IF: ARE HOT FAILURE TO COMPLY RISKS INJURY ILLUSTRATED PARTS CATALOG

Transcription

1 SINGLE SH.50 &.75 GALLON FUNNEL CONTENTS ARE HOT CAUTION DISCARD DECANTER IF:. CRACKED. SCRATCHED. BOILED DRY. HEATED WHEN EMPTY. USED ON HIGH FLAME. OR EXPOSED ELECTRIC ELEMENTS FAILURE TO COMPLY RISKS INJURY PN: BUNN-O-MATIC CORPORATION!! CAUTION HOT WATER ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 227 SPRINGFIELD, ILLINOIS PHONE: (27) FAX: (27) A 6/2 202 Bunn-O-Matic Corporation

2 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. ( BUNN ) warrants equipment manufactured by it as follows: ) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- year parts and year labor. 2) All other equipment - 2 years parts and year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for years. b) Compressors on refrigeration equipment - 5 years parts and year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes first. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer ) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (27) or by writing to Post Office Box 227, Springfield, Illinois ; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and ) receiving prior authorization from BUNN that the defective equipment is under warranty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX- PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either ) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. 92, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, imix, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee. com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, Velocity Brew, A Partner You Can Count On, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Nothing Brews Like a BUNN, Pouring Profits, Signature Series, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation

3 TABLE OF CONTENTS Base - Trunk - Hood - Covers & Panels...4 Digital Brew Control...0 Dispense Valve and Sprayhead...24 Electrical Controls & Ready Light...0 Faucet (First Type)...26 Faucet (Second Type)...28 Funnel...4 Numerical Index...6 Strainer/Flow Control - Solenoid & Lines (Without Backflow Prevention)...6 Strainer/Flow Control - Solenoid & Lines (With Backflow Prevention)...20 Tank and Mounting Brackets...4 Tank Heater & Overflow Protection Devices...2 Triple Set Timer & Thermostat...8 Water By-Pass...22

4 ! BUNN BASE - TRUNK - HOOD - COVERS & PANELS SINGLE SH.5 &.75 GAL ! CAUTION HOT WATER FUNNEL CONTENTS ARE HOT CAUTION DISCARD DECANTER IF:. CRACKED. SCRATCHED. BOILED DRY. HEATED WHEN EMPTY. USED ON HIGH FLAME. OR EXPOSED ELECTRIC ELEMENTS FAILURE TO COMPLY RISKS INJURY PN: BUNN-O-MATIC CORPORATION 25 Early Models DRIP TRAY KIT 2 24 P5 4

5 ITEM PART NO. QTY. DESCRIPTION Cover, Top (Includes item 2 & ) Cover, Top BLK (Includes item 2 & ) Cover, Top (Includes item 2 & ) (DBC Models) Screw, Truss Head #4-40 x.75" Shield, Insulator Decal, Warning - No Serviceable Parts Clip, J-Type #4-40 BASE - TRUNK - HOOD - COVERS & PANELS Hood W/Decals, 20V (Includes item 6) (.75 Gal Models) Hood W/Decals, 20V (Includes item 6) (.50 Gal Models) Hood W/Decals, BLK 20V (Includes item 6)(.50 Gal Models) Hood W/Decals, 20V (Includes item 6)(.50 Gal Models) Screw, Pan Head #8-2 x.75" Decal, Control Panel, 20V (.75 Gal Models) Decal, Control Panel, 20V (.50 Gal Models) Decal, Control Panel, 20V (.50 Gal Models w/lower Faucet) Decal, Control Panel, 20V (.50 Gal Models w/upper Faucet) Decal, Caution Hot Water (Early Brewers only) Trunk W/Decals (Includes items 9 & 0) Trunk W/Decals BLK (Includes items 9 & 0) Decal, Comply to Plumbing Code Decal, Warning - Electrical Panel W/Decals, Trunk (Includes items 2 & ) (Prior to S.N. SNG004000) Panel W/Decals, Trunk BLK (Includes items 2, 2 & ) Panel W/Decals, Trunk (Includes items 2 & )(DBC Models) Panel W/Decals, Trunk, 20V (Includes items 2 & ) (After S.N. SNG004000) Panel W/Decals, Trunk, 20V (Includes items 2 & ) Screw, Truss Head Locking #6-2 x.75" Schematic (20/208V Brewers) (Prior to S.N. SNG004000)) Schematic (20/208V Brewers) (After S.N.SNG004000) Schematic (20V Brewers with Product # ) Schematic (20V Brewers with Product # , , ) Schematic (20/208V Brewers with DBC) Decal, Caution - Decanter/Funnel Cover, Server Platform Cover, Server Platform Cover, Server Platform BLK Cover, Server Platform BLK Early models Late models Screw, Truss Head Locking #6-2 x.75" * Base Housing, SST 20V * Base Housing, BLK 20V Models with welded server stops not available. Order * Base Housing, SST 20V Housings below Base Housing, SST 20V Base Housing, SST 20V Models with removable server stops Base Housing, BLK 20V Screw, Pan Head #8-2 x.75" (Continued) 5 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

6 ! BUNN BASE - TRUNK - HOOD - COVERS & PANELS (Continued) SINGLE SH.5 &.75 GAL ! CAUTION HOT WATER FUNNEL CONTENTS ARE HOT CAUTION DISCARD DECANTER IF:. CRACKED. SCRATCHED. BOILED DRY. HEATED WHEN EMPTY. USED ON HIGH FLAME. OR EXPOSED ELECTRIC ELEMENTS FAILURE TO COMPLY RISKS INJURY PN: BUNN-O-MATIC CORPORATION 25 Early Models DRIP TRAY KIT 2 24 P5 6

7 ITEM PART NO. QTY. DESCRIPTION BASE - TRUNK - HOOD - COVERS & PANELS Cover, Bottom (20V, 200V & 20V models) Cover, Bottom (20V models with Main Power Switch) Cover, Bottom (20V models with Black Decor) Screw, Pan Head #8-2 x.75" Leg, 4.0" Plastic Pad, Anti Skid See item Guide Rail Guide Rail (Models with Black Decor) Nut, Keps # Plate, Tank Mounting Screw, Pan Head #8-2 x.75" Plug, Hole.50" Dia SST (Not used on Brewers W/Lower Faucet) Plug, Hole.50" Dia BLK (Not used on Brewers W/Lower Faucet) Wire Grill, Drip Tray Drip Tray W/Pads (Includes item 29) Pad, Adhesive.0" Dia Decal, Timer Setting Decal, Individual Circuit Info (20V models) Plate, Server Stop Plate, Server Stop (Black Decor models) Screw, Truss Head #6-2 x.75" Screw, Truss Head BLK #6-2 x.75" Late Models only Decal, Main Switch (Models with Main Switch only) Drip Tray Kit (Includes items 22, 2 & 24) (Optional for.5 gallon brewers) Leg Kit (Includes 4 each of items 7 & 8) (Not illustrated) 7 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

8 J J2 SET LOCK BUNN TRIPLE SET TIMER & THERMOSTAT SINGLE SH.5 &.75 GAL BUNN-O-MATIC MINUTES MINUTES MINUTES P/N VAC First Type 2 TL5 TL4 TL TL2 TL 4 LOCK SET Replacement Part P06 8

9 ITEM PART NO. QTY. DESCRIPTION Bracket, Component Mounting Screw, Pan Head #8-2 x.75" Spacer, Nylon.75" Timer, Triple (20/208V & 20/240V Models)(No Longer Available. Order Item 9) Timer, Triple (200V & 240V Models) (No Longer Available. Order Item 0) Timer, Digital 20V Timer, Digital 240V Screw, Truss Head #6-2 x.75" (Not used with Digital Timer) Lockwasher, External Tooth # Screw, Truss Head #6-2 x.75" Thermostat Assy (Includes item 5 & 7) Screw, Pan Head #8-2 x.75" (Mounting) Screw, Binding Head #8-2 x.250" (Terminals) Grommet, Thermostat Control Board, Level, 20V Control Board, Level, 20V Screw, Pan Head #8-2 x.75" Lockwasher, External Tooth # Knob, Thermostat TRIPLE SET TIMER & THERMOSTAT Noise Suppressor (Not used with Digital Timer) Timer Kit, Digital 20V (with Adapter) Timer Kit, Digital 240V (with Adapter) 9 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

10 BUNN DIGITAL BREWER CONTROL ASSMBLY 2 SINGLE SH.5 &.75 GAL ! BUNN Digital Brewer Control Covered under Patent 5,75,508. One or more other patents may be pending. CAUTION DO NOT Turn Tank Heater Switch "ON" Until Water Tank(s) Is/Are Full! Tank Heater Switch Off On! WARNING HAZARDOUS VOLTAGE DISCONNECT FROM POWER SOURCE BEFORE REMOVING! P086 0

11 ITEM PART NO. QTY. DESCRIPTION DIGITAL BREWER CONTROL ASSMBLY Bracket, Mounting Nut, Keps # DBC Display Assembly Screw, Pan Head #6-2 x.2" Sensor, Temperature Clamp, Steel.2"/.9" Screw, Truss Head #6-2 x.75" Nut, Keps # Terminal Grommet, Silicone - Temperature Sensor Bracket, Component Mounting Screw, Pan Head #8-2 x.75" DBC Power Board Assembly (Includes item 2) Screw, Pan Head #8-2 x.75" Receptacle, Display Screw, Truss Head #6-2 x.75" Nut, Keps # Spacer, Nylon.75" Bracket, Mounting Screw, Truss #6-2 x.75" Nut, Keps # Fuse, AGC 5 AMP 250V Grommet, Silicone.47" I.D. * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

12 BUNN TANK HEATER & OVERFLOW PROTECTION DEVICES SINGLE SH.5 &.75 GAL Brewers W/Copper Overflow Cup P54 2

13 ITEM PART NO. QTY. DESCRIPTION Thermostat, Limit Nut, Hex # Grommet, Probe Probe Kit (Includes items 4, 5 & 6) Washer,.64" I.D. x.75" O.D Lockwasher, Internal Tooth # Nut, Hex # Tank Heater, 208V (Includes item 8) Tank Heater, 240V (Includes item 8) Tank Heater, 240V (Includes item 8) Nut, Hex # Gasket, Tank Heater Tube Assy, Vent Bracket, Vent Tube Switch Assy, Liquid Level, 20V (Includes items 2, & 4) Switch Assy, Liquid Level, 240V (Includes items 2, & 4) Nut, Hex.25" FPT Gasket, Float Switch (Only used in this application) Washer, Adjusting (DO NOT USE IN THIS APPLICATION) Clip, Spring Overflow Cup Assy Copper (Also replaces aluminum cup) Kit, Overflow Cup (Aluminum) (Includes items 2,8, 20 & 2) Nut, Keps # Clamp, Hose.47"/.54" I.D * Tube, Silicone.2" I.D. x 29" (Order item 28) Washer, Celcon.520 I.D. x.0 O.D Nut, Hex.25 FPT Elbow,.75 Multi Barb Film, Insulating TANK HEATER & OVERFLOW PROTECTION DEVICES Triac/Heat Sink Assy (Includes items 2, 24 & 27) Heat Sink, Copper Triac Assy, 40 Amp Screw, Pan Head #6-2 x.2" Lockwasher, Split #6 Used On DBC Brewer Tube,.75" O.D. x.50" LG U-Channel (Not available - for shipping purposes only) 27 M Heat Sink Compound (Not Illustrated) Tube, Silicone.2" I.D. x 6.0" (Not illustrated) Tube, Silicone.2" I.D. x 60.0" (Not Illustrated) Tube, Silicone.2" I.D. x 20" (Not Illustrated) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

14 BUNN TANK AND MOUNTING BRACKETS SINGLE SH.5 &.75 GAL Early Model Tank P2592 4

15 ITEM PART NO. QTY. DESCRIPTION Bracket, Tank Support (Top) (Early Brewers-not available order ) Bracket, Tank Support (Top) (Late Brewers) Screw, Pan Head #8-2 x.75" Nut, Hex # Lid, Tank Nut, Hex # Gasket, Tank Tank Assy. (Includes item 6) (Early Brewers) Tank Assy. w/drain Tank Assy. w/drain (Late Brewers) Bracket, Tank Mounting (Models without Tank Drain) Bracket, Tank Mounting (Models with Tank Drain) Nut, Keps # Screw, Pan Head 8#-2 x.75" Bracket, Vent Tube (See TANK HEATER & OVERFLOW PROTECTION) Plug, Pipe.25" NPT (Early model tank only. Not used with faucet models) Tube, Silicone.50" I.D. x 6" LG Clamp, Hose.62/.7" I.D Clamp, Shut-off TANK AND MOUNTING BRACKETS Plug, Hose Clamp, Hose-Worm Drive.625"/.75" Models w/tank Drain Tube, Silicone.75" I.D. x 2.0" Tube, Silicone.75" I.D. x 6.0" Tube, Silicone.75" I.D. x 20.0" Not illustrated 5 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

16 BUNN 2 STRAINER/FLOW CONTROL - SOLENOID AND LINES 2 4 SINGLE SH.5 &.75 GAL Solenoid W/.48" DIA COIL 8 7 EARLY MODELS Solenoid W/.0" DIA COIL V Solenoid COIL MODELS WITH STRAINER/FLOW CONTROL GALLON BREWERS P09 6

17 ITEM PART NO. QTY. DESCRIPTION Gasket, Spayhead Tube (Early models) Grommet, Fill Tube (Late models) Tube, Tank Fill (Early models) Nut, Hex # Tube, Tank Fill (Late models) Bushing, Snap.88" Dia. Hole Tube Assy, Solenoid to Tank (Includes Nuts) Bracket, Upper Component Screw, Pan Head #8-2 x.75" Solenoid Valve Assy, 20V -.50" Dia Coil (Without Inlet Screen) Solenoid Valve Assy, 20V -.48" Dia Coil (With Inlet Screen) Solenoid Valve Assy, 20V -.0" Dia Coil Solenoid Valve Assy 200V -.50" Dia Coil Solenoid Valve Assy 20V -.50" Dia Coil (Without Inlet Screen) Solenoid Valve Assy, 240V -.48" Dia Coil (With Inlet Screen) Screw, Pan Head #0-2 x.75" Lockwasher, Split # Solenoid Valve Assy 20V (Includes items 7 & 8) (Early models) Screw, Truss Head #8-2 x.8" Lockwasher, Split # Solenoid Valve Coil, 20V -.50" Dia Solenoid Valve Coil, 20V -.0" Dia Solenoid Valve Coil, 200V Solenoid Valve Coil, 20V (Early models) Solenoid Valve Coil, 20V (Late models) Solenoid Valve Repair Kit -.50" Dia Coil (Includes Plunger, Seal and Spring) Solenoid Valve Repair Kit -.0" Dia Coil (Includes Plunger, Spring and O-ring) Solenoid Valve Repair Kit, 20V (Early models) Solenoid Valve Base -.50" Dia Coil Solenoid Valve Base -.0" Dia Coil (Includes O-ring) Guide -.50" Dia Coil Guide Kit -.0" Dia Coil (Includes Washer & O-ring) Elbow, Male.250" Flare x.25" MPT Tube Assy, Strainer/Flow Control to Solenoid (Brewers W/Strainer/Flow Control) Tube Assy, Bulkhead to Solenoid (Brewers W/O Strainer/Flow Control) Strainer/Flow Control Assy (Includes items 4 thru 9) Flow Control Outlet Flow Control Gasket Flow Washer & Gasket,.500 GPM (Includes item 5) Body (Not available order item ) Screen End Cap STRAINER/FLOW CONTROL - SOLENOID AND LINES Union,.25" FFL x.25" FFL Nut, Hex.48" - 20 Brewers W/Strainer/Flow Control only (continued) 7 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

18 BUNN 2 STRAINER/FLOW CONTROL - SOLENOID AND LINES SINGLE SH.5 &.75 GAL 0 7 Solenoid W/.48" DIA COIL 8 7 EARLY MODELS Solenoid W/.0" DIA COIL V Solenoid COIL MODELS WITH STRAINER/FLOW CONTROL GALLON BREWERS P09 8

19 ITEM PART NO. QTY. DESCRIPTION Lockwasher, Internal Tooth.48" I.D Bulkhead Fitting,.250" Flare Adapter, Hex.25" FPT x.25" MPT Elbow, Union.25" FPT x.25" FFL Coupling, Quick Female W/Shut-off Hose Assembly STRAINER/FLOW CONTROL - SOLENOID AND LINES 28 M Sealant, Pipe 6 ml (Not illustrated) Tube Assy Bulkhead to Supply Union,.250" Male Flare Gasket, Copper (Use as required).75 Gallon Models Only.5 Gallon Brewers Only 9 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

20 BUNN SOLENOID AND LINES (MODELS W/BACKFLOW PREVENTION) SINGLE SH.5 &.75 GAL P429 20

21 SOLENOID AND LINES (MODELS W/BACKFLOW PREVENTION) ITEM PART NO. QTY. DESCRIPTION Grommet, Fill Tube Tube, Tank Fill Tube Assy, Solenoid to Tank (29 ) Tube Assy, Solenoid to Tank (2 ) (Brewers with optional Water Strainer Assembly) Check Valve Gasket, Copper Adapter,.25 NPT Female x.25 MPT Solenoid Valve Assy, 240V (With Inlet Screen) Screw, Pan Head #0-2 x.75" Lockwasher, Split # Sleeve Assy, Solenoid Valve Solenoid Valve Repair Kit (Includes Plunger, Spring and Seal) Solenoid Valve Base (Without Screen) Solenoid Valve Coil, 240V Connector.250 Flare x.25 MPT Connector, Swivel Nut.25 FFL x.25 FFL Strainer Assy, Water (Includes items 5, 6 and 7) * Body (Not available order item 4) Screen End Cap Union.25 FFL x.25 FFL Nut, Hex.48" Lockwasher, Internal Tooth.48" I.D Bulkhead Fitting.250" Flare Tube Assy, Bulkhead to Supply Union,.250" Male Flare Cap (For shipping purposes only) Optional 2 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

22 BUNN WATER BY-PASS 2 SINGLE SH.5 &.75 GAL 4 2 Early Model Tank Valve Repair Kit Late Model Tank P55 22

23 ITEM PART NO. QTY. DESCRIPTION * Tube, Silicone.75" I.D. x 9.50" (Order item 2) (Early model Tank) * Tube, Silicone.50" I.D. x 8.75" (Order item 22) (Late model Tank) Clamp, Hose.59"/.66" I.D Clamp, Hose.62"/.7" I.D Valve Assy, By-Pass 20V Valve Assy, By-Pass 220/240V Nut, Keps # Screw #8-2 WATER BY-PASS Coil Assy, By-Pass Valve 20V Coil Assy, By-Pass Valve 220/240V Bracket (Not available order item 4) Late models. Not available order item Spring (Not available order item 6) Plunger (Not available order item 6) Diaphragm Body (Not available order item 5) * Tube,Silicone.75" I.D. x 2.25" (Order item 4) Valve Assy, Needle By-Pass (.75" Barb) Tube, Silicone.75" I.D. x 2.0" Tube, Silicone.75" I.D. x 6.0" Tube, Silicone.75" I.D. x 20.0" Not illustrated Tube, Silicone.50" I.D. x 2.0" Valve Repair Kit (Includes one each of items 8, 9 & 0) 2 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

24 BUNN DISPENSE VALVE AND SPRAYHEAD SINGLE SH.5 &.75 GAL Early Model Tank P969 24

25 ITEM PART NO. QTY. DESCRIPTION DISPENSE VALVE AND SPRAYHEAD Valve Assy, Sprayhead, 20V (Includes items 2 thru 8) Valve Assy, Sprayhead, 20V (Includes items 2 thru 8) Screw # Coil Assy, Dispensing Valve, 20V Coil Assy, Dispensing Valve, 20V Spacer Plate Spring (Not available order item 7) Plunger (Not available order item 7) Diaphragm Body (Not available order item ) Tee, Run.25" MPTF x.8" x.8" Barb (Early model Tank only) * Tube, Silicone.8" I.D. x 4.50" (Order item 5) (Early model Tank) * Tube, Silicone.75" I.D. x 6.25" (Order item 6) (Late model Tank) Clamp, Hose.59"/.66" I. D. (Early model Tank) Clamp, Hose.9"/." I. D. (Late model Tank) Fitting, Barb.75" x.25" MPT (Early model Tank) Fitting,.25" MPT.28" I.D. (Late model Tank) Nut, Hex.48" Sprayhead Tube, Silicone.75" I.D. x 2.0" Tube, Silicone.75" I.D. x 6.0" Tube, Silicone.75" I.D. x 20.0" Tube, Silicone.75" X 2.0" Not illustrated Valve Repair Kit (Includes one each of items 5, 6 & 7) 25 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

26 BUNN FAUCET SINGLE SH.5 &.75 GAL Early model Tank Early Models Only one Faucet location option (Upper or Lower) is applicable to each Brewer 9 P296 26

27 ITEM PART NO. QTY. DESCRIPTION Faucet Assy (Includes items 2 thru 8)(Early Models) Faucet Assy (Includes items 2 thru 8)(Late Models) Handle, Faucet (See item 22) Bonnet, Faucet FAUCET Spring, Faucet (See item 22) Seat Cup, Faucet (See item 22) * Body, Faucet (Early Models) * Body, Faucet (Late Models) Order item Pin, Spring.25" Dia. x.50" (See item 22) Stem, Faucet (See item 22) Faucet Stem W/Pin (Includes items 7 & 8) Jam Nut, Faucet Adapter, Barb (For early models also order item 2) Washer, sealing (Late models) * Tube, Silicone.8" I.D. x 0.50" (Order item 2) (Early model Tank) * Tube, Silicone.8" I.D. x.75" (Order item 2) (Late model Tank) Clamp, Hose.59" x.66" I.D. Brewers With Upper Faucet Only Fitting, Barb.75" x.25" MPT (Early model Tank only) Elbow, 90.75" Barb x.25" MPT (Early model Tank only) Clamp, Hose.59" x.66" I.D * Tube, Silicone.8" I.D. x 0.0" (Order item 2) (Early model Tank) * Tube, Silicone.8" I.D. x 42.0" (Order item 2) (Late model Tank) Brewers With Lower Faucet Only Nut, Hex UNF Washer Late Models Washer, sealing (Early models) Tube, Silicone.8" I.D. x 2.0" Tube, Silicone.8" I.D. x 6.0" Tube, Silicone.8" I.D. x 20.0" Not Illustrated Faucet Kit (Includes items 2, 4, 5, 7 & 8) 27 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

28 BUNN FAUCET (Second Type) SINGLE SH.5 &.75 GAL BUNN SAFETY- FRESH P259 28

29 ITEM PART NO. QTY. DESCRIPTION Elbow Tube Heater, Tube Reducer Nut, Jam Lockwasher FAUCET (Second Type) Faucet, Hot Water (Includes items 8 thru 7) Faucet Handle/Stem Assembly (Includes items 9 thru 4) Faucet Handle Kit (Includes item 0) Pin, Spring.25" Dia x.50" Faucet Bonnet Nut Faucet Spring Faucet Stem Faucet Seat Cup Faucet Safety Clip Faucet Aerator Kit Body, Faucet (Not available. Order item 7) Guard w/decals, Faucet (Includes item 9) Screw, Locking BLK #8-2 x.2" Decal, Safety 29 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

30 BUNN 2 ELECTRICAL CONTROLS & READY LIGHT SINGLE SH.5 &.75 GAL Models with Main Power Switch P56

31 ITEM PART NO. QTY. DESCRIPTION Cap, Dust Socket Assy W/Leads, Interface Contactor Assy, 20V Coil Contactor Assy, 240V Coil Screw, Pan Head #0-2 x.75" Light Assy, 20V (Includes item 5) Light Assy, 240V (Includes item 5) Lamp w/leads, LED Green (DBC Models Only)(Includes item 5) Lockwasher M Nut M Terminal Housing, Receptacle Wire nut, Tan (DBC Models Only) Knob, Rotary Switch Switch, On/Off 20V Switch, On/Off 20V CE Switch, Momentary- Start 20V (Prior to S.N. SNG004000) Switch, Momentary-Start 20V (After S.N.SNG004000) Switch, Momentary-Start 20V * Switch Assy, Rotary (20/208 & 20/240V models prior to 09/29/06) (Not available. Order ) Switch Assy, Rotary (20V models and all other models after 09/29/06) * Switch Assy, Rotary (DBC models) (Not available. Order ) Ground Screw 20V W/Terminal Washer #0-2 x.50" Ground Screw 20V, Pan Head Sltd. #0-2 x.50" Lockwasher, Ext.-tooth #0-20V Bracket, Terminal Block Mounting Bracket, Terminal Block Mounting (Models with Main Power Switch) Screw, Pan Head #8-2 x.8" Terminal Block, Pole (RED/WHI/BLK) Terminal Block, 2 Pole (WHI/BLK) Terminal Block, 2 Pole (RED/BLK) Terminal Block, Pole (BLU/BRN) Screw, Truss Head #8-2 x.75" Connector, Cable 20/240V Strain Relief, Cord (20V) Washer, Reducing (20V) Receptacle Assembly, Spring Contact (Includes items 5, 6 & 7) Screw, Flat Head #6-2 x.75" SST Black Housing, Spring Contact Spring ELECTRICAL CONTROLS & READY LIGHT Pin, Contact Washer, Flat Nut, Keps #6-2 - Zinc Pl (Continued) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

32 BUNN 2 ELECTRICAL CONTROLS & READY LIGHT SINGLE SH.5 &.75 GAL Models with Main Power Switch P56

33 ITEM PART NO. QTY. DESCRIPTION Rectifier Screw, Truss Head #6-2 x.625" Circuit Breaker, 4 amp Transformer, 80VA 20/240V Transformer, 80VA 20V CE Screw, Truss Head #6-2 x.75" Nut, Keps # Adapter, Spade ELECTRICAL CONTROLS & READY LIGHT Relay Screw, Truss Head #6-2 x.75" Prior to S.N. SNG Strap, Transformer, Hold Down (Late Models) Screw, Truss Head #6-2 x.75" Terminal Lug (20V) Screw, Pan Head #0-2 x.8" Lockwasher, Ext.-tooth # Decal, Equipotential (20V) Decal, Ground (20V) Switch, Main Power (Not used on all models) Screw, Truss Head #6-2 x.25" (Switch Mounting) Screw, Pan Head #0-2 x.75" Lockwasher, External Tooth #0 The following items are not illustrated: Cord, Power (.75 Gal Models only) Cord, Power (DBC Models only) Cord, Power (20V Models only) Cord Assy, Power (20V Models only)) Wiring Harness, Main (20/240V) Wiring Harness, Main (20V) Wiring Harness, Main (20V) Wiring Harness, Main (20V with Product # ) Wiring Harness, Contactor (240V) Wiring Harness, Contactor (20V) Thermal Cutoff, Contactor Blk 2" (20V CE) Thermal Cutoff, Contactor Red 6" (20V CE) Wiring Harness, Server Contacts (20V) Wiring Harness, Server Contacts (20V CE) Wiring Harness, Relay(Prior to S.N. SNG004000) Wiring Harness, Switch/Transformer)(After S.N. SNG004000) Wiring Harness, Sig DBC (DBC Models Only) Wiring Harness, Power DBC (DBC Models Only) Wiring Harness, Tube Warmer to Transformer (20V) Wiring Harness, Rotary Switch (20V CE) Wiring Harness, Main Power Switch Wiring Harness, Contactor (20V models without Thermal Cut-off) * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

34 BUNN FUNNEL SINGLE SH.5 &.75 GAL OPTIONAL FUNNELS 4 P58

35 ITEM PART NO. QTY. DESCRIPTION Funnel Assy, SST (Includes Items 2 thru 7) Funnel W/Decals (Includes items & 4) Decal, Caution-Remove Funnel Decal, Caution-Hot Liquid Handle, Funnel-Black Screw, Round Head.25" - 20 x.50" Filter Basket (First Type. Not available, order Second Type) Filter Basket W/ Splash Guard (Second Type) Funnel Assy, Plastic-Black (Includes items, 4, 9 & 0) Funnel Assy, Plastic-Smoke (Includes items, 4, 9 & 0) Funnel Adapter, Water by-pass Splash Guard Funnel Assy, Pouch Pack (Includes items 6 & 2 thru 6) Wire Form Insert Funnel W/Decals (Includes items 4 & 5) Decal, Warning-Remove Funnel Decal, Warning-Hot Liquid Handle, Pouch Pack Funnel 5 * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

36 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO ,5, , , , ,, ,9,, , , , , ,7,9,,5,7, ,7, , ,2,25, , , , , , ,2,25, ,2,2,25, ,2,2, ,

37 NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO M M