ML-758 Parts Manual. Dual Timer/Phase 7 OPL with FSS Options

Transcription

1 ML-758 Parts Manual Dual Timer/Phase 7 OPL with FSS Options American Dryer Corporation 88 Currant Road Fall River, MA Telephone: (508) / Fax: (508) techsupport@amdry.com SRS/mcronan ADC Part No

2 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following FOR YOUR SAFETY caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. POUR VOTRE SÉCURITÉ Ne pas entreposer ni utiliser d essence ni d autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: ML-758 DT/Phase 7 DATE OF PURCHASE MODEL NO. RESELLER S NAME Serial Number(s) Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) or telephone your order directly to the ADC Parts Department at (508) Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. IMPORTANT NOTE TO PURCHASER Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

3 Table of Contents Phase 7 OPL Microprocessor Control Panel Assembly For Models Mfd. as of July 10, Dual Timer OPL Control Door Assembly For Models Mfd. as of July 10, Phase 7 OPL Microprocessor Control Door Assembly For Models Mfd. prior to July 10, Dual Timer Control Door Assembly For Models Mfd. prior to July 10, Phase 7 OPL Microprocessor Control Panel Assembly... 7 Dual Timer Tap Touch Controls... 8 Phase 7 OPL Microprocessor Control Box Assembly... 9 Dual Timer Control Box Assembly Front Panel/Main Door Assemblies with Mechanical Fasteners Main Door Switch Assembly Front Panel Assembly Lint Drawer/Lint Drawer Switch Assemblies Basket (Tumbler)/Support Assemblies Basket (Tumbler) Bearing Assembly For Models with Grip Lock Type Bearings...16, 17 Basket (Tumbler) Bearing Assembly For Models with Setscrew Type Bearings...18, 19 Idler Bearing Assembly...20, 21 Non-Reversing Motor Mount Assembly...22, 23 Reversing T.E.F.C. Motor Mount Assembly...24, 25 Sensor Bracket Assemblies...26, 27 Direct Spark Ignition (DSI) Burner Assembly...28, 29

4 Electric Oven Assembly... 30, 31 Air-Operated Steam Damper Assembly... 32, 33 FSS Temperature Probe Assembly FSS Solenoid Assembly Single-Phase (1ø) MP Rear Electric Relay Panel Assembly... 36, V 3-Phase (3ø) MP Rear Electric Relay Panel Assembly V MP Rear Electric Relay Panel Assembly V MP Reversing Rear Electric Relay Panel Assembly... 40, V MP Reversing Rear Electric Relay Panel Assembly... 42, 43 Single Phase (1ø) D.T. Rear Electric Relay Panel Assembly V D.T. Rear Electric Relay Panel Assembly V D.T. Reversing Rear Electric Relay Panel Assembly Outer Top/Back Guard Assemblies Electric Oven Component Application Chart Additional Parts Available... 49

5 Phase 7 OPL Microprocessor Control Door Assembly For Models Mfd. as of July 10, White OPL Control Door (includes illus. nos. 1 and 3) #10-32 x 1/2 Phillips Machine Screw Noise Suppression Tape (sold by the foot) #10-16 x 3/4 TORX Torx + Bit 1/4 (for removal of TORX head screw) Control Door Support Rod #10-32 Multi-Thread U-Nut Control Door Rod Support Latch Control Door Rod Retainer Clip * 1 Logo ONLY * Contact reseller for logo. Telephone: (508) Fax: (508)

6 4 Dual Timer OPL Control Door Assembly For Models Mfd. as of July 10, White OPL Control Door (includes illus. nos. 1 and 3) #10-32 x 1/2 Phillips Machine Screw Noise Suppression Tape (sold by the foot) #10-16 x 3/4 TORX Torx + Bit 1/4 (for removal of TORX head screw) Control Door Support Rod #10-32 Multi-Thread U-Nut Control Door Rod Support Latch Control Door Rod Retainer Clip * 1 Logo ONLY * Contact reseller for logo. American Dryer Corporation 88 Currant Road / Fall River, MA

7 Phase 7 OPL Microprocessor Control Door Assembly 5 For Models Mfd. prior to July 10, Phase 7 Control Door without Hinge Noise Suppression Tape (sold by the foot) #10-32 x 1/2 TORX Screw Torx + Bit 1/4 (for removal of TORX head screw) #10-32 Multi-Thread U-Nut Milnor Logo Telephone: (508) Fax: (508)

8 6 Dual Timer Control Door Assembly For Models Mfd. prior to July 10, * 1 Logo ONLY White Control Door Assembly (includes illus. nos. 2, 3, and 8) Noise Suppression Tape (sold by the foot) #10-16 x 1/2 Hex Head TEK Crimptite Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod Spring Turn Latch (2-piece) * Contact reseller for logo. American Dryer Corporation 88 Currant Road / Fall River, MA

9 Phase 7 OPL Microprocessor Control Panel Assembly Phase 7 OPL Keyboard Phase 7 OPL Microprocessor Panel ONLY Phase 7 OPL Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 7) Phase 7 OPL Microprocessor #6-32 x 1/4 Phillips Round Head Machine Screw #6 Star Washer Amp Fuse mA Fuse Telephone: (508) Fax: (508)

10 8 Dual Timer Tap Touch Controls Minute Timer - 24 VAC Minute Timer - 24 VAC Red Pilot Light - 24 VAC Tap Touch Switch Relay SPST 24v Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel ONLY #6 Star Washer #6-32 Hex Nut #10-24 x 1/2 Phillips Pan Head Machine Screw #8-32 x 1/2 Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer American Dryer Corporation 88 Currant Road / Fall River, MA

11 Phase 7 OPL Microprocessor Control Box Assembly Pin Connector Pin Connector Pin Connector Pin Connector Pin Connector * #20-16 Socket * Female Crimp Terminal * As needed. Telephone: (508) Fax: (508)

12 10 Dual Timer Control Box Assembly Pin Connector Socket Terminal Pin/Socket Extraction Tool #8-18 x 7/16 Phillips Pan Head Tek Screw Reversing Timer 24 Volt (for reversing dual timer models Only) American Dryer Corporation 88 Currant Road / Fall River, MA

13 Front Panel/Main Door Assemblies with Mechanical Fasteners Front Panel (refer to Front Panel Assembly on page 13) Door Glass Door Glass/Gasket Adhesive (10.3 oz. cartridge) #10-32 Nylon Acorn Nut (white) Main Door Gasket Door Glass/Gasket Adhesive (10.3 oz. cartridge) White Main Door Assembly with Mechanical Fasteners (includes illus. nos. 2 through 11) White Main Door Ring White 1/4-20 Free Spin Wash Nut White 1/4-20 x 5/8 Carriage Bolt White Main Door Handle White Main Door Hinge Main Door Latch Screw #10-32 S.S. Acorn Nut Friction Door Catch /32 Pop Rivet /4-20 x 3/4 Cap Screw White Top Hinge Block with Cap Screws (includes illus. nos. 14 and 15) White Bottom Hinge Block with Cap Screws (includes illus. nos. 14, 16, and 17) Nylon Washer Telephone: (508) Fax: (508)

14 12 Main Door Switch Assembly #6-32 x 7/8 Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Single-Pole Door Switch /4-20 x 3/4 Cap Screw Main Door Switch Housing ONLY Main Door Switch with Housing Assembly (includes illus. nos. 1 through 4 and 6) #8-18 x 7/16 Phillips Pan Head TEK Screw Bottom Hinge Block (white) (includes illus. nos. 5, 8, and 10) Top Hinge Block (white) (includes illus. nos. 5 and 9) Nylon Washer American Dryer Corporation 88 Currant Road / Fall River, MA

15 Front Panel Assembly White Front Panel Assembly (includes illus. nos. 1, 5, and 6) #10-16 x 1/2 TORX TORX + Bit 1/4 (for removal of TORX head screw) Main Door Hinge (refer to Main Door Switch Assembly on page 12) Lint Drawer Switch (refer to Lint Drawer/Lint Drawer Switch Assemblies on page 14) Friction Door Latch Kit (includes illus. nos. 5 and 6) /32 Pop Rivet Telephone: (508) Fax: (508)

16 14 Lint Drawer/Lint Drawer Switch Assemblies Lint Drawer with Stainless Steel Screen Noise Suppression Tape (sold by the foot) Lint Drawer Switch Pin Connector (female) Socket Terminal Socket/Pin Extraction Tool...Not Illustrated Lint Drawer Switch Box Assembly (includes illus. nos. 3 through 6) Lint Drawer Switch Box Cover ONLY #8-18 x 7/16 Phillips Pan Head TEK Screw Pin Terminal Pin Connector (male) American Dryer Corporation 88 Currant Road / Fall River, MA

17 Basket (Tumbler)/Support Assemblies Basket (tumbler) ONLY /4 Basket (tumbler)/support Assembly Complete (includes illus. nos. 1 through 6 and 8 through 11) #10-16 x 1/2 TORX Head Crimptite Screw TORX + Bit 1/4 Hex (for removal of TORX head screw) Basket (tumbler) Rib Felt Basket (tumbler) Pad (for models mfd. as of January 22, 2002) /16-18 x 3/4 Socket Button Head Screw (for models mfd. prior to January 22, 2002) Basket (tumbler) Support Felt Collar #847 Adhesive for Felt Collar (5 oz. tube) /8 Flat Washer /8-16 x 37 Tie Rod /8-16 Hex Nut /8 Lock Washer Telephone: (508) Fax: (508)

18 16 Basket (Tumbler) Bearing Assembly For Models with Grip Lock Type Bearings American Dryer Corporation 88 Currant Road / Fall River, MA

19 Basket (Tumbler) Bearing Assembly For Models with Grip Lock Type Bearings /4 Flange Bearing /16 Lock Washer /16-12 Hex Nut Pillow Block Bearing Assembly Complete (for microprocessor models Only) (includes illus. nos. 4 through 18, 23, and 24) Pillow Block Bearing Assembly Complete (for dual timer models Only) (includes illus. nos. 4 through 17, 23, and 24) Pillow Block Bearing Platform ONLY (for microprocessor models Only) Pillow Block Bearing Platform ONLY (for dual timer models Only) /8 Pillow Block Bearing (for microprocessor models Only) /8 Pillow Block Bearing (for dual timer models Only) /8-16 x 2 Hex Bolt /8 Flat Washer /8 Flat Washer /8 Lock Washer /8-16 Hex Nut /16-18 Hex Nut /16-18 x 1-1/2 Tap Bolt /16 Lock Washer /8 Flat Washer /16-18 x 3/4 Tap Bolt Sintered 8 Magnet (for microprocessor models Only) Rotational Sensor Assembly (for microprocessor models Only) Shaft Key (for reversing models Only) Pulley (for non-reversing models Only) /4 Pulley (for reversing models Only) Taper Lock Bushing (for reversing models Only) L-680 V-Belt (basket [tumbler] to idler) Grip Lock Collar (1-3/8 ) /16-18 x 1-1/2 Allen Setscrew /16-18 Hex Nut Grip Lock Collar (1-3/4 ) Telephone: (508) Fax: (508)

20 18 Basket (Tumbler) Bearing Assembly For Models with Setscrew Type Bearings American Dryer Corporation 88 Currant Road / Fall River, MA

21 Basket (Tumbler) Bearing Assembly For Models with Setscrew Type Bearings /4 Flange Bearing /16 Lock Washer /16-12 Hex Nut Pillow Block Bearing Assembly Complete (for microprocessor models Only) (includes illus. nos. 4 through 18, 23, and 24) Pillow Block Bearing Assembly Complete (for dual timer models Only) (includes illus. nos. 4 through 17, 23, and 24) Pillow Block Bearing Platform ONLY (for microprocessor models Only) Pillow Block Bearing Platform ONLY (for dual timer models Only) /8 Pillow Block Bearing (for dual timer models Only) /8 Pillow Block Bearing (for microprocessor models Only) /8-16 x 2 Hex Bolt /8 Flat Washer /8 Flat Washer /8 Lock Washer /8-16 Hex Nut /16-24 x 3/8 Setscrew /16-18 Hex Nut /16-18 x 1-1/2 Tap Bolt /16 Lock Washer /8 Flat Washer /16-18 x 3/4 Tap Bolt Sintered 8 Magnet (for microprocessor models Only) Rotational Sensor Assembly (for microprocessor models Only) Shaft Key (for reversing models Only) Pulley (for non-reversing models Only) /4 Pulley (for reversing models Only) Taper Lock Bushing (for reversing models Only) L-680 V-Belt (basket [tumbler] to idler) /16-18 x 1-1/2 Allen Setscrew /16-18 Hex Nut Telephone: (508) Fax: (508)

22 20 Idler Bearing Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

23 Idler Bearing Assembly L-680 V-Belt x 3 Compound Pulley L-550 V-Belt (idler to motor) Non-Reversing Models ONLY L-650 V-Belt (idler to motor) Reversing Models ONLY /16-18 x 1 Allen Setscrew /16 x 3/16 x 1-3/8 Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) /8-16 x 1 Hex Head Machine Bolt /8 Lock Washer /8 Flat Washer Idler Square Washer /16-18 Hex Nut /16-18 x 3 Hex Head Machine Bolt Telephone: (508) Fax: (508)

24 22 Non-Reversing Motor Mount Assembly L-720 V-Belt (idler to motor) /16 x 3/16 x 1 Key /8 x 2-1/4 Motor Pulley (60 Hz Only) /8 x 2-1/2 Motor Pulley (50 Hz Only) /16-18 x 3/4 Tap Bolt /16 Lock Washer /16 Flat Washer HP 115/ v 60 Hz 1ø (for models mfd. as of August 29, 2002) HP v 50 Hz 1ø (for models mfd. as of August 2, 2002) /4 HP 120/208/230v 1ø 60Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with Plug (56Z frame) (for models mfd. prior to August 29, 2002) /4 HP 240v 50 Hz 1ø Motor with Plug (for models mfd. prior to August 2, 2002) American Dryer Corporation 88 Currant Road / Fall River, MA

25 Non-Reversing Motor Mount Assembly (continued) Socket Terminal Pin/Socket Extraction Tool Pin Housing Connector /16-18 Hex Nut /16 Lock Washer /16 Flat Washer Noise Suppression Tape (sold by the foot) /16-18 Nut Non-Reversing Motor Mount ONLY (56Z frame) HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly with Plug Complete (includes illus. nos. 2 through 7 and 13 through 20) HP 230v 1ø 50 Hz Non-Reversing Motor Mount Assembly Complete (includes illus. nos. 2 through 7 and 13 through 20) * 1 1 HP 208/460v 60 Hz 3ø Motor Mount Assembly (includes illus. nos. 2 through 6 and 13 through 22) * 1 1 HP v 50 Hz 3ø Motor Mount Assembly (includes illus. nos. 2 through 6 and 13 through 22) /4 Flat Washer Impellor (3/4 bore) (for 1ø 60 Hz models mfd. as of August 29, 2002 and 50 Hz models mfd. as of August 2, 2002) (for 3ø 50 and 60Hz models mfd. as of December 23, 2002) Impellor (1/2 bore) (for 3ø 60 Hz models mfd. between August 29, 2002 and December 23, 2002 and 50 Hz models mfd. between August 2, 2002 and December 23, 2002) Impellor (1/2 bore) (for 1ø and 3ø 60 Hz models mfd. prior to August 29, 2002 and 1ø and 3ø 50 Hz models mfd. prior to August 2, 2002) /16 x 3/16 x 1-7/8 Key /2 Flat Washer /2-20 Left Hand Jam Nut /8 x 90 Connector HP 208/460v 60 Hz 380v 50 Hz 3ø Motor (for models mfd. as of December 23, 2002) HP 208/460v 60 Hz 380v 50 Hz 3ø Motor (for models mfd. prior December 23, 2002) * Specify voltage when ordering. Telephone: (508) Fax: (508)

26 24 Reversing T.E.F.C. Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

27 Reversing T.E.F.C. Motor Mount Assembly L-650 V-Belt (to idler assembly) /16 x 3/16 x 1 Key /8 x 2-1/2 Motor Pulley (50 Hz Only) /8 x 2-1/4 Motor Pulley (60 Hz Only) /8 x 90 Connector * 1 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) /16-18 x 3/4 Tap Bolt /16 Lock Washer /16 Flat Washer * 1 1/2 HP 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) /8 x 90 Connector /16-18 x 3/4 Tap Bolt /16 Lock Washer /16 Flat Washer /16-18 Nut /16-18 Hex Nut /16 Lock Washer /16 Flat Washer Reversing Motor Mount ONLY (56Z frame) * 1 60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) * 1 50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) Noise Suppression Tape (sold by the foot) /4 Flat Washer /16 x 3/16 x 1-7/8 Key Impellor (1/2 bore) (for 60 Hz models mfd. as of August 29, 2002 and 50 Hz models mfd. as of August 2, 2002) /2 Impellor (1/2 bore) (for 60 Hz models mfd. prior to August 29, 2002 and 50 Hz models mfd. prior to August 2, 2002) ** 1/2 Flat Washer /2-20 Left Hand Jam Nut * Specify voltage when ordering. ** As required. Telephone: (508) Fax: (508)

28 26 Sensor Bracket Assemblies American Dryer Corporation 88 Currant Road / Fall River, MA

29 Sensor Bracket Assemblies /4 Temperature Sensor Probe Assembly (includes illus. nos. 1 through 4) Hi-Limit Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal Socket Terminal Pin/Socket Extraction Tool Pin Connector (female) /4 Push On Fastener #6-32 x 1/4 Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Microprocessor Sensor Bracket ONLY Pin Connector (male) Pin Terminal #8-18 x 7/16 Phillips Pan Head TEK Screw * #6-32 x 1/4 Phillips Round Head Machine Screw º Thermostat º Thermostat º Hi-Limit Thermostat º Thermostat * #6 Star Washer * #6-32 Hex Nut Sensor Jumper * Insulated Terminal * Socket Terminal Pin Connector ONLY (female) Sensor Bracket Harness Assembly (includes illus. nos. 21 through 24) Noncomputer Sensor Bracket Assembly Complete (includes thermostats) (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY Pin Connector (male) * Pin Terminal Pin/Socket Extraction Tool #8-18 x 7/16 Phillips Pan Head TEK Screw * As required. Telephone: (508) Fax: (508)

30 28 Direct Spark Ignition (DSI) Burner Assembly 1* Natural Gas Burner Assembly Complete For Models Mfd. with Natural Gas ONLY (includes illus. nos. 1 through 31) Liquid Propane (L.P.) Gas Burner Assembly Complete For Models Mfd. with Liquid Propane (L.P.) Gas ONLY (includes illus. nos. 1 through 31) Burner Box ONLY ML-758V Liquid Propane (L.P.) Conversion Kit Large Burner Tube /4 Manifold (4-port) Bracket for Horizontal Facing Gas Valve /2 24 VAC Redundant (natural gas) Gas Valve /2 24 VAC Liquid Propane (L.P.) Gas Valve Assembly 6* #30 Burner Orifice (natural gas) ONLY #49 Burner Orifice (liquid propane [L.P.] gas) ONLY American Dryer Corporation 88 Currant Road / Fall River, MA

31 Direct Spark Ignition (DSI) Burner Assembly (continued) #8-32 x 1/2 Pan Head Machine Screw #8-32 Pal Nut #10-16 x 1/2 Hex Washer TEK Screw Ignitor Probe Assembly with 19 Leads #10-16 x 1/2 Hex Head TEK Crimptite Screw #6-32 Hex Nut Direct Spark Ignition (DSI) Module with Three (3) Tries Direct Spark Ignition (DSI) Module Mounting Bracket /2 x 1-1/2 Long Black Nipple /2 Street Elbow /2 Black Union /2 x 29-1/8 Nipple Hi-Limit Thermostat #6-32 Pal Nut #6-32 x 1/2 Phillips Round Head Machine Screw º Hi-Limit Thermostat Pipe Bracket (bent) /4 to 1/2 Reducing Coupling Twin Speed Nut Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4 Pan Head Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) /8 Push On Fastener ** Steam to Gas Interface Plate...Not Illustrated * Consult factory for elevations over 2,000 feet. ** Needed when converting from steam to gas heat. Telephone: (508) Fax: (508)

32 30 Electric Oven Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

33 Electric Oven Assembly Large Electric Oven Box ONLY * 1 Electric Oven Assembly Complete * - Electric Element #10-16 x 1/2 Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2 Hex Washer TEK Screw Sail Switch Box Cover and Bracket ONLY Sail Switch #4 x 3/4 Phillips Pan Head Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) /8 Push On Fastener #10-16 x 1/2 Hex Washer TEK Screw Electric Oven Front Cover Large Relay Box Cover #8-18 x 7/16 Phillips Pan Head TEK Screw º Hi-Limit Thermostat #10-16 x 1/2 Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug /4-20 Free Spin Wash Nut * 1 Oven Relay #10-24 x 1/2 Phillips Pan Head Machine Screw Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar (sold by the foot) * - Oven Wiring #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ** 1 Steam to Electric Transition Plate...Not Illustrated * Refer to Electric Oven Component Application Chart on page 48. ** Needed when converting dryer from steam heat to electric heat. Telephone: (508) Fax: (508)

34 32 Air-Operated Steam Damper Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

35 Air-Operated Steam Damper Assembly Steam Coil Assembly /16 Lock Washer /16-18 Hex Nut /4-20 Hex Nut /4 Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) /4 Lock Washer /4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2 length) /16-20 Stainless Steel Acorn Nut /16-20 Hex Nut /4 Bore x 3 Stroke Piston Piston Support Bracket /4-20 Hex Nut /4 Lock Washer /4 x 1/8 Connector /4 Tubing (sold by the foot) /4 x 1/8 Connector /8 Needle Valve /8 Close Nipple Way Micro Valve - 24 VAC #6-32 x 1 Slotted Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket /4-20 Hex Nut /4 Lock Washer /8 N.P.T. Silencer (muffler) Telephone: (508) Fax: (508)

36 34 FSS Temperature Probe Assembly Fire Suppression System (FSS) Temperature Probe Assembly (includes illus. nos. 1 through 5) Push On Fastener Sensor Bracket #8-18 Phillips Pan Head TEK Screw Pins Connector ONLY...Not Illustrated American Dryer Corporation 88 Currant Road / Fall River, MA

37 FSS Solenoid Assembly Fire Suppression System (FSS) Solenoid Valve 24V 50/60 Hz /8 F.P.T. Brass Tee /8 M.P.T. Brass Plug /8 Comp x 3/8 M.P.T. Brass Connector * 6' 3/8 OD x Wall Copper Tubing Sprinkler Head Mounting Plate /8 N.P.T. Brass Locknut /8 Brass Elbow #10 x 1/2 Self Drilling Screw #8-18 x 7/16 TEK Screw GPM 3/8 F.P.T. Spray Nozzle /2 to 3/8 Bushing Arc Suppressor * Sold by the foot. Telephone: (508) Fax: (508)

38 36 Single-Phase (1ø) MP Rear Electric Relay Panel Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

39 Single-Phase (1ø) MP Rear Electric Relay Panel Assembly #6-32 Pal Nut #10-16 x 1/2 Hex Washer TEK Screw #6-32 x 1-1/4 Phillips Pan Head Machine Screw Position Terminal Block Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete Volt (for gas models Only) (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete Volt (for steam models Only) (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete Volt (for gas models Only) (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete Volt (for steam models Only) (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete Volt (for electric models Only) (includes illus. nos. 1 through 14 and 16) Transformer Assembly Volt Transformer Assembly Volt (for gas and steam models Only) Transformer Assembly Volt (for electric models Only) * Fuse Holder * 1/2-Amp (Slo-Blo) Fuse #8-18 x 7/16 Phillips Pan Head TEK Screw #10 x 1/2 Green Hex Washer TEK Screw /16-18 Hex Nut L-70 Ground Lug /16 Lock Washer Pole Contactor Open/Closed Bushing V SPST Relay (for electric models Only) * Quantity is 1 for 115v and 2 for v. Telephone: (508) Fax: (508)

40 V 3-Phase (3ø) MP Rear Electric Relay Panel Assembly #6-32 Pal Nut #10-16 x 1/2 Hex Washer TEK Screw #6-32 x 1-1/4 Phillips Pan Head Machine Screw Position Terminal Block Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete Volt (for gas models Only) (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete Volt (for steam models Only) (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete Volt (for electric models Only) (includes illus. nos. 1 through 14 and 16) Transformer Assembly (for gas and steam models Only) Transformer Assembly (for electric models Only) Fuse Holder /2-Amp (Slo-Blo) Fuse #8-18 x 7/16 Phillips Pan Head TEK Screw #10 x 1/2 Green Hex Washer TEK Screw /16-18 Hex Nut L-70 Ground Lug /16 Lock Washer Pole Contactor Open/Closed Bushing V SPST Relay (for electric models Only) American Dryer Corporation 88 Currant Road / Fall River, MA

41 480V MP Rear Electric Relay Panel Assembly #10-16 x 1/2 Hex Washer TEK Screw #6-32 x 1-1/4 Phillips Pan Head Machine Screw Position Terminal Block Pole 1-Amp Circuit Breaker Transformer Assembly Volt x 15mm Din Rail End Stop #8-18 x 7/16 Phillips Pan Head TEK Screw #10 x 1/2 Green Hex Washer TEK Screw /16-18 Hex Nut L-70 Ground Lug /16 Lock Washer Pole Contactor Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete Volt (for gas models Only) (includes illus. nos. 1 through 15, and 17) Rear Electric Panel Assembly Complete Volt (for steam models Only) (includes illus. nos. 1 through 15, and 17) Rear Electric Panel Assembly Complete Volt (for electric models Only) (includes illus. nos. 1 through 17) #6-32 Pal Nut V SPST Relay (for electric models Only) Ground Label Telephone: (508) Fax: (508)

42 V MP Reversing Rear Electric Relay Panel Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

43 V MP Reversing Rear Electric Relay Panel Assembly #10-16 x 1/2 Hex Washer TEK Screw #6-32 x 1-1/4 Phillips Pan Head Machine Screw Position Terminal Block Pole Reversing Contactor Transformer Assembly Volt (for gas and steam models Only) Transformer Assembly Volt (for electric models Only) Fuse Holder /2-Amp (Slo-Blo) Fuse #8-18 x 7/16 Phillips Pan Head TEK Screw #10 x 1/2 Green Hex Washer TEK Screw /16-18 Hex Nut L-70 Ground Lug /16 Lock Washer Pole Contactor Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete Volt (for gas models Only) (includes illus. nos. 1 through 16) Rear Electric Panel Assembly Complete Volt (for steam models Only) (includes illus. nos. 1 through 16) Rear Electric Panel Assembly Complete Volt (for electric models Only) (includes illus. nos. 1 through 17) #6-32 Pal Nut Standard End Bracket V SPST Relay (for electric models Only) Telephone: (508) Fax: (508)

44 V MP Reversing Rear Electric Relay Panel Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

45 V MP Reversing Rear Electric Relay Panel Assembly #10-16 x 1/2 Hex Washer TEK Screw #6-32 x 1-1/4 Phillips Pan Head Machine Screw Position Terminal Block Pole 1-Amp Circuit Breaker Transformer Assembly Volt x 15mm Din Rail Standard End Bracket #8-18 x 7/16 Phillips Pan Head TEK Screw #10 x 1/2 Green Hex Washer TEK Screw /16-18 Hex Nut L-70 Ground Lug /16 Lock Washer Pole Contactor Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete Volt (for gas models Only) (includes illus. nos. 1 through 17) Rear Electric Panel Assembly Complete Volt (for steam models Only) (includes illus. nos. 1 through 17) Rear Electric Panel Assembly Complete Volt (for electric models Only) (includes illus. nos. 1 through 18) #6-32 Pal Nut Pole Reversing Contactor Ground Label V SPST Relay (for electric models Only) Telephone: (508) Fax: (508)

46 44 Single-Phase (1ø) D.T. Rear Electric Relay Panel Assembly #10-16 x 1/2 Hex Washer TEK Screw VAC Transformer (for 115 volt gas models Only) ** 24 VAC Transformer (for volt gas models Only) Pole Contact Block (for volt models Only) Pole Contactor (for 120 volt models Only) Pole Contactor (for volt models Only) Pole Contact Block (for 120 volt models Only) * #8-18 x 7/16 Phillips Pan Head TEK Screw * Fuse Holder * 1/2-Amp (Slo-Blo) Fuse /16 Lock Washer /16-18 Hex Nut #10 x 1/2 Hex Washer TEK Screw - Green L-70 Ground Lug #10-16 x 1/2 Hex Washer TEK Screw Rear Panel Connector Bracket Rear Electric Mounting Panel ONLY Rear Electric Panel Assembly Complete Volt gas ONLY (includes illus. nos. 1, 2, and 4 through 18) ** Rear Electric Panel Assembly Complete Volt gas ONLY (includes illus. nos. 1 through 4 and 6 through 18) #6-32 x 1-1/4 Phillips Round Head Machine Screw Position Terminal Block #6-32 Pal Nut Open/Closed Bushing * Quantity is 1 for 115v and 2 for v. ** Not available at time of printing. Contact factory for additional information. American Dryer Corporation 88 Currant Road / Fall River, MA

47 V D.T. Rear Electric Relay Panel Assembly #10-16 x 1/2 Hex Washer TEK Screw #6-32 x 1-1/4 Phillips Round Head Machine Screw Position Terminal Block VAC Transformer (gas models Only) Amp Double-Pole Circuit Breaker Din Rail (sold by the inch) #10 x 1/2 Hex Washer TEK Screw - Green /16-18 Hex Nut L-70 Ground Lug /16 Lock Washer Pole Contactor Rear Electric Mounting Panel ONLY Rear Electric Panel Assembly Complete (for gas models Only) (includes illus. nos. 1 through 15) #6-32 Pal Nut Din Rail End Stop Pole Contact Block Telephone: (508) Fax: (508)

48 V D.T. Reversing Rear Electric Relay Panel Assembly #6-32 x 1-1/2 Phillips Round Head Machine Screw Position Terminal Block #10-16 x 1/2 Hex Washer TEK Screw Rear Panel Connector Bracket Reversing Contactor Blower Motor Contactor /16-18 Hex Nut /16 Lock Washer Rear Electric Mounting Panel ONLY Rear Electric Panel Assembly Complete (for gas models Only) (includes illus. nos. 1 through 17) #6-32 Pal Nut Pole Contact Block VAC Transformer (for gas models Only) Fuse Holder /2-Amp (Slo-Blo) Fuse #8-18 x 7/16 Phillips Pan Head TEK Screw L-70 Ground Lug #10 x 1/2 Hex Washer TEK Screw - Green American Dryer Corporation 88 Currant Road / Fall River, MA

49 Outer Top/Back Guard Assemblies Back Electrical Box Cover #8-18 x 7/16 Phillips Pan Head TEK Screw 3* Top Back Guard (for gas models Only) Top Back Guard (for electric models Only) #8-18 x 7/16 Phillips Pan Head TEK Screw #10-16 x 1/2 Hex Washer TEK Screw 6* Gas Outer Top Electric Outer Top Bottom Back Guard #8-18 x 7/16 Phillips Pan Head TEK Screw Leveling Leg * There is no outer top or top back guard on steam models. Telephone: (508) Fax: (508)

50 48 Electric Oven Component Application Chart KW VOLTAG E PHAS E WIR E OVEN ASSEMBLY ELEMENT OVEN WIRE WITH CRIMP TERMINAL TERMINAL LUG Qty. K w P art No. Qty. S iz e P art No. Q ty. art No. BUS BAR P/N: OVEN RELAY P C at. No. Part No Ø # DPA Ø # DPA Ø # DPA American Dryer Corporation 88 Currant Road / Fall River, MA

51 Additional Parts Available 49 Part No. Description Clean Lint Screen Label CAUTION - Exhaust/Lint Screen Label WARNING - Fire Hazards Label /8 Straight (BX) Connector /8 x 45 (BX) Connector /8 Red Jacket (BX) Insulator /8 Jiffy Clip (BX retainer clip) /8 Greenfield (BX) /4 In-Line Connector Red Butt Connector #74B Wire Nut Crimp-On Wire Nut /4 Insulated (female) Terminal /2 Harness Tie Harness Tie Harness Tie Mounting Clip Manometer (hydro gauge) for Measuring Gas Pressure White Brush-In-Cap Bottle Touch-Up Paint Basket (tumbler) Bearing Puller Telephone: (508) Fax: (508)

52 ADC /25/ * 01/30/03-15