Care and. Cleaning. Guide

Transcription

1 Care and Cleaning Guide

2 Quick Guide Luxaflex Window Fashions are designed to require minimal care and maintenance. All homes are different with varying levels of care and cleaning required. To ensure your window coverings maintain their appearance to the highest standard, we have put together this simple care and cleaning guide to help you with routine maintenance and additional care recommendations. If you are ever in doubt or have any questions, please contact the Luxaflex dealer from whom you purchased. The following table is designed to help you select the best method for routine maintenance and deep cleaning of your Luxaflex Window Fashions. Please refer to the following pages of this Care and Cleaning Guide for more detailed advice. Luminette Privacy Sheers All fabrics except Valencia Charmeuse Satin Metallic Shantung Cotton Silhouette Shadings All fabrics except Bon Soir * Brio Bon Soir * Brio French Linen Bon Soir * Matisse Collection Bon Soir * Matisse Collection Chateau Myst Fabric covered Headrail NOTE: Do not use electrostatic cleaning wipes on any Silhouette Shadings Duette Shades All fabrics except Elan * Myst Ménage Translucent/Blockout * India Silk Panache * Verve All Blockout Fabrics Aurora Fabric covered headrail * Pirouette Shadings All products Modern Roman Shades All Fabrics * CAUTION: Do not use ultrasonic cleaning, injection/extraction cleaning or steaming on headrail, midrail or bottom rail. Roller Blinds, Panel Glide, Roman Shades and Vertical Blinds All fabrics except Neotec Soltec Greenscreen Balance Timber Shutters All Products * PolySatin Shutters All Products Country Woods Venetians All products * Wood Essence Blinds All Products Aluminium Venetians All Products Hand-Held Vacuuming Compressed Air Hair Dryer (Cool Setting) Bathtub Cleaning /Water Immersion Ultrasonic Cleaning Injection/ Extraction Cleaning Steaming * Dry method only For wet method, specify that no chemicals are to be used (water only) Do not immerse headrail in solution 2 luxaflex.com.au 3

3 Luxaflex Luminette Privacy Sheers Luminette fabrics are 100% polyester, making them resilient, anti-static and dust resistant. Periodic cleaning is recommended to help keep your Luminette Privacy Sheers looking like new. For all cleaning applications, fabrics should remain hanging to minimise handling, wrinkling, or puckering. Use a feather duster for regular light dusting. Vacuuming For more thorough dust removal, a hand-held vacuum with low suction may be used. When vacuuming, avoid pulling or stretching the fabric. Start in the upper left corner and work across the fabric using short horizontal strokes while steadying the fabric with your free hand. Each stroke should be approximately the width of two to three vanes. Do not use long horizontal or vertical strokes, as these actions will crease the fabric. Continue to the bottom of the fabric. CAUTION: Do not use a brush attachment or rigorous vacuuming since either could distort the fabric. To reduce the potential for permanent staining, spots should be treated and cleaned as soon as possible with a clothing stain pre-treatment solution. 1. Apply the pre-treatment solution to a clean, white cloth. 2. Support the fabric from behind using another clean, dry cloth. Clean the spot using a gentle blotting action. Avoid rubbing the fabric since any abrasive action may cause it to distort. 3. Let the area air dry. 4. After the area is dry, remove excess solution by blotting it with distilled or bottled water applied to another clean cloth. Wrinkle and Crease Removal The steaming methods described below can be used to help minimise hard wrinkles or creases. Hand Method 1. Rotate vanes to the fully opened position. 2. Apply warm distilled or bottled water to a clean, white cloth. 3. Support the fabric from behind using another clean, dry cloth. 4. Blot the wrinkle or creased area with the wet cloth. 5. Let the area air dry. Steam Machine Method 1. Rotate vanes to the fully opened position. 2. Steam from the back side of the fabric whenever possible. Set the steamer to its lowest possible setting, not to exceed 100 C. 3. The steaming unit should never directly touch the fabric. Hold the wand 50mm to 75mm away from the fabric. 4. Use slow, continuous vertical movements. Begin at the top of the fabric and work your way down. 5. Let the area air dry. For deep cleaning, both injection/extraction and ultrasonic cleaning methods are recommended. Many professional blind cleaning companies offer this in selected regions. Contact your Luxaflex store of purchase to find out if this is available in your area. Softrak headrail system IMPORTANT: Disposable gloves should be worn when handling fabrics. Keep all cleaning solutions away from the Softrak headrail system. Never immerse the headrail. Do not use electrostatic cleaning devices on any Luminette product. Do not dry clean Luminette fabrics. 4 luxaflex.com.au 5

4 Luxaflex Silhouette Shadings Silhouette Shadings are made of 100% polyester, which means they are inherently durable and resilient. However, care must be taken to avoid wrinkling the fabric, particularly where the vanes meet the sheer facings. Regular light dusting with a feather duster is all the cleaning needed in most circumstances. Vacuuming Use a low suction, hand-held vacuum for more thorough dust removal. Compressed Air/Hair Dryer (Cool Setting) Use compressed air or a hair dryer on a cool setting to blow dust and dirt off shades. Spot clean the headrail using a sponge or delicate cloth, cool distilled water and a mild soap solution; handle with care as you would any fine fabric. Only available with Matisse Collection, Chateau, Brio, Myst and French Linen. Ultrasonic Cleaning Silhouette Shadings can be ultrasonically cleaned by a professional, with the exception of Bon Soir, Chateau, The Matisse Collection, The Matisse Collection Bon Soir, Myst and Brio. Specify that a mild detergent solution be used. Never immerse the headrail in the solution. Allow the shading to dry in the completely lowered position. Injection/Extraction Silhouette Shadings can be professionally cleaned using the injection/ extraction method. Contact your Luxaflex store of purchase to find out if this is available in your area. IMPORTANT: Gold Radiance, Silver Reflection, Bronze Shimmer, and Champagne Shine hardware finishes can be spot cleaned with lukewarm water and a gentle soap. Do not use alcohol, baby wipes or alkaline cleansers. These may stain or destroy the finish. Do not use electrostatic cleaning wipes on any Silhouette Shadings. 6 luxaflex.com.au 7

5 Luxaflex Pirouette Shadings Pirouette Shadings are made of 100% polyester, which means they are inherently durable and resilient. However, care must be taken to avoid wrinkling the fabric, particularly where the vanes meet the sheer backing fabric. Regular light dusting with a feather duster is all the cleaning needed in most circumstances. Vacuuming Use a hand-held vacuum with low suction for more thorough dust removal. Spot clean with a damp cloth using a mixture of water and mild detergent. Ultrasonic Cleaning Some Pirouette fabrics can be ultrasonically cleaned by a professional. CAUTION: Do not ultrasonically clean Valencia, Charmeuse, Satin Metallic, or Shantung fabrics. Specify that a mild detergent solution be used. Never immerse the headrail in the solution. Allow the shading to dry in the completely lowered position. Injection/Extraction Most Pirouette Shadings can be professionally cleaned using the injection/extraction method. Contact your Luxaflex store of purchase to find out if this is available in your area. CAUTION: Do not use the injection/extraction method of cleaning on the Cotton fabric. IMPORTANT: Do not steam Pirouette fabrics. Do not use electrostatic cleaning devices on any Pirouette Shadings. 8 luxaflex.com.au 9

6 Luxaflex Duette Shades Duette Shades are made of anti-static, dust-resistant fabric which repels dirt and dust. For most Duette fabrics, the following cleaning options are available. Regular light dusting with a feather duster is all the cleaning needed in most circumstances. Vacuuming For more thorough dust removal, vacuum gently with a brush attachment. Compressed Air/Hair Dryer (Cool Setting) Use compressed air or a hair dryer on a cool setting to blow dust and dirt off shades. 1. Prepare a solution of warm water and a mild detergent. 2. Dampen a clean cloth in the solution and wring it out. 3. Dab the spot with the dampened cloth until it is removed. Do not rub the fabric. 4. Allow the shade to dry in the completely lowered position. Bathtub Cleaning/Water Immersion 1. Immerse the shade in a basin or bathtub filled with warm water and a mild detergent. 2. Rinse with clean water. 3. Before removing from the rinse water, fully raise the shade and tilt it to allow excess water to drain off. 4. Dry the shade completely in the completely lowered position. CAUTION: Do not immerse Elan, India Silk, Myst, Panache, Verve, Ménage and all blockout fabrics. Ultrasonic Cleaning Some Duette fabrics can be ultrasonically cleaned by a professional. Specify that a mild detergent solution be used. CAUTION: Never immerse the headrail into the solution. Dry the shade completely in the lowered position. CAUTION: Do not ultrasonically clean Myst, room-darkening fabrics, or fabric-covered headrails. Injection/Extraction Cleaning This type of professional cleaning injects a cleaning solution into the fabric and extracts the dirty solution in the same motion. Contact your Luxaflex store of purchase to find out if this is available in your area. Use only the dry method of injection/extraction for Architella Elan, Ménage and Panache or fabric-covered headrail. If using injection/extraction for Aurora fabrics, specify that no chemicals are used (water only). IMPORTANT: Do not vacuum Elan, Myst and Ménage translucent and blockout fabrics. Do not spot clean Elan, Myst and Ménage fabrics; or the fabric covered headrail. 10 luxaflex.com.au 11

7 Luxaflex Modern Roman Shades Modern Roman Shades are made with anti-static, dust-resistant fabrics that repel dirt and dust. For most fabrics, the following cleaning options are available. Regular light dusting with a feather duster is all the cleaning needed in most circumstances. Vacuuming Use a hand-held vacuum with low suction for more thorough dust removal. Compressed Air/Hair Dryer (Cool Setting) Blow dirt and debris from within the fabric folds using clean, compressed air. 1. Prepare a solution of warm water and mild detergent. 2. Dampen a clean cloth in the solution and wring it out. 3. Place a clean, dry cloth behind the spot between the face fabric and the back fabric. 4. Dab the spot with the dampened cloth until it is removed. Non oilbased baby wipes may be used on more stubborn stains. Do not rub the fabric. 5. Allow the shade to dry in the completely lowered position. Steaming Steam the face fabric from the bottom to the top, making sure to get steam under each fabric fold. Be careful not to saturate the fabric with steam. Allow the shade to dry completely before raising it. CAUTION: Do not steam the headrail, middle rail or bottom rail fabric. Ultrasonic Cleaning Modern Roman Shades can be ultrasonically cleaned by a professional. Specify that a mild detergent solution be used. Never immerse the headrail into the solution. Allow the shade to dry in the completely lowered position. CAUTION: Do not ultrasonically clean the headrail, middle rail or bottom rail fabric, or any room-darkening fabrics. Injection/Extraction Cleaning Modern Roman Shades can be cleaned by a professional using the injection/extraction method. Contact your Luxaflex store of purchase to find out if this is available in your area. Specify the dry cleaning method only. Pretreat heavy stains. Allow the shade to dry in the completely lowered position. CAUTION: Do not use the injection/extraction method of cleaning on the headrail or bottom rail fabric. 12 luxaflex.com.au 13

8 Luxaflex Fabric Collection Combining high quality textiles with innovative operating systems for easy maintenance, the Luxaflex Fabric Collection includes: Roller Blinds, Roman Shades, Vertical Blinds and Panel Glide. Luxaflex Fabric Collection fabrics are treated with a protective anti-static coating, making the fabric less susceptible to dirt and dust build-up than normal cloth. However, it is recommended that any stains should be removed without delay. Periodic cleaning is recommended to help keep the blinds looking like new. Surface dust may be removed with a gentle brush, feather duster or clean dry cloth. It is recommended that stains and spills are attended to promptly. Simply wipe the fabric with a sponge and lukewarm water. If marks are still visible, add a little mild detergent and gently dry with a clean cloth. For removal of dirt and grime, an art gum rubber is excellent for cleaning small marks. Many Luxaflex fabrics are treated with DURAGUARD Fabric Protector and/or Sanitized Antimicrobial Protection, which help resist liquid stains and protect against the development of mildew and bacteria. 14 luxaflex.com.au 15

9 Luxaflex Woods Collection Luxaflex Timber Shutters and Country Woods Venetians are made of quality timber and require minimal regular cleaning. Dust can be easily brushed off using a clean dry cloth, a feather duster or a vacuum cleaner with brush attachment. To dust or vacuum, tilt the louvre up and then down, (but not entirely closed) to reach the entire top and bottom surface of the louvres. Dirty louvres can be cleaned with a damp cloth. Chemical based cleaning products are not recommended. Do not allow a lot of water to come into contact with the timber. Although the timber is coated, water can cause the louvres to warp, bow or twist, stains to occur or the paint/lacquer to peel. Do not use a damp cloth when cleaning. Damage caused by water is not covered under warranty. Luxaflex Woods Collection shutters and blinds are a natural product and over time will age from the effects of the sun. Handy Tip When cleaning any window, spray glass cleaner on a cloth rather than spraying directly on the window. This will prevent damage to the wood finish by splattering the cleaning solution. Luxaflex Aluminium Venetian Blinds Aluminium Venetians are made from a durable and flexible bounceback aluminium that is resistant to abrasion, peeling, scratching, dulling and discolouration. Dust can be easily brushed off at regular intervals using a clean soft cloth, a feather duster (recommended) or by using a vacuum cleaner with a brush attachment. To dust, tilt the slats up and then down (but not entirely closed) to reach the entire surfaces. To vacuum, use the brush attachment and tilt slats as above. Slats may be wiped over with warm water and a mild detergent. You can also have your blinds cleaned by a professional cleaning service which uses ultrasonic cleaning technology. 16 luxaflex.com.au 17

10 Luxaflex PolySatin Shutters PolySatin Shutters are made from a non-toxic polyresin compound, making them durable and virtually maintenance-free. Dust can be easily brushed off using a clean dry cloth, a feather duster or a vacuum cleaner with brush attachment. Permanent marker, ink, crayon and other staining agents do not hold to the smooth PolySatin surface, making cleaning the shutters easy. To remove stains, simply wipe with a sponge and lukewarm water. Hinged models feature a two-part hinge system allowing the shutter panels to be easily removed from the window within seconds, and reinstalled without needing a manual. You can even take the shutter outside and hose clean! Luxaflex Wood Essence Blinds Wood Essence Blinds combine the look of real wood with the quality and durability of advance technology that is resistant to discolouration and warping. Dust can be easily brushed off using a clean dry cloth, a feather duster or a vacuum cleaner with brush attachment. To remove stains, simply wipe with a sponge and lukewarm water. IMPORTANT: Do not immerse the headrail in water. 18 luxaflex.com.au 19

11 Luxaflex Fabric Awnings Acrylic, EverScreen and Hunter Douglas Canvas fabrics have been manufactured from the highest quality materials and will give many years of outstanding service if cared for appropriately. Always ensure any electrical connections to the awning are isolated prior to any cleaning. The hardware of the awning is low maintenance. Wipe down with a damp cloth as necessary to remove any dirt or dust. Avoid rolling up the fabric awning when wet. Roll up style awning should be retracted in rain or storm conditions. If rolled up wet, the awning should be extended and allowed to dry once the weather clears. Failure to take this action will encourage algae, mildew or other fungal growth, that will not be covered under your product warranty. Avoid pools of water laying on the fabric or leaving the awning extended in the rain, as failure to do so will accelerate some leaching of chemicals, reducing mould and mildew resistance. Do not allow dirt, dust, grime, leaf litter and bird matter to remain on the fabric (as this provides a perfect medium for bacteria to proliferate). Cleaning should be carried out by light sponging with warm water and a mild natural soap. Rinse thoroughly to remove soap. Do not scrub the fabric. Hosing the fabric occasionally on a hot day is also beneficial to the appearance of the fabric as it removes dust and grime and minimises the development of algae, mildew or other fungal growth. Do not use soap powder, concentrated soaps or detergents, nor cleaning fluids. Keep insecticides, solvents and fuels away from the awning. Occasionally extend the awning fully down to even out the material, particularly if the awning is usually set in one position. Should mildew spots develop on the fabric, there are numerous products available at outdoor/camping stores that can be used. Mildew removers are primarily bleach-based and manufacturer s instructions must be followed. In applying these products the following general tips are given: (a) Treat the awning in situ i.e. as it sits fully rolled down. (b) Apply the solution to the fabric liberally (using a sponge mop is ideal). Care should be taken to protect gardens from the solution run off, which will kill plants it comes in contact with. (c) A second application of mildew remover may be applied if desired. However, obstinate mildew stains may remain. (d) ALWAYS follow steps (a), (b) and (c) with a water proofing application. Awnings exposed to coastal environments and salt spray should be washed down regularly. Salt build up can be very corrosive and salt damage is not covered in your warranty. 20 luxaflex.com.au 21

12 Luxaflex Metal Awnings Luxaflex Metal Louvres and Fixed Metal Awnings are coated for enhanced durability and protection against environmental effects. They are relatively low-maintenance, but cleaning your awnings from time to time will help to keep them looking new. Simply hose down the awning and sponge it with a mild solution of natural soap in lukewarm water to remove dirt. Rinse thoroughly. Awnings exposed to coastal environments and salt spray should be washed down regularly. Salt build up can be very corosive and salt damage is not covered in your warranty. Luxaflex Aluminium Shutters Luxaflex Aluminium Shutters are made from high-grade aluminium and are low-maintenance and durable. We recommend cleaning your aluminum shutters every six months. Wipe over the shutters using a nonabrasive cloth or sponge with warm soapy water. A garden hose can be used applying the same principles. Concentrate on the areas where the stainless steel hardware is attached to the shutter. Remove any salt residue, tannin stains caused by trees and other marks created. On completion of the cleaning process, spray a light film of silicone lubricant to any operational hardware such as the tracking system. Ensure these areas are fully dry prior to this application. For shutters installed in premises close to coastal or saltwater environments the following cleaning timeframes are recommended. Proximity Direct beach front 1km radius 10km radius Cleaning frequency Weekly Monthly Quarterly Luxaflex Canopy Awnings See the fabric awnings section on page 21 to follow instructions for fabric care. Wash the awning frequently to maintain its appearance. Lubrication of the hinges with WD40 or similar water repellent lubricant three or four times each year is advisable. Awnings exposed to coastal environments and salt spray should be washed down regularly. Salt build up can be very corrosive and salt damage is not covered in your warranty. 22 luxaflex.com.au 23

13 Care and Cleaning Guide The information and advice included in this Care and Cleaning Guide has been prepared with care. However, we are unable to accept responsibility for the results of or any damage caused by cleaning. Batteries should be checked and replaced at regular intervals subject to frequency of blind use. Never leave flat batteries in a blind or remote control. Acid leaking from batteries is not covered in your warranty. As with all textiles, Luxaflex fabrics are subject to some variations. Slight wrinkling, puckering, or bowing is inherent in textile products and should be considered normal, acceptable quality. Precautions should be taken to reduce exposure to harsh environmental elements, such as salt air. Continuous exposure through open windows and doors will accelerate the fabric deterioration. Additionally, there will be slight differences in pattern alignment from the fabric on the rails to the fabric of the shade, which do not detract from the product s appeal. Variations in colour and/or pattern irregularities are unique characteristics that contribute to the classic beauty of a shade. Sanitized and the Sanitized symbol are trademarks of SANITIZED AG, Switzerland, registered in numerous Countries. Copyright 2016 Hunter Douglas Limited [ABN ]. Registered Trade Marks of Hunter Douglas. C14282_ luxaflex.com.au