Integrated Industrial Solutions
|
|
|
- Cameron Moore
- 5 years ago
- Views:
Transcription
1 Integrated Industrial Solutions melschire Automation Technologies LLC Umm Al Quwain UAE, Post Box: Tel: ( ) , Mob: , Fax : ( ) info@melschire.com.
2 Instrumentation Tubes Hydraulic Tubing Gas line Tubing Petro Chemical Tubing Inch & Metric Size Coil & straight Length Sch-10, Sch-20, Sch-40 Available in SS-316, SS-304, Carbon Steel (Seamless Pipe, ERW Pipe), Copper, Brass. Compression Fittings Double Ferrule Fitting Single Ferrule Fitting Compression Adaptor Elbow, Tee, Straight Inch & Metric size NPT,BSP,JIC, Flair Available in SS-316, SS-304, Carbon Steel, MS, Copper, Brass, PE, Teflon. Fitting & Adaptor High Pressure Fittings Hydraulic Fittings Pipe Fittings Test Point Fittings Banjo Fittings Available in MS, CS, SS316, SS304, GI, Brass, Copper, Teflon Material Pneumatic Fittings & Tubes FRL Solenoid Valve Cylinder & Fittings QRC (Ludecke & Milton) One Touch & Push Fitting (Plastic, Metal, Brass) PU Tube PU Spring Coil Nylon Tube Silicon Tube Teflon Tube Inch & Metric Size Vacuum Vacuum Cup in Flat, Bellow, Normal (NBR, SBR, Silicon) Vacuum Generator Vacuum Ejector Vacuum Gage (Dry & Liquid Filled) Fax : ( ) info@melschire.com
3 Hose Hydraulic Hose Steam Hose Chemical Hose Food Hose Sandblast Hose SS Corrugated Hose SS Metallic Hose GI Metallic Hose PVC Green Hose Olive Green Hose Radiator Hose Air Hose Water (suction & discharge) Oil (suction & discharge) Cement Hose Bulk Material Hose SS Braided Teflon Hose Reinforced PU Hose Transparent PU Hose Lay Flat Hose (Mid & HD) Synthetic Fire Hose Duct Hose (PU,Gry,EPDM) Crimping & Assembling Facility (custom made) Jubilee Type Worm Type SBSC Type Stuff Type Single Stuff Type Double Clamps Double Bolt Four Bolt Up to 30mtr Strip Hanging Type Nail Type Available in MS, SS, GI Material Bellows Rubber Expansion Bellows Union Type & Flange Type SS Bellows SS Corrugated Bellows Available in Customer Requirement Couplings & Elements Miller Coupling Shortz Coupling Chicago Coupling Victaulic Coupling Cam Lock Coupling HRC, Lovejoy Fenner, Rotex Grid Coupling Aluminum Coupling Tire Coupling All Coupling Elements & Gasket Available
4 Hydraulic U Seal Guide Ring Road seal Hydraulic Seals Piston Seal V Pack Wiper Seal Available in PU, NBR, SBR, Teflon, Gray Teflon, Silicon, Viton, UHME, Fiber Material O Ring O Ring Cord O Rings Flat Ring X Ring Available in PU, NBR, SBR, Teflon, Silicon, Viton, Material Single Lip Oil Seal Double Lip Oil Seal Oil Seal Closed Type Wiper Type Available in NBR, Silicon, Viton, Metal Type, Teflon Type Water Pump Seal High Speed Pump Seal Chemical Pump Seal Mechanical Seal Rotary Union Seal Grundfose Pump Seal Ebara Pump Seal Available in Ceramic, Carbon, Silicon Carbide, Teflon, SS Silicon Carbide, (we are specialized in custom made) Belt V Belt X Belt SPA, B, C, D Belt Timing Belt HTD Endless Timing Belt H, M, L End Timing Belt T, AT, M, L Food Conveyor Belt Printing Conveyor Packaging Conveyor General Conveyor Specially Fabricated- Conveyor & Timing Belt Available in PU, Canvas, Teflon, Silicon, SS, Rubber Materials in Difference Size and Pitch
5 Valve Ball Valve Gate Valve Globe Valve Butterfly Valve Knife Valve Needle Valve Manifold Valve Mini Valve Available in MS, SS, Brass, Bronze, Teflon, PE Material (also in Motorized, Pneumatic Actuator custom made) Hex Bolt Allen Bolt Machines Screw Nut, Bolt Wings Nut Bolt Lock Nut, Anchore Bolt Tie Bolt Available in MS,SS, CS, Cadmium, Brass, Teflon Material Plate Washer Spring Washer Star Washer Copper Washer Washer, Circlip Internal Circlip External Circlip Snap Rings Aluminum Washer Available in MS, SS, GI, Teflon, Rubber, Silicon Material Ball Bearing Needle Bearing Trust Bearing Pillow Bearing Bearings Tapper Bearing Linier Guide Bearing Ball Screw Bearing Eye End Bearing Available in all Major Brands Gasket, Rubber Mounting Non-Asbestos Gasket Graphite Gasket Metallic Gasket Single Bolt Mounting Double Bolt Mounting As per Sample Mounting Available in Sheet & Any Type of Customer Requirement Melschire Autom mation Technologies LLC Umm Al Quwain UAE, Post Box : Tel : ( )
6 Industrial Automation Project Work & Maintenance Water Treatment Plant Food Processing Plant Petro Chemical Plant Printing Industries Packaging Industries Plastic Industries Wood Industries Hotels and Airport Service Area Custom Related Modification & Fabrication Technical Service Mother Board based Service Integrated Chip (ubga) based PCB Repair Electronic based Modification PLC, HMI based Plant Up gradation Manual, Semi-Auto Machine Up gradation Supervisory data Access Control based Plant Monitoring PC based Plant Supervising with Accounting Inventory
7 Mechanical Solution for Industry Fabrication for Mechanical Parts Modification for Mechanical Parts Fabrication of Gear in Teflon, UHME, Fiber, Brass, MS, SS Fabrication of Conveyor Systems for any type Industry Fabrication of High Pressure Fittings in MS, SS All Type of Mechanical, Engineering, Fabrication, Instrumentation Work Will Be Done Custom made Parts in UHME, Teflon & Silicon Fax : ( ) info@melschire.com
8 Chemical Degreasing, Cleaning, Dismantling Rust-removing Cleaner (very quick action) Universal Lubricant-Degrilube (non-inflammable) Non-Inflammable Safety, Handy Seize Product Orange Releasing Agent WR+: 5 Product Over 1000 Uses Super Industrial Degreaser Orange Solvent Degreaser for Tar, Grease, Oil, Adhesive and Paints Highly Concentrated Detergent Cleaner Food Industry Cleaner Shampoo for Car Body Specially designed for cleaning all type of Rims Liquid Drain Renovator for Pipe unblocking Scale Remover (powerful cleaner for Tiles & Joints) Re-Assembling & Lubricating Molyspray (Dry lubrication for Small Mechanism) Tefliss 2 (PTFE based Clean and Dry Lubricant) Pate Spray (Lubrication of Tools, Assemblies and Mechanical Parts) HT 600 (Handy Corrosion Lubricants for parts subjected to bad weather) TM 900s (High Temperature Copper based Lubrication) CT 10 (Multy Purpose Lithium based Grease) CT 12G (Graphite based Lithium Grease for Low Friction) CT FLON (Lithium and Teflon based Multipurpose grease) WSA (Marine Grease) CT 609 (Grease for Food Industry) SI 4 (Silicon Grease) CB 6 (Clean Lubricant for Chains, Conveyor and Mechanism) LUBRIFIANT HP (High Temperature and Chemical Environment Grease) Silicon Spray (mould release agent for Rubbers and Plastics)
9 Chemical Treaded Lock, Sealing, Bonding 298 (Treaded Lock for Food Industry) 303 (Medium Strength locking for Threaded Parts) 300 (Permanent Locking for Threaded Parts) 507 NDI (Dry Solvent for Surfaces Preparation) 318 (Locking for Retaining Parts eg. Bearing, Sleeve) 316 (Locking for Bushes, Bearing, Sleeves, Pulley) 310 (Very High Dynamic Strength Locking) 133 (Plastic Threaded Sealing Hot and Cold water) 340 (Sealing Paste with PTFE Resistance to Vibration) 329 (Medium strength Liquid Gasket) 367 (Seals Threaded Pipe and Connection) 331 (Teflon based Gasket for Hydraulic Connection) 342 (Flexible Sealant for Treaded Parts face Joints) 104 (Black Silicon Gasket for all Sealing Sumps, Doors) 103 (High Temperature Flexible Sealing and Bonding) Protection and Detection Medium Term Anti Corrosion Protection Long Lasting Protection for Storage Parts Cold Galvanizing Powerful Rest Stop Converter Increases Drive Belt Adhesion Welding Anti-Adhesion (spatter for nozzle, gages) Special Protect based on Ceramic for Nozzle Protection Leak Detector for Gas or Compressed Air Dry Solvent for Crack Detection Penetrating for Crack Detection Chlorine free Micro Emulsion for Machining Purpose Heavy Duty Cutting Oil Cleaning Solvent for Electronic Parts Insulating Varnish for High Voltage Cleaner for Window Surfaces (monitor, over head projector, copier) Citrus Fruits Hand Care Degreaser Water free Cleaner for Hand Hygiene
WAL-RICH CORPORATION SINCE 1950
HOSES 3/8 ID DOUBLE FEMALE HOSE - BAGGED BAGGED# SIZE Box 0802002 3/4 FHT x 4' 1 25 0802004 3/4 FHT x 5' 1 25 0802006 3/4 FHT x 6' 1 25 0802008 3/4 FHT x 8' 1 25 0802010 3/4 FHT x 10' 1 25 0802012 3/4
Hakki Pilke Raven spare parts manual
1 ENGLISH Hakki Pilke Raven spare parts manual Valimotie 1, FI-85800 Haapajärvi, FINLAND Tel. +358 8 772 7300, Fax +358 8 772 732 info@maaselankone.fi, www.maaselankone.fi 2 Table of contents 1 Upper section
Spare Parts List (Kits) Model Ref.:- HM35 SERIES A Spare Parts List (Kits) Issue 8 Dated 10-February-2015 Reference Drawing 09-1108-0000 Issue B Dated 07-January 2014 Drawing Ref. Part Number DESCRIPTION
REPLACEMENT PARTS MANUAL FOR MODEL: PWS 45-75, AED-2 & APK-4 SERIES
PREC SION Water Systems REPLACEMENT PARTS MANUAL FOR MODEL: PWS 45-75, AED-2 & APK-4 SERIES 0004 0002 0001 PRECISION WATER SYSTEMS WATER DISTILLER MANUFACTURED BY: PRECISION DESIGN & MANUFACTURING INC.
DLKF. EBARA Submersible Sewage Pumps Specifications Project: Model: Chk d: Date:
DLKF A. General: Provide submersible sewage pumps suitable for continuous duty operation underwater without loss of watertight integrity to a depth of 65 feet. Pump system design shall include a guide
CMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts.
CMA Dishmachines 1700 Knott Avenue Garden Grove, CA 981 Toll Free: 1- (800) 8-617 Fax: 1- (71) 89-11 Service Replacement Parts Undercounter High Temperature Dishwasher Model: UC6e M Machine Serial No.
MODEL CMA-180UC PARTS MANUAL Rev 1.18
MODEL CMA-180UC PARTS MANUAL Rev 1.18 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS MODEL CMA-180UC 1. PARTS
REF. NO Clamp Assembly 8 1 set Gasket (4 per set) S.S. Lock-washer 3/8 x 1/ Brass Impeller 3.
4.4 SUPPLY PUMPAK ASSEMBLY NOTE: This section applies only to systems, which include a supply pumpak. Only the H6, XA, and XC series systems contain a supply pumpak. If your system is a single zone, H6
Hydrotherapy Jets (Remote Water Quality System)
Page 1 of 6 Parts List (_) - 50 Roll of Flex PVC pipe 1-3/4 HP Circulating Centrifugal Pump 1 25 Roll of Flex PVC pipe 4-1 1 / 2 " Tees 2-1 1 / 2 " Ball Valves 2 - Female slip couplers 4-1/2" 90 degree
MODEL CMA-180UC PARTS MANUAL Rev 1.16
MODEL CMA-180UC PARTS MANUAL Rev 1.16 CMA DISHMACHINES 12700 KNOTT STREET GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS MODEL CMA-180UC 1. PARTS
Group-1 Agitators. Group-2 Air Conditioning Plant. Group-3 Air Handling Plant / Air Pressurisation System. Group-4 Belts (Conveyor, V & Wedge Belts)
Group-1 Agitators Group-2 Air Conditioning Plant Group-3 Air Handling Plant / Air Pressurisation System Group-4 Belts (Conveyor, V & Wedge Belts) Group-5 Boiler Pressure Parts / Bowl Mills Parts (Developed
Thermo Scientific Air Cadet
Thermo Scientific Air Cadet Vacuum/Pressure Pumps Air Cadet Vacuum Pumps Features A B C Compact size makes pumps ideal for portable applications. All-plastic, convoluted diaphragm design handles many vacuum/pressure
monty 4200 Truck Tire Changer Spare Parts list
monty 4200 Truck Tire Changer Spare Parts list Date 08/12/09 Figure 1 Baseframe Date 08/12/09 Page 2 Monty 4200 Spare Parts list Figure 2A Carriage with Mounting Arm Date 08/12/09 Page 3 Monty 4200 Spare
A. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals.
SECTION 23 21 23 - HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN. A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO
CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN HSROG ML-111148 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43003 (June 2001) HOT SECTION 26 OVEN TOP SECTION
FAN ENGINEERING. Sealing of Fan Housings
FAN ENGINEERING Information and Recommendations for the Engineer FE-700 Sealing of Fan Housings Introduction A variety of options are offered by fan manufacturers to seal fan housings. Sealing the housing
Settlement Agreement. Schedule 1: Covered Products
Settlement Agreement Schedule 1: Covered Products COVERED PRODUCT BRANDS BRASSCRAFT PLUMBSHOP PEERLESS SOLUTIONS MASTER PLUMBER COVERED PRODUCT CATEGORIES - WATER SUPPLIES SUPPLY STOPS WATER SUPPLY CONNECTORS
D. NEMA Compliance: Provide electric motors and components which comply with NEMA standards.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
GALATEA DOMUS. Dal 1901 COD
GALATEA DOMUS COD. 9942031.07 REV.00 TABLE 1 Mod. S 1 5163184CM RH CUP-HEATER PIPE 2 5074616LW CUPS-HEATER GRID 3 7819912 SCREW M4X6 4 7474217 ADHESIVE FEET 12,7 H5,8 5 5961602.01 CUPS-HEATER 6 7816002
A. Section Common Motor Requirements for HVAC Equipment: Fan motors.
SECTION 233516 - ENGINE EXHAUST SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Exhaust fans. B. Ductwork and duct fittings. C. Inlet fittings. D. Accessories. E. Carbon monoxide detectors. 1.2 RELATED
UNIVERSITY OF ROCHESTER DESIGN STANDARDS NOVEMBER 1, 2013
SECTION 15800 - AIR HANDLING EQUIPMENT 1.1 GENERAL A. All air handlers installed shall conform to the University of Rochester specification Guideline for Semi-Custom and Pre-Engineered Air Handling Units.
ILLUSTRATIONS ARE FOR REFERENCE ONLY AND ARE SUBJECT TO CHANGE WITHOUT NOTICE ITEM P/N DESCRIPTION
TC-0 TURN PLATE TC-0 TURN PLATE 0 0 0 TC-0-000 TURNTABLE TC-0-00 TURNTABLE, TC-0 TC-0-00 SCREW, M X TC-0-00 COVER, TC-0 TC-0-00 RETAINING PIN TC-0-00 CLAMP TC-0-00 CLAMP SEAT TC-0-0 CLAMP SEAT, TC-0 TC-0-00
A DIVISION OF HOSE & TUBING CATALOG 2017
A DIVISION OF HOSE & TUBING CATALOG 2017 Hose assemblies fabricated to customer requirements - our specialty. Let us know what your requirements are. Hose branding - just one of the value added services
SAN JUAN FRESH WATER COOLING SYSTEMS
SAN JUAN FRESH WATER COOLING SYSTEMS 4.3-5.7 GI VOLVO Block Only Cooling, Mounted Off Engine Kit #V-111 Installation Instructions San Juan Engineering Heat Exchangers provide thermostatically controlled
PRICE BID. UNIT QTY Rate in Figure Rate in words Amount DESCRIPTION OF ITEM D: FIRE PROTECTION SYSTEM
ANNEXUREIII D: FIRE PROTECTION SYSTEM SECTION ADDRESSABLE FIRE DETECTION AND ALARM SYSTEM Supply, Installation, testing and commissioning of Analogue Addressable Fire Alarm Control panel with battery backup
SECTION STEAM CONDENSATE PUMPS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 22 23 STEAM CONDENSATE PUMPS SPEC WRITER NOTES: 1. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph not applicable
AUTOMATIC WASHER MODELS: 7MMVWC100DW1 (White) 02/26/ Maytag Part No. W Rev. B
AUTOMATIC WASHER MODELS: 7MMVWC100DW1 (White) 2014 Maytag Part W10679609 Rev. B TOP AND CABINET PARTS 2 Part W10679609 Rev. B TOP AND CABINET PARTS Part Description 1 Literature Parts W10658636 Installation
B. HI Compliance: Design, manufacture, and install pumps in accordance with HI "Hydraulic Institute Standards."
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
VSA SEWAGE PUMP. Capacities to 1600 gpm, Heads to 120, Horsepower range 3/4 thru 40, 3 thru 6 discharge, 1750 and 1150 operation.
Brochure# 228E 122011 TYPE VSA SEWAGE PUMP Capacities to 100 gpm, Heads to 120, Horsepower range 3/ thru 0, 3 thru discharge, 1750 and 1150 operation. HIGHLIGHTS Wet-Pit Installations Pumps Suspend From
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION AIR HANDLING UNITS
SECTION 23 70 00 AIR HANDLING UNITS PART 1. GENERAL 1.1 Section includes air-handling units to 15,000 cfm and accessories. 1.2 Related Sections 1 : A. Division 01 - Brown University Standard for Narragansett
Essex County College - West Essex Campus Addition And Renovations dib # / SECTION HYDRONIC PIPING SPECIALTIES PART 1- GENERAL
Essex County College - West Essex Campus Addition And Renovations dib # 54292 / 11-14 SECTION 232116 - HYDRONIC PIPING SPECIALTIES PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions
C. B. Trading Corporation
+91-8048737256 C. B. Trading Corporation http://www.cbtc.in/ C. B. Trading Corporation is an eminent distributor and trader of a wide range of s, Pipe Fittings, Forged Carbon Steel and Water & Steam Flow
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
RA 701 B Batterie assembling. As at: 01/15/10 Time:21:19
Batterie assembling As at: 01/15/10 Time:21:19 Batterie assembling As at: 01/15/10 Time:21:19 Pos. Description Reference 01 Battery container 701.210 02 Guide rail 710.356 03 Hexagon screw M 6x12 P...486
PARTS CATALOGUE 2011
Lindstrand Hot Air Balloons Limited Maesbury Road, Oswestry Shropshire, SY10 8ZZ, U.K. Tel: +44 (0)1691 671717 Fax: +44 (0)1691 671122 sales@lindstrand.co.uk PARTS CATALOGUE 2011 INDEX PAGE 2: PAGE 3:
COGEIM COGEIM EQUIPMENT MAINTENANCE AND REFURBISHMENT A NECESSARY CHOISE Number 1 filter-dryer supplier in the world
COGEIM Number 1 filter-dryer supplier in the world COGEIM EQUIPMENT MAINTENANCE AND REFURBISHMENT A NECESSARY CHOISE WWW.3V-TECH.COM 3V-TECH SERVICES AFTER-SALES DIVISION PREVENTIVE MAINTENANCE EMERGENCY
Cold water HD 9/18-4 ST
Cold water HD 9/18-4 ST The space-saving stationary high-pressure cleaners from Kärcher with up to 6 supply points can be individually configured according to requirements and impress with low wear and
COBRA -H EXTRACTOR 120V
COBRA -H EXTRACTOR 120V INFORMATION & OPERATING INSTRUCTIONS CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY
MODEL CMA-130VL PARTS MANUAL Rev 1.00
MODEL CMA-130VL PARTS MANUAL Rev 1.00 DISTRIBUTED EXCLUSIVELY BY CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS
A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Global-Tek (Singapore) Pte Ltd
Global-Tek (Singapore) Pte Ltd Door Type G-TEK G-TEK WWW.GLOBAL-TEK.COM.SG 1 P a g e Door Type, CONTENTS Wash and Rinse Arm Assembly....... 3-4 Booster Heater... 5-6 Wash Chamber.. 7-8 Door Lift Assembly...9-10
SECTION HEATING AND AIR CONDITIONING PIPING SYSTEMS. A. Provisions of Division 01 apply to this section. 1. Chilled Water System.
SECTION 15180 PART 1 - GENERAL 1.01 SUMMARY A. Provisions of Division 01 apply to this section B. Section Includes: Providing complete piping systems for heating, ventilating, and air conditioning systems
4-1 1 / 2 " Tees / 2 " hole saw w/ 1/4" drill bit / 2 " Male slip plugs
Section 1: Parts List 1-50 Flex PVC pipe 2-1 1 / 2 " Ball Valves 4-1/2" 90 degree elbows 4 - Lengths of 1/2" PVC 4 - Jet bodies 4 - Jet nozzles 4 - Female slip/female slip unions 2 - Female slip/fpt union
Manifold Cleaning and System Refurbishment...N3 Nozzle Heater and Hot Runner Component Repair...N4
N1 Aftermarket Hot Runner Parts & Services: Manifold Cleaning and System Refurbishment...N3 Nozzle Heater and Hot Runner Component Repair...N4 Aftermarket Hot Runner Replacement Parts: Axial Clamp Heaters...N9
Model 10AB/APRB Automatic Dishwasher
Model 10AB/APRB Automatic Dishwasher Rinse and Wash Head Assemblies ITEM 1 0126800 End Plug 2 0125000 Rinse Arm Body (only) 3 0126000 Nylatron Washer (2 places) 4 0125500 Hex Nut 5 0126500 Snap Ring 6
MITICA. Dal 1901 COD
MITICA COD. 00.0 REV.0 0SG GROUP FRONTAL (up to.0.) 0.0SG GROUP FRONTAL (from.0.) 00SG GROUP FRONTAL. TOP version(up to.0.) 00.0SG GROUP FRONTAL. TOP version (from.0.) 00 SCREW TCEI MX ADHESIVE FEET 0LW
215 Gallon Waste Oil Tank With Bypass Regulator Installation Instructions
215 Gallon Waste Oil Tank With Bypass Regulator Installation Instructions Lanair Products LLC 4109 Capital Circle Janesville, Wisconsin 53546 1-888-370-6531 www.lanair.com BEFORE YOU BEGIN INSTALLATION...
HVAC BASIC MATERIAL AND METHODS 1.01 RELATED CORNELL DESIGN AND CONSTRUCTION STANDARDS
230500 HVAC BASIC MATERIAL AND METHODS PART 1 GENERAL 1.01 RELATED CORNELL DESIGN AND CONSTRUCTION STANDARDS A. Section 230000 Basic HVAC Requirements B. Section 230523 Valves C. Section 230510 Chilled
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS VARIABLE SPEED BOOSTER PUMP IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INFORMATION WARNING: RISK OF ELECTRICAL SHOCK
DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS
PART 0 A/E INSTRUCTIONS 0.01 Design Requirements A. Pumping system design 1. A primary-secondary pumping system is preferred. Redundant pipes are required for chillers and boilers. 2. Select pumps to operate
SECTION HYDRONIC PIPING
SECTION 23 21 13 HYDRONIC PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes pipe and fitting materials, joining methods, special-duty valves, and specialties for the following: 1. Hot-water
Home Stacked Washer/Dryer
Home Stacked Washer/Dryer Refer to Page 3 for Model Numbers Parts SWD443C_802107 www.comlaundry.com Part No. 802107R6 August 2014 Table of Contents Title Page Parts Ordering Information... 2 Serial Plate
EX20. Parts List Models: (100C) (cold), (100H) (heated), (100SC) (single cord, heated) Form No /2015 REV A
EX0 Parts List Models: 560588 (00C) (cold), 560589 (00H) (heated), 560590 (00SC) (single cord, heated) Form No. 56065 5/05 REV A GENERAL VIEW Item Ref. No. Qty Description Base System Recovery System Solution
HD 7/11-4 Cage Classic
HD 7/11-4 Cage Classic Long service intervals and high-quality components such as the crankshaft pump with ceramic piston are among the many strengths of the HD 7/11-4 Cage Classic single-phase high-pressure
ORIGINAL SPARE PARTS CHD-6330
ORIGINAL SPARE PARTS CHD-6330 85010075/02 Revision 02/2013 FRAME 1.0 FRAME 1.0 Rif Code Description 1 *4399880 SCREW TE 10x40 2 *4399378 WASHER D.10 (10,5x21x2) 3 *6611330 SUPPORT 4 *7910913 CHUCK 5 *4399288
PITNEY BOWES. Parts Manual. Copyright, Pitney Bowes Inc All rights reserved. FIT-Dryerpartsvrev0 1
FLEXIBLE INKJET TRANSPORT 30 FIT DRYER BASE (SLV) Parts Manual Copyright, Pitney Bowes Inc. 2010 All rights reserved FIT-Dryerpartsvrev0 1 VERSION HISTORY The table below summarizes the history of this
Granule Gastro/Combi
Granule Gastro/Combi Spare parts list Granule Gastro serial # 710010- Granule Combi serial # 810010- Art. No. EN 21111-2010-03. GRANULDISK AB retains the right to make technical changes to the products.
SECTION GENERAL-SERVICE COMPRESSED-AIR SYSTEMS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Pipe and Pipe Fittings. B. Air compressor. C. Air receiver and accessories. D. Aftercooler. E. Refrigerated air dryer. F. Pressure reducing station. 1.02 RELATED
TOP AND CABINET PARTS
TOP AND CABINET PARTS AUTOMATIC WASHER 12 08 Printed in U.S.A. (drd)(bay) 1 Part No. Rev. A TOP AND CABINET PARTS 1 Literature Parts W10151563 Use & Care Guide W10207733 Tech Sheet W10171153 Energy Guide
WASHER/DRYER CONTROL PANEL PARTS
WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts W10356098 Installation Instructions W10343071 Guide, Use & Care W10364010 Wiring Diagram W10343084 Energy Guide 2 3390688
Industrial Processing Solutions
Industrial Processing Solutions Fluid power, filtration, and roll cleaning products. Innovative products and technologies. Rotating Unions & Accessories Rotary unions for water and air service ( 3 8 to
Electric Automatic Carpet Extractor. Operator and Parts Manual. Model No.: Rev. 00 (11-99)
1520 Electric Automatic Carpet Extractor Model No.: 607649 Operator and Parts Manual TENNANT COMPANY Commercial Products 12875 RANSOM STREET HOLLAND MI 49424 U.S.A. FAX: 1 800 678 4240 CUSTOMER SERVICE:
Appendix B. Symbols for Drawings. Table B.1. Air moving devices and ductwork symbols. Air Movement. Fans. Axial flow fan.
Appendix B Symbols for Drawings Table B.1 Air moving devices and ductwork symbols Air Movement Fans Axial flow fan Centrifugal fan Propeller fan Intake roof ventilator (supply) Exhaust roof ventilator
Parts and Service Manual
Section II Parts and Service Manual (70241A) CLARKE TECHNOLOGY Operator's Manual - MINI MAX Page -29- Frame and Front Cover Assembly Drawing 2/01 Page -30- CLARKE TECHNOLOGY Operator's Manual -MINI MAX
Essex County College - West Essex Campus Addition And Renovations dlb # / 11-14
SECTION 210523 - GENERAL-DUTY VALVES FOR WATER-BASED FIRE-SUPPRESSION PIPING PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
ULTRA DYNAMIC HOSE PRODUCTS HOSE & TUBING CATALOG 2018 A DIVISION OF UBBER MPANY, INC. RUBBER COMPANY, INC RUBBER COMPANY, INC.
ULTRA DYNAMIC HOSE PRODUCTS HOSE & TUBING CATALOG 2018 A DIVISION OF RUBBER COMPANY, INC. UBBER MPANY, INC. RUBBER COMPANY, INC Hose assemblies fabricated to customer requirements - our specialty. Let
IMAGE V. Parts and Service Manual
IMAGE 0V Section II Parts and Service Manual (88B) CLARKE TECHNOLOGY Image Operator's Manual Page AUTHORIZED PERSONNEL MAINTENANCE To Access Pump Motor. Remove brush housing from machine. See "Brush Motor
TOP AND CABINET PARTS For Model: 7MWTW1603AW0 (White)
TOP AND CABINET PARTS AUTOMATIC WASHER 12 11 Litho in U.S.A. (JLP)(bay) 1 Part No. Rev. A TOP AND CABINET PARTS 1 Literature Parts W10329765 Installation Instructions W10454963 Use & Care Guide W10280489
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
BD 14/4 AUTOMATIC SCRUBBER MODEL NO: 99414
TORNADO INDUSTRIES, LLC 3101 WICHITA COURT FORT WORTH, TX 76140 PHONE 800-VACUUMS FAX 817-551-0719 WWW.TORNADOVAC.COM Operations & Maintenance Manual For Commercial Use Only BD 14/4 AUTOMATIC SCRUBBER
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING
SECTION 221123 - DOMESTIC WATER PUMPS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following all-bronze and bronze-fitted centrifugal pumps for domestic cold- and hot-water circulation: 1.
Spare parts list ( ) Spare parts list PUZZI 100
Spare parts list (5.958-029.0) Spare parts list PUZZI 100 10.02.2012 www.kaercher.com EN Table of contents Spare parts list PUZZI 100 (5.958-029.0)... 6 10 Tank water PUZZI 100 (0.162-640.0)... 7 20 Appliance
DNJ SERIES PUMPS END SUCTION CLOSE COUPLED
DNJ SERIES PUMPS END SUCTION CLOSE COUPLED DNJ SERIES PUMPS These are close coupled with standard JM solids shaft ball bearing motors specially designed for pump applications in accordance with standards
HP310-C EXTRACTOR 120V
HP310-C EXTRACTOR 120V 1 2 3 VAC 1 VAC 2 PUMP INFORMATION & OPERATING INSTRUCTIONS DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE
SECTION DUCTWORK. A. Section Painting: Weld priming, weather resistant, paint or coating.
SECTION 15890 DUCTWORK PART 1 - GENERAL 1.1 SECTION INCLUDES A. Metal ductwork. B. Duct cleaning. 1.2 RELATED SECTIONS A. Section 09900 - Painting: Weld priming, weather resistant, paint or coating. B.
AUTOMATIC WASHER MODELS: 7MWTW1805DM0 (White) 01/31/ Whirlpool Corporation Part No. W Rev. A
AUTOMATIC WASHER MODELS: 7MWTW1805DM0 (White) 01/31/2014 2014 Whirlpool Corporation Part W10681994 Rev. A TOP AND CABINET PARTS 01/31/2014 2 Part W10681994 Rev. A TOP AND CABINET PARTS 1 Literature Parts
Roto-Jet I & II Tube Cleaning Systems
Roto-Jet I & II Tube Cleaning Systems Tube Size Tube Section Deposit Thickness of Deposit Deposit Flush 0.312 to 2.000 Straight Soft, guy, Light (7.9 to 50.8) ID Curved or organic Medium Dry Elliott Tool
FILTRATION SYSTEM MODEL: FILTER - 5 MULTI-SHIFTER, INC. P.O. BOX CHARLOTTE, N.C TEL#: FAX#:
FILTRATION SYSTEM MODEL: FILTER - 5 MULTI-SHIFTER, INC. P.O. BOX 411047 CHARLOTTE, N.C. 28241-1047 TEL#: 1-704-588-9611 FAX#: 1-704-588-4730 CONTENTS 1. System Overview 2. Air and Electrical Requirements
Spare parts list ( ) Spare parts list Priza
Spare parts list (5.970-755.0) Spare parts list Priza 2011-06-17 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list Priza (5.970-755.0)... 6 10 Tank water (0.164-654.0)... 7 20
Nanoprotech Italia
H2OFF Perfect protection from moisture and corrosion in hostile environments. H2OFF Electric H2OFF Anticorrosion How it works The nanomolecules of the product can penetrate into the smallest micro cavities
SCC 101 G Valid as of G11SE0404 up to G11SE... SCC 101 G
Gas unit Voltage 1NAC 230V 50-60Hz 1 1 Control panel 2 2 Electrical installation 3 3 Clima Plus 4 4 Steam generator, Bypass 5 5 Hot air heating 6 6 Motor and fan wheel 7 7 Interior cabinet 8 8 Door 9 9
Technical Documentation G.Mondini S.p.A. Tray Sealer TRAVE-384
Tool size: 330 mm wide x 840 mm long; the number of trays per tool is calculated using actual tray dimensions and tray orientation. Sealing tool driving system and sealing force generator consist in a
vending machine [CINO EC PRO] spare parts manual Latest Update 10/01/2014 Manual PDF Generated on :47
![vending machine [CINO EC PRO] spare parts manual Latest Update 10/01/2014 Manual PDF Generated on :47](/thumbs/80/81908193.jpg "vending machine [CINO EC PRO] spare parts manual Latest Update 10/01/2014 Manual PDF Generated on :47")
vending machine [CINO EC PRO] spare parts manual Latest Update 10/01/2014 Manual PDF Generated on 28-04-2014 08:47 CABINET (UNPLUMBED VERSION) Pag.2 CABINET (UNPLUMBED VERSION) Pos. Code Description 1
INSTALLATION INSTRUCTIONS
,t_2007 Lennox Industries Inc. Dallas, Texas, USA INSTALLATION INSTRUCTIONS CH33 Series Units EVAPORATOR 505,264M (65484504) 10/07 Supersedes 09/06 COILS n _putech blications ical Litho U.S.A. RETAIN THESE
WATER SUPPLY HOOK-UP DISPLAY 0-WSH-1
WATER SUPPLY HOOK-UP DISPLAY 0-WSH-1 A wide variety of angle stops and flex connectors in all the popular sizes, ranging from 9 to 60, are included in this 4 foot display. 9 SLOT FLEX RACK 10-0001 00/00/00
B COD REV.02
COD. 0 REV. 0 - COD.0 - REV.0 - COD.0 - REV.0 TABLE 0LW BACK HEATING GRILL GR 0LW BACK HEATING GRILL GR 00LW BACK HEATING GRILL GR 0LW CUPS-HEATER GRID GR 0LW HEATING GRID B0 GR 0LW HEATING GRILL GR 0LW
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HPR SERIES PROOFER/RETARDER MODEL HPR1 ML-132406 30 In. (Standard) ML-132407 50 In. (Standard) ML-132408 63 In. (Standard) ML-132409 83 In. (Standard) ML-132410 96 In. (Standard)
REPLACEMENT PARTS MANUAL
PREC SION Water Systems REPLACEMENT PARTS MANUAL FOR MODEL: PWS 8-8(120VAC), PWS 8-8(240VAC), AED-1(120VAC), AED-1(240VAC), APK-1(120VAC) & APK-1(240VAC) PART # 500003 500014 500006 500015 500007 500016
Remote Water Quality System Standard Equipment (supplied by EPI) Remote Water Quality System Optional Equipment (supplied by EPI)
Page 1 of 11 Parts List Remote Water Quality System Standard Equipment (supplied by EPI) 20sq ft Skimmer-Filter Remote Water Quality Plumbing Kit Heater-Controller Keypad Control 220V 3/4HP Circulation
Engine: 10LD Drawing: A
Engine: 10LD 400-2 Drawing: A printed by LOMBARDINI: 27-02-2012 Group: 10LD Engine: 10LD 400-2 Drawing: A INTAKE AND EXHAUST POS. CODE DESCRIPTION Qty 1 3617.223 clamp 1 2 AIR CLEANER - see Pos. A 2a 0
WASHER/DRYER CONTROL PANEL PARTS For Models: LTE6234DQ2, LTE6234DZ2, LTE6234DT2 (Designer White) (Designer Almond) (Biscuit)
WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions LIT3397616 English LIT3397634 Arabic Use & Care Guide LIT3401097 English LIT3405528 Arabic LIT8299786
Heat Exchanger Block Replacement Instructions
Series 1-4 Gas-fired water boiler Heat Exchanger Block Replacement Instructions Ultra-80 S1-4 Heat Exchanger Block Replacement Kit, Part No. 383-500-773 Ultra-105 S1-4 Heat Exchanger Block Replacement
BEXT Pro EXTRACTOR. Parts List Models: (400H), , (100H), (100) Form No /11 revised 4/13
BEXT Pro EXTRACTOR Parts List Models: 56050 (00H), 560509, 56058 (00H), 560508 (00) Form No. 560586 7/ revised / PARTS LIST TABLE OF CONTENTS DESCRIPTION PAGE Base System - 00H... - Base System - 00H...
WASHER & DRYER REPAIR
WASHER & DRYER REPAIR Lasco # Description Lasco # Description Blish Mize SKU UPC Code Picture Blish Mize SKU UPC Code Picture 02-1371 5965355 3/4 Gasket For Hose Thread Connection, Rubber, Inlet Washer,
Lasco # Description Picture Lasco # Description Picture
TOILET REPAIR 02-1755 2 Pack, White Toilet Seat Hinge 663353 Washer, 02-3133 664625 3-1/16 O.D. x 2-1/8 I.D. x 3/16, Close Coupled Sponge Gasket, Toilet Tank To Bowl Gasket, Sponge Rubber Tank To Bowl
Spare parts list ( ) Spare parts list PUZZI 100 *USA
Spare parts list (5.958-246.0) Spare parts list PUZZI 100 *USA 14.12.2012 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list PUZZI 100 *USA (5.958-246.0)... 6 10 Tank water (0.162-794.0)...
+91-8048762198 Eagle Rubber Products http://www.eaglerubber.in/ We are well established since 1980 as manufacturer, wholesaler and supplier of rubber products and components. Our range is widely used in
SERVICE MANUAL WASHING. Washer-dryers HEC-RIM HEC-ARCHED. Structural characteristics, electrical components, accessibility
SERVICE MANUAL WASHING HEC-RIM HEC-ARCHED Washer-dryers ELECTROLUX HOME PRODUCTS ITALY S.p.A. Spares Operations Italy Corso Lino Zanussi,30 Publication number I - 33080 PORCIA /PN (ITALY) 599 70 40-15
MAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE
MAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE Seal-less Design Price Pump magnetically driven, seal-less pumps provide a leak-proof
Homestyle Stacked Washer/ Dryer
Homestyle Stacked Washer/ Dryer Parts Refer to Page 3 for Model Numbers SWD441C_801998 www.alliancelaundry.com Part No. 801998R6 January 2018 Table of Contents Title Page Parts Ordering Information...