BUNN CWT CWTF CWTF-MV

Transcription

1 BUNN CWT CWTF CWTF-MV ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 37 SPRINGFIELD, ILLINOIS PHONE: (7) FAX: (7) /0 995 Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: ) All equipment other than as specified below: years parts and year labor. ) Electronic circuit and/or control boards: parts and labor for 3 years. 3) Compressors on refrigeration equipment: 5 years parts and year labor. ) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer ) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (7) or by writing to Post Office Box 37, Springfield, Illinois ; ) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either ) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or ) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages

3 TABLE OF CONTENTS Electrical and Operating Controls Faucet and Tubing...8 Fill Basin... Funnels and Filter Basket Hood and Top Covers - SST and Black Decor Models... 0 Hood and Top Covers - Brass Models... Numerical Index... 0 External Strainer, Flow Control, Solenoid and Lines... Internal Strainer, Flow Control, Solenoid and Lines... 6 Tank and Components (Without Faucet)...6 Tank and Components (With Faucet)... 8 Tank and Components (Model CWTF-MV)...0 Trunks and Panels - SST and Black Decor Models (One warmer base)... Trunks and Panels - SST and Black Decor Models (Two warmer base)...8 Trunk and Panels - Brass Models... 6 Warmer Assemblies

4 BUNN TRUNKS AND PANELS - SST AND BLACK DECOR MODELS W/ONE WARMER BASE CWT CWTF CWTF-MV Models 9 Brewers with Black Decor CAUTION : WARMERS AND SURFACES ARE HOT 7 8 Optional Legs 9 P

5 TRUNKS AND PANELS - SST AND BLACK DECOR MODELS W/ONE WARMER BASE ITEM PART NO. QTY. DESCRIPTION Trunk W/Decals BLK Vinyl (Includes Items 6, 7, 8 & 0) Trunk W/Decals BLK Painted (Includes Items 6, 7, 8 & 0) Trunk W/Decals SST (Includes items 6, 7, 8 & 0) Trunk W/Decals SST (Includes items 6, 7, 8 & 0)(CWTF-MV Models) Trunk W/Decals SST (Includes items 6, 7 & 8) (Models W/O Warmers) Panel W/Decals, Trunk - BLK Vinyl (Includes items 3 & ) Panel W/Decals, Trunk - BLK Painted (Includes items 3 & ) Panel W/Decals, Trunk - SST (Includes items 3 & ) Panel W/Decals, Trunk - BLK Vinyl (Includes item 3)( A & B Models) Panel W/Decals, Trunk - BLK Painted (Includes item 3)( A & B Models) Panel W/Decals, Trunk - SST (Includes item 3)( A & B Models) Panel W/Decals, Trunk - SST (Includes items 3, & )(CWTF-MV Models) Panel W/Decals, Trunk - SST (Includes items 3 & ) (Models W/O Warmers) Screw, Truss Head SST #6-3 x Screw, Truss Head BLK #6-3 x Fastener, U-Type # Decal, Caution - Decanter/Funnel Schematic, Electrical 0V & 0V/0V Schematic, Electrical 0V/0V (CWTF-MV Models) Schematic, Electrical 0V/0V (Models W/O Warmers) Housing W/Decals, Base SST (Includes items 6 & 7) Housing W/Decals, Base BLK (Includes items 6 & 7) Housing W/Decals, Base ( A Models)(Includes items 6 & 7) Housing W/Decals, Base SST (Includes item 7) (Models W/O Warmers) Screw, Pan Head #8-3 x Decal, Caution - Warmers And Surfaces Are Hot Decal, Decorative Stripe Cover, Base Screw, Hex-Crimptite #6 x Foot, Rubber Leg, Adjustable Satin Nickel Pad, Anti-Skid, Rubber (.5 Dia.) Leg, Adjustable BLK (Order item 3) Pad, Anti-Skid, Rubber (.70 Dia.) (Order item 3) Bushing, Snap Dia. ( A Models only) Bushing, Snap.5 Dia Decal, Warning - Electrical Decal, Comply To Plumbing Code Decal, Flow Control/Strainer( Brewers W/External Flow Control and Faucet) Angle, Reinforcement Screw, Flat Head #6-3 x Nut, Keps # Plug, Hole -.37 Hole Dia (Brewers W/Out Faucet) Decal - Optional Field Wiring Decal, Batch Set (Digital Timer) (Late models) Leg Kit (Includes items & 3) Optional Equipment Early Model Brewers with Black Decor and Screw on Angle

6 BUNN TRUNKS AND PANELS - BRASS MODELS W/ONE WARMER BASE CWT CWTF DISCARD DECANTER IF: 985 BUNN-O-MATIC CORPORATION 3 FUNNEL CONTENTS ARE HOT PN: 658 CRACKED SCRATCHED BOILED DRY HEATED WHEN EMPTY USED ON HIGH FLAME. OR EXPOSED ELECTRIC ELEMENTS CAUTION : WARMERS AND SURFACES ARE HOT P

7 TRUNKS AND PANELS - BRASS MODELS W/ONE WARMER BASE ITEM PART NO. QTY. DESCRIPTION Trunk W/Decals (Includes Items, 5, 6, 8) Panel W/Decals, Trunk (Includes items 3 & ) Screw, Truss Head #6-3 x Fastener, J-Type # Decal, Caution - Decanter/Funnel Schematic, Electrical 0V & 0V/0V Housing W/Decals, Base (Includes items 6 & 7) Screw, Pan Head - Serrated #8-3 x Decal, Caution - Warmers And Surfaces Are Hot Decal, Decorative Stripe Cover, Base Screw, Truss Head-Serrated #6-3 x Fastener, J-Type # Channel, Base Support - Left Channel, Base Support - Right Plate, Base Support Screw, Pan Head - Serrated #8-3 x Nut, Keps # Plug, Vent Dia Foot, Rubber Screw, Pan Head - Serrated #8-3 x Bushing, Snap.5 Dia Decal, Warning - Electrical Decal, Comply To Plumbing Code Decal, Flow Control/Strainer Angle, Reinforcement Plug, Hole -.37 Hole Dia (Brewers W/Out Faucet)

8 BUNN TRUNKS AND PANELS - BREWERS W/TWO WARMER BASE CWT CWTF CWTF-MV Models 9 Brewers With Black Decore CAUTION : WARMERS AND SURFACES ARE HOT CAUTION : WARMERS AND SURFACES ARE HOT Optional Legs 9 P

9 TRUNKS AND PANELS - BREWERS W/TWO WARMER BASE ITEM PART NO. QTY. DESCRIPTION Trunk W/Decals BLK Vinyl (Includes Items 6, 7, 8 & 0) Trunk W/Decals BLK Painted (Includes Items 6, 7, 8 & 0) Trunk W/Decals BLK Coated - No Receptacle (Includes Items 6, 7 & 8) Trunk W/Decals SST (Includes items 6, 7, 8 & 0) Trunk W/Decals SST (Includes items 6, 7 & 8) (CWTF-MV Models) Panel W/Decals, Trunk - BLK Vinyl (Includes items 3 & ) Panel W/Decals, Trunk - BLK Painted (Includes items 3 & ) Panel W/Decals, Trunk - BLK Coated (Includes items 3, & 3) Panel W/Decals, Trunk - SST (Includes items 3 & ) Panel W/Decals, Trunk - SST (Includes items 3, & )(CWTF-MV Models) Panel W/Decals, Trunk - BLK Vinyl (Includes item 3)( A & B Models) Panel W/Decals, Trunk - BLK Painted (Includes item 3)( A & B Models) Panel W/Decals, Trunk - SST (Includes item 3)( A & B Models) Screw, Truss Head SST #6-3 x Screw, Truss Head BLK #6-3 x Fastener, U-Type # Decal, Caution - Decanter/Funnel Schematic, Electrical 0V & 0V/0V Schematic, Electrical 0V/0V (CWTF-MV Models) Housing W/Decals, Base SST (Includes items 6 & 7) Housing W/Decals, Base BLK (Includes items 6 & 7) Housing W/Decals, Base ( A Models)(Includes items 6 & 7) Screw, Pan Head #8-3 x Decal, Caution - Warmers And Surfaces Are Hot Decal, Decorative Stripe Cover, Base Screw, Hex-Crimptite #6 x.38 (Eight less used on late Models) Foot, Rubber Leg, Adjustable Satin Nickel Pad, Anti-Skid, Rubber (.5 Dia.) Leg, Adjustable BLK Pad, Anti-Skid, Rubber (.70 Dia.) Bushing, Snap Dia Bushing, Snap.5 Dia Decal, Warning - Electrical Decal, Comply To Plumbing Code Decal, Flow Control/Strainer( Brewers W/External Flow Control and Faucet) Angle, Reinforcement Screw, Flat Head #6-3 x Nut, Keps # Plug, Hole -.37 I.D. (Brewers W/Out Faucet) Housing W/Decal, Side Warmer (Includes Item 6) Housing, BLK W/Decal, Side Warmer (Includes Item 6) Decal, Optional Field Wiring (Brewers withthree lower warmers) (CWTF-MV models) Decal, Batch Set (Digital Timer) (Late models) Brewers with Black Decor

10 BUNN HOOD AND TOP COVERS - SST AND BLACK DECOR MODELS CWT CWTF 3 6 3! CAUTION WARMERS AND SURFACES ARE HOT ! CAUTION WARMERS AND SURFACES ARE HOT 5 7 6! CAUTION WARMERS AND SURFACES ARE HOT P

11 HOOD AND TOP COVERS - SST AND BLACK DECOR MODELS ITEM PART NO. QTY. DESCRIPTION Plug, Hole.9" Dia. (Early Models) Cover, Top Cover W/Decal, Top (Brewers W/Three Lower Warmers)(Includes item 3) Cover W/Decal, Top (Brewers W/Three Lower Warmers)(Includes item 8)(CWTF- MV Models) Cover w/decal, Top (Brewers w/one Top Warmer/Rear) (Includes items & 6) Cover w/decal, Top (Brewers w/one Top Warmer/Front) (Includes items & 6) Cover w/decal, Top SST (Brewers w/two Top Warmers) (Includes items & 6) Cover w/decal, Top BLK (Brewers w/two Top Warmers) (Includes items & 6) Cover w/decal, Top (Brewers w/two Top Warmers) (Includes items,6 & 8)(CWTF- MV Models) Screw, Pan Head #-0 x.50" Fastener, J-Type # Lid, Pour-In - SST Lid, Pour-In - BLK Screw, Thumb #8-3 x.75" Fastener, J-Type # Decal, Caution - Warmers and Surfaces Are Hot Housing, Hood SST (For Brewers with 7.5" Dia Funnel) Housing, Hood BLK (For Brewers with 7.5" Dia Funnel) Housing, Hood (For Brewers with 7.65" Dia Funnel) Screw, Pan Head #8-3 x.38" Bushing, Snap.88" Dia Bushing, Snap.0" Dia Panel, Rear Top Warmer Screw, Truss Head 8-3 x.375" Decal, Wiring Conversion (CWTF-MV Models)

12 BUNN HOOD AND TOP COVERS - BRASS MODELS CWT CWTF 3! CAUTION WARMERS AND SURFACES ARE HOT P

13 ITEM PART NO. QTY. DESCRIPTION HOOD AND TOP COVERS - BRASS MODELS Cover Assembly, Top (Includes items thru 5, ten #8-3 Keps Nuts and one #8-3 J-Type Fastener) Housing W/Decal, Warmer (Includes item 3) Nut, Keps # Decal, Caution - Warmers and Surfaces Are Hot Bushing, Snap.0 Dia Cover Assembly, Top (Includes item, ten #8-3 Keps Nuts and one #8-3 J-Type Fastener) Screw, Pan Head #-0 x.50" Fastener, J-Type # Lid, Pour-In Screw, Truss Head - BLK #8-3 x, Fastener, J-Type # Bracket, Tank Mounting Screw, Pan Head - Serrated #8-3 x Panel Screw, Pan Head - Serrated #8-3 x Housing, Hood Screw, Pan Head - Serrated #8-3 x.375" Rail, Funnel - Left Rail, Funnel - Right Nut, Keps #

14 BUNN FILL BASIN CWT CWTF P

15 FILL BASIN ITEM PART NO. QTY. DESCRIPTION Plate, Splash Guard Fitting, Tank Inlet (Early Models) Fill Basin Gasket, Tank Inlet Solenoid Assembly (See STRAINER-FLOW CONTROL, SOLENOID & LINES) Tube Assembly, Solenoid To Fill Basin (Includes item 7 thru ) Grommet, Basin (See Item 6) Clamp, Hose-Snap (See Item 6) Fitting,.5 Barb x. MPT (See Item 6) Tube, Fill Basin (See Item 6) Tube, Silicone - 36" lg (Cut to.5") (See Item 6) Fitting Tube, Silicone.33" I.D. x.0" (Order item ) Tube, Silicone.33" I.D. x.0" (Cut to required length)

16 BUNN TANK AND COMPONENTS W/OUT FAUCET CWT CWTF P

17 ITEM PART NO. QTY. DESCRIPTION TANK AND COMPONENTS W/OUT FAUCET Tank Assy, 30W 0V (Includes items thru ) Tank Assy, 800W 0V (Includes items thru ) Tank Assy, 3500W 0/0V (Includes items thru ) Tank Assy, 850W 0V (Includes items thru ) Tank Assy, 3500W 0V (Includes items thru ) Screw, Truss Head #8-3 x.3/ Fastener, J-Type #8-3 Not Available. Order Components Tank W/Blanket Warmer, 0V Tank W/Blanket Warmer, 0V Includes items & Tank Blanket Warmer, 50W 0V Blanket Warmer, 50W 0V Gasket, Tank Lid Tank Lid Weldment Nut, Hex # Nut, Hex.50" Thermostat, Limit Gasket, Tank Heater Tank Heater, 30W 0V Tank Heater, 800W 0V Tank Heater, 850W 0V Tank Heater, 3500W 00V Tank Heater, 3500W 0V Includes item Lead, Electrical BLK (Thermostat to Heater) Lead, Electrical BLU(Thermostat to Limit) Sprayhead Tube Kit (Includes 3 mounting nuts below & items 3 & ) Nut, Hex # Gasket, Sprayhead Tube Hub, Syphon Wiring Harness, Heater/Limit to Main Harness 0V Wiring Harness, Heater/Limit to Main Harness 0/0V Wiring Harness, Heater/Limit to Main Harness 00V & 0V Used on Brewers prior to April 995. Not Illustrated Nut, Hex.38" Sprayhead, 6-Hole Sprayhead, 5-Hole ( A Models Only-Optional) Sprayhead, -Hole (Brewers with Pouch-Pack Funnel) Thermostat Leads (See Electrical and Operating Controls)

18 BUNN TANK AND COMPONENTS W/FAUCET CWT CWTF P

19 ITEM PART NO. QTY. DESCRIPTION Tank Assy, 30W 0V (Includes items thru 9) Tank Assy, 800W 0V (Includes items thru 9) Tank Assy, 3500W 0V (Includes items thru 9) Tank Assy, 850W 0V (Includes items thru 9) Tank Assy, 3500W 0V (Includes items thru 9) Screw, Truss Head #8-3 x Fastener, J-Type # Tank W/Blanket Warmer, 0V Tank W/Blanket Warmer, 0V Tank Blanket Warmer, 50W 0V Blanket Warmer, 50W 0V Gasket, Tank Lid Tank Lid Weldment Nut, Hex # Elbow, Male.50" Flare x.5" MPT Nut, Hex Brass.56"- (Water Coil) Gasket, Water Coil Coil Assy, Hot Water (Includes item 8) Thermostat, Limit Nut, Hex.50"-0 (Tank Heater) Gasket, Tank Heater Tank Heater, 30W 0V Tank Heater, 800W 0V Tank Heater, 850W 0V Tank Heater, 3500W 0V Tank Heater, 3500W 00V Thermal Safety Fuse (Thermostat to Heater) Lead, Electrical BLU (Thermostat to Limit) Sprayhead Tube Kit (Includes 3 mounting nuts below & items 0 & ) Nut, Hex # Gasket, Sprayhead tube Hub, Syphon Wiring Harness, Heater/Limit to Main Harness 0V Wiring Harness, Heater/Limit to Main Harness0V/0V Wiring Harness, Heater/Limit to Main Harness 00V & 0V Nut, Hex.38-0 TANK AND COMPONENTS W/FAUCET Includes items & 3 Includes item Sprayhead, 6-Hole Sprayhead, 5-Hole ( A Models Only-Optional) Sprayhead, -Hole (Brewers With Pouch-Pack Funnel) Thermostat Leads (See Electrical and Operating Controls) Not Available. Order Components. Used on Brewers prior to April 995. Not Illustrated

20 BUNN TANK & COMPONENTS CWTF-MV 6 5 CWT CWTF P

21 ITEM PART NO. QTY. DESCRIPTION Tank Assy, 30W/800W 0V/0V (Includes items thru 9)(Not Available. Order Components.) Screw, Truss Head #8-3 x Fastener, J-Type # Tank W/Blanket Warmer, 0V (Includes item & 3) Tank Blanket Warmer, 50W 0V Gasket, Tank Lid Tank Lid Weldment Nut, Hex # Elbow, Male.50" Flare x.5" MPT Nut, Hex Brass.56"- (Water Coil) Gasket, Water Coil Coil Assy, Hot Water (Includes item 8) Thermostat, Limit Nut, Hex.50"-0 (Tank Heater) Gasket, Tank Heater Tank Heater, 30W 0V (Includes two of item ) Thermal Cut-Off (Tank Heater to Upper Terminal Block) Lead, Electrical BLU (Thermostat to Limit to Control Thermostat Lead) Lead, Electrical WHI (Tank Heater Jumper) Thermal Cut-Off Assembly (Tank Heater to Upper Terminal Block) Tank Heater, 800W 0V (Includes two of item ) Sprayhead Tube Kit (Includes 3 mounting nuts below & items 3 & ) Nut, Hex # Gasket, Sprayhead tube Hub, Syphon Nut, Hex Sprayhead, 6-Hol TANK AND COMPONENTS CWTF-MV Thermostat Lead (See Electrical and Operating Controls) Terminal Block, Upper (See Electrical and Operating Controls)

22 BUNN EXTERNAL STRAINER - FLOW CONTROL, SOLENOID AND LINES CWT CWTF EARLY BREWERS WITH FAUCET BREWERS WITH FAUCET 0 STRAINER/FLOW CONTROL 6 REPAIR PARTS SOLENOIDS W/.0" DIA COIL 3 0 SOLENOIDS W/.8" DIA COIL 0 3 SOLENOID REPAIR PARTS BREWERS WITHOUT FAUCET P

23 EXTERNAL STRAINER - FLOW CONTROL, SOLENOID AND LINES ITEM PART NO. QTY. DESCRIPTION * FIRST TYPE ** SECOND TYPE * ** Strainer/Flow Control Assembly (. GPM) (Includes items thru & 6)(Brewers with Faucet and 6-Hole Sprayhead) (Not Available. Order 39.0) Strainer/Flow Control Assembly (. GPM) (Includes items thru 6)(Brewers with Faucet and 6-Hole Sprayhead) Strainer/Flow Control Assembly (.75 GPM) (Includes items thru & 6)(Brewers with Faucet and 5-Hole Sprayhead) (Not Available. Order ) Strainer/Flow Control Assembly (.75 GPM) (Includes items thru 6)(Brewers with Faucet and 5-Hole Sprayhead) Tube Assembly, Flow Control to Needle Valve Tube Assembly, Flow Control to Tee Needle Valve,.50 Flare Tee,.50 Flare Tube Assembly, Flow Control to Bulkhead and Needle Valve To Bulkhead Tube Assembly, Tee to Bulkhead Tube Assembly, Flow Control to Bulkhead Strainer/Flow Control Assembly (. GPM)(Includes items 7 thru )(Brewers with Faucet and 6-Hole Sprayhead))Not Available. Order item ) Strainer/Flow Control Assembly (.75 GPM)(Includes items 7 thru )(Brewers with Faucet and 5-Hole Sprayhead)(Not Available. Order item ) Strainer/Flow Control Assembly (. GPM)(Includes items 7 thru )(Brewers without Faucet and with 6-Hole Sprayhead)(Also used on Brewers with second type strainer/flow control and faucet) Strainer/Flow Control Assembly (.75 GPM)(Includes items 7 thru )(Brewers without Faucet and with 5-Hole Sprayhead)(Also used on Brewers with second type strainer/flow control and faucet) Fitting, Flow Control Inlet Screen Body (Not Available. Order Item 6) Flow Washer/Gasket Set (. GPM) (Includes item ) Flow Washer/Gasket Set (.75 GPM) (Includes item ) Gasket, Flow Control Fitting, Flow Control Outlet Fitting, Bulkhead.50 Flare Lockwasher, Internal Tooth Nut, Hex Tube Assembly, Bulkhead to Coil Tube Assembly, Bulkhead to Solenoid Connector, Male.50 Flare x.5 MPT One less used on Brewers without Faucet (Continued)

24 BUNN EXTERNAL STRAINER - FLOW CONTROL, SOLENOID AND LINES (Continued) CWT CWTF EARLY BREWERS WITH FAUCET BREWERS WITH FAUCET 0 STRAINER/FLOW CONTROL 6 REPAIR PARTS SOLENOIDS W/.0" DIA COIL 3 0 SOLENOIDS W/.8" DIA COIL 0 3 SOLENOID REPAIR PARTS BREWERS WITHOUT FAUCET P

25 EXTERNAL STRAINER - FLOW CONTROL, SOLENOID AND LINES ITEM PART NO. QTY. DESCRIPTION *FIRST TYPE **SECOND TYPE * ** Solenoid Valve, 0V-.8" Dia Coil (Not available, order ) Solenoid Valve, 0V-.0" Dia Coil Solenoid Valve, 00V Solenoid Valve, 0V Screw, Pan Head #0-3 x Lockwasher, Split # Solenoid Valve Base -.8" Dia Coil (Not available, order ) Solenoid Valve Base Kit -.0" Dia Coil (Includes O-ring) Guide -.8" Dia Coil Guide Kit -.0" Dia Coil (Includes Washer & O-ring) Solenoid Valve Coil, 0V -.8" Dia Coil Solenoid Valve Coil, 0V -.0" Dia Coil Solenoid Valve Coil, 00V Solenoid Valve Coil, 0V Solenoid Valve Repair Kit -.8" Dia Coil (Includes Plunger, Seal and Spring) Solenoid Valve Repair Kit -.0" Dia Coil (Includes Plunger, Spring and O-ring) Bracket, Solenoid Mounting Screw,Pan Head Serrated #8-3 x Tube Assembly, Solenoid to Fill Basin (See FILL BASIN) Strainer/Flow Control Assembly (. GPM) (Includes items 6 &6)(Brewers without Faucet and with 6-Hole Sprayhead) Strainer/Flow Control Assembly (.75 GPM)(Includes items 6 & 6)(Brewers without Faucet and with 5-Hole Sprayhead) Tube Assembly, Flow Control to Bulkhead Plug, Hole.37 I.D. (Brewers without Faucet)

26 BUNN INTERNAL STRAINER-FLOW CONTROL, SOLENOID AND LINES - CWT, CWTF, CWTB & CWTFB CWT CWTF SOLENOIDS W/.0" DIA COIL SOLENOIDS W/.8" DIA COIL SOLENOID REPAIR PARTS P

27 INTERNAL STRAINER-FLOW CONTROL, SOLENOID AND LINES - CWT, CWTF, CWTB & CWTFB ITEM PART NO. QTY. DESCRIPTION Manifold/Needle Valve Assembly (Includes item, 3 & )(Brewers with Faucet) Tube Assembly, Manifold Needle Valve,.50 Flare Tube Assembly, Needle Valve to Bulkhead Fitting, Bulkhead.50 Flare Lockwasher, Internal Tooth Nut, Hex.38-0 One less used on Brewers without Faucet Tube Assembly, Bulkhead to Coil (Brewers with Faucet) Strainer/Flow Control Assembly (Includes items 0, & 5) Tube Assembly, Bulkhead to Strainer/Flow Control Strainer/Flow Control Assembly (Includes items, 3 & 5) Strainer/Flow Control Body and Screen Assembly (Not available. Order item ) Flow Washer,. GPM Fitting and Gasket, Flow Control Outlet (Not available. Order item ) Tube Assembly, Strainer/Flow Control to Solenoid Connector, Male.50 Flare x.5 MPT Solenoid Valve, 0V -.8" Dia Coil (Not available, order ) Solenoid Valve, 0V - " Dia Coil Solenoid Valve, 00V Screw, Pan Head #0-3 x.375" Lockwasher, Split # Solenoid Valve Base -.8" Dia Coil Solenoid Valve Base Kit - " Dia Coil (Includes O-ring) Guide -.8" Dia Coil Guide Kit - " Dia Coil (Includes Washer & O-ring) Solenoid Valve Coil, 0V -.8" Dia Solenoid Valve Coil, 0V - " Dia Solenoid Valve Coil, 00V Solenoid Valve Repair Kit -.8" Dia Coil (Includes Plunger, Seal and Spring) Solenoid Valve Repair Kit - " Dia Coil (Includes Plunger, Spring and O-ring) Bracket, Solenoid Mounting Screw,Pan Head Serrated #8-3 x.375" Tube Assembly, Solenoid to Fill Basin (See Fill Basin)

28 BUNN FAUCET AND TUBING CWT CWTF 5 Early Models CW SERIES BUNN P

29 ITEM PART NO. QTY. DESCRIPTION Tube Assembly, Coil to Faucet (Early Models) Tube Assembly, Coil to Faucet (Late Models) Faucet Jam Nut Lockwasher, Internal Tooth.38 I.D Faucet, Hot Water (Includes items 5 thru ) Faucet Handle/Stem Assembly (Includes items 6 thru ) Faucet Handle Kit (Includes item 7) Pin, Spring.5 Dia x Faucet Bonnet Nut Faucet Spring Faucet Stem Faucet Seat Cup Faucet Safety Clip Faucet Aerator Kit FAUCET AND TUBING Body, Faucet (Not available. Order item )

30 BUNN ELECTRICAL AND OPERATING CONTROLS CWT CWTF ONE LOWER WARMER ON/LOWER START BRASS MODELS ON/LOWER START TOP ONE LOWER & 0NE UPPER WARMER ON/LOWER START FRONT-SIDE-REAR THREE LOWER WARMERS (LEFT OR RIGHT) ON/LOWER START FRONT-TOP-REAR ONE LOWER & TWO UPPER WARMERS TOP ON/LOWER START FRONT-SIDE-REAR ONE UPPER & THREE LOWER WARMERS (LEFT OR RIGHT) 0 BREWERS WITH SWITCH COVER MODEL 0 & 35 BREWERS EXCEPT A MODELS A MODELS ONLY 6 A MODELS ONLY 0 EARLY MODEL TIMER EARLY MODELS P

31 ITEM PART NO. QTY. DESCRIPTION ELECTRICAL AND OPERATING CONTROLS Switch Blank, BLK Switch ON/OFF 0V Switch ON/OFF 0V Use as required Switch, Momentary Start Label, Switch ON/OFF (One warmer brewer) Label, Switch ON/OFF (Two warmer brewer) Label, Switch ON/OFF (Three lower warmer brewer left or right) Label, Switch ON/OFF (One lower warmer and two upper warmer brewer) Label, Switch ON/OFF (Four warmer brewer) Terminal Housing, Receptacle Control Panel Control Panel (Brewers with Switch Guard) Screw, Phillip Pan Head #6-3 x.65" Nut, Keps # Decal, Control Panel (W/Faucet and Ready Light) Decal, Control Panel (W/Ready Light) Decal, Control Panel (W/Out Faucet and Ready Light) Decal, Control Panel (W/Faucet) Decal, Control Panel (W/Faucet and Fresh Light) Decal, Control Panel (W/Switch Guard, Faucet and Ready Light) Light Assembly, 0V Green Light Assembly, 0V/0V & 0V Green Includes Item Lamp Assembly, 0V LED Red(Brewers W/ Fresh Light) Lockwasher M Nut M Bushing, Snap.875" Dia Timer Kit, Digital 0V Timer, 5 Min. 0V Timer Kit, Digital 0V Timer, 5 Min. 0V Early models. Order item 57 Late models Screw, Pan Head-Serrated #8-3 x.375" (Early models) Screw, Round Head #8-3 x.0" (Late models) Cap, Terminal (not illustrated) Spacer, Nylon.3" (Early Digital Timer) Spacer, Nylon.50" ( less used W/Early Digital Timer) Thermostat Kit (Includes item ) (Replaces Thermostat W/Leads) Thermostat Kit (Includes item ) (Replaces Thermostats W/Out Leads) Screw, Pan Head #8-3 x.375" (Mounting) Screw, Binding Head #8-3 x.5 (Terminal) Screw, Hex Head #0 x.375" (Cord Ground. Not used on A Models) Screw, Pan Head #0 x.50 (Cord Ground - Brass Models) (Continued)

32 BUNN ELECTRICAL AND OPERATING CONTROLS (Continued) CWT CWTF ONE LOWER WARMER ON/LOWER START BRASS MODELS ON/LOWER START TOP ONE LOWER & 0NE UPPER WARMER ON/LOWER START FRONT-SIDE-REAR THREE LOWER WARMERS (LEFT OR RIGHT) ON/LOWER START FRONT-TOP-REAR ONE LOWER & TWO UPPER WARMERS TOP ON/LOWER START FRONT-SIDE-REAR ONE UPPER & THREE LOWER WARMERS (LEFT OR RIGHT) 0 BREWERS WITH SWITCH COVER MODEL 0 & 35 BREWERS EXCEPT A MODELS A MODELS ONLY 6 A MODELS ONLY 0 EARLY MODEL TIMER EARLY MODELS P

33 ITEM PART NO. QTY. DESCRIPTION ELECTRICAL AND OPERATING CONTROLS Bracket Assembly, Component Mounting Screw, Truss Head #6-3 x.375" (Early models) Screw, Pan Head #8-3 x.375" (Late models) Screw, Hex-Crimptite #6 x.50" Terminal Block, Pole-White/Black Terminal Block, 3 Pole-Red/White/Black Screw, Truss Head #8-3 x.50" Grommet, Thermostat Lead, Electrical Grn/Yel 7.0" LG ( Ground to white pole in terminal block) Screw, Pan Head - Brass #0-3 X.500" Lockwasher, External Tooth # Decal, Ground A Models Only Facenut, Plastic Nut, Hex Bracket, Switch Indicator/Guard Switch, ON/OFF Toggle (Includes item ) Bushing, Strain Relief (Model 5 Brewers) Connector, Cable.50 MPT (Model 0 & 35 Brewers except A Models) Bushing, Strain Relief ( A Models Only) Bracket, Circuit Board Mounting Screw, Truss Head #8-3 x.38" Circuit Board, Fresh Light Screw, Truss Head #8-3 x.6" Lockwasher,External Tooth #8 Brewers W/Fresh Light Spacer, Nylon.7" I.D. x.375" O.D. x.30" LG Bracket, Relay Mounting Screw, Pan Head #8-3 x.375" Relay, 0V (Includes item 3) Screw, Truss Head #6-3 x.375" Brewers W/Recovery Booster only Fuse Holder (CWTF-MV Models) Screw, Truss Head #8-3 x Fuse, SC Series (CWTF-MV Models. Not Illustrated) Terminal Block, Upper (CWTF-MV Models) Screw, Truss Head 3*-3 x Bracket, Terminal Block Mounting (CWTF-MV Models) Adapter Plate, Switch Washer, Anti-Rotation Lock Brass Models Only (Continued)

34 BUNN ELECTRICAL AND OPERATING CONTROLS (Continued) CWT CWTF ONE LOWER WARMER ON/LOWER START BRASS MODELS ON/LOWER START TOP ONE LOWER & 0NE UPPER WARMER ON/LOWER START FRONT-SIDE-REAR THREE LOWER WARMERS (LEFT OR RIGHT) ON/LOWER START FRONT-TOP-REAR ONE LOWER & TWO UPPER WARMERS TOP ON/LOWER START FRONT-SIDE-REAR ONE UPPER & THREE LOWER WARMERS (LEFT OR RIGHT) 0 BREWERS WITH SWITCH COVER MODEL 0 & 35 BREWERS EXCEPT A MODELS A MODELS ONLY 6 A MODELS ONLY 0 EARLY MODEL TIMER EARLY MODELS P

35 ITEM PART NO. QTY. DESCRIPTION Knob, Thermostat Spacer, Hinged Screw, Truss-Head #6-3 x.5" Lockwasher, Ext.-toothed # Cover, Switch Screw, Truss-Head #6-3 x.5" Note: The following items are not illustrated. ELECTRICAL AND OPERATING CONTROLS Power Cord Assembly (Model 5 Brewers Only) Wiring Harness, Ready Light Lead Assembly, 8 AWG BLU.5 LG Control Thermostat to Ready Light (CWTF-MV Models) Wiring Harness, Main 0V (Early Models) Wiring Harness, Main 0V (Late Models) Wiring Harness, Main 0V (Models without Warmers) Wiring Harness, Main 0V/0V (Early Models) Wiring Harness, Main 0V/0V (Late Models) Wiring Harness, Main 0V/0V (Models without Warmers) Wiring Harness, Main (CWTF-MV Models)(Early Models) Wiring Harness, Main (CWTF-MV Models)(Late Models) Wiring Harness, Main 00V & 0V Wiring Harness, Thermostat/Ready Light to Upper Terminal Block (CWTF-MV Models) Wiring Harness, Fresh Light Lead Assembly, LED Lamp (8" Long) Wire Nut, -AWG - Yellow Cap, Terminal (Use as required) Wiring Harness, 0/0V Thermostat to Tank Heater Wiring Harness, 0/0V Relay to Thermostat Lead Assy, BLK Relay to Solenoid Lead Assy, WHT Relay to Solenoid Brewers With Recovery Booster only Wiring Harness, Digital Timer (Early models with Digital Timer) Timer Kit, Digital 0V Timer Kit, Digital 0V Replaces Early Model Timer W/Digital Timer

36 BUNN WARMER ASSEMBLIES CWT CWTF UPPER AND SIDE WARMERS 7 LOWER WARMERS A & B MODELS ONLY P

37 ITEM PART NO. QTY. DESCRIPTION WARMER ASSEMBLIES Warmer Assembly 00W 0V, Top and Side Warmers (Includes items 3 thru 6) Warmer Assembly 00W 0V, Top and Side Warmers (Includes items 3, & 6) Warmer Assembly 00W 00V, Top and Side Warmers (Includes items 3, & 6) Screw, Pan Head - SST #-0 x Screw, Pan Head - Brass #-0 x Fastener, J-Type # Warmer Assembly 00W 0V, Base Warmers (Includes items 3 thru 6) Warmer Assembly 00W 0V, Base Warmers (Includes items 3, & 6) 0.00 Warmer Assembly 00W 00V, Base Warmers (Includes items 3, & 6) Screw, Pan Head - SST #-0 x Screw, Pan Head - Brass #-0 x Fastener, J-Type # Warmer Dish, Blk 5 Hole Warmer Element 00W 0V Top and Side Warmers Warmer Element 00W 0V Top and Side Warmers ( A Models) Warmer Element 00W 00V Top and Side Warmers ( B Models).0000 Warmer Element 00W 0V Base Warmers Warmer Element 00W 0V Base Warmers ( A Models) Warmer Element 00W 00V Base Warmers ( B Models) Spacer,.7 I.D. x.88 (Not Used on A & B Models) Plate, Element Retaining Nut, Keps # Tube, Silicone.50 Dia x.88 LG. (Order Item ) Bushing, Snap.88 Dia. (See Hood And Top Covers) Clamp, Routing Nut, Hex #8-3 (Early Models) Screw, Hex-Crimptite #6-3 x. 375 (Late Models) Lead, Electrical, Lower Warmers GRN/YEL 5 LG Lead, Electrical, Two Top Warmers GRN/YEL 0 LG Lead, Electrical, GRN/YEL 6 LG Top Warmer Wiring Harness, One Rear Top Warmer Brewers 0V Wiring Harness, One Front Top Warmer Brewers 0V Wiring Harness, One Rear Top Warmer Brewers 0V Wiring Harness, Two Top Warmer Brewers 0V Wiring Harness, Four Warmer Brewers 0V Wiring Harness, Four Warmer Brewers 0V Tube, Silicone.50 Dia. x LG (Use as required) A Models Only Wiring Harness, Three Warmer Brewers 0V & CWTF-MV Models Wiring Harness, Three Warmer Brewers 0V Not Illustrated

38 BUNN FUNNELS AND FILTER BASKET CWT CWTF P

39 ITEM PART NO. QTY. DESCRIPTION Funnel W/Decals, Plastic (Black 7.5 Dia) (Includes items 6, 7 and 8) Funnel W/Decals, Plastic (Orange 7.5 Dia) (Includes items 6, 7 and 8) Funnel W/Decals, Plastic (Smoke 7.5 Dia) (Includes items 6, 7 and 8) Funnel Assy, SST W/Black Handle (7.5 Dia) (Includes items thru 5) Funnel Assy, SST W/Orange Handle (7.5 Dia) (Includes items thru 5) Funnel Assy, SST W/Black Handle (7.65 Dia) (Includes items thru 5) Funnel Assy, SST W/Orange Handle (7.65 Dia) (Includes items thru 5) Funnel W/Decals, Pouch-Pack Black (Large) (7.5 ) (Includes item 8) Filter Basket (7.5 Dia) Filter Basket (7.65 Dia) Funnel W/Decals, SST (7.5 Dia) (Includes items 6 and 7) Funnel W/Decals, SST (7.65 Dia) (Includes items 6 and 7) Handle Kit, Black (Includes Screw) 0.00 Handle Kit, Orange (Includes Screw) Screw, Round Head #0-3 x Funnel Tip Kit Decal, Warning-remove Funnel Decal, Warning-Hot Liquid Decal, Warning-Hot Liquid/Remove Funnel Splash Guard FUNNELS AND FILTER BASKET

40 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO , , , , , , ,7, ,7, ,7,9, ,7, ,9,, ,,3,7,... 9, ,3, ,9, ,9, ,3, ,9, ,7, ,9, , ,9, , , , , , , , , , , ,7,9,, , , ,3, , , , ,7, ,9,, ,7, , , ,7,9,,3,... 5,7,3, , , , , , , ,9, ,9, , ,9, , ,9, ,9, , ,9, ,9, ,7, ,7, , ,9, ,7, , , , , , , , , , , ,

41 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO ,7, , , , ,9, , , , , , , , , , , , , , , ,9, ,