TB-390 Conveyor Stacker

Size: px
Start display at page:

Download "TB-390 Conveyor Stacker"

Transcription

1 TB-390 Conveyor Stacker OPERATIONS MANUAL Revised:

2 RENA Systems Inc. would like to Thank You for investing in our quality built products. Please record the following information for future reference: Model: Serial Number: Purchase Date: Purchased From: Dealer Name: Contact Name: Address: Address: Phone Number: Please take this opportunity to register your product. Use the following Warranty Registration link to register your product with Rena Systems. TB-390 Operations Rev. 7/30/2014 1

3 INTRODUCTION The TB-390 conveyor is used to transport media away from the exit end of a printer or tabber and deposit/stack the media into a drop-tray or against an optional back-stop. The stacked media can then be removed, from the back-stop or drop catch tray, without the need to stop the printer or tabber. An optional dryer and dryer mounting kit can also be installed on the TB-390 conveyor to aid in drying the images applied by an inkjet printer. See the section titled Optional Accessories. SPECIFICATIONS* Power Requirements Optional 230V Model Motor Circuit Breaker 115 VAC, 50/60 Hz, 1.0 AMP -9.0 AMP with 115V, 700W dryer option 230 VAC, 50/60 Hz, 1.0 AMP -5.5 AMP with 230V, 700W, dryer option 1 AMP Fuses: Speed Of Belts: 0.5 AMP x2, 250V, slow blow - for speed control board. NOTE: Dryer outlet is NOT fused within conveyor. Dyer fuses are located on the optional dryer. 25 to 250 feet per minute (variable) -min and max speeds are approximate and can vary between conveyors. Dimensions: Width: 15 in. (38.1 cm) Length: 34.5 in. (87.6 cm) Height: 5 in. (12.7 cm, from table top) Weight: 33 pounds (15 kg) * MANUFACTURER RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT WRITTEN NOTICE. TB-390 Operations Rev. 7/30/2014 2

4 SAFETY PRECAUTIONS WARNING THIS EQUIPMENT MUST BE CONNECTED TO A PROPERLY GROUNDED OUTLET! FAILURE TO DO SO CREATES A POTENTIAL DANGER OF ELECTRICAL SHOCK! THIS EQUIPMENT PRESENTS NO PROBLEM WHEN USED PROPERLY. OBSERVE THE FOLLOWING SAFETY RULES WHEN OPERATING THE RENA TB-390 CONVEYOR. BEFORE USING THE TB-390, YOU SHOULD READ THIS MANUAL CAREFULLY AND FOLLOW THE RECOMMENDED PROCEDURES, SAFETY WARNINGS, AND INSTRUCTIONS: Keep hands, hair, and clothing clear of rollers, belts, and other moving parts. Avoid touching moving parts or materials while the machine is in use. Before clearing a jam, be sure machine mechanisms come to a stop. Always turn off the machine before making adjustments, cleaning the machine, or performing any maintenance covered in this manual. Use the power cord supplied with the machine and plug it into a properly grounded wall outlet located near the machine and easily accessible. Failure to properly ground the machine can result in sever personal injury and/or fire. The power cord and wall plug is the primary means of disconnecting the machine for the power supply. DO NOT use an adapter plug on the line cord or wall outlet. DO NOT remove the ground pin from the line cord. DO NOT route the power cord over sharp edges or trapped between furniture. Avoid using wall outlets controlled by wall switches, or shared with other equipment. Make sure there is no strain on the power cord caused by jamming between the equipment, walls or furniture. DO NOT remove covers. Covers enclose hazardous parts that should be accessed by a qualified service representative. Report any damage of covers to your service representative. This machine requires periodic maintenance. Contact your authorized service representative for required service schedules. To prevent overheating, do not cover the vent openings. Use this equipment only for its intended purpose. DO NOT allow the conveyor or dryer to operate unattended. Follow any specific occupational safety and health standards for your workplace or area. Dryer Safety Warnings/Precautions: The dryer should not be turned on unless the conveyor belts are moving. The dryer lamps, dryer surfaces and conveyor surfaces will get very hot and can cause injury. Keep all body parts, clothing, hair, and flammable materials away from the dryer and hot surfaces. If a flammable item comes in contact with the dryer or dryer lamps, there is a chance that it can catch fire. If a material jam occurs; turn off the conveyor and dryer immediately. Keep a properly rated fire extinguisher within reach when operating the dryer. This manual is intended solely for the use and information of Neopost USA, Inc., its designated agents, customers, and their employees. The information in this guide was obtained from several different sources that are deemed reliable by all industry standards. To the best of our knowledge, that information is accurate in all respects. However, neither Neopost USA, Inc. nor any of its agents or employees shall be responsible for any inaccuracies contained herein. All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or any information storage and retrieval system, without permission in writing from the publisher. TB-390 Operations Rev. 7/30/2014 3

5 UNPACK THE CONVEYOR Please save the packaging for possible future use. If you plan to discard the packaging; do so in an environmentally appropriate manner. Do not discard the packaging until the conveyor is fully assembled. POWER CONNECTION IMPORTANT! The TB-390 is manufactured for use on a specific AC voltage source. Before connecting the power cord to the conveyor; verify that you are connecting the unit to a compatible AC voltage source. See the conveyor s serial tag for the voltage rating of your unit. 1. Check to be sure the Power Switch, at the front of the conveyor, is off (zero position). 2. Connect the supplied power cord to the Power In receptacle on the conveyor. Plug the other end of the power cord into a properly grounded wall outlet. CAUTION THE CONVEYOR IS DESIGNED TO BE PLUGGED INTO A GROUNDED OUTLET. FOR YOUR SAFETY, DO NOT REMOVE THE GROUND PIN FROM THE LINE CORD. TEST FOR APPROPRIATE TRANSPORT DIRECTION The TB-390 can be configured to run from right to left or from left to right. 1. Turn on the Power Switch. 2. Turn up the speed control dial, so the transport belts are moving. 3. Make note of the direction of transport. Left to Right or Right to Left. 4. If the transport direction is not appropriate, for your application, it will need to be reversed. See the section titled Reverse Operation before proceeding. TB-390 Operations Rev. 7/30/2014 4

6 DROP-TRAY INSTALLATION If you plan to install the optional dryer, please read the section titled Dryer Mounting Kit Instructions before proceeding. To assemble and install the Drop-Tray on the Conveyor follow these steps: 1. Disconnect the power cord from the unit. 2. If installed; remove the two screws holding the optional back-stop to the conveyor and remove the back-stop. See the Optional Accessories section, for more info on the optional back-stop. 3. At the exit end of the conveyor; remove the four screws [A] that mount the cover plate to the conveyor. Do not remove the cover plate. Note: The TB-390 can be configured to run from right to left or from left to right. The exit end of the conveyor is determined by the direction of the conveyor. 4. While holding the cover plate in place; install the Drop- Tray Support Bracket [B], to the exit end of the conveyor, using the four screws removed in Step Install the Paper Guide Roller assembly, to the exit end of the conveyor, using the four screws supplied [C]. The Paper Guide Roller assembly should be mounted as shown with the rollers resting on the exit roller of the conveyor. TB-390 Operations Rev. 7/30/2014 5

7 6. Hook the Tray Base into the desired slots on the Drop-Tray Support Bracket. The Tray Base position may be adjusted left or right, depending on media exit position, and up or down to provide more or less stack height. 7. Remove the knobs and securing plates from the guides. Attach the guides to the Tray Base as shown. The largest guide is the Paper Stop Guide. The Paper Stop Guide is installed on the slot that runs most of the length of the Tray Base. The Wide Side Guide is installed on either of the two slots at the side of the Tray Base (slot position determined by media length). The Narrow Side Guide can be installed on any of the threaded holes in the Tray Base (hole position determined by media size). POSITIONING THE CONVEYOR 1. The conveyor should be placed at the exit end of the printer or tabber, as shown. When using the drop-tray, the conveyor must be positioned so the drop-tray hangs off the end of the table. The work surface or table must be capable of properly supporting the weight of the conveyor and the printer or tabber. 2. Center the conveyor at the exit end of the printer or tabber. Envelope Imager 2.5 and TB-390 Conveyor T-350 Dual Tabber, and TB-390 Conveyor TB-390 Operations Rev. 7/30/2014 6

8 OPERATING THE CONVEYOR 1. Connect power to the conveyor. See the section titled Power Connection. 2. Turn on the conveyor and the printer or tabber. 3. Feed a single piece of stock through the printer or tabber and onto the conveyor. Observe the way it is received by the conveyor. 4. Loosen the locking knob [A] and adjust the position of the stacking wheel assembly so that the lead edge of the media just touches the stacking wheels, as it exits the printer or tabber. 5. Adjust the speed control knob to set the desired conveyor transport speed. Clockwise = Faster (bigger gap between pieces or less overlap). Counter-clockwise = Slower (smaller gap between pieces or more overlap). Power Switch Speed Control Note: When the optional back-stop is used; the speed of the conveyor must be set so that adjacent pieces are overlapping each other. When the standard drop-tray is used the media does not need to be overlapped. REVERSE OPERATION The TB-390 can be configured to run from right to left or from left to right. If the conveyor is not running in the desired direction, it can be reconfigured as follows: 1. Disconnect the power cord from the conveyor. 2. Slide the position of the transport direction switch, located under the conveyor, to the opposite position. 3. Reconnect the power cord to the conveyor. 4. If necessary; move the guide roller assembly and the stacking tray (back-stop or droptray) to the opposite end of the conveyor. TB-390 Operations Rev. 7/30/2014 7

9 TROUBLESHOOTING If the conveyor should fail to run, check for jammed paper between the belts and roller. Also, check the fuses and motor circuit breaker. Replace fuses or reset breaker as necessary. The fuse holders and circuit breaker are located on the rear of the conveyor. WARNING DISCONNECT THE POWER CORD WHEN CHECKING OR REPLACING FUSE! EVEN IF THE BREAKER OR ONE OF THE FUSES BLOWS; SOME ITEMS ON/IN THE CONVEYOR WILL STILL HAVE POWER! ALWAYS REPLACE THE FUSE WITH THE SAME TYPE. FAILURE TO DO SO MAY DAMAGE THE ELECTRONIC CIRCUIT BOARD. Problem No Operation Conveyor Runs, but Dryer Won t Turn On Dryer Turns On, but Conveyor Won t Run. Fuse Ratings: 0.5 Amp x2, 250V, slow blow. Possible Cause/Solution No AC Power Turn on conveyor s power switch. Verify that power cord is properly connected from wall outlet to conveyor. Check fuses and breaker on conveyor. Check voltage from wall outlet. Dryer power is only enabled when conveyor s power switch is on. Verify that dryer power cord is properly connected from dryer to dryer out outlet on conveyor. Check fuses on dryer. Turn up conveyor speed control. Check fuses and breaker on conveyor. Note: Even if the conveyor s breaker is tripped or the fuses are blown, power is still applied to the dryer out outlet when the conveyor s power switch is on. TB-390 Operations Rev. 7/30/2014 8

10 OPTIONAL ACCESSORIES Back-stop (Part #: 57E ) Important: The optional back-stop can not be used when the optional dryer is installed. 1. If the drop catch tray is installed it must be removed before you can attach the back-stop. 2. Attach the back-stop to the conveyor, using the two screws provided. Dryer (Part #: DRYER IR7C or DRYER IR7C 220V) & Dryer Mounting Kit (Part #: DKE-700) An optional 700 watt dryer is available for use on the TB-390. To help prevent damage to the conveyor and conveyor belts; the dryer should not be powered on if the conveyor belts are not moving. See the Safety Precautions section. Please see the next section for Dryer Mounting Kit Instructions. TB-390 Operations Rev. 7/30/2014 9

11 Dryer Mounting Kit Instructions Note: The images shown in this procedure depict a conveyor that is being setup for right to left transport. If you plan to use your conveyor for left to right transport; the items shown in this procedure must be attached at the opposite sides of the conveyor. In addition; the dryer images, shown in this procedure, are of an older dryer model. 1. Disconnect the power cord from the conveyor. 2. To install the Dryer Mounting Kit (DKE-700) you must first remove the following parts from the TB-390. A. Stacking Tray [A] (2 screws) Important: The optional back-stop can not be used when the optional dryer is installed. B. Guide Assembly [B] (4 screws) Remove the operator s side bracket first, then the rear support bracket. 3. Install the new Rear Roller Support [C], to the entrance end of the conveyor, using two screws as shown. Note: As viewed from back side of conveyor. Conveyor being used for right to left transport. 4. Hook the Guide Roller Support over the shaft on the rear roller support [1], and then install the Front Roller Support using two screws [2] as shown. Note: As viewed from operator (front) side of conveyor. Conveyor being used for right to left transport. 5. Next install the Front Exit Roller Assembly, to the exit end of the conveyor, by attaching the mounting brackets to the frame of the conveyor as shown using two screws each side [3]. Note: As viewed from operator (front) side of conveyor. Conveyor being used for right to left transport. TB-390 Operations Rev. 7/30/

12 6. Remove the two Levers [4] and Bearing Washers [5] from the two Dryer Support Shafts [6]. Install the two shaft assemblies into the holes provided in the Dryer as shown. Reinstall the two Levers [4] and Bearding Washers [5] to the shafts. NOTE: When installing the two Levers [4] make sure that the cams on the opposite side of the shaft are in the same position as the cams on the levers. The dryer images shown are of an older dryer model. 7. The Dryer Assembly can now be placed in the support brackets. Make sure that the Bearing Washers are between the support brackets and the cams as shown. Note: Image depicts conveyor being used for right to left transport. NOTE: The Bearing Washers should go between the support brackets and the cams. TB-390 Operations Rev. 7/30/

13 8. Plug the cord supplied with the Dryer into the receptacle on the Dryer and then into the Receptacle labeled Dryer on the Conveyor. Then plug the Conveyor into the wall outlet. CAUTION: Conveyors and Dryers are available in 115V and 230V versions. Verify the conveyor and dryer voltage ratings, before connecting them to an appropriate power source. Note: The dryer images shown in the rest of this procedure are of an older dryer model. The image to the right; can be used to identify the locations for the power receptacle and power switch on the newer dryer models. 9. Install the Drop-Tray. See the section titled Drop-Tray Installation. Important: The optional back-stop can not be used when the optional dryer is installed. 10. Connect the power cord to the conveyor. See the section titled Connecting Power. 11. To operate the Dryer first set the two levers [4] so that the media can pass under the dryer without interference. Then turn on the dryer s power switch ON and finally turn on the conveyor s power switch. NOTE: The dryer will not operate if the conveyor is not turned ON. 12. To accommodate different sized media and different drying areas; the Dryer and the Guide Rollers may be adjusted from side to side, by sliding them on the shaft assemblies. CAUTION DO NOT OPERATE THE DRYER IF THE BELTS ON THE CONVEYOR ARE NOT MOVING. DO NOT BLOCK THE EXIT OF THE CONVEYOR WHEN USING THE DRYER. IF A MATERIAL JAM OCCURS; TURN OFF THE CONVEYOR AND DRYER IMMEDIATELY! PLEASE READ THE SAFETY PRECAUTIONS SECTION IN THIS MANUAL! TB-390 Operations Rev. 7/30/

14 Notes TB-390 Operations Rev. 7/30/

15 Copyright 2014 NEOPOST USA

EASY FEED LITE FRICTION FEEDER OPERATOR MANUAL. Rev

EASY FEED LITE FRICTION FEEDER OPERATOR MANUAL. Rev EASY FEED LITE FRICTION FEEDER OPERATOR MANUAL Rev 02-04-13 SAFETY PRECAUTIONS THIS EQUIPMENT PRESENTS NO PROBLEM WHEN USED PROPERLY. OBSERVE THE FOLLOWING SAFETY RULES WHEN OPERATING THE RENA EASY FEED

More information

Astro. FF-14 Friction Feeder. Operator Manual

Astro. FF-14 Friction Feeder. Operator Manual Astro FF-14 Friction Feeder Operator Manual SAFETY PRECAUTIONS THIS EQUIPMENT PRESENTS NO PROBLEM WHEN USED PROPERLY. OBSERVE SAFETY RULES WHEN OPERATING FF-14 FRICTION FEEDER. BEFORE USING FF-14, READ

More information

ASTRO FF14 FRICTION FEEDER SERVICE MANUAL

ASTRO FF14 FRICTION FEEDER SERVICE MANUAL ASTRO FF14 FRICTION FEEDER SERVICE MANUAL Astro Machine Corp. 630 Lively Blvd. Elk Grove Village, IL 60007 Phone: (847) 364-6363 Fax: (847) 364-9898 www.astromachine.com SAFETY PRECAUTIONS THIS EQUIPMENT

More information

TA-12/HT12 Tabber. OPERATING GUIDE Revised:

TA-12/HT12 Tabber. OPERATING GUIDE Revised: TA-12/HT12 Tabber OPERATING GUIDE Revised: 2-27-13 Neopost USA would like to Thank You for investing in our quality built products. Please record the following information for future reference: Model:

More information

TA-12. Tabbing System USER'S GUIDE

TA-12. Tabbing System USER'S GUIDE TA-12 Tabbing System USER'S GUIDE SAFETY PRECAUTIONS THIS EQUIPMENT PRESENTS NO PROBLEM WHEN USED PROPERLY. HOWEVER, CERTAIN SAFETY RULES SHOULD BE OBSERVED WHEN OPERATING THE TA12 TABBER. BEFORE USING

More information

XPS-ProDry User s Guide Dryer Base

XPS-ProDry User s Guide Dryer Base XPS-ProDry User s Guide XPS-ProDry User s Guide Dryer Base For Use with Inkjet Imaging Systems Manual Part#: M-3120 Revision: August 2005 XPS-ProDry User s Guide Written by Frank Mauri & John Brand Published

More information

SECAP Conveyor TC72 / Dryer TD72

SECAP Conveyor TC72 / Dryer TD72 SECAP Conveyor TC72 / Dryer TD72 4/08 Assembly, Operation & Parts Manual Second Edition TABLE OF CONTENTS SPECIFICATIONS UNPACKING ASSEMBLY 2 SETUP & OPERATION ELECTRICAL SCHEMATIC 8 CONVEYOR PARTS 9 OPTIONAL

More information

ASTRO ENVELOPE FEEDER AMC FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS

ASTRO ENVELOPE FEEDER AMC FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS ASTRO ENVELOPE FEEDER AMC-2000-17 FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS INTRODUCTION Thank you for purchasing the Astro Envelope Feeder. It is fast, efficient, reliable, and

More information

HEDMAN DI-50. Endorser Instructions. Hedman DI-50 Operators Guide

HEDMAN DI-50. Endorser Instructions. Hedman DI-50 Operators Guide HEDMAN DI-50 Endorser Instructions Hedman DI-50 Operators Guide 25-0132-20 TABLE OF CONTENTS 1. INTRODUCTION...1 1.1 DI-50 Description...1 1.2 Items Included...1 1.3 Safety Terms...2 1.4 Safety Precautions...3

More information

FD Heavy Duty Feeder for FD 280 Tabbing System

FD Heavy Duty Feeder for FD 280 Tabbing System FD 280-10 Heavy Duty Feeder for FD 280 Tabbing System Operator Manual 8/2011 First Edition TABLE OF CONTENTS 1. INTRODUCTION... 1 1.1 Feeder Description... 1 1.2 Items Included... 1 1.3 Operating Manual

More information

FD 90 / FD 95 Rotary Perforators

FD 90 / FD 95 Rotary Perforators FD 90 / FD 95 Rotary Perforators 11/2018 OPERATOR MANUAL SECOND EDITION TABLE OF CONTENTS SPECIFICATIONS 1 SAFETY PRECAUTIONS 1 DESCRIPTION 2 INSTALLATION AND OPERATION 3 INFEED TABLE ADJUSTMENT 3 OUTFEED

More information

FD 2052 AutoSeal 12/2007 OPERATOR MANUAL FOURTH EDITION

FD 2052 AutoSeal 12/2007 OPERATOR MANUAL FOURTH EDITION FD 2052 AutoSeal 12/2007 OPERATOR MANUAL FOURTH EDITION TABLE OF CONTENTS DESCRIPTION 1 SPECIFICATIONS 1 UNPACKING AND SET-UP 1-2 CONTROLS 2 OPERATION 3 CUSTOM FOLDS 3-4 Measuring Fold Lengths 3 Custom

More information

Easy-Lam School Budget Roll Laminator

Easy-Lam School Budget Roll Laminator DO NOT DISCARD BOX! (If for any reason you need to ship your machine back and you discard your box you will be responsible for purchasing another one plus any freight charges to ship the box to you) Easy-Lam

More information

ANYWHERE. U.S. Patent(s) Pending INSTRUCTION MANUAL WARRANTY CERTIFICATE

ANYWHERE. U.S. Patent(s) Pending INSTRUCTION MANUAL WARRANTY CERTIFICATE TM ANYWHERE BY U.S. Patent(s) Pending INSTRUCTION MANUAL WARRANTY CERTIFICATE 2017 Minka Lighting Inc. Manual design and all elements of manual design are protected by United States Federal and/or State

More information

HEDMAN The HEDMAN Company 189 Gordon St. Elk Grove Village, IL

HEDMAN The HEDMAN Company 189 Gordon St. Elk Grove Village, IL HEDMAN The HEDMAN Company 189 Gordon St. Elk Grove Village, IL 60007 800-872-2788 NOTICE Proprietary Information - this material is not to be reproduced by any means or disclosed in any way without prior

More information

Viking Installation Guide

Viking Installation Guide Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at

More information

SIMPLICITY MODEL LVPB7200

SIMPLICITY MODEL LVPB7200 SIMPLICITY MODEL 7200 LVPB7200 BODY GROUP 7200 BODY GROUP 7200 Key Part No Description Key Part No Description 1 7.8-PLAIN Simplicity 7000 Paper Bag 29 D625-0231 Suction Inlet Complete 2 B221-0213 Dust

More information

Model 5060/5070. Letter Opener Revision 3 Brush Transport

Model 5060/5070. Letter Opener Revision 3 Brush Transport Model 5060/5070 Letter Opener Revision 3 Brush Transport ON/OFF, Reset Envelope Guide Ramp / Envelope Model 5060, 5070 Letter Opener Introduction Variable Speed Track Cover Counter (Optional) Deflector

More information

EP-21F Manual Letter Folder Operation Manual

EP-21F Manual Letter Folder Operation Manual EP-21F Manual Letter Folder Operation Manual EP Equipment Co.,Ltd. Introduction Thank you for selecting EP folder. This machine is designed for efficiently folding paper up to legal size (216 356mm). To

More information

WAILEA OWNER S MANUAL

WAILEA OWNER S MANUAL WAILEA OWNER S MANUAL The blades in each pack are matched for equal weight to assure smooth fan operation. If more than one fan is being installed, be careful not to mix blades from different cartons.

More information

OPERATING MANUAL Gfp 255C Please read this manual carefully before operating!

OPERATING MANUAL Gfp 255C Please read this manual carefully before operating! OPERATING MANUAL Gfp 255C Please read this manual carefully before operating! Unpacking, assembly, and operating videos are available at www.gfpsmoothstart.com 1 Table of Contents Gfp 255C March 2015 Contents

More information

8 lb Lightweight Vacuum Model CK LW 13/1

8 lb Lightweight Vacuum Model CK LW 13/1 TORNADO INDUSTRIES 7401 W. LAWRENCE AVENUE CHICAGO, IL 60706 (708) 867-5100 FAX (708) 867-6968 www.tornadovac.com Operations & Maintenance Manual For Commercial Use Only 8 lb Lightweight Vacuum Model CK

More information

CEILING FAN OWNER'S MANUAL

CEILING FAN OWNER'S MANUAL CEILING FAN OWNER'S MANUAL READ AND SAVE THESE INSTRUCTIONS MODEL: 52-135-5WA-13 FAN RATING AC 120V. 60Hz CUL LISTED MODEL : AC-552OD 1. TOOLS AND MATERIALS REQUIRED Philips screw driver Blade screw driver

More information

Cooktop Chimney Ventilation Hoods

Cooktop Chimney Ventilation Hoods INSTALLATION GUIDE Cooktop Chimney Ventilation Hoods Contents Wolf Cooktop Chimney Ventilation Hoods.......... 3 Cooktop Chimney Hood Specifications............ 4 Cooktop Chimney Hood Installation.............

More information

1217A Operating Instructions

1217A Operating Instructions 1217A Operating Instructions Reversible Motor Friction Fed Conveyor Stacker Easy Disassembly Adjustable Folds Counter Available MADE IN USA SPECIFICATIONS Paper Weight.28 Lbs. Bond, 90Lbs. Cover, 135Lbs.

More information

INSTALLATION GUIDE Dual Fuel Ranges

INSTALLATION GUIDE Dual Fuel Ranges INSTALLATION GUIDE Dual Fuel Ranges Contents Wolf Dual Fuel Ranges......................... 3 Safety Instructions............................ 4 Dual Fuel Range Specifications.................. 5 Dual Fuel

More information

(The chances are you re never going to read me) Owner s Manual. Model S10E.

(The chances are you re never going to read me) Owner s Manual. Model S10E. (The chances are you re never going to read me) Owner s Manual Model S10E www.simplicityvac.com 1 Contents Getting Started Important Safety Instructions 2 Polarization Instructions 3 State of California

More information

Instruction Book for HD Punch Machines

Instruction Book for HD Punch Machines Instruction Book for HD Punch Machines HD7700, HD7000 & HD7500H Setup & Operator Manual Issue 5 February 2012 Performance Design LLC. These electric punches have been designed to punch most any job that

More information

DOCUMENT CREASING MACHINE

DOCUMENT CREASING MACHINE DOCUMENT CREASING MACHINE OPERATORS MANUAL Morgana Systems Limited Snowdon Drive Winterhill Milton Keynes Buckinghamshire MK6 1AP United Kingdom Telephone: ( 01908 ) 608888 Facsimile: ( 01908 ) 692399

More information

BARRACUDA DUAL MOTOR VACUUM OWNERS MANUAL. IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! CUDA26 MODEL# SERIAL#

BARRACUDA DUAL MOTOR VACUUM OWNERS MANUAL. IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! CUDA26 MODEL# SERIAL# www.usviper.com BARRACUDA DUAL MOTOR VACUUM OWNERS MANUAL IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! MODEL# SERIAL# CUDA26 VIPER NORTH AMERICA P.O. BOX 104 HAMILTON,

More information

ALUMA INSTRUCTION MANUAL WARRANTY CERTIFICATE

ALUMA INSTRUCTION MANUAL WARRANTY CERTIFICATE ALUMA BY INSTRUCTION MANUAL WARRANTY CERTIFICATE Manual design and all elements of manual design are protected by U.S. Federal and/or State Law, including Patent, Trademark and/or Copyright laws. The Minka-Aire

More information

Installation. 324 Series Built-In Dishwashers U L. Viking Range, LLC 111 Front Street Greenwood, Mississippi USA (662)

Installation. 324 Series Built-In Dishwashers U L. Viking Range, LLC 111 Front Street Greenwood, Mississippi USA (662) Installation Viking Range, LLC Front Street Greenwood, Mississippi 890 USA (66) 455-00 For product information, call -888-845-464 or visit the Viking Website at vikingrange.com U L C U L 4 Series Built-In

More information

installation and operation manual for Hunter Ceiling Fans

installation and operation manual for Hunter Ceiling Fans For Your Records and Warranty Assistance Model Name: Catalog/Model No.: Serial No.: Date Purchased: Where Purchased: For reference also attach your receipt or a copy of your receipt to the manual. installation

More information

CEILING FAN OWNER'S MANUAL

CEILING FAN OWNER'S MANUAL CEILING FAN OWNER'S MANUAL READ AND SAVE THESE INSTRUCTIONS MODEL: 52-771-5TK-13 52-771-5BW-SN 52-771-5WH-WH FAN RATING AC 120V. 60Hz CUL LISTED MODEL : AC-552A 1. TOOLS AND MATERIALS REQUIRED Philips

More information

OWNER S MANUAL FINLEY FIREPLACE. Product code: UPC code: Date of purchase: / /

OWNER S MANUAL FINLEY FIREPLACE. Product code: UPC code: Date of purchase: / / OWNER S MANUAL FINLEY FIREPLACE Product code: 0-08487460-1 UPC code: 817266010267 Date of purchase: / / ELECTRIC FIREPLACE HEATER HOME OWNER'S INSTRUCTION MANUAL Insert Model: SP18-1705-LED ATTENTION FIND

More information

DISHWASHER INSTALLATION GUIDE SPECIFICATIONS, INSTALLATION, AND MORE

DISHWASHER INSTALLATION GUIDE SPECIFICATIONS, INSTALLATION, AND MORE DISHWASHER INSTALLATION GUIDE SPECIFICATIONS, INSTALLATION, AND MORE COVE DISHWASHER Contents 3 Cove Dishwasher 4 Specifications 7 Door Panel 9 Installation 15 Troubleshooting Features and specifications

More information

Gallery Electric Fireplaces

Gallery Electric Fireplaces Gallery Electric Fireplaces Homeowner s Installation Instructions & Operating Manual Model: GE-50, GE-58, GE-70, GE-78 GE-94 FOR YOUR SAFETY SERVICE MUST BE PERFORMED BY A QUALIFIED SERVICE AGENCY. DO

More information

Model SFP-M50 Pizza Dough Moulder Operation and Service Manual

Model SFP-M50 Pizza Dough Moulder Operation and Service Manual Model SFP-M50 Pizza Dough Moulder Operation and Service Manual LBC Bakery Equipment, Inc. 6026 31 st Ave NE Tulalip, WA 98271 USA Phone: 888-RACKOVN (888-722-5686) Fax: 425-642-8310 Email: parts@lbcbakery.com

More information

Part Nos.: Laminators

Part Nos.: Laminators Part Nos.: 22-22813 -1 18 22-22812 -1 24 Laminators Mega Electronics Limited Mega House, Grip Industrial Estate, Linton, Cambridge. England. CB21 4XN Tel: +44 (0) 1223 893900 Fax: +44 (0) 1223 893894 Email:

More information

TACH-IT MODEL #3568 SEMI-AUTOMATIC TWIST TIE MACHINE OPERATION MANUAL AND PARTS LIST

TACH-IT MODEL #3568 SEMI-AUTOMATIC TWIST TIE MACHINE OPERATION MANUAL AND PARTS LIST TACH-IT MODEL #3568 SEMI-AUTOMATIC TWIST TIE MACHINE OPERATION MANUAL AND PARTS LIST 1 TABLE OF CONTENTS: SECTION 1 CAUTION PAGE 3 SECTION 2 PARTS IDENTIFICATION PAGE 4 SECTION 3 MACHINE DIMENSIONS AND

More information

W Model 1RKU2 w/optional Wall mount. Unit Model Weight (Lbs) Kilowatts Volts- Phase Amps Fan Output Heat Output

W Model 1RKU2 w/optional Wall mount. Unit Model Weight (Lbs) Kilowatts Volts- Phase Amps Fan Output Heat Output Operating Instructions & Parts Manual 1RKT2, 1RKT3, 1RKT4, 1RKT5, 1RKT9 and 1RKU2 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the

More information

INSTALLATION GUIDE Fryer Module

INSTALLATION GUIDE Fryer Module INSTALLATION GUIDE Fryer Module Contents Wolf Fryer Module............................ 3 Fryer Module Specifications..................... 4 Fryer Module Installation....................... 8 Service Information...........................

More information

Undercounter Refrigeration

Undercounter Refrigeration INSTALLATION GUIDE Undercounter Refrigeration Contents Undercounter Refrigeration..................... 3 Undercounter Specifications.................... 4 Site Preparation..............................

More information

FD 430 Envelope Sealer

FD 430 Envelope Sealer FD 430 Envelope Sealer 1/2018 OPERATOR, MAINTENANCE, & PARTS MANUAL REV. 1 2 CONTENTS 1 SAFETY INSTRUCTIONS... 5 1.1 Symbols and reference key... 5 1.2 Basic safety precautions... 6 1.3 Safety advice...

More information

9 TWIN WINDOW FAN MODEL: FW23-A1 SKU:

9 TWIN WINDOW FAN MODEL: FW23-A1 SKU: OWNER S MANUAL 9 TWIN WINDOW FAN MODEL: FW23-A1 SKU: 18859843 READ AND SAVE THESE INSTRUCTIONS CAUTION Read Rules for Safe Operation and Instructions Carefully. WARNING 1. To reduce the risk of fire or

More information

60" Hatteras BayTM. Patio. Instruction Manual. Includes our new Wall Control System. A Kichler Décor ceiling fan

60 Hatteras BayTM. Patio. Instruction Manual. Includes our new Wall Control System. A Kichler Décor ceiling fan Includes our new Wall Control System 60" Hatteras BayTM Patio A Kichler Décor ceiling fan Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010 Cleveland, Ohio 44131-8010 Customer Service 866.558.5706

More information

FitchTM. Instruction Manual. Includes our Basic Function CoolTouch TM Control System Looks permanent, but goes wherever you go!

FitchTM. Instruction Manual. Includes our Basic Function CoolTouch TM Control System Looks permanent, but goes wherever you go! Includes our Basic Function CoolTouch TM Control System Looks permanent, but goes wherever you go! FitchTM A Kichler Décor ceiling fan U.S. Patent Pending Kichler Lighting 7711 East Pleasant Valley Road

More information

1. SAFETY RULES. 1. To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning.

1. SAFETY RULES. 1. To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning. Kichler Basics 403 1 1. SAFETY RULES 1. To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance

More information

KF-250 Knife Folding Machine

KF-250 Knife Folding Machine KF-250 Knife Folding Machine Serial Number Date Page left blank intentionally 2 Table of Contents INTRODUCTION... 5 PREFACE... 5 SPECIFICATIONS... 5 ELECTRICAL SPECIFICATIONS... 6 SAFETY PROCEDURES...

More information

CEILING FAN OWNER'S MANUAL

CEILING FAN OWNER'S MANUAL Distinctive Lighting and Ceiling Fans CEILING FAN OWNER'S MANUAL MODEL: 52CW2L5-GM 52CW2L5-OBB READ AND SAVE THESE INSTRUCTIONS FOR CEILING FAN PARTS AND SERVICE, CALL 1-877-902-5588 FAN RATING AC 120V.

More information

C-IV 60 CEILING FAN READ AND SAVE THESE INSTRUCTIONS. FAN RATING AC 120V. 60Hz

C-IV 60 CEILING FAN READ AND SAVE THESE INSTRUCTIONS. FAN RATING AC 120V. 60Hz C-IV 60 CEILING FAN READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V. 60Hz Please do not use any electric or battery powered tools in the assembly and installation of this or any Matthews Fan Company

More information

Part No Revised: June TS1 TOASTER SYSTEM Instruction Manual Models # 5700 AND # 5700SF

Part No Revised: June TS1 TOASTER SYSTEM Instruction Manual Models # 5700 AND # 5700SF Part No. 44162 Revised: June 2006 TS1 TOASTER SYSTEM Instruction Manual Models # 5700 AND # 5700SF SAFETY PRECAUTIONS 2 TOASTER SYSTEM INSTALLATION CHECKING SHIPMENT Unpack the unit from the shipping container

More information

! WARNING To avoid risk of electrical shock, personal injury or death; disconnect power before servicing, unless testing requires power.

! WARNING To avoid risk of electrical shock, personal injury or death; disconnect power before servicing, unless testing requires power. 27 Electric Dryer Technical Information MDE9700A * Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or repair of this unit. Refer to Service

More information

Dryer. User manual DV22K6800** DV22K A-00_EN (US)_ indd :15:41

Dryer. User manual DV22K6800** DV22K A-00_EN (US)_ indd :15:41 Dryer User manual DV22K6800** DV22K6800-03650A-00_EN (US)_151211.indd 1 2015-12-11 7:15:41 Before installation Read through the following instructions before installing the dryer, and keep this manual

More information

IMPORTANT INSTRUCTIONS

IMPORTANT INSTRUCTIONS IMPORTANT INSTRUCTIONS W Fan Force Electric Space Heater DANGER ELECTRIC SHOCK OR FIRE HAZARD Figure 1 Covers all W Series models WARNING Read Carefully - These instructions are written in an effort to

More information

Installation and Maintenance Manual Please retain this manual for future reference.

Installation and Maintenance Manual Please retain this manual for future reference. 342 N. Co. Rd. 400 East Valparaiso, IN 46383 219-464-8818 Fax 219-462-7985 www.heatwagon.com Installation and Maintenance Manual Please retain this manual for future reference. Electric Construction Heaters

More information

IMPORTANT INSTRUCTIONS READ & SAVE

IMPORTANT INSTRUCTIONS READ & SAVE WALL/CEILING MOUNT HEATER OWNER S MANUAL Model No.: DR-966 6000W 240V 60HZ IMPORTANT INSTRUCTIONS READ & SAVE 1 TABLE OF CONTENTS Important Instructions.. 3 Specifications and Wiring Diagram 5 Parts of

More information

OPERATING INSTRUCTIONS MIGHTYLAM 2700 ROLL LAMINATOR

OPERATING INSTRUCTIONS MIGHTYLAM 2700 ROLL LAMINATOR OPERATING INSTRUCTIONS MIGHTYLAM 2700 ROLL LAMINATOR TABLE OF CONTENTS Safety Messages and Electrical Safeguards...3-4 Introduction... Laminator Features...5 Specifications...5 Intial Set-up...6 Operating

More information

ELECTRIC FIREPLACE HEATER OPERATION MANUAL

ELECTRIC FIREPLACE HEATER OPERATION MANUAL ELECTRIC FIREPLACE HEATER OPERATION MANUAL Important Safety Instructions: PLEASE RETAIN THIS USER S GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed

More information

CEILING FAN OWNER'S MANUAL

CEILING FAN OWNER'S MANUAL Style that revolves around you. CEILING FAN OWNER'S MANUAL QUATRO 10/09 WARNING: Read and follow these instructions carefully and be mindful of all warnings shown throughout. GENERAL INSTALLATION & OPERATION

More information

Installation & Maintenance Instructions

Installation & Maintenance Instructions B2451 & B2452 Series Wall Heaters SPECIFICATIONS MODEL VOLTS HZ AMPS WATTS BTUH B2451 120 60 12.5 1500 5120 B2452 240 60 8.3 2000 6826 208 60 7.2 1500 5120 DIMENSIONS OVERALL Height - 14 1/4 Width - 11

More information

CAUTION. Machine: SHRINK LABEL AUTOMATIC APLICATOR. Model: SLEEVEPRO 450AB. Input Voltage: 400 VAC, 3PH, 50Hz. Contact:

CAUTION. Machine: SHRINK LABEL AUTOMATIC APLICATOR. Model: SLEEVEPRO 450AB. Input Voltage: 400 VAC, 3PH, 50Hz. Contact: CAUTION Read carefully all the instructions of this manual before start any operation on this machine. Do not put your hands close to any moving part of the machine. Do not make any adjustment when the

More information

52 DorsetTM. Instruction Manual. Basic Function Wall Control System Included. A Kichler Decor ceiling fan

52 DorsetTM. Instruction Manual. Basic Function Wall Control System Included. A Kichler Decor ceiling fan Basic Function Wall Control System Included 52 DorsetTM II A Kichler Decor ceiling fan Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010 Cleveland, Ohio 44131-8010 Customer Service 866.558.5706

More information

Tank, Heater, and Control Operation Manual REV. E DATE: 04May2015

Tank, Heater, and Control Operation Manual REV. E DATE: 04May2015 Tank, Heater, and Control Operation Manual 25-710-804 REV. E DATE: 04May2015 Hanson Research Corporation 9810 Variel Avenue Chatsworth, CA 91311 USA (800) 821-8165 (818) 882-7266 FAX (818) 882-9470 www.hansonresearch.com

More information

30-YEAR LIMITED WARRANTY

30-YEAR LIMITED WARRANTY PROGRESS LIGHTING 30-YEAR LIMITED WARRANTY PROGRESS LIGHTING FAN MOTORS ARE WARRANTED TO THE END USER TO BE FREE OF ELECTRICAL AND/OR MECHANICAL DEFECTS FOR A PERIOD OF 30 (THIRTY) YEARS FROM DATE OF SALE.

More information

52 StarkkTM. Instruction Manual. A Kichler Select ceiling fan

52 StarkkTM. Instruction Manual. A Kichler Select ceiling fan 52 StarkkTM A Kichler Select ceiling fan Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010 Cleveland, Ohio 44131-8010 Customer Service 866.558.5706 8:30 AM to 5:00 PM EST, Monday - Friday

More information

Manual update 2016 MC37/MFC3600

Manual update 2016 MC37/MFC3600 Manual update 2016 MC37/MFC3600 SETUP INSTRUCTIONS Evaporative cooling works on the principle of heat absorption by moisture evaporation. Simply put, heat is removed from the air as water evaporates. You

More information

SOUTHERN ENTERPRISES INC.

SOUTHERN ENTERPRISES INC. SOUTHERN ENTERPRISES INC. RELAX If you can follow a few easy, step-by-step directions In order.you CAN ASSEMBLE THIS ITEM. STYLE NO.:FA514500TX ELECTRIC FIREBOX INSERT USER S OPERATING MANUAL CONSUMER

More information

Orrin. Instruction Manual. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S.

Orrin. Instruction Manual. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S. Patent Pending Orrin A Kichler Select ceiling fan Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010

More information

Summer Breeze Heater Service Manual

Summer Breeze Heater Service Manual Summer Breeze Heater Service Manual RSBH RSBH-SB RSBHP Revision: 1.0 Issued: 12-18-2012 Table of Contents I. Basic Assembly and Operation A. Safety Instructions... 2 B. Grounding Instructions... 3 C.

More information

Contents. Getting Started. Operation. Maintenance and Care. Problem Solving Guide. Warranty 13

Contents. Getting Started. Operation. Maintenance and Care. Problem Solving Guide. Warranty 13 OWNER S MANUAL Contents Getting Started Important Safety Instructions 2 Polarization Instructions 3 State of California Proposition 65 Warnings 3 Decription of the Vacuum 4 Assembling the Vacuum 5 Operation

More information

CAUTION signals a situation where minor injury or product damage may occur if you do not follow instructions.

CAUTION signals a situation where minor injury or product damage may occur if you do not follow instructions. S I N S T A L L A T I O N I N S T R U C T I O N S I M P O R T A N T I N F O R M A T I O N IMPORTANT NOTE: This installation must be completed by a qualified installer or service agency. Before you begin

More information

Manual for MC37/MFC3600

Manual for MC37/MFC3600 Manual for MC37/MFC3600 SETUP INSTRUCTIONS Evaporative cooling works on the principle of heat absorption by moisture evaporation. Simply put, heat is removed from the air as water evaporates. You feel

More information

BK5 Bug Killer. Read all instructions before using the bug killer. Contents

BK5 Bug Killer. Read all instructions before using the bug killer. Contents Read all instructions before using the bug killer Contents 1) Components... 3 Total Assembly... 3 2) Specifications... 4 3) Receiving... 4 4) Safety... 5 a) Power connections... 6 b) Control power... 6

More information

IMPORTANT INSTRUCTIONS READ & SAVE

IMPORTANT INSTRUCTIONS READ & SAVE 5000W Ceiling/Wall Mounted Garage Heater OWNER S MANUAL Model: PH-950N IMPORTANT INSTRUCTIONS READ & SAVE PET OWNERS WARNING: The health of some small pets including birds are extremely sensitive to the

More information

52 CEILING FAN READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V.

52 CEILING FAN READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V. Irene 52 CEILING FAN READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V. 60Hz TABLE OF CONTENTS Tools and Materials Required... 1 Package Contents... 1 Safety Rules... 2 Mounting Options... 3 Hanging

More information

LED. 60 StarkkTM. Instruction Manual. A Kichler Select ceiling fan

LED. 60 StarkkTM. Instruction Manual. A Kichler Select ceiling fan 60 StarkkTM LED A Kichler Select ceiling fan Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010 Cleveland, Ohio 44131-8010 Customer Service 866.558.5706 8:30 AM to 5:00 PM EST, Monday - Friday

More information

JAVA BY INSTRUCTION MANUAL WARRANTY CERTIFICATE

JAVA BY INSTRUCTION MANUAL WARRANTY CERTIFICATE JAVA BY INSTRUCTION MANUAL WARRANTY CERTIFICATE 2017 Minka Lighting Inc. Manual design and elements of manual design are protected by United States Federal and/or State Law including Patents, Trademark,

More information

Com-Pak Heater Benefits You Can Depend On Com-Pak Models Line Model w/o Model w/ Voltage Thermostat Thermostat Watts Amps (1) (2)

Com-Pak Heater Benefits You Can Depend On Com-Pak Models Line Model w/o Model w/ Voltage Thermostat Thermostat Watts Amps (1) (2) Benefits You Can Depend On Dual safety features Primary: power reset thermal switch Secondary: over temperature thermal fuse Heating element style quickly warms your room, and quickly cools when heater

More information

READ AND SAVE THESE INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS CEILING FAN INSTALLATION AND OPERATION INSTRUCTION FAN RATING AC 120V. 60Hz UL LISTED MODEL: AC-552OD WEIGHT OF FAN: 6.82 KGS 1. TOOLS AND MATERIALS REQUIRED Philips screw

More information

TRADITIONAL CONCEPT INSTRUCTION MANUAL WARRANTY CERTIFICATE

TRADITIONAL CONCEPT INSTRUCTION MANUAL WARRANTY CERTIFICATE TM TRADITIONAL CONCEPT BY INSTRUCTION MANUAL WARRANTY CERTIFICATE Manual design and all elements of manual design are protected by U.S. Federal and/or State Law, including Patent, Trademark and/or Copyright

More information

MILLA ELECTRIC FIREPLACE

MILLA ELECTRIC FIREPLACE MILLA ELECTRIC FIREPLACE MODEL NO. 064-3177-0 ASSEMBLY INSTRUCTIONS Toll-free: 1-888-670-6684 IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for

More information

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE

More information

1. SAFETY RULES WARNING WARNING. 8. Avoid placing objects in the path of the blades.

1. SAFETY RULES WARNING WARNING. 8. Avoid placing objects in the path of the blades. 1 1. SAFETY RULES 1. To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance with the National

More information

SUNSEEKER BY INSTRUCTION MANUAL WARRANTY CERTIFICATE

SUNSEEKER BY INSTRUCTION MANUAL WARRANTY CERTIFICATE SUNSEEKER BY INSTRUCTION MANUAL WARRANTY CERTIFICATE Manual design and all elements of manual design are protected by U.S. Federal and/or State Law, including Patent, Trademark and/or Copyright laws. The

More information

Service. Compact Dryer MDE2400AY*

Service. Compact Dryer MDE2400AY* Service This manual is to be used by qualified appliance technicians only. Maytag does not assume any responsibility for property damage or personal injury for improper service procedures done by an unqualified

More information

Installation and Operation Instructions ELECTRIC FIREPLACE X56WMEF1BLK X56WMEF1WHT

Installation and Operation Instructions ELECTRIC FIREPLACE X56WMEF1BLK X56WMEF1WHT Installation and Operation Instructions ELECTRIC FIREPLACE X56WMEF1BLK X56WMEF1WHT Tool list Assembly Instructions Important Safety Instructions Listing Approvals Glass Particles Installation Instructions

More information

e Heater/Exhaust Fan/Light User s Guide

e Heater/Exhaust Fan/Light User s Guide e Heater/Exhaust Fan/Light User s Guide abflh70l, BFLH85L Item Stock Number(s): BFLH70L, BFLH85L IMPORTANT INSTRUCTIONS - OPERATING MANUAL READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING

More information

Hatteras BayTM. Patio. Instruction Manual. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S.

Hatteras BayTM. Patio. Instruction Manual. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go! U.S. Hatteras BayTM Patio A Kichler Décor ceiling fan Designed to coordinate with a popular Kichler Lighting collection. Includes our new CoolTouch TM Control System Looks permanent, but goes wherever you go!

More information

SUPRA 52. U.S. Patents: D450,830 INSTRUCTION MANUAL WARRANTY CERTIFICATE

SUPRA 52. U.S. Patents: D450,830 INSTRUCTION MANUAL WARRANTY CERTIFICATE SUPRA 52 BY U.S. Patents: D450,830 INSTRUCTION MANUAL WARRANTY CERTIFICATE This product is protected by United States Federal and/or State Law, including Patent, Trademark and/or Copyright laws. Manual

More information

Integra Family. Operations Manual. Models: Integra TX SS, Integra HD, Integra DS, Integra DS LA, Integra UHS, Machine Name: Serial Number:

Integra Family. Operations Manual. Models: Integra TX SS, Integra HD, Integra DS, Integra DS LA, Integra UHS, Machine Name: Serial Number: Integra Family GREEN CIRCLE CERCLE VERT Operations Manual Models: Integra TX SS, Integra HD, Integra DS, Integra DS LA, Integra UHS, Machine Name: Date of Purchase: Serial Number: Service Center Number:

More information

CEILING FAN OWNER'S MANUAL

CEILING FAN OWNER'S MANUAL CEILING FAN OWNER'S MANUAL MODEL: Pelham HVFC# 2299 Old Bronze Satin Nickel Polished Nickel READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V. 60Hz. CUL LISTED MODEL: AC-554SY05-7S WEIGHT OF THE FAN:

More information

Sunburst. Instruction Manual. Includes our new Wall Control System. A Kichler Décor ceiling fan

Sunburst. Instruction Manual. Includes our new Wall Control System. A Kichler Décor ceiling fan Includes our new Wall Control System Sunburst A Kichler Décor ceiling fan Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010 Cleveland, Ohio 44131-8010 Customer Service 866.558.5706 8:30 AM

More information

Installation Instructions. Millennia Island (Ceiling Mount) Range Hoods. Models: DHI361, DHI421, DHI482 and DHI542

Installation Instructions. Millennia Island (Ceiling Mount) Range Hoods. Models: DHI361, DHI421, DHI482 and DHI542 Millennia Island (Ceiling Mount) Range Hoods Models: DHI361, DHI421, DHI482 and DHI542 Installation Instructions Approved for use with all dacor ranges and cooktops. IMPORTANT: INSTALLATION OF THIS HOOD

More information

INSTALLATION GUIDE Steamer Module

INSTALLATION GUIDE Steamer Module INSTALLATION GUIDE Steamer Module Contents Wolf Steamer Module.......................... 3 Steamer Module Specifications.................. 4 Steamer Module Installation..................... 8 Service Information...........................

More information

Multi-Function Cooktop

Multi-Function Cooktop INSTALLATION GUIDE Multi-Function Cooktop Contents Wolf Multi-Function Cooktop.................... 3 Multi-Function Cooktop Specifications............ 4 Multi-Function Cooktop Installation...............

More information

INSTALLATION GUIDE NZ AU GB IE A

INSTALLATION GUIDE NZ AU GB IE A BUILT IN OVEN OB90 models INSTALLATION GUIDE NZ AU GB IE 591672A 09.18 1 SAFETY AND WARNINGS WARNING! Electrical shock hazard Always disconnect the appliance from the mains power supply before carrying

More information

installation and operation manual for Hunter Ceiling Fans

installation and operation manual for Hunter Ceiling Fans For Your Records and Warranty Assistance Model Name: Catalog/Model No.: Serial No.: Date Purchased: Where Purchased: For reference also attach your receipt or a copy of your receipt to the manual. installation

More information

D14 & D18 Upright Vacuum

D14 & D18 Upright Vacuum Operator's Manual D14 & D18 Upright Vacuum READ THIS BOOK This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting

More information

INSTALLATION GUIDE Warming Drawers

INSTALLATION GUIDE Warming Drawers INSTALLATION GUID Warming Drawers Contents Wolf Warming Drawers......................... 3 Installation Considerations...................... 4 Warming Drawer Specifications.................. 8 Warming

More information