TECHNICAL MANUAL. GMH95 40" 95% Gas Furnace

Size: px
Start display at page:

Download "TECHNICAL MANUAL. GMH95 40" 95% Gas Furnace"

Transcription

1 TEHNIAL MANUAL AL 40" 95% Gas Furnace Refer to Service Manual RS for installation, operation, and troubleshooting information. All safety information must be followed as provided in the Service Manual. Refer to the appropriate Parts atalog for part number information. Model numbers listed on page 3. US This manual is to be used by qualified, professionally trained HVA technicians only. Goodman does not assume any responsibility for property damage or personal injury due to improper service procedures or services performed by an unqualified person. RT6608 Rev. 5 April 00 opyright 007, Goodman Manufacturing ompany, L.P.

2 PRODUT IDENTIFIATION The model and manufacturing number are used for positive identification of component parts used in manufacturing. Please use these numbers when requesting service or parts information. G M H A X A A Brand: G: Goodman Minior Revision A: Revision Air Flow Direction M:Upflow/Horizontal D: Dedicated Downflow : Downflow/Horizontal H: Hi Air Flow Description H: Dual$aver, Multi Speed V: Two Stage/Variable Speed NOx N: Natural Gas X: Low NOx Major Revision A: Initial Release AFUE 9: 90% 95: 95% KBTUH 045: 45, : 70, : 90,000 5: 5,000 40: 40,000 Maximum 0.5" ESP 3: 00 4: 600 5: 000 abinet Width A: 4" B: 7 /" : " D: 4 /" WARNING HIGH VOLTAGE! Disconnect ALL power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury or death. WARNING Goodman will not be responsible for any injury or property damage arising from improper service or service procedures. If you install or perform service on this unit, you assume responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install or service heating and air conditioning equipment. WARNING Installation and repair of this unit should be performed ONLY by individuals meeting the requirements of an "entry level technician", at a minimum, as specified by the Air-onditioning, Heating, and Refrigeration Institute (AHRI). Attempting to install or repair this unit without such background may result in product damage, personal injury or death.

3 PRODUT IDENTIFIATION The model and manufacturing number are used for positive identification of component parts used in manufacturing. Please use these numbers when requesting service or parts information. 0453BXA* 0703BXA* 0704XA* 0904XA* 0905DXA* 55DXA* WARNING The United States Environmental Protection Agency ( EPA ) has issued various regulations regarding the introduction and disposal of refrigerants introduced into this unit. Failure to follow these regulations may harm the environment and can lead to the imposition of substantial fines. These regulations may vary by jurisdiction. Should questions arise, contact your local EPA office. WARNING Do not connect or use any device that is not design certified by Goodman for use with this unit. Serious property damage, personal injury, reduced unit performance and/or hazardous conditions may result from the use of such non-approved devices. WARNING To prevent the risk of property damage, personal injury, or death, do not store combustible materials or use gasoline or other flammable liquids or vapors in the vicinity of this appliance. 3

4 PRODUT DESIGN General Operation The furnaces are equipped with an electronic ignition device used to light the burners and an induced draft blower to exhaust combustion products. An interlock switch prevents furnace operation if the blower door is not in place. Keep the blower access door in place except for inspection and maintenance. This furnace is also equipped with a self-diagnosing electronic control module. In the event a furnace component is not operating properly, the control module LED will flash on and off in a factory-programmed sequence, depending on the problem encountered. This light can be viewed through the observation window in the blower access door. Refer to the Troubleshooting hart for further explanation of the LED codes and Abnormal Operation - Integrated Ignition ontrol section in the Service Instructions for an explanation of the possible problem. The rated heating capacity of the furnace should be greater than or equal to the total heat loss of the area to be heated. The total heat loss should be calculated by an approved method or in accordance with ASHRAE Guide or Manual J-Load alculations published by the Air onditioning ontractors of America. *Obtain from: American National Standards Institute 430 Broadway New York, NY 008 Location onsiderations The furnace should be as centralized as is practical with respect to the air distribution system. Do not install the furnace directly on carpeting, tile, or combustible material other than wood flooring. When suspending the furnace from rafters or joists, use 3/8" threaded rod and x x 3/8 angle as shown in the Installation and Service Instructions. The length of the rod will depend on the application and clearance necessary. When installed in a residential garage, the furnace must be positioned so the burners and ignition source are located not less than 8 inches (457 mm) above the floor and protected from physical damage by vehicles. Notes:. Installer must supply one or two PV pipes: one for combustion air (optional) and one for the flue outlet (required). Vent pipe must be either or 3 in diameter, depending upon furnace input, number of elbows, length of run and installation ( or pipes). The optional ombustion Air Pipe is dependent on installation/code requirements and must be or 3 diameter PV.. Line voltage wiring can enter through the right or left side of the furnace. Low voltage wiring can enter through the right or left side of furnace. 3. onversion kits for high altitude natural or propane gas operation are available. See High Altitude Derate chart for details. 4. Installer must supply the following gas line fittings, depending on which entrance is used: Left -- Two 90º Elbows, one close nipple, straight pipe. Right -- Straight pipe to reach gas valve. Accessibility learances (Minimum) MINIMUM LEARANES TO OMBUSTIE MATERIALS (INHES) POSITION* FRONT SIDES REAR TOP FLUE FLO Upflow Horizontal *= All positioning is determined as installed unit is viewed from the front. = If placed on combustible floor, floor MUST be wood only. N= For instalaltion on non-combustible floors only. A non-combustible subbase must be used for installations on combustible flooring. 4" at front is required for servicing or cleaning. Note: In all cases accessibility clearance shall take precedence over clearances from the enclosure where accessibility clearances are greater. All dimensions are given in inches. High Altitude Derate When this furnace is installed at high altitude, the appropriate High Altitude orifice kit must be installed. This is required due to the natural reduction in the density of both the gas fuel and combustion air as altitude increases. The kit will provide the proper design certified input rate within the specified altitude range. MODEL NUMBER *****XA* PROPANE AND HIGH ALTITUDE KITS 0 to 7,000 ft. 7,00 to 9,000 ft. 9,00 to,000 ft. LPM-05 LPM-06 Propane onversion Kit (#55 Orifices) HANG High Altitude Natural Gas Kit (#44 Orifices ) HANG High Altitude Natural Gas Kit (#45 Orifices) LPM-05* supports W hite-rodgers -stage valves only LPM-06* supports Honeywell and W hite-rodgers -stage valves 7,00 to,000 ft. HALP 0 H igh Altitude LP Gas Kit (#56 Orifices) High altitude kits are purchased according to the installation altitude and usage of either natural or propane gas. Refer to the chart above for a tabular listing of appropriate altitude ranges and corresponding manufacturer s high altitude Natural Gas and Propane Gas kits. For a tabular listing of appropriate altitude ranges and corresponding manufacturer's High Altitude Pressure Switch kits, refer to either the Pressure Switch Trip Points & Usage hart in this manual or the Accessory harts in Service Instructions. 4

5 OMPONENT IDENTIFIATION Upflow/Horizontal Gas Valve Gas Line Entrance (Alternate) 3 Pressure Switch 4 Gas Manifold 5 ombustion Air Intake onnection / oupling 6 Hot Surface Igniter 7 Rollout Limit 8 Burners 9 Flame Sensor 0 Flue Pipe onnection / oupling Flue Pipe (Internal) Primary Limit 3 Gas Line Entrance 4 Flue Pipe onnection (Alternate) 5 Rubber Elbow 6 Induced Draft Blower 7 Electrical onnection Inlets (Alternate) 8 oil Front over Pressure Tap 9 oil Front over Drain Port 0 Drain Line Penetrations Drain Trap Blower Door Interlock Switch 3 apacitor 4 Integrated ontrol Module (with fuse and diagnostic LED) 5 4-Volt Thermostat onnections 6 Transformer (40 VA) 7 irculator Blower 8 Auxiliary Limit 9 Junction Box 30 Electrical onnection Inlets 3 oil Front over 5

6 OMPONENT IDENTIFIATION *****XA* AIR DISHARGE AIR DISHARGE AIR INTAKE PIPE " PV / RIGHT SIDE DRAIN LINE HOLES 5/8 UNFOLDED FLANGES UNFOLDED FLANGES FOLDED FLANGES FOLDED FLANGES RIGHT SIDE VIEW abinet Size A B D E 0453BXA* 0703BXA* 7-/ 6-5/6 -/8 3-5/8 0704XA* 0904XA* 9-/ 5-5/6 6 7-/ 0905DXA* 55DXA* 4-/ 3 0-7/6 9-3/8 0-7/8 All dimensions are in inches. Note: Airflow area will be reduced by approximately 8% if duct flanges are not unfolded. This could cause performance issues and noise issues. 6

7 PRODUT DESIGN SWITH TRIP POINTS AND USAGE HART MODEL NEGATIVE WITH FLUE NOT FIRING TYPIAL SEA LEVEL DATA () NEGATIVE WITH FLUE FIRING TYPIAL SEA LEVE DATA () NEGATIVE OIL OVER WITH FLUE NOT FIRING TYPIAL SEA LEVEL DATA () NEGATIVE OIL OVER WITH FLUE FIRING TYPIAL SEA LEVE DATA () TRIP POINT OIL OVER SWITH OIL OVER SWITH PART # SWITH TRIP POINTS AND USAGE 0 to 7,000 ft. TRIP POINT SWITH SWITH PART # TRIP POINT OIL OVER SWITH 7,00 to,000 ft. TRIP POINT SWITH HIGH ALTITUDE KIT 0453BXA* F00000P TBD TBD TBD 0703BXA* F0000P TBD TBD TBD 0704XA* F00000P TBD TBD TBD 0904XA* F0000P TBD TBD TBD 0905DXA* F00000P TBD TBD TBD 55DXA* F00000P TBD TBD TBD () Data given is least negative pressure required for pressure switch to close. () Data given is the least negative pressure required for pressure switch to remain closed. T.O.D. PRIMARY LIMIT Part Number Open Setting ( F) BXA* 0703BXA* 0704XA* 0904XA* 0905DXA* 55DXA* 7

8 PRODUT DESIGN ROLLOUT LIMIT SWITHES Part Number 0354 or Open Setting ( F) BXA* 0703BXA* 0704XA* 0904XA* 0905DXA* 55DXA* AUXILIARY LIMIT SWITHES Part Number Open Setting ( F) BXA* 0703BXA* 0704XA* 0904XA* 0905DXA* 55DXA* 8

9 PRODUT DESIGN oil Matches: A large array of Amana brand coils are available for use with the furnaces, in either upflow or horizontal applications. These coils are available in both cased and uncased models (with the option of a field installed TXV expansion device). These 95%+ furnaces match up with the existing Amana brand coils as shown in the chart below. oil Matches (for Goodman units using R and R-40A): A P F 84 A 6 A PRODUT TYPE: : Indoor oil APPLIATION A: Upflow/Downflow oil H: Horizontal A oil S: Horizontal Slab oil ABINET FINISH: U: Unpainted P: Painted N: Unpainted ase EXPANSION DEVIE: F: Flowrater REFRIGERANT HARGE: 6: R-40A or R- : R- 4: R-40a REVISION A: Revision NOMINAL WIDTH F GAS FURNAE A: Fits 4" Furnace abinet B: Fits 7 /" Furnace abinet : Fits " Furnace abinet D: Fits 4 /" Furnace abinet N: Does Not Apply (Horizontal Slab oils) NOMINAL APAITY 3 SEER 84: / to Tons 3030: / Tons 3636: 3 Tons 364: 3 to 3 / Tons 3743: 3 to 3 / Tons 4860: 4 & 5 Tons 496: 4 & 5 Tons All APF coils in B,, & D widths have insulated blank off plates for use with one size smaller furnaces. All APF coils have a AUF equivalent. All HPF coils in B, & D heights have an insulated Z bracket for use with one size smaller furnace. All proper coil combinations are subject to being ARI rated with a matched outdoor unit. 9

10 PRODUT DESIGN Thermostats: NOTE: omplete lineup of thermostats can be found in the Thermostat Specification Sheets. Filters: Filters are required with this furnace and must be provided by the installer. The filters used must comply with UL900 or AN/ULS standards. Installing this furnace without filters will void the unit warranty. Upflow Filters This furnace has provisions for the installation of return air filters at the side and/or bottom return. The furnace will accommodate the following filter sizes depending on cabinet size: abinet Width (in.) SIDE RETURN Nominal Filter Size (in.) Approx. Flow Area (in ) abinet Width (in.) BOTTOM RETURN () Nominal Filter Size (in.) Approx. Flow Area (in ) All 6 x 5 x / 4 x 5 x x 5 x / 0 x 5 x 500 () Flanges on bottom return must be unfolded Refer to Minimum Filter Area tables to determine filter area requirement. NOTE: Filters can also be installed elsewhere in the duct system such as a central return. OOLING AIRFLOW REQUIREMENT (FM) OOLING AIRFLOW REQUIREMENT (FM) BXA* 388* 388* BXA* 94* 94* Input Airflow 0703BXA* * 647* 647* XA* * 583* XA* * 863* 863* 863* DXA* * 777* 777* 960 Input Airflow 0703BXA* * 34* 34* XA* * 9* XA* * 43* 43* 43* DXA* * 388* 388* DXA* * 97* 97* 97* 55DXA* * 486* 486* 486* *Minimum filter area dictated by heating airflow requirement. Disposable Minimum Filter Area (in ) [Based on a 300 ft/min filter face velocity] *Minimum filter area dictated by heating airflow requirement. Permanent Minimum Filter Area (in ) [Based on 600 ft/min filter face velocity] 0

11 FURNAE SPEIFIATIONS MODEL 0453BXA* 0703BXA* 0704XA* 0904XA* 0905DXA* 55DXA* Btuh Input (US) 46,000 69,000 69,000 9,000 9,000 5,000 Output (US) 44,400 66,400 66,900 89,000 88,400 0,500 Input (AN) 46,000 69,000 69,000 9,000 9,000 5,000 Output (AN) 44,400 66,400 66,900 89,000 89,400 0,500 A.F.U.E. 95.0% 95.0% 95.0% 95.0% 95.0% 95.0% Rated External Static (" w.c.) Temperature Rise ( F) ID Blower Pressure Switch Trip Point (" w.c.) Front over Pressure Switch Trip Point (" w.c.) Blower Wheel (D" x W") 0 x 8 0 x 8 0 x 0 0 x 0 x 0 x 0 Blower Horsepower /3 /3 / / 3/4 3/4 Blower Speeds Max 0.5 E.S.P Power Supply Minimum ircuit Ampacity (MA) () Maximum Overcurrent Device () Transformer (VA) Primary Limit Setting ( F) Auxiliary Limit Setting ( F) Rollout Limit Setting ( F) Fan Delay On Heating 30 secs. 30 secs. 30 secs. 30 secs. 30 secs. 30 secs. Off Heating (3) 50 secs. 50 secs. 50 secs. 50 secs. 50 secs. 50 secs. Fan Delay On ooling 6 sec. 6 sec. 6 sec. 6 sec. 6 sec. 6 sec. Off ooling 45 secs. 45 secs. 45 secs. 45 secs. 45 secs. 45 secs. Gas Supply Pressure (Natural/Propane) ("w.c.) 7 / 7 / 7 / 7 / 7 / 7 / Manifold Pressure (Natural/Propane) ("w.c.) 3.5 / / / / / / 0 Orifice Size (Natural/Propane) 43 / / / / / / 55 Number of Burners Vent onnector Diameter (inches) (4) ombustion Air onnector Diameter (inches) (5) Shipping Weight (lbs.) () Wire size should be determined in accordance with National Electrical odes. Extensive wire runs will require larger wire sizes. () Maximum Overcurrent Protection Device: May use Time Delay Fuse or HAR type ircuit Breaker of the same size as noted. (3) Off Heating - this fan delay timing is adjustable (00 and 50 seconds). Furnaces are shipped with 50 second off delay. (4) See Installation Instructions for appropriate vent diameter, length and number of elbows. (5) See Installation Instructions for appropriate combustion air pipe diameter, length and number of elbows. NOTE: This data is provided as a guide, it is important to electrically connect the unit and properly size fuses/circuit breakers and wires in accordance with all national and/or local electrical codes. Use copper wire only.. These furnaces are manufactured for natural gas operation. Optional kits are available for conversion to propane operation.. For elevations above 000 feet the rating should be reduced by 4% for each 000 feet above sea level. The furnace must not be derated, orifice changes should only be made if necessary for altitude. 3. The total heat loss from the structure as expressed in TOTAL BTU/HR must be calculated by the manufacturers method or in accordance with the "A.S.H.R.A.E. GUIDE" or "MANUAL J-LOAD ALULATIONS" published by the AIR ONDITIONING ONTRATS OF AMERIA. The total heat loss calculated should be equal to or less than the heating capacity. Output based on D.O.E. test procedures. 4. Minimum ircuit Ampacity calculated as: (.5 x irculator Blower Amps) + I.D. Blower Amps. Unit specifications are subject to change without notice. ALWAYS refer to the units serial plate for the most up-to-date general and electrical information.

12 OWER PERFMANE SPEIFIATIONS Model Heating Speed ( As Shipped ) Motor Speed OWER PERFMANE (FM & Temperature Rise vs. External Static Pressure) Tons A at 0.5" ESP EXTERNAL STATI (Inches Water olumn) FM RISE FM RISE FM RISE FM RISE FM RISE FM FM FM HIGH BXA* MED (MED-HI) MED-LO LOW HIGH BXA* MED (MED-HI) MED-LO LOW HIGH XA* MED (MED-HI) MED-LO LOW HIGH XA* MED (MED-HI) MED-LO LOW HIGH DXA* MED (MED-HI) MED-LO LOW HIGH DXA* MED (MED-HI) MED-LO LOW FM in chart is without filters(s). Filters do not ship with this furnace, but must be provided by the installer. If the furnace requires two return filters, this chart assumes both filters are installed.. All furnaces ship as high speed cooling and medium-speed heating. Installer must adjust blower cooling & heating speed as needed. 3. For most jobs, about 400 FM per ton when cooling is desirable. 4. INSTALLATION IS TO BE ADJUSTED TO OBTAIN TEMPERATURE RISE WITHIN THE RANGE SPEIFIED ON THE RATING PLATE. 5. The chart is for information only. For satisfactory operation, external static pressure must not exceed value shown on rating plate. The shaded area indicates ranges in excess of maximum external static pressure allowed when heating. The data for 0.6" w.c. to 0.8" w.c. is shown for air conditioning purposes only. 6. The above chart is for U.S. furnaces installed at feet. At higher altitudes, a properly de-rated unit will have approximately the same temperature rise at a particular FM, while the ESP at that FM will be lower.

13 OWER PERFMANE SPEIFIATIONS BTU OUTPUT vs TEMPERATURE RISE HART 600 FM FM FMULAS BTU OUTPUT = FM x.08 x RISE RISE = BTU OUTPUT.08 FM OUTPUT BTU/HR x 000 TEMPERATURE RISE 3

14 WIRING DIAGRAMS [0453,0704,0905]*XAB [0703,0904,55]*XA HIGH VOLTAGE! DISONNET ALL POWER BEFE SERVIING INSTALLING THIS UNIT. MULTIPLE POWER SOURES MAY BE PRESENT. FAILURE TO DO SO MAY AUSE PROPERTY DAMAGE, PERSONAL INJURY DEATH. 4V THERMOSTAT ONNETIONS G R W DIAGNOSTI LED 5 VA HOT AND PARK TERMINALS SWITH IRUIT ONNET HOT SURFAE IGNITER 4 VA 5 VA HEAT-H OWER OMPARTMENT BURNER OMPARTMENT BR BR OOL-H APAIT N O 4 VA HUMIDIFIER SEE NOTE 4 (HI) (MED) (MED LOW) (LOW) PM LINE-H HI BR GAS VALVE INDUED DRAFT OWER XFMR-H 4 VA HUMIDIFIER STEADY ON = NMAL OPERATION OFF = ONTROL FAILURE FLASH = 3 MANUAL RESET AUXILIARY LIMITS () IN UPFLOW OWER DEK () IN 'FLOW OWER HOUSING VA NEUTRAL TERMINALS N O PU FRONT OVER SWITH FLASHES = SWITH STUK LOSED 3 FLASHES = SWITH STUK OPEN 4 FLASHES = OPEN HIGH LIMIT 5 FLASHES = FLAME SENSE WITHOUT GAS VALVE 6 FLASHES = INTEGRATED ONTROL MODULE ON FUSE OFF ND STAGE DELAY MODE HEAT OFF DELAY FATY SETTINGS SHOWN * 7 FLASHES = LOW FLAME SIGNAL Y SEE NOTE 6 * * * 3 GR 8 8 FLASHES = HEK IGNITER IMPROPER GROUNDING FS ONTINUOUS/RAPID FLASHES = REVERSED 5 VA POLARITY BR PU GR BR GR OWER OMPARTMENT DO SWITH (OPEN EN DO OPEN) 4V THERMOSTAT ONNETIONS INTEGRATED ONTROL MODULE FLAME SENS G Y W R TO MIRO TH (3) XFMR-H LINE-H JUNTION BOX DO SWITH LOW VOLTAGE (4V) LOW VOLTAGE FIELD HI VOLTAGE (5V) HI VOLTAGE FIELD JUNTION TERMINAL INTERNAL TO INTEGRATED ONTROL PLUG ONNETION FS IGN IND EA-H TR (6) (8) MV (9) MVH () MVL() PS (0) PSO (4) HLI (7) HLO () RO () RO (5) HUMIDIFIER NO HOT SURFAE IGNITER LO HEAT-H HI HEAT-H FLAME SENS ID WR FRONT OVER SWITH OOL-H 4 VA 5 VA IRULAT WR ELETRONI AIR LEANER JUNTION BOX L N INTEGRATED ONTROL MODULE 40 VA TRANSFMER DISONNET OVERURRENT PROTETION DEVIE NO N L PM EQUIPMENT FIELD FIELD SPLIE SWITH (TEMP.) IGNITER SWITH (PRESS.) OVERURRENT PROT. DEVIE GAS HI VALVE SWITH TO 5VA/ Ø /60 HZ POWER SUPPLY WITH LINE NEUTRALS INTEGRATED ONTROL MODULE OL ODES: YELLOW ANGE PU PURPLE GN GREEN AK PINK BR BROWN ITE UE GRAY RED 040F0059 REV. A NOTES:. SET HEAT ANTIIPAT ON ROOM THERMOSTAT AT 0.7 AMPS.. MANUFATURER'S SPEIFIED REPLAEMENT PARTS MUST BE USED EN SERVIING. 3. IF ANY OF THE IGINAL WIRE AS SUPPLIED WITH THE FURNAE MUST BE REPLAED, IT MUST BE REPLAED WITH WIRING MATERIAL HAVING A TEMPERATURE RATING OF AT LEAST 05. USE OPPER ONDUTS ONLY. 4. IF HEATING AND OOLING OWER SPEEDS ARE NOT THE SAME, DISA JUMPER BEFE ONNETING OWER LEADS.UNUSED OWER LEADS MUST BE PLAED ON "PARK" TERMINALS OF INTEGRATED ONTROL TAPED. 5. UNIT MUST BE PERMANENTLY GROUNDED AND ONFM TO N.E.. AND LOAL ODES. 6. TO REALL THE LAST 5 FAULTS, MOST REENT TO LEAST REENT, DEPRESS SWITH F ME THAN SEONDS ILE IN STANDBY (NO THERMOSTAT INPUTS) 4 Wiring is subject to change, always refer to the wiring diagram on the unit for the most up-to-date wiring.

15 WIRING DIAGRAMS [0453,0704,0905]*XA [0703,0904,55]*XAD 4 VA HUMIDIFIER 4 VA 5 VA 4V THERMOSTAT ONNETIONS G R W Y 40 VA TRANSFMER OWER OMPARTMENT DO SWITH (OPEN EN DO OPEN) HUMIDIFIER TR (6) (8) MV (9) MVH () MVL() NO FRONT OVER SWITH INTEGRATED ONTROL MODULE GAS HI VALVE PM SWITH HIGH VOLTAGE! DISONNET ALL POWER BEFE SERVIING INSTALLING THIS UNIT. MULTIPLE POWER SOURES MAY BE PRESENT. FAILURE TO DO SO MAY AUSE PROPERTY DAMAGE, PERSONAL INJURY DEATH. BR BR DIAGNOSTI LED 5 VA HOT AND PARK TERMINALS OOL-H APAIT SWITH IRUIT ONNET HOT SURFAE IGNITER HEAT-H OWER OMPARTMENT BURNER OMPARTMENT OFF N O INTEGRATED ONTROL MODULE ON FUSE OFF SEE NOTE 4 (HI) (MED) (MED LOW) (LOW) IRULAT OWER AUTO RESET PRIMARY LIMIT ONTROL HI LINE-H INDUED DRAFT OWER ND STAGE DELAY MODE HEAT OFF DELAY FATY SETTINGS *SHOWN SEE NOTE 6 * * * BR MANUAL RESET ROLLOUT LIMIT ONTROL(S) 4 VA ( SINGLE ONTROL ON 45K BTU ) HUMIDIFIER FRONT OVER N SWITH PM O GR STEADY ON = NMAL OPERATION XFMR-H = ONTROL FAILURE 3 3 TERMINALS MANUAL RESET AUXILIARY LIMITS () IN UPFLOW OWER DEK () IN 'FLOW OWER HOUSING PU GAS VALVE (HONEY WELL) GR FLASH = SYSTEM LOKOUT (RETRIES EXEEDED) FLASHES = SWITH STUK LOSED 3 FLASHES = SWITH STUK OPEN 4 FLASHES = OPEN HIGH LIMIT 5 FLASHES = FLAME SENSE WITHOUT GAS VALVE 6 FLASHES = OPEN ROLLOUT OPEN FUSE 7 FLASHES = LOW FLAME SIGNAL 8 FLASHES = HEK IGNITER IMPROPER GROUNDING ONTINUOUS/RAPID FLASHES = REVERSED 5 VA POLARITY FS 4 BR PU GR BR FLAME SENS G Y W R TH (3) LINE-H DO SWITH LOW VOLTAGE (4V) LOW VOLTAGE FIELD HI VOLTAGE (5V) HI VOLTAGE FIELD JUNTION TERMINAL INTERNAL TO INTEGRATED ONTROL JUNTION BOX WARNING: DISONNET POWER DISONNET BEFE SERVIING. WIRING TO UNIT MUST BE PROPERLY POLARIZED AND GROUNDED. L N TO 5VA/ Ø /60 HZ POWER SUPPLY WITH JUNTION BOX TO MIRO XFMR-H PLUG ONNETION FS IGN IND EA-H PS (0) PSO (4) HLI (7) HLO () RO () RO (5) LO HEAT-H OOL-H HI HEAT-H MANUAL RESET AUXILIARY LIMIT ONTROLS MANUAL RESET ROLLOUT LIMIT ONTROL(S) (SINGLE ONTROL ON 45K BTU) FLAME SENS HOT SURFAE IGNITER ID WR 4 VA 5 VA IRULAT WR ELETRONI AIR LEANER OVERURRENT PROTETION DEVIE WARNING:DISONNET POWER BEFE SERVIING.WIRING TO UNIT MUST BE PROPERLY POLARIZED AND GROUNDED. DISONNET 40 VA TRANSFMER N L NO EQUIPMENT FIELD FIELD SPLIE SWITH (TEMP.) IGNITER SWITH (PRESS.) OVERURRENT PROT. DEVIE AUTO RESET PRIMARY LIMIT ONTROL INTEGRATED ONTROL MODULE TO 5 VA / Ø / 60HZ POWER SUPPLY WITH OVERURRENT PROTETION DEVIE OL ODES: YELLOW ANGE PU PURPLE GN GREEN AK PINK BR BROWN ITE UE GRAY RED 040F00663 REV. A NOTES:. SET HEAT ANTIIPAT ON ROOM THERMOSTAT AT 0.7 AMPS.. MANUFATURER'S SPEIFIED REPLAEMENT PARTS MUST BE USED EN SERVIING. 3. IF ANY OF THE IGINAL WIRE AS SUPPLIED WITH THE FURNAE MUST BE REPLAED, IT MUST BE REPLAED WITH WIRING MATERIAL HAVING A TEMPERATURE RATING OF AT LEAST 05. USE OPPER ONDUTS ONLY. 4. IF HEATING AND OOLING OWER SPEEDS ARE NOT THE SAME, DISA JUMPER BEFE ONNETING OWER LEADS. UNUSED OWER LEADS MUST BE PLAED ON "PARK" TERMINALS OF INTEGRATED ONTROL TAPED. 5. UNIT MUST BE PERMANENTLY GROUNDED AND ONFM TO N.E.. AND LOAL ODES. 6. TO REALL THE LAST 5 FAULTS, MOST REENT TO LEAST REENT, DEPRESS SWITH F ME THAN SEONDS ILE IN STANDBY (NO THERMOSTAT INPUTS) Wiring is subject to change, always refer to the wiring diagram on the unit for the most up-to-date wiring. 5

GMH95/GCH9 MULTI-POSITION, DUAL$AVER CONVERTIBLE, MULTI-SPEED GAS FURNACE

GMH95/GCH9 MULTI-POSITION, DUAL$AVER CONVERTIBLE, MULTI-SPEED GAS FURNACE 95%/93% AFUE HEATING INPUT: 46,000 5,000 BTU/H Standard Features / MULTI-POSITION, DUAL$AVER ONVERTIBLE, MULTI-SPEED GAS FURNAE The Goodman / 95%/93% AFUE Dual$aver onvertible, Multi-Speed, Multi-Position

More information

GKS9 40" 90% Gas Furnaces

GKS9 40 90% Gas Furnaces TECHNICAL MANUAL AL 40" 90% Gas Furnaces Refer to Service Manual RS6610004* for installation, operation, and troubleshooting information. All safety information must be followed as provided in the Service

More information

GCVC96 (B) Two-Stage, Variable-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h

GCVC96 (B) Two-Stage, Variable-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h (B) Heating Input: 0,000 0,000 BTU/h Two-Stage, Variable-Speed EM Gas Furnace Up to 9% AFUE ontents Nomenclature... Accessories... Product Specifications... Dimensions... flow Specifications...5 Wiring

More information

GCVC96 (B) Two-Stage, Variable-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h

GCVC96 (B) Two-Stage, Variable-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h (B) Heating Input: 0,000 0,000 BTU/h Two-Stage, Variable-Speed EM Gas Furnace Up to 9% AFUE ontents Nomenclature... Accessories... Product Specifications... Dimensions... flow Specifications...5 Wiring

More information

GME8. Two-Stage Convertible, Multi-Speed ECM Gas Furnace 80% AFUE. Heating Input: 60, ,000 BTU/h

GME8. Two-Stage Convertible, Multi-Speed ECM Gas Furnace 80% AFUE. Heating Input: 60, ,000 BTU/h Two-Stage onvertible, Multi-Speed EM Gas Furnace 80% AFUE Heating Input: 60,000 100,000 BTU/h ontents Nomenclature... 2 Product Specifications... 3 Dimensions... 4 Airflow Data... 5 Wiring Diagrams...

More information

GMVC96 (B) Two-Stage, Variable-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h

GMVC96 (B) Two-Stage, Variable-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h (B) Heating Input: 0,000 0,000 BTU/h Two-Stage, Variable-Speed EM Gas Furnace Up to 9% AFUE ontents Nomenclature... Accessories... Product Specifications... Dimensions... flow Data... Wiring Diagrams...

More information

AMVM97 (B) / ACVM97 (B)

AMVM97 (B) / ACVM97 (B) (B) / (B) Heating Input: 60,000 0,000 BTU/h Modulating, Variable-Speed EM Gas Furnace Up to 98% AFUE ontents Nomenclature... Product Specifications... Dimensions... 4 flow Specifications... 6 Wiring Diagram...

More information

ComfortNet -Compatible

ComfortNet -Compatible GMV8 omfortnet -ompatible Two-Stage, Variable-Speed Gas Furnace 80% AFUE Heating Input: 60,000 00,000 BTU/h Standard Features Aluminized steel, dual-diameter tubular heat exchanger Two-stage gas valve

More information

TECHNICAL MANUAL. GMS8 33-3/8" 80% Gas Furnace Units 80% AFUE, Single Stage, Multi-Speed, Upflow Horizontal

TECHNICAL MANUAL. GMS8 33-3/8 80% Gas Furnace Units 80% AFUE, Single Stage, Multi-Speed, Upflow Horizontal TECHNICAL MANUAL AL GMS8 33-3/8" 80% Gas Furnace Units 80% AFUE, Single Stage, Multi-Speed, Upflow Horizontal Refer to Service Manual RS6612006for troubleshooting information. All safety information must

More information

TECHNICAL MANUAL. GMH8 39" 80% Gas Furnace 80% AFUE, 2-Stage (Convertible), Multi-Speed, Upflow/Horizontal

TECHNICAL MANUAL. GMH8 39 80% Gas Furnace 80% AFUE, 2-Stage (Convertible), Multi-Speed, Upflow/Horizontal TECHNICAL MANUAL AL GMH8 39" 80% Gas Furnace 80% AFUE, 2-Stage (Convertible), Multi-Speed, Upflow/Horizontal Refer to Service Manual RS660004 for installation, operation, and troubleshooting information.

More information

GMSS96 / GCSS96 Single-Stage Multi-Speed Gas Furnace

GMSS96 / GCSS96 Single-Stage Multi-Speed Gas Furnace Heating Input: 40,000 120,000 BTU/h / Single-Stage Multi-Speed Gas Furnace up to 96% AFUE Standard Features Heavy-duty aluminized-steel tubular heat exchanger Stainless-steel secondary heat exchanger Single-stage

More information

GMSS92 / GCSS92. Single-Stage, Multi-Speed Gas Furnace Up to 92% AFUE. Heating Input: 40, ,000 BTU/h

GMSS92 / GCSS92. Single-Stage, Multi-Speed Gas Furnace Up to 92% AFUE. Heating Input: 40, ,000 BTU/h / Heating Input: 40,000 120,000 BTU/h Single-Stage, Multi-Speed Gas Furnace Up to 92% AFUE Contents Nomenclature...2 Product Specifications...3 Dimensions...5 flow Specifications...7 Wiring Diagram...10

More information

TECHNICAL MANUAL. ADVC8/AMVC8 GMVC8 80% Gas Furnace Units

TECHNICAL MANUAL. ADVC8/AMVC8 GMVC8 80% Gas Furnace Units TEHNIAL MANUAL AL TM ADV8/AMV8 GMV8 80% Gas Furnace Units Refer to Service Manual RS660004 for installation, operation, and troubleshooting information. All safety information must be followed as provided

More information

GMSS92 / GCSS92. Single-Stage, Multi-Speed Gas Furnace Up to 92% AFUE. Heating Input: 40, ,000 BTU/h

GMSS92 / GCSS92. Single-Stage, Multi-Speed Gas Furnace Up to 92% AFUE. Heating Input: 40, ,000 BTU/h / Single-Stage, Multi-Speed Gas Furnace Up to 92% AFUE Heating Input: 40,000 120,000 BTU/h Contents Nomenclature...2 Product Specifications...3 Dimensions...5 Airflow Specifications...7 Wiring Diagram...10

More information

GMSS96 / GCSS96. Single-Stage, Multi-Speed Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h

GMSS96 / GCSS96. Single-Stage, Multi-Speed Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h / Heating Input: 40,000 120,000 BTU/h Single-Stage, Multi-Speed Gas Furnace Up to 96% AFUE Contents Nomenclature...2 Product Specifications...3 Dimensions...5 flow Specifications...7 Wiring Diagram...10

More information

TECHNICAL MANUAL. AMS8 33-3/8" Gas Furnace Units 80% AFUE, Single Stage, Multi-Speed, Upflow Horizontal

TECHNICAL MANUAL. AMS8 33-3/8 Gas Furnace Units 80% AFUE, Single Stage, Multi-Speed, Upflow Horizontal TECHNICAL MANUAL AL AMS8 33-3/8" Gas Furnace Units 80% AFUE, Single Stage, Multi-Speed, Upflow Horizontal Refer to Service Manual RS6612006 for troubleshooting information. Refer to the appropriate Parts

More information

GMSS96 / GCSS96. Single-Stage, Multi-Speed Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h

GMSS96 / GCSS96. Single-Stage, Multi-Speed Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h / Heating Input: 40,000 120,000 BTU/h Single-Stage, Multi-Speed Gas Furnace Up to 96% AFUE Contents Nomenclature...2 Product Specifications...3 Dimensions...5 flow Specifications...7 Wiring Diagram...10

More information

TECHNICAL MANUAL. GMS8 33-3/8" Gas Furnace Units 80% AFUE, Single Stage, Multi-Speed, Upflow Horizontal

TECHNICAL MANUAL. GMS8 33-3/8 Gas Furnace Units 80% AFUE, Single Stage, Multi-Speed, Upflow Horizontal TECHNICAL MANUAL AL GMS8 33-3/8" Gas Furnace Units 80% AFUE, Single Stage, Multi-Speed, Upflow Horizontal Refer to Service Manual RS6612006 for troubleshooting information. Refer to the appropriate Parts

More information

DM80HE. Two-Stage Convertible Multi-Speed ECM Gas Furnace 80% AFUE. Heating Input: 60, ,000 BTU/h

DM80HE. Two-Stage Convertible Multi-Speed ECM Gas Furnace 80% AFUE. Heating Input: 60, ,000 BTU/h Two-Stage Convertible Multi-Speed ECM Gas Furnace 80% AFUE Heating Input: 60,000 100,000 BTU/h Contents Nomenclature... 2 Product Specifications... 3 Dimensions... 4 Airflow Data... 5 Wiring Diagram...

More information

TECHNICAL MANUAL. ADVC8/AMVC8 GMVC8 80% Gas Furnace Units

TECHNICAL MANUAL. ADVC8/AMVC8 GMVC8 80% Gas Furnace Units TEHNIAL MANUAL AL TM ADV8/AMV8 GMV8 80% Gas Furnace Units Refer to Service Manual RS600004 for installation, operation, and troubleshooting information. All safety information must be followed as provided

More information

80% AFUE. Multi-Position, Dual$aver. Heating Input: 70, ,000 BTU/h

80% AFUE. Multi-Position, Dual$aver. Heating Input: 70, ,000 BTU/h Series 80% AFUE Multi-Position, Dual$aver Multi-Speed Gas Furnace Heating Input: 70,000 115,000 BTU/h Standard Features Dual-diameter tubular heat exchanger Two-stage gas valve that allows installer to

More information

ADSH8. Two-Stage Convertible. Heating Input: 40, ,000 BTU/h

ADSH8. Two-Stage Convertible. Heating Input: 40, ,000 BTU/h ADSH8 Heating Input: 40,000 100,000 BTU/h Two-Stage Convertible Multi-Speed Gas Furnace 80% AFUE Standard Features Two-stage convertible gas valve automatically adjusts to high or low stage Durable SureStart

More information

Technical Information

Technical Information A I R COMMA ND GAS FURNACE Technical Information 40" 80% Gas Furnaces GUIC EA/EX Refer to Service Manual RS660000 Rev. 2 for installation, operation, and troubleshooting information. All safety information

More information

TECHNICAL INFORMATION MANUAL

TECHNICAL INFORMATION MANUAL TECHNICAL INFORMATION MANUAL GDS8, GMS8, GHS8 40" 80% Gas Furnace Units Models listed on page 3 Refer to Service Manual RS6610004 for installation, operation, and troubleshooting information. All safety

More information

TECHNICAL MANUAL. ACVC9/AMVC95 GCVC9/GMVC95 90% UP TO 96% Gas Furnace Units

TECHNICAL MANUAL. ACVC9/AMVC95 GCVC9/GMVC95 90% UP TO 96% Gas Furnace Units TEHNIAL MANUAL AL TM AV9/AMV95 GV9/GMV95 90% UP TO 96% Gas Furnace Units Refer to Service Manual RS6612002 for troubleshooting information. Refer to the appropriate Parts atalog for part number information.

More information

TECHNICAL INFORMATION MANUAL

TECHNICAL INFORMATION MANUAL TECHNICAL INFORMATION MANUAL AMS9/ACS9 40" 90% Gas Furnace Model and Manufacturing numbers listed on page 3. Refer to Service Manual RS660000x for installation, operation, and troubleshooting information.

More information

GMVC96. Two-Stage, Variable-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h

GMVC96. Two-Stage, Variable-Speed ECM Gas Furnace Up to 96% AFUE. Heating Input: 40, ,000 BTU/h Heating Input: 0,000 0,000 BTU/h Two-Stage, Variable-Speed EM Gas Furnace Up to 96% AFUE ontents Nomenclature... Accessories... Product Specifications... Dimensions... flow Data... Wiring Diagrams... 0

More information

GMS9/GCS9 SERIES 93% AFUE

GMS9/GCS9 SERIES 93% AFUE GMS9/GCS9 SERIES 93% AFUE Multi-Position, Single-Stage/Multi-Speed Gas Furnace Heating Capacity: 46,000 115,000 BTUH The GMS9/GCS9 single-stage, multi-speed gas furnaces offer installation versatility.

More information

GME8 80% AFUE. Multi-Position, TwinComfort. Heating Input: 60, ,000 BTU/h

GME8 80% AFUE. Multi-Position, TwinComfort. Heating Input: 60, ,000 BTU/h 80% AFUE Multi-Position, TwinComfort Multi-Speed Gas Furnace Heating Input: 60,000 100,000 BTU/h Standard Features Patented dual-diameter tubular heat exchanger Two-stage gas valve that allows installer

More information

GME8 33-3/8" 80% Gas Furnace Upflow/Horizontal

GME8 33-3/8 80% Gas Furnace Upflow/Horizontal TECHNICAL MANUAL AL GME8 33-3/8" 80% Gas Furnace Upflow/Horizontal Refer to current Service Manual RS6610004 for installation, operation, and troubleshooting information. All safety information must be

More information

LRP14HP/LRP14DF/LRP14AC/LRP14GE/LRP16GE/LRP16HP SERIES UNITS

LRP14HP/LRP14DF/LRP14AC/LRP14GE/LRP16GE/LRP16HP SERIES UNITS Service Literature orp. 1501-L2 August 2016 Revised March 2017 LRP14HP/DF/A/GE LRP16GE/HP 2 to 5 Ton (7.0 to 17.6 kw) LRP14HP/LRP14DF/LRP14A/LRP14GE/LRP16GE/LRP16HP SERIES UNITS The LRP14/16 series packaged

More information

TECHNICAL GUIDE. Acclimate MODELS: FL9S GAS-FIRED CONDENSING / HIGH EFFICIENCY UPFLOW SINGLE STAGE FURNACES 92% AFUE

TECHNICAL GUIDE. Acclimate MODELS: FL9S GAS-FIRED CONDENSING / HIGH EFFICIENCY UPFLOW SINGLE STAGE FURNACES 92% AFUE TEHNIAL GUIDE Acclimate MODELS: FL9S GAS-FIRED ONDENSING / HIGH EFFIIENY UPFLOW SINGLE STAGE FURNAES 92% AFUE NATURAL GAS 40-135 MBH INPUT EFFIIENY RATING ERTIFIED ISO 9001 ertified Quality Management

More information

GMS95 GAS $AVER PRODUCT SPECIFICATIONS 95% AFUE. Multi-Position, Single-Stage/Multi-Speed Gas Furnace. Heating Capacity: 46, ,000 BTUH

GMS95 GAS $AVER PRODUCT SPECIFICATIONS 95% AFUE. Multi-Position, Single-Stage/Multi-Speed Gas Furnace. Heating Capacity: 46, ,000 BTUH GMS95 GAS $AVER 95% AFUE Multi-Position, Single-Stage/Multi-Speed Gas Furnace Heating Capacity: 46,000 115,000 BTUH 95% AFUE s Qualify for a $150 Tax Credit Standard Features Corrosion-resistant, aluminized-steel

More information

ACNF Series Ceiling-Mount Air Handlers 1½ to 2½ Tons

ACNF Series Ceiling-Mount Air Handlers 1½ to 2½ Tons ANF Series eiling-mount Air Handlers 1½ to 2½ Tons Standard Features Suitable for use with refrigerants R-410A and R-22 heck flowrater for heat pump and cooling-only applications All-Aluminum tube/aluminum

More information

TECHNICAL GUIDE MODELS: P*DH GAS-FIRED CONDENSING / HIGH EFFICIENCY DOWNFLOW / HORIZONTAL FURNACES 91 AFUE DESCRIPTION WARRANTY FEATURES

TECHNICAL GUIDE MODELS: P*DH GAS-FIRED CONDENSING / HIGH EFFICIENCY DOWNFLOW / HORIZONTAL FURNACES 91 AFUE DESCRIPTION WARRANTY FEATURES 036-1354-001 Rev. D (110) Heating TECHNICAL GUIDE MODELS: P*DH GAS-FIRED CONDENSING / HIGH EFFICIENCY DOWNFLOW / HORIZONTAL FURNACES 91 AFUE NATURAL GAS 37-111 MBH OUTPUT Air Conditioning EFFICIENCY RATING

More information

ASUF Series. Multi-Position, Multi-Speed ECM-Based Air Handler 1½ to 5 Tons. Contents. Product Features

ASUF Series. Multi-Position, Multi-Speed ECM-Based Air Handler 1½ to 5 Tons. Contents. Product Features ASUF Series Multi-Position, Multi-Speed EM-Based Air Handler ½ to Tons ontents Air Handler Nomenclature... Heater Kit Nomenclature... Product Specifications... Dimensions... Heat Kit Data... Wiring Diagram...

More information

FORM NO. G REV. 4 Supersedes Form No. G Rev. 3

FORM NO. G REV. 4 Supersedes Form No. G Rev. 3 FORM NO. G66-538 REV. 4 Supersedes Form No. G66-536 Rev. 3 W95T- SERIES Models with Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] MULTI-POSITION GAS FURNACES Features 95% residential gas furnace

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Model PGF1RA Series M1010 Product Line High Efficiency / Upflow / Horizontal Gas Furnace Induced Draft - 80+ AFUEurnace 2 10 YEAR WARRANTY WORRY-FREE PERFORMANCE 5 YEAR DEPENDABILITY

More information

H9MPV. 2- Stage Variable Speed 90. Flexibility. Quality. Comfort. Efficiency. Service (7/2004)

H9MPV. 2- Stage Variable Speed 90. Flexibility. Quality. Comfort. Efficiency. Service (7/2004) H9MPV 2- Stage Variable Speed 9 Flexibility Dual Certified venting (1 or 2 pipe). Direct Vent Furnace 4 high with wider cabinets, for noise reduction and ease of installation. Factory shipped as natural

More information

Ruud Achiever Plus Series Multi-position Gas Furnaces

Ruud Achiever Plus Series Multi-position Gas Furnaces Gas Furnaces Ruud Achiever Plus Series Multi-position Gas Furnaces R92T- Series 92% A.F.U.E. Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] A.F.U.E. (Annual Fuel Utilization Efficiency) calculated

More information

Multi-Position Gas Furnaces

Multi-Position Gas Furnaces MODEL: Multi-Position Gas Furnaces FORM NO. GSC-552 Rev. 1 Sure Comfort 92% A.F.U.E. Multi-Position Gas Furnaces Models with Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] 92% residential gas furnace

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS TM TECHNICAL SPECIFICATIONS Model PGF1TE 2 Stage Series Upflow/Horizontal M1010 Product Line High Efficiency / 95.1 AFUE Direct Vent or Non Direct Vent Condensing Furnace 10 YEAR WARRANTY WORRY-FREE PERFORMANCE

More information

Wt. Lbs Model Number (BTUH) Hz

Wt. Lbs Model Number (BTUH) Hz Up to 96% AFUE, Two Stage ECM Gas Furnace EASIER TO SELL Up to 96% AFUE in upflow and horizontal positions F95% AFUE in downflow position California NOx approved Most models have earned the ENERGY STAR

More information

AVPTC. Air Handlers 1½ to 5 Tons

AVPTC. Air Handlers 1½ to 5 Tons Multi-Position, Variable-Speed Air Handlers ½ to Tons Standard Features Compatible with the ComfortNet Communicating System family of products R-0A refrigerant-compatible Factory-installed thermal expansion

More information

G60UH(X) WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

G60UH(X) WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature Service Literature Corp. 0204 L2 Revised 11 2006 G60UH(X) G60UH(X) SERIES UNITS G60UH(X) series units are mid efficiency gas furnaces used for upflow or horizontal applications only, manufactured with

More information

W92P- SERIES Models with Input Rates from 40 to 115 kbtu [11.72 to kw] (92% A.F.U.E. )

W92P- SERIES Models with Input Rates from 40 to 115 kbtu [11.72 to kw] (92% A.F.U.E. ) FORM NO. G66-536 REV. 5 Supersedes Form No. G66-536 Rev. 3 W92P- SERIES Models with Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] (92% A.F.U.E. ) MULTI POSITION GAS FURNACES Features 92% residential

More information

Product Data. 95% AFUE Single Stage Furnace Upflow / Downflow / Horizontal. ama ! WARNING

Product Data. 95% AFUE Single Stage Furnace Upflow / Downflow / Horizontal. ama ! WARNING DIRECT OR NON -DIRECT VENT 4-WAY MULTIPOISE CONDENSING GAS FURNACE 95% AFUE Single Stage Furnace Upflow / Downflow / Horizontal FLEXIBILITY S Dual certified venting (1 or 2 pipes) Direct Vent furnace S

More information

M3RL Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. High Efficiency / Direct Vent Condensing Downflow Gas Furnace

M3RL Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. High Efficiency / Direct Vent Condensing Downflow Gas Furnace TECHNICAL SPECIFICATIONS M3RL Series High Efficiency / Direct Vent Condensing Downflow Gas Furnace Induced Draft - 90+ AFUE Input 60,000 & 80,000 Btuh The high efficiency downflow gas furnace is especially

More information

FG7T (C and L Series)

FG7T (C and L Series) TECHNICAL SPECIFICATIONS FG7T (C and L Series) WARRANTY Smartlite Two Stage, Variable Speed, Condensing Upflow/Horizontal and Downflow Gas Furnaces Induced Draft - 95.1 AFUE Input 60,000-120,000 Btuh The

More information

80% Variable Speed, Two Stage Heating Furnace. Cooling Capacity CFM in. w.c. (125 Pa)

80% Variable Speed, Two Stage Heating Furnace. Cooling Capacity CFM in. w.c. (125 Pa) 80% Variable Speed, Two Stage Heating Furnace EASIER TO SELL 80% AFUE Series B approved for Twinning applications (0902116, 1002122, and 1352422) with accessory (order separately) Supports two stage cooling

More information

TECHNICAL GUIDE MODELS: P*UR GAS-FIRED CONDENSING / HIGH EFFICIENCY UPFLOW FURNACES 92 AFUE DESCRIPTION WARRANTY FEATURES Rev.

TECHNICAL GUIDE MODELS: P*UR GAS-FIRED CONDENSING / HIGH EFFICIENCY UPFLOW FURNACES 92 AFUE DESCRIPTION WARRANTY FEATURES Rev. 036-1349-001 Rev. A (30) Heating TECHNICAL GUIDE MODELS: P*UR GAS-FIRED CONDENSING / HIGH EFFICIENCY UPFLOW FURNACES 9 AFUE NATURAL GAS 37-130 MBH OUTPUT Air Conditioning EFFICIENCY RATING CERTIFIED R

More information

T9MPV. 2- Stage Variable Speed 90. Flexibility. Comfort. Efficiency. Quality. Service (05/2006)

T9MPV. 2- Stage Variable Speed 90. Flexibility. Comfort. Efficiency. Quality. Service (05/2006) T9MPV 2- Stage Variable Speed 9 Flexibility Dual Certified venting (1 or 2 pipe), Direct Vent Furnace 4 high with wider cabinets, for ease of installation. Factory shipped as natural gas, with LP Gas conversion

More information

MULTI POSITION GAS FURNACE

MULTI POSITION GAS FURNACE FORM NO. GFJ-552 MULTI POSITION GAS FURNACE 92% A.F.U.E. Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] Features 92% residential gas furnace CSA certified 4 way multi-poise design 7-Segment LED all

More information

TZ95MSX SERIES Model with Input Rates from 40 to 115 kbtu [11.72 to kw] (All Models 95% A.F.U.E. )

TZ95MSX SERIES Model with Input Rates from 40 to 115 kbtu [11.72 to kw] (All Models 95% A.F.U.E. ) FORM NO. GTZ-538 Supersedes Form No. GTZ-503 Rev. 1 TZ95MSX SERIES Model with Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] (All Models 95% A.F.U.E. ) 95% A.F.U.E. MULTI POSITION GAS FURNACES Features

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Model PGC2T (C and L) Series SmartStart M1200 Product Line Two Stage, Variable Speed, High Efficiency Upflow/Horizontal and Downflow Gas Furnaces 95.1 AFUE Input 60,000-120,000

More information

FG6T(C,L) Series. High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas Furnace with Variable Speed Blower TECHNICAL SPECIFICATIONS

FG6T(C,L) Series. High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas Furnace with Variable Speed Blower TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS FG6T(C,L) Series High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas with Variable Speed Blower 92+ Upflow/Horizontal 90+ Downflow The high effi ciency 2-Stage

More information

G71MPP WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

G71MPP WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature Service Literature Corp. 0804 L2 Revised 05 05 2008 G71MPP G71MPP SERIES UNITS G71MPP series units are high efficiency multi position (upflow, downflow, horizontal right and left) gas furnaces equipped

More information

MULTI POSITION GAS FURNACE

MULTI POSITION GAS FURNACE FORM NO. GFJ-537 MULTI POSITION GAS FURNACE FF***PS95 Series 95% A.F.U.E. Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] Features 95% residential gas furnace CSA certified 4 way multi-poise design

More information

13 GEP A L P - 1 A

13 GEP A L P - 1 A PRODUCT SPECIFICATIONS PACKAGED GAS / ELECTRIC 3GEP MERIT SERIES Residential - R-40A Bulletin No. 20602 December 202 Supersedes October 202 SEER - 3.00 AFUE - 80% 2 to 5 Tons Cooling Capacity - 22,800

More information

AVPTC. Air Handler 1½ to 5 Tons

AVPTC. Air Handler 1½ to 5 Tons Multi-Position, Variable-Speed Air Handler ½ to 5 Tons Standard Features Compatible with the ComfortNet Communicating System family of products Maximum four low-voltage wires required for operation in

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Model PGF1TA 2 Stage Series Upflow/Horizontal M1010 Product Line High Efficiency / 80+ Upflow/Horizontal 2 Stage Gas Furnace with Variable Speed Blower 2 10 YEAR WARRANTY WORRY-FREE

More information

TZ96MDP SERIES Model with Input Rates from 40 to 115 kbtu [11.72 to kw] (All Models 96% A.F.U.E. )

TZ96MDP SERIES Model with Input Rates from 40 to 115 kbtu [11.72 to kw] (All Models 96% A.F.U.E. ) FORM NO. GTZ-539 REV. 2 Supersedes Form No. GTZ-503 Rev. 1 SERIES Model with Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] (All Models 96% A.F.U.E. ) TWO STAGE MULTI POSITION GAS FURNACES Features

More information

AVPTC Multi-Position, Internal Txv

AVPTC Multi-Position, Internal Txv Multi-Position, Internal Txv Variable-Speed ECM Based Comfortnet Compatible Air Handler 1½ to 5 Tons Contents Air Handler Nomenclature... Heater Kit Nomenclature......3 Dimensions...4 Airflow Data...5

More information

Series Two- Stage Multi-position Gas Furnaces. Ruud Achiever Plus. R96T- Series 96% A.F.U.E. * Input Rates from 40 to 115 kbtu [11.72 to 33.

Series Two- Stage Multi-position Gas Furnaces. Ruud Achiever Plus. R96T- Series 96% A.F.U.E. * Input Rates from 40 to 115 kbtu [11.72 to 33. Gas Furnaces Ruud Achiever Plus Series Two- Stage Multi-position Gas Furnaces - Series 96% A.F.U.E. * Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] A.F.U.E. (Annual Fuel Utilization Efficiency) calculated

More information

AVPTC. Multi-Position, Variable-Speed ECM Based Air Handler with Internal TXV ComfortNet Compatible 1½ to 5 Tons. Contents.

AVPTC. Multi-Position, Variable-Speed ECM Based Air Handler with Internal TXV ComfortNet Compatible 1½ to 5 Tons. Contents. Multi-Position, Variable-Speed ECM Based Air Handler with Internal TXV ComfortNet Compatible 1½ to 5 Tons Contents Air Handler Nomenclature... Heater Kit Nomenclature... Product Specifications... 3 Dimensions...

More information

Rheem Classic Series Multi-position Gas Furnaces

Rheem Classic Series Multi-position Gas Furnaces Gas Furnaces Rheem Classic Series Multi-position Gas Furnaces R95P- Series 95% A.F.U.E. Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance

More information

TECHNICAL GUIDE SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: F6FP DESCRIPTION FEATURES UTG-B-0409

TECHNICAL GUIDE SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: F6FP DESCRIPTION FEATURES UTG-B-0409 TEHNIAL UIDE SINLE PIEE AIR HANDLERS FOR USE WITH SPLIT-SSTEM OOLIN & HEAT PUMPS MODELS: F6FP018-060 DESRIPTION This fan coil unit provides the flexibility for installation in any upflow or horizontal

More information

AVPTC Multi-Position, Internal Txv

AVPTC Multi-Position, Internal Txv Product Features Internal factory-installed thermal expansion valves for cooling and heat pump applications Variable-speed ECM blower motor ComfortNet Communicating System compatible Auto configuration

More information

KG6TE Series. High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas Furnace with Variable Speed Blower TECHNICAL SPECIFICATIONS

KG6TE Series. High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas Furnace with Variable Speed Blower TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS KG6TE Series High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas with Variable Speed Blower 95.1 Upflow/Horizontal The high effi ciency 2-Stage gas furnace

More information

AE/AH R410A Window Air Conditioners & Heat Pumps

AE/AH R410A Window Air Conditioners & Heat Pumps TECHNICAL MANUAL AL AE/AH R410A Window Air Conditioners & Heat Pumps All safety information must be followed. See Installation instructions for more safety precautions. Refer to the appropriate Parts Catalog

More information

Product Data. 58RAV High-Efficiency Downflow/Horizontal Induced-Combustion Gas Furnace. 80% AFUE At Budget Price

Product Data. 58RAV High-Efficiency Downflow/Horizontal Induced-Combustion Gas Furnace. 80% AFUE At Budget Price Product Data 58RAV High-Efficiency Downflow/Horizontal Induced-ombustion Gas Furnace Input apacities: 50,000 thru 5,000 Btuh 80% AFUE At Budget Price DOWNFLOW HORIZONTAL arrier provides an 80% Annual Fuel

More information

50M56U-843 INSTALLER MUST READ DESCRIPTION PRECAUTIONS WARNING CAUTION

50M56U-843 INSTALLER MUST READ DESCRIPTION PRECAUTIONS WARNING CAUTION 50M56U-843 Universal Single Stage HSI Integrated Furnace Control Kit INSTALLATION INSTRUCTIONS INSTALLER MUST READ PAGE 3 CONTAINS WIRING HARNESS AND BLOWER CONNECTION INSTRUCTIONS FOR ALL APPLICATIONS

More information

Cooling Capacity CFM range

Cooling Capacity CFM range R9MSB Product Specifications 92.1% AFUE, Single Stage, PSC Gas Furnace EASIER TO SELL 92.1% AFUE all models in all positions California NOx approved Cabinet air leakage less than 2.0% at 1.0 in. W.C. and

More information

KG6RC Series TECHNICAL SPECIFICATIONS FEATURES AND BENEFITS

KG6RC Series TECHNICAL SPECIFICATIONS FEATURES AND BENEFITS TECHNICAL SPECIFICATIONS KG6RC Series High Efficiency / Direct Vent or Non Direct Vent Condensing Upflow/ Horizontal Gas Furnace Induced Draft - 92+ AFUE Input 40,000-120,000 Btuh The high effi ciency

More information

T9MPV SmartComfort VS90 Product Specifications

T9MPV SmartComfort VS90 Product Specifications 90+ Variable Speed Two -Stage Heating Furnace FLEXIBILITY Supports two--stage cooling units Dual Certified venting (1 or 2 pipe), Direct Vent Furnace 40 high with wider cabinets, for ease of installation

More information

TECHNICAL GUIDE SINGLE PIECE AIR HANDLERS DESCRIPTION FEATURES FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS

TECHNICAL GUIDE SINGLE PIECE AIR HANDLERS DESCRIPTION FEATURES FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS DESRIPTION This fan coil unit provides the flexibility for installation in any upflow or horizontal application. These versatile models may be used for split-system cooling or heat pump operation. ompact

More information

Rheem Classic Plus Series Multi position Gas Furnaces

Rheem Classic Plus Series Multi position Gas Furnaces Gas Furnaces Rheem Classic Plus Series Multi position Gas Furnaces R95T- Series 95% A.F.U.E. Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] A.F.U.E. (Annual Fuel Utilization Efficiency) calculated

More information

Cooling Capacity CFM in. w.c. (125 Pa)

Cooling Capacity CFM in. w.c. (125 Pa) 93% AFUE, Single Stage, PSC Gas Furnace EASIER TO SELL 93% AFUE, all models all positions F9MES 50 Hz Product Specifications Certified to leak 2% or less of nominal air conditioning CFM delivered when

More information

Cooling Capacity CFM in. w.c. (125 Pa)

Cooling Capacity CFM in. w.c. (125 Pa) R9MSB Product Specifications 92.1% AFUE, Single Stage, PSC Gas Furnace EASIER TO SELL 92.1% AFUE, all models all positions, California NOx approved Certified to leak 2% or less of nominal air conditioning

More information

RGE 13 A T - 1 A

RGE 13 A T - 1 A PRODUCT SPECIFICATIONS PACKAGED GAS / ELECTRIC 3GEP / RGE3 Rooftop Units 60HZ Bulletin No. 2063 December 202 Supersedes October 202 MODEL NUMBER IDENTIFICATION -PHASE MODELS SEER - 3.00 (3GEP Shown) AFUE

More information

TECHNICAL MANUAL. ARPT**14**, ARUF**14**, ASPT**14**, ASUF**14** Air Handlers

TECHNICAL MANUAL. ARPT**14**, ARUF**14**, ASPT**14**, ASUF**14** Air Handlers TECHNICAL MANUAL AL ARPT**4**, ARUF**4**, ASPT**4**, ASUF**4** Air Handlers Refer to Service Manual RS600006 for installation, operation & troubleshooting information. All safety information must be followed

More information

Rheem Classic Plus Series Two Stage Multi position Gas Furnaces

Rheem Classic Plus Series Two Stage Multi position Gas Furnaces Gas Furnaces Rheem Classic Plus Series Two Stage Multi position Gas Furnaces R96P- Series 96% A.F.U.E. * Input Rates from 60 to 100 kbtu [17.58 to 29.31 kw] A.F.U.E. (Annual Fuel Utilization Efficiency)

More information

Ruud Achiever Series Multi position Gas Furnaces

Ruud Achiever Series Multi position Gas Furnaces Gas Furnaces Ruud Achiever Series Multi position Gas Furnaces R92P- Series 92% A.F.U.E. Input Rates from 40 to 115 kbtu [11.72 to 33.71 kw] A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance

More information

TZ96MDV SERIES Model with Input Rates from 60 to 100 kbtu [17.58 to kw] (All Models 95% A.F.U.E. )

TZ96MDV SERIES Model with Input Rates from 60 to 100 kbtu [17.58 to kw] (All Models 95% A.F.U.E. ) FORM NO. GTZ-540 Supersedes Form No. GTZ-503 Rev. 1 TZ96MDV SERIES Model with Input Rates from 60 to 100 kbtu [17.58 to 29.31 kw] (All Models 95% A.F.U.E. ) TWO STAGE VARIABLE SPEED MULTI POSITION GAS

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! 21M51U-843 Universal Integrated Two-Stage 120Volt Hot Surface Ignition Control Kit INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS

More information

50A Integrated Furnace Control

50A Integrated Furnace Control Goodman White-Rodgers 0130F00005 PCBBF110 PCBBF123 50A55-743 0130F00005S PCBBF110S PCBBF123S 50A55-289 B1809926 PCBBF112 50T55-289 B1809926S PCBBF112S 50A55-743 Integrated Furnace Control INSTALLATION

More information

Product Data. 58EFA Horizontal Gas Furnace. 50, ,000 Btuh Input

Product Data. 58EFA Horizontal Gas Furnace. 50, ,000 Btuh Input Product Data 58EFA Horizontal Gas Furnace 50,000 125,000 Btuh Input GAS SUPPLY MANUAL SHUTOFF VALVE SEDIMENT TRAP UNION Carrier presents the 58EFA, a dedicated horizontal gas furnace that excels in the

More information

SLP98UHV WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

SLP98UHV WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature Service Literature Corp. 1029 L7 SLP98UHV SLP98UHV SERIES UNITS SLP98UHV series units are high efficiency upflow, horizontal right and left) gas furnaces equipped with variable capacity gas valve, variable

More information

40 Residential Gas Furnace Operation

40 Residential Gas Furnace Operation 40 Residential Gas Furnace Operation Model Evolution/Nomenclature Heating Sequence of Operation Schematics Ignition Systems Service/Troubleshooting American Standard Inc. 999 Preface Air Conditioning and

More information

TSTAT0201CW Recommended (sold separately)

TSTAT0201CW Recommended (sold separately) G9MVE QuietComfort ET 96 Product Specifications Up to 96% AFUE, Communicating, Two Stage Gas Furnace EASIER TO SELL Up to 96% AFUE, all models, all positions California NOx approved Series A2 (or greater)

More information

AVPTC Multi-Position, Internal Txv

AVPTC Multi-Position, Internal Txv Multi-Position, Internal Txv Variable-Speed ECM Based Comfortnet Compatible Air Handler 1½ to 5 Tons Contents Air Handler Nomenclature... Heater Kit Nomenclature...... Dimensions...4 Airflow Data...5 Heat

More information

G6RC Series TECHNICAL SPECIFICATIONS

G6RC Series TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS G6RC Series High Efficiency / Direct Vent or Non Direct Vent Condensing Upflow/ Horizontal Gas Furnace Induced Draft - 92+ AFUE Input 40,000-120,000 Btuh The high effi ciency upfl

More information

Bosch 80% AFUE Gas Furnace BGS80 Model

Bosch 80% AFUE Gas Furnace BGS80 Model Bosch 80% AFUE Gas Furnace BGS80 Model 4-Way Multipoise Category I Fan-Assisted Furnace User's Information Manual 3124627 2 Bosch 80% AFUE Gas Furnace User's Information Manual Data subject to change 06.2018

More information

Product Data PG9MXA 4-WAY MULTIPOISE TWO-STAGE CONDENSING GAS FURNACE

Product Data PG9MXA 4-WAY MULTIPOISE TWO-STAGE CONDENSING GAS FURNACE 4-WAY MULTIPOISE TWO-STAGE CONDENSING GAS FURCE Product Data A9801 Utilizing the extensive resources available to Payne, a new standard of excellence has been achieved with the model. The model is a unique

More information

VNE GAS FURNACE 2- STAGE VARIABLE SPEED UPFLOW/HORIZONTAL

VNE GAS FURNACE 2- STAGE VARIABLE SPEED UPFLOW/HORIZONTAL VNE GAS FURNACE 2- STAGE VARIABLE SPEED UPFLOW/HORIZONTAL 25--21--65 Representative photo only, some models may vary in appearance. MANUFACTURED FOR NATURAL GAS CONVERTIBLE TO (LP) PROPANE GAS NOTE: These

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! WHITE-RODGERS 50A55-286 Integrated Furnace Control INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! 031-01284-000/50A55-241 Integrated Furnace Control INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR

More information

50A Integrated Furnace Control

50A Integrated Furnace Control 50A56-956 Integrated Furnace Control INSTALLATION INSTRUCTIONS FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY

More information

TECHNICAL GUIDE SINGLE PIECE VARIABLE SPEED AIR HANDLERS DESCRIPTION FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS FEATURE MODELS: AVG24 THRU 60*(C)

TECHNICAL GUIDE SINGLE PIECE VARIABLE SPEED AIR HANDLERS DESCRIPTION FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS FEATURE MODELS: AVG24 THRU 60*(C) TEHNIAL UIDE SINLE PIEE VARIABLE SPEED AIR HANDLERS FOR USE WITH SPLIT-SYSTEM OOLIN & HEAT PUMPS MODELS: AV24 THRU 60*() DESRIPTION The Air Handler line offers the ultimate in comfort, sound and application

More information

TSTAT0101SC Recommended (order separately)

TSTAT0101SC Recommended (order separately) Up to 98% AFUE Communicating, Modulating Gas Furnace EASIER TO SELL 98% AFUE on G9MAC0602120, all positions 97% AFUE, all other models, all positions All Models have earned the ENERGY STAR Modulating heating

More information