Laboratory glassware washing system

Transcription

1 Laboratory glassware washing system For the Environmentally conscious

2 Driven by customer needs Steelco is a leading infection control solution provider, supplying the healthcare, laboratory research and pharma sectors. ctive in over 0 countries, Steelco has equipped numerous world renown hospitals and counts among its customers household names in the laboratory, pharmaceutical and industrial sectors. Driven by customer feedback, Steelco develops, manufactures and supplies solutions that maximize infection control safety, optimize processes and minimize costs. Our focus on innovation has led us to become leaders in areas such as automation, improving the efficiency and working environment of those that use Steelco products. Whether you are just wishing to replace a single small machine or requiring assistance in designing and equipping your scientific or research laboratory, Steelco and it s factory trained dealers are here to help you make the best decision possible that works for you and then support you every step of the way. Steelco Headquarters - Italy R&D Department Scientific Laboratories Pharmaceutical Laboratories Supporting you every step of the way Steelco provides technical service and user training courses at the Steelco cademy as well as at customer sites. Our optional remote diagnostics capabilities and worldwide team of factory trained engineers ensure that you receive the service support you need to cost effectively maximize the uptime of your sterilizers. 2

3 Laboratory glassware washing systems ENGINEERING Our complete range of reliable washer disinfectors and automation solutions focuses on optimal cleaning results and operator safety. Washing systems can be adapted to effectively decontaminate a wide range of different glassware and other materials of common use in laboratories. Steelco experienced layout design team can help you plan you new or refurbished department and our process engineering team can develop cycles specifically to best meet your needs. Water and energy saving unrivalled levels of efficiency Steelco s washers are already efficient compared to equivalent competitor models. Quality and speed of the washing process are of utmost importance as well as water, detergent and energy consumption. Our washing systems can be configured with pre-heating tanks with water and energy recovery systems. cceptance Tests & on site activities our reliability is unique Factory cceptance Test and Site cceptance Tests. Steelco Group is available anytime to support customers during all acceptance on site including process development and mapping. ll on site activities undertaken to pre-agreed written to protocols according to customer requirements. Steelco keeps records of the technical file of each machine to enable full access in case of third party inspection to verify compliance with directives and regulations currently in force. Installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ) are provided i according to the final scope of supply. Steelco range of washing and sterilization systems for life sciences Washer disinfectors for life science applications Steam Sterilizer for research laboratories Pharmaceutical washing and sterilization systems

4 D Injection nozzles Nozzles are available in different height sizes. clearance from the nozzle final tip and the glassware bottom. glassware of different heights on the same nozzle. ø ø E The critical dimensions to be considered in choosing the suitable nozzle are the following: E dimension: for the correct coupling nozzle/glassware and the check of the distance nozzle/glassware. The * indicates the maximum dimension for the height regulation of nozzles with spring. for the compatibility check washing machine/positioning level. D dimension + clearance: frame and of the number related positions. It is possible to customize the washing cart frame by using different nozzles and/or accessories. D E 90 mm 0,4, D E ,5 2,5 2,5 2,5 2, D E D E bottle support ø 28mm /. code *.74* *.5* * 5.2* * 7.28* * 5.2* * 9.25* D E 85 95* * 85* 25*.5.74* 5.2* 7.28* 9.25* D E D E * 25* * 9.25* flex flex flex Steelco L Series full range for any size of facility Hinged or sliding door, single and double door pass through models also with automatic loading/unloading options. For each Steelco washing device, a wide range of wash carts is available for both standard or configurable solutions. Injection nozzles types Empty version of the racks give the customer the possibility of full configuration. The tables show the maximum glassware diameter allowed in the washing cart = ccording to the glassware shape and dimension, nozzles should be chosen in order to have /90 mm Some kind of nozzles are endowed with adjustable spring retainer. Spring retainers allow to place Nozzle dimensions The final pages of the catalog are dedicated to choosing the most appropriate optimal accessories for convenient loading and to the selection of injection nozzles to set up configurable wash carts. hamber volume 7 lt.04 ft hamber volume 200 lt 7.0 ft hamber volume 250 lt 8.8 ft Standard compliant Steelco Laboratory glassware washers comply with the currents European directives and standards as follow: 200/42/E, 204/5/EU, 204/0/EU and 20/5/EU Directives, EN -, EN , EN 2-, EN ISO 588- current standards. 4

5 For the Environmentally conscious onstant improvements and innovation lead Steelco products to run economically and reach a higher level of environment compatibility. Machines baskets, inserts and accessories Steelco s laboratory glassware washer range offers customers a large choice of machines, racks and inserts all specifically designed to meet the different needs of end users hamber volume 50 lt 2. ft hamber volume 500 lt 7. ft hamber volume 00 lt 2.9 ft hamber volume 500 lt 7. ft complete range racks, inserts, trays, and accessories 5

6 ontrol system Steelcotronic ontrol System, with its auto-diagnostic process, constantly monitors and displays current cycle status and alarms. It allows the operator to optimise the washing process and to personalise programmes on machines. Information can be exported via ethernet connectivity or a US port. LD ontrol System Easy to manage, the touch control system with graphic colour LD display can simplify the operator s job when using the machine. Steelcotronic control system with industrial PL, 5,7 touch screen display. The machine can be provided with a US port that allows the downloading of historical cycle data and enables software upgrade. US port allows an easy paperless document flow, documents can be opened directly by common office applications. Key features - Up to four liquid detergent dosing pumps. - Three water connections are available: cold, warm and DI water. etween each phase of a cycle, water is drained and clean water is introduced for the following phase. n additional tank for pre-heating DI water is optionally available. - Double wall construction and washing chamber insulation in order to reduce heat loss and power consumption. - Large capacity water softeners are available for a continuous supply of softened water. - Water purificator system option.

7 leaning effectiveness Effective Mechanical action with complete coverage is of key importance and one of the main elements to assure an effective cleaning during the washing process. Steelco has customised washing pumps and circuits of each model to ensure a high flow rate combined with effective spray pressure. Direct coupling system for various mobile injection washing carts. The washing chamber and spray arms as well as tank filters are made of high quality ISI L stainless steel (DIN.4404). The washing chamber has rounded edges in order to avoid any dirt traps, minimizing the risk of microbial growth. The external cabinet is made of ISI 04 stainless steel (DIN.40). Water filtering system on three levels. 7

8 L 500 Series Undercounter Glassware Washers 0 cm / 8 2X L 500 S Washing system on two independent levels hamber drying by electrical heating elements Stainless steel or high visibility full glass door 0 cm / 8 2X hamber volume ~7 lt /.04 ft asket volume ~5 lt / 5. ft L 500 L Washing system on two independent levels Forced hot air drying system on two independent levels Stainless steel door version L 500 S only ontrol panel onnections - LED display, programs for laboratory glassware: 5 pre-programmed cycles, 5 customizable cycles. - RS 22 port dedicated for printer or P connection to monitor and validate the washing cycles and/or the data storage. Stainless steel door version L 500 S and L 500 L ontrol panel onnections - LD display, 40 programs for laboratory - RS 22 port for printer or P connection. glassware: 20 pre-programmed cycles, - US port on front panel for cycle data storage 20 customizable cycles. and the program updating. Full glass door version L 500 S, L 500 L and L 500 DRS ontrol panel - Full glass, soft touch control panel, LD display, 40 programs for laboratory glassware: 20 pre-programmed cycles, 20 customizable cycles. onnections - RS 22 port for printer or P connection. - US port on front panel for cycle data storage and the program updating. 8

9 90 cm / 2X L 500 DRS Washing system on two independent levels High power - forced hot air drying system on two independent levels abinet door (00mm width) for: - storage of chemistries - direct access to drying filtering system - direct access to chemical dosing system hamber volume ~7 lt /,04 ft asket volume ~5 lt / 5, ft Stands and side cabinets Different models of 00mm/.8 wide side cabinets allow to locate: - Tank for preheated DI water - Purification system for DI water - Up to four 5 lt./.2 Gal US chemical containers Stands (00mm/2.2 height) equipped with doors for storage access and to improve ergonomics when machines are not undercounter installed. 85cm / hoosing the right configuration and options = compatible function stand cabinet left or right side 900mm machine cabinet on right side only stand + 900mm machine cabinet on right side only comb. comb. 2 comb. comb. 4 comb. 5 comb. comb. 7 comb. 8 comb. 9 pre-heating tank chemical storage purification system th dosing pump integrated printer

10 L 500 Series - Washing carts Full loading space With injection nozzles for glassware With half space + injection nozzles for glassware With injection nozzles for vials 72 - upper washing cart with spray arm, loading space 485x450mm (9 / x7 / 4 ) support grid ensuring a flat surface on a 72, usable height reduced by 50mm (2 ) 52L - lower washing cart, loading space 490x470mm (9 5 / x8 / 2 ) Upper level suggested configuration positions max glassware ø 74mm/2 5 / max glassware h mm/ 5 / 7E frame + nozzles Lower level suggested configuration 9 positions, max glassware ø 70mm/2 / 4 max glassware h 200mm/7 7 / 8 990E frame + 9 nozzles positions, mixed nozzles average glassware ø 70mm/2 / 4 max glassware h mm 990E frame + nozzles nozzles Lower level suggested configurations 8 positions, mixed nozzles max glassware ø 2mm/2 7 / max glassware h mm loading space 250x490mm (9 / x9 5 / ) 97E frame + 9 nozzles nozzles positions, mixed nozzles with supports max glassware ø 70mm/2 / 4 max glassware h mm loading space 290x490mm ( 7 / x9 5 / ) 77E frame + nozzles nozzles Upper level suggested configuration 2 positions, max glassware ø 0mm/ / max glassware h 5...5mm 42E frame + 2 nozzles Lower level suggested configuration 2 positions, max glassware ø 0mm/ / max glassware h 5...5mm 4E frame + 2 nozzles Glassware diam. Top view of a portion of a injection washing cart showing the maximum glassware diameter. max Ø The table shows the maximum glassware diameter in the washing cart frame and position options. Upper level empty racks empty rack code max Ø mm/in. nr. of injection positions Lev. notes 42E 0 / / 2 U only for mm 2,5/0. Ø nozzles 25E 25 / 5 U only for mm 2,5/0. Ø nozzles 2E 40 / 9 / U only for mm 2,5/0. Ø nozzles 809E 50 / 2 4 U only for mm 2,5/0. Ø nozzles 85E 57 / 2 /4 5 U only for mm 2,5-4/0.-0. Ø nozzles 7E 74 / 2 5 / U 72E 90 / 9 / 25 U 95E 5 / 4 8 U 72E 70 / 2 /4 8+2 U see 8,, 5 accessories U = Upper level, L = Lower level Lower level empty racks empty rack code max Ø mm/in. nr. of injection positions Lev. notes 4E 0 / / 2 L only for mm 2,5/0. Ø nozzles E 40 / 9 / L only for mm 2,5/0. Ø nozzles 8E 50 / 2 4 L only for mm 2,5/0. Ø nozzles 8E 5 / 2 / 5 L only for mm 2,5-4/0.-0. Ø nozzles 990E 70 / 2 /4 9 L 7E 89 / /2 25 L 954E 5 / 4 8 L 79E / 4 5 / L 90E 50 / 5 5 / 9 L 97E 2 / 2 7 / 8 L mm 250x490 / 9 / x9 5 / space 77E 70 / 2 /4 2 L mm 290x490 / 7 / x9 5 / space 78E 89 / /2 L mm 25x490 / 7 / x9 5 / space 804E 89 / /2 +2 L see 8,, 5 accessories

11 L 500 Series - washing carts With half space + injection nozzles for vials With injection nozzles + nozzles for vials Multipurpose with injection nozzles + pipettes Injection washing for pipettes Upper level suggested configuration positions, useful ø 2mm/ / 2, equipped with 9mm / 4 height nozzles + loading space 250x490mm (9 / x9 5 / ) Lower level suggested configuration positions, max ø 2mm/ / 2, equipped with 9mm/ / 4 height nozzles + loading space 270x500mm ( 5 / 8 x9 / ) Upper level suggested configuration 8 positions max glassware ø 70mm/2 / 4 max glassware h mm/ 5 / 2 positions max glassware ø 20mm/ / max glassware h mm/ 5 / 72E frame + 8 nozzles nozzles Lower level suggested configuration positions max glassware ø 89mm/ / 2 max glassware h mm/ 5 / 2 positions max glassware ø 20mm/ / max glassware h mm/ 5 / 804E frame + 2 nozzles nozzles note: see also, 8 and 5 accessories 5 lower level: 5 positions for pipettes min pipette length 250mm/9 / max pipette length 55 mm/2 / 2 nozzles h 220mm / and ø max mm/5 / 8 4 nozzles h 220mm / and ø max 98mm/ 7 / 8 nozzles (054922) h mm/ 7 / 8 and ø max 0mm/2 / 8 + additional loading space 20x20mm ( / 4 x9 / ) 9 lower level, max 48 positions. Minimum pipette length 250mm/9 / and 00mm/ / Maximum pipette length 55mm/2 / 79 lower level, max 2 positions. Min. pipette length 5mm/5 5 /, Max. pipette length 470mm / 2 Immersion washing for pipettes Level positions 480 mm / 8 7 / mm / 8 / mm / 9 / The use of an upper level washing cart fitted with rotating spray arm reduces the useful height of the level placed below by 40mm ( 9 / ) and allows a gain of 5mm ( 9 / ) on top lower level, with 2 pipette cassettes. Maximum pipette length 290mm/ 7 /. Pipettes must be fully covered by water and fully immersed within the cassette.

12 L 00 - L - L SL Freestanding Glassware Washers X L 00 Washing and forced hot air drying system on three independent levels The upper level can be connected at two different water/air connections depending on the height of the loaded glassware. High visibility hinged full glass door Sliding drawer for storage of chemical containers (up to three 5 lt/.2 Gal US) hamber volume ~200 lt / 7.0 ft asket volume ~70 lt /.04 ft ontrol panel - Full glass, soft touch control panel, LD display, 40 programs for laboratory glassware: 20 pre-programmed cycles, 20 customizable cycles. onnections - RS 22 port dedicated for printer or P connection to monitor and validate the washing cycles and/or the data storage. 2

13 4X L Washing and forced hot air drying system on four independent levels. The two upper levels can be placed at either one of three different water/air connections depending on the height of the loaded glassware. High visibility hinged full glass door Sliding drawer for storage of chemical containers (up to three 5 lt/.2 Gal US) 4X L SL Washing and forced hot air drying system on four independent levels. The two upper levels can be placed at either one of three different water/air connections depending on the height of the loaded glassware. Vertical sliding down high visibility full glass door Hinged door for access to storage of chemical containers (up to three 5 lt/.2 Gal US) hamber volume ~250 lt / 8.8 ft asket volume ~220 lt / 7.77 ft High capacity L and L SL models can be used to clean large bottles of up to 0 lt, 5.85 Gal US Dimensions Width L 00 L L SL / 25 9/ 27 mm inches 2 27 / 2 /4 mm inches 5/ 72 7/ 77 / mm inches Depth Height

14 L 00 - L - L SL Series - Washing carts Full loading space With injection nozzles for mid size glassware With injection nozzles for mid size glassware With half space + injection nozzles for glassware upper washing cart with washing arm, loading space 485x525mm (9 / x 20 / ) Upper level suggested configuration 42 positions max glassware ø 70mm/2 / 4 max glassware h mm/ 5 / 724E frame + 42 nozzles Lower level suggested configurations 42 positions, max glassware ø 70mm/2 / 4 max glassware h 20mm/9 / 729E frame + 42 nozzles Lower level suggested configurations 24 positions, mixed nozzles max glassware ø 70mm/2 / 4, max glassware h mm loading space mm 20x490 (9 / x9 5 / ) 20 positions max glassware ø 0mm/ 5 / max glassware h 20mm/9 / 20 positions max glassware ø 0mm/ 5 / max glassware h 00mm/ / 7E frame + 2 nozzles nozzles support grid ensuring a flat surface on a 7, usable height reduced by 50mm (2 ) 725E frame + 20 nozzles positions, mixed nozzles average glassware ø 70mm/2 / 4 max glassware h mm 724E frame + nozzles nozzles E frame + 20 nozzles positions, mixed nozzles average glassware ø 70mm/2 / 4 max glassware h mm 729E frame + nozzles nozzles positions, mixed nozzles with supports max glassware ø 0mm/ 5 / max glassware h mm loading space mm 220x490 (8 / x9 5 / ) 72E frame + nozzles nozzles lower washing cart, loading space 490x470mm (9 5 / x8 / 2 ) D 42 positions, mixed nozzles with supports average glassware ø 70mm/2 / 4 max glassware h mm 729E frame + 2 nozzles nozzles Level positions 480 mm / 8 7 / mm / 9 / 80 mm / 7 / 4 2 mm / 8 / mm / L mm / mm / mm / mm / mm / mm / mm / mm / mm / L - L SL 2 The use of an upper level washing cart provided with spray arm reduces the useful height of the level placed below by 40mm/ 9 / but allows a gain of 5mm/ 9 / on top. 4

15 L 00 - L - L SL Series - washing carts With injection nozzles for large size glassware With injection nozzles for vials With injection nozzles + nozzles for vials Injection washing for pipettes Lower level 9 up to 4 items Ø max 240mm/9 7 / up to 5 items Ø max 90mm/9 / 2 40 up to 2 items Ø max 280mm/ 2 lower level, for 50 lt carboy. Only for L model empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level Upper level suggested configurations 2 positions, max glassware ø 25mm/ max glassware h 90mm/ 9 / 48E frame + 2 nozzles note: see also 50 accessory Lower level suggested configurations 2 positions, max glassware ø 25mm/ max glassware h 40mm/5 / 2 49E frame + 2 nozzles note: see also 50 accessory notes 92E 2 / /4 5 U only for mm 2,5/ Ø nozzles 92E 40 / 9 / U only for mm 2,5/ Ø nozzles 87E 5 / 84 U only for mm 2,5/ Ø nozzles 724E 70 / 2 /4 42 U 725E 0 / 5 / 20 U 88E / 4 5 / U 44E / 2 5 / 27 U 99E 20 / / 2 U mm 200x490 / 7 7 x9 5 / space 74E / 2 5 / 24+2 U see 8,, 5 accessories 48E 25 / 2 U only for mm 2,5/ Ø nozzles 9E 40 / 9 / L only for mm 2,5/ Ø nozzles 570E 52 / 2 / 70 L only for mm 2,5-4/ - / Ø nozzles 27E 0 / 2 5 L only for mm 2,5-4/ - / Ø nozzles 729E 70 / 2 /4 42 L 70E 0 / 5 / 20 L 89E / 4 5 / L 442E / 2 5 / 27 L 885E / 5 2 L 57E / 5 / 9 L 7E 70 / 2 /4 24 L mm 20x490 / 9 / x9 5 / space 72E 0 / 5 / 2 L mm 220x490 / 8 / x9 5 / space 8E / 2 5 / 24+2 L see 8,, 5 accessories 49E 25 / 2 L only for mm 2,5/ Ø nozzles max Ø Upper level suggested configurations 2 positions max glassware ø 20mm/ / max glassware h mm/ 5 / 24 positions max glassware ø mm/2 5 / max glassware h mm/ 5 / 74E frame + 2 nozzles nozzles note: see also, 8 and 5 accessories Lower level suggested configurations 2 positions max glassware ø 20mm/ / max glassware h mm/ 5 / 24 positions max glassware ø mm/2 5 / max glassware h 00mm/ / 8E frame + 2 nozzles nozzles note: see also, 8 and 5 accessories Upper and lower level empty racks Top view of a portion of a injection washing cart showing the maximum glassware diameter. The table shows the maximum glassware diameter in the washing cart frame and position options. 989 lower level, max 5 positions. Min. pipette length 250mm/9 / and 00mm/ /. Max. pipette length: 70mm/29 5 / on L model, 55mm/2 / on L 00 model. 7 lower level, max 2 positions. Min. pipette length 5mm/5 5 /. Max. pipette length 470mm / 2 on L 00, 20mm/24 7 / on L Immersion washing for pipettes 74 lower level, with 2 pipettes cassettes, for L only Max. pipette length 520mm/20 / 2 lower level, with pipettes cassettes, for L only. Max. pipette length 290mm/ 7 / 4 lower level, with 2 pipettes cassettes, for L 00 Max. pipette length 290mm/ 7 / Pipettes must be fully covered by water and fully immersed within the cassette. 5

16 L dryer underbench glassware dryer compatible with L 500 Series washer loading racks compact device dedicated to the drying of laboratory glassware. When combined in the same facility ward with L 500 series washers, it allows to reach higher productivity levels. 0 2X cm 2 5 High power forced hot air drying system on two independent levels L 0 Freestanding Glassware Washer X L 0 Washing and forced hot air drying system on three independent levels. The upper levels can be used simultaneously or individually by docking the washing carts to one of the connections suitable for the height of the loaded glassware Hinged door with glass window Sliding drawer for storage of chemical tanks (up to three lt/2.4 Gal US) ontrol panel hamber volume ~00 lt / 2.9 ft asket volume ~40 lt / 5.8 ft LD display, 40 programs for laboratory glassware: 20 pre-programmed cycles, 20 customizable cycles.

17 L 80 Freestanding Glassware Washer 5X L 80 Two washing pumps feeding washing circuits to ensure high flow rate combined with effective spray pressure Washing and forced hot air drying system on five independent levels. The upper levels can be used simultaneously or individually by positioning the washing carts on one of the connections suitable for the height of the loaded glassware Hinged door with glass window hamber volume ~00 lt / 2.9 ft asket volume ~40 lt / 5.8 ft Sliding drawer for storage of chemical tanks (up to three lt/2.4 Gal US) Dimensions L 0 L 80 Width mm inches 44 7 / / 8 Depth mm inches 5 / 8 5 / 8 Height mm 9 9 inches 77 / 4 77 / 4 onnections RS 22 port dedicated for printer or P connection to monitor and validate the washing cycles and/or the data storage. 7

18 L 0 - L 80 Series - Washing carts Full loading space With injection nozzles for mid size glassware With injection nozzles for mid size glassware With half space + injection nozzles for mid size glassware upper washing cart with washing arm, loading space 585xmm (2 x0 / 8 ) 49 - lower washing cart without washing arm, loading space 20xmm (24 7 / x0 / 8 ) Upper level suggested configuration 72 positions max glassware ø 5mm/2 9 / max glassware h mm/ 5 / 4E frame + 72 nozzles Lower level suggested configurations 72 positions, max glassware ø mm/2 5 / max glassware h 20mm/9 / 44E frame + 72 nozzles Upper level suggested configurations 2 positions, max glassware ø 85mm/ / 8 max glassware h 00mm/ / loading space mm 480x585 (8 7 / 8 x2 ) 48 positions max glassware ø 90mm/ 9 / max glassware h 20mm/9 / 48 positions max glassware ø 90mm/ 9 / max glassware h 00mm 4E frame + 2 nozzles E frame + 48 nozzles E frame + 48 nozzles grid to allow the loading of small object on std. washing carts dim. 2x582mm (29 5 / 8 x22 5 / ) 72 positions, mixed nozzles average glassware ø 5mm/2 9 / max glassware h mm 4E frame + 8 nozzles nozzles positions, mixed nozzles average glassware ø mm/2 5 / max glassware h mm 44E frame + 8 nozzles nozzles D 72 positions, mixed nozzles with supports average glassware ø mm/2 5 / max glassware h mm grid cover to be positioned over light object dim. 2x582mm (29 5 / 8 x22 5 / ) 44E frame + 8 nozzles nozzles Level positions L mm / 0 5 / mm / 8 7 / 8 70 mm / / mm / mm / 7 / 580 mm / 22 / 5 4 The use of an upper level washing cart provided with spray arm reduces the useful height of the level placed below by 50mm/2 and allows a gain of 5mm/ 9 / on top. 2 L mm / 0 5 / 2 mm / mm / 8 7 / mm / 4 9 / 5 50 mm / 5 5 / 5 mm / 4 / mm / 9 / 8 80 mm / 7 / 9 70 mm / / 280 mm / 290 mm / 7 / 2 90 mm / 5 / mm / 22 /

19 L 0 - L 80 - washing carts With injection nozzles for large size glassware With injection nozzles + nozzles for vials Injection washing for pipettes Immersion washing for pipettes lower level, capacity: up to 4 items Ø max 240mm/9 7 / item Ø max 5mm/2 / 8 77 lower level, capacity: up to 4 items Ø max 00mm/ / 78 lower level, capacity: up to 2 items Ø max 400mm/5 / 4 suggested configurations upper level 2 positions max glassware ø 20mm/ / max glassware h mm/ 5 / 40 positions max glassware ø mm/2 5 /, max glassware h 20mm/9 / 42E frame + 2 nozzles nozzles note: see also, 8 and 5 accessories 4 lower level, max 88 positions. Min. pipette length 00mm/ / Max. pipette length 450mm/7 / 4 with 2 upper levels installed and 700mm/27 9 / with upper level installed. 48 lower level, with pipettes cassettes, Max. pipette length 520mm/20 / 2 47 lower level, with 2 pipettes cassettes, Max. length 520mm/20 / 2 Pipettes must be fully covered by water and therefore must stay within the cassette. Upper and lower level empty racks wash cart frame selection for custom configurations Selection of an empty rack enables users to customize the wash cart frame using different nozzles and accessories. See final pages of the catalogue. empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes 42E 25 / 0 U only for mm 2,5/ Ø nozzles 4E 5 / 2 9 / 72 U 4E 84 / 5 / 5 U 425E 90 / 9 / 48 U 28E 5 / 4 5 U 444E 50 / 5 5 / 8 U 4E 85 / 2 U mm 480x585 / 8 7 x2 space 42E / 2 5 / 40+2 U see 8,, 5 accessories Top view of a portion of a injection washing cart showing the maximum glassware diameter. max Ø 44E / 2 5 / 72 L 45E 85 / 5 L 424E 90 / 9 / 48 L 29E 5 / 4 5 L 44E 50 / 5 5 / 8 L 42E 90 / 7 /2 L 427E 250 / 9 / L The table shows the maximum glassware diameter in the washing cart frame and position options. 9

20 L 40 SL Freestanding Glassware Washers 4X L 40 SL Washing and forced hot air drying system on four independent levels. The upper levels can be docked to three different water/air connections depending on the height of the loaded glassware. Vertical sliding down full glass door. Steelcotronic control system with industrial PL, 5,7 touch screen display. Up to 5 washing programs for laboratory glassware. Hinged door for access to storage of chemical tanks (up to two lt/2.4 Gal US) Full loading space 90 - upper washing cart with washing arm, loading space 570x00mm (22 7 / x2 5 / 8 ) support grid to have a flat surface on a 90, usable height reduced by 50mm/2 Single pass final rinse L 40 washer can be equipped with a non recirculated final rinse hydraulic circuit option lower washing cart, loading space 570x00mm (22 7 / x2 5 / 8 ) hamber volume ~50 lt / 2. ft asket volume ~280 lt / 9.89 ft Level positions Dimensions L 40 SL 0 mm / 24 / mm / 7 5 / 40 mm / / mm / 8 / 5 70 mm / / 270 mm / 5 / mm / 5 / mm / 7 7 / mm / 5 / The use of an upper level washing cart provided with spray arm reduces the useful height of the level placed below by 40mm/ 9 / but allows a gain of 5mm/ 9 / on top. Width mm inches 0 / 8 Depth mm 800 inches / 2 Height mm 9 inches 77 / 4 20

21 L 40 SL - washing carts Injection nozzles for small size glassware, upper/lower levels Injection nozzles for mid size glassware, upper/lower levels Injection nozzles for large size glassware Injection washing for pipettes suggested configurations 208 positions max glassware ø 4mm/ 5 / 8, max glassware h mm/ 5 / 42E frame nozzles suggested configurations 5 positions max glassware ø 7mm/, max glassware h 20mm/9 / 407E frame + 5 nozzles upper/lower level, capacity: up to 8 items Ø max 200mm/7 7 / 8 40 upper/lower level, capacity: up to 5 items Ø max 240mm/9 7 / 409 lower level, max 200 positions. Min. pipette length 50mm/5 5 / Max. pipette length 20mm/24 7 / 7 positions max glassware ø 5mm/2, max glassware h 80mm/7 / 4E frame + 7 nozzles positions max glassware ø 95mm/ / 4, max glassware h 280mm/ 40E frame + 5 nozzles upper/lower level, capacity: up to 4 items Ø max 280mm/, 7 measuring cylinders: - 4 x max Ømm/5 7 / 8 - x max Ø 80mm/ 7 / 90 positions, max glassware ø 0mm/2 / 8, max glassware h 20mm/9 / 408E frame + 90 nozzles positions max glassware ø 20mm/4 / 4, max glassware h 0mm/ 405E frame + 8 nozzles upper/lower level, capacity: up to 4 items Ø max 280mm/ measuring cylinder Ø max 95mm/ / 4 4E upper level, to be used combined with 409 wash cart for pipettes suggested configuration 402 upper/lower level, capacity: up to items Ø max 05mm/2 20 positions max glassware ø 95mm/ / 4, max glassware h 280mm/ 4E frame + 20 nozzles wash cart frame selection for custom configurations Selection of an empty rack enables users to customize the wash cart frame using different nozzles and accessories. See final pages of the catalogue. Upper and lower level empty racks empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes 42E 4 / U/L only for mm 2,5/0. Ø nozzles 4E 5 / 2 7 U/L only for mm 2,5/0. Ø nozzles 408E 0 / 2 90 U/L only for mm 2,5/0. Ø nozzles 407E 7 / 5 U/L only for mm 2,5-4/0.-0. Ø nozzles 52E 80 / U/L 40E 95 / /4 5 U/L 58E / 4 5 / 22 U/L 405E 20 / 4 /4 8 U/L 59E 5 / 5 5 / 4 U/L 520E 80 / 7 / 8 U/L 4E 95 / /4 20 U Top view of a portion of a injection washing cart showing the maximum glassware diameter allowed max Ø The table shows the maximum glassware diameter allowed in the washing cart frame and of the number related positions. 2

22 L 900 High capacity Glassware Washers 4X L 900 Washing system on four independent levels The upper level can be docked to three different water/air connections depending on the height of the loaded glassware. Two automatic dispensers for liquid chemicals Sliding up, full glass door Storage space for chemical tanks (up to three lt/2.4 Gal US) hamber volume ~500 lt / 7. ft asket volume ~50 lt / 2. ft ontrol panel - LD display, 40 programs for laboratory glassware: 20 pre-programmed cycles, 20 customizable cycles. onnections - RS 22 port dedicated for printer or P connection to monitor and validate the washing cycles and/or the data storage. Level positions The use of an upper level washing cart provided with spray arm reduces the useful height of the level placed below by 50mm/2 but allows a gain of 5mm/ 9 / on top. 585 mm / mm / 9 / 25 mm / 9 / mm / 8 / 5 mm / 2 5 / mm / 2 5 / 7 25 mm / 4 5 / 8 5 mm / 2 / mm / 7 / mm / / L Washer dimensions 900 Width mm 40 inches 44 7 / 8 Depth mm 95 inches Height mm 900 inches 74 / 22

23 L washing carts Full loading space Injection nozzles all levels Half space + Injection nozzles all levels Injection nozzles + Nozzles for vials 4 - upper washing cart with washing arm, loading space 585xmm (2 x0 / 8 ) 25 - lower washing cart without washing arm, loading space 20xmm (24 7 / x0 / 8 ) 44 - grid to allow the loading of small object on std. washing carts dim. 2x582mm (29 5 / 8 x22 5 / ) suggested configurations 72 positions max glassware ø mm/2 5 / max glassware h mm/ 5 / 44E frame + 72 nozzles positions max glassware ø 90mm/ 9 / max glassware h 20mm/9 / 440E frame + 48 nozzles positions, mixed nozzles average glassware ø mm/2 5 / max glassware h mm 44E frame + 8 nozzles nozzles suggested configuration 2 positions, max glassware ø 85mm/ / 8 max glassware h 00mm/ / loading space mm 480x585 (8 7 / 8 x2 ) 450E frame + 2 nozzles Injection Washing for Pipettes suggested configurations upper level 2 positions max glassware ø 20mm/ /, max glassware h mm/ 5 / 40 positions max glassware ø mm/2 5 / max glassware h 20mm/9 / 44E frame + 2 nozzles nozzles note: see also, 8 and 5 accessories D 72 positions, mixed nozzles with supports average glassware ø mm/2 5 / max glassware h mm 44E frame + 8 nozzles nozzles lower level, max 88 positions. Min. pipette length 00mm/ / Max. pipette length 500mm/9 / with upper level installed and 700mm/27 9 / without upper levels installed grid cover to be positioned over light object dim. 2x582mm (29 5 / 8 x22 5 / ) wash cart frame selection for custom configurations Selection of an empty rack enables users to customize the wash cart frame using different nozzles and accessories. See final pages of the catalogue. Empty wash racks empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes 49E 25 / 0 all only for mm 2,5/0. Ø nozzles 44E / 2 5 / 72 all 45E 84 / 5 / 5 all 440E 90 / 9 / 48 all 445E 50 / 5 5 / 8 all 205E 90 / 7 /2 all 450E 85 / 2 all mm 480x585 / 8 7 x2 space 44E / 2 5 / 40+2 all see 8,, 5 accessories Top view of a portion of a injection washing cart showing the maximum glassware diameter. max Ø The table shows the maximum glassware diameter in the washing cart frame and position options. 2

24 L 00 High capacity Glassware Washers L 00 4X Washing system with washing carts composed of 4 removable injection cassettes on two levels. The upper level can be removed depending on the height of the loaded glassware Sliding down full glass door, also available in double door pass-through version Storage space for chemical containers (up to three lt/2.4 Gal US) hamber volume ~500 lt / 7. ft asket volume ~50 lt / 2. ft ontrol panel - Steelcotronic control system with industrial PL, 5,7 touch screen display. Up to 5 washing and programs for laboratory glassware. onnections - RS 22 port for printer connection, Ethernet connection to general data system to monitor and validate the washing cycles and/or the data storage. Level positions 05 mm / 2 /9 / 2 2 mm / / 5 mm / 2 / 8 2 L Washer dimensions 00 Width mm 0 inches 4 5 / L 00 washing cart system comprises a support washing cart that can be configured with removable cassettes on two levels. For injection nozzles details and cassette custom configurations, please refer to the final pages of the catalogue. Depth mm 90 inches 7 / Height mm 940 inches 7 / 8 24

25 L 00 - washing carts ase injection washing cart Injection Washing for Pipettes Injection nozzles all levels 408 lower vertical pippettes cassette 8 positions. Minimum pipette length 270mm/ 5 / 8, maximum pipette length 590mm/2 / 4. suggested configurations 4 positions max glassware ø mm/2 5 /, max glassware h mm/ 5 / composition: 402E frame + 4 nozzles W - base injection washing cart suitable for removable cassettes on 2 levels 24 positions max glassware ø 98mm/ / 8, max glassware h 20mm/9 / composition: 40E frame + 24 nozzles wash cart frame selection for custom configurations Selection of an empty rack enables users to customize the wash cart frame using different nozzles and accessories. See final pages of the catalogue. Empty wash racks empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes 409E 40 / 9 / 99 all only mm 2,5/0. Ø nozzles can be used 407E 50 / 2 7 all 402E / 2 5 / 4 all 40E 98 / 7 24 all 40E 92 / 5 22 all Glassware diameter Top view of a portion of a injection washing cart showing the maximum glassware diameter. max Ø The table shows the maximum glassware diameter in the washing cart frame and position options. 25

26 Technical data L 500 S L 500 L L 500 DRS L 00 L L SL L 40 SL ompliance with standards EN -, EN , EN 2-, EN ISO /42/E, 204/5/EU, 204/0/EU and 20/5/EU Washing system Nr. of independent levels of the washing and/or drying system Nr. of levels that can be used simultaneously Triple stage water filtering system uilt-in water softener - - oiler/tank for preheating DI water 5 5 djustable water temperature (up to 9 ) Double PT 00 probe for temperature check hemicals Std equipment of chemical dosing pumps: nr dditional chemical dosing pumps: up to nr Storage of chemical tanks, nr. and capacity lt/gal US (capacity may vary depending on option configurated in the washer) 5/.2 5/.2 5/.2 5/.2 /2.4 Drying system onvection drying heated by electrical heating elements Forced hot air drying system - Pre filter 98% - Hepa H4 air filter - Steam condenser Device configuration Stainless steel door Stainless steel door with glass window Full glass door Double door pass through version Light inside the chamber ontrol system and traceability LED display control panel, programs LD display control panel, 40 programs LD display soft touch control panel, 40 programs - Touch screen display, 5 programs RS22 - US port 7 - Ethernet connection External printer - Integrated printer - - omplements Integrated lateral compartment (00mm width) Stands (00 mm height) Utilities Electrical feeding Steam feading Standard electrical connection others available on request 20V 400V 400V 400V 400V 400V 400V ~50Hz ~+N 50Hz ~+N 50Hz ~+N 50Hz ~+N 50Hz ~+N 50Hz ~+N 50Hz Total power W note: ) with glass door version only; 2) with LD Soft touch only; ) Preheating tank. Single pass final rinse option on L 40; 4) On removable cassettes; 5) Into side cabinet ) with forced hot air drying system; 7) when configured with LD and LD soft touch control panel = Standard = Optional - = Not available 2

27 L 0 L 80 L 900 L 00 L DRYER washing system selection, injection nozzles, accessories and components /2.4 /2.4 /2.4 / V 400V 400V 400V 20V ~+N 50Hz ~+N 50Hz ~+N 50Hz ~+N 50Hz ~50Hz

28 Washing system selection With preconfigured wash carts Injection washing Immersion and flushing washing ulb, graduated, Pasteur pipettes eakers Jugs Mugs uckets Jars Weighing bottles Funnels Powder funnels Imhoff cones Evaporating dishes Weighing dishes Petri dishes asins Trays Erlenmeyer flasks ottles eakers Weighing bottles Test tubes 28

29 With configurable wash carts Test tubes and vials Volumetric flasks narrow neck Wide neck bottles Erlenmeyer flasks narrow neck Erlenmeyer flasks wide neck Low capacity volumetric flasks entrifuge tubes Graduated cylinders Erlenmeyer flasks wide neck Flat or round bottom flask narrow neck Funnels Wide or narrow neck bottles Graduated cylinders Weighing bottles Graduated cylinders Imhoff cones 29

30 ccessories, inserts and components Example of configuration based on 44 washing cart for L 0 and L 80 glassware washer for simultaneous washing of ø 70mm/2 / 4, ø 85mm/ / 8, and ø 0mm/ 5 / glassware by the use of cap screws for closing injection nozzle seats. insert with 28 spring hooks for laboratory glassware net basket mm.20x20x20 4 / 4 x4 / 4 x4 / 4 4 cover for 97 2 positions insert for Petri dishes 8 mm 0h/ 5 / h 9 mm h/5 / 8 h 70 mm 200h/7 7 / 8 h 77 cover for 8/9/70 8 net separator for /4 net basket Net cover for 2 positions test tubes wash carts (i.e. 42, 44, 72, ) 248x248x250h mm / 9 / 4 x9 / 4 x9 / h 8 248x248xh mm / 9 / 4 x9 / 4 x 7 / 8 h 5 248x248x45h mm / 9 / 4 x9 / 4 x / 4 h (5 to be laid directly on top of the test tubes) 50 djustable height net cover for 2 positions test tubes washing carts (i.e. 48, 49) dim. 5x5x255h mm (4 / 8 x4 / 8 x / h) 0

31 Injection nozzle support Ø mm / H. 40 mm Ø / 4 / H. 5 / Ø mm / H. 8 mm Ø / 4 / H. 7 5 / Gasket for pipette Ø max 4mm/ 9 /, min 4mm/ / ap for closing unused holes 0500 Ø 20 mm / H. 2 mm Ø / / H. / Injection nozzle bottle support Ø mm / H. 200 mm Ø / 4 / H Ø mm / H. mm Ø / 4 / H. 5 Support for injection nozzle ø 2,5mm/ Ø 25 mm / H. mm Ø / H. /2 ap for closing unused holes 0500 Injector sleeve with silicone guard for pipettes (max pipette ø mm/ 7 / ) Plastic cross ø 2mm/ / 4 for injection nozzle ø 2,5mm/ / Plastic cone ø 5mm/ 9 / for injection nozzle ø 2,5mm/ / Injection nozzle cap ø 4mm/ / for injection nozzle ø 2,5mm/ / ottle support ø 28mm/ / 8 for injection nozzle ø mm/ / ottle support ø mm/ 5 / for injection nozzle ø mm/ / ottle support ø 45mm/ / 4 for injection nozzle ø mm/ / Plastic cross ø 54mm/2 / 8 for injection nozzle ø 4mm/ / Injection nozzle cap ø 5mm/ / for injection nozzle ø 4mm/ / Plastic cross ø mm/2 5 / for injection nozzle ø mm/ / Injection nozzle cap ø mm/ / 8 for injection nozzle ø mm/ / Stainless steel cross ø 87mm/ 7 / for injection nozzle ø 8mm/ 5 / 0549 Injection nozzle support for graduated cylinders ø 5mm/4 / 8 h=290mm/ 7 / for injection nozzle ø 8mm/ 5 / ø mm/ / 4 daptor nipple for injection nozzle ø 8mm/ 5 / 0570

32 / 4 / 4 / /4 /4 /4 /4 /4 D E 5 / / / / 80* * 5 / * 5 * D E 2 5 / 5 4 / / / 95* /4* 2 5 / 7 * 5 * 2 5 / * 7 /4* 2 5 / 2 / 25* 9 /4* ,5 2,5 2,5 2,5 2,5 /4 /4 /4 D E 4 / 5 9 / / 4 / 5 9 / / 4 / 2 / / 4 / 2 / / 2 / / D E 2 5 / / / * 7 /4* 2 5 / 2 / 25* 9 /4* /4 /4 /4 /4 /4 /4 /4 /4 D E 2 5 / 5 2 / / / 95* /4* 2 5 / 7 * 5 * 2 5 / * 7 /4* 2 5 / 2 / 25* 9 /4* D E flex flex flex / bottle support ø 28mm / code The * indicates the maximum dimension for the height regulation of nozzles with spring.

33 Injection nozzles types Empty version of the racks give the customer the possibility of full configuration. The tables show the maximum glassware diameter allowed in the washing cart frame and of the number related positions. + = It is possible to customize the washing cart frame by using different nozzles and/or accessories. Injection nozzles Nozzles are available in different height sizes. ccording to the glassware shape and dimension, nozzles should be chosen in order to have /90 mm clearance from the nozzle final tip and the glassware bottom. Some kind of nozzles are endowed with adjustable spring retainer. Spring retainers allow to place glassware of different heights on the same nozzle. 90 mm 0,4, D ø ø E Nozzle dimensions The critical dimensions to be considered in choosing the suitable nozzle are the following: E dimension: for the correct coupling nozzle/glassware and the check of the distance nozzle/glassware. The * indicates the maximum dimension for the height regulation of nozzles with spring. D E 8 5 / 7 / 87 7 / 255 / 25 9 /4 8 5 / 7 / 87 7 / / 8 5 / 7 / / D dimension + clearance: for the compatibility check washing machine/positioning level.

34 Headquarters STEELO S.p.. Via alegante, 27-9 Riese Pio X (TV) - Italy Ph Fax steelco@steelcospa.com ranches STEELO HUNGRY Temesvár u., 9-2 udapest - Hungary Ph Fax steelco@t-online.hu Steam Sterilizer for pharma and research laboratories Dental washer disinfectors STEELO US 4 entral Industrial Drive West Palm each, FL 404 US Ph Fax steelco-usa@steelcospa.com Washer disinfectors for lifescience applications Flusher disinfectors Pharmaceutical washing systems Washer disinfectors Small/medium range Pharmaceutical sterilization systems Washer disinfectors SSD range - Systems and utomations STEELO SI th floor, Suite, IOI usiness Park Persiaran Puchong Jaya Selatan - andar Puchong Jaya 470 Puchong, Selangor - Malaysia Ph (Ext. 2) - Fax: steelco-asia@steelcospa.com D-PD-02-L EN rev_07 The products and technical specifications are subject to change wihout prior notice. Please consult your Steelco dealer for the latest information.