Small Room Heat Recovery Ventilation

Transcription

1 Small Room Heat Recovery Ventilation Ideal for smaller spaces that would benefit from heat recovery, such as staff rooms or offices Version 3.1

2 2

3 Breathing Buildings Small Room Heat Recovery 3 Small Room Heat Recovery With the ability to achieve up to 81% heat recovery, this Mechanical Ventilation with Heat Recovery (MVHR) unit provides pre-heated fresh filtered air into the room. MVHR is ideal for use in low-energy buildings which have low internal heat gains relative to the ventilation requirements, and provides energy saving ventilation through the recovery of heat that would otherwise have been lost. A heat exchanger transfers the heat from the stale extracted air into the fresh incoming air ensuring the room has a constant flow of clean, warm air. Indoor air quality is improved, and as a result concentration levels are increased. Product Information Features Manufactured in the UK Up to 81% heat recovery Programmable Summer bypass to avoid adding to overheating problems Digital controller for simple and accurate commissioning External condensate connection Can be used with optional accessories such as CO 2 sensors Volt-free inputs Self diagnosis for simplified fault finding Adjustable delay On/delay Off timer Acoustically lined - low noise levels from only 3m Product Description A heat recovery system with up to 81% heat exchange efficiency. The easily accessible heat recovery cube is protected by two removable G3 filters. Two energy saving EC/DC fans ensure long life and low energy use. Fully insulated construction with built-in condensation drain Each model has three fully adjustable speeds and a purge setting. Supplied with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range Control Options Summer Bypass When the external temperature is below the internal temperature and the internal temperature is too high an internal damper operates. This allows the cooler outside air to help cool the room and alleviates overheating in the building. The fans will run on Normal speed with the bypass open until the internal room temperature falls below the maximum desired indoor temperature. The unit has an Evening Purge mode which means the fans run on Boost speed until the internal temperature falls below the set Indoor temperature. If the internal temperature is still above the set Indoor temperature after 5 hours, the unit will switch down to normal speed for the remainder of the Bypass Open period. The Night-time Purge mode works as the Evening Purge, except the unit will continue on Boost speed until the internal air temperature reaches the Outdoor temperature set point (Default 14 C). This mode provides pre-cooling of the building for the following day. Integral Humidity Sensor An integral humidity sensor will react to changes in humidity levels in the room. It will increase the speed of the unit in proportion to the change in the relative humidity level - ensuring continuous management of humidity levels. Even if the set trigger point is not reached, the sensor will react to sharp increases in humidity, meaning adequate ventilation is provided for even the smallest room. The sensor allows for increases in relative humidity as temperature drops overnight so as to avoid unnecessary ventilation during the night.

4 4 Small Room Heat Recovery The MVHR system has a range of control options including Humidistat, light switch and purge modes. A summer bypass mode helps to alleviate overheating in the Summer months. Humidity Sensor Features Overview: Ambient Response: Raises the humidity trigger point as internal temperature reduces Rapid Response: Monitors the rate of change in humidity and triggers increased airflow even if the humidity trigger threshold is not reached Proportional Response: Incrementally increases the fan speed to reduce sudden increases in noise and reduce energy consumption Multiple Control Options Five Volt-free pairs of switch terminals for sensor inputs allow boosting from a full range of controllers such as humidistats, PIR and timers. Two terminals with 24V outputs allow 0V to 10V proportional control by sophisticated controllers such as CO 2 sensors and proportional humidistats. The unit features switched live for boosting via light switches ( V AC) or manual Normal/Boost switches. This connection has the advantage of a Delay- On and Delay-Off facility. Delay-On enables you to prevent the Boost airflow between 0 and 10 minutes after a light switch has been activated. Delay-Off allows the Boost airflow to continue after a light switch is turned off to ensure effective clearance of air. This timer is adjustable between 0 and 25 minutes. Frost Protection In colder areas there is a possibility of frost building up on the intake side of the heat exchanger. In order to prevent damage, the MVHR unit reduces supply flow while maintaining extract flow at temperatures down to -20 C. Standard Controls All units have the following functions integrally mounted, pre-wired and factory fitted: Infinitely variable fan speed control on supply and extract Min/max ventilation control/set point Heating interlocks 0-10V Proportional speed adjustment Volt free contacts 24V Sensor supply On/off or trickle boost function from remote switch, e.g. PIR occupancy detector Fully automatic summer bypass Switched live input with adjustable Delay-On feature Fan failure or component failure indicated via individual fault code display Running time counter Control panel PIN number lock Automatic frost protection effective to -20 C Construction Overview Unit Specification The MVHR33 model is manufactured with a high density EPP case and has a high efficiency polymer heat exchanger. The MVHR60/75 models have a galvanized steel outer case construction and high efficiency aluminium heat exchanger. All units have supply and extract filters, automatic summer bypass, integral minimum and maximum infinitely variable

5 Breathing Buildings Small Room Heat Recovery 5 speed controls with failure indication via a wired remote controller. Low energy, high efficiency EC/DC fan/motor assemblies have sealed for life bearings and the impellers are high efficiency backward curved centrifugal. The heat exchanger cell has a thermal efficiency of up to 81% when tested to EN 308, protected by G3 grade synthetic filters on supply and extract. The unit comes complete with a condensate drip tray and drain connection. There is a removable access panel allowing full maintenance access from below. The removable panel provides access to the following: Supply or extract fan Supply and extract filter Heat exchanger Access to the electrical connections

6 6 Small Room Heat Recovery Continued MVHR 33, 60 & 75 Dimensions (mm) MVHR33 A B E D F J I C G K H SIDE BACK FRONT MVHR60* & 75* A B E D F J I G K H C SIDE BACK FRONT Model A B C D E F G H I J K kg Spigots Ø MVHR x60 MVHR MVHR *Galvanized steel outer case construction Accessories Model Flex connection Duct heater (electric) Attenuator (900mm) MVHR33 FLEX204 N/A ATT204 MVHR60 FLEX125 HTR125 ATT125 MVHR75 FLEX150 HTR150 ATT150 Model Duct transformation piece In-room temperature & CO 2 sensor MVHR33 DTP PIR MVHR60 N/A 0101 PIR MVHR75 N/A 0101 PIR PIR

7 Breathing Buildings Small Room Heat Recovery 7 MVHR33 Performance Fan speeds are fully adjustable within the performance range Static Pressure (Pa) % 40% 60% 100% Volume (l/s) Volume (m 3 /hr) Sound Data Speed Test mode k 2k 4k 8k db(a) at 3m Breakout % Supply Extract Breakout % Supply Extract Breakout % Supply Extract Breakout % Supply Extract

8 8 Small Room Heat Recovery Continued MVHR60 Performance Fan speeds are fully adjustable within the performance range Static Pressure (Pa) % 100% % 40% 0 Volume (l/s) Volume (m 3 /hr) Sound Data Flow % Test mode k 2k 4k 8k db(a) at 3m Supply Extract Breakout Supply Extract Breakout Supply Extract Breakout Supply Extract Breakout Tested according to BS 848. Breakout quoted spherical. Supply and extract quoted hemispherical.

9 Breathing Buildings Small Room Heat Recovery 9 MVHR75 Performance Fan speeds are fully adjustable within the performance range Static Pressure (Pa) % 100% % 40% 0 Volume (l/s) Volume (m 3 /hr) Sound Data Flow l/s Flow % Test mode k 2k 4k 8k db(a) at 3m Supply Extract Breakout Supply Extract Breakout Supply Extract Breakout Supply Extract Breakout Tested according to BS848. Breakout quoted spherical. Supply and Extract quoted hemispherical.

10 Contact us: w: e: t: f: a: 15 Sturton Street Cambridge CB1 2SN skype:

11 Contact us: w: e: t: f: a: 15 Sturton Street Cambridge CB1 2SN skype: