WAEC Sample Questions and Schemes - Uploaded online by AIR-CONDITIONING AND REFRIGERATION
|
|
|
- Loreen Clarke
- 6 years ago
- Views:
Transcription
1 EXAMINATION SCHEME AIR-CONDITIONING AND REFRIGERATION There will be three papers, Papers 1, 2 and 3, all of which must be taken. Papers 1 and 2 shall be a composite paper to be taken at one sitting. PAPER 1: PAPER 2: PAPER 3: will consist of forty multiple-choice objective questions all of which are to be answered in 1 hour for 40 marks. will consist of five essay questions. Candidates will be required to answer any four in 1½ hours for 60 marks. will be a practical test of 2 hour duration. It will consist of two compulsory questions for 100 marks. A list of materials shall be made available to the schools not less than two weeks before the paper is taken for material procurement and relevant preparation. Candidates will be expected to report at the examination venue to carry out the task in the presence of the examiner. ALTERNATIVE TO PRACTICAL TEST The Council may consider testing candidates ability in practical work as prescribed in the syllabus in the event that materials for the actual practical test cannot be acquired. For this alternative test, there will be two compulsory sets of written questions to be answered in 2 hours for 100 marks. SAMPLE QUESTIONS PAPER 1 (OBJECTIVE) 1. Which of the following is NOT a property of an ideal refrigerant? A. High specific heat B. Stability in complete cycle C. Large latent heat of vaporization D. High critical temperature
2 2. Wet bulb depression comes to zero when the air is fully A. saturated. B. wet. C. dry. D. vaporized. 3. Which of the following is NOT a component of a vapour compression refrigeration system? A. Compressor B. Evaporator C. Absorber D. Condenser 4. The heat transfer during an adiabatic process is A. reversible. B. irreversible. C. zero. D. normal. 5. The material used in the refrigeration drier to absorb the moisture is the A. calcium chloride. B. silica gel. C. calcium sulphate. D. sodium hydroxide. 6. Heat absorption in refrigeration system takes place in the A. condenser. B. control. C. compressor. D. evaporator.
3 7. A temperature of - 40ºF on the celcius scale is A. - O o C. B o C. C o C. D o C. 8. The commonly used refrigerant in a domestic refrigerator is A. R 717. B. R 764. C. R 600A. D. R 290A. 9. The expansion of the refrigerant in a domestic refrigerator takes place in the A. accumulator. B. drier. C. control. D. stainer. 10. Silica gel is used to absorb moisture from refrigerant in the A. compressor. B. condenser. C. drier. D. evaporator.
4 PAPER 2 (ESSAY) 1. (a) List three types of refrigerant controls that are commonly used in refrigeration and air conditioning systems. (i) Sketch a capillary tube control. (ii) State the application of the capillary tube control sketched in (i). State three sources of financing an air conditioning and refrigeration business costing 1.5 millon naira. 2. (a) State four advantages an individual will have over partnering with another person in a business of refrigeration and air conditioning. Sketch the vapour compression refrigeration system. label any three parts of the sketch in. 3. (a) State three properties of a refrigerant. List the cylinder colour code for each of the following: (i) R 134a; (ii) R 717; (iii) R 600wa.
5 PAPER 3 (PRACTICAL PROJECT) 1. Using the material provided below, construct an evaporator suitable for 1/8 hp refrigerator (a) (d) (e) (f) (g) (h) (i) ¼ copper piper (½ roll); aluminium flat plate 1200mm x 1000 mm x 16 mm; mallet; rivet gun; rivet pin; punch; bending spring; snip; steel. 2. Using appropriate tools and equipment produce the following joints by brazing T, V, B and K.
: REFRIGERATION & AIR CONDITIONING COURSE CODE : 6023 COURSE CATEGORY : A PERIODS/ WEEK : 6 PERIODS/ SEMESTER : 90 CREDIT : 6 TIME SCHEDULE
COURSE TITLE : REFRIGERATION & AIR CONDITIONING COURSE CODE : 6023 COURSE CATEGORY : A PERIODS/ WEEK : 6 PERIODS/ SEMESTER : 90 CREDIT : 6 TIME SCHEDULE MODULE TOPIC PERIODS 1 Introduction. Applications
Refrigeration System with a Capillary Tube and a Thermostat
Exercise 2-1 Refrigeration System with a Capillary Tube Part A: REFRIGERATION CIRCUIT OBJECTIVE When you have completed this part, a refrigeration circuit using a capillary tube as a metering device will
R07. Answer any FIVE Questions All Questions carry equal marks *****
Set No: 1 III B.Tech. II Semester Supplementary Examinations, April/May 2013 REFRIGERATION AND AIR CONDITIONING (Mechanical Engineering) Time: 3 Hours Max Marks: 80 Answer any FIVE Questions All Questions
Chapter 9. Refrigeration and Liquefaction
Chapter 9 Refrigeration and Liquefaction Refrigeration is best known for its use in the air conditioning of buildings and in the treatment, transportation, and preservation of foods and beverages. It also
Week 9. Refrigeration Cycles I. GENESYS Laboratory
Week 9. Refrigeration Cycles I Objectives 1. Introduce the concepts of refrigerators and heat pumps and the measure of their performance. 2. Analyze the ideal vapor-compression refrigeration cycle. 3.
AIM: TO STUDY THE PERFORMANCE OF THE DOMESTIC REFRIGERATION RIG.
AIM: TO STUDY THE PERFORMANCE OF THE DOMESTIC REFRIGERATION RIG. Page1 CONTENT: 1. Product Description 2. Product Specifications 3. Operating Procedure 4. Observation Table 5. Calculations 6. Result Page2
ME 410 MECHANICAL ENGINEERING SYSTEMS LABORATORY MASS & ENERGY BALANCES IN PSYCHROMETRIC PROCESSES EXPERIMENT 3
ME 410 MECHANICAL ENGINEERING SYSTEMS LABORATORY MASS & ENERGY BALANCES IN PSYCHROMETRIC PROCESSES EXPERIMENT 3 1. OBJECTIVE The objective of this experiment is to observe four basic psychrometric processes
R10. IV B.Tech I Semester Regular/Supplementary Examinations, Nov/Dec REFRIGERATION & AIR-CONDITIONING (Mechanical Engineering)
Set No. 1 IV B.Tech I Semester Regular/Supplementary Examinations, Nov/Dec - 2014 REFRIGERATION & AIR-CONDITIONING (Mechanical Engineering) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions
IV SEMESTER DIPLOMA EXAMINATION, JANUARY-2013 THERMODYNAMICS
AE401,ME401,DAE19,DME19 IV SEMESTER DIPLOMA EXAMINATION, JANUARY-2013 THERMODYNAMICS Time: 3 Hours Max. Marks: 75 GROUP A : Answer any three questions. (Question No. 1 is compulsory) Q.1 Write a short
3. (a) Explain the working of a rotary screw compressor. [10] (b) How the capacity control is achieved in refrigerant compressor?
![3. (a) Explain the working of a rotary screw compressor. [10] (b) How the capacity control is achieved in refrigerant compressor?](/thumbs/86/93619521.jpg "3. (a) Explain the working of a rotary screw compressor. [10] (b) How the capacity control is achieved in refrigerant compressor?")
Code No: RR410305 Set No. 1 IV B.Tech I Semester Regular Examinations, November 2006 REFRIGERATION & AIR CONDITIONING (Mechanical Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions All
TECHNICAL BULLETIN SELECTING A COMPRESSED AIR DRYER INTRODUCTION
TECHNICAL BULLETIN SELECTING A COMPRESSED AIR DRYER INTRODUCTION Having an understanding of why water forms in your compressed air piping system will help you in evaluating the type of air drying system
Refrigeration air dryer
Principle of refrigeration air dryer Pneumatic circuit (System diagram) Warm wet water is precooled by compressed air chilled and dehumidified by air balancer (A) (precooler). Precooled compressed air
Institute of Aeronautical Engineering (Autonomous) Dundigal, Hyderabad B.Tech (III II SEM) MECHANICAL ENGINEERING
Institute of Aeronautical Engineering (Autonomous) Dundigal, Hyderabad- 500 043 B.Tech (III II SEM) MECHANICAL ENGINEERING REFRIGERATION AND AIR CONDITIONING Prepared by, Dr. CH V K N S N Moorthy, Professor
SSC-JE STAFF SELECTION COMMISSION MECHANICAL ENGINEERING STUDY MATERIAL REFRIGERATION CYCLES REFRIGERATION CYCLES REFRIGERATION CYCLES
SSC-JE SAFF SELECION COMMISSION MECHANICAL ENGINEERING SUDY MAERIAL 2 Syllabus: hermal Engineering () Refrigeration cycles; Principle of a Refrigeration Subject wise paper analysis: Mechanical Engineering
SAMPLE STUDY MATERIAL
R.A.C.-ME GAE, IES, PSU SAMPLE SUDY MAERIAL Mechanical Engineering ME Postal Correspondence Course Refrigeration & Air Conditioning GAE, IES & PSUs R.A.C.-ME GAE, IES, PSU 2 C O N E N. INRODUCION & BASIC
cussons Refrigeration Assembly Range TECHNOLOGY REFRIGERATION AND AIR CONDITIONING CUSSONS TECHNOLOGY LABORATORY RECOMMENDATION
REFRIGERATION AND AIR CONDITIONING CUSSONS LABORATORY RECOMMENDATION Cussons Refrigeration laboratories are offered to provide teaching to a range of different skill levels. In all the laboratories teaching
s. Properties for R134a are as follows : Saturated R-134a Superheated R-134a
CHAPTER 9 REFRIGERATION & AIR-CONDITIONING YEAR 2012 ONE MARK Common Data For Q. 1 and Q.2 A refrigerator operates between 120 kpa and 800 kpa in an ideal vapour compression cycle with R-134a as the refrigerant.
ME 410 MECHA ICAL E GI EERI G SYSTEMS LABORATORY
ME 410 MECHA ICAL E GI EERI G SYSTEMS LABORATORY MASS & E ERGY BALA CES I PSYCHROMETRIC PROCESSES EXPERIME T 3 1. OBJECTIVE The object of this experiment is to observe four basic psychrometric processes
Refrigeration Technology in Building Services Engineering
Unit 70: Unit code: T/600/0459 QCF Level: 3 Credit value: 10 Guided learning hours: 60 Unit aim Refrigeration Technology in Building Services Engineering This unit develops an understanding of the principles,
we will examine only the vapour compression systems transfers to the Carnot cycle can serve as the initial model of the ideal refrigeration cycle.
Refrigeration Cycle Reading Problems 10-1 10-5, 10-7, 10-9 10-11, 10-14, 10-39 Definitions a refrigeration system removes thermal energy from a low-temperature region and transfers heat to a high-temperature
B. A. T. Basic Appliance Training
B. A. T. Basic Appliance Training BASIC REFRIGERATION presented by Phil Whitehead Program Objective The objective of this program is to give you some of the basic elements that are essential to understanding
The Saturation process
SOUTH METROPOLITAN TAFE WA The Saturation process Dennis Kenworthy 8/5/2016 A student study guide to measuring and interpreting the saturation process of refrigeration and air-conditioning equipment System
Desiccants & Driers. By Norm Christopherson
Desiccants & Driers By Norm Christopherson Filter-driers play a pivotal role in the operation of hvac systems. At the heart of the drier is the desiccant held in the drier s cylindrical metal container.
GENERAL INFORMATION. The candidate is allowed to bring the following items into the examination room:
GENERAL INFORMATION Introduction: This Syllabus is intended to assist candidates studying for the Second Class Refrigerator Plants (Standardized or Provincial) Certificate Examination. Application to Undertake
Refrigerator and Heat Pump Objectives
10 CHAPTER Refrigeration Cycles 10-1 Refrigerator and Heat Pump Objectives The objective of a refrigerator is to remove heat (Q L ) from the cold medium; the objective of a heat pump is to supply heat
Dhulapally, Secunderabad Subject: REFRIGERATION AND AIR CONDITIONING QUESTION BANK
St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad-500 014 Subject: REFRIGERATION AND AIR CONDITIONING Class : ECE III 1 Define Unit of refrigeration. 2 Define C.O.P. QUESTION BANK 3 What is the
Service Step by Step Trouble-Shooting Check-List
WARNING: Only Data Aire trained technician or experience technicians should be working on Data Aire Equipment. Protect yourself at all times and work safe. Date: Dates at the job site: From: to Job#: Serial#:
EXPANSION VALVES. See Red Dot Catalog Also. * 2 ton valves - all other valves are 1 1/2 ton (1) Includes M1 Adapter 71R8050 EX02280
EXPANSION VALVES See Red Dot Catalog Also PART NO. DESCRIPTION INLET OUTLET FITTING -- INTERNAL EQUALIZED 20359 INTERNAL EQUALIZED 38722 INTERNAL EQUALIZED FITTING -- EXTERNAL EQUALIZED 71R8050 EXTERNAL
INSTITUTE OF AERONAUTICAL ENGINEERING
1 P a g e INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad -00 043 MECHANICAL ENGINEERING QUESTION BANK Name : REFRIGERATION AND AIR CONDITIONING Code : A60334 Class : III B. Tech
Some of these procedures need to be performed to conform to requirements of the Clean Air Act.
Leak Detection, Recovery, Evacuation and Charging Four basic service procedures used to repair and maintain a mechanical refrigeration system are leak detection, evacuation, recovery, and refrigerant charging.
To Improve Cop of Domestic Refrigerator with the Help of Water Cooling Condenser
Vol. 4, Issue 3, March To Improve Cop of Domestic Refrigerator with the Help of Water Cooling Condenser Sukani Sunny 1, Savaj Jayesh 2, Cop Improver Group 3 Lecture of Mechanical Engineering Department,
UNIT-1 Q.1 Draw P-V and T-s diagram of Reversed Carnot cycle (2M-Apr./May-2009) Q.2 Define Ton of refrigeration and COP. (2M- Nov/Dec-2009)
UNIT-1 Q.1 Draw P-V and T-s diagram of Reversed Carnot cycle (2M-Apr./May-2009) Q.2 Define Ton of refrigeration and COP. (2M- Nov/Dec-2009) (2M-Apr./May-2011) Q.3 Differentiate between heat engine and
Refrigeration and Air Conditioning
Refrigeration and Air Conditioning 1. Pick up the wrong statement. A refrigerant should have (a) Tow specific heat of liquid (b) high boiling point (c) high latent heat of vaporisation (d) higher critical
Sporlan Valve Division Parker Hannifan/CIC Group
www.parker.com/cic Sporlan Valve Division Parker Hannifan/CIC Group Matt McGrath, SW Regional Sales Manager Bob Dolan, Sales Engineer - Atlanta www.parker.com/cic Why Discuss TEVs Today? Expansion Valves
MASS. MARITIME ACADEMY
MASS. MARITIME ACADEMY REFRIGERATION LAB OUTLINE Rev.3 Fall 2015 Table of Content Page Lab #1: Introduction to refrigeration system components, tools and procedures 1 Lab #2: Familiarization, operation,
PowerPoint Presentation by: Associated Technical Authors. Publisher The Goodheart-Willcox Company, Inc. Tinley Park, Illinois
Althouse Turnquist Bracciano PowerPoint Presentation by: Associated Technical Authors Publisher The Goodheart-Willcox Company, Inc. Tinley Park, Illinois Chapter 3 Explain the operation of a simple ice
SHRI RAMSWAROOP MEMORIAL COLLEGE OF ENGG. & MANAGEMENT
QUIZ TEST-1 Time: 1 Hour REFREGERATION AND AIRCONDITIONING Max. Marks: 30 Q1) A refrigerator working on Bell-Coleman cycle (Reverse Brayton cycle) operates between 1 bar and 10 bar. Air is drawn from cold
Global Warming and the Hydrological Cycle
Global Warming and the Hydrological Cycle Climate Change Projections Wet regions will become wetter Dry regions will become drier Precipitation will occur less frequently Precipitation will be more intense
Refrigerator/Heat pump
UMEÅ UNIVERSITY 2013-12-16 Department of Physics Leif Hassmyr Updates versions Joakim Ekspong 2017-10-31 Refrigerator/Heat pump 1 Task 1. Understand the principle of a refrigerator/heat pump and know its
ESSAY: This will be a written paper of 6 essay questions. Candidates are to answer 5 questions in 2 hours for 60 marks.
260 PLUMBING AND PIPE FITTING Examination Structure The examination for this syllabus will cover three major areas of groupings with 193 Building Engineering and 191 General Metal Work as trade-related
Presentation on HVAC: Heating Ventilation Air Conditioning
Presentation on HVAC: Heating Ventilation Air Conditioning CHITKARA UNIVERSITY CHITKARA SCHOOL OF MECHANICAL ENGINEERING ;HARVINDER SINGH HVAC Heating, Ventilation and Air Conditioning Provides comfort
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road AUTONOMOUS QUESTION BANK (DESCRIPTIVE) UNIT I
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 AUTONOMOUS QUESTION BANK (DESCRIPTIVE) Subject with Code : Refrigeration and Air Conditioning (16ME8806) Course & Branch:
Paper No. : 04 Paper Title : Unit Operations in Food processing Module 11 : Principles of Refrigeration
Paper No. : 04 Paper Title : Unit Operations in Food processing Module 11 : Principles of Refrigeration 11.1 Introduction Preservation of foods is a vital processing step in food processing. There are
SXY MAINTENANCE SECTION M-1
SXY MAINTENANCE SECTION M-1 MAINTENANCE The following section is a basic guide for general maintenance and servicing of the vendor. This section is divided into three parts: (I) Preventative Maintenance,
Short Questions with Answers APPLIED THERMODYNAMICS(5 TH MECHANICAL) Chapter No-1
Short Questions with Answers APPLIED THERMODYNAMICS(5 TH MECHANICAL) Chapter No-1 1. Define mechanical efficiency in case of an IC engine? [2015w] Ans. Mechanical efficiency of an I.C. engine is defined
The Essentials Of Working With R-410A
The Essentials Of Working With R-410A By Norm Christopherson Several major manufacturers are producing comfort air conditioning equipment using refrigerant 410A. The trend towards the use of 410A continues
AIR CONDITIONING. Carrier Corporation 2002 Cat. No
AIR CONDITIONING Carrier Corporation 2002 Cat. No. 020-016 1. This refresher course covers topics contained in the AIR CONDITIONING specialty section of the North American Technician Excellence (NATE)
REGISTRATION EXAMINATION, NOVEMBER 2017 TRADESMAN PLUMBER QUESTION AND ANSWER BOOKLET. Time allowed THREE hours
Affix label with Candidate Code Number here. If no label, enter candidate Number if known No. 99 REGISTRATION EXAMINATION, NOVEMBER 07 TRADESMAN PLUMBER INSTRUCTIONS QUESTION AND ANSWER BOOKLET Time allowed
Refrigeration Basics from a Brewery Perspective
Refrigeration Basics from a Brewery Perspective By Jim VanderGiessen Jr, Pro Refrigeration Inc. By studying and understanding the basic principles of refrigeration, you will be able to understand any type
SECTION 7 AIR CONDITIONING (COOLING) UNIT 41 TROUBLESHOOTING
SECTION 7 AIR CONDITIONING (COOLING) UNIT 41 TROUBLESHOOTING UNIT OBJECTIVES After studying this unit, the reader should be able to Select the correct instruments for checking an air conditioning unit
Carnot. 2. (a) Discuss the advantages of the dense air refrigeration system over an open air refrigeration system?
UNIT-1 1. What is the difference between a refrigerator and heat pump? Derive an expression for the cop for both if they are running on reversed Carnot cycle? The above figure shows the objectives of refrigerators
Instructors: Contact information. Don Reynolds Doug McGee Factory Tech Support
Contact information Instructors: Don Reynolds 616-560-9903 Doug McGee 517-294-3932 Factory Tech Support 888-593-9988 Product Improvements for 2017 Todays Objectives Job Site Information Sheets Low Ambient
Thomas J Kelly. Fundamentals of Refrigeration. Sr. Engineering Instructor Carrier Corporation. August 20, Page number: 1.
Thomas J Kelly Sr. Engineering Instructor Carrier Corporation August 20, 2003 1 SESSION OBJECTIVES At the conclusion of this session you should be able to: 1. Describe the basics principles of refrigeration
LECTURE-18 Vapour Absorption Refrigeration System
Lecturer: -Dr. Esam Mejbil Abid Subject: Air Conditioning and Refrigeration Year: Fourth B.Sc. Babylon University College of Engineering Department of Mechanical Engineering LECTURE-18 Vapour Absorption
120 APPLIANCE MAINTENANCE
EXAMINATION STRUCTURE The trade consists of the following trade related courses: 191 General Metal Work (CME 11) 193 Building/Engineering Drawing (CTD 11, 12 & 13) 194 Basic Electricity (CEI 11) 120 APPLIANCE
Air Conditioning Components
Air Conditioning Components Agenda AC Components Compressor & Clutch Condenser Receiver-drier or Accumulator Expansion Valve or Orifice Tube Evaporator Compressor 2 primary purposes Increase pressure &
SECTION 2 SAFETY, TOOLS AND EQUIPMENT, SHOP PRACTICES UNIT 10 SYSTEM CHARGING
SECTION 2 SAFETY, TOOLS AND EQUIPMENT, SHOP PRACTICES UNIT 10 SYSTEM CHARGING UNIT OBJECTIVES After studying this unit, the reader should be able to Describe how refrigerant is charged into systems in
II. OBJECTIVE OF RESEARCH
Enhancement of Coefficient of Performance of Vapor Compression Refrigeration System Using Diffuser at let of Condenser Mr. Nurul Seraj 1, Dr. S. C. Roy 2 1 Student, 2 Head of Department, Department of
15. Heat Pipes in Electronics (1)
15.1 Components of a Heat Pipe The three basic components of a heat pipe are: 15. Heat Pipes in Electronics (1) 15.1.1 The Container The function of the container is to isolate the working fluid from the
4.1 Refrigeration process comparison
Refrigeration (Kylteknik) course # 424519.0 v. 2017 4. Refrigeration process comparison; process equipment Ron Zevenhoven Åbo Akademi University Thermal and Flow Engineering Laboratory / Värme- och strömningsteknik
MECHANICAL ENGINEERING ME.2017 FUNDAMENTAL OF REFRIGERATION AND AIR CONDITIONING. Sample Questions and Answers
MECHANICAL ENGINEERING ME.2017 FUNDAMENTAL OF REFRIGERATION AND AIR CONDITIONING Sample Questions and Answers CHAPTER 5 EVAPORATORS 1. What is Evaporator? Classify the various types of evaporator. Evaporator
RS-70 is suitable as a direct replacement for R-22 in low, medium and high temperatures in a great number of applications:
TECHNICAL DATA SHEET Features and uses of is a non-azeotropic blend of HFC with zero Ozone Depletion Potential et low Global Warming Potential (GWP), formulated to meet the requirements of the F-Gas Regulation
REFRIGERATION AND AIR CONDITIONING
REFRIGERATION AND AIR CONDITIONING SECOND EDITION S.N. Sapali Professor of Mechanical Engineering College of Engineering, Pune Delhi-110092 2014 REFRIGERATION AND AIR CONDITIONING, Second Edition S.N.
NABTEB Past Questions and Answers - Uploaded online
NATIONAL BUSINESS AND TECHNICAL EXAMINATIONS BOARD (NABTEB) REFRIGERATION AND AIR-CONDITIONING MAY/JUNE 2008 MODEL S AND S S 1) Explain with a well labeled drawing the mode of a vapour compression system.
SECTION 9 DOMESTIC APPLIANCES UNIT 47 ROOM AIR CONDITIONERS
SECTION 9 DOMESTIC APPLIANCES UNIT 47 ROOM AIR CONDITIONERS UNIT OBJECTIVES After studying this unit, the reader should be able to Explain various designs of window and through the wall units Explain the
Refrigeration Systems and Accessories
As with the Chapter Review Tests and the Final Exam, the tests your understanding of the materials underlying the learning objectives. After you ve reviewed your answers to the Chapter Review Tests, try
Installation Manual for. Series HWM and Non-ETI HYDRONIC WATER MODULE with SC and SD COMPRESSOR UNITS and R-410 REFRIGERANT
EarthLinked TXV Kit Installation Manual for Series HWM and Non-ETI HYDRONIC WATER MODULE with SC and SD COMPRESSOR UNITS and R-410 REFRIGERANT CONTENTS PAGE Pre-Installation 3 Hydronic Water Module Conversion
SECTION 5 COMMERCIAL REFRIGERATION UNIT 21 EVAPORATORS AND THE REFRIGERATION SYSTEM UNIT OBJECTIVES 3/22/2012 REFRIGERATION
SECTION 5 COMMERCIAL REFRIGERATION UNIT 21 EVAPORATORS AND THE REFRIGERATION SYSTEM UNIT OBJECTIVES After studying this unit, the reader should be able to Define high-, medium-, and low-temperature refrigeration.
PowerPoint Presentation by: Associated Technical Authors. Publisher The Goodheart-Willcox Company, Inc. Tinley Park, Illinois
Althouse Turnquist Bracciano PowerPoint Presentation by: Associated Technical Authors Publisher The Goodheart-Willcox Company, Inc. Tinley Park, Illinois Chapter 5 Explain the purpose and operation of
500 EX Fusion Compressor Series
500 EX Fusion Compressor Series R404A M/T R404A L/T Capacity RANGE 13.8kW - 20.4kW 7.7kW -11.2kW Copeland Fusion Semi-Hermetic Horizontal Scroll Compressors For Medium and Low Temperature Applications
1 /35 2 /35 3 /30 Total /100
Test is open book and notes. Answer all questions and sign honor code statement: I have neither given nor received unauthorized assistance during this exam. Signed Remember to show your work partial credit
LECTURE-17. Multi-Stage Vapour Compression Refrigeration. 1. Introduction
Lecturer: -Dr. Esam Mejbil Abid Subject: Air Conditioning and Refrigeration Year: Fourth B.Sc. Babylon University College of Engineering Department of Mechanical Engineering LECTURE-17 Multi-Stage Vapour
Design, Manufacturing of Chilled Water System for Process Cooling Application
IJSTE - International Journal of Science Technology & Engineering Volume 2 Issue 11 May 2016 ISSN (online): 2349-784X Design, Manufacturing of Chilled Water System for Process Cooling Application Prof.
Numerical Study on Improvement of COP of Vapour Compression Refrigeration System
Numerical Study on Improvement of COP of Vapour Compression Refrigeration System Sanath Kumar K H 1, Arun Kumara K S 2, Nissar Ahmed 3 Assistant Professor, Department of Mechanical Engineering, VVIT, Bangalore,
Pressure Enthalpy Charts
Pressure Enthalpy Charts What is a p-h Diagram? A p-h diagram is a diagram with a vertical axis of absolute pressure and a horizontal axis of specific enthalpy. "Enthalpy is the amount of energy in a substance
Thermodynamic Calculations of Two-Stage Vapor Compression Refrigeration Cycle with Flash Chamber and Separate Vapor Mixing Intercooler
Thermodynamic Calculations of Two-Stage Vapor Compression Refrigeration Cycle with Flash Chamber and Separate Vapor Mixing Intercooler Author: Volodymyr Voloshchuk Vl.volodya@gmail.com Introduction In
EXPERIMENTAL INVESTIGATION OF WATER COOLER SYSTEM BY USING ECO-FRIENDLY REFRIGERANT (R-134a)
EXPERIMENTAL INVESTIGATION OF WATER COOLER SYSTEM BY USING ECO-FRIENDLY REFRIGERANT (R-134a) Abstract- With the recent government regulations, of banning the ozone depleting substances and Kyoto protocol
High efficiency air to water Heat pumps LZT series
High efficiency air to water Heat pumps LZT series 01/2009 THE COMPANY HIDROS was born in 1993 as a trading company involved in the market of dehumidification and humidification of the air. Quite soon
COMPANY PROFILE 2016
COMPANY PROFILE 2016 Since its birth in 1991 RefComp brand has been distinguishing itself for its innovative ability initially for the piston, then for the screw. RefComp was the first Italian company
An Experimental Study on Clothes Drying Using Waste Heat from Split Type Air Conditioner
An Experimental Study on Clothes Drying Using Waste Heat from Split Type Air Conditioner P. Suntivarakorn, S. Satmarong, C. Benjapiyaporn, and S. Theerakulpisut Abstract This paper was to study the clothes
A/C-HEATER SYSTEM - MANUAL
A/C-HEATER SYSTEM - MANUAL 1986 Isuzu Trooper II 1986 A/C-HEATER SYSTEM Isuzu A/C-Heater Systems - Manual P UP, Trooper II * PLEASE READ THIS FIRST * CAUTION: When discharging air conditioning system,
Chapter 10. Refrigeration and Heat Pump Systems
Chapter 10 Refrigeration and Heat Pump Systems Learning Outcomes Demonstrate understanding of basic vaporcompression refrigeration and heat pump systems. Develop and analyze thermodynamic models of vapor-compression
PRESSURE-ENTHALPY CHARTS AND THEIR USE By: Dr. Ralph C. Downing E.I. du Pont de Nemours & Co., Inc. Freon Products Division
INTRODUCTION PRESSURE-ENTHALPY CHARTS AND THEIR USE The refrigerant in a refrigeration system, regardless of type, is present in two different states. It is present as liquid and as vapor (or gas). During
HVAC Fundamentals & Refrigeration Cycle
HVAC Fundamentals & Refrigeration Cycle Change of State of Water & the Refrigeration Cycle Change of State Water The Basic Refrigeration Cycle Types of DX Systems The Chilled water System The Cooling Tower
COOLING and DE-HUMIDIFICATION WITHOUT USING REFRIGERANTS
COOLING and DE-HUMIDIFICATION WITHOUT USING REFRIGERANTS THE DAWN OF A NEW ERA Political and ecological pressures over the past few years, have led to a change of emphasis in the design of fully air-conditioned
6. Within an internal combustion engine, the can-shaped component that moves up and down the cylinder
Student ID: 22133336 Exam: 986052RR - Heat When you have completed your exam and reviewed your answers, click Submit Exam. Answers will not be recorded until you hit Submit Exam. If you need to exit before
TEST REPORT #2. System Drop-in Test of L-40, L-41a and N-40b in Ice Machines
Air-Conditioning, Heating, and Refrigeration Institute (AHRI) Low-GWP Alternative Refrigerants Evaluation Program (Low-GWP AREP) TEST REPORT #2 System Drop-in Test of L-40, L-41a and N-40b in Ice Machines
Evaporative-Cooled vs. Air-Cooled Chillers: Kirtland AFB Case Study
www.amec.com Evaporative-Cooled vs. Air-Cooled Chillers: Kirtland AFB Case Study DISCUSSION TOPICS Brief Overview of Air-Cooled and Evaporative-Cooled Condenser Technologies Pros and Cons Scope and Results
Due to its low temperature glide about 1.5 approx. (75% less than R-407C and R-427A), it is suitable for a wide range of applications.
TECHNICAL DATA SHEET R434A () Features and uses of R-434A () is a non-flammable HFC mixture. ODP = 0, compatible with traditional mineral lubricants, alkyl benzene and also with synthetic POE, so there
PLEASE READ AND FOLLOW THESE INSTRUCTIONS
ME 300 Final Examination May 2, 2005 161 ME or 261 ME Name: Thermo No. Section: (Please circle) 8:30 a.m. 11:30 a.m. 2:30 p.m. PLEASE READ AND FOLLOW THESE INSTRUCTIONS 1. Put your name on each page of
Class 1: Basic Refrigera0on Cycle. October 7 & 9, 2014
Class 1: Basic Refrigera0on Cycle October 7 & 9, 2014 Refrigeration Cycle 4 key components needed in a basic refrigera0on cycle: 1. Compressor 2. Condenser 3. Evaporator 4. Metering Device Compressor Compressor
Solar Assisted Heat Pump
Solar Assisted Heat Pump Certificate Number MCS HP 0234/01 SOLAR ASSISTED HEATPUMP Unique We are pleased to be selling the first MCS approved domestic hot water product to retro-fit all existing cylinders,
Experiment 2: Test on Domestic Refrigerator for evaluation of EER.
Experiment 2: Test on Domestic Refrigerator for evaluation of EER. Specifications of Domestic Refrigerator: Model: Videocon refrigerator (single door) Capacity: 150 lit. Compressor: Hermetically Sealed
Section 1: Theory of Heat Unit 3: Refrigeration and Refrigerants
Section 1: Theory of Heat Unit 3: Refrigeration and Refrigerants Unit Objectives After studying this chapter, you should be able to: Discuss applications for high-, medium-, and low temperature refrigeration.
Chapter-8 Capacity Control of Refrigeration Systems
Chapter-8 Capacity Control of Refrigeration Systems Chapter-8 Capacity Control of Refrigeration Systems ၈.၁ Compressor Control Chiller Control and Chilled Water Plant Control Refrigeration system control
PERFORMANCE OF VCRS SYSTEM WITH HEAT EXCHANGER AND PHASE CHANGE MATERIAL
PERFORMANCE OF VCRS SYSTEM WITH HEAT EXCHANGER AND PHASE CHANGE MATERIAL K.Thejeswarudu 1, R. Meenakshi Reddy 2 and E. Siva Reddy 2 1 PG Student, Department of Mechanical Engineering, G. Pulla Reddy College
Adsorption Chillers Energysmart Green Cooling
Adsorption Chillers Energysmart Green Cooling New Partners in innovation Leaders in Dehumidification... Worldwide Power Partner Inc USA www.bryair.com Recover Low Grade Process Waste Heat For Energy Smart
To accomplish this, the refrigerant fi tis pumped throughh aclosed looped pipe system.
Basics Refrigeration is the removal of heat from a material or space, so that it s temperature is lower than that of it s surroundings. When refrigerant absorbs the unwanted heat, this raises the refrigerant
Air Conditioning Operation and Troubleshooting Matt Dunham
Air Conditioning Operation and Troubleshooting Matt Dunham Major Components (10 Minutes) Compressor heart of the system, causes refrigerant to flow by increasing the pressure of the refrigerant Metering
CHAPTER 1 INTRODUCTION
1 CHAPTER 1 INTRODUCTION 1.1 Background The science which deals with creating a controlled climate in indoor space is called air conditioning. Earlier days the air-conditioning was treated as a luxury,