2015 Wood Fire Range

Transcription

1 2015 Wood Fire Range

2 Clean air models These models are suitable for any size property and can be installed into a clean air zone Model Tiny Ped Tiny Rad R1 Wee Rad [LEGS or BASE] Wee Ped Ambie One Classic Rad R2 Xtreme Rad [LEGS or BASE] Est. heating area 120m2 120m2 150m2 150m2 150m2 170m2 170m2 220m2 220m2 Heat output 11kW 11kW 15kW 15kW 15kW 15kW 17kW 20kW 20kW Wetback * Appliance finish HT HT HT HT HT/VE VE HT HT HT Page reference Model Xtreme Ped Ambie Plus Euro Ped Euro Rad Mega Rad Trend Insert Smart Insert Mega Smart Est. heating area 220m2 220m2 220m2 220m2 280m2 150m2 150m2 220m2 Heat output 20kW 20kW 20kW 20kW 24kW 15kW 15kW 20kW Wetback * * Appliance finish HT/VE/S VE VE HT HT VE HT/VE VE/S Page reference This model is not approved with a wetback in a clean air zone, but can be installed with a wetback on properties of 2 hectares or greater, being all non clean air zones. * LTD models These models are suitable for properties with a land area of two hectares or greater Model LTD Wee Rad [LEGS or BASE] LTD Xtreme Rad [LEGS or BASE] LTD Mega Rad LTD Mega Ped LTD Trend Insert Est. heating area 150m2 220m2 280m2 280m2 150m2 Heat output 15kW 20kW 24kW 24kW 15kW Wetback Appliance finish HT HT HT VE VE Page reference HT= High temperature paint finish / VE= Vitreous Enamel finish / S= Silver finish

3 Welcome natural warmth and comfort to your home Metro fires are proudly designed and manufactured in New Zealand for kiwi homes A Metro fire will do more than simply heat your home. It can also heat water, save on power bills, provide security against electricity restrictions or outages, and can also be used to cook on and boil water for drinking. Metro wood fires are proudly designed and made in New Zealand, using the highest quality materials, workmanship and the very latest manufacturing techniques. Ongoing investment into research and development, rigorous quality control and premium warranties are testament to Metro s commitment to remain at the forefront of the wood fire industry. Wood fires release their heat through a combination of heat radiation, which heats objects, and convection which heats the air. The amount of each varies with most models being predominantly one type or the other. A convection wood fire heats the air immediately around it. Hot air is lighter (less dense) so it rises away from the wood fire and gets replaced with cooler air that is then heated. This convection air-current means that the hottest air in the room rises up to the ceiling with the warmer air remaining in the lower part of your room. Radiant wood fires release heat into the room by radiating an infrared heat directly from the outer surfaces of the appliance onto any object in close proximity. This results in more heat being retained lower in the room. Ideal for older and less insulated (or draughty) homes, and homes with higher ceilings. Convection heat Radiant heat Manufactured using the highest quality materials providing top performance and longevity OR CLEAN AIR LTD RURAL A comprehensive range of clean air approved and LTD wood fires to suit both urban and rural homes. Designed and manufactured in New Zealand by a New Zealand owned and operated company. Cooktops Firebox tops, single or twin layers of 6mm, 8mm or 10mm quality NZ made steel Coating systems All coatings are either USA made high temperature metallic black paint, or quality NZ applied vitreous enamel or a baked on and polished high temperature silver Baffles 6mm thick NZ made steel for all baffle plates Most Metro s can be fitted with a wetback to assist or fulfil your water heating requirements. Outer panels Fabricated from quality NZ made steel Baffle linings of German engineered high temperature calcium silicate boards All fireboxes are constructed with 6, 8 or 10mm NZ steel and firebrick lined for superior efficiency and longevity. Metro ECO Flue Systems draw cooling air from the ceiling cavity or outside, not from the room the fire is heating. Minimal clearances are required to a combustible surface allowing for compact wall and corner installations. Peace of mind with our premium 10 year firebox warranty and 1 year parts warranty on all Metro fires. Glass 5mm Robax German Ceramic Glass Bricks 25mm thick masonry refractory composite Metro side wall fire bricks Firebox Fireboxes are constructed of quality NZ made 6mm steel plate Robotic welds Firebox and outer panels welded using the latest robotic techniques to stringent quality control standards 2

4 5 easy steps to choosing and installing a Metro fire in your home There are many factors to consider when installing a wood fire in your home and ensuring you select the correct size and model for your home and heating requirements is key. Choosing the right wood fire and correct operation with good dry fuel will provide you with years of warmth and trouble-free heating. Our 5 easy steps will assist you in choosing a suitable model and your Metro specialist or installer can provide any further advice you require. The fold-out tab inside the rear cover of this catalogue provides a quickfire key to the icons detailed beside each model throughout the catalogue. Check your property size 1 If less than 2ha, you can only install a clean air model If 2ha or more, you can install an LTD or clean air model Check your local council bylaws 2Some councils have more stringent emission requirements than the National Environmental Standards which permits a maximum of 1.5 grams of particulates per kilogram of fuel burnt with a minimum heating efficiency of 65%. Choose the right model Metro fire 3Measure the area (m2) you wish to heat. Homes with a high stud, lack of insulation or installation of a wetback or heat transfer system may require more heating capacity. A Metro specialist can provide further advice. Your Metro fire can be freestanding, insert or built-in. Select the best installation location 4The position of your fire will determine how well it heats your home. Position your fire for optimum flue installation. A Metro retailer or installer should visit your home to advise on the correct model and position for your needs. Use an approved installer 5Metro wood fires should be installed by an approved installer and must be installed to the manufacturers specifications. Your Metro specialist or installer may also manage the council permit process through to completed installation. 3

5 Small in size punching well above its weight. Clean air models These models are suitable for any size property and can be installed into a clean air zone Tiny Ped 120m2 11kW Wetback Tiny Rad 120m2 11kW Wetback Tiny Series Tiny Series Designed to heat smaller homes and open areas. The Tiny Ped has the smallest footprint with corner and wall clearances of only 25mm and 60mm respectively. Featuring a surprisingly large firebox for a compact wood fire. This fire punches well above its weight with a peak heat output of 11kW. metallic black paint The Tiny Rad is the smallest Rad in the Metro lineup and stands proudly on legs. Perfect for smaller sized homes or the weekend bach. Cook your favourite soup or boil the kettle on the dedicated cooktop. A small versatile fire that does it all and will provide many years of warmth. metallic black paint 4

6 Trusted reliable heat for your home. The hot favourites this winter. Base option R1 - Metallic black/charcoal R1 R Series The raw design of the R1 delivers a true radiant fire to the Metro range. Featuring a peak heat output of 15kW coupled with a decent size firebox, the R1 will keep your home and family warm this winter with its impressive radiant heat. All this from a well priced package. (Not wetback capable) metallic black/charcoal paint Wee Rad Wee Series NZ s hot favourite every winter. The Wee Rad has been heating kiwi homes for almost 15 years. Recently updated, the Wee Rad is now bigger, hotter and cleaner burning with a larger door glass for enhanced flame view. A popular model with timeless traditional styling that will easily heat a standard 3 bedroom home for many winters to come. metallic black paint 5

7 Clean air models Heat up to m2 Up to 15kW of heat output Wetback options These models are suitable for any size property and can be installed into a clean air zone Wee Ped Wee Series New for the 2015 season, the Wee Ped features the same heat output as it s Wee Series siblings. Its 15kW peak heat output will drive out the winter cold while its modern design sits well with any home s decor. With enhanced flame picture and smooth contemporary styling, the Wee Ped is more than capable of heating the average 3 bedroom home. metallic black paint matt black enamel Ambie One Ambience Series The smaller model in the Ambience Series, the Ambie One creates an ambience of warmth, comfort and relaxation. Get the best of both radiant and convection heat from this convection wood fire that also throws out huge radiant heat through its one piece glass front. Award winning design that provides warmth and comfort all winter long. gloss black enamel Wee Ped - Matt black enamel The Ambie One is not approved with a wetback in a clean air zone, but can be installed with a wetback on properties of 2 hectares or greater, being all non clean air zones. * 6

8 North-south firebox design maximises fuel loading and heating capacity. Capable of fuel loading up to 540mm deep 540mm Classic Rad Classic Series 530mm wide x 707mm deep x 680mm high New to the radiant line-up for the 2015 season, the Classic Rad features a North/South firebox design which can accomodate firewood up to 540mm long. Firebox design provides increased heating capacity with a peak output of 17kW and the solid 8mm cooktop provides ample space for cookpots and kettle. metallic black paint 7

9 Clean air model Heat up to 170m2 Up to 17kW of heat output Wetback option This model is suitable for any size property and can be installed into a clean air zone Classic Rad - Metallic black 8

10 Impressive performance and output combine to fight off the extreme of winter. Base option R2 R Series The naked ambition of the R2 wood fire delivers true radiant heat that will out perform all expectations with a 20kW peak heat output. The larger model in the R Series, the R2 is ideal for large, older homes and will keep winter at bay with it s remarkable performance. (Not wetback capable) metallic black/charcoal paint Xtreme Rad Xtreme Series The Xtreme Rad features timeless traditional styling and stands proudly in any home. A clean hot burn with generous door glass providing the perfect flame view. The Xtreme Rad easily handles bulky pieces of firewood, and boasts a large cooktop for the convenience of cooking the evening meal. Impressive performance and features combine to fight off the extreme cold of winter. metallic black paint Xtreme Ped Xtreme Series Beat the harshness of winter with the high performing Xtreme Ped. The new Xtreme Ped features a firebox design that burns cleaner and produces more heat for your home. Larger door glass and smooth contemporary styling see this Ped the focal point for warmth and comfort in any modern home. Designed to heat larger homes for many winters to come. metallic black paint matt black enamel silver 9

11 Clean air models Heat up to 220m2 Up to 20kW of heat output Wetback options These models are suitable for any size property and can be installed into a clean air zone Ambie Plus Ambience Series Award winning design, performance and sustainability with style. From the initial spark to the final embers slowly burning out, the Ambie Plus is the embodiment of minimalist design, smooth styling and performance. Get the best of both heats from this convection wood fire that also throws out huge radiant heat through its one piece glass front. gloss black enamel Euro Ped Euro Series For large open-plan homes the Euro Ped will keep the whole family warm and cosy. Featuring the same curved front as the Euro Rad, with the option of direct vent technology allowing the combustion air to be drawn in from outside the home through the floor, wall or ceiling for increased efficiency. matt black enamel matt brown enamel Euro Rad Euro Series The stylish Euro Rad features a curved front with a generous cooktop and a panoramic door glass ensures the perfect flame view from any angle. Optional direct vent technology allows the combustion air to be drawn in from outside the home through the floor, wall or ceiling for increased efficiency. metallic black paint The Euro Rad is not approved with a wetback in a clean air zone, but can be installed with a wetback on properties of 2 hectares or greater, being all non clean air zones. * 10

12 Super-sized heat output delivers warmth to the largest of homes. Capable of fuel loading up to 480mm deep 480mm Mega Rad Mega Series 840mm wide x 657mm deep x 749mm high The largest clean air approved Metro radiant, and the biggest fire in the Metro family. The Mega Rad is new for 2015 and features a huge firebox with solid 10mm cook top to match. This firebox handles hefty firewood with ease and is capable of providing up to 24kW s of peak heat to keep the largest of homes warm and comfortable. metallic black paint 11

13 Clean air model Heat up to 280m2 Up to 24kW of heat output Wetback option This model is suitable for any size property and can be installed into a clean air zone Mega Rad - Metallic black 12

14 Tiny Ped Metallic black finish Euro Ped Matt black finish Mega Smart Silver finish Xtreme Ped Silver finish Smart Insert Matt black finish Installed with a Smart Insert VZCC and optional fascia base rail Euro Rad Metallic black finish Wee Rad Metallic black finish 13

15 Ambie Plus Gloss black finish Classic Rad Metallic black finish Wee Ped Matt black finish Mega Rad Metallic black finish Mega Smart Matt black finish Xtreme Rad Base Metallic black finish R1 Metallic black/charcoal finish 14

16 The perfect blend of functionality and smart contemporary style. Trend Insert 150m2 15kW Wetback * Insert & Built-in Series Requiring a minimal floor protector projection of only 300mm, the Trend Insert is a perfect fit for new and existing installations. Install into either a masonry chimney or timber framed cavity 1. The thermo fan 2 further enhances the convected heat output and circulation within the room. matt black enamel Smart Insert 150m2 15kW Wetback Insert & Built-in Series Less is more with the Smart Insert. Minimal detailing and clean lines place the Smart well in any home. Install into a masonry chimney or timber framed cavity 1 by utilising the Metro Smart Insert Vented Zero Clearance Cabinet and optional fascia base rail. metallic black paint matt black enamel Mega Smart 220m2 20kW Wetback Insert & Built-in Series The perfect blend of functionality and smart contemporary styling. A dedicated built-in appliance designed for installation into a timber framed cavity. With an outstanding peak heat output of 20kW, this inbuilt drives out the cold all winter long. matt black enamel silver The Metro Trend Insert is not approved with a wetback in a clean air zone, but can be installed with a wetback on properties of 2 hectares or greater, being all non clean air zones. * 1 Insert models can be installed into a timber framed cavity with the addition of the appropriate Metro Vented Zero Clearance Cabinet (VZCC) 15 2 The Metro Trend Insert must be fitted with a thermo fan when installed into a clean air zone (under 2 hectares).

17 Clean air models These models are suitable for any size property and can be installed into a clean air zone Installed with a Smart Insert Vented Zero Clearance Cabinet and optional fascia base rail Installation into a timber framed cavity (false chimney) Insert & Built-In Wood Fires Enjoy the look and natural heat from an insert wood fire without the expense of extensive renovations to your home. Metro offer the three following insert models (ECO & LTD Trend Insert and Smart Insert) which are traditionally installed into a masonry chimney, and one dedicated Built-In wood fire (Mega Smart Built-in) specifically designed for installation into a timber framed cavity (false chimney). All Metro Insert wood fires can be converted to a Built-In appliance and installed into a timber framed cavity (false chimney) by utilising a Metro Vented Zero Clearance Cabinet and the Metro ECO Built-In Flue System. The Mega Smart Built-In is a dedicated built-in appliance and comes standard with a Metro Vented Zero Clearance Cabinet (VZCC) pre-fitted to its firebox. Vented Zero Clearance Cabinet (VZCC) The function of the VZCC is to enable the Metro ECO & LTD Trend Inserts, and Smart Insert to be installed into a timber framed cavity. The VZCC replaces the more traditional masonry chimney for a fraction of the cost. Metro ECO Built-In Flue System Metro s ECO Built-In Flue System must be used with all built-in installations of Metro wood fires. This flue system incorporates Metro s unique vertical discharge cowl which improves flue draw and increases performance. Please refer to the Installation/Operation manuals for the Insert and Built-In models and the applicable VZCC Installation manual which are available from your Metro retailer or online 16

18 The perfect fit for New Zealand s lifestyle and rural properties. Base option Base option LTD Wee Rad 150m2 15kW LTD Xtreme Rad 220m2 20kW LTD Mega Rad 280m2 24kW Wee Series Xtreme Series Mega Series NZ s hot favourite every winter. The LTD Wee Rad has been heating kiwi homes for almost 15 years. Now bigger, hotter and cleaner burning with 28% larger door glass for enhanced flame view. A popular model with timeless traditional styling that will easily heat the rural home for many winters to come. metallic black paint The LTD Xtreme Rad is the toughest, hardest worker on the farm now offering more heat output. The deep firebox takes bulky pieces of firewood up to 500mm in length, and the large cook top enables this Rad the practical convenience of being able to cook the evening meal. Come home to the cosy warmth after a hard days work. metallic black paint The largest radiant fire in the Metro LTD range. As the name Mega suggests, this model features a huge firebox with cook top to match. Cooking and water heating are dominant features of this model and like the LTD Mega Ped, the wetback and boiler options can provide up to 7kW s of water heating. metallic black paint 17

19 LTD models Heat up to 280m2 Up to 24kW of heat output Wetback options These models are suitable for properties with a land area of two hectares or greater LTD Mega Ped 280m2 24kW LTD Trend Insert 150m2 15kW Mega Series Insert & Built-in Series The largest convection fire in the Metro range. The LTD Mega Ped boasts a massive 103 litre firebox and produces an impressive 24kW peak heat output. 3kW or 4kW wetback options are available, and two side boilers can be added to provide up to 7kW s of water heating. Keep the farm homestead warm and cosy all winter long. matt black enamel Relax in the warmth and comfort of the LTD Trend Insert. Warm air is convected through the louvres and combined with the heat radiated via the door glass to provide up to 15kW of heat for your home. Featuring a gentle sloping flush front and smooth rolled ashlip, this fire is perfect for new and existing installations into either a masonry chimney or timber framed cavity 1. matt black enamel 1 The LTD Trend Insert model can be installed into a timber framed cavity with the addition of the Metro ECO/LTD Insert Vented Zero Clearance Cabinet (VZCC). 18

20 Trusted reliable heat for your home 10 Year Warranty (The Installation/Operation manual included with your wood fire contains full details) Metro wood fires are manufactured in New Zealand, using the highest quality of materials, workmanship and the latest manufacturing techniques, which is why we offer a full 10 year firebox warranty and 1 year parts warranty for peace of mind. Pioneer Manufacturing Limited (Pioneer) warrants the steel firebox against defective materials and workmanship which would render it unfit for normal domestic use, from the date of purchase by the original consumer, for a period of 10 years. Components including panel coating, door retainers, door seals, glass, trim, baffle & bricks are warranted for a period of 1 year from the date of original purchase for domestic use against defective materials and workmanship. In order to achieve the best performance and longevity from your Metro, it is recommended that a full service inspection is carried out at the end of each winter season. This will ensure any sacrifical parts that may need replacing are monitored on a regular basis. The New Zealand Home Heating Association The NZ Home Heating Association was formed in 1985, by a group of wood heating manufacturers and retailers who saw a need to improve the standards of product and workmanship within the industry. Since then the Association has played an active role in the development of appliance and installation standards both nationally and internationally and has become the industry s mouthpiece. It also plays a major role in the development and promotion of clean air standards, and energy and resource conservation. It runs a certification for installer and retailer members to help ensure that the appropriate standards are maintained at all levels within the industry. The Association is affiliated with similar trade groups and organisations throughout the world. The New Zealand Home Heating Association is a trade organisation, comprising most of NZ s leading wood fire manufacturers, retailers and installers, and is dedicated to providing professional services and advice to it s members and their customers. Wood is good for us and the environment Wood is the worlds most sustainable fuel source and great for heating your home. Wood is natural, carbon neutral, and releases the same amount of CO2 when burnt as if it were left to decompose. CO2 produced by burning wood is re-absorbed by plants and trees through the process of photosynthesis, helping the trees grow and producing oxygen for us to breathe. Oxygen is released Carbon Dioxide is absorbed back into the trees Oxygen is released Carbon Dioxide is released New Zealand s climate produces a lush green environment, ideal for pine plantations which ensures there is long term availability of cost effective fuel. Burning wood efficiently and cleanly is good for the environment and is still the cheapest form of heating for your home, even if you have to purchase firewood. By burning dry, well seasoned wood fuel, you release more heat into your home and require less fuel to do so. Take control of your home s heating costs and drive out the cold this coming winter by installing a Metro wood fire and ECO Flue System. Water and Nutrients Wood is burnt releasing energy as heat into the home This diagram shows the process of photosynthesis, which is one reason why wood is the world s number one sustainable fuel and is carbon neutral. No matter how much wood we use, it will always be reproduced without increasing New Zealand s carbon footprint. 19

21 Metro climate control systems Create a dry, healthy environment and reduce condensation and dampness in your home. Metro heat transfer systems utilise the excess heat created by your wood fire, and distribute it via a ducting system to warm other rooms within your home. Excess heat from your wood fire becomes trapped at ceiling level where it can reach temperatures of up to 30-35ºC. By distributing this excess heat you can easily warm your entire home. 1 Room 1 Room Heat Transfer System Ideal for smaller homes or if you are only requiring one additional room to be heated. The 1 Room System comes with a fan capable of moving 320m3 of heated air per hour. Warmest air rises to ceiling 30-34ºC Comfort level 22-24ºC Transfer heat from your lounge room to 1 other room in your home 1 Room Heat Transfer System components 1 x 150mm dia. spider vent intake grill 1 x thermostat 2 x 3m lengths of 150mm dia. insulated duct 1 x 150mm dia. inline fan 1 x 150mm dia. adjustable cone outlet diffusers 2 x rolls of ducting tape 3 Room Heat Transfer System Designed to distribute an even heat throughout your entire home. The system features a 3 speed controller and European designed 3 speed mixed-flow fan with a maximum airflow of 910m3 of heated air per hour. Additional room outlets can be easily added to extend the system to other rooms in your home. Warmest air rises to ceiling 30-34ºC Comfort level 22-24ºC 3 Room Transfer heat from your lounge room to 3 or more rooms in your home 3 Room Heat Transfer System components 1 x 200mm dia spider vent intake grill 1 x thermostat with 3 speed fan controller 2 x 3m lengths of 200mm dia. insulated duct 1 x 200mm dia. 3 speed fan module 1 x 3 way splitter 3 x 3m lengths of 150mm dia. insulated duct 3 x 150mm dia adjustable cone outlet diffusers 4 x rolls of ducting tape Climate Control System Climate control Utilise your 3 Room Heat Transfer System to circulate fresh filtered air throughout your home during summer. The Fresh Air System is an extension of the Heat Transfer System and is the ideal way to keep your home cool over summer and provide a dry and healthy environment for your family. The Fresh Air System utilises the components of the 3 Room Heat Transfer System and adds extra ducts, dampers and high grade filter Climate Control System components 1 x 200mm intake grill 1 x fresh air/heat switch 1 x 6m length of 200mm dia. Unilok duct 1 x 200mm in-line filter 1 x Y damper 200/200/200mm 1 x Y branch 150/150/150mm 2 x 150mm x 3m insulated duct 1 x 150mm in-line barrel damper 1 x Y branch 200/200/150mm 1 x large roll of ducting tape 20

22 Floor protectors Stylish floor protectors for both wall and corner wood fire installations Metro freestanding wood fires only require an ash hearth/floor protector and are tested to and comply with the minimum floor protector requirements of AS/NZS 2918:2001. The Metro range of floor protectors are an ideal choice for your wood fire. Attractive, durable and cost effective, these floor protectors can be laid on top of existing carpet for quick and easy installation. Finished in three trim options: alloy, pine and pacific rimu with a range of tile colours available. Alloy trim is offered with a black tile only. The black trim is a folded one-piece anodised aluminium extrusion which eliminates sharp corners and visible screws and fixings. Alloy floor protectors are available in four wall sizes and three corner sizes. The pine & pacific rimu floor protectors are enhanced with natural stains and are oiled, waxed and polished to bring out the natural timber grain and lustre. Both pine and pacific rimu floor protectors are offered in two wall sizes and two corner sizes, and are available in Metro s full range of tile colours. The table below details which floor protector will fit each Metro fire to ensure specified clearances are achieved for installation. Wood fires matched to Floor Protectors Alloy Tiny Alloy Small Alloy Medium Alloy Deep Pine Medium Pine Deep Pine Insert Rimu Medium Rimu Deep Alloy 1000 Alloy 1150 Alloy 1300 Pine 1000 Pine 1150 Rimu 1000 Rimu 1150 Clean Air Models Wall Floor Protectors Corner Floor Protectors Ambie One Ambie Plus ECO Tiny Ped ECO Tiny Rad R1 R2 Wee Rad [LEGS] 1 Wee Rad [BASE] Wee Ped Classic Rad 2 Xtreme Ped Xtreme Rad [LEGS & BASE] ECO Euro Rad DV ECO Euro Ped DV Mega Rad ECO Trend Insert Smart Insert LTD Models Wall Floor Protectors Corner Floor Protectors LTD Wee Rad [LEGS] LTD Wee Rad [BASE] LTD Xtreme Rad [LEGS & BASE] LTD Mega Rad LTD Mega Ped 1 This model must have the Pioneer corner wing shields fitted to fit this floor protector. 2 This model must have the Pioneer double flue shield side extensions fitted to fit this floor protector. 21

23 Quick and easy installation Floor protectors in a range of size and colour options to fit your wood fire Tile colours shown below are indicative only. Please view tile samples at your Metro dealer. Alloy/Pine/Rimu trim Black Pine/Rimu trim Granite Pine/Rimu trim Sandstone Pine/Rimu trim Charcoal Polished tile Polished tile Pine/Rimu trim Riverstone Pine/Rimu trim Terracotta Pine/Rimu trim Galaxy Pine/Rimu trim Champagne Floor Protector Dimensions Alloy Tiny Alloy Small Alloy Medium Alloy Deep Pine Medium Pine Deep Pine Insert Rimu Medium Rimu Deep Alloy 1000 Alloy 1150 Alloy 1300 Pine 1000 Pine 1150 Rimu 1000 Rimu 1150 Pioneer Wall Floor Protectors Pioneer Corner Floor Protectors Width Depth X Dimension Y Dimension Z Dimension Thickness PINE INSERT PINE WALL ALLOY & RIMU WALL PINE, ALLOY & RIMU CORNER Please note: All measurements detailed are in mm. The dimensions shown are nominal only. Actual floor protector dimensions may alter slightly to accommodate the varying sizes of the tiles used. Pine and pacific rimu trim floor protectors - When calculating the Min. size floor protector your heating appliance requires, the floor protector is the tiled area only: trim measurement x does not form part of the floor protector and must be deducted from your calculations. Alloy trim floor protectors - The overall dimensions constitute an Ash Floor Protector as the alloy trim is not a combustible material. Please consult your retailer for the full range of tile options available. 22

24 Peak performance from an ECO flue system Maintain a warm home with no heat loss and reduce fuel consumption Metro have dedicated years of development and testing to deliver the best performance and efficiency from a flue system. A Metro ECO Flue System will retain the warmth from your Metro wood fire in your home, and reduce your fuel consumption at the same time. Standard with every ECO Flue System, is the easilyrecognisable Metro ECO Cowl. The rocket shaped ECO Cowl operates on a vertical discharge principle, and induces updraft to the flue gases to increase draw within the flue pipe. Metro offer both the ECO Base Flue System and the ECO Option Kit with optional stainless steel liners for a superior look and finish. (Recommended for all coastal installations) ASK FOR AN WITH YO UR M ETR O Metro ECO Cowl Standard Cowl 23

25 Visit us online to view the Metro ECO Flue system in action. facebook.com/metrofires No heat loss No heat loss Excessive heat loss ECO Base Flue System (for homes with a ceiling cavity) ECO Base Flue System + ECO Option Kit (for homes with no ceiling cavity) Conventional Flue System Metro ECO Flue Systems The Metro ECO Flue system is a double-liner system that consists of a 150mm fluepipe, 200mm and 250mm outer liners. The Metro ECO Flue system is superior to a conventional flue system as it draws its cooling air into the flue liners from either your home s ceiling cavity or from outside your home (ECO Option Kit required). This reduces your fuel consumption and ensures the heat produced by your wood fire is retained within your home instead of escaping up the flue. The energy savings achieved by the ECO Base Flue System are impressive. Lab testing of a conventional flue system resulted in the heated air produced by a wood fire being drawn out of the home at an astounding rate of 450 litres per minute. Metro ECO Option Kit The Metro ECO Option Kit is designed for installation in combination with the Metro ECO Base Flue System. The ECO Option Kit enables homes without a vented ceiling cavity, or with a sloping ceiling, to still achieve the same performance and efficiency benefits the Metro ECO Base Flue System provides. Conventional Flue Systems Conventional flue systems draw their cooling air from the room that is being heated by your wood fire. This results in the heated air from your wood fire being drawn out of your home. This heated air is then replaced with cold outside air drawn back into your home. On a cold winter s night this hugely inefficient system can empty an average sized room once every hour of potentially 28ºC air. It replaces it with the outside air which in some regions can be below zero. Metro ECO Flue Systems (Galvanised and full stainless steel options are available) Type of flue system ECO Base Flue System ECO Option Kit ECO Insert Flue System ECO Built-In Flue System ECO Swap-Over Flue Kit ECO Extension Kit Application Suitable for freestanding wood fires for installation into homes with a vented ceiling cavity (attic space) Designed for addition to the ECO Base Flue System to suit homes with a sloping ceiling or without a vented ceiling cavity Suitable for all Metro Insert fires being installed into a masonry chimney Suitable for all Metro Built-In fires and also Metro Insert fires with VZCC being installed into a timber framed chimney/cavity Only to be used with existing 200mm and 250mm liners - Includes 3x 1200mm lengths of 150mm fluepipe and ECO Cowl Suitable for extending all Metro Flue Systems - Includes 1200mm lengths of 150mm fluepipe, 200mm and 250mm liners See your Metro dealer for a copy of Metrofires 2015 Specifications for full details relating to Metro ECO Flue System s. 24

26 Insert and built-in specifications Floor Protector Requirements A floor protector must project from behind the fascia the distance specified (I) in the table below, and 200mm from each side of the door opening. Minimum projection is the distance from the front of the wall lining (behind the fascia) to the front non combustible point of the floor protector. Smart Insert Requires an insulating floor protector with recommended construction of tiles on 26mm thick eterpan or equivalent. The forward projection is dependent on the height of the fireplace insert above the combustible floor, which is detailed below. ECO Trend Insert On properties less than 2 hectares, the ECO Trend Insert must be installed with Metro s thermo fan which is a single speed, thermostatically controlled device. The ECO Trend Insert only requires a non-insulating ashhearth floor protector. Recommended construction is tiles on 6mm thick non combustible board, but any noncombustible material fixed directly to a combustible floor is acceptable, including glass, steel or aluminium sheet. LTD Trend Insert Requires an insulating floor protector. The forward projection is dependent on the height of the fireplace insert above the combustible floor. The schedule of projections listed for heights of 0mm to 41mm+ can be achieved by the thickness of the floor protector, raising the insert or a combination of the two. Recommended construction is tiled eterpan with a combined thickness as detailed below. Mega Smart Built-In Requires an insulating floor protector with recommended construction of 18mm thick eterpan board or equivalent, finished with a non combustible tile or similar. The floor protector must be a minimum width of 1057mm with a minimum overall projection of 505mm. Mantel clearance If a timber or combustible mantelshelf exists above the fireplace insert opening, it should be a minimum distance above the top of the Metro s fascia, minimum distances (L) are detailed in the table below. If the clearance is less than the minimum specified, a deflector or heat shield will be required to be fitted under the mantel. Please refer to AS/NZS 2918:2001 for further instructions. ECO Trend Insert & LTD Trend Insert Smart Insert Mega Smart Built-In 170mm 360mm 170mm 360mm 360mm Metro insert and built-in fires are tested to comply with AS/NZS 2918:2001 incorporating Appendix E when installed in accordance with the manufacturers installation/operation manual supplied with each fire. Firebox Width Firebox Depth Firebox Height Flue Centre Fascia Width Fascia Depth Fascia Height Min. F/P Width Min. F/P Projection Wetback In Wetback Out Mantel clearance Insert & Built-In Dimensions (mm) A B C D E F G H I J K L ECO Trend Insert Smart Insert Mega Smart Built-In LTD Trend Insert Please note: All measurements detailed for the ECO Trend Insert, Smart Insert and LTD Trend Insert exclude the 13mm insulating blanket. Floor Protector Heights 0mm 10mm 15mm 20mm 25mm 30mm 35mm 40mm 41mm+ ECO Trend Insert - Dimension I 300mm minimum projection is required irrespective of the height of the floor protector Smart Insert - Dimension I 395mm 371mm 371mm 353mm 353mm 332mm 332mm 312mm 312mm Mega Smart Built-In - Dimension I 505mm minimum projection is required irrespective of the height of the floor protector LTD Trend Insert - Dimension I 455mm 455mm 445mm 436mm 424mm 408mm 396mm 366mm 350mm See your Metro dealer for a copy of Metro s 2015 Specifications for full details relating to Metro Inserts, Built-In models, and the Metro Vented Zero Clearance Cabinets. 25

27 Freestanding specifications Minimum clearances All Metro wood fires comply with AS/NZS 2918:2001. Minimum clearances shown below are detailed in millimetres, with a Pioneer double flue shield fitted to the appliance. Measurements are taken from the following reference points as illustrated. From the nearest combustible wall or surface (A, B, D, E, G, H) From the Metro s flue centre (A, B, C, D) From the Metro s cabinet/heatshield outermost point (E, F, G, H) To the edge of the ash floor protectors non-combustible surface (C, F, I, J, K, L, M) AS/NZS 2918:2001 allows for a reduction in minimum clearances as detailed in tables 3.1 and 3.2 of the standard. Some Metro models have undergone additional testing which allows for reduced clearances. Please see the footnotes below the table for the applicable models. Specifications were correct at the time of printing, but may alter and those detailed should be used as a guide only. If in doubt, please consult your nearest Metro retailer. Wetback connections taken facing the Metro/wall Tiny models are 92mm left of the flue centre. Wee models are 226mm left of the flue centre. Classic model is 183mm left of the flue centre. Xtreme models are 275mm left of the flue centre. All other models including all LTD freestanding models, are 140mm left of the flue centre. Ambience models All other models Minimum installation clearances with a Pioneer double flueshield fitted (mm) Wetback Dimensions Clean Air Models A B C D E F G H I J K L M N O Width Depth Height Ambie One Ambie Plus ECO Tiny Ped ECO Tiny Rad R N/A N/A R N/A N/A Wee Rad [LEGS] Wee Rad [BASE] Wee Ped Classic Rad Xtreme Ped Xtreme Rad [LEGS OR BASE] ECO Euro Rad DV ECO Euro Ped DV Mega Rad Wee Rad corner clearance (E) can be reduced to 120mm with the Wee Rad corner wing shields fitted. This in turn also reduces clearances (D) to 425mm, (K) to 1180mm and (L) to 985mm. When fitting the corner wing shields the Wee Rad itself must be installed to a corner clearance (E) of 120mm. The corner wing shields are then fitted which gives a wall to shield corner clearance of 100mm. 2 Wee Ped corner clearance (E) can be reduced to 115mm if installed with a Pioneer double flue shield with the side extensions fitted. This in turn also reduces clearances (D) to 436mm, (K) to 1197mm and (L) to 996mm. 3 Classic Rad corner clearance (E) can be reduced to 180mm if installed with a Pioneer double flue shield with the side extensions fitted. This in turn also reduces clearances (D) to 460mm, (K) to 1430mm and (L) to 1213mm. 4 ECO Euro Ped corner clearance (E) can be reduced to 110mm if installed with a Pioneer double flue shield with the side extensions fitted. This in turn also reduces clearances (D) to 435mm, (K) to 1240mm and (L) to 1060mm. Minimum installation clearances with a Pioneer double flueshield fitted (mm) Wetback Dimensions LTD Models A B C D E F G H I J K L M N O Width Depth Height LTD Wee Rad [LEGS] LTD Wee Rad [BASE] LTD Xtreme Rad [LEGS OR BASE] LTD Mega Rad LTD Mega Ped All specifications are subject to change without notification; If in doubt consult your Metro retailer. 26

28 M /15 PIONEER MANUFACTURING LTD If you would like to donate to Starship please visit: Retailer details