Owners Guide ScaleSolver Residential System

Transcription

1 Owners Guide ScaleSolver Residential System Models SS-5544S - 1 SS-5544E - 1 1/4 CA Lic. # NV Lic. #059578

2 Table of Contents Our Promise Lifesource Is A Company You Can Depend On Our Promise...2 Introduction to ScaleSolver...3 What to Expect...4 Good Practices...5 & 6 Equipment Specifications...7 LifeSource is a family owned and operated company, founded in We produced the first Whole House Water System and we pride ourselves on our excellent customer service. Unlike dealers, we provide our customers with a fully staffed, dependable serve department to help with everything from system installation to questions related to your water quality. This guide is filled with many helpful tips and reminders. It will help you to better understand what you can expect, in the first days, as your ScaleSolver system works to descale your home. Welcome to the LifeSource family! A Note To Your Plumber...8 Warranty Review...9 & 10 LifeSource Referral Program Share the Love by recommending LifeSource to your friends, family... ANYONE! They will receive $100 off their system and once the purchase has been made, LifeSource will send you a check for $100. Yes, it s that simple! 2

3 Introduction ScaleSolver 5544 What To Expect And Quick Facts What to Expect Things To Consider And Other Cautions LifeSource ScaleSolver with PowerTAC is a high efficiency Template Assisted Crystallization (TAC) scale prevention system for homes and businesses. ScaleSolver systems do not add anything to water and retain the healthy and beneficial minerals such as calcium and magnesium. A ScaleSolver physically conditions the healthy hardness minerals, converting them into harmless, microscopic crystals that do not buildup in household water appliances, fixtures, pipes and water heaters. Mineral deposits on countertops and faucets will easily wipe off without special treatment. Your First Days Faucet aerators may plug occasionally as old scale is removed from your plumbing system and water heater. Using ScaleSolver With Other Water Treatment Equipment Due to the unique properties of ScaleSolver, there are requirements for using the ScaleSolver system. 1. The ScaleSolver system works best when paired with the LifeSource water filtration unit. A whole house water filter removes harmful chemicals that can reduce the service life of the ScaleSolver media. 2. ScaleSolver must be the final stage in the treatment chain. Do not install filters after ScaleSolver or before any devices for which scale prevention is required. POU filters, e.g. carbon or R.O. are exempt from this requirement. 3. Do not apply phosphate or any other antiscalant before or after the ScaleSolver system. After your system has been installed, you may see cloudy water. This is from air bubbles or descaling. We recommend that you allow the water to run for at least minutes, at each faucet, to eliminate the problem.! CAUTIONS ScaleSolver Quick Facts The ScaleSolver unit provides chemical and salt-free scale prevention. The ScaleSolver unit does not add anything to water, and is safe for drinking and cooking. The ScaleSolver unit is highly recommended for tankless water heaters. Descales exisiting buildup in pipes, fixtures and water heaters. No electricity, no wastewater - the ScaleSolver system is completely self-contained. Beneficial minerals retained for healthier drinking water. Improves the efficiency of appliances that use water. Safe for landscaping and irrigation. Do not let the system freeze. Damage to the tank may be a result. System must be operated in a vertical position. Do not lay it down during operation. The system may be placed in any position during shipping and installation, but must be operated in the vertical position. Place the system on a smooth, level surface. Because the system operates in an UP-Flow, fluidized bed mode, having a level surface is important. A bypass valve should be installed on every system to facilitate installation and service. Observe all local plumbing and building codes when installing the system. Chlorine must not be above 3.0 PPM. A filter is recommended. Copper and other metals must not be above EPA standards for municipal water. 3 4

4 Good Practices Maximizing The Benefits Of Your ScaleSolver System Good Practices Good Practices Continued... The ScaleSolver system will improve the properties of water throughout the home. It s important to keep in mind that the ScaleSolver system is not a water softener. Below are some things to expect, and some recommendations that can maximize the benefits provided by the ScaleSolver system. Sinks and Fixtures - Water spots will be reduced. If water is allowed to evaporate off a surface, small spots may be left behind. If wiped off frequently, water spots should not require any more than a wet cloth or sponge to remove. No harsh chemicals should be required, as is typical with hard water spots. Within the first days of having the ScaleSolver system installed, we recommend checking all faucet screens for excess scale particles. Dishwasher - Water spots on dishes and on the surface of the dishwasher should be greatly reduced. We recommend immediately reducing the amount of dishwashing detergent after installation. Using dishwashing detergents that are low in phosphates are better for the environment and reduce water spots. Citric acid or Lemi Shine can help reduce water spots and will aid the ScaleSolver system in clearing scale buildup from dishwashers. The use of dishwashing pods are not recommended. They include more than the suggested amount of soap per load. Shower Doors and Tiles - Water spots will be reduced. When water evaporates off a surface, small spots may be left behind. These spots should be easy to remove with a damp cloth or sponge. In very hard water areas, treating the shower glass with Rain-X glass cleaner will further reduce cleaning requirements. Bath - Soaps and shampoos will lather more than with untreated water. Soaps and shampoos will also rinse off much easier without the slippery feel that is normally associated with soft water. We recommend the use of low phosphate soaps. Water Heater - We recommend draining water heaters at least days after installation. This is a good practice that can dramatically increase the life of water heaters. Once cleared, the ScaleSolver system will help keep the tank and other heating appliances free of scale and operating at peak efficiency. Laundry will also require the use of less detergent. The use of detergent pods are not recommended when using a LifeSource System. 5 6

5 Equipment Specifications ScaleSolver 5544 S & E System Overview A Note To Your Plumber Tips And Important Reminders To Ensure Your Water Flow Is Not Interrupted Both the ScaleSolver 5544 S & E are complete, self-contained and ready to use. A simple inlet and outlet connection is all that is required for installation. Specifications SS S Inlet Connection 1 PVC Union with Socket Outlet Connection 1 PVC Socket SS -5544E Inlet Connection 1 1/4 PVC Union with Socket Outlet Connection 1 1/4 PVC Socket The following applies to both the 5544 S and E tanks. Dimensions x 10 Max. Flow Rate 20 gpm Max. Temperature 140 F (37.8 C) Max. Pressure 100 psi In-Service Weight 140 lbs. Dry Weight 35 lbs. We recommend that customers share this page with any plumber doing work in the home. The following notes will ensure that service from your LifeSource system isn t accidently interrupted. This system requires a full bypass to allow for a service flow to be routed around the system as needed for servicing. A dual-union ball-valve is used on the inlet and outlet to isolate the tank for servicing. The ScaleSolver unit operates in the UPFLOW mode which is opposite of a conventional softener. Both the inlet and outlets are clearly marked on tank. The ScaleSolver unit with PowerTAC is recommended by most tankless water heater manufacturers. Schedule 80 nipples recommended for inlet and outlet. Bypass Valve Operation IN Service Position Bypass Position 10 *For more in-depth installation or service questions please call the LifeSource factory at ScaleSolver shown in IN SERVICE position 8

6 Installation Instructions Elite System Installation and ScaleSolver Setup Installation Instructions Elite System Installation and Filter Setup The ScaleSolver system works best when paired with the LifeSource Whole-House Water Filter. When installing a ScaleSolver and LifeSource filtration unit, the ScaleSolver must be the final unit in the treatment chain. The following are instructions on how to properly set up and install a 1620 Filter and 5533 ScaleSolver. 1620S Filter Setup 1. Turn the front dial on the control valve towards the backwash setting. 2. Switch the lever at the back of the control valve from bypass to service. 5544S ScaleSolver Setup 1. Put both the 5544S ScaleSolver and 1620 filter on bypass before you begin. Elite System: 5544S ScaleSolver & 1620S Filter 3. Allow the rinse water to run out of the rinse line until the water runs clean. * Follow the start up procedures listed in your Filter Installation and Operations Guide to complete this process. 2. Pay close attention to the direction of the arrows on each valve. 3. Turn on the water and check for leaks. 4. Always begin with the ScaleSolver by opening up the inlet valve first and then the outlet valve. 5. As the ScaleSolver fills with water, allow cold water to run through a faucet or hose bib to release air from tank. IN (1 ) OUT (1 ) OUT (1 ) IN (1 ) RINSE LINE TOP VIEW OF SCALESOLVER AND FILTER IN (1 ) OUT (1 ) OUT (1 ) IN (1 ) RINSE LINE 6. Water exiting faucets may be white, allow water to run until clear. This takes approximately minutes Shut off faucet and place ScaleSolver on bypass before setting up the filtration unit. * Make sure to place the ScaleSolver on a smooth, level surface. Because the system operates in an UPFLOW, fluidized bed mode, having a level surface is important ScaleSolver Filter 9 10

7 Warranty Review Warranty Details and Limitations Warranty Review Summary Of Conditions, Testing And Regulatory Approvals Warranty Details LifeSource Water Systems, Inc. warrants the ScaleSolver system as follows: The ScaleSolver system (including the tank, media and valve head) is warrantied for performance for a period of three years from the date of the original installation. The ScaleSolver warranty is four years when installed in conjunction with a LifeSource Water System in the proper configuration. Limitations Our obligation under this warranty, with respect to the tank or valve, is limited to furnishing a replacement for, or at our option, repairing any part or parts to our satisfaction that prove defective within the warranty period stated above. Such replacement parts will be delivered to the owner F.O.B. nearest factory, at no cost, excluding freight and local labor charges, if any. Our obligation under this warranty, with respect to the ScaleSolver media, will be limited to furnishing a replacement for the media within three years from date of original installation. Such replacement media will be delivered to the owner F.O.B. nearest factory, at no cost, excluding freight and local labor charges, if any. Damage to the media due to chlorine, other oxidizers or fouling or any other operation outside of the limits shown under Specifications, is not covered by this warranty. LifeSource Water Systems, Inc. shall not be liable for freight, handling or labor charges, or consequential damages. A complete warranty can be found at the following web address: Conditions The ScaleSolver must be installed and serviced by an authorized LifeSource Water Systems, Inc. dealer or other entity approved by LifeSource Water. Any component failure must not result from abuse, fire, freezing or other acts of nature, violence, or improper installation. Equipment must be installed and operated in compliance with the local plumbing codes, EPA regulated and LifeSource approved well water. Equipment is limited to use at water pressures not to exceed 100 PSI. Water supply must not exceed 3.0 PPM chlorine. For water supply exceeding 3.0 PPM chlorine, pretreatment is required. A LifeSource whole house water filter is recommended. Water must not contain copper and other metals in excess of EPA guidelines for municipal water. Defective parts are subject to inspection by either LifeSource Water Systems, Inc. or any authorized representative before final commitment of warranty adjustment is made. LifeSource Water, Systems Inc. reserves the right to make changes or substitutions in parts or equipment with material of equal quality or value. Testing and Regulatory Approvals The ScaleSolver system is tested and certified to NSA/ANSI Standard 61. PowerTAC tested at Arizona State University using the German DVGW-W512 test protocol. *German Technical and Scientific Association for Gas and Water