Our. Heaters. for your Projects

Size: px
Start display at page:

Download "Our. Heaters. for your Projects"

Transcription

1 P RO D U C T I N FO C U S Our Heaters for your Projects H E at t r a c i n G s Y s t E M s H E at E r s s U r Fa c E H E at i n G s Y s t E M s boilers

2 2 Electric Heaters Electric heaters are used for direct (rarely) indirect heating or temperature maintenance (compensation of heat losses), vaporization and melting of solid, liquid and gaseous media. The System at a Glance For the worldwide use of our products and services we are fulfilling the high quality demands and expectations of our customers from design up to commissioning. Not only to keep these demands but to develop them continuously to the benefit of our customers. This is reached by our integrated management system and the clearly defined company. Each of our employees is involved in the management system and is responsible for the quality of our products and services. Quality right from the Start The specialists for electric heating systems

3 H E ate rs 3 ElE ctric HE ate rs Our scope of supply it passes from heating inserts up to the complete unit for the installation in the ex-threatened area. All our electrical heating systems are tailored to your needs. These include complementary components like condensate, collective container and balance container, water treatment, pump as well as armatures belong to it. The power supply is steered by a switch arrangement and control. Our Management system IECEx Quality Assessment Report Quality Management System according to DIN EN ISO 9001 Safety Management according to SCC**-Catalogue Ex-Directive 94/9/EC (ATEX) Pressure Equipment Directive according to DgRI 97/23/EC AD 2000 HP0 ASME U-Stamp

4 4 application The Application Range for heating inserts and heaters include among others the chemical, petrochemical, pharmaceutical, steel, textile, cellulose, oil and gas industries as well as power stations and refineries. The Erection can take place both, in non-explosive and explosion-endangered areas of zones 1 and 2 in the presence of gases and vapors of groups IIa, IIB and IIc. For use in explosion-endangered areas, the standard heating insert is delivered with a connection box in flameproof enclosure, design Ex d, if required, with additional connection boxes increased safety Ex e or Ex i intrinsically safty, including Ec type examination certificate/ec declaration of conformity certificate, thereby the electrical part is separated from the instrumentation part. To keep the temperature class defined by the operator for the place operation by cooling sections and additional thermal protection measures are part of our design and have to be verified at site. The Design for an electric heater depends on the temperature required, the pressure and the connection power. The material is selected according to the medium to be heated, the temperature and pressure. materials such as carbon steel, stainless and heat resistant steels, nickel-based alloys, titanium and other surface-coated special materials are used. The limits of application need to be verified in each individual case. The following operating and design conditions have already been proved to be feasible: > temperatures up to 650 C, with special constructions up to 850 C > pressures up to 250 bar > power inputs of up to kw can be reached in one unit so far, however not presenting our maximum power limit > connection voltages up to 690 V, in special cases up to 1200 V The specialists for electric heating systems

5 H E ate rs 5 a pplicatio n c O nstru ctio n construction An electric heater is comparable with a conventional tube bundle heat exchanger and consists of the following components: > cylindrical shell (flow pipe) with nozzles for medium inlet and outlet and, as required, with nozzles for drain, ventilation, safety valve etc. > heating insert (tube bundle) with electric heating elements (the medium inside the pipe is replaced by electric energy) > girth flange for fixing the heating insert > temperature sensor (limiter) for measuring the heating surface temperature > temperature sensor (controller) for measuring the medium temperature > supports for horizontal or vertical erection > wiring room (pre-chamber) of heating insert > connection box for temperature sensors The medium is heated during the flow. The flow is directed in one or several ways, transversely or longitudinally, depending on the medium and the operating conditions. The maximum temperature permitted on the heating surface (specified by the medium to be heated and the material selection) and the pressure loss permitted need to be taken into consideration. The temperature of heating surface is monitored by at least two temperature sensors (thermocouple, PT100, thermostat), functioning as limiters. as soon as the temperature permitted is reached, the total power of the heater is switched off. A restart can only be effected after having clarified the reason for cut-off.

6 6 construction Different types of heating elements are used for the transmission of heat, such as hairpin heating elements and ceramic heating elements. Hairpin heating elements The standard hairpin heating elements consist of a metal jacket pipe with a diameter of 8.5 to 16 mm, bended U-shaped. The heating wire is located in the centre of the pipe, embedded in highly compressed magnesium oxide. This guarantees an excellent isolation resistance and a perfect heat conductivity between heating conductor and jacket pipe. The elements are installed into the tube sheet of heating insert by brazing, welding or screw connections. The hairpin heating elements are mainly used for heating up gases and liquids. Ceramic Heating Elements mainly consist of ceramic parts, pushed and fixed onto a guide rod and the heating spiral. The ceramic heating elements are pushed into a metallic heating cartridge tube. The cartridge tube is sealed to avoid direct medium contact and welded pressure-tightly into the tube sheet. The elements can be exchanged without interrupting operation. They are predominantly used for heating fuel oils, thermal oils or other highly viscose fluids. The specialists for electric heating systems

7 H E ate rs 7 constru ctio n DEsiG n Design The installed power depends on the process requirements. also several operating conditions can be realized with one electric heater. The thermal design of electric heater needs to be calculated in such a way that the medium can absorb the energy supplied without exceeding the temperature permitted on the heating surface. The know how is based on the capability to distribute the power over a surface in a technically and economically optimum solution. Concentrating the power over a small surface produces a high watt density (W/cm ) and thus a higher temperature on the heating surface. In the most unfavorable case this might lead to a damage of medium or damage of heating elements. In comparison, a conventional heat exchanger needs to have sufficient exchange surface available to be able to supply the energy to the medium to be heated. The mechanical design of components under pressure is calculated in accordance with harmonized norms such as Pressure Equipment Directive En 13445, En 12993, on request, by using the respective calculation rules in the country of installation or other international standards e.g. asme including all necessary tests, certificates and inspections. additionally required conditions such as consideration of nozzle loads by connected pipelines, supports and wind loads and seismic safety also belong to the design standard.

8 8 switch and control cabinets Regulation, Control For all electric heaters, we design and delivery switchboard and control panels for erection in distribution stations or outdoor, here also in hazardous areas. The power is controlled by a signal of 4-20 ma, provided by the customer, either via several heating stages or infinitely variable via thyristor controller. The latter normally disposes of an undercurrent control and/or a 4-20 ma signal for external power indication and are operated in two or three phases in full-wave mode. Before delivery, a general function test is performed, a full current test is feasible as well. The specialists for electric heating systems

9 H E ate rs 9 s witch and control c abinets KOnstrUKtiO r EFErEncEns practice examples The below-mentioned major projects only present a small selection of all our projects realized. Please contact us if you require additional information. 2x2 Gas heaters The double deck gas heaters were design to heat up big gas amounts, in a refinery in the explosion-threatened area. Because of the high pressure and temperature the challenge was to distribute the achievement on the surface which proves the optimum solution technically and economically. Technical Characteristics: > heating capacity 4x = 850KW 3400KW > maximum temperature: 450 c > Design pressure: bar > Supply voltage: max. 690 V / ac Manufacturing Standard > PED 97/23 / Ec > asme VIII Div 1- The range of application: > heating of gas in the hazardous area The functional principle Continuous heating of the medium by heat exchange between pipe and radiator medium. Our know-how is in the heat exchange area and optimally adapted to the individual operating conditions adapt to Ensure that the process temperature reaches is permissible without heating surface or the permissible pressure drop is exceeded.

10 10 Hot water boiler type series HWE The hot water boiler are suited as consumers for mains stabilisation, as autonomous calorifiers without local emission sources, and as a means to secure the district heating supply. your advantage: The hot water boiler can be directly integrated into the district heating mains. The area of application comprises all control range products: Secondary control range (SRl), minute reserve (mrl). Technical Characteristics: > Power range: 1 to 5 mw > Electrical connection: 690 V/50 hz/3 ph > calculation pressure: up to 30 bar > calculation temperature: up to 230 c Manufacturing Standards: > Pressure Equipment Directive (PED) 97/23/Ec > En / En / ad-2000 Your advantages: > Stepless power control at high power levels in combination / Infinitely > Boiler produces directly hot water > Large heat transfer area, smallest wing loading > no special requirements for water quality > Direct connection to the district heating network > no heat exchanger required > Supervision-free operation: according to En12953 (TRD 604) available (72 hours control interval) (BoB 72) > high redundancy by up to 250 single heating elements > Sturdy and maintenance-free design The specialists for electric heating systems

11 Heaters 11 REFERENCES SERVICE Take us for granted. Gladly at any Time. Apart from careful planning and manufacturing, a professional installation is essential for the proper function of a heating system. Our skilled and qualified assembly team offers you this service. Our employees install, test and put our heating systems including respective control units into operation. The quality of our work is guaranteed by regular training measures and the application of our management system and the SCC** catalogue (safety, health and environment). A continuous maintenance of our heating systems and a detailed technical documentation complete our service package. SERVICE PROMISES

12 KTPR02.En KLÖPPER-THERM GmbH & Co. KG Unterste-Wilms-Straße Dortmund Germany P.O. Box Dortmund Germany / I / sales@kloepper-therm.de The specialists for electric heating systems

Explosion-proof Immersion Heater Type D-8660

Explosion-proof Immersion Heater Type D-8660 Explosion-proof Immersion Heater Type D-8660 Sinus Jevi has developed explosionproof Ex de heating equipment, for hazardous area. The flame-proof (d) enclosures have been designed for non save areas to

More information

ELECTRICAL HEAT EXCHANGER FOR PROCESS INDUSTRY

ELECTRICAL HEAT EXCHANGER FOR PROCESS INDUSTRY ELECTRICAL HEAT EXCHANGER FOR PROCESS INDUSTRY ELECTRICAL HEAT EXCHANGER FOR PROCESS INDUSTRY Gas/Oil/Water Separation Hazardous area Immersion Crude oil Air treatment Steam generators Comfort Storage

More information

ELECTRICAL HEAT EXCHANGER FOR PROCESS INDUSTRY

ELECTRICAL HEAT EXCHANGER FOR PROCESS INDUSTRY ELECTRICAL HEAT EXCHANGER FOR PROCESS INDUSTRY ELECTRICAL HEAT EXCHANGER FOR PROCESS INDUSTRY Gas/Oil/Water Separation Hazardous area Immersion Crude oil Air treatment Steam generators Comfort Storage

More information

Industrial Cast-in Circulation Heaters for ATEX/IECEx hazardous areas or in non-atex version

Industrial Cast-in Circulation Heaters for ATEX/IECEx hazardous areas or in non-atex version heating for a better future Industrial Cast-in Circulation Heaters for ATEX/IECEx hazardous areas or in non-atex version HEATING GASES HEATING LIQUIDS The CETAL-developed Cast-In Circulation Heater Technology

More information

Flange immersion heaters

Flange immersion heaters Flange immersion heaters for ATEX/IECEx hazardous areas or in non-atex version HEATING GASES HEATING LIQUIDS MAINTAINING A CONTINUOUS TEMPERATURE CETAL flange immersion heaters are designed and manufactured

More information

OPTIBAR DP 7060 Supplementary Instructions

OPTIBAR DP 7060 Supplementary Instructions OPTIBAR DP 7060 Supplementary Instructions Differential pressure transmitter Category ATEX II 1/2G, 2G Ex db ia IIC T6...T1 Ga/Gb, Gb IECEx Ex db ia IIC T6...T1 Ga/Gb, Gb Housing Aluminium: Single chamber,

More information

Operating instructions

Operating instructions Operating instructions (Translation of the original operating instructions) Type TEKA FILTERCUBE-MV TEKA Absaug- und Entsorgungstechnologie GmbH Industriestraße 13 D-46342 Velen Postfach 1137 D-46334 Velen

More information

PESO. Temperature sensors with cables Thermocouples and RTD temperature probes ATEX I, e, t For use in areas with an explosion hazard

PESO. Temperature sensors with cables Thermocouples and RTD temperature probes ATEX I, e, t For use in areas with an explosion hazard Temperature sensors with cables Thermocouples and RTD temperature probes ATEX I, e, t For use in areas with an explosion hazard Persons concerned: Experienced professional electricians as per EU Directive

More information

HEAT. Industrial Ltd. Standard Products

HEAT. Industrial Ltd. Standard Products HEAT Industrial Ltd Standard Products EXHEAT Standard Products EXHEAT Industrial Division offers fast track solutions to industry's wide and varied requirements for electrical heating systems. All heaters

More information

Seat Ventilation offers an extensive range of ATEX certified products and is undertaking great efforts to extend this range even further.

Seat Ventilation offers an extensive range of ATEX certified products and is undertaking great efforts to extend this range even further. ATEX SOLUTIONS In order to apply a single level for health and safety requirements and to overcome barriers of trade within Europe, national regulations for explosion prevention were harmonized in 1975

More information

Circulation Heaters Selection Guidelines

Circulation Heaters Selection Guidelines Selection Guidelines Selecting a Circulation Heater Application Factors Corrosion Policy Selecting the proper circulation heater component requires critical engineering judgement and careful evaluation

More information

Industrielle Elektrowärme GmbH. OhmEx. Company Presentation. Dipl.-Ing. Wolfgang Vogler (GM)

Industrielle Elektrowärme GmbH. OhmEx. Company Presentation. Dipl.-Ing. Wolfgang Vogler (GM) Company Presentation Dipl.-Ing. Wolfgang Vogler (GM) 1 Main Competence is recognised as a professional and competitive company in design and manufacture of electric process heaters and assosiated thyristor

More information

Heat exchangers in Thermo Plate-design Type XPT. + variable + cleanable + efficient + safe FULLY WELDED

Heat exchangers in Thermo Plate-design Type XPT. + variable + cleanable + efficient + safe FULLY WELDED Heat exchangers in Thermo Plate-design Type XPT + variable + cleanable + efficient + safe FULLY WELDED The XPT for use in a wide range of applications + The pillow-shaped design of the Thermoplates permits

More information

L+T GASETECHNIK. Klöpper-Waldmann GmbH & Co. K G. Alarm unit LSG4

L+T GASETECHNIK. Klöpper-Waldmann GmbH & Co. K G. Alarm unit LSG4 Areas of application The LSG4 alarm unit is used for monitoring industrial systems, e.g. in the following areas: Alarm and hazard stati in production e.g. for monitoring temperature and pressure in reactors

More information

Heated tools. Semiconductor equipment

Heated tools. Semiconductor equipment Heated tools Semiconductor equipment Ceramic heating elements made of silicon nitride and aluminum nitride can be manufactured as tools in various shapes. The heating function can be integrated in complex

More information

Screw plug immersion heaters

Screw plug immersion heaters Screw plug HEATING GASES HEATING LIQUIDS MAINTAINING A CONTINUOUS TEMPERATURE The screw plug by CETAL are designed and manufactured as a standard range or according to customer specifications. Reliability

More information

Nuclear Electric Heating

Nuclear Electric Heating Nuclear Electric Heating Caloritech has exceeded the most demanding nuclear heating requirements for over 30 years. We design and manufacture products for nuclear applications in PWR, BWR and PHWR nuclear

More information

ATEX, NOMENCLATURE AND CODING

ATEX, NOMENCLATURE AND CODING Technical Notes ATEX, NOMENCLATURE AND CODING The intent of this technical note is approach to the user to the ATEX normative. For this we will begin defining, what is an explosive atmosphere, what are

More information

Agency Certifications, Recognition and Approvals

Agency Certifications, Recognition and Approvals Agency Certifications, Recognition and Approvals WATROD and FIREBAR Element and Assemblies...559 Agency Certifications, Recognition and Approvals 557 558 WATROD and FIREBAR Element and Assemblies Agency

More information

Regulated Ex-Heater HEX with internal controller, HEX with external controller II 3 G II 3 D

Regulated Ex-Heater HEX with internal controller, HEX with external controller II 3 G II 3 D Regulated Ex-Heater HEX5-1.08 with internal controller, HEX5-2.08 with external controller II 3 G II 3 D Instruction Manual Version 1.02.00 Dear customer, we have made up this operating manual in such

More information

Section 4. ThermalEx - Certified Hazardous Area Heaters

Section 4. ThermalEx - Certified Hazardous Area Heaters Section 4 ThermalEx - Certified Hazardous Area Heaters Page What is the IECEx Scheme? 4.1 What is the ATEX Directive? 4.1 ThermalEx Explosionproof Heaters 4.2 Applications and Options 4.3 ThermalEx End

More information

Flanged Immersion Heaters

Flanged Immersion Heaters Flanged Immersion Heaters Are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is

More information

IECEx Certificate of Conformity

IECEx Certificate of Conformity IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:

More information

Flanged Immersion Heaters

Flanged Immersion Heaters Flanged Immersion Heaters Are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is

More information

Immersion Heaters. Screw Plug Immersion Heater

Immersion Heaters. Screw Plug Immersion Heater Screw plug immersion heaters are ideal for direct immersion heating of liquids, including all types of oils and heat transfer solutions. Available in a variety of sizes, screw plug immersion heaters feature

More information

Flanged Immersion Heaters

Flanged Immersion Heaters Flanged Immersion Heaters Are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating

More information

Agency Certifications, Recognition and Approvals

Agency Certifications, Recognition and Approvals Agency Certifications, Recognition and Approvals WATROD and FIREBAR Element...563 Agency Certifications, Recognition and Approvals WATLOW 561 562 WATLOW WATROD and FIREBAR Element Agency Recognition UL

More information

Circulation Heaters Selection Guidelines

Circulation Heaters Selection Guidelines Selection Guidelines Selecting a Circulation Heater Application Factors Corrosion Policy Selecting the proper circulation heater component requires critical engineering judgement and careful evaluation

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is

More information

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series

Circulation Heaters. To order, call or shop online at omega.com SM. CHF Series CHF Series Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the is immediately

More information

Duct heaters for ATEX/IECEx hazardous areas or in non-atex version

Duct heaters for ATEX/IECEx hazardous areas or in non-atex version for ATEX/IECEx hazardous areas or in non-atex version * Non contractual picture Warning It is imperative to read these instructions carefully before installing or maintaining the equipment. MI200EN 09/2017

More information

ATEX, NOMENCLATURE AND CODING

ATEX, NOMENCLATURE AND CODING ATEX, NOMENCLATURE AND CODING The intent of this technical note is approach to the user to the ATEX normative. For this we will begin defining, what is an explosive atmosphere, what are ATEX, as well as

More information

THERMAL ELECTRIC ELEMENTS

THERMAL ELECTRIC ELEMENTS certified hazardous area heaters VERSION 1.1 THERMAL ELECTRIC ELEMENTS AUSTRALIA THE SPECIALISTS IN CUSTOM HEATING about tee Thermal Electric Elements was established in 1972 as a father and son operation

More information

Immersion heaters for ATEX/IECEx hazardous areas or in non-atex version

Immersion heaters for ATEX/IECEx hazardous areas or in non-atex version for ATEX/IECEx hazardous areas or in non-atex version * Non contractual picture Warning It is imperative to read these instructions carefully before installing or maintaining the equipment. MI100EN 09/2017

More information

Explosion-protected actuator Page 259 of 292

Explosion-protected actuator Page 259 of 292 Explosion-protected actuator Page 259 of 292 9.5 Explosion-protected actuator 9.5.1. What is an explosion? A flammable substance and oxygen, in a certain mixture, must be available to set off an explosion.

More information

OPTIBAR P 1010/2010 C Supplementary instructions

OPTIBAR P 1010/2010 C Supplementary instructions OPTIBAR P 1010/2010 C Supplementary instructions Pressure transmitter Equipment category II 1G / Ga, II 1D / Da in protection type intrinsic safety Exi KROHNE CONTENTS OPTIBAR P 1010/2010 C 1 Safety instructions

More information

GENERAL OVERVIEW ELECTRIC HEATERS - EXCHANGERS - PACKAGES ELECTRIC HEATING SOLUTIONS ELECTRIC HEATERS EXCHANGERS PACKAGES

GENERAL OVERVIEW ELECTRIC HEATERS - EXCHANGERS - PACKAGES ELECTRIC HEATING SOLUTIONS ELECTRIC HEATERS EXCHANGERS PACKAGES GENERAL OVERVIEW ELECTRIC HEATERS - EXCHANGERS - PACKAGES ELECTRIC HEATING SOLUTIONS ELECTRIC HEATERS EXCHANGERS PACKAGES COMPANY PROFILE Masterwatt is specialized in the production of electric heaters

More information

Pressure sensors. Ex ia I / IIC T6 acc. to ATEX. Features. Description. Measuring ranges. Applications

Pressure sensors. Ex ia I / IIC T6 acc. to ATEX. Features. Description. Measuring ranges. Applications Force Pressure Temperature Switch Pressure sensors Ex ia I / IIC T6 acc. to ATEX with internal diaphragm with front flush diaphragm Accuracy: 0,25% and 0,5 % Standard output: 4...20 ma; 2-wire system Description

More information

Quality Heat Exchangers

Quality Heat Exchangers Quality Heat Exchangers Brazed Plate Heat Exchangers Series TPL With partnership into the future FUNKE is a leader in the development and production of quality heat exchangers with a heat transfer area

More information

Intrinsically Safe Pressure Transmitters for installation in hazardous locations Models IS-20-S, IS-21-S, IS-20-F, IS-21-F WIKA Datasheet IS-20

Intrinsically Safe Pressure Transmitters for installation in hazardous locations Models IS-20-S, IS-21-S, IS-20-F, IS-21-F WIKA Datasheet IS-20 Electronic Pressure Measurement Intrinsically Safe Pressure Transmitters for installation in hazardous locations Models IS-20-S, IS-21-S, IS-20-F, IS-21-F WIKA Datasheet IS-20 Applications Chemical, Petrochemical

More information

Quality Heat Exchangers

Quality Heat Exchangers Quality Heat Exchangers Brazed Plate Heat Exchangers Universal solutions for industrial and domestic applications With partnership into the future FUNKE is a leader in the development and production of

More information

GENERAL SPECIFICATION ELECTRICAL

GENERAL SPECIFICATION ELECTRICAL GENERAL SPECIFICATION ELECTRICAL GS ELE 331 Tape trace heating 00 10/04 First issue Rev. Date Notes Contents 1. Scope...3 2. Reference documents...3 3. Environmental Conditions...4 4. Technical Requirements...5

More information

EUROPEAN DIRECTIVES Explosive atmospheres ATEX 2014/34/EU

EUROPEAN DIRECTIVES Explosive atmospheres ATEX 2014/34/EU EUROPEAN DIRECTIVES Explosive atmospheres ATEX 2014/34/EU GENERAL The accidental ignition of an atmosphere containing a large quantity of gas, vapour, mists and/or dust may cause an explosion. Specific

More information

Packaged Instantaneous Circulation Heater Full KW Selection In All Voltages, Single or Three Phase

Packaged Instantaneous Circulation Heater Full KW Selection In All Voltages, Single or Three Phase Features Heavy Duty Construction Constructed with high grade materials to ensure long operating life Turn-Key package is simple to specify and operate Factory wired electrical controls provide trouble-free

More information

September 2012 EGO Tubular Heating Elements - Technical Details page 1 of 12

September 2012 EGO Tubular Heating Elements - Technical Details page 1 of 12 EGO Tubular Heating Elements - Technical Details Table of contents 1) Structure of the Heating Element / types 2) Configuration of Tubular Heating Elements 3) Thermal fuse 4) Connections 5) Shape of the

More information

C D E F. Tubular Industrial Process Circulation Heaters. Circulation Heaters. View Product

C D E F. Tubular Industrial Process Circulation Heaters. Circulation Heaters. View Product Self-contained heating units designed for optimum operating efficiency and performance Providing trouble-free service and application flexibility! All of the heat generated by the elements is immediately

More information

The R. STAHL Technology Group Worldwide Success with Competence and Customer Support

The R. STAHL Technology Group Worldwide Success with Competence and Customer Support The R. STAHL Technology Group Worldwide Success with Competence and Customer Support The entrepreneurial basis of the R. STAHL Technology Group follows a long tradition. The product range is aimed at specialised

More information

Safety instructions VEGADIF DF65.GX*****H/Z/P/F***** IECEx BVS

Safety instructions VEGADIF DF65.GX*****H/Z/P/F***** IECEx BVS Safety instructions VEGADIF DF65.GX*****H/Z/P/F***** IECEx BVS 10.0008 Ex td A20, A20/21, A20/22, A21 IP66 T 0044 37675 Contents 1 Area of applicability 3 2 General information 3 2.1 Zone 20 instruments

More information

ELECTRIC HEATING. we get to the point... Gräff GmbH Bonner Strasse 54 D Troisdorf Tel: +49(0) Fax: +49(0) ISOMA

ELECTRIC HEATING. we get to the point... Gräff GmbH Bonner Strasse 54 D Troisdorf Tel: +49(0) Fax: +49(0) ISOMA ELECTRIC HEATING ELECTRIC HEATING ISOMA ~ we get to the point... Gräff GmbH Bonner Strasse 54 D - 53842 Troisdorf Tel: +49(0)2241-4907-0 Fax: +49(0)2241-4907-77 Internet: http://www.graeff-gmbh.com E-Mail:

More information

Technical Data. General specifications Switching element function Rated operating distance s n 4 mm

Technical Data. General specifications Switching element function Rated operating distance s n 4 mm 0102 Model Number Features 4 mm non-flush Accessories BF 12 Mounting flange, 12 mm Technical Data specifications Switching element function NAMUR, NO Rated operating distance s n 4 mm Installation non-flush

More information

Tubular Industrial Process

Tubular Industrial Process are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating type heaters, to a pipe. See

More information

INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS FOR 350 SERIES CIRCULATION HEATERS

INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS FOR 350 SERIES CIRCULATION HEATERS INDEECO Circulation Heaters are designed to provide years of trouble free operation if properly installed and maintained. Please read and follow these instructions for installing and maintaining the heater.

More information

Advanced heat transfer technology

Advanced heat transfer technology Advanced heat transfer technology Providing substantial energy savings through customized designs Thermo plate products for the process industry Thermo plate products for the process industry Unique transfer

More information

GTF 103-Ex. GREISINGER electronic GmbH D Regenstauf, Hans-Sachs-Straße 26. Temperature Probe for potentially explosive atmospheres

GTF 103-Ex. GREISINGER electronic GmbH D Regenstauf, Hans-Sachs-Straße 26. Temperature Probe for potentially explosive atmospheres Z31.0.XX.6C-11 Temperature Probe for potentially explosive atmospheres (Measuring ranges from -200 to +900 C) Operating Manual GTF 103-Ex 0081 GREISINGER electronic GmbH D - 93128 Regenstauf, Hans-Sachs-Straße

More information

Spiral heat exchangers

Spiral heat exchangers Spiral heat exchangers www.tranter.com, www.spiralheatexchangers.com Tranter HES GmbH Tranter HES originated from the acquisition of HES GmbH Heat Exchanger Systems GmbH early 2009. Tranter HES represents

More information

AM54. Armored Variable Area Flowmeter Series AM54331/32 Series AM54371/72/73/74 Series AM54431/32 Series AM54471/72/73/74

AM54. Armored Variable Area Flowmeter Series AM54331/32 Series AM54371/72/73/74 Series AM54431/32 Series AM54471/72/73/74 AM54 Instruction Bulletin North American Installation Addendum Document Number PN25016 Armored Variable Area Flowmeter Series AM54331/32 Series AM54371/72/73/74 Series AM54431/32 Series AM54471/72/73/74

More information

Manual Power relay SR853

Manual Power relay SR853 Manual Power relay SR853 Product types SR853.8.x.x, Rev. 1 SR853 manual page2 The symbols WARNING, CAUTION, NOTE This symbol warns of a serious hazard. Failure to observe this warning may result in death

More information

EXHEAT Industrial Standard Products

EXHEAT Industrial Standard Products Standard Products EXHEAT Industrial Standard Products EXHEAT Industrial offers fast track solutions to the industry s wide and varied requirements for electrical heating systems. All our heaters are manufactured

More information

Quality Heat Exchangers

Quality Heat Exchangers Quality Heat Exchangers Brazed Plate Heat Exchangers Universal solutions for industrial and domestic applications With partnership into the future FUNKE is a leader in the development and production of

More information

Safe area; Zone 1 and Zone 2

Safe area; Zone 1 and Zone 2 6 6/0 Instrumentation Systems 6 Instrumentation Equipment Technology Control cabinets and system components for all aspects of instrumentation for installation in the control room Field stations with I.S.

More information

Dual certification! Air handling units for potentially explosive atmospheres

Dual certification! Air handling units for potentially explosive atmospheres Dual certification! Air handling units for potentially explosive atmospheres X-CUBE Ex A certified safety product The air handling unit with dual ATEX certification ATEX directive 2014/34/EU applies to

More information

HEATING. Hazardous Area. custom engineered heating solutions

HEATING. Hazardous Area. custom engineered heating solutions HEATING Hazardous Area custom engineered heating solutions Hazardous Area Heating Hazardous Areas Many industries, ranging from off shore oil platforms, on site heavy fuel oil tank farms, food and beverage,

More information

Safety instructions VEGAPULS 64

Safety instructions VEGAPULS 64 Safety instructions Intrinsic safety "i" 4 20 ma/hart - two-wire Document ID: 53001 Contents 1 Area of applicability... 3 2 Important specification in the type code... 3 3 Different ignition protection

More information

Manual Isolating Barrier D461R1 (Revision 01)

Manual Isolating Barrier D461R1 (Revision 01) D461R1 Manual Isolating Barrier D461R1 (Revision 01) Product Manual Original Instructions valid for models D461R1.11 with 1x signal input into 1x isolated signal output D461R1.12 with 1x signal input into

More information

Documentation. Parallel Heating Cable. Type: ELP

Documentation. Parallel Heating Cable. Type: ELP Documentation Parallel Heating Cable Type: ELP 05.01.2018 K. Folkerts Content 1. Data sheet 2. Installation instructions 3. Declarations of conformity 05.01.2018 K. Folkerts 1 05.01.2018 K. Folkerts Constant

More information

Cast Line Heaters The Benefits of This Space Saving Electric Heater

Cast Line Heaters The Benefits of This Space Saving Electric Heater WHITE PAPER Cast Line Heaters The Benefits of This Space Saving Electric Heater Introduction Cast line heaters, or cast-in heaters, offer an alternative to the more common inline process heaters that have

More information

Operating Instructions for Rotor flow Indicator. Model: DKF

Operating Instructions for Rotor flow Indicator. Model: DKF Operating Instructions for Rotor flow Indicator Model: DKF 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Mechanical Connection... 4 5.1 Before installation...

More information

ASME Packaged Electric Water Heater

ASME Packaged Electric Water Heater MODEL SH & H ASME Packaged Electric Water Heater 15-1600 KW - All Voltages & Phases, 80-5000 Gallon Capacity Features Reliable Packaged System Only high grade materials used in construction to ensure long

More information

S&T HEAT EXCHANGERS Part II: Main Parts, Conical Transitions, Shell & Heads, Nozzle Design.

S&T HEAT EXCHANGERS Part II: Main Parts, Conical Transitions, Shell & Heads, Nozzle Design. S&T HEAT EXCHANGERS Part II: Main Parts, Conical Transitions, Shell & Heads, Nozzle Design. STUDY NOTES Instructor: Javier Tirenti training@arvengconsulting.com www.arvengconsulting.com Table of contents

More information

INSTALLATION AND OPERATION MANUAL

INSTALLATION AND OPERATION MANUAL INSTALLATION AND OPERATION MANUAL PRESSURISED STEEL BOILERS AR 30 AR 1000 RADIALAND - BOILER's INSTALLATION MANUAL version 1.0 / 15-02-2008 The company E. is outstanding in the field of central heating

More information

PIROWATT - High Power Cartridge Heaters -

PIROWATT - High Power Cartridge Heaters - PIROWATT - High Power Cartridge Heaters - Figure 1 GENERAL CHARACTERISTICS These heaters are characterised by a high specific power and a high reliability: These qualities are essential in the applications

More information

COMPACT FLAME CONTROLLER CFC 1000

COMPACT FLAME CONTROLLER CFC 1000 COMPACT FLAME CONTROLLER CFC 1000 TECHNICAL DESCRIPTION EDITION: TB CFC1000- REV.6 2012-03-07 Important: Please note, that all mounting and wiring as well as all changing or adjustment at the flame monitoring

More information

Annubar Flowmeter Series

Annubar Flowmeter Series Reference Manual Appendix B Approvals Annubar Flowmeter Series Hazardous Locations Installations.................. page B-1 Rosemount 3051SFA Product Certifications.......... page B-1 Rosemount 3095MFA

More information

GESTRA Steam Systems DK 45. English. Installation Instructions Steam Trap DK 45

GESTRA Steam Systems DK 45. English. Installation Instructions Steam Trap DK 45 GESTRA Steam Systems DK 45 EN English Installation Instructions 818676-00 Steam Trap DK 45 1 Contents Important Notes Page Usage for the intended purpose...4 Safety note...4 Danger...4 Attention...4 PED

More information

// Explosion Isolation. No matter what happens - nothing happens. /

// Explosion Isolation. No matter what happens - nothing happens. / . No matter what happens - nothing happens. / Valve VENTEX Slide Valve RSV Flap Valve REDEX Flap Slide Valve REDEX Slide Confidence through safety: RICO Sicherheitstechnik AG. / The RICO quality promise.

More information

Officine Meccaniche M.A.M. series for command, control, signaling and/or automation. DOCUMENT IS-EJB-A-14 rev. 0

Officine Meccaniche M.A.M. series for command, control, signaling and/or automation. DOCUMENT IS-EJB-A-14 rev. 0 Officine Meccaniche M.A.M. Apparecchiature Antideflagranti DOCUMENT IS-EJB-A-14 rev. 0 Instructions Flameproof enclosures EJB../W series for command, control, signaling and/or automation Emission date:

More information

IECEx Certificate of Conformity

IECEx Certificate of Conformity IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:

More information

RADAR LEVEL GAUGE SPECIAL SAFETY INSTRUCTION

RADAR LEVEL GAUGE SPECIAL SAFETY INSTRUCTION Special Safety Instruction en RADAR LEVEL GAUGE SPECIAL SAFETY INSTRUCTION Contents TankRadar Pro European ATEX Directive Information............................... 2 ATEX marking and Ex Certification

More information

Dräger X-am 5000 Multi-Gas Detection

Dräger X-am 5000 Multi-Gas Detection Dräger X-am 5000 Multi-Gas Detection The Dräger X-am 5000 belongs to a generation of gas detectors, developed especially for personal monitoring applications. This 1- to 5-gas detector reliably measures

More information

Erhitzer_engl_3:Wärmeträger :43 Uhr Seite 1. INTEC Engineering GmbH Thermal oil heaters

Erhitzer_engl_3:Wärmeträger :43 Uhr Seite 1. INTEC Engineering GmbH Thermal oil heaters Erhitzer_engl_3:Wärmeträger-2 18.05.2011 9:43 Uhr Seite 1 INTEC Engineering GmbH Thermal oil heaters Erhitzer_engl_3:Wärmeträger-2 18.05.2011 9:43 Uhr Seite 2 Thermal Oil Heaters Thermal oil heaters by

More information

HEAT TRANSFER STORAGE CALORIFIERS EC SERIES SC SERIES BT SERIES

HEAT TRANSFER STORAGE CALORIFIERS EC SERIES SC SERIES BT SERIES STORAGE CALORIFIERS EC SERIES SC SERIES BT SERIES INTRODUCTION The HRSFUNKE Storage Calorifiers offer a high quality solution for domestic hot water (DHW) heating. The standard range is manufactured from

More information

MULTICELL... for HIGH-TEMP TUBULAR HEATER TYPICAL CARTRIDGE HEATER WATLOW MULTICELL HEATER TYPICAL TUBULAR HEATER

MULTICELL... for HIGH-TEMP TUBULAR HEATER TYPICAL CARTRIDGE HEATER WATLOW MULTICELL HEATER TYPICAL TUBULAR HEATER MULTICELL.................... Heaters...... Unique Advantages.. for Demanding Operations Sheath Temperature MULTICELL Heaters: the High Temperature Choice 2050 F (1120 C) WATLOW MULTICELL HEATER 1800 F

More information

Combi Modular System. Standardised centrifugal pumps EN 733 ISO 2858 ISO 5199 API 610

Combi Modular System. Standardised centrifugal pumps EN 733 ISO 2858 ISO 5199 API 610 Combi Modular System Standardised centrifugal pumps EN 733 ISO 2858 ISO 5199 API 610 SPX FLOW Johnson Pump brand water, chemical and petrochemical standardised pumps represent a range of centrifugal pumps

More information

Mechanical Vacuum Systems for Secondary Metallurgy Steel Degassing

Mechanical Vacuum Systems for Secondary Metallurgy Steel Degassing Mechanical Vacuum Systems for Secondary Metallurgy Steel Degassing 173.13.02 Utmost Efficiency VD / VOD processes Vacuum Degassing (VD) for low alloy steels; Vacuum Oxygen Decarburising (VOD) for stainless

More information

Top performance when the going gets tough

Top performance when the going gets tough Top performance when the going gets tough The Alfa Laval DuroShell plate-and-shell heat exchanger Sub-headline coming soon DuroShell plate-and-shell made tougher Alfa Laval DuroShell is a specially engineered

More information

Sondex - A World of Heat Exchangers For All Applications

Sondex - A World of Heat Exchangers For All Applications Sondex - A World of Heat Exchangers For All Applications SONDEX HEAD OFFICE Sondex - A Leading Manufacturer of Plate Heat Exchangers Sondex A/S, a Danish company, was founded in 1984 by Mr. Aa. Søndergaard

More information

Heating Mats and Jackets. innovations in heat tracing

Heating Mats and Jackets. innovations in heat tracing Heating Mats and Jackets innovations in heat tracing The eltherm GmbH Solutions with electrical heat tracing systems eltherm GmbH is an international operating company specialising in the field of electrical

More information

MANUAL Oil Level Sensor

MANUAL Oil Level Sensor PROCESS AUTOMATION MANUAL Oil Level Sensor KVF-104-PF ISO9001 0102 With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery for Products

More information

Intrinsically safe acoustic emission equipment opens the door to permanent monitoring applications in the oil and gas industry

Intrinsically safe acoustic emission equipment opens the door to permanent monitoring applications in the oil and gas industry 18th World Conference on Nondestructive Testing, 16-20 April 2012, Durban, South Africa Intrinsically safe acoustic emission equipment opens the door to permanent monitoring applications in the oil and

More information

SCREW PLUG IMMERSION HEATERS

SCREW PLUG IMMERSION HEATERS SCREW PLUG IMMERSION HEATERS ELECTRIC PROCESS HEATER SOLUTIONS BEGIN HERE... Electric heaters are our only business. We are specialists in designing, engineering, and manufacturing both standard and custom

More information

INTEC Engineering GmbH Energy systems

INTEC Engineering GmbH Energy systems INTEC Engineering GmbH Energy systems INTEC Engineering GmbH is an international company successfully operating in the design, delivery, installation and commissioning of energy systems. INTEC has established

More information

COMPACT FLAME CONTROLLER CFC 2000

COMPACT FLAME CONTROLLER CFC 2000 COMPACT FLAME CONTROLLER CFC 2000 TECHNICAL DESCRIPTION EDITION: TB_CFC2000_EN_REV09_20150408 Important: Please note, that all mounting and wiring as well as all changing or adjustment at the flame monitoring

More information

ATEX GUIDE. A short introduction to ATEX Terminology. Equipment for use in flammable atmospheres. Directive 94/9/EC

ATEX GUIDE. A short introduction to ATEX Terminology. Equipment for use in flammable atmospheres. Directive 94/9/EC Quick Introduction to TÛV Denmark TÜV Denmark - is a part of the TÜV NORD Group a global Organisation f Certification and Inspection of: Quality Management Systems, Products, Processes and Qualification

More information

Hazardous Areas - EXPLOSIONPROOF SOLENOIDS

Hazardous Areas - EXPLOSIONPROOF SOLENOIDS Hazardous Areas - EXPLOSIONPROOF SOLENOIDS SOME HISTORY The classification of hazardous areas into zones established the level of protection required for electrical equipment installed in explosive gas

More information

Spandau Pumps. Sealless Immersion Pumps for Industrial Applications. Overwiev of Products

Spandau Pumps. Sealless Immersion Pumps for Industrial Applications. Overwiev of Products Spandau Pumps Overwiev of Products 1-6000-US Sealless Immersion Pumps for Industrial Applications Centrifugal and screw pumps for low-, medium- and high-pressure applications Quality Management DIN EN

More information

VERSAFLOW VORTEX Supplementary instructions

VERSAFLOW VORTEX Supplementary instructions VERSAFLOW VORTEX Supplementary instructions Vortex flowmeter Equipment category II 2G CONTENTS VERSAFLOW VORTEX 1 Safety instructions 3 1.1 General notes... 3 1.2 EC conformity... 3 1.3 Approval according

More information