Basket Blasters. BB2-3K & BB4-3K Models BB2-3K & BB4-3K Options BB4-3K Basket Blasters

Size: px
Start display at page:

Download "Basket Blasters. BB2-3K & BB4-3K Models BB2-3K & BB4-3K Options BB4-3K Basket Blasters"

Transcription

1 Basket Blasters Section E: Table of Contents BB-K & BB-K Models BB-K & BB-K Options BB-K Basket Blasters BB-K Basket Blasters BB-K & BB-K Parts Electrical Options Cabinet Assembly8 BB-K Cabinet Assembly8 BB-K Electrical Assembly Reclaimer Dust Collectors Blower (Fans & Motors) Ducting/Hoses Pipe String Blast System BBO- & BBO- Models BBO- & BBO- Options BBO- & BBO- Parts Electrical Options Cabinet Assembly Dust Collector Blast guns & nozzles E E E E E E8 E0 E0 E E E E E E9 E9 E9 E0 E E Models: BB-K & BB-K Basket Blasters MODEL PART NUMBER OF DUST BLOWER SHIPPING DESCRIPTION NUMBER BLAST GUNS COLLECTION MOTOR WEIGHT BB-K DCM-80A 0900 standard DCM-80A hp lbs BB-K DCM standard DCM-00 ½ hp 0 lbs BB-K CDC- 090 standard CDC- ½ hp 9 lbs BB-K DCM standard DCM-00 ½ hp 8 lbs BB-K CDC- 00 standard CDC- ½ hp 0 lbs BB-K 00A 00 standard DCM-00A hp lbs BB-K CDC-9 00 standard CDC-9 hp lbs Note: 00 CFM standard Never use silica sand in any Empire equipment. 08/ Page E

2 Options: BB-K Basket Blaster BB-K Basket Blasters (00 and 00 CFM) (All systems supplied with polyurethane spray-lined 00 CFM reclaimer) FACTORY CUSTOMER SEE Single-Phase Electrical Options (00 CFM) INSTALLED INSTALLED PAGE Single Source: 0 volt8 0 hertz for horsepower motor 0 NA E Three-Phase Electrical Options (00 CFM) Single Source: 08 volt8 0 hertz 00 NA E 0 volt8 0 hertz 00 NA E volt8 0 hertz 00 NA E 80 volt8 0 hertz 00 NA E Single-Phase Electrical Options (00 CFM) Single Source: 0 volt8 0 hertz for ½ horsepower motor 0 NA E Three-Phase Electrical Options (00 CFM) Single Source: 08 volt8 0 hertz 00 NA E 0 volt8 0 hertz 00 NA E volt8 0 hertz 00 NA E 80 volt8 0 hertz 00 NA E Cabinet Extended-Wear Options Curtain for rear wall 0 0 E Nozzle8 boron (two required) E PVC-coated basket E Window protector8 plastic E Window protector8 screen E Reclaimer Extended-Wear Options (00 CFM) Ultrawear lining 8 N/A E0 Cabinet Options Automatic blow-off cycle 00 NA E Basket-end covers E Basket with 8 diameter perforations for small parts E (Deduct standard BB basket PN if factory installed.) End-of-cycle light 00 NA E Magnetic separator E Rubber kick flights E Safety matting (specify length) E Vibrating reclaimer screen assembly 0 09 E Vibrating shed sheet 0 0 E continued on next page 08/ Page E

3 Options: BB-K Basket Blaster BB-K Basket Blasters continued FACTORY CUSTOMER SEE INSTALLED INSTALLED PAGE Dust Collector Options for DCM-80A (00 CFM) Bag shaker8 automatic electrical8 volts E Bag shaker8 automatic pneumatic E HEPA filter 0-0- DCM80A DCM80A E HEPA filter8 pressure differential gauge assembly 0 0 E Leg-extension kit E Lid assembly for -gallon drum 0 0 E Manometer E Sound attenuator/damper 0 0 E Dust Collector Options for DCM-00 (00 CFM) Bag shaker8 automatic electrical8 volts E Bag shaker8 automatic pneumatic E HEPA filter 0 0 E HEPA filter8 pressure differential gauge assembly 0 0 E Leg-extension kit E Lid assembly for -gallon drum 0 0 E Manometer E Sound attenuator/damper 0 0 E Dust Collector Options for CDC- (00 CFM) HEPA filter 0 0 E8 HEPA filter8 pressure differential gauge assembly 0 0 E8 Photohelic cartridge cleaning8 automatic pulse E8 Leg-extension kit E8 Lid assembly for -gallon drum 0 0 E8 Sound attenuator 0 0 E8 Higher Volume Ventilation Options 900 CFM equipment Call factory Call factory 00 CFM equipment Call factory Call factory 08/ Page E

4 Options: BB-K Basket Blaster BB-K Basket Blasters (00 and 900 CFM) FACTORY CUSTOMER SEE Single-Phase Electrical Options (00 CFM) Single Source: 0 volt8 0 hertz for ½ horsepower motor INSTALLED 0 INSTALLED NA PAGE E Three-Phase Electrical Options (00 CFM) Single Source: 08 volt8 0 hertz 00 NA E 0 volt8 0 hertz 00 NA E volt8 0 hertz 00 NA E 80 volt8 0 hertz 00 NA E Three-Phase Electrical Options (900 CFM) Single Source: 08 volt8 0 hertz 009 NA E 0 volt8 0 hertz 009 NA E volt8 0 hertz 009 NA E 80 volt8 0 hertz 009 NA E Cabinet Extended-Wear Options Curtain for rear wall 0 0 E Nozzle8 boron (three required) E PVC-coated basket E Window protector8 plastic E Window protector8 screen E Reclaimer Extended-Wear Options (00 CFM) Ultrawear lining 8 N/A E0 Reclaimer Extended-Wear Options (900 CFM) Ultrawear lining 9 N/A E0 Cabinet Options Automatic blow-off cycle 00 NA E Basket-end covers 09 NA E Basket with 8 diameter perforations for small parts E (Deduct standard BB basket PN 0 if factory installed.) End-of-cycle light 00 NA E Magnetic separator E Rubber kick flights 0?????? E Safety matting (specify length) E Vibrating reclaimer screen assembly 0 09 E Vibrating shed sheet 0 0 E Dust Collector Options for DCM-00 (00 CFM) Bag shaker8 automatic electrical8 volts E Bag shaker8 automatic pneumatic E HEPA filter 0 0 E HEPA filter8 pressure differential gauge assembly 0 0 E Leg-extension kit E Lid assembly for -gallon drum 0 0 E Manometer E Sound attenuator/damper 0 0 E continued on next page 08/ Page E

5 Options: BB-K Basket Blaster BB-K Basket Blasters continued FACTORY CUSTOMER SEE INSTALLED INSTALLED PAGE Dust Collector Options for CDC- (00 CFM) HEPA filter 0 0 E8 HEPA filter8 pressure differential gauge assembly 0 0 E8 Photohelic cartridge cleaning8 automatic pulse E8 Leg-extension kit E8 Lid assembly for -gallon drum 0 0 E8 Sound attenuator/damper 0 0 E8 Dust Collector Options for DCM-00A (900 CFM) Bag shaker8 automatic electric8 volts E Bag shaker8 automatic pneumatic E HEPA filter 0 0 E HEPA filter8 pressure differential gauge assembly 0 0 E Leg extension kit E Lid assembly for gallon drum 0 0 E Manometer E Sound attenuator/damper E Dust Collector Options for CDC-9 (900 CFM) HEPA filter 0 0 E8 HEPA filter8 pressure differential gauge assembly 0 0 E8 Photohelic cartridge cleaning8 automatic pulse E8 Leg extension kit E8 Lid assembly for gallon drum 0 0 E8 Sound attenuator/damper E8 Higher Volume Ventilation Options 00 CFM equipment Call factory Call factory 08/ Page E

6 Parts: BB & BB-K Electrical Options Standard Wiring BB-K and BB-K basket blasters are wired for a 0 volt, 0 hertz, three-phase electrical source. IMPORTANT! Systems must be wired at the factory to match the customer s electrical supply. If the electrical supply at the installation site differs from 0V/0Hz/Phase, specify the appropriate part number(s) shown below. Customer installed electrical options are not available with BB-K and BB-K basket blasters. Part Numbers for Three-Phase Options NOMINAL VOLTAGE/FREQUENCY 08V/0Hz 0V/0Hz V/0Hz 80V/0Hz* PART NUMBERS 00 CFM/ horsepower (BB-K only)8 single source8 factory installed CFM/½ horsepower, single source8 factory installed CFM/ horsepower, single source8 factory installed * 0 hertz systems with reclaimers may not convey heavier media, especially when using multiple guns, large nozzles and at high altitudes. Consult factory. Part Numbers for Single-Phase Options BB-K, 00 CFM/ horsepower connection to 0V/0Hz/Ph ( wire) supply requires: Part Number 0 BB-K, 00 CFM/½ horsepower connection to 0V/0Hz/Ph ( wire) supply requires: Part Number 0 BB-K, 00 CFM/½ horsepower connection to 0V/0Hz/Ph ( wire) supply requires: Part Number 0 NOTES on Electrical Components If no electrical disconnect is provided, the customer is responsible for providing appropriate disconnecting means adjacent to this equipment for each incoming power circuit. Each disconnect shall be of a type and rating suitable for the application. Refer to current editions of the National Electrical Code (NFPA 0) and the Electrical Standard for Industrial Machinery (NFPA 9). Systems with a line cord plug do not require a disconnect. Interconnections between cabinet, dust collector and customer s utilities are to be supplied by installer. Electrical components cannot be returned to the factory for exchange. All standard systems are three-wire ( phase conductors and a ground). Consult factory for other electrical options, for conformance with customer electrical specifications, or if you have questions. See Operating Instructions for Proper Electrical Connections Electrical connections at installation should be performed by a competent licensed electrician following local codes, standard safety procedures and proper installation instructions. Never use silica sand in any Empire equipment. 08/ Page E

7 Parts: BB-K Cabinet Assembly BB-K Cabinet Components Item Description Part # Motor8 horsepower 09 Reducer8 0/0/ Call Flange bearing ( required) 00 Felt washer ( required) 008 Back shaft8 drive Filter ( required) 0 Coupling8 8 bore 0 Coupling8 bore 0 Coupling8 spider 0 Label 8 Sprocket ( required) 0 8 Chain8 (specify length) 0 Idler sprocket 0 9 Fixed tensioner 0 Shaft tightener 00 0 Electrical assembly (See page E0.) 00 Limit switch Door handle 9 Latch8 draw breaker ( required) 09 Shim plate 098 Door keeper Window kit (includes items listed below) 0 * Gasket8 window8 section Gasket8 ¼ x ¼ (specify length) 9 Safety glass8 x 00 Knob8 8 - ( required) 0 Frame8 window 09 Spacer8 window ( required) 9 Bolt8 8 - x ¼ ( required) 8 Gasket8 light bulb 809 Fixture8 incandescent * Lamp8 incandescent 0 Basket8 perforations Gun assembly8 MH- (See page E.) 0 Fixed gun holder Extension arm 0 Mounting bracket 09 Knuckle assembly 0 9 Chain8 guard 0 Gun8 dust off 098 Wheel 09 Air hose assembly Door gasket8 (specify length) Compression latch8 80 turn 0900 Latch seal 9 Hinge 00 Parts door Gasket8 x x (specify length) Front shaft 8 Blast hose8 8 x (specify length) Felt washer ( required) Flange bearing ( required) 00 Pipe-string assembly8 (See page E.) 00 Screen8 removable8 perforated steel Hose adapter 0 Gasket8 hose adapter 8 Conveying hose8 heavy duty8 x 9 0 Blast plate (order with Red Sheet) Red sheet (order with Blast Plate) 800 Air-hose assembly8 ¼ x 08 Air-hose assembly8 ¼ x 9 08 Guide to Part Numbers 0 8 Item Description Part # 8 Versa valve assembly 000- Versa valve assembly used with blow off 000- * Essential component to prevent downtime Recommended spare part Consumable wear item Failure to replace glass with Empire safety glass could result in serious injury See detail above / Page E

8 Parts: BB-K Cabinet Assembly BB-K Cabinet Components Item Description Part # Label 8 Sprocket ( required) 0 Chain8 (specify length) 0 Idler sprocket 0 Fixed tensioner 0 Shaft tightener 00 Coupling8 8 bore 0 Coupling8 bore 0 Coupling8 spider 0 Back shaft8 drive Filter ( required) 0 8 Right guard sleeve 9 Pipe cap 0 Rollers ( required) 09 Mixing head 80 Bellows8 ( required) 00 Hose clamp8 ( required) 0 Bellows clamp plate Left guard sleeve Motor8 horsepower 09 Reducer 0988 Electrical panel (See page E0.) 000 Limit switch Door handle 9 Latch8 draw breaker ( required) 09 Shim plate 098 Door keeper Window kit (includes items listed below) 0 * Gasket8 window8 section Gasket8 ¼ x ¼ (specify length) 9 8 Safety glass8 x 00 Knob8 8 - ( required) 0 Frame8 window 09 Spacer8 window ( required) 9 Bolt8 8 - x ¼ ( required) 8 9 Gasket8 light bulb Fixture8 incandescent * Lamp8 incandescent 0 Basket8 perforations 0 Gun assembly8 MH- (See page E.) 0 Label 8 Chain guard Wheel ( required) 09 Gun8 dust off 098 Air hose assembly 8 Door gasket8 (specify length) 9 Compression latch8 80 turn 0900 Latch seal 9 0 Hinge 00 Parts door Gasket8 x x (specify length) Front shaft8 driver Blast hose8 8 x (specify length) 080 Guide to Part Numbers See detail above. See - above. * Essential component to prevent downtime Recommended spare part Consumable wear item Failure to replace glass with Empire safety glass could result in serious injury. continued on next page 08/ Page E8

9 Parts: BB-K Cabinet Assembly BB-K Cabinet Components Item Description Part # Limit switch ( required) Limit switch tripper 88 Operating lever Clevis rod 0 Clevis pin ( required) 0 Air cylinder 00 Valve8 flow control ( required) 8 Versa valve assembly Versa valve assembly used with blow off 000- Versa valve body 00- Muffler 0 9 UHMW guide 0 Flange bearing ( required) 00 Felt washer ( required) 008 Pipe-string assembly8 (See page E.) 00 Screen8 removable8 perforated steel Hose adapter 0 Gasket8 hose adapter 8 Conveying hose8 heavy duty 0 Blast plate (order with Red Sheet) Red sheet (order with Blast Plate) 800 Air-hose assembly8 ¼ x 0 Air-hose assembly8 ¼ x 08 8 Air-hose assembly8 ¼ x Air-hose assembly8 ¼ x 08 Connector assembly (not shown) 0 * Essential component to prevent downtime Recommended spare part Consumable wear item Failure to replace glass with Empire safety glass could result in serious injury. Guide to Part Numbers See detail above. 0 08/ Page E9

10 8 9 Parts: BB & BB-K Electrical Panel Guide to Part Numbers BB & BB ELECTRICAL PANEL COMPONENTS Item Description PART NUMBER Push button8 red 90F Timer8 blast 0 Operator potentiometer 9F Motor controller (not shown) 00 Automatic blow off8 optional (items & ) Timer 0 Push button8 black 90F Push button8 grey 90F Push button8 black 90F Contact block 9F 8 Push button8 green 90F System On System Off 8 Cycle Start Basket Jog Manual Blowoff Cycle Start Blast Time Basket Speed 0 Blowoff Time 0 Parts: BB & BB-K Reclaimers BB & BB RECLAIMER COMPONENTS 00 CFM 900 CFM Item Description PART NUMBER Reclaimer body assembly (includes items through ) 00 0 Urethane lining (not shown) Standard with system 8 89 * Removable top Gasket8 reclaimer to storage hopper and outlet flange Gasket8 reclaimer door Door8 reclaimer 0 0 Wing nut8 ¼ Gasket8 reclaimer to storage hopper 8 Gasket8 tuning band8 solid Gasket8 tuning band8 with slots 9 Tuning band (steel part only)8 solid 8 8 Tuning band (steel part only)8 with slots Bolt8 ¼ - 0 x 8 8 Latch & keeper (requires welding) Screen8 flat8 8 OD 0 0 Screen8 fine ½ OD8 8 mesh Bolt8 8 - x (8 required) 8 8 Plug8 NPT Inlet wear plate (detail) FACTORY INSTALLED 8 9 CUSTOMER INSTALLED A Rubber band B Bolt8 8 - x ( required) C Metal band D Bolt8 8 - x ½ ( required) E Nut8 8 - * Recommended spare part Consumable wear item Essential component to prevent downtime B C D E Reclaimer Options Ultrawear lining extends reclaimer life by a factor of ten. Part Number 00 CFM reclaimers CFM reclaimers 9 A 08/ Page E0

11 Parts: BB & BB-K Dust Collectors, Bag House Guide to Part Numbers For DCM-80A (PN 000), DCM-00 (PN 000) & DCM-00A (PN 00) DCM SERIES COMPONENTS Item Description PART# Bolt8 levelling8 8 - x ( required) 89 Latch and keeper (requires welding) 098 Hose with fittings8 ¼ x 8 dust collector Adapter8 ¼ tube x ¼ MPT (inlet) 08 Bolt8 8 - x ¼ ( required) 8 Knob8 8 - ( required) 0 Access door8 dust collector 08 8 Gasket8 access door8 8 x section Gasket8 8 x 8 (specify length) 0 Valve8 push-button8 8 NPT & #0-8 P 9 Barbed fitting8 ¼ tube x #0-8 per assembly 0 Adapter8 ¼ tube x 8 MPT8 90 (for air cylinder) 0 0 Tubing8 ¼ OD (8 required) 0 Air cylinder8 standard collector and auto shaker 98 Air cylinder8 auto-pneumatic bag shaker only Gasket8 top plate8 8 x ¼ (8 for DCM-80A; for others) Blower & blower motors (See page E.) Top plate8 DCM-80A 08 Top plate8 DCM-008 DCM-00A 090 Top plate8 DCM-00B 08 Bag-rack weldment (DCM-80A) 08 Bag-rack weldment (DCM-00A) 09 Rubber bumper (8 required) * Dust bag8 cotton sateen ( required for DCM-80A)8 (0 required for DCM-00 & DCM-00A) Decal8 Empire logo 0 Decal8 orange dot strip 0 Paint8 oz. aerosol8 beige 8 Decal8 Instruction/Warning 0 9 Ducting & adapters (See page E.) 0 Adapter8 0 8 ID x x OD8 DCM Gasket8 clean-out door8 dust collector 0 9 * Recommended spare part Consumable wear item Essential component to prevent downtime Bag-House Dust Collector Options PART NUMBERS FACTORY CUSTOMER SEE INSTALLED INSTALLED PAGE Automatic bag shaker cleans bags thoroughly every time the system is turned off. Electric shaker for all bag-house collectors E Pneumatic shaker for DCM-80A Call Pneumatic shaker for DCM-00 & DCM-00A Call HEPA filter captures very fine particles. 0 0 HEPA filter, pressure differential gauge assembly informs operator regarding filter cleanliness. 0 0 Leg extension kit raises collector so larger collection drum can be placed underneath. Kit for DCM-80A Kit for DCM-00 & DCM-00A Lid assembly for gallon drum attaches securely to clean-out door. 0 0 E Manometer keeps operator informed regarding bag cleanliness Sound attenuator/damper reduces noise in the work place. Attenuator/damper for DCM-80A & DCM Attenuator/damper for DCM-00A SuperSmooth dust bags handle severe dust loading / Page E

12 Parts: BB & BB-K Dust Collectors, Cartridge Guide to Part Numbers For CDC- (PN 00) & CDC-9 (PN 0) CDC SERIES COMPONENTS Item Description PART# Bolt8 leveling8 8 - x ( required) 89 gallon drum 00 Lid for gallon drum Gasket8 dust drum lid8 (not shown) 800 Dust hose8 (specify length) 9 Hose clamp8 ( required) 0 gallon drum assembly (includes items through ) 0 Filter clamping screw Gasket8 access door8 8 x section Gasket8 8 x 8 (specify length) 0 8 Access door8 dust collector 08 9 Knob8 8 - ( required) 0 0 Bolt8 8 - x ¼ ( required) 8 Empire logo 0 Blower and blower motors (See page E.) Diaphragm valve ( required) 0 Top plate8 CDC- 090 Top plate8 CDC Top plate8 CDC- 08 Air supply assembly 08 * Cartridge filter ( required) Decal8 Instruction/Warning 0 Mini-Helic package 00 8 Ducting and adapters (See page E.) 9 Adapter8 0 ID x OD for CDC * Recommended spare part Consumable wear item Essential component to prevent downtime Cartridge Dust Collector Options PART NUMBERS FACTORY CUSTOMER SEE INSTALLED INSTALLED PAGE HEPA filter captures very fine particles. 0 0 HEPA filter, pressure differential gauge assembly informs operator regarding filter cleanliness. 0 0 Leg extension kit raises collector so larger collection drum can be placed underneath Lid assembly for gallon drum attaches securely to clean-out door. 0 0 E Photohelic cartridge cleaning improves system performance8 saves operator time E8 Sound attenuator/damper reduces noise in the work place. Attenuator/damper for CDC- 0 0 Attenuator/damper for CDC / Page E

13 Parts: BB & BB-K Blowers (Fans & Motors) Blower Assembly Part Numbers For Dust Collector Models Horsepower Part Number Standard Electrical CFM at SP Notes DCM-80A 0 /0/ 00 Bag not included DCM-00 & CDC- ½ 0 0/0/ 00 SP at 00 CFM DCM-00A & CDC /0/ 900 SP at 900 CFM Note: Motor starters8 contactors8 interconnecting wiring and ducting not included. Guide to Part Numbers BLOWER COMPONENTS PART NUMBERS Item Description HP ½ HP HP Motor8-0V8 0 Hz8 Single phase Motor8 0-80V8 0 Hz8 phase Motor8 0-00V8 0 Hz8 phase Motor8 0-0V8 0 Hz8 Single phase Note: Motor part numbers shown in BOLD are supplied as standard most often. Housing8 fan8 top Screw8 flat head 8 - x Gasket8 fan housing8 8 x ¼ ( section) Screw8 flat head 8 - x ¼ (dust collector) Gasket8 mounting ( required) Clip8 fan guard ( required) 8 Guard8 fan outlet Outlet flange Hex nut8 ¼ -0 Lock washer8 ¼ Flat washer8 ¼ Housing8 fan8 bottom Impeller (fan blade)8 0 8 dia.8 8 ID 0 Impeller (fan blade)8 ½ dia.8 8 ID Impeller (fan blade)8 ½ dia.8 8 ID 0 Bolt8 ¼ -0 x Essential component to prevent downtime / Page E

14 Parts: BB & BB-K Ducting/Hoses Guide to Part Numbers BB-K & BB-K Ducting/Hoses PART Item Description NUMBER Hose clamp8 heavy-duty conveying hose ( required) 9 Hose clamp8 dust hose ( required) 0 Dust hose8 x 0 Screw8 ¼ x 08 self drill ( required) 0 Adapter8 O.D. x 0 I.D.8 DCM-00 & CDC- 80 Hose clamp8 dust hose ( required) 0 Heavy-duty conveying hose ( required) 9 8 Bolt8 ¼ 0 x ( required) 9 Outlet adapter8 cabinet 0 0 Gasket8 cabinet outlet Parts: BB & BB-K Pipe String Guide to Part Numbers BB-K & BB-K Pipe String Item Description PART# Air hose8 ½ (Specify length.) 08 Hose clamp8 ½ 00 Hose barb8 ½ NPT 00 Pipe bushing8 x ½ 9 Elbow8 NPT street Tee8 Close nipple 0 8 Pipe coupling Pipe nipple Vent Quick clamp with feet Hose adapter8 ¼ x ¼ 0 Adapter Item Description PART# Air filter8 manual Element for air filter8 µ 0800 O-ring and gasket kit for Norgren air filter 0 Porting block Quick clamp Air pressure regulator Diaphragm and O-ring for regulator 08 8 Gauge8 ¼ NPT 0 Main valve8 Aquamatic 0 Diaphragm and seal kit for Aquamatic 8 9 Special wrench for Aquamatic 8 Repair kit for Aquamatic includes 8 kit 8 0 Tank coupling8 08 Safety pin 0 Hose barb 08 Air hose8 (Specify length.) 09 Hose clamp8 00 Essential component to prevent downtime 08/ Page E

15 Parts: BB & BB-K Hopper Assembly Guide to Part Numbers Item Description PART# Hopper8 multi-gun 08 Gasket8 reclaimer to hopper 8 Air hose8 ½ ID (Specify length.) 08 Blast hose8 8 ID (Specify length.) 080 SAR- media regulator8 complete8 ¼ FPT 90 SAR- media regulator8 body Nipple8 ¼ NPT x Plug8 ¼ NPT * Recommended spare part Consumable wear item Essential component to prevent downtime Parts: BB & BB-K Blast Guns MH- Guns Item Description PART NUMBER * Gun body8 MH- short handle * Nozzle8 Di-Carb (standard) 0 * Air jet8 (green) 0 * Nozzle adapter8 plastic 0 Nut8 hose clamp8 MH- 008 O-ring ID x OD 88 Screw set8 ¼ 0 x Connector8 MH- 0 9 Hose barb8 ½ FPT x ½ hose 00 0 O-ring8 ½ ID x 8 OD ( required) A B * Recommended spare part Consumable wear item Essential component to prevent downtime MH- Suction Gun Assemblies PART NUMBERS Short-Handle Gun with Nozzle (Air Jet) Diameters ¼ ( 8 ) ( ) ( ) Ceramic nozzle Di-Carb nozzle Boron nozzle Short-handle gun with ceramic nozzle supplied as standard. Nozzles for MH- Guns Diameter (#) ¼ (#) (#) (#) PART NUMBERS Ceramic (each) Ceramic (0 pack) Di-Carb (each) Boron (each) Optional for Wide-Spray Setup Item Description PART NUMBER A * Compression ring B * Di-Carb nozzle8 8 wide spray 0 Boron nozzle8 8 wide spray 0 * Recommended spare part Consumable wear item Air Jets for MH- Guns Diameter Designation Note PART NUMBER orange 0 8 yellow 0 green Standard 0 blue 08 white 09 ¼ red 00 08/ Page E

16 Options Details: BB & BB-K Cabinets PART NUMBERS Cabinet Options FACTORY CUSTOMER INSTALLED INSTALLED Automatic blow off cycle removes dust and fines at the end of each blast cycle. BB-K 00 NA BB-K 00 NA Basket end covers retain fly-away parts Basket with 8 perforations handles smaller parts. (Deduct PN 0 if factory installed.) BB-K BB-K Basket with PVC coating improves durability. (Deduct PN 0 if factory installed.) BB-K BB-K End-of-cycle light indicates completion of blast cycle. (Must be purchased with automatic blow off.) 00 NA Magnetic separator removes ferrous debris during media recycling. Rubber kick flights improve tumbling action, promote more even processing of parts. 0 NA Rubber curtains shield cabinet interior from harsh abrasives8 prolong equipment life. Attaching these neoprene curtains requires ¼ 0 studs8 brass grommets and rubber nuts (PN ). Safety matting protects cabinet floors and workers. (Two-foot-wide safety matting8 with pockets to catch spilled media8 is sold by the linear foot. Fourteen feet required around cabinet. Specify total length required when ordering.) Vibrating screen assures smooth flow of light and fine media Vibrating Screen Components Item Description PART # Regulator8 relieving Air valve8 pilot operated 90 Breather vent Socket-head cap 0 Vibrator 9 Muffler8 8 bronze 8 Spacer 9 Vibrating shed sheet simplifies unloading of parts. 0 0 Window protector8 made of clear plastic8 is recommended for use with light8 less aggressive abrasives Window protector8 consisting of a steel screen8 protects against heavy and coarse media / Page E

17 Options Details: Dust Collectors Bag House Dust Collector Options PART NUMBERS For DCM-80A (PN 000), DCM-00 (PN 000) & DCM-00A (PN 00) FACTORY CUSTOMER INSTALLED INSTALLED Bag shaker, automatic electric, cleans bags thoroughly every time the system is turned off For DCM-80A8 DCM-00 & DCM-00A Bag Shaker, Automatic Electric Components Item Description PART # Pressure switch8 differential 0 Timer 08 Flasher Solenoid valve8 0 VAC Cylinder (not included; standard with collector) 98 Bag shaker, automatic pneumatic for DCM-80A For part information: Call factory. Bag shaker, automatic pneumatic for DCM-00 & DCM-00A For part information: Call factory. HEPA filter captures very fine particles. 0 0 Replacement filter 0 0 HEPA filter, pressure differential gauge assembly informs operator regarding filter cleanliness. 0 0 Leg extension kit raises collector so larger collection drum can be placed underneath. Kit for DCM-80A Kit for DCM-00 & DCM-00A Lid assembly for gallon drum attaches securely to clean-out door. 0 0 Lid Assembly Components Item Description PART # Hose clamp8 0 Dust hose8 light-duty8 9 Hose clamp8 0 Adapter 0 Lid8 gallon drum 00 Gasket for lid (not shown) 800 Manometer keeps operator informed regarding bag cleanliness Sound attenuator/exhaust damper reduces noise in the work place. Attenuator/damper for DCM-80A & DCM Attenuator/damper for DCM-00A / Page E

18 Options Details: Dust Collectors Cartridge Dust Collector Options PART NUMBERS For CDC- (PN 00) & CDC-9 (PN 0) FACTORY CUSTOMER INSTALLED INSTALLED HEPA filter captures very fine particles. 0 0 Filter replacement 0 0 HEPA filter, pressure differential gauge assembly informs operator regarding filter cleanliness. 0 0 Leg extension kit raises collector so larger collection drum can be placed underneath Lid assembly for gallon drum attaches securely to clean-out door. (Page E.) 0 0 Manometer keeps operator informed regarding bag cleanliness Photohelic cartridge cleaning improves system performance8 saves operator time Photohelic Cleaning Components Item Description PART # Photohelic gauge 00 Solenoid valve Timer board 8090 Diaphragm valve ( required) 0 (Not included; standard on collector) Sound attenuator/exhaust damper reduces noise in the work place. Attenuator/damper for CDC- 0 0 Attenuator/damper for CDC / Page E8

19 Models: BBO- & BBO- Basket Blasters MODEL PART NUMBER OF DUST BLOWER SHIPPING DESCRIPTION NUMBER BLAST GUNS COLLECTION MOTOR WEIGHT BBO 080 standard 00 lbs BBO standard Dust Bag 00 lbs BBO- 080 standard DC- hp 0 lbs Options: BBO- & BBO- Basket Blasters Single-Phase Electrical Options Single Source: FACTORY CUSTOMER SEE INSTALLED INSTALLED PAGE 08-0 volt8 0-0 hertz with dust bag 9 Call factory Below 08-0 volt8 0-0 hertz with DC- collector 9 Call factory Below Cabinet Extended-Wear Options Arbonited basket E0 Nozzle8 ¼ boron (requires PN 09 adapter) E Nozzle8 ¼ DiCarb 0 0 E Cabinet Options Blow-off gun assembly E0 Dust Collector Options DC- for BBO- (included with BBO-) E Parts: BBO- & BBO- Electrical Options Standard Wiring BBO basket blasters are wired for a volt, 0 hertz, single electrical source. Optional Wiring A factory installed transformer (Part Number 9 with dust collector or Part Number 9 with dust bag) is available for 08-0 volt, 0-0 hertz, single phase electrical sources with two or three wires. IMPORTANT! Systems must be wired at the factory to match the customer s electrical supply. NOTES on Electrical Components No electrical disconnect is provided. The customer is responsible for providing appropriate disconnecting means adjacent to this equipment for each incoming power circuit. Each disconnect shall be of a type and rating suitable for the application. Refer to current editions of the National Electrical Code (NFPA 0) and the Electrical Standard for Industrial Machinery (NFPA 9). Systems with a line cord plug do not require a disconnect. Electrical components cannot be returned to the factory for exchange. See Operating Instructions for Proper Electrical Connections Electrical connections at installation should be performed by a competent licensed electrician following local codes, standard safety procedures and proper installation instructions. 08/ Page E9

20 Parts: BBO- & BBO- Cabinet Assembly Guide to Part Numbers BBO- & Cabinet Assembly PART Item Description NUMBER * Shaft grommet Motor bracket 8 * Motor8.0 HP8 V/0Hz/Ph 98 * Shaft bearing (pillow block) 0 Shaft washer8 felt 09 Shaft 89 * Roll pin8 8 x 8 8 * Dust hose8 light duty8 x 9 9 Adjustable clamp8 0 0 Gasket8 ¼ x ½ ( length required) 8 Line cord8 0V8 with plug 90 Adapter ring 8 Receptacle8 0V 0 Elbow8 90 Double tube clip 0 Tee8 ¼ 0 Elbow street Nipple8 ¼ x TOE ( required) 0 9 * Air hose8 ½ x Basket assembly8 uncoated8 holes Basket assembly8 PVC coated8 8 (max.) holes * Plug8 quick disconnect 8 Fuse holder * Fuse8 0 Amp 8 Indicator light * Timer 0 Air gauge 0 Media hose8 ½ x 08 * Plug8 ¼ diameter ( required) 8 8 * Screen assembly (screen8 clamp8 cap) 0 9 Orifice tip 9 0 * Hose assembly8 ¼ x 8 ( required) MH- suction gun (See page E.) 0 * Door gasket kit (set of 8 x 8 with hole) Nut plate 8 Gun holder 8 Keeper ( required) 099 Media hose8 ½ x PART Item Description NUMBER Hose barb8 ½ hose x 8 NPT 0 8 Latch ( required) * Socket8 quick disconnect 00 0 Nipple8 ¼ 8 close 9 Coupling 9 Bulkhead fitting 9 Lock nut 9 Plug (valve body) 0 Wire tie ( required) 8 Handle ( required) * Plug8 ¼ diameter ( required) 8 8 * Solenoid valve 9 9 * Hose assembly8 ¼ x 8 ( required) Air filter/regulator8 ¼ NPT 08 0 * Repair kit includes diaphragm8 O-ring & element 08 * Essential component to prevent downtime Recommended spare part consumable wear item Cabinet Options Factory Installed PART NUMBERS BBO- BBO- Arbonited basket extends service life. Blow-off gun assembly removes dust and fines / Page E0

21 Parts: BBO- Dust Bag Guide to Part Numbers BBO- Dust Bag Part Item Description Number Clamp8 8 adjustable 0 * Dust bag 000 Clamp8 dust bag closure 0 * Essential component to prevent downtime The BBO- basket blaster includes the dust bag shown. A DC- dust collector (Part Number ) detailed below is optional. Parts: BBO- Dust Collector DC- Dust Collector (Part # ) Item Description Part# Sound attenuator cover 09 Hush cloth8 ½ x x 8¼ ( pieces) 0 Bolt8 hex head8 8 - x ¼ 8 Bracket8 sound attenuator Spring extension Line cord8 0 V 90 Gasket tape8 lid Threaded rod 00 9 Gasket 0 Drum8 gallon 00 Wing nut Flat washer * Filter cartridge 0 Gasket8 fan (two required) Lid weldment 08 Blower8 0 V8 0 Hz8 Single phase8 CFM * Recommended spare part Consumable wear item Essential component to prevent downtime / Page E

22 Parts: BBO- & BBO- Blast Gun MH- Suction Blast Gun Item Description Part# MH- gun8 ¼ ceramic nozzle8 air jet (standard) 0 MH- gun8 ceramic nozzle8 8 air jet 0 MH- gun8 ¼ Di-Carb nozzle8 air jet 0 MH- gun8 Di-Carb nozzle8 8 air jet 0 Suction head 0 Set screw8 ¼ 0 x 8 0 O-ring 89 * Air jet with O-ring8 8 (yellow) (standard) 08 * Air jet with O-ring8 (orange) 08 Elbow8 ¼ x 8 9 Hose clamp (not included with gun) 09 Nipple8 ¼ 9 8 Hose clamp (not included with gun) 09 9 Hose barb8 ½ x 8 MPT 0 0 * Nozzle8 ceramic8 ¼ (standard) 0 Nozzle adapter (ceramic & Di-Carb nozzles) 090 Nozzle adapter (Boron carbide nozzle only) 09 * Recommended spare part Consumable wear item Essential component to prevent downtime Nozzles for MH- Guns Diameter ¼ Part Numbers Ceramic (each) 0 00 Ceramic (0 pack) 00 0 Di-Carb (each) 0 0 Boron carbide (each) 00 NA Boron carbide nozzle requires nozzle adapter, PN 09 08/ Page E

Parts for Obsolete Systems

Parts for Obsolete Systems Parts for Obsolete Systems Section G: Table of Contents Basket Blasters BB-A & BB-A Basket Blasters BB Basket Blaster BB Basket Blaster BBO Basket Blaster Econo-Finish Systems S-Series S-0 Econ-O-Cab (or

More information

Operating Instructions for the BBO-1 and BBO-2 Basket Blasters

Operating Instructions for the BBO-1 and BBO-2 Basket Blasters Operating Instructions for the BBO-1 and BBO-2 Basket Blasters 2101 West Cabot Boulevard Langhorne, PA 19047-1893 www.empire-airblast.com Page 2 Model Number: Serial Number: Date of Purchase: Date of Installation:

More information

sroformer Cabinet Systems

sroformer Cabinet Systems sroformer Cabinet Systems Section B: Table od Contents Cabinet Models Options ProFormer Cabinets B ProFormer Cabinets B Parts Electrical Options Cabinet Assembly Reclaimer Dust Collector Blower (Fan &

More information

ECOJET EJ-10E & EJ-7E ELECTRIC CONVECTION STEAMER W/TWIN GENERATORS PARTS AND SERVICE MANUAL

ECOJET EJ-10E & EJ-7E ELECTRIC CONVECTION STEAMER W/TWIN GENERATORS PARTS AND SERVICE MANUAL ECOJET EJ-10E & EJ-7E ELECTRIC CONVECTION STEAMER W/TWIN GENERATORS PARTS AND SERVICE MANUAL EFFECTIVE JULY 31, 2014 Superseding All Previous Parts Lists. The Company reserves the right to make substitution

More information

Parts and Service Manual

Parts and Service Manual Section II Parts and Service Manual (70241A) CLARKE TECHNOLOGY Operator's Manual - MINI MAX Page -29- Frame and Front Cover Assembly Drawing 2/01 Page -30- CLARKE TECHNOLOGY Operator's Manual -MINI MAX

More information

Packed With Features. Smart Pulsar controls are conveniently

Packed With Features. Smart Pulsar controls are conveniently Packed With Features Filter cartridge is automatically cleaned each time the pedal is operated. Pull-through exhaust fan reduces wear on impeller blades. Unique Air Logic System maximizes air flow to the

More information

WASHER/DRYER CONTROL PANEL PARTS

WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 3398879 Harness, Console Wiring (Automatic) (Includes Illus. 1A, 1B & 1C) 1A 3350130 Plug, Terminal (2 Way) (Connects With Main Dryer Harness)

More information

PARTS MANUAL. American Dish Service ADS CONVEYOR DISHWASHER MODELS: ADC-44 L-R/R-L EFFECTIVE: SEPTEMBER 1, 2001

PARTS MANUAL. American Dish Service ADS CONVEYOR DISHWASHER MODELS: ADC-44 L-R/R-L EFFECTIVE: SEPTEMBER 1, 2001 EFFECTIVE: SEPTEMBER 1, 2001 ADS CONVEYOR DISHWASHER MODELS: ADC-44 L-R/R-L PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 211-0044L-R / 212-0044R-L ADC-44 Conveyor Dishwasher 2

More information

Home Stack Washer/Dryers

Home Stack Washer/Dryers Home Stack Washer/Dryers Refer to Page 3 for Model Numbers Parts SWD456C_806093 www.alliancelaundry.com Part No. 806093R1 December 2016 Table of Contents Title Page Parts Ordering Information... 2 Serial

More information

Home Stacked Washer/Dryer

Home Stacked Washer/Dryer Home Stacked Washer/Dryer Refer to Page 3 for Model Numbers Parts SWD443C_802107 www.comlaundry.com Part No. 802107R6 August 2014 Table of Contents Title Page Parts Ordering Information... 2 Serial Plate

More information

Packed With Features ACCESSIBLE. Filter cartridge is automatically cleaned each time the pedal is operated.

Packed With Features ACCESSIBLE. Filter cartridge is automatically cleaned each time the pedal is operated. Packed With Features Filter cartridge is automatically cleaned each time the pedal is operated. Pull-through exhaust fan reduces wear on impeller blades. Unique Air Logic System maximizes air flow to the

More information

CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN. A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO

CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN. A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN HSROG ML-111148 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43003 (June 2001) HOT SECTION 26 OVEN TOP SECTION

More information

An ibuy Stores Company

An ibuy Stores Company REVISED STARTING SERIAL NO. 060604 PARTS MANUAL Model SK-4 4 DOWNCUT CONCRETE/ASPHALT WALK BEHIND SAWS SKU NO. MODEL POWER OPTION 45400D SK4-9H HONDA ENGINE 9 HP GX0 45600D SK4-H HONDA ENGINE HP GX40 4800D

More information

WU701 BLOWER/AIR INLET & WATER LEVEL FLOAT

WU701 BLOWER/AIR INLET & WATER LEVEL FLOAT WU701 BLOWER/AIR INLET & WATER LEVEL FLOAT WU701 BLOWER/AIR INLET & WATER LEVEL FLOAT 2 310217 NO LONGER AVAILABLE (S/P) 3 900882 SWITCH, WATER LEVEL (S/P) 4 900911 FLOAT SWITCH & BRACKET ASSM (S/P) 5

More information

Homestyle Stack Washer/Dryers

Homestyle Stack Washer/Dryers Homestyle Stack Washer/Dryers Refer to Page 3 for Model Numbers Parts SWD456C_806105 www.alliancelaundry.com Part No. 806105R1 November 2015 Table of Contents Title Page Parts Ordering Information...

More information

Home Stack Washer/Dryers

Home Stack Washer/Dryers Home Stack Washer/Dryers Refer to Page 3 for Model Numbers Parts SWD456C_806093 www.alliancelaundry.com Part No. 806093R4 September 2018 Table of Contents Title Page Parts Ordering Information... 2 Serial

More information

Homestyle Stacked Washer/ Dryer

Homestyle Stacked Washer/ Dryer Homestyle Stacked Washer/ Dryer Parts Refer to Page 3 for Model Numbers SWD441C_801998 www.alliancelaundry.com Part No. 801998R6 January 2018 Table of Contents Title Page Parts Ordering Information...

More information

WASHER/DRYER CONTROL PANEL PARTS

WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts W10356098 Installation Instructions W10343071 Guide, Use & Care W10364010 Wiring Diagram W10343084 Energy Guide 2 3390688

More information

Operating Instructions for the ProFormer TM Cabinet System Pressure and Suction

Operating Instructions for the ProFormer TM Cabinet System Pressure and Suction Operating Instructions for the ProFormer TM Cabinet System Pressure and Suction 2101 West Cabot Boulevard Langhorne, PA 19047-1893 w w w.empire-airblast.com Model Number: Serial Number: Date of Purchase:

More information

Homestyle Stacked Washer/Dryer

Homestyle Stacked Washer/Dryer Homestyle Stacked Washer/Dryer Parts Refer to Page 3 for Model Numbers SWD443C_801802 www.alliancelaundry.com Part No. 801802R8 January 2018 Table of Contents Title Page Parts Ordering Information...

More information

PS-3E AND PS-6E ELECTRIC CONVECTON STEAMERS PARTS AND SERVICE MANUAL

PS-3E AND PS-6E ELECTRIC CONVECTON STEAMERS PARTS AND SERVICE MANUAL PS-3E AND PS-6E ELECTRIC CONVECTON STEAMERS PARTS AND SERVICE MANUAL EFFECTIVE AUGUST 1, 2014 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the event that

More information

Electric Automatic Carpet Extractor. Operator and Parts Manual. Model No.: Rev. 00 (11-99)

Electric Automatic Carpet Extractor. Operator and Parts Manual. Model No.: Rev. 00 (11-99) 1520 Electric Automatic Carpet Extractor Model No.: 607649 Operator and Parts Manual TENNANT COMPANY Commercial Products 12875 RANSOM STREET HOLLAND MI 49424 U.S.A. FAX: 1 800 678 4240 CUSTOMER SERVICE:

More information

Homestyle Stacked Washer/Dryer

Homestyle Stacked Washer/Dryer Homestyle Stacked Washer/Dryer Parts Refer to Page 3 for Model Numbers SWD452C_802847 www.comlaundry.com Part No. 802847R8 August 2012 Table of Contents Title Page Parts Ordering Information... 2 Nameplate

More information

TOP AND CONSOLE PARTS

TOP AND CONSOLE PARTS TOP AND CONSOLE PARTS 27" ELECTRIC DRYER 6 12 Printed in U.S.A. (GG)(bay) 1 Part No. Rev. A TOP AND CONSOLE PARTS 1 Literature Parts W10392124 Installation, Diagnostic Guide W10388780 Guide, Use & Care

More information

99105A Series - F Brush Lift Assembly Model :99105A 20" EZ BD Floorkeeper (w/ 2-12 V Batteries) - Series F

99105A Series - F Brush Lift Assembly Model :99105A 20 EZ BD Floorkeeper (w/ 2-12 V Batteries) - Series F 9905A Series - F Brush Lift Assembly Model :9905A 0" EZ BD Floorkeeper (w/ - V Batteries) - Series F Page- 5 7 8 9 5 7 8 0 5 7 8 9 0 5 7 8 9 0 0589 NUT, LOCK W/ LOCTITE 070 RING, RETAINING 0 WASHER, PLAIN

More information

CABINET PARTS For Model: KSSS48QJX00 (Stainless Steel)

CABINET PARTS For Model: KSSS48QJX00 (Stainless Steel) CABINET PARTS 48" BUILT IN REFRIGERATOR 10 02 Litho In U.S.A. (mek) 1 Part No. 1 LITERATURE PARTS LIT2209249 Use & Care Guide LIT2006651 Energy Label LIT2006748 Service & Wiring Sheet LIT628370 Modular

More information

BNP 160 TUMBLE BASKET SUCTION BLAST CABINET O. M

BNP 160 TUMBLE BASKET SUCTION BLAST CABINET O. M BNP 160 TUMBLE BASKET SUCTION BLAST CABINET O. M. 25993 DATE OF ISSUE: 03/13 REVISION: Rev. A, 11/15 NOTICE TO PURCHASERS AND USERS OF OUR PRODUCTS AND THIS INFORMATIONAL MATERIAL Clemco proudly provides

More information

MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A

MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com

More information

EFFECTIVE: MAY, American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL. 900 Blake Street Edwardsville, Kansas (913) /08

EFFECTIVE: MAY, American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL. 900 Blake Street Edwardsville, Kansas (913) /08 EFFECTIVE: MAY, 2008 American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 021-0061 Model: ASQ Glasswasher American Dish Service

More information

WASHER/DRYER CONTROL PANEL PARTS

WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts 8542748 Installation Instructions 3406880 Use & Care Guide 3954159 Energy Guide 8542754 Sheet, Cycle Feature 3952874 Wiring

More information

WASHER/DRYER CONTROL PANEL PARTS For Model: MET3800TW2 (White)

WASHER/DRYER CONTROL PANEL PARTS For Model: MET3800TW2 (White) WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts W10222378 Installation Instructions W10196552 Use & Care Guide W10117755 Sheet, Cycle Feature W10114285 Wire Diagram 2 3390688

More information

AD-115ES Parts Manual

AD-115ES Parts Manual AD-115ES Parts Manual 24 VAC Phase 7 / S.A.F.E. System July 2002 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com

More information

WASHER/DRYER CONTROL PANEL PARTS For Models: LTE6234DQ5, LTE6234DT5 (Designer White) (Biscuit)

WASHER/DRYER CONTROL PANEL PARTS For Models: LTE6234DQ5, LTE6234DT5 (Designer White) (Biscuit) WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions 8577199 English 3397634 Arabic Use & Care Guide 8578179 English 3405528 Arabic 8542752 Sheet, Cycle

More information

ALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL

ALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL ALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL EFFECTIVE MAY, 0 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the event that items specified are

More information

ZERO Economy Blast Cabinets

ZERO Economy Blast Cabinets SIMPLE RELIABLE INDUSTRIAL CONSTRUCTION & FEATURES ZERO Economy Blast Cabinets ZERO economy blast cabinets are perfect for light use in auto shops, art studios, maintenance departments as well as in machine

More information

WASHER/DRYER CONTROL PANEL PARTS For Model: YWET3300SQ1 (Designer White)

WASHER/DRYER CONTROL PANEL PARTS For Model: YWET3300SQ1 (Designer White) WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions W10118289 English 8578179 English W10118304 Sheet, Cycle Feature W10117522 Wire Diagram 2 3390688

More information

WASHER/DRYER CONTROL PANEL PARTS For Model: YWET3300SQ0 (Designer White)

WASHER/DRYER CONTROL PANEL PARTS For Model: YWET3300SQ0 (Designer White) WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions W10118289 English 8578179 English W10118304 Sheet, Cycle Feature W10113806 Wire Diagram 2 3390688

More information

WASHER/DRYER CONTROL PANEL PARTS For Models: LTE6234DQ2, LTE6234DZ2, LTE6234DT2 (Designer White) (Designer Almond) (Biscuit)

WASHER/DRYER CONTROL PANEL PARTS For Models: LTE6234DQ2, LTE6234DZ2, LTE6234DT2 (Designer White) (Designer Almond) (Biscuit) WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions LIT3397616 English LIT3397634 Arabic Use & Care Guide LIT3401097 English LIT3405528 Arabic LIT8299786

More information

WASHER/DRYER CONTROL PANEL PARTS

WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts W10222387 Installation Instructions W10196553 Use & Care Guide W10293897 Energy Guide 8542754 Sheet, Cycle Feature 8576808

More information

MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B

MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com

More information

EFFECTIVE: MAY, American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL. 900 Blake Street Edwardsville, Kansas (913) /08

EFFECTIVE: MAY, American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL. 900 Blake Street Edwardsville, Kansas (913) /08 EFFECTIVE: MAY, 2014 American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 The American Dish Service part numbers contained in this

More information

WASHER/DRYER CONTROL PANEL PARTS For Model: WET3300SQ0 (Designer White)

WASHER/DRYER CONTROL PANEL PARTS For Model: WET3300SQ0 (Designer White) WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions W10118289 English 8578179 English W10118304 Sheet, Cycle Feature W10113806 Wire Diagram W10118487

More information

HDLV 55-Gallon Powder Drum Unloader

HDLV 55-Gallon Powder Drum Unloader Instruction Sheet P/N 07333 0 HDLV -Gallon Powder Drum Unloader Description See Figure. The HDLV -gallon powder drum unloader uses a Prodigy HDLV High Capacity pump to supply virgin powder to a powder

More information

Superior Performance

Superior Performance Suction - Series Manual Blast Cabinets Superior Performance And Quality In Blast Cleaning Equipment S-Series Owners Manual Ph: (780) 466-5085 www.modublast.com Fax: (780) 465-7317 MOD-U-BLAST WARRANTY

More information

ML-96 Parts Manual. Phase 7

ML-96 Parts Manual. Phase 7 ML-96 Parts Manual Phase 7 2001 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com www.amdry.com ADC Part

More information

general brochure The reference in sandblasting

general brochure The reference in sandblasting industrial SANDBLASTING CABINETS M SERIES Industrial M Series Sandblasting Cabinets are the most powerful and sophisticated cabinets available on the market today. Built with strong 12-gage steel and equipped

More information

PACER 30 VACUUM IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING MACHINE

PACER 30 VACUUM IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING MACHINE DANGER! PACER 30 VACUUM IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING MACHINE Failure to Observe These Instructions Can Cause Fire, Electrical Burn, Shock

More information

KSSS42QDW05, KSSS42QDX05

KSSS42QDW05, KSSS42QDX05 CABINET PARTS 42" BUILT IN REFRIGERATOR 4 97 Litho In U.S.A. (mek) 1 Part No. CABINET PARTS 1 Cabinet (Not A Serviceable Part) 3 2005004 Grommet, Tube Crossover 4 1112023 Roller, Front & Rear (4) 5 Support,

More information

Repair Parts List DRYER MODEL NUMBER MDG30PN3AW. When requesting service or ordering parts, always provide the following information:

Repair Parts List DRYER MODEL NUMBER MDG30PN3AW. When requesting service or ordering parts, always provide the following information: Repair Parts List DRYER MODEL NUMBER MDG30PN3AW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005

More information

PARTS MANUAL. American Dish Service MODEL: 5-AG-S ADS LOW TEMPERATURE DISHWASHER EFFECTIVE: JULY, 2013 C 4/08

PARTS MANUAL. American Dish Service MODEL: 5-AG-S ADS LOW TEMPERATURE DISHWASHER EFFECTIVE: JULY, 2013 C 4/08 EFFECTIVE: JULY, 2013 ADS LOW TEMPERATURE DISHWASHER MODEL: PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 C 4/08 The American Dish Service part numbers contained in this publication

More information

FRAME AND CONSOLE PARTS

FRAME AND CONSOLE PARTS FRAME AND CONSOLE PARTS UNDERCOUNTER DISHWASHER 1 3375275 Console (Includes Item 2) 2 3376026 Insert, Console 3 3376029 Switch, 5 Pushbutton 4 3369529 Follower, Cam 5 3373626 Timer 6 3369415 Cam 7 304231

More information

FRAME AND CONSOLE PARTS

FRAME AND CONSOLE PARTS FRAME AND CONSOLE PARTS UNDERCOUNTER DISHWASHER 1 3375271 Console (Includes Item 2) 2 3374798 Insert, Console 3 3376446 Switch 4 3369529 Follower, Cam 5 3375079 Timer 6 3375140 Cam 7 304231 Screw, 8 16

More information

Exploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base

Exploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base 22 Exploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base Parts List - Model J-7020M/J-7040M Miter Cut-off Saw Base 1 J-5507591 Base, Machine 1 1-1 5512197 Plug, Drain (3/8in, PT) 2 5507592 Screw,

More information

ADG-531HS Hot Surface Ignition

ADG-531HS Hot Surface Ignition ADG-531HS Hot Surface Ignition Parts Manual 1998 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9010 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com 120997JEV/abe

More information

The reference in sandblasting. SANDBLASTING CABINETS M SERIE pressure TYPE. general brochure

The reference in sandblasting. SANDBLASTING CABINETS M SERIE pressure TYPE. general brochure SANDBLASTING CABINETS M SERIE pressure TYPE general brochure Specially designed to increase productivity, the pressure type cabinet will be the answer to all your needs. It will give you fast results with

More information

Replacement Parts List For Models COS-20G

Replacement Parts List For Models COS-20G Replacement Parts List For Models COS-20G (Ovens with s/n HP & HT) Contents: Page # Electrical Compartment:Contactors,Steam Generator,Thermostats 2-5 Oven Interior: 5 Bottom Section: Gas, Plumbing Components

More information

27" Gas Dryer MODELS: MGDB950YW3 (White) MGDB950YG3 (Cosmetallic) 05/31/ Maytag Part No. W Rev. A

27 Gas Dryer MODELS: MGDB950YW3 (White) MGDB950YG3 (Cosmetallic) 05/31/ Maytag Part No. W Rev. A 27" Gas Dryer MODELS: MGDB950YW3 (White) MGDB950YG3 (Cosmetallic) 05/31/2013 2013 Maytag Part W10617393 Rev. A TOP AND CONSOLE PARTS 05/31/2013 2 Part W10617393 Rev. A TOP AND CONSOLE PARTS Part Description

More information

Repair Parts List DISHWASHER MODEL NUMBER DU471. When requesting service or ordering parts, always provide the following information:

Repair Parts List DISHWASHER MODEL NUMBER DU471. When requesting service or ordering parts, always provide the following information: Repair Parts List DISHWASHER MODEL NUMBER DU471 When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005

More information

SUPERIOR PERFORMANCE

SUPERIOR PERFORMANCE Economy (E) Series Blast Cabinet Owner s Manual SUPERIOR PERFORMANCE And Quality In Blast Cleaning Equipment! WARNING READ MANUAL Failure to read, understand & follow all safety and operation procedures

More information

ML-758 Parts Manual. Phase 7 / Non-Coin / Dual Timer with F.S.S. Options

ML-758 Parts Manual. Phase 7 / Non-Coin / Dual Timer with F.S.S. Options ML-758 Parts Manual Phase 7 / Non-Coin / Dual Timer with F.S.S. Options American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com

More information

UNDERCOUNTER DISHWASHER

UNDERCOUNTER DISHWASHER CORPORATION UNDERCOUNTER DISHWASHER MODEL DU8500XX3 Almond/Black 7 92 Litho In U.S.A. c 1992 WHIRLPOOL CORPORATION Part No. FRAME AND CONSOLE PARTS 1 3370310 Console (Includes Item 2) 2 3370309 Insert,

More information

AD-360X2 Parts Manual

AD-360X2 Parts Manual AD-360X2 Parts Manual Phase 7 American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA Telephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447 e-mail: techsupport@amdry.com www.adclaundry.com

More information

BLAST-IT-ALL BUMPER BLASTER

BLAST-IT-ALL BUMPER BLASTER LARRY HESS AND ASSOCIATES, INC 185 PIPER LANE / SALISBURY, NC 28147 PHONE: 1-800-535-2612 / FAX: 1-704-638-9311 WWW.BLAST-IT-ALL.COM BLAST-IT-ALL BUMPER BLASTER SUCTION BLAST CABINET NOTE: It is the responsibility

More information

PARTS MANUAL. American Dish Service ADS CONVEYOR DISHWASHER MODELS: ADC-66 L-R/R-L EFFECTIVE: MAY, 2014

PARTS MANUAL. American Dish Service ADS CONVEYOR DISHWASHER MODELS: ADC-66 L-R/R-L EFFECTIVE: MAY, 2014 EFFECTIVE: MAY, 2014 ADS CONVEYOR DISHWASHER MODELS: ADC-66 L-R/R-L PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 The American Dish Service part numbers contained in this

More information

ALG181J6 TAMBOR (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P)

ALG181J6 TAMBOR (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) ALG181J6 TAMBOR ALG181J6 TAMBOR 1 131084710 PANEL LELF SIDE WHITE (S/P) 1 131084701 PANEL LELF SIDE ALMOND (S/P) 2 131168200 SCREW (S/P) 3 131883301 PANEL (S/P) 4 134799902 PANEL REAR (S/P) 5 5303281019

More information

ES-5050 / ES5050TE Parts Manual

ES-5050 / ES5050TE Parts Manual ES-5050 / ES5050TE Parts Manual Phase 8 American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA Telephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447 e-mail: techsupport@amdry.com www.adclaundry.com

More information

CABINET PARTS REFRIGERATOR

CABINET PARTS REFRIGERATOR CABINET PARTS REFRIGERATOR 1 94 Litho In U.S.A. 1 Part No. CABINET PARTS 2 2152011 Front Roller (2) 3 489393 Screw, 4 981122 Roller (Rear) (2) 5 488454 Screw 6 2155013 Clip, Grille 7 489242 Screw 9 836196

More information

Repair Parts List DRYER MODEL NUMBER MDG30MNAWW. When requesting service or ordering parts, always provide the following information:

Repair Parts List DRYER MODEL NUMBER MDG30MNAWW. When requesting service or ordering parts, always provide the following information: Repair Parts List DRYER MODEL NUMBER MDG30MNAWW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS CE SERIES ELECTRIC COMBI OVENS ML-138010 ML-138011 ML-138012 ML-138013 ML-138016 ML-138017 ML-138014 ML-138015 ML-138018 ML-138019 CE6HD (Left) CE6HD (Right) CE10HD (Left)

More information

CMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts.

CMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts. CMA Dishmachines 1700 Knott Avenue Garden Grove, CA 981 Toll Free: 1- (800) 8-617 Fax: 1- (71) 89-11 Service Replacement Parts Undercounter High Temperature Dishwasher Model: UC6e M Machine Serial No.

More information

general brochure

general brochure industrial sandblasting cabinets ISTblast offers a complete line of superior quality industrial sandblasting cabinets designed to accomplish any light to heavy-duty sandblasting jobs. All our cabinets

More information

CABINET PARTS For Model: ED5GTGXNQ14, ED5GTGXNB14 (White) (Black)

CABINET PARTS For Model: ED5GTGXNQ14, ED5GTGXNB14 (White) (Black) CABINET PARTS REFRIGERATOR 07 07 Litho In U.S.A. (mat) 1 Part No. Rev. A CABINET PARTS 1 Literature Parts 2315254 Use & Care Guide 2255373 Service & Wiring Sheet 2318639 Energy Guide 628370 Modular Icemaker

More information

OWNERS MANUAL DCM 161 MINI TUMBLE BLAST CABINET

OWNERS MANUAL DCM 161 MINI TUMBLE BLAST CABINET OWNERS MANUAL DCM 161 MINI TUMBLE BLAST CABINET Clemco International GmbH Carl-Zeiss-Straße 21 Tel.: +49 (0) 8062 90080 83052 Bruckmühl Mail: info@clemco.de Germany Web: www.clemco-international.com Revision:

More information

Effective october 14, 2014

Effective october 14, 2014 COS-20G combi oven-steamer REPLACEMENT PARTS LIST Effective october 14, 2014 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the event that items specified

More information

MK-100 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:

MK-100 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER: MK-00 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space

More information

Model: FT110 Dishwasher

Model: FT110 Dishwasher PARTS MANUAL HOBART FOOD EQUIPMENT CO., LTD Model: FT110 Dishwasher HOBART FOOD EQUIPMENT CO., LTD 2003-07-10 Table of Contents Page Description 2 Panels, Upper chamber and Tank 4 Control Box 6 Control

More information

ML-82 Parts Manual. Phase 7 Microprocessor with F.S.S. Options

ML-82 Parts Manual. Phase 7 Microprocessor with F.S.S. Options ML-82 Parts Manual Phase 7 Microprocessor with F.S.S. Options American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com

More information

PARTS MANUAL. American Dish Service ADS LOW-WATER DISHWASHER MODELS: L3DW / L3DWC EFFECTIVE: MAY, 2008

PARTS MANUAL. American Dish Service ADS LOW-WATER DISHWASHER MODELS: L3DW / L3DWC EFFECTIVE: MAY, 2008 EFFECTIVE: MAY, 2008 ADS LOW-WATER DISHWASHER MODELS: L3DW / L3DWC PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 The part numbers contained in this publication are replacement

More information

TC 222 TIRE CHANGER SPARE PART LIST 01

TC 222 TIRE CHANGER SPARE PART LIST 01 TC 222 TIRE CHANGER SPARE PART LIST 0 No. on Part No. Name Qua. Spec. 699000736 Vertical arm 2 699000737 Hex shaft, vertical arm 3A 699000725 Assembly - locking cylinder 4 699000738 Lock plate horizontal

More information

ML-75 Parts Manual. Dual Timer / Phase 7 Non-Coin with F.S.S. Options Through June 2002

ML-75 Parts Manual. Dual Timer / Phase 7 Non-Coin with F.S.S. Options Through June 2002 ML-75 Parts Manual Dual Timer / Phase 7 Non-Coin with F.S.S. Options Through June 2002 American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA Telephone: +1 (508) 678-9000 / Fax: +1 (508)

More information

CABINET PARTS For Models: ED25UEXHW01, ED25UEXHT01 (White) (Biscuit)

CABINET PARTS For Models: ED25UEXHW01, ED25UEXHT01 (White) (Biscuit) CABINET PARTS REFRIGERATOR 9 00 Litho In U.S.A. (dmz) 1 Part No. CABINET PARTS 1 LIT2205958 Use & Care Guide LIT2204338 Service & Wiring Sheet LIT2211832 Energy Guide LIT628370 Modular Icemaker Service

More information

model NO. LSS GALLON SKID MOUNTED HIGH PRESSURE SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS

model NO. LSS GALLON SKID MOUNTED HIGH PRESSURE SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS 000 model NO. LSS- 00 GALLON SKID MOUNTED HIGH PRESSURE SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS Part number and descriptions can be obtained from the illustrated parts list section of this manual.

More information

TOP AND CONSOLE PARTS For Models: LGQ9858PW0, LGQ9858PG0 (White/Grey) (Biscuit/Gold)

TOP AND CONSOLE PARTS For Models: LGQ9858PW0, LGQ9858PG0 (White/Grey) (Biscuit/Gold) TOP AND CONSOLE PARTS 29"GAS DRYER 5 04 Litho in U.S.A. (djc) 1 Part No. 1 Literature Parts LIT8535830 Instructions, Installation LIT8533770 Sheet, Cycle Feature LIT8522243 Use & Care Guide LIT3406661

More information

Hakki Pilke Raven spare parts manual

Hakki Pilke Raven spare parts manual 1 ENGLISH Hakki Pilke Raven spare parts manual Valimotie 1, FI-85800 Haapajärvi, FINLAND Tel. +358 8 772 7300, Fax +358 8 772 732 info@maaselankone.fi, www.maaselankone.fi 2 Table of contents 1 Upper section

More information

CUTMASTER Strip Cutting Machine

CUTMASTER Strip Cutting Machine EASTMAN THE EASTMAN CUTMASTER Strip Cutting Machine WARNING Safety glasses must be worn at all times when operating or servicing this equipment. Instruction Manual & Illustrated Parts List Please read

More information

COMMERCIAL STACKED. Supersedes repair parts list located behind lower panel on washer. Models: CGT8000AQ1 (White)

COMMERCIAL STACKED. Supersedes repair parts list located behind lower panel on washer. Models: CGT8000AQ1 (White) PARTS LIST for COMMERCIAL STACKED Supersedes repair parts list located behind lower panel on washer Models: CGT8000AQ1 (White) FOR CUSTOMER SATISFACTION ALWAYS USE FACTORY SPECIFICATION PARTS 201210001

More information

Revised 9/05. Model X-750 Subassembly Parts List

Revised 9/05. Model X-750 Subassembly Parts List Revised /0 Model Subassembly Parts List Blade Belt Tensioner 0 PART NUMBER DESCRIPTION QTY. -G0-0-0 SHSB, / x / -G0-0-0 SHSB, / x / -X-0-00 Arm, Belt Tensioner -G0-0-00 Washer, Flat /" -0-0-0 Washer, Split

More information

COMMERCIAL ELECTRIC DRYER

COMMERCIAL ELECTRIC DRYER COMMERCIAL ELECTRIC DRYER MODEL MLE24PNAGW0 7 09 Litho in U.S.A. (BT)(bay) c 2009 WHIRLPOOL CORPORATION Part No. Rev. A LOWER CABINET AND FRONT PANEL PARTS 2 LOWER CABINET AND FRONT PANEL PARTS 1 Literature

More information

Repair Parts List REFRIGERATOR MODEL NUMBER GC20B8C3EB. When requesting service or ordering parts, always provide the following information:

Repair Parts List REFRIGERATOR MODEL NUMBER GC20B8C3EB. When requesting service or ordering parts, always provide the following information: Repair Parts List REFRIGERATOR MODEL NUMBER GC20B8C3EB When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description

More information

Dirt Dragon. Operator and Parts Manual WOOD FLOOR CLEANING MACHINE

Dirt Dragon. Operator and Parts Manual WOOD FLOOR CLEANING MACHINE Dirt Dragon WOOD FLOOR CLEANING MACHINE Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 800-441-1934 Fax: 800-942-2007 Technical Service: 877-856-5954 www.basicoatings.com

More information

American Dryer Corporation

American Dryer Corporation ML-190 Parts Manual 2001 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com www.amdry.com ADC Part No. 450409-6

More information

VENTURI AIR SPRAYERS

VENTURI AIR SPRAYERS VENTURI AIR SPRAYERS Parts Manual For Model P45N1-400-G 3-Point Mount Form: P45N400GBookRev2012.indd June 2012 (Rev.) TABLE OF CONTENTS SECTION DESCRIPTION... PAGE 1 Introduction... 1 1.1 Purchaser s Responsibility...

More information

Front Roller (2) Screw Roller (Rear) (2) Screw Clip, Grille Screw Shim

Front Roller (2) Screw Roller (Rear) (2) Screw Clip, Grille Screw Shim 2 2174748 Front Roller (2) 3 489456 Screw 4 981122 Roller (Rear) (2) 5 489427 Screw 6 2155013 Clip, Grille 7 489478 Screw 9 2156056 Shim 12 2196046 Hinge Top (2) 13 2196048 Shim, Hinge Top 14 489284 Screw

More information

AD-330 / AD-320 Parts Manual Phase 7 Coin with S.A.F.E. System Option

AD-330 / AD-320 Parts Manual Phase 7 Coin with S.A.F.E. System Option AD-330 / AD-320 Parts Manual Phase 7 Coin with S.A.F.E. System Option American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA Telephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447 e-mail:

More information

29" GAS DRYER MODELS: MGD7000AW1 (White) MGD7000AG1 (Cosmetallic) 07/02/ Maytag Part No. W Rev. A

29 GAS DRYER MODELS: MGD7000AW1 (White) MGD7000AG1 (Cosmetallic) 07/02/ Maytag Part No. W Rev. A 29" GAS DRYER MODELS: MGD7000AW1 (White) MGD7000AG1 (Cosmetallic) 07/02/2013 2013 Maytag Part W10624907 Rev. A TOP AND CONSOLE PARTS 07/02/2013 2 Part W10624907 Rev. A TOP AND CONSOLE PARTS Part Description

More information

REPLACEMENT PARTS MANUAL

REPLACEMENT PARTS MANUAL PREC SION Water Systems REPLACEMENT PARTS MANUAL FOR MODEL: PWS 8-8(120VAC), PWS 8-8(240VAC), AED-1(120VAC), AED-1(240VAC), APK-1(120VAC) & APK-1(240VAC) PART # 500003 500014 500006 500015 500007 500016

More information

27" GAS DRYER MODELS: 7MWGD87HEDC0 (Chrome Shadow) 08/19/ Whirlpool Corporation Part No. W Rev. A

27 GAS DRYER MODELS: 7MWGD87HEDC0 (Chrome Shadow) 08/19/ Whirlpool Corporation Part No. W Rev. A 27" GAS DRYER MODELS: 7MWGD87HEDC0 (Chrome Shadow) 08/19/2014 2014 Whirlpool Corporation Part W10738517 Rev. A TOP AND CONSOLE PARTS 08/19/2014 2 Part W10738517 Rev. A TOP AND CONSOLE PARTS 1 Literature

More information

NHR-25 Feed Hopper with Agitator

NHR-25 Feed Hopper with Agitator Instruction Sheet P/N 0920-02 Description This instruction sheet provides specifications, installation instructions, and parts lists for the NHR-25 Powder Feed Hopper with Agitator. This hopper is used

More information

ML-78 Parts Manual. ADC Part No

ML-78 Parts Manual. ADC Part No ML-78 Parts Manual American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com ADC Part No. 450181 Retain This Manual

More information

CABINET PARTS For Models: 7GS2SHEXPQ03, 7GS2SHEXPL03 (White) (Stainless VCM) REFRIGERATOR

CABINET PARTS For Models: 7GS2SHEXPQ03, 7GS2SHEXPL03 (White) (Stainless VCM) REFRIGERATOR CABINET PARTS REFRIGERATOR 03 07 Litho In U.S.A. (mat) 1 Part No. Rev A CABINET PARTS 1 Literature Parts 2261383 Use & Care Guide 2255955 Service & Wiring Sheet 2261377 Energy Guide 2220407 Modular Icemaker

More information