performance considerations for all system components; the best approach may or may not involve multiple chillers, or series arrangement of the evaporators and/or condensers. This ideal balance of design integrity with installation and operating cost considerations can also be obtained by consulting a Trane representative and applying the Trane System Analyzer program. Water Treatment The use of untreated or improperly treated water in chillers may result in scaling, erosion, corrosion, and algae or slime buildup. It is recommended that the services of a qualified water treatment specialist be engaged to determine what treatment, if any, is advisable. Trane assumes no responsibility for the results of using untreated or improperly treated water. Water Pumps Where noise limitation and vibration-free operation are important, Trane strongly encourages the use of 1750-rpm (60 Hz), 1450-rpm (50 Hz) pumps. Specifying or using 3600-rpm (60 Hz), 3000-rpm (50 Hz) condenser water and chilled water pumps must be avoided, because such pumps may operate with objectionable levels of noise and vibration. In addition, a low frequency beat may occur due to the slight difference in operating rpm between 3600-rpm (60 Hz), 3000-rpm (50 Hz) water pumps and Series R chiller motors. Important Note: The chilled water pump must not be used to stop the chiller. Acoustic Considerations For chiller sound ratings, installation tips, and considerations on chiller location, pipe isolation, etc., refer to the Trane Water-Cooled Series R Chillers Sound Ratings and Installation Guide. Using the information provided in this bulletin, contact a certified sound consultant to aid in proper mechanical room design and treatment. 10

11 Selection Procedure Trane Series R chiller performance is rated in accordance with the ARI Standard 550/ Certification Program. Chiller selection assistance and performance information can be obtained by using the Series R chiller selection program, available through local Trane sales offices. Performance The computerized Series R chiller selection program provides performance data for each possible chiller selection at both full-load and part-load design points, as required. It should be noted that changing the number of water passes or the water flow rates will generally alter the performance of a particular chiller. To attain maximum benefit from the wide range of chiller models and options available, designers are encouraged to first develop performance specifications and then use the chiller selection program to optimize all selections. This will help ensure selection of the compressor-evaporator-condenser combination that most closely meets the job requirements. To optimize system performance, all selections should also be balanced with other system components. Fouling Factors ARI Standard 550 includes a definition of clean tube fouling. The recommended standard fouling adjustments are hr-sq ft-deg F/Btu (0.044 sq m-deg C/kW) for the evaporator and hr-sq ft deg F/Btu ( sq m-deg C/kW) for the condenser, from an increment of clean. Chiller specifications should be developed using the most current standard fouling factors. Unit Performance with Fluid Media Other Than Water Series R chillers can be provided with a wide variety of fluid media other than water, including ethylene glycol and propylene glycol in the evaporator, condenser or both. Chillers using media other than water are excluded from the ARI 550/ Certification Program, but are rated in accordance with ARI Standard 550/ Trane factory performance tests are only performed with water as the cooling and heatrejection media. When considering selection of media other than water, contact the local Trane sales office for chiller selections and factory performance testing information. Fluid media other than water lowers the heat transfer coefficient, and therefore reduces chiller performance. In general, it is good practice to hold the percent glycol added to within the minimum allowed by the Trane selection program, based on either (a) unit operating temperatures, or (b) the operating temperatures the evaporator or condenser water will experience under its full range of conditions. Adding more glycol than required for the specific application is equivalent to selecting a less efficient chiller. Lower-viscosity glycols such as ethylene will have less adverse impact on chiller performance than higher-viscosity glycols such as propylene. Dimensional Drawings Dimensional drawings provided for selection purposes illustrate overall measurements of the unit. The recommended service clearances are those required to easily service the Series R chiller. All catalog dimensional drawings are subject to change, and current submittal drawings should be referenced for more detailed dimensional information. Dimensional drawings are also available from the selection program. Contact the local Trane sales office for submittal information. Electrical Data Tables Compressor motor electrical data is provided in the data section for each compressor size. Rated load amperes (RLA), locked rotor wye amperes (LRA) and expected inrush for the Wye-delta and Solid State Starter configurations are shown. Although the terms LRA and expected inrush are often used interchangeably, the distinction applied here is that LRA is the rated inrush for the motor, but expected inrush is that allowed by the starter, based on the specific configuration. Selecting starters in the Wye-delta or Solid State configuration lowers expected inrush vs. the Delta (or acrossthe-line ) configuration. A Solid State Starter configuration lowers the expected inrush by approximately 50 percent, while Wye-Delta lowers it by approximately 66 percent. 11

12 Selection Procedure The RLA is based on the motor s performance when reaching full rated horsepower. The kw rating of the motor will equal or exceed the kw requirement indicated by the Series R computer selection program at design conditions. If motor kw draw at design conditions is less than the kw rating of the motor, the RLA at design conditions is determined by multiplying the motor RLA (at the desired voltage) by this ratio: design kw/ motor kw rating. This calculation is performed within the Series R chiller computer selection program, making RLA available as part of the design predictions. Predicted values include power factor variation from point to point. A voltage utilization range is tabulated for each voltage listed. Series R chillers are designed to operate satisfactorily over a utilization range of ±10 percent of the standard design voltages: (a) 200 V, 230 V, 380 V, 460 V, and 575 V for 60 Hertz, 3-phase, and (b) 380 V, 400 V, 415 V for 50 Hertz, 3-phase. Evaporator and Condenser Pressure Drop Pressure drop data is determined by the Series R chiller computer selection program available through local Trane sales offices. Part Load Performance Actual air-conditioning system loads are frequently less than full-load design conditions. Depending on the number of chillers on the job and the load profile, chillers may operate at full load a small percentage of the time. With their excellent part-load performance characteristics and highly energyefficient operation, Series R chillers can provide significant operating savings at these part-load conditions. System Considerations Part-load chiller operation is frequently associated with reduced condenser water temperatures. However, rather than focusing only on the chiller, it is important to balance these temperatures to achieve the most efficient system operation possible. At part-load operation, the heat rejected to the cooling tower is less than at full-load operation. Part-load chiller operation is also typically associated with reduced outside wet bulb temperatures, resulting in improved cooling tower performance. The net result of reduced heat rejection and lower wet bulb temperatures can be cooler condenser water entering the chiller, ultimately improving unit performance. However, this does not improve pump or tower efficiency. To achieve the most efficient system operation possible, it is best to minimize the total power draw of the chiller, tower, and pumps, which may not mean limiting the condenser water temperature to what the tower can provide. To determine specific unit and system part-load performance for chiller selection purposes, use the Series R chiller computer selection program or contact the local Trane sales office. 12

13 Model Nomenclature RTH D U D 2 F 0 A0 U A G 3 A 4 L A L G 3 F 2 L A L 1,2, , Digits 01, 02, 03 Series R RTH = Series R Digit 04 Dev Sequence D = 4th Major Development Digit 05 Design Control U = WCBU Digit 06 Compressor Frame B = B Compressor C = C Compressor D = D Compressor E = E Compressor Digit 07 Compressor Capacity 1 = Smaller Capacity for Frame 2 = Larger Capacity for Frame 3 = 50Hz Capacity Digit 08 Unit Power Supply A = 200V/60Hz/3Ph power C = 230V/60Hz/3Ph power D = 380V/60Hz/3Ph power R = 380V/50Hz/3Ph power T = 400V/50Hz/3Ph power U = 415V/50Hz/3Ph power F = 460V/60Hz/3Ph power H = 575V/60Hz/3Ph power Digit 09 Specials X = No specials C = All specials denoted by digits elsewhere S = Uncategorized special not denoted by other digits Digits 10, 11 Design Sequence ** = First Design, etc. increment when parts are affected for service purposes Digit 12 Agency Listing X = No agency listing U = C/UL Digit 13 Pressure Vessel Code A = ASME L = Chinese Pressure Vessel Code Digit 14 Evaporator Frame B = B Frame C = C Frame D = D Frame E = E Frame F = F Frame G = G Frame Digit 15 Evaporator Capacity 1 = Tube count #1 2 = Tube count #2 3 = Tube count #3 4 = Tube count #4 5 = Tube count #5 6 = Tube count #6 Digit 16 Evaporator Tube Type A = Enhanced Fin Copper Digit 17 Evaporator Water Pass Configuration 2 = 2 pass 3 = 3 pass 4 = 4 pass Digit 18 Evaporator Water Connection L = Left Hand Evaporator Connection R = Right Hand Evaporator Connection Digit 19 Evaporator Connection Type A = Standard Grooved Pipe Digit 20 Evaporator Waterside Pressure L = 150 psi H = 300 psi Digit 21 Condenser B = B Frame D = D Frame E = E Frame F = F Frame G = G Frame Digit 22 Condenser Capacity 1 = Tube count #1 2 = Tube count #2 3 = Tube count #3 4 = Tube count #4 5 = Tube count #5 Digit 23 Condenser Tube Type A = Enhanced Fin Copper B = Smooth Bore Copper C = Smooth Bore 90/10 CU/NI Digit 24 Condenser Passes 2 = 2 Pass Digit 25 Condenser Water Connection L = Left Hand Connection R = Right Hand Connection Digit 26 Condenser Connection Type A = Standard Grooved Pipe C = Marine Digit 27 Condenser Waterside Pressure L = 150 psi H = 300 psi 13

14 Model Nomenclature A V X Q X E X A A B D Y 444 D A X A 4 X X X R X V X ,41, Digit 28 Condenser Leaving Water Temperature A = Standard Digit 29 Refrigerant Specialties X = No Refrigerant Isolation Valves V = With Refrigerant Isolation Valves Digit 30 Oil Cooler X = Without Oil Cooler C = With Oil Cooler Digit 31 Thermal Insulation X = No Insulation Q = Factory Installed Insulation Digit 32 Acoustic Insulation X = No Insulation A = Standard Insulation Digit 33 Control, Label, and Literature Language E = English Digit 34 Safety Devices X = Standard Digit 35 Factory Charge A = Factory Refrigerant Charge (134a) B = Factory Nitrogen Charge Digit 36 Shipping Package A = Domestic - No Skid (standard) B = Domestic - Shrink Wrap C = Domestic - Skid D = Domestic - Skid + Shrink Wrap H = China - No Skid (standard) K = China - Skid L = China - Shrink Wrap M = China - Skid + Shrink Wrap J = Special Digit 37 Flow Switch X = No Flow Switch A = Evaporator (NEMA 1) B = Evaporator and Condenser (NEMA 1) C = Evaporator (Vapor Proof) D = Evaporator and Condenser (Vapor Proof) Digit 38 Factory Test X = Standard Test C = Witness Test D = Performance Test Digit 39 Starter Type Y = Wye Delta Closed Transition Starter A = Solid State Starter Digits 40, 41, 42 Design RLA (for starter) *** = Selection Assigned Digit 43 Power Line Connection Type A = Terminal Blocks B = Mechanical Disconnect Switch D = Circuit Breaker F = High Interrupt Circuit Breaker H = Ground Fault Circuit Breaker J = Ground Fault High Interrupt Circuit Breaker Digit 44 Enclosure Type A = NEMA 1 Digit 45 Under/Over Voltage Protection X = None U = With Under/Over Voltage Protection Digit 46 Operator Interface Language A = Dyna-View/English B = Dyna-View/French C = Dyna-View/Italian D = Dyna-View/Spanish E = Dyna-View/German F = Dyna-View/Dutch G = Dyna-View/Traditional Chinese H = Dyna-View/Simple Chinese J = Dyna-View/Japanese K = Dyna-View/Portuguese L = Dyna-View/Korean M = Dyna-View/Thai Digit 47 Digital Communication Interface X = None 4 = Tracer Interface 5 = LCI-C (LonTalk) Digit 48 External Chilled Water and Current Limit Setpoint X = None 4 = 4-20mA input 2 = 2-10Vdc Digit 49 External Base Loading X = None 4 = 4-20mA input 2 = 2-10Vdc input Digit 50 Icemaking X = None A = Icemaking with Relay B = Icemaking without Relay Digit 51 Programmable Relays X = None R = With Digit 52 Chilled Water Reset X = Chilled Water Reset Return Water T = Chilled Water Reset Outdoor Air Temperature Digit 53 Control Outputs X = None V = Condenser Regulating Valve Control & Percent RLA P = Condenser Pressure (% HPC) & Percent RLA D = Chiller Differential Pressure & Percent RLA Digit 54 Refrigerant Monitor Input X = None A = 100 ppm / 4-20mA B = 1000 ppm / 4-20mA C = 100 ppm / 2-10Vdc D = 1000 ppm / 2-10Vdc 14

15 General Data Nominal Data Nominal Compressor B1 B2 C1 C2 D1 D2 D3 E3 Tonnage (60 Hz) N/A N/A Tonnage (50 Hz) Notes: 1. Chiller selections can be optimized through the use of the ARI-Certified Series R selection program and by contacting your local Trane sales office. General Data Evaporator Condenser Refrigerant Compressor Evaporator Condenser Water Storage Water Storage Refrigerant Charge Code Code Code Gallons Liters Gallons Liters Type lb kg B1 B1 B HFC-134a B1 C1 D HFC-134a B2 B2 B HFC-134a B2 C2 D HFC-134a C1 D6 E HFC-134a C1 D5 E HFC-134a C1 E1 F HFC-134a C2 D4 E HFC-134a C2 D3 E HFC-134a C2 F2 F HFC-134a D1 D1 E HFC-134a D1 F1 F HFC-134a D1 G2 G HFC-134a D2/D3 D2 E HFC-134a D2/D3 F2 F HFC-134a D2/D3 G3 G HFC-134a E3 D2 E HFC-134a E3 F2 F HFC-134a E3 G3 G HFC-134a

16 General Data Water Flow Rates 16 Minimum/Maximum Evaporator Flow Rates (Gallons/Minute ) Two Pass Three Pass Four Pass Evaporator Nominal Nominal Nominal Code Min Max Conn Size (In.) Min Max Conn Size (In.) Min Max Conn Size (In.) B B C C D D D D D D E F F G G G Notes: 1. Minimum flow rates are based on water only. 2. All water connections are grooved pipe. Minimum/Maximum Evaporator Flow Rates (Liters/Second) Two Pass Three Pass Four Pass Evaporator Nominal Nominal Nominal Code Min Max Conn Size (mm) Min Max Conn Size (mm) Min Max Conn Size (mm) B B C C D D D D D D E F F G G G Notes: 1. Minimum flow rates are based on water only. 2. All water connections are grooved pipe. Minimum/Maximum Condenser Flow Rates (Gallons/Minute) Two Pass Condenser Nominal Code Min Max Conn Size (In.) B B D D E E E E E F F F G G G Notes: 1. Minimum flow rates are based on water only. 2. All water connections are grooved pipe. Minimum/Maximum Condenser Flow Rates (Liters/Second) Two Pass Condenser Nominal Code Min Max Conn Size (mm) B B D D E E E E E F F F G G G Notes: 1. Minimum flow rates are based on water only. 2. All water connections are grooved pipe.

17 General Data Brine Flow Rates Minimum/Maximum Evaporator Flow Rates (GPM) Two Pass Three Pass Four Pass Evaporator Nominal Nominal Nominal Code Min Max Conn Size (In.) Min Max Conn Size (In.) Min Max Conn Size (In.) B B C C D D D D D D E F F G G G Notes: 1. Minimum flow rates are based on brine solution. 2. All water connections are grooved pipe. Minimum/Maximum Evaporator Flow Rates (Liters/Second) Two Pass Three Pass Four Pass Evaporator Nominal Nominal Nominal Code Min Max Conn Size (mm) Min Max Conn Size (mm) Min Max Conn Size (mm) B B C C D D D D D D E F F G G G Notes: 1. Minimum flow rates are based on brine solution. 2. All water connections are grooved pipe. Minimum/Maximum Condenser Flow Rates (GPM) Two Pass Condenser Nominal Code Min Max Conn Size (In.) B B D D E E E E E F F F G G G Notes: 1. Minimum flow rates are based on brine solution. 2. All water connections are grooved pipe. Minimum/Maximum Condenser Flow Rates (Liters/Second) Two Pass Condenser Nominal Code Min Max Conn Size (mm) B B D D E E E E E F F F G G G Notes: 1. Minimum flow rates are based on brine solution. 2. All water connections are grooved pipe. 17

18 Electrical Data and Connections 18

19 Electrical Data and Connections 19

20 Electrical Data and Connections Compressor Motor Electrical Data (60 Hertz) Nominal Voltage Compressor Voltage 180/ 208/ 342/ 414/ 516/ Code Utilization Range Max kw B1, B2 Max kw LRAY LRAD Max kw C1, C2 Max kw LRAY LRAD Max kw D1, D2 Max kw LRAY LRAD Notes: 1. See Selection Procedure Section for details. 2. The Max kw is based on the performance of the motor developing full rated horsepower. 3. Electrical component sizing should be based on actual jobsite operating conditions. This factor can be obtained through the use of the Series R chiller selection program available through local Trane sales offices. Compressor Motor Electrical Data (50 Hertz) Nominal Voltage Compressor Voltage 342/ 360/ 374/ Code Utilization Range Max kw B1, B2 Max kw LRAY LRAD Max kw C1, C2 Max kw LRAY LRAD Max kw D1, D2, D3 Max kw LRAY LRAD Max kw E3 Max kw LRAY LRAD Notes: 1. See Selection Procedure Section for details. 2. The Max kw is based on the performance of the motor developing full rated horsepower. 3. Electrical component sizing should be based on actual jobsite operating conditions. This factor can be obtained through the use of the Series R chiller selection program available through local Trane sales offices. Electrical Connections Starter Panel Selection Lug Size Connection RLA L1-L3 (Each Phase) Terminals Only (2) #4-500 MCM (4) 4/0-500 MCM Main Circuit (1) #4-350 MCM Breaker or (2) 2/0-250 MCM Non-Fused (2) 3/0-350 MCM Disconnect Switch (2) #1-500 MCM (4) 4/0-500 MCM Note: 1. Lug sizes are independent of starter type. 20

21 Dimensions and Weights Shipping and Operating Weights Compressor Evaporator Condenser Operating Weight Shipping Weight Code Code Code (lbs) (kg) (lbs) (kg) B1 B1 B , ,215 B1 C1 D , ,462 B2 B2 B , ,265 B2 C2 D , ,515 C1 D6 E , ,797 C1 D5 E , ,884 C1 E1 F , ,676 C2 D4 E , ,884 C2 D3 E , ,351 C2 F2 F , ,334 D1 D1 E , ,551 D1 F1 F , ,342 D1 G2 G , ,667 D2, D3 D2 E , ,605 D2, D3 F2 F , ,629 D2, D3 G3 G , ,849 E3 D2 E , ,677 E3 F2 F , ,691 E3 G3 G , ,914 Notes: 1. All weights +- 3%. 2. Shipping weights include standard 150 psig water boxes, refrigerant charge, and oil charge. 3. Operating weights include refrigerant, oil, and water charges. 21

22 Dimensions and Weights BBB Configuration Recommended Clearances Front Back Either End Other End* 108" (2743 mm) Top * Clearance for tube removal Note: 1. Dimensions are based on 3 Pass Evap / 2 Pass Cond and LH/LH water connections. Refer to submittals for exact configuration. 2. Refer to the Nominal Capacity Data table in the General Data section for capacity ranges of each compressor. 22

23 Dimensions and Weights BCD Configuration Recommended Clearances Front Back Either End Other End* 126" (3200 mm) Top * Clearance for tube removal Note: 1. Dimensions are based on 3 Pass Evap / 2 Pass Cond and LH/LH water connections. Refer to submittals for exact configuration. 2. Refer to the Nominal Capacity Data table in the General Data section for capacity ranges of each compressor. 23

24 Dimensions and Weights CDE, DDE, EDE Configuration Recommended Clearances Front Back Either End Other End* 108" (2743 mm) Top * Clearance for tube removal Note: 1. Dimensions are based on 3 Pass Evap / 2 Pass Cond and LH/LH water connections. Refer to submittals for exact configuration. 2. Refer to the Nominal Capacity Data table in the General Data section for capacity ranges of each compressor. 24

25 Dimensions and Weights CEF Configuration Recommended Clearances Front Back Either End Other End* 126" (3200 mm) Top * Clearance for tube removal Note: 1. Dimensions are based on 3 Pass Evap / 2 Pass Cond and LH/LH water connections. Refer to submittals for exact configuration. 2. Refer to the Nominal Capacity Data table in the General Data section for capacity ranges of each compressor. 25

26 Dimensions and Weights CFF, DFF, EFF Configuration Recommended Clearances Front Back Either End Other End* 126" (3200 mm) Top * Clearance for tube removal Note: 1. Dimensions are based on 3 Pass Evap / 2 Pass Cond and LH/LH water connections. Refer to submittals for exact configuration. 2. Refer to the Nominal Capacity Data table in the General Data section for capacity ranges of each compressor. 26

27 Dimensions and Weights DGG, EGG Configuration Recommended Clearances Front Back Either End Other End* 126" (3200 mm) Top * Clearance for tube removal Note: 1. Dimensions are based on 3 Pass Evap / 2 Pass Cond and LH/LH water connections. Refer to submittals for exact configuration. 2. Refer to the Nominal Capacity Data table in the General Data section for capacity ranges of each compressor. 27

28 Mechanical Specifications General Exposed metal surfaces are painted with air-dry beige, direct-to-metal, singlecomponent paint. Each unit ships with full operating charges of refrigerant and oil. Molded neoprene isolation pads are supplied for placement under all support points. Startup and operator instruction by factory-trained service personnel are included. Compressor and Motor The unit is equipped with a semihermetic, direct-drive, 3600-rpm ( Hz) rotary compressor that includes a capacity control slide valve, oil sump heater, and differential pressure refrigerant oil flow system. Four pressure-lubricated, rolling-element bearing groups support the rotating assembly. The motor is a suction gas-cooled, hermetically sealed, two-pole, squirrel cage induction-type. Evaporator and Condenser Shells are carbon steel plate. The evaporator and condenser are designed, tested, and stamped in accordance with ASME Code for refrigerant-side/ working-side pressure of 200 psig. All tube sheets are made of carbon steel; tubes are mechanically expanded into tube sheets and mechanically fastened to tube supports. Evaporator tubes are 1.0-inch (25.4 mm) diameter and condenser tubes are 0.75-inch (19.05 mm) diameter. Both types can be individually replaced. Standard tubes are externally finned, internally enhanced seamless copper with lands at all tube sheets. All water pass arrangements are available with grooved connections (150 or 300 psig waterside). All connections may be either right- or left-handed. Waterside shall be hydrostatically tested at 1.5X design working pressure. Refrigerant Circuit An electronically controlled expansion valve is provided to maintain proper refrigerant flow. Unit Controls (CH530) The microprocessor-based control panel is factory-installed and factory-tested. The control system is powered by a control power transformer, and will load and unload the chiller through adjustment of the compressor slide valve. Microprocessor-based chilled water reset based on return water is standard. The CH530 microprocessor automatically acts to prevent unit shutdown due to abnormal operating conditions associated with low evaporator refrigerant temperature, high condensing temperature, and/or motor current overload. If an abnormal operating condition continues and the protective limit is reached, the machine should shut down. The panel includes machine protection shutdown requiring manual reset for the following conditions: low evaporator refrigerant temperature and pressure high condenser refrigerant pressure low oil flow critical sensor or detection circuit faults motor current overload high compressor discharge temperature lost communication between modules electrical distribution faults: phase loss, phase imbalance, or phase reversal external and local emergency stop starter transition failure The panel also includes machine protection shutdown with automatic reset for the following correctable conditions: momentary power loss under/over voltage loss of evaporator or condenser water flow When a fault is detected, the control system conducts more than 100 diagnostic checks and displays results. The display will identify the fault, indicate date, time, and operating mode at time of occurrence, and provide type of reset required and a help message. The diagnostic history will display the last ten diagnostics with their times and dates of occurrence. Clear Language Display Panel Factory-mounted to the control panel door, the operator interface has an LCD touch-screen display for operator input and information output. This interface provides access to the following information: evaporator report, condenser report, compressor report, ASHRAE Guideline 3 report, operator settings, service settings, service tests, and diagnostics. All diagnostics and messages are displayed in clear language. 28

Series R Helical Rotary Liquid Chillers

Series R Helical Rotary Liquid Chillers Series R Helical Rotary Liquid Chillers Model RTHD 175-450 Tons (60 Hz) 125-450 Tons (50 Hz) Built for Industrial and Commercial Applications November 2006 Introduction To meet a wide range of applications

More information

Date: August 21, Proposal Number: G Engineer: Payment Terms: Net 30 Days

Date: August 21, Proposal Number: G Engineer: Payment Terms: Net 30 Days Proposal Trane A Division of American Standard Inc. Prepared For: John Weston Desmet Ballestra Job Name: LAUER1 Biodiesel Chiller Pennsylvania Date: August 21, 2006 Proposal Number: G1-95502-1 Engineer:

More information

Series R Helical Rotary Water-Cooled Liquid Chillers

Series R Helical Rotary Water-Cooled Liquid Chillers Product Catalog Series R Helical Rotary Water-Cooled Liquid Chillers Model 60-150 Tons - Made in USA January 2008 RLC-PRC029-EN Introduction To meet a wide range of applications in the 60 150 ton water-cooled

More information

RTHE Series R Helical Rotary Liquid Chiller Tons 60Hz

RTHE Series R Helical Rotary Liquid Chiller Tons 60Hz Features Product and Benefits Catalog RTHE Series R Helical Rotary Liquid Chiller 75-255 Tons 60Hz January 2015 RTHE-PRC002-EN Introduction To meet a wide range of applications in the 75~255 ton water-cooled

More information

Series R Helical Rotary Liquid Chillers

Series R Helical Rotary Liquid Chillers Product Catalog Series R Helical Rotary Liquid Chillers Model RTWD Water-Cooled Model RTUD Condenserless 235 835 kw RLC-PRC035-E4 Introduction To meet a wide range of applications in the 235-835 kw water-cooled

More information

Call us today! (800)

Call us today! (800) 500 TON AIR-COOLED CHILLER PA-ACCTR-500 Call us today! (800)341-4297 The 500-Ton portable chiller package features a Trane RTAC chiller unit. Trane leads the industry in providing some of the most reliable,

More information

Call us today! (800)

Call us today! (800) PA-ACCTR-200 Call us today! (800)341-4297 The 200-Ton portable chiller package features a Trane RTAC chiller unit. Trane leads the industry in providing some of the most reliable, efficient and quiet chiller

More information

Call us today! (800)

Call us today! (800) 150 TON AIR-COOLED CHILLER PA-ACCTR-150 Call us today! (800)341-4297 The 150-Ton portable chiller package features a Trane RTAC chiller unit. Trane leads the industry in providing some of the most reliable,

More information

100 TON AIR-COOLED SCROLL PACKAGED. Call us today! (800) SPECIFICATIONS GENERAL DIMENSIONS ELECTRICAL DATA ADDITIONAL INFORMATION

100 TON AIR-COOLED SCROLL PACKAGED. Call us today! (800) SPECIFICATIONS GENERAL DIMENSIONS ELECTRICAL DATA ADDITIONAL INFORMATION 100 TON AIR-COOLED SCROLL PACKAGED SPECIFICATIONS Call us today! (800)341-4297 Trane Portable Packaged Air Conditioner units contain the best compressor technology available, in order to achieve the highest

More information

C. ASME Compliance: Fabricate and label water chiller heat exchangers to comply with ASME Boiler and Pressure Vessel Code: Section VIII, Division 1.

C. ASME Compliance: Fabricate and label water chiller heat exchangers to comply with ASME Boiler and Pressure Vessel Code: Section VIII, Division 1. SECTION 236426 - ROTARY-SCREW WATER CHILLERS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes packaged, water cooled or air cooled as scheduled, electric-motor-driven, rotary-screw water chillers

More information

60 TON AIR-COOLED CHILLER. Call us today! (800) PA-ACCTR-60 GENERAL DIMENSIONS ELECTRICAL DATA 60 TON AIR-COOLED CHILLER FEATURES

60 TON AIR-COOLED CHILLER. Call us today! (800) PA-ACCTR-60 GENERAL DIMENSIONS ELECTRICAL DATA 60 TON AIR-COOLED CHILLER FEATURES 60 TON AIR-COOLED CHILLER PA-ACCTR-60 Call us today! (800)341-4297 The 60-Ton portable chiller package features a Trane CGAM chiller unit. Trane leads the industry in providing some of the most reliable,

More information

Series R Rotary Liquid Chiller

Series R Rotary Liquid Chiller Series R Rotary Liquid Chiller 70 to 125 Tons Water-Cooled and Condenserless Built For the Industrial and Commercial Markets November 1999 RLC-DS-4 Introduction Trane Series R Chiller Model RTWA The RTWA

More information

SECTION ROTARY-SCREW WATER CHILLERS

SECTION ROTARY-SCREW WATER CHILLERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Factory-assembled packaged chiller. B. Charge of refrigerant and oil. C. Controls and control connections. D. Chilled water connections. E. Electrical power connections.

More information

AquaStream Air-Cooled Liquid Chillers

AquaStream Air-Cooled Liquid Chillers Product Catalog AquaStream Air-Cooled Liquid Chillers Model CGAM 20 120 Tons - Made in USA December 2008 CG-PRC017-EN Introduction Design and manufacturing excellence makes Trane a leader in the air-cooled

More information

A. Air-conditioning and Refrigeration Institute (ARI) - Standard 550/590, latest edition, and ARI certification program.

A. Air-conditioning and Refrigeration Institute (ARI) - Standard 550/590, latest edition, and ARI certification program. 15684 ROTARY SCREW WATER CHILLERS ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 236423 An optional

More information

Submittal. Date: September 04, Customer P.O. Number: Customer Project Number:

Submittal. Date: September 04, Customer P.O. Number: Customer Project Number: Submittal Prepared For: All Bidders Sold To: Date: September 04, 2012 Customer P.O. Number: Customer Project Number: Job Number: Job Name: DCS 12473 80 Ton Chiller Dept of Wildlife 1801 N Lincoln OKLAHOMA

More information

Air-Cooled Scroll Chillers

Air-Cooled Scroll Chillers Product Catalog Air-Cooled Scroll Chillers Model CGAM - Made in USA 20 120 Nominal Tons (50 Hz and 60Hz) November 2009 CG-PRC017-EN Introduction Design and manufacturing excellence makes Trane a leader

More information

Water-Cooled Dual Compressor Screw Chiller

Water-Cooled Dual Compressor Screw Chiller Installation Manual IM 692-1 Group: Chiller Part Number: 629955 Effective: May 1997 Supersedes: IM663-1 IM683 IM692 Water-Cooled Dual Compressor Screw Chiller Installation Manual PFS 155C through PFS 210C,

More information

Product Catalog Series R Helical Rotary Liquid Chillers RLC-PRC040D-EN

Product Catalog Series R Helical Rotary Liquid Chillers RLC-PRC040D-EN Product Catalog Series R Helical Rotary Liquid Chillers 80 to 250 NominalTons Model RTWD Water-Cooled Made in USA (50 Hz) October 2016 RLC-PRC040D-EN Introduction Copyright To meet a wide range of applications

More information

SECTION CHILLERS

SECTION CHILLERS SECTION 15650 PART I - GENERAL 1.01 WORK INCLUDED A. Extent of work shall be as indicated on Drawings and provisions of this section, including schedules and equipment lists associated with either Drawings

More information

Product Catalog. Air-Cooled Scroll Chillers Model CGAM - Made in USA Nominal Tons (50 Hz and 60 Hz) CG-PRC017-EN.

Product Catalog. Air-Cooled Scroll Chillers Model CGAM - Made in USA Nominal Tons (50 Hz and 60 Hz) CG-PRC017-EN. Product Catalog Air-Cooled Scroll Chillers Model CGAM - Made in USA 20-130 Nominal Tons (50 Hz and 60 Hz) January 2012 CG-PRC017-EN Introduction Design and manufacturing excellence makes Trane a leader

More information

A. Air-conditioning and Refrigeration Institute (ARI) - Standard 550/590, latest edition, and ARI certification program.

A. Air-conditioning and Refrigeration Institute (ARI) - Standard 550/590, latest edition, and ARI certification program. 15682 CENTRIFUGAL WATER CHILLERS ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 236416 An optional

More information

60Hz. R134a HXWC SERIES. 205 to 560 Tons. Products That Perform...By People Who Care WATER-COOLED SEMI-HERMETIC SCREW COMPRESSOR WATER CHILLERS

60Hz. R134a HXWC SERIES. 205 to 560 Tons. Products That Perform...By People Who Care WATER-COOLED SEMI-HERMETIC SCREW COMPRESSOR WATER CHILLERS R Products That Perform...By People Who Care FORM NO: MS0455A WATER-COOLED SEMI-HERMETIC SCREW COMPRESSOR WATER CHILLERS R134a HXWC SERIES 205 to 560 Tons 60Hz INTRODUCTION Dunham-Bush's HXWC water cooled

More information

Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA

Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Page 236423-1 Copyright 2009 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant

More information

MACH N-407 Heat Pump Air-Cooled Chiller

MACH N-407 Heat Pump Air-Cooled Chiller MACH060-01-N-407 Heat Pump Air-Cooled Chiller Heat Pump Air-Cooled Chillers for Global Residential and Light Commercial Microclimates MACH NOMENCLATURE BREAKDOWN MACH-060-01 - N - 407 Refrigerant Type

More information

SECTION ROTARY SCREW WATER CHILLERS Vibration Isolation Pumping Equipment (HVAC) Induced Draft Cooling Tower

SECTION ROTARY SCREW WATER CHILLERS Vibration Isolation Pumping Equipment (HVAC) Induced Draft Cooling Tower SECTION 15684 ROTARY SCREW WATER CHILLERS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15240 - Vibration Isolation. 2. 15540 - Pumping Equipment (HVAC) 3. 15711 - Induced Draft Cooling Tower B.

More information

Series R Rotary Liquid Chiller 70 to 400 Tons Air-Cooled

Series R Rotary Liquid Chiller 70 to 400 Tons Air-Cooled RLC-DS-2 June1999 RLC-DS-2 Series R Rotary Liquid Chiller 70 to 400 Tons Air-Cooled Built For the Industrial and Commercial Markets 1 Features and Benefits Designed To Perform, Built To Last The Series

More information

Water-Cooled Modular Chillers. Product Data Catalog. Standard and Total Access Modules MS010X, MS015X, MS020X, MS030X, MS040X, MS050X, MS070X, MS085X

Water-Cooled Modular Chillers. Product Data Catalog. Standard and Total Access Modules MS010X, MS015X, MS020X, MS030X, MS040X, MS050X, MS070X, MS085X Product Data Catalog Standard and Total Access Modules MS010X, MS015X, MS020X, MS030X, MS040X, MS050X, MS070X, MS085X Variable Speed Total Access Modules MS010W, MS020W, MS030W, MS050W MS010V, MS020V,

More information

.2 Section Waste Management and Disposal.

.2 Section Waste Management and Disposal. Issued 2005/06/01 Section 15624 Packaged Rotary Screw Water Chillers Page 1 of 5 PART 1 General 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal..3

More information

MAC N-407 Air-Cooled Chiller

MAC N-407 Air-Cooled Chiller MAC036-01-N-407 Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial MicroClimates MAC036 NOMENCLATURE BREAKDOWN MAC036-01 - N - 407 Refrigerant Type Air-Cooled Chiller 036=

More information

Operation Maintenance

Operation Maintenance Installation Operation Maintenance RTHC-IOM-1C Library Service Literature Product Section Refrigeration Product Rotary Liquid Chillers - W/C Model RTHC Literature Type Installation, Operation and Maintenance

More information

PACKAGED AIR COOLED Product Data Catalog

PACKAGED AIR COOLED Product Data Catalog PACKAGED AIR COOLED Product Data Catalog MODELS ASP-10A ASP-15A ASP-20A ASP-00P ASP-00F ASP-00G A MEMBER OF MARDUK HOLDING COMPANY, LLC The Leader in Modular Chillers ETL and CSA Approved CHILLER MODULES

More information

SECTION CENTRIFUGAL WATER CHILLERS Vibration Isolation Pumping Equipment (HVAC) Induced Draft Cooling Tower

SECTION CENTRIFUGAL WATER CHILLERS Vibration Isolation Pumping Equipment (HVAC) Induced Draft Cooling Tower SECTION 15682 CENTRIFUGAL WATER CHILLERS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15240 - Vibration Isolation. 2. 15540 - Pumping Equipment (HVAC) 3. 15711 - Induced Draft Cooling Tower B. Removal

More information

SECTION ROTARY SCREW WATER CHILLERS. B. Removal of Existing Refrigerant in Existing Chiller:

SECTION ROTARY SCREW WATER CHILLERS. B. Removal of Existing Refrigerant in Existing Chiller: SECTION 15684 ROTARY SCREW WATER CHILLERS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15240 - Vibration Isolation. 2. 15540 - Pumping Equipment (HVAC). 3. 15711 - Induced Draft Cooling Tower. B.

More information

AquaStream 3G Air-Cooled Liquid Chillers

AquaStream 3G Air-Cooled Liquid Chillers Product Catalog AquaStream 3G Air-Cooled Liquid Chillers Model CGAM CG-PRC019-E4 Introduction Design and manufacturing excellence makes Trane a leader in the air-cooled chiller marketplace. This tradition

More information

Product Catalogue CG-PRC002E-EN. CGAD Liquid Chillers Air-Cooled Scroll Compressor 20 to 150 Tons. July Models: 50 / 60 Hz

Product Catalogue CG-PRC002E-EN. CGAD Liquid Chillers Air-Cooled Scroll Compressor 20 to 150 Tons. July Models: 50 / 60 Hz Product Catalogue CGAD Liquid Chillers Air-Cooled Scroll Compressor 20 to Tons Models: 50 / 60 Hz CGAD CGAD CGAD CGAD CGAD CGAD CGAD CGAD CGAD CGAD CGAD CGAD July 2012 CG-PRC002E-EN Introduction IMPORTANT:

More information

SECTION CENTRIFUGAL WATER CHILLERS

SECTION CENTRIFUGAL WATER CHILLERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Chiller package. B. Charge of refrigerant and oil. C. Controls and control connections. D. Chilled water connections. E. Condenser water connections. F. Variable

More information

Installation, Operation, and Maintenance

Installation, Operation, and Maintenance Installation, Operation, and Maintenance Series R Rotary Liquid Chillers Water-Cooled Model RTWD 60 to 250 Tons Compressor-Chillers Model RTUD 80 to 250 Tons RTWD chillers are part of the Ingersoll Rand

More information

APPLICATION MANUAL FOR SCU SERIES COMPRESSOR UNITS AND SWU SERIES WATER COOLED CONDENSING UNITS

APPLICATION MANUAL FOR SCU SERIES COMPRESSOR UNITS AND SWU SERIES WATER COOLED CONDENSING UNITS APPLICATION MANUAL FOR SCU SERIES COMPRESSOR UNITS AND SWU SERIES WATER COOLED CONDENSING UNITS SCU-30 SWU-30 Napps Technology Corporation P.O. Box 3066 Longview, TX 75606-3066 Phone: (903) 758-2900 FAX:

More information

Wicomico County Purchasing 125 N. Division St. Room B-3 Salisbury, MD Ph Fax Addendum # 1

Wicomico County Purchasing 125 N. Division St. Room B-3 Salisbury, MD Ph Fax Addendum # 1 Addendum No. 1 Wicomico County Purchasing 125 N. Division St. Room B-3 Salisbury, MD 21801 Ph. 410-548-4805 Fax 410-334-3130 Addendum # 1 Date: 3/11/2016 Bid: Chiller Removal and Installation A Pre-Bid

More information

MAC-120HE-03 Air-Cooled Chiller

MAC-120HE-03 Air-Cooled Chiller MAC-120HE-03 Air-Cooled Chiller 10 Ton / 120,000 BTUH Air-Cooled Chiller 380/415/460-3-50/60 1 HVAC Guide Specifications Air-Cooled Liquid Chiller Nominal Size: 10 Tons Multiaqua Model Number: MAC-120HE-03

More information

SECTION PACKAGED COMPRESSOR AND CONDENSER UNITS

SECTION PACKAGED COMPRESSOR AND CONDENSER UNITS SECTION 236200 - PACKAGED COMPRESSOR AND CONDENSER UNITS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions apply

More information

Air-Cooled Global Chiller

Air-Cooled Global Chiller Product Manual PM 970 Group: Chiller Effective: June 1997 Supersedes: None Air-Cooled Global Chiller Type AGR 055AS through 100AS Reciprocating Compressor with R-22 60 hertz 1997 McQuay International Table

More information

As a standard, heat exchangers are provided with flange water connections (BS Standard Table E). All evaporator are supplied fully insulated.

As a standard, heat exchangers are provided with flange water connections (BS Standard Table E). All evaporator are supplied fully insulated. NOMENCLATURE INTRODUCTION The HTT HWDX water-cooled chillers range is the latest addition to HTT s growing family of commercial products, featuring the most current technologies advances. The HWDX main

More information

Liebert CSU3000 Chiller

Liebert CSU3000 Chiller CSI 15620 - Packaged Water Chillers Liebert CSU3000 Chiller Guide Specifications for 7.5-37 Ton CS/CD/CT Models 1.0 GENERAL 1.1 CS/CD MODELS The main-frame coolant supply unit shall be a Liebert Model,

More information

Installation, Operation, and Maintenance

Installation, Operation, and Maintenance Installation, Operation, and Maintenance Series R Rotary Liquid Chillers Water-Cooled and Compressor-Chillers RTWD 60 RTWD 90 RTWD 120 RTWD 150 RTWD 200 RTWD 70 RTWD 100 RTWD 130 RTWD 160 RTWD 220 RTWD

More information

Indoor liquid chiller with integrated hydraulic module

Indoor liquid chiller with integrated hydraulic module Indoor liquid chiller with integrated hydraulic module Water-cooled: CGWN 205 206 207 208 209 210 211 212 213 214 215 Condenserless: CCUN 205 206 207 208 209 210 211 212 213 214 215 2 Contents Introduction

More information

B. Unit construction shall comply with ASHRAE 15 Safety Code, NEC, and ASME applicable codes (U.S.A. codes).

B. Unit construction shall comply with ASHRAE 15 Safety Code, NEC, and ASME applicable codes (U.S.A. codes). Guide Specifications PART 1 GENERAL 1.01 SYSTEM DESCRIPTION Microprocessor controlled, air-cooled liquid chiller utilizing scroll compressors, low sound fans, hydronic pump system and optional fluid storage

More information

Multi-Institutional Academic Health Science & Research Center Evansville, IN

Multi-Institutional Academic Health Science & Research Center Evansville, IN SECTION 236426.11 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information

SECTION PACKAGE AIR COOLED WATER CHILLER PART 1 GENERAL 1.01 SECTION INCLUDES. A. Chiller package. B. Charge of refrigerant and oil.

SECTION PACKAGE AIR COOLED WATER CHILLER PART 1 GENERAL 1.01 SECTION INCLUDES. A. Chiller package. B. Charge of refrigerant and oil. 1 1 1 1 1 1 1 1 0 1 0 1 SECTION 1 PACKAGE AIR COOLED WATER CHILLER PART 1 GENERAL 1.01 SECTION INCLUDES A. Chiller package. B. Charge of refrigerant and oil. C. Controls and control connections. D. Chilled

More information

Trane Rotary Screw Air Cooled Chiller 100 Ton

Trane Rotary Screw Air Cooled Chiller 100 Ton Trane Rotary Screw Air Cooled Chiller 100 Ton Mfg: Trane Model: RTAA 1004XF01A1COKBDFN Stock No. DBPF255.5 Serial No. U96D33776 Trane Rotary Screw Air Cooled Chiller 100 Ton. Model RTAA 1004XF01A1COKBDFN

More information

Guide Specifications

Guide Specifications Guide Specifications Hot Water fired Adsorption Liquid Chillers Bry-Air Adsorption Chiller Overview The chiller shall be a Bry-Air ADC series. The chiller shall consist of a robust, compact, packaged chiller

More information

1025, BOUL. MARCEL-LAURIN INSTRUCTION MANUAL FOR WATER COOLED ENVIROCHILL CHILLER. Prepared par Claude Gadoury, P. Eng MTL TECHNOLOGIES INC.

1025, BOUL. MARCEL-LAURIN INSTRUCTION MANUAL FOR WATER COOLED ENVIROCHILL CHILLER. Prepared par Claude Gadoury, P. Eng MTL TECHNOLOGIES INC. WYETH-AYERST CANADA INC. 1025, BOUL. MARCEL-LAURIN S T - L A U R E N T, Q U É B E C INSTRUCTION MANUAL FOR WATER COOLED ENVIROCHILL CHILLER MODEL P448800LT--55WC--22C66S Prepared par Claude Gadoury, P.

More information

Installation Operation Maintenance

Installation Operation Maintenance Installation Operation Maintenance RTAF SE/HE/XE/HSS/HSE Air-cooled Helical-rotary chillers 300-1600 kw Sintesis chillers are part of the Ingersoll Rand EcoWise portfolio of products that are designed

More information

1.2 REFERENCES - comply with the following codes and standards:

1.2 REFERENCES - comply with the following codes and standards: 15684 ROTARY SCREW AND SCROLL CHILLERS ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 236423 SPECIFIER;

More information

MODELS LIST. Nominal Capacity RT

MODELS LIST. Nominal Capacity RT 1. MODELS LIST. NOMENCLATURE 3. FEATURES 4. PRODUCT DATA 5. PERFORMANCE CORRECTION 6. ANTIFREEZE 7. INSTALLATION 8. ELECTRICAL DATA 9. SCHEMATIC WIRING DIAGRAM 10.MICROPROCESSOR CONTROLLER 11.APPLICATION

More information

SECTION AIR COOLED WATER CHILLER

SECTION AIR COOLED WATER CHILLER Note: Shading in the body of the specification is to identify work that will be given to the installing contractor in the subsequent Request for Chiller Installation documents to be issued by the Owner.

More information

SECTION AIR COOLED WATER CHILLERS

SECTION AIR COOLED WATER CHILLERS PART 1 GENERAL 1.1 SECTION INCLUDES A. Chiller package B. Charge of refrigerant and oil C. Controls and control connections D. Chilled water connections E. Starters F. Electrical power connections 1.2

More information

SCROLL LIQUID CHILLERS

SCROLL LIQUID CHILLERS SCROLL LIQUID CHILLERS Application Manual Model NWC and NCC 15 TO 70 Tons (60 Hz) Water Cooled and Compressor 410A Chillers INTRODUCTION The NAPPS 410A Scroll Liquid Chiller Compressor Design Napps NWC

More information

Product Catalog. Air-Cooled Series R Chillers Model RTAC Nominal Tons (60 Hz) RLC-PRC006-EN. May 2012

Product Catalog. Air-Cooled Series R Chillers Model RTAC Nominal Tons (60 Hz) RLC-PRC006-EN. May 2012 Product Catalog Air-Cooled Series R Chillers Model RTAC 140-500 Nominal Tons (60 Hz) May 2012 RLC-PRC006-EN Introduction Trademarks Like its chillers, Trane wants its relationships with customers to last.

More information

Installation Operation Maintenance

Installation Operation Maintenance Installation Operation Maintenance Series R Air-Cooled Helical Rotary Liquid Chiller RTAD 085-180 (50Hz) Standard, Free Cooling and Heat Recovery models RTAD-SVX01F-E4 General information Foreword These

More information

RECORD SUBMITTAL COVER SHEET

RECORD SUBMITTAL COVER SHEET RECORD SUBMITTAL COVER SHEET PROJECT TITLE: AXCELLERATE PHARMA EQUIPMENT DESCRIPTION: CARRIER AQUASNAP AIR-COOLED CHILLER CH-1 OWNER: AXCELLERATE PHARMA MECHANICAL ENGINEER: ARDEN DATE: JUNE 27, 2014 SUBMITTED

More information

VariCool VAV Engineering Guide

VariCool VAV Engineering Guide Engineering Guide Effective September 2017 Water-Cooled and Chilled Water, Variable Air Volume Contents Product Features... 3 UNIT FEATURES... 3 Product Features... 4 Marvel Plus Microprocessor Control

More information

Water-to-Water Heat Pump Product Data Catalog R-134a Modules MR010AN, MR015AN, MR020AN, MR030AN, MR040AN, MR050AN, MR070AN, MR085AN

Water-to-Water Heat Pump Product Data Catalog R-134a Modules MR010AN, MR015AN, MR020AN, MR030AN, MR040AN, MR050AN, MR070AN, MR085AN Water-to-Water Heat Pump Product Data Catalog R-134a Modules MR010AN, MR015AN, MR020AN, MR030AN, MR040AN, MR050AN, MR070AN, MR085AN R-410A Modules MR010XN, MR015XN, MR020XN, MR030XN, MR040XN, MR050XN,

More information

30GH Air-Cooled Liquid Chillers 30GH Nominal cooling capacity kw

30GH Air-Cooled Liquid Chillers 30GH Nominal cooling capacity kw Air-Cooled Liquid Chillers Nominal cooling capacity 21-94 kw Carrier is participating in the Eurovent Certification Programme. Products are as listed in the Eurovent Directory of Certified Products. The

More information

SYSTEM DESIGN REQUIREMENTS

SYSTEM DESIGN REQUIREMENTS P a g e 1 SYSTEM DESIGN REQUIREMENTS WFC-S SERIES WATER-FIRED SINGLE-EFFECT ABSORPTION CHILLERS / CHILLER-HEATERS Yazaki WFC-S Series water-fired chillers and chiller-heaters are available with nominal

More information

Dunham Bush Air Cooled Screw Chiller AFVX B 6SR Series

Dunham Bush Air Cooled Screw Chiller AFVX B 6SR Series Dunham Bush Air Cooled Screw Chiller AFVX B 6SR Series Type of Compressors Compressor Rotary Scroll Reciprocating Screw Centrifugal Air Cooled Chiller 77 ~ 329TR (270 ~ 1156 kw) ACDX Series 100 ~ 520TR

More information

Leadership, Innovation, Advanced Technology Synergise Here!

Leadership, Innovation, Advanced Technology Synergise Here! Cooling Synergies Leadership, Innovation, Advanced Technology Synergise Here! 125 years of Engineering Innovation Kirloskar Chillers is proud to be a part of 125 years old Kirloskar Group. The diversified

More information

Air-Cooled Series R Helical-Rotary Liquid Chiller

Air-Cooled Series R Helical-Rotary Liquid Chiller Air-Cooled Series R Helical-Rotary Liquid Chiller Model RTAC 120 to 400 (400 to 1500 kw 50 Hz) Built for the Industrial and Commercial Markets Model RTAC size 155 RLC-PRC005G-GB Introduction The Trane

More information

Water-cooled chillers with High Speed Centrifugal Compressors

Water-cooled chillers with High Speed Centrifugal Compressors Water-cooled chillers with High Speed Centrifugal Compressors Refrigerant R134a 190-760 (395 to 2660 kw) Refrigerant R1234ze 135 G - 505 G (310 to 1820 kw) Table of Contents Introduction...3 Features and

More information

30RB/RQ 039S-160S Refrigerant HFC-410A Nominal cooling capacity kw Nominal heating capacity kw

30RB/RQ 039S-160S Refrigerant HFC-410A Nominal cooling capacity kw Nominal heating capacity kw AIR-COOLED LIQUID CHILLER REVERSIBLE AIR-TO-WATER HEAT PUMP PRO-DIALOG PLUS 30RB/RQ 039S-60S Refrigerant HFC-40A Nominal cooling capacity 40-58 kw Nominal heating capacity 4-59 kw The new generation of

More information

Indoor liquid chiller with integrated hydraulic module

Indoor liquid chiller with integrated hydraulic module Indoor liquid chiller with integrated hydraulic module Water-cooled: CGWN 205 206 207 208 209 210 211 212 213 214 215 Condenserless: CCUN 205 206 207 208 209 210 211 212 213 214 215 CG-PRC014G-GB Table

More information

Air-Cooled Series R Helical-Rotary Liquid Chiller

Air-Cooled Series R Helical-Rotary Liquid Chiller Air-Cooled Series R Helical-Rotary Liquid Chiller Model RTAC 120 to 200 (400 to 760kw - 50 Hz) Built for the Industrial and Commercial Markets Introduction The new Trane Model RTAC Air-Cooled Helical-Rotary

More information

Product Catalog. Air-Cooled Scroll Chillers Model CGAM - Made in USA NominalTons (50 Hz and 60 Hz) CG-PRC017H-EN.

Product Catalog. Air-Cooled Scroll Chillers Model CGAM - Made in USA NominalTons (50 Hz and 60 Hz) CG-PRC017H-EN. Product Catalog Air-Cooled Scroll Chillers Model CGAM - Made in USA 20-130 NominalTons (50 Hz and 60 Hz) February 2015 CG-PRC017H-EN Introduction Copyright Design and manufacturing excellence makestrane

More information

CT1507B035 TENDER FOR THE REPLACEMENT OF CHILLER SYSTEMS AT SATS AFT 6, 20 AIRLINE ROAD, SINGAPORE PART VI TECHNICAL SPECIFICATIONS SECTION 1

CT1507B035 TENDER FOR THE REPLACEMENT OF CHILLER SYSTEMS AT SATS AFT 6, 20 AIRLINE ROAD, SINGAPORE PART VI TECHNICAL SPECIFICATIONS SECTION 1 PART VI TECHNICAL SPECIFICATIONS SECTION 1 CHILLER TS-CH-1 TECHNICAL SPECIFICATION OF 1 GENERAL CHILLER 1.1 SYSTEM DESCRIPTION Microprocessor-controlled liquid chiller with single/multi compressors (VFD),

More information

Product Catalog. Air-Cooled Scroll Chillers Model CGAM Made in USA 20 to 130 NominalTons (60 Hz and 50 Hz) CG-PRC017N-EN.

Product Catalog. Air-Cooled Scroll Chillers Model CGAM Made in USA 20 to 130 NominalTons (60 Hz and 50 Hz) CG-PRC017N-EN. Product Catalog Air-Cooled Scroll Chillers Model CGAM Made in USA 20 to 130 NominalTons (60 Hz and 50 Hz) July 2017 CG-PRC017N-EN Introduction Copyright Design and manufacturing excellence makestrane a

More information

LC Series Chillers. Engineering Catalog. Air-Cooled Condenser

LC Series Chillers. Engineering Catalog. Air-Cooled Condenser LC Series Chillers Engineering Catalog Air-Cooled Condenser Table of Contents Features and Benefits... 5 Application Information... 7 Unit Selection... 11 Evaporator Pressure Drops... 14 LC Base Model

More information

CVGF. Water Cooled Centrifugal Chillers

CVGF. Water Cooled Centrifugal Chillers CVGF Water Cooled Centrifugal Chillers January 2010 CVGF Key Features 2 stage centrifugal compressor Semi-hermetic compressor R134a refrigerant Falling film evaporator Economizer cycle NEW Tracer Adaptiview

More information

YCAL-SB Millennium AIR COOLED LIQUID CHILLER R407C REFRIGERANT. COOLING CAPACITIES 141 kw to 360 kw

YCAL-SB Millennium AIR COOLED LIQUID CHILLER R407C REFRIGERANT. COOLING CAPACITIES 141 kw to 360 kw YCAL-SB Millennium AIR COOLED LIQUID CHILLER R407C REFRIGERANT COOLING CAPACITIES 141 kw to 360 kw YORK YCAL-SB Millennium air cooled scroll liquid chillers provide chilled liquid for all air conditioning

More information

Water-Cooled Screw Compressor Chillers

Water-Cooled Screw Compressor Chillers Catalog Cat WGS Water-Cooled Screw Compressor Chillers WGS 130AW To WGS 190AW, Packaged Water-Cooled Chiller WGS 130AA To WGS 190AA, Chiller with Remote Condenser 120 to 200 Tons, 420 to 700 kw R-134A,

More information

TITAN SERIES Complete Central Chiller & Pump Tank Package 20 to 70 Tons 20 F to 70 F

TITAN SERIES Complete Central Chiller & Pump Tank Package 20 to 70 Tons 20 F to 70 F Temperature Control Units Water & Oil - F Portable Chillers Air & Water-Cooled - 7 F Central Chillers Air & Water-Cooled Packages & Modules - 7 F Pump Tank Stations Chilled or Tower Water - gallons Cooling

More information

Installation Operation Maintenance

Installation Operation Maintenance Installation Operation Maintenance RTAF SE/HE/XE/HSS/HSE R134a, R513A, R1234ze Air-cooled Helical-rotary chillers 300-1900 kw Sintesis chillers are part of the Ingersoll Rand EcoWise portfolio of products

More information

Product Data. Features/Benefits ComfortLink control

Product Data. Features/Benefits ComfortLink control Product Data 30GTN,GTR Air-Cooled Reciprocating Liquid Chillers with ComfortLink Controls 50/60 Hz Nominal Capacities: 60 to 410 Tons 205 to 1445 kw Features/Benefits ComfortLink control Your link to a

More information

TECHNICAL GUIDE DESCRIPTION SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS MODELS: HF-07 FEATURES B-0703

TECHNICAL GUIDE DESCRIPTION SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS MODELS: HF-07 FEATURES B-0703 TECHNICAL GUIDE SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS MODELS: HF-07 DESCRIPTION These Sunline 2000 units are completely assembled, piped and wired at the factory to provide one-piece shipment and rigging.

More information

Modified by MSU Physical Plant / Engineering and Architectural Services

Modified by MSU Physical Plant / Engineering and Architectural Services Page 236426-1 Copyright 2009 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant

More information

MAC-036HE-02-L High Efficiency Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial Micro Climates Rev 1.

MAC-036HE-02-L High Efficiency Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial Micro Climates Rev 1. MAC-036HE-02-L High Efficiency Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial Micro Climates Rev 1.1 HVAC Guide Specifications Air-Cooled Liquid Chiller with Low Ambient

More information

MAC-048HE-01-L High Efficiency Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial Micro Climates Rev 1.

MAC-048HE-01-L High Efficiency Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial Micro Climates Rev 1. MAC-048HE-01-L High Efficiency Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial Micro Climates Rev 1.1 HVAC Guide Specifications Air-Cooled Liquid Chiller with Low Ambient

More information

Circulating Water Temperature Controller

Circulating Water Temperature Controller Circulating Water Temperature Controller Precise, Powerful and Compact Control The answer to your circulating water temperature control challenges. Chromalox, a world leader in control technology For over

More information

MAC-060HE-01-L High Efficiency Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial Micro Climates Rev 1.

MAC-060HE-01-L High Efficiency Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial Micro Climates Rev 1. MAC-060HE-01-L High Efficiency Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial Micro Climates Rev 1.2 HVAC Guide Specifications Air-Cooled Liquid Chiller with Low Ambient

More information

MLC Air Cooled Chillers MLC-FC Free Cooling Chillers MLC-AD Adiabatic Chillers

MLC Air Cooled Chillers MLC-FC Free Cooling Chillers MLC-AD Adiabatic Chillers MLC Air Cooled Chillers MLC-FC Free Cooling Chillers MLC-AD Adiabatic Chillers 60-500 Tons n Mission Critical Cooling n Central Plant Process Cooling n Specialized HVAC Cooling Systems COOLING SOLUTIONS

More information

LL Series Chillers and Outdoor Mechanical Rooms. Engineering Catalog

LL Series Chillers and Outdoor Mechanical Rooms. Engineering Catalog LL Series Chillers and Outdoor Mechanical Rooms Engineering Catalog Evaporative-Cooled Condenser Air-Cooled Condenser Table of Contents Features and Benefits... 7 Application Information... 11 Unit Selection...

More information

30HXC - 50 HZ. Water-Cooled Screw Compressor Liquid Chillers. Nominal cooling capacity kw

30HXC - 50 HZ. Water-Cooled Screw Compressor Liquid Chillers. Nominal cooling capacity kw Water-Cooled Screw Compressor Liquid Chillers Carrier is participating in the Eurovent Certification Programme. Products are as listed in the Eurovent Directory of Certified Products. 0HC - 50 HZ Nominal

More information

ATTACHMENT B SECTION SPECIAL CONDITIONS

ATTACHMENT B SECTION SPECIAL CONDITIONS ATTACHMENT B SECTION 01 00 00 SPECIAL CONDITIONS PART 1 - GENERAL A. Day to Day Operation 1. Contractor is advised that project is part of an existing operational inpatient acute care hospital. This facility

More information

SLS 1202 to With or without total heat recovery. u Air Cooled Screw Chillers. 262 to 916 kw. Engineering Data Manual

SLS 1202 to With or without total heat recovery. u Air Cooled Screw Chillers. 262 to 916 kw. Engineering Data Manual u Air Cooled Screw Chillers SLS 1202 to 4004 With or without total heat recovery 262 to 916 kw Engineering Data Manual EDM SLS407-A.4GB Date : December 2008 Supersedes : TM SLS407-A.3GB/11.06 Specifications

More information

Technical Development Program

Technical Development Program Technical Development Program COMMERCIAL HVAC CHILLER EQUIPMENT Water-Cooled Chillers PRESENTED BY: Omar Rojas Sales Engineer Menu Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7

More information

Air-Cooled Condensing Units with Compact Screw Compressors

Air-Cooled Condensing Units with Compact Screw Compressors LK-SCUTB March 2015 Air-Cooled Condensing Units with Compact Screw s Technical Bulletin Models SSV DSV Table of Contents Nomenclature Chart... 2 Introduction... 3 Bitzer TM s... 4 Magnum TM Microprocessor...

More information

Product catalogue RLC-PRC006D-EN

Product catalogue RLC-PRC006D-EN Product catalogue Model RTAC Air-Cooled Series R Rotary Liquid Chiller RTAC Plus 140-350 Ton (60 Hz) RTAC Plus 140-300 Ton (50 Hz) Built For the Industrial and Commercial Markets January 2016 Introduction

More information

Installation Operation Maintenance

Installation Operation Maintenance Installation Operation Maintenance Series R Helical Rotary Water-Cooled Liquid and Compressor Chillers Models RTWD and RTUD RLC-SVX14C-E4 General information Foreword These instructions are given as a

More information

Precise Temperature Control; Compact Footprint

Precise Temperature Control; Compact Footprint Precise Temperature Control; Compact Footprint The Conair EP1 Series Portable Chillers are designed for 1 to 3 ton applications. Available as air-cooled or water-cooled, with pump sizes from 1/4 to 3 Hp

More information

For Modules: ASM002X, ASM003X, ASM005X, ASM008X, ASM010X, ASM015X, ASM020X, ASM030X. Air Cooled Medical Chiller Product Data Catalog

For Modules: ASM002X, ASM003X, ASM005X, ASM008X, ASM010X, ASM015X, ASM020X, ASM030X. Air Cooled Medical Chiller Product Data Catalog For Modules: ASM002X, ASM003X, ASM005X, ASM008X, ASM010X, ASM015X, ASM020X, ASM030X Air Cooled Medical Chiller Product Data Catalog Product Introduction Multistack products are ideal for many mission

More information