1F95EZ-0671 Non-Programmable 7 Day. Maximum Stages Heat/Cool 1/1 2/2 3/1 4/2

Size: px
Start display at page:

Download "1F95EZ-0671 Non-Programmable 7 Day. Maximum Stages Heat/Cool 1/1 2/2 3/1 4/2"

Transcription

1 Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. APPLICATIONS Thermostat Configuration Options Single Stage 1 No Heat Pump (SS1) Multi Stage 2 No Heat Pump (MS2) THERMOSTAT APPLICATION GUIDE Thermostat Applications Gas, Oil, Electric, Heat Only, Cool Only or Heat/Cool s, 2 or 3 wire Hydronic Zone (Hot Water or Steam) s, or Millivolt Maximum Stages Heat/Cool 1/1 2/2 Blue Easy Reader Thermostat Single Stage, Multi-Stage, Heat Pump Installation and Operating Instructions for l: l Programming Choices 1F95EZ-0671 Non-Programmable 7 Day 1F95EZ-0671 Thermostat Heat Pump 1 Single Stage Compressor Heat Pump (HP1) Single Stage Compressor Heat Pump s - up to 2 Stages Aux./Emergency Heat 3/1 Heat Pump 2 Two Stage or Two Compressor Heat Pump (HP2) Two Stage or Two Compressor Heat Pump systems - up to 2 Stages Aux./Emergency Heat 4/2 SPECIFICATIONS Electrical Rating: Battery Power mv to 30 VAC, NEC Class II, 50/60 Hz or DC Input-Hardwire to 30 VAC Terminal Load A per terminal, 2.5A maximum all terminals combined Setpoint Range to 99 F (7 to 32 C) Differential (Single Stage) Heat 0.6 F; Cool 1.2 F Differential (Multi-Stage) Heat 0.6 F; Cool 1.2 F Differential (Heat Pump) Heat 1.2 F; Cool 1.2 F Operating Ambient F to +105 F (0 to +41 C) Operating Humidity % non-condensing max. Shipping Temperature Range to +150 F (-40 to +65 C) Dimensions Thermostat "H x 6.4"W x 1.7"D! CAUTION To prevent electrical shock and/or equipment damage, disconnect electric power to system at main fuse or circuit breaker box until installation is complete. Index Page Installation 2 Wiring Connections 2 Wiring Diagrams 3 Thermostat Quick Reference 4 Installer Confi guration Menu 5 Operating Your Thermostat 7 Troubleshooting 8 ATTENTION: MERCURY NOTICE This product does not contain mercury. However, this product may replace a product that contains mercury. Mercury and products containing mercury must not be discarded in household trash. Do not touch any spilled mercury. Wearing non-absorbent gloves, clean up any spilled mercury and place in a sealed container. For proper disposal of a product containing mercury or a sealed container of spilled mercury, place it in a suitable shipping container. Refer to for location to send product containing mercury. PART NO A 0846

2 INSTALLATION Remove Old Thermostat Before removing wires from old thermostat, mark wires for terminal identifi cation so the proper connections will be made to the new thermostat. Installing New Thermostat 1. Pull the thermostat body off the thermostat base. Forcing or prying on the thermostat will cause damage to the unit. 2. Place base over hole in wall and mark mounting hole locations on wall using base as a template. 3. Move base out of the way. Drill mounting holes. If you are using existing mounting holes and the holes drilled are too large and do not allow you to tighten base snugly, use plastic screw anchors to secure the base. 4. Fasten base snugly to wall using mounting holes shown in Figure 1 and two mounting screws. Leveling is for appearance only and will not affect thermostat operation. 5. Connect wires to terminal block on base using appropriate wiring schematic. 6. Push excess wire into wall and plug hole with a fi re resistant material (such as fi berglass insulation) to prevent drafts from affecting thermostat operation. 7. Carefully line the thermostat up with the base and snap into place. Battery Location 2 "AA" alkaline batteries are included in the thermostat at the factory with a battery tag to prevent power drainage. Remove the battery tag to engage the batteries. To replace batteries, set system to OFF, remove thermostat from wall and install the batteries in the rear along the top of the thermostat (see Figure 1). For best results, use a premium brand "AA" alkaline battery such as Duracell or Energizer. If the home is going to be unoccupied for an extended period (over 3 months) and is displayed, the batteries should be replaced before leaving. Power Stealing Switch The Power Stealing Switches (Fig. 1) should be left in the "On" position for most systems. The information in the following table details the thermostat power method and switch options. WIRING CONNECTIONS Refer to equipment manufacturers' instructions for specifi c system wiring information. After wiring, see CONFIGURA- TION section for proper thermostat confi guration. 2! WARNING Thermostat installation and all components of the control system shall conform to Class II circuits per the NEC code. Terminal Designation Thermostat Power Method Battery Powered, no system power available. Hardwired with Battery Back-up, for systems with common connection from transformer to "C" terminal on thermostat. *Battery Powered with Power Stealing Assist, for systems with no common connection from transformer to "C" terminal on thermostat. TERMINAL DESIGNATION DESCRIPTIONS Description If the Power Stealing Assist method is not compatible with your system, place the Power Stealing Switches to "Off". This cancels Power Stealing Assist, operates the thermostat on batteries and corrects the condition. Figure 1 Thermostat Base Multi-Stage 1F95EZ-0671 Mounting Hole Place Level across Mounting Tabs (for appearance only) Rear view of thermostat 2 "AA" Batteries Power Stealing Switches Wiring diagrams shown are for typical systems and describe the thermostat terminal functions. O/B...Changeover valve for heat pump energized constantly in cooling and off/heating Y2...2nd Stage Compressor Y...Compressor Relay G...Fan Relay RC...Power for Cooling RH...Power for Heating C...Common wire from secondary side of cooling (Optional). Required for fault indication, continuous backlight operation or remote temperature sensor operation 6 Powered closed 3rd wire for 3-wire zone valve W/E...Heat Relay/Auxiliary Heat Relay (Stage 1) (3rd Stage Heat in HP2) W2...2nd Stage Heat (4th Stage Heat in HP2) L...Compressor diagnostic indicator for systems with diagnostic connection typically found on Heat pump systems or with Copeland's Comfort Alert * Switch Position/Description Switches "On", thermostat runs on batteries. Switches "On", thermostat runs on power directly from transformer with battery backup. Switches "On", thermostat runs on batteries and supplemental power drawn through the heat or cool circuit. *Power Stealing Assist is very reliable to increase battery life, but on a small number of heating or cooling systems with high impedance electronic modules you may observe one of the following conditions: 1. The furnace draft inducer motor may run with no call for heat. 2. The furnace fan may turn on with no call for heat or may not turn off. 3. The furnace may not turn off when the call for heat ends. 4. The air conditioner may not turn off when the call for cool ends. Place Level across Mounting Tabs (for appearance only) * A1 For Damper Control Not Applicable To This l. Mounting Hole

3 WIRING DIAGRAMS Single Stage 1 (SS1) Comfort Alert II Module or Similar Diagnostic Module See Module Instructions for details Figure 2 Single Stage or Multi-Stage (No Heat Pump) with Single Transformer L O/B O Diagnostic Energized Constantly Indicator in No Input Heat Cool Output or Cool 1st Stage 1st Stage B Malfunction Cool Energized Constantly Switch in Heat, Off, Input 2nd Emergency Stage Y Y2 W/E W2 G RH RC C 6 No Output Heat 2nd Stage Blower/ Circulator Fan Energized on Call for Cool (and Heat if configured for Electric Heat) * Common connection required for diagnostic or malfunction indication. (Hot) Heat Jumper (Hot) Cool HEAT PUMP TYPE 1 (HP 1). Single stage compressor system; gas or electric backup. HEAT PUMP TYPE 2 (HP 2). Multi-stage compressor or two compressor system with gas or electric backup. After wiring, see INSTALLER CONFIGURA- TION section for proper thermostat confi guration. Multi- Stage 2 (MS2) Optional* (Common) TRANSFORMER Figure 3 Single Stage or Multi-Stage (No Heat Pump) with Two Transformers Jumper Remove Jumper Wire between RH & RC Single Stage, Multi-Stage and Heat Pump Connections Refer to equipment manufacturers' instructions for specifi c system wiring information. This thermostat is designed to operate a single-transformer or two-transformer system. You can confi gure the thermostat for use with the following systems: SINGLE STAGE (SS 1) gas, oil or electric. MULTI-STAGE (MS 2) gas, oil or electric. L O/B Y Y2 W/E W2 G RH RC C Diagnostic Indicator (Optional) O Energized Constantly in Cool B Energized Constantly in Heat, Off, Emergency Single Stage 1 (SS1) Multi- Stage 2 (MS2) Blower/ No Output Circulator No Heat Fan Energized Optional* Cool Output on Call for (Hot) (Hot) 1st Stage 1st Stage Cool (and Heat Cool (Common) Cool Heat Heat if 2nd Stage configured 2nd for Electric Stage Heat) HEATING TRANSFORMER * Common connection required for diagnostic or malfunction indication. COOLING TRANSFORMER Figure 4 Heat Pump s Jumper L O/B Y Y2 + W/E + W2 G RH RC C 6 Heat Pump 1 (HP1) Heat Pump 2 (HP2) Diagnostic Indicator or Malfunction Switch O Energized in Cool B Energized in Heat, Off, Emergency Heat and Cool 1st Stage (Compressor) No Output Heat - 2nd Heat - 3rd Stage, Emergency Stage, Emergency - 1st Stage - 2nd Stage + Note: Dual Fuel option + Note: Dual Fuel option de-energizes Heat mode de-energizes Heat mode stage 1 (compressor) stage 1 (compressor) when auxiliary heat when auxiliary heat is energized is energized Heat - 3rd Stage, Emergency - 1st Stage + Note: Dual Fuel option de-energizes Heat mode stage 1 (compressor) when auxiliary heat is energized Heat -4th Stage. Emergency - 2nd Stage + Note: Dual Fuel option de-energizes Heat mode stage 1 (compressor) when auxiliary heat is energized Blower/ Circulator Fan Energized on Call for Heat or Cool. (Hot) Set Elect/Gas Heat Option for Emergency mode 2nd Stage (Compressor) Optional* (Hot) (Common) Cool Comfort Alert II Module or Similar Diagnostic Module See Module Instructions for details * Common connection required for diagnostic or malfunction indication. + Dual Fuel option, if selected turns off compressor(s) when Auxiliary stages energize. Figure 5 3-Wire (SPDT) Heat Only Zone Valve Wiring Jumper 6 Y W G RH RC C Single Stage 3-wire Zone Valve application Closes Valve (6) Opens Valve (4) Blower/Circulator Fan Energized (Hot) (Hot) Heat Cool (5) Constant (Common) TRANSFORMER 3

4 THERMOSTAT QUICK REFERENCE Home Screen Description Figure 6 Home Screen Display Room Temperature Setting Temperature Battery Level Indicator Indicating the current power level of the 2 AA batteries. Full power remaining. Half power remaining. Change The batteries should be replaced at this time with 2 new premium brand AA Alkaline batteries. (See page 2 for more details). Indicators Fan Indicator Figure 7 Programming & Configuration Items Programming and Configuration Items 1 Heat" A/C Off identifi es button. When fi lled indicates system mode selected. 2 "Aux" inidicates thermostat confi gured for Heat Pump. When fi lled indicates Auxiliary stage is operating. 3 "Adv Day" identifi es button when in schedule mode. 4 "Time" identifi es button when in schedule mode. 5 "Fan" identifi es button. When fi lled indicates Fan is on. 6 "Run" identifi es button to begin normal operation. 7 "Sched" identifi es button to be used during programming or "Run Sched" identifi es button to return to normal operation. 8 "Hold" "Copy" "Menu" identifi es button. 9 "Limit" indicates temperature is adjusted to the limit set in the confi guration menu. 10 "Setting" indicates the setpoint temperature. 11 "Hold Temp" indicates temporary hold or "Hold" indicates hold mode. 12 "Morn" "Day" "Eve" "Night" indicates period being programmed or current program in Run mode. 13 "A" "P" indicates time as Morning (A) or Evening (P). 14 "Mon - Sun" indicates day of week. 15 "Month" "Year" "Date" indicates the Month Year or Date when setting time. 16 "Call For Service" indicates a diagnostic fault in the heating/cooling system. It does not inidicate a fault in the thermostat. 17 "Change" indicates when batteries are low and should be replaced. 4

5 INSTALLER/CONFIGURATION MENU With Heat or A/C selected, press and hold the Menu button for at least 5 seconds. The display will show item #1 in the table below. Press Menu to advance to the next menu item. Press or to change a menu item options. Menu Ref. HP SS Press Button Displayed (Factory Default) INSTALLER/CONFIGURATION MENU Press or to select from listed options Comments MENU (MS 2) HP 1, HP 2, SS 1 Selects Multi-Stage (MS 2 No Heat Pump), Heat Pump 1 (HP 1, 1 compressor), Heat Pump 2 (HP 2, 2 compressor or 2 speed compressor), or Single Stage (SS 1) MENU (GAS) for SS or MS ELE GAS setting: furnace controls the blower ELE setting: thermostat controls the blower MENU E (On) OFF Selects Energy Management Recovery (EMR) On or OFF. (Not available in -non-programmable mode) 4 4 MENU CR Heat (ME) SL, FA Selects Adjustable Anticipation, cycle rate, Heat (This item only appears when MS 2 or SS 1 is selected above) 5 4 MENU CR Heat A/C (ME) MENU CR A/C (ME) or CR Aux Heat (FA) SL, FA SL, FA SL Selects Adjustable Compressor Anticipation (Heat Pump) This item only appears when HP 1, HP 2 is selected above Selects Adjustable Anticipation, cycle rate, cool (when MS 2 or SS 1 is selected above.) or Selects the cycle rate for Auxiliary stage (when HP 1 or HP 2 is selected above) MENU CL (OFF) CL On Compressor Lockout Time MENU Heat A/C Off or Aux Heat A/C Off Heat A/C Off, Heat Off with Fan icon, Heat Off without Fan icon A/C Off Confi guration with Automatic Changeover capability MENU CO (OFF) CO On Selects Compressor Optimization MENU dl (On) dl OFF Selects Display Light On or OFF MENU 0 HI (current temperature) 1 HI, 2 HI, 3HI, 4 HI, 1 LO, 2 LO, 3 LO, 4 LO Adjustable Ambient Temperature Display MENU F C Selects Fahrenheit/Celsius Temperature Display MENU P (0) 7 Defaults to P (0) non-programmable P (7) is 7-day programming MENU PS (2) 4 Selects Program periods per day: 4 = Morn, Day, Eve, Night 2 = Day, Night MENU Heat FA (On) OFF Fast Heat option may be disabled by selecting OFF. NA to SS or HP1 confi g MENU A/C FA (On) OFF Fast Cool option may be disabled by selecting OFF. NA to SS or HP1 confi g MENU ds (On) Off Selects Automatic Daylight Saving Time option MENU HL Heat 62 to 98 Select's Limited HEAT Range (99) MENU LL A/C 46 to 82 Select's Limited A/C Range (45) MENU df (0) 1 to 9 Selects df (dual Fuel) setting. 0 is Off (If dual Fuel option is required, a selection of 5 is recommended) MENU Cd (60) 0 to 99 Selects compressor delay in seconds when df is greater than MENU A/C On (o) Heat On (b) Selects operation of the reversing valve terminal (O/B) output as an O or B terminal 5

6 INSTALLER/CONFIGURATION MENU 1) This control can be configured for: MS 2 Multi-Stage (no heat pump) HP 1 Heat Pump with one stage of compressor HP 2 Heat Pump with two stage compressor or two compressor system, Gas or Electric backup SS 1 Single Stage 2) GAS or Electric (ELE) fan operation. If the heating system requires the thermostat to energize the fan, select ELE. Select GAS if the heating system energizes the fan on a call for heat. 3) Energy Management Recovery: (this step is skipped if configured to be non-programmable). Energy Management Recovery (E) On enables the thermostat to start heating or cooling early to make the building temperature reach the program setpoint at the time you specify. Heating will start 5 minutes early for every 1 of temperature required to reach setpoint. Example: E On is selected and your heating is programmed to 65 at night and 70 at 7 AM. If the building temperature is 65, the difference between 65 and 70 is 5. Allowing 5 minutes per degree, the thermostat setpoint will change to 70 at 6:35 AM. Cooling allows more time per degree, because it takes longer to reach set temperature. 4, 5 & 6) Cycle Rate Selection The factory default setting for Heat and Cool modes, SS1, MS2, is medium cycle (ME). For Heat Pump, HP1, HP2, the default setting is medium (ME). For Aux the default setting is fast cycle (FA). To change cycle rate, press the or button. Cycle rate differentials for different settings are: MODE Fast Medium Slow FA ME SL Heat (SS1, MS2) 0.4 F 0.6 F 1.7 F Cool (SS1, MS2) 0.9 F 1.2 F 1.7 F Heat Pump (HP1, HP2) 0.9 F 1.2 F 1.7 F AUX (HP1, HP2) 0.6 F F 7) Select Compressor Lockout CL OFF or ON Selecting CL ON will cause the thermostat to wait 5 minutes between cooling cycles. This is intended to help protect the compressor from short cycling. Some newer compressors already have a time delay built in and do not require this feature. Your compressor manufacturer can tell you if the lockout feature is already present in their system. When the thermostat compressor time delay occurs, it will fl ash the setpoint for up to five minutes. 8) Configuration This thermostat is configured for Heat and Cool (SYSTEM switch with Cool Off Heat) default. It can also be configured for Heat and Cool (Heat, Cool, Off), Heat only with fan (Off Heat), Heat only without fan, and Cool only (Cool Off). 9) Compressor Optimization CO provides a delay in circulator fan operation after the compressor turns on or off. With CO selected ON, when the compressor turns on (for a call for heat in heat pump or a call for cool) the fan will be delayed for fi ve seconds before turning on to allow the air to be heated or cooled. After the compressor turns off for call for cool, the fan will continue to run for 20 seconds to circulate all of the cooled air. If CO is set to OFF, there will be no delay in fan operation. 10) Select Backlight Display The display backlight improves display contrast in low lighting conditions. When the "C" terminal is powered, selecting backlight dl ON will keep the light on continuously. Select backlight OFF will turn the light on momentarily after any button is pressed. When the "C" terminal is not powered, the light will be on momen- tarily after any button is pressed no matter whether the backlight is selected ON or OFF. 11) Select Temperature Display Adjustment 4 LO to 4 HI Allows you to adjust the room temperature display up to 4 higher or lower. Your thermostat was accurately calibrated at the factory, but you have the option to change the display temperature to match your previous thermostat. The current or adjusted room temperature will be displayed. 12) Select F or C Readout Changes the display readout to Celsius or Fahrenheit as required. 13) Program Options: Selects confi guration for 7 day (7) or non-programming (0) mode. The default setting is 0, indicating non-programming. The programs per week can be changed by pressing the or buttons. A selection of 0 days for non-programmable will eliminate the need for EMR, and that step in the menu will be skipped. 14) Program Steps per day This control can be confi gured for 4 or 2 program steps per day. Default is "PS" and can be toggled between 4 PS and 2 PS. 15 & 16) Select Fast Second Stage ON or OFF Heat pump or Multi-stage only, in the run mode, with the fast Heat feature enabled (FA Heat On), if the Heat setpoint temperature is manually raised by 3 F (2 C) or more above the actual temperature using the second stage will energize immediately. With FA OFF, second stage will not energize until the setpoint temperature is 1 F or more above actual temperature for more than ten minutes. The Fast Cool feature (FA Cool) provides the same controls when the setpoint temperature is lowered. 17) Select Daylight Saving Time Calculation This feature will allow the thermostat to calculate the DST automatically and apply it to the Real Time Clock display. Default On. Use or touch keys to select the feature OFF. 18) Limited Heat Range This feature provides a maximum setpoint temperature for heat. The default setting is 99 F. It can be changed between 62 F and 98 F by pressing the or button. 19) Limited Cool Range This feature provide a minimum setpoint temperature for cool. The default setting is 45 F. It can be changed between 46 F and 82 F by pressing the or button. 20) Select Dual Fuel (df) Selects dual fuel setting 0 to 9 (0 is default OFF, for Elect AUX) if your system has a fossil fuel (gas or oil) Auxiliary heat. HP1 or HP2 only. Select Compressor Delay (Cd) After the auxiliary heat is turned on, the compressor(s) shut down is delayed for the time selected (in seconds). This delay is factory set to 60, but can be set in the range of 0 to 99 using or buttons. Available only if df 1 to 9 is selected above. 21) Select Reversing Valve Output The O/B option is factory set at "O" position. This will accommodate the majority of heat pump applications, which require the changeover relay to be energized in COOL. If the thermostat you are replacing or the heat pump being installed with this thermostat requires a "B" terminal, to energize the changeover relay in HEAT, the O/B option should be set at "B" position. 6

7 OPERATING YOUR THERMOSTAT Check Thermostat Operation NOTE To prevent static discharge problems, touch side of thermostat to release static build-up before touching any keys. If at any time during testing your system does not operate properly, contact a qualifi ed service person. Fan Operation If your system does not have a G terminal connection, skip to Heating. 1. Turn on power to system. 2. Press FAN button. The display will show "Fan" and the blower should begin to operate. 3. Press FAN button again. The display will show "Fan" outlined and the blower should stop immediately.! CAUTION Do not allow the compressor to run unless the compressor oil heaters have been operational for 6 hours and the system has not been operational for at least 5 minutes. Heating 1. Press the HEAT button to select HEAT. If the auxiliary heating system has a standing pilot, be sure to light it. 2. Press to adjust thermostat setting to 1 above room temperature. The heat pump system should begin to operate. The display should show Heat. However, if the system confi guration is set to HP1 or HP2 and setpoint temperature display is fl ashing, the 5 minute compressor lockout feature is operating (see Confi guration menu, item 7). 3. Adjust temperature setting to 3 above room temperature. If your system confi guration is set at MS2, HP2 or HP1, the auxiliary heat system should begin to operate and the display will show "Aux" and "Heat". 4. Press to adjust the thermostat below room temperature. The heating system should stop operating. Auxiliary (Emergency) AUX bypasses the Heat Pump to use the heat source wired to terminal W/E on the thermostat. AUX is typically used when compressor operation is not desired, or you prefer back-up heat only.! CAUTION To prevent compressor and/or property damage, if the outdoor temperature is below 50 F, DO NOT operate the cooling system. Cooling 1. Press A/C button to select A/C. 2. Press to adjust thermostat setting below room temperature. The blower should come on immediately on high speed, followed by cold air circulation. The display should show A/C. If the setpoint temperature display is fl ashing, the compressor lockout feature is operating (see Confi guration menu, item 7). 3. Adjust temperature setting to 3 below room temperature. The second stage cooling should begin to operate. A click from the thermostat will be heard to confi rm second stage. 4. Press to adjust the temperature setting above room temperature. The cooling system should stop operating. Dual Fuel Temperature Setpoint and Compressor Delay When the thermostat is confi gured for Heat Pump mode and the Dual Fuel feature is selected, the thermostat can use software logic to determine when to switch to gas heat and shut down the compressor. This eliminates the need for a fossil fuel kit. The user selectable temperature is called the dual fuel temperature setpoint (df) and is set in the Installer/Confi guration menu, item 20. A software logic based dual fuel number from 1 to 9 can be selected. A selection of 5 is recommended. A higher number will provide a larger stage separation. A lower number will provide a smaller separation. After the dual fuel temperature setting is selected, press Menu. A compressor delay (Cd) can be set for compressor shutdown after the auxiliary stage is energized. This delay will minimize the time the system may blow cooler air until the alternate source of heat comes on. Default setting for delay is 60 seconds. This delay can be set from 0 to 99 seconds using the or buttons. Compressor Delay (Cd) will not be available if df is selected 0 (off). 1. Press and hold HEAT button for at least 5 seconds to select "AUX". 2. Press to adjust thermostat setting above room temperature. The Auxiliary heating system will begin to operate. The display will show AUX and HEAT. 3. Press to adjust the thermostat below room temperature. The Auxiliary heating system should stop operating. 4. To return to Heat Pump mode press HEAT button. "Aux" will dsplay. 7

8 TROUBLESHOOTING Reset Operation Note: When thermostat is reset, installer confi guration menu settings and programming will reset to factory settings. If a voltage spike or static discharge blanks out the display or causes erratic thermostat operation, you can reset the thermostat by removing the wires from terminals RH and RC (do not short them together) and removing batteries for 2 minutes. After resetting the thermostat, replace the wires and batteries. If the thermostat has been reset and still does not function correctly contact your heating/cooling service person or place of purchase. Note: Be sure to review the installer confi guration menu settings. To reset the programming, clock and confi guration settings, press the and FAN button simultaneously. The thermostat should go blank and then all segments will be displayed momentarily. Symptom Possible Cause Corrective Action No Heat/No Cool/No Fan (common problems) No Heat No Cool Heat, Cool or Fan Runs Constantly Thermostat Setting & Thermostat Thermometer Disagree Furnace (Air Conditioner) Cycles Too Fast or Too Slow (narrow or wide temperature swing) Forgot Keypad Lockout Code 1. Blown fuse or tripped circuit breaker. 2. Furnace power switch to OFF. 3. Furnace blower compartment door or panel loose or not properly installed. 4. Loose connection to thermostat or system. 1. Pilot light not lit. 2. Furnace Lock-Out Condition. Heat may also be intermittent. 3. Heating system requires service or thermostat requires replacement. 1. Cooling system requires service or thermostat requires replacement. 1. Possible short in wiring. 2. Possible short in thermostat. 3. Possible short in heat/cool/fan system. 4. FAN Switch set to Fan ON. 1. Thermostat thermometer setting requires adjustment. 1. The location of the thermostat and/or the size of the Heating may be infl uencing the cycle rate. Replace fuse or reset breaker. Turn switch to ON. Replace door panel in proper position to engage safety interlock or door switch. Tighten connections. Re-light pilot. Many furnaces have safety devices that shut down when a lock-out condition occurs. If the heat works intermittently contact the furnace manufacturer or local HVAC service person for assistance. Diagnostic: Set to HEAT and raise the setpoint above room temperature. Within a few seconds the thermostat should make a soft click sound. This sound usually indicates the thermostat is operating properly. If the thermostat does not click, try the reset operation listed above. If the thermostat does not click after being reset contact your heating and cooling service person or place of purchase for a replacement. If the thermostat clicks, contact the furnace manufacturer or a HVAC service person to verify the heating is operating correctly. Same as diagnostic for No Heat condition except set the thermostat to COOL and lower the setpoint below the room temperature. There may be up to a fi ve minute delay before the thermostat clicks in Cooling. Check each wire connection to verify they are not shorted or touching together. No bare wire should stick out from under terminal block. Try resetting the thermostat as described above. If the condition persists the manufacturer of your system or service person can instruct you on how to test the Heat/Cool system for correct operation. If the system operates correctly, replace the thermostat. The thermometer can be adjusted +/- 4 degrees. See Temperature Display Adjustment in the Confi guration Menu section. Digital thermostats provide precise control and cycle faster than older mechanical models. The system turns on and off more frequently but runs for a shorter time so there is no increase in energy use. If you would like an increased cycle time, choose SL for slow cycle in the Confi guration menu reference, steps 4 through 6. If an acceptable cycle rate is not achieved, contact a local HVAC service person for additional suggestions. Press the menu button (button will disappear) and hold in for 20 seconds. This unlocks the thermostat. HOMEOWNER HELP LINE: White-Rodgers is a division of Emerson Electric Co. The Emerson logo is a trademark and service mark of Emerson Electric Co.

(-)HC-TST213UNMS 5/1/1 Day 5/2 Day Non-Programmable. Yes

(-)HC-TST213UNMS 5/1/1 Day 5/2 Day Non-Programmable. Yes Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. Universal Thermostat

More information

Emerson Blue Easy Set 1H/1C

Emerson Blue Easy Set 1H/1C Emerson Blue Easy Set 1H/1C Model: 1F86EZ-0251 Non-Programmable Thermostat with 3 Temperature Pre-Sets Home, Sleep and Away Installation Instructions and User Guide Message to Homeowner Congratulations

More information

2 THERMOSTAT DETAILS 3 REMOVING OLD THERMOSTAT

2 THERMOSTAT DETAILS 3 REMOVING OLD THERMOSTAT CONTENTS Installation Instructions for Heating & Air Conditioning 1F79 n-programmable Heat Pump Thermostat Preparations... 1 Thermostat Details... 1 Removing Old Thermostat... 1-2 Mounting and Wiring...

More information

1F98EZ-1421, Easy Install

1F98EZ-1421, Easy Install 1F98EZ-1421, -1441 Easy Install For up to 4 Stages and 2 Stages Cool INSTALLATION INSTRUCTIONS APPLICATIONS Configuration Options Single Stage Multi Stage Pump Pump with Dual Fuel FAILURE TO READ AND FOLLOW

More information

1F Non-programmable Electronic Digital Heat Pump Thermostat INSTALLATION AND OPERATION INSTRUCTIONS

1F Non-programmable Electronic Digital Heat Pump Thermostat INSTALLATION AND OPERATION INSTRUCTIONS FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. DESCRIPTION Your new White-Rodgers Digital Thermostat

More information

1F Non-Programmable 5/1/1 Day 7 Day

1F Non-Programmable 5/1/1 Day 7 Day Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. APPLICATIONS

More information

1F Non-Programmable Electronic Digital Multi-Stage Thermostat INSTALLATION AND OPERATION INSTRUCTIONS

1F Non-Programmable Electronic Digital Multi-Stage Thermostat INSTALLATION AND OPERATION INSTRUCTIONS 1F83-261 Non-Programmable Electronic Digital Multi-Stage Thermostat INSTALLATION AND OPERATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS

More information

1F80ST /2 Day 5/1/1 Day Non-Programmable 1F86ST-0471

1F80ST /2 Day 5/1/1 Day Non-Programmable 1F86ST-0471 Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. 80 Series Thermostat

More information

IF79 CAUTION CONTENTS YOUR THERMOSTAT REPLACES 1 PREPARATIONS. Installation Instructions for. Heating & Air Conditioning

IF79 CAUTION CONTENTS YOUR THERMOSTAT REPLACES 1 PREPARATIONS. Installation Instructions for. Heating & Air Conditioning CONTENTS Installation Instructions for Heating & Air Conditioning IF79 n- Programmable Heat Pump Thermostat Preparations... 1 Thermostat Details... 1 Removing Old Thermostat... 1-2 Mounting and Wiring...

More information

1F Day 5/1/1 Day Non-Programmable. W/ Economizer Max. Stage Heat/Cool 1/1 1/2 2/2 2/3 3/1 3/2 4/2 4/3

1F Day 5/1/1 Day Non-Programmable. W/ Economizer Max. Stage Heat/Cool 1/1 1/2 2/2 2/3 3/1 3/2 4/2 4/3 Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. APPLICATIONS

More information

Emerson Inspire 1HDEZ Installation Instructions. Thermostat/Interface Equipment Control TROUBLESHOOTING

Emerson Inspire 1HDEZ Installation Instructions. Thermostat/Interface Equipment Control TROUBLESHOOTING Emerson Inspire 1HDEZ-1521 Installation Instructions Thermostat/Interface Equipment Control TROUBLESHOOTING FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL

More information

2 THERMOSTAT DETAILS 3 REMOVING OLD THERMOSTAT

2 THERMOSTAT DETAILS 3 REMOVING OLD THERMOSTAT CONTENTS Installation Instructions for Heating & Air Conditioning 1F72 5/2 Day Programmable Heat Pump Thermostat Preparations... 1 Thermostat Details... 1 Removing Old Thermostat... 1-2 Mounting and Wiring...

More information

1F Day 5/1/1 Day Non-Programmable. W/ Economizer Max. Stage Heat/Cool 1/1 1/2 2/2 2/3 3/1 3/2 4/2 4/3

1F Day 5/1/1 Day Non-Programmable. W/ Economizer Max. Stage Heat/Cool 1/1 1/2 2/2 2/3 3/1 3/2 4/2 4/3 Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. APPLICATIONS

More information

1F Day 5/1/1 Day Non-Programmable

1F Day 5/1/1 Day Non-Programmable Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. Single, Multi-,

More information

1F Day 5/1/1 Day Non-Programmable. W/ Economizer Max. Stage Heat/Cool 1/1 1/2 2/2 2/3 3/1 3/2 4/2 4/3

1F Day 5/1/1 Day Non-Programmable. W/ Economizer Max. Stage Heat/Cool 1/1 1/2 2/2 2/3 3/1 3/2 4/2 4/3 Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. APPLICATIONS

More information

1F Day Day Non-Programmable. Maximum Stages Heat/Cool

1F Day Day Non-Programmable. Maximum Stages Heat/Cool Blue Universal Touchscreen Thermostat with Automatic Heat/Cool Changeover Option Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING

More information

Operator: SaVe these instructions forfuture use

Operator: SaVe these instructions forfuture use Whiter Rodgers 1F86-344 Non-Programmable Electronic Digital Thermostat INSTALLATION AND OPERATION INSTRUCTIONS Operator: SaVe these instructions forfuture use FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS

More information

1F Day 5/1/1 Day Non-Programmable. Maximum Stages Heat/Cool 1/1 2/2 3/1 4/2

1F Day 5/1/1 Day Non-Programmable. Maximum Stages Heat/Cool 1/1 2/2 3/1 4/2 Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. APPLICATIONS

More information

Operator: Save these instructions for future use

Operator: Save these instructions for future use WHITE-RODGERS 1F89-211 Non-programmable Electronic Digital Heat Pump Thermostat INSTALLATION AND OPERATION INSTRUCTIONS Operator: Save these instructions for future use FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS

More information

ATP21W02 CONTENTS YOUR THERMOSTAT REPLACES 1 PREPARATIONS REMOVING OLD THERMOSTAT 2 THERMOSTAT DETAILS

ATP21W02 CONTENTS YOUR THERMOSTAT REPLACES 1 PREPARATIONS REMOVING OLD THERMOSTAT 2 THERMOSTAT DETAILS CONTENTS Installation Instructions for 97B0082N07 Heating & Air Conditioning 5/2 Day Programmable Heat Pump Thermostat Preparations...1 Thermostat Details...1 Removing Old Thermostat... 1-2 Mounting and

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! 1F85-277 ing & Air Conditioning 7 Day/5-1-1 Programmable/Non-programmable, Auto Changeover, Multi-Stage/ Pump Thermostat INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE

More information

THERMOSTATS 126. MECHANICAL THERMOSTATS 1C20 / 1C21 / 1C26 / 1E30 / 1E56 / 1F56... Wiring Diagrams / Configuration

THERMOSTATS 126. MECHANICAL THERMOSTATS 1C20 / 1C21 / 1C26 / 1E30 / 1E56 / 1F56... Wiring Diagrams / Configuration INDEX THERMOSTATS 126 l (s) Description Page(s) EMERSON BI BLUE 12" TOUCHSCREEN 1F97-1277... Wiring Diagrams / Configuration... 126 131 1F95-1280 / 1F95-1291... Wiring Diagrams / Configuration... 128 131

More information

1F Day Day Non-Programmable. Maximum Stages Heat/Cool

1F Day Day Non-Programmable. Maximum Stages Heat/Cool Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. Blue Humidity

More information

Installation and Operating Instructions for Hum/Dehum Modulating Touchscreen Thermostat APPLICATIONS SPECIFICATIONS CAUTION

Installation and Operating Instructions for Hum/Dehum Modulating Touchscreen Thermostat APPLICATIONS SPECIFICATIONS CAUTION Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. Installation

More information

1F Day Day Non-Programmable. Maximum Stages Heat/Cool

1F Day Day Non-Programmable. Maximum Stages Heat/Cool Blue Humidity Touchscreen Universal Thermostat with Humidity/Dehumidity Control and Automatic Heat/Cool Changeover Option Single Stage, Multi-Stage, Heat Pump Save these instructions for future use! Installation

More information

Smart Temp. Model

Smart Temp. Model Smart Temp Model 42-160 SINGLE STAGE PROGRAMMABLE THERMOSTAT 1 Heat / 1 Cool Single Stage Thermostat. 5+2 Programmable, Compatible with Gas Heat & Heat Pump System Installation and Operation Manual SPECIFICATIONS:--------------------------------------------------------------------------------

More information

P200 Programmable Thermostat Installation Instructions & User Guide. For Installation Help. White-Rodgers.com

P200 Programmable Thermostat Installation Instructions & User Guide. For Installation Help. White-Rodgers.com P200 Programmable Thermostat Installation Instructions & User Guide For Installation Help 1-877-654-9394 White-Rodgers.com 2011 Printed in China White-Rodgers 8100 West Florissant Avenue St. Louis, MO

More information

PRO Installation. Thermostat Wi-Fi

PRO Installation. Thermostat Wi-Fi PRO Installation Thermostat Wi-Fi 1 Designed by the pros for the pros There are a lot of choices when it comes to buying a thermostat, but only one combines 125 years of experience and the latest connected

More information

QUICK INSTALLATION GUIDE

QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE Read Installer Notes before removing cover from Thermostat. 1F85RF-275 Wireless Remote Kit INSTALLER NOTES IMPORTANT Do not remove battery tags to activate the thermostat or wireless

More information

PRO Installation. Touch Wi-Fi Thermostat

PRO Installation. Touch Wi-Fi Thermostat PRO Installation Touch Wi-Fi Thermostat 1 Designed by the pros for the pros There are a lot of choices when it comes to buying a thermostat, but only one combines 125 years of experience and the latest

More information

1 PREPARATIONS 2 THERMOSTAT DETAILS 3 REMOVING OLD THERMOSTAT. 1E78 Non-Programmable Thermostat CONTENTS

1 PREPARATIONS 2 THERMOSTAT DETAILS 3 REMOVING OLD THERMOSTAT. 1E78 Non-Programmable Thermostat CONTENTS CNTENTS Installation Instructions for Heating & Air Conditioning 1E78 Non-Programmable Thermostat Preparations... 1 Thermostat Details... 1 Removing ld Thermostat... 1 Mounting and iring... 2 Check Thermostat

More information

PRO Installation. Touch Wi-Fi Thermostat

PRO Installation. Touch Wi-Fi Thermostat PRO Installation Touch Wi-Fi Thermostat 1 Designed by the pros for the pros There are a lot of choices when it comes to buying a thermostat, but only one combines 125 years of experience and the latest

More information

REMOVING OLD THERMOSTAT DETAILS. Model No CONTENTS YOUR THERMOSTAT REPLACES 0 PREPARATIONS. 5/2 Day Programmable Thermostat

REMOVING OLD THERMOSTAT DETAILS. Model No CONTENTS YOUR THERMOSTAT REPLACES 0 PREPARATIONS. 5/2 Day Programmable Thermostat CONTENTS Installation Instructions for Heating & Air Conditioning Model. 47445 5/2 Day Programmable Thermostat Preparations...... 1 Thermostat Details... 1 Removing Old Thermostat... ~. 1 Mounting and

More information

1F Non-Programmable Electronic Digital Thermostat INSTALLATION AND OPERATION INSTRUCTIONS

1F Non-Programmable Electronic Digital Thermostat INSTALLATION AND OPERATION INSTRUCTIONS FAILURE T READ AND FLL ALL INSTRUCTINS CAREFULL EFRE INSTALLIN R PERATIN THIS CNTRL CULD CAUSE PERSNAL INJUR AND/R PRPERT DAMAE. DESCRIPTIN our new hite-rodgers Digital Thermostat uses the technology of

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! WHITE-RODGERS 1F83-51 Non-Programmable Electronic Digital Multi-Stage Thermostat INSTALLATION AND OPERATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL

More information

IF78 CAUTION CONTENTS YOUR THERMOSTAT REPLACES PREPARATIONS. Installation Instructions for. Heating & Air Conditioning. Non-Programmable Thermostat

IF78 CAUTION CONTENTS YOUR THERMOSTAT REPLACES PREPARATIONS. Installation Instructions for. Heating & Air Conditioning. Non-Programmable Thermostat CNTENTS Installation Instructions for Heating & Air Conditioning IF78 n-programmable Thermostat Preparations... 1 Thermostat Details... 1 Removing ld Thermostat... 1 Mounting and iring... 2 Check Thermostat

More information

NP100 Non-Programmable Thermostat Installation Instructions & User Guide. For Installation Help. White-Rodgers.com

NP100 Non-Programmable Thermostat Installation Instructions & User Guide. For Installation Help. White-Rodgers.com NP100 Non-Programmable Thermostat Installation Instructions & User Guide For Installation Help 1-877-654-9394 White-Rodgers.com 2011 Printed in hina White-Rodgers 8100 West Florissant Avenue St. Louis,

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! WHITE-RODGERS 1F81-51 Programmable Electronic Digital Multi-stage Thermostat INSTALLATION AND OPERATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS

More information

Operator: Save these instructions for future use!

Operator: Save these instructions for future use! WHITE-RODGERS 1F82-51 Programmable Electronic Digital Heat Pump Thermostat INSTALLATION AND OPERATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS

More information

EMERSON BLUE Wireless Comfor t Inter face 1F98EZ-1621 HOMEOWNER USER GUIDE

EMERSON BLUE Wireless Comfor t Inter face 1F98EZ-1621 HOMEOWNER USER GUIDE EMERSON BLUE Wireless Comfor t Inter face 1F98EZ-1621 HOMEOWNER USER GUIDE Emerson Blue Wireless Comfort Interface - Homeowner User Guide Message to Homeowners Congratulations on choosing the Emerson Blue

More information

Safety & Installation Instructions

Safety & Installation Instructions Model 8476 Thermostat with Event-Based Air Cleaning Safety & Installation Instructions READ AND SAVE THESE INSTRUCTIONS Table of contents Installation Installation location recommendations... 3 Outdoor

More information

Safety & Installation Instructions

Safety & Installation Instructions 8400 Series Thermostats Safety & Installation Instructions READ AND SAVE THESE INSTRUCTIONS 61000652C 8400 Tstat Install.indd 1 10/13/09 11:08:56 AM Table of contents Installation Installation location

More information

(Operator: SaVe these instructions forfuture use

(Operator: SaVe these instructions forfuture use @WHITE-RODGERS 1F81-261 Programmable Electronic Digital Multi-stage Thermostat INSTALLATION AND OPERATION INSTRUCTIONS (Operator: SaVe these instructions forfuture use FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS

More information

Safety & Installation Instructions

Safety & Installation Instructions Model 8800 Universal Communicating Thermostat Safety & Installation Instructions READ AND SAVE THESE INSTRUCTIONS Table of contents Installation Installation location recommendations... 2 Thermostat mounting...

More information

Peak Partners Web-Programmable Thermostat Homeowner s Manual. Look inside for a complete guide to the setup and operation of your new thermostat.

Peak Partners Web-Programmable Thermostat Homeowner s Manual. Look inside for a complete guide to the setup and operation of your new thermostat. Peak Partners Web-Programmable Thermostat Homeowner s Manual Look inside for a complete guide to the setup and operation of your new thermostat. Table of Contents Step 1: Getting Started...4-6 A. Thermostat

More information

T-32-TS Touchscreen Thermostat. Installation Manual

T-32-TS Touchscreen Thermostat. Installation Manual T-32-TS Touchscreen Thermostat Installation Manual TABLE OF CONTENTS Introduction...4 Getting Started...5 Installing the Thermostat...6, 8 Disassembly...6 Thermostat Location...6 Mounting the Subbase...6,

More information

SAS6000UTK-7 UNIVERSAL THERMOSTAT

SAS6000UTK-7 UNIVERSAL THERMOSTAT SAS6000UTK-7 UNIVERSAL THERMOSTAT Used with Single Stage, Multi-Stage, Heat pump Installation and operation instructions SPECIFICATION: Power Supply Dual Power 24VAC (18-30VAC,50/60Hz) or Battery Powered

More information

FAILURE TO READ AND FOLLOWALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURYAND/OR PROPERTY DAMAGE.

FAILURE TO READ AND FOLLOWALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURYAND/OR PROPERTY DAMAGE. @WHITE-RODGERS 1F85-277 Heating & Air Conditioning 7 Day/5-1-1 Programmable/Non-programmable, Auto Changeover, Multi-Stage/Heat Pump Thermostat INSTALLATION INSTRUCTIONS FAILURE TO READ AND FOLLOWALL INSTRUCTIONS

More information

INSTALLATION MANUAL. Need Help? This manual covers the following models: T755. Power Type. Thermostat Applications Guide. Page.

INSTALLATION MANUAL. Need Help? This manual covers the following models: T755. Power Type. Thermostat Applications Guide. Page. INSTALLATION MANUAL This manual covers the following models: T755 Thermostat Applications Guide Description Gas or Oil Heat Electric Furnace Heat Pump (No Aux. or Emergency Heat) Heat Pump (with Aux. or

More information

Safety & Installation Instructions

Safety & Installation Instructions 8400 Series Thermostats Safety & Installation Instructions READ AND SAVE THESE INSTRUCTIONS 61000652A 8400 Tstat Install.indd 1 7/23/09 2:20:45 PM Table of contents Installation Installation location recommendations...

More information

IT801 Thermostat. User s Manual. The complete guide to the set up and operation of your new smart Wi-Fi thermostat.

IT801 Thermostat. User s Manual. The complete guide to the set up and operation of your new smart Wi-Fi thermostat. IT801 Thermostat User s Manual The complete guide to the set up and operation of your new smart Wi-Fi thermostat. The smart Wi-Fi thermostat system learns your comfort preferences, then finds opportunities

More information

1F Programmable Electronic Digital Thermostat INSTALLATION AND OPERATION INSTRUCTIONS

1F Programmable Electronic Digital Thermostat INSTALLATION AND OPERATION INSTRUCTIONS 1F80-224 Programmable Electronic Digital Thermostat INSTALLATIN AND PERATIN INSTRUCTINS perator: Save these instructions for future use! FAILURE T READ AND FLL ALL INSTRUCTINS CAREFULL EFRE INSTALLIN R

More information

WHITE-RODGERS COMFORT-SET 90 SERIES

WHITE-RODGERS COMFORT-SET 90 SERIES INSTALLATI DESCRIPTI WHITE-RODGERS COMFORT-SET 90 SERIES MULTI-STAGE/HEAT PUMP INSTALLATI/CFIGURATI This White-Rodgers Automatic Setback Digital Thermostat uses microcomputer technology to provide precise

More information

1F Programmable Electronic Digital Thermostat INSTALLATION AND OPERATION INSTRUCTIONS

1F Programmable Electronic Digital Thermostat INSTALLATION AND OPERATION INSTRUCTIONS 1F80-361 Programmable Electronic Digital Thermostat INSTALLATIN AND PERATIN INSTRUCTINS perator: Save these instructions for future use! FAILURE T READ AND FLL ALL INSTRUCTINS CAREFULL EFRE INSTALLIN R

More information

INSTALLATION MANUAL. * If using remote sensors the thermostat must be hardwired. Need Help?

INSTALLATION MANUAL. * If using remote sensors the thermostat must be hardwired. Need Help? INSTALLATION MANUAL This manual covers the following models: T955W Master Thermostat Base Module Thermostat Applications Guide Description Gas or Oil Heat Electric Furnace Heat Pump (No Aux. or Emergency

More information

Commercial Touchscreen Thermostat

Commercial Touchscreen Thermostat 55,13M 1/27 Supersedes 12/25 Commercial Touchscreen Thermostat 25 Lennox Industries, Inc. Dallas, Texas, USA APPLICATION Page 1 INSTALLATION INSTRUCTIONS The Lennox Commercial Touchscreen Thermostat provides

More information

Installation Instructions

Installation Instructions T2 -PAC01 -A, T2 -NAC01 -A T2 -PHP01 -A, T2 -NHP01 -A LEGACYt SERIES THERMOSTATS Installation Instructions A07047 Legacy Series Programmable Thermostat A07046 Legacy Series Non-Programmable Thermostat

More information

PS4000 and PS5000 Touchscreen Programmable Thermostat Installation and Owners Manual Robertshaw 01/

PS4000 and PS5000 Touchscreen Programmable Thermostat Installation and Owners Manual Robertshaw 01/ PS4000 and PS5000 Touchscreen Programmable Thermostat Installation and Owners Manual www.robertshaw.com 2016 Robertshaw 01/16 352-00244-001 IMPORTANT SAFETY INFORMATION WARNING: ELECTRICAL SHOCK HAZARD

More information

SAS6000UTK-7-WIFI OPERATING INSTRUCTION

SAS6000UTK-7-WIFI OPERATING INSTRUCTION SAS6000UTK-7-WIFI OPERATING INSTRUCTION 1 This manual apply for SAS6000UTK-7-WIFI,used with Single Stage,Multi-Stage,Heat pump and has mobile control function. SPECIFICATION Power Supply Dual Power 24VAC

More information

INSTALLATION MANUAL. This manual covers TopTech models: TT-N-851. Need Help? Power Type. Thermostat Applications Guide. Page.

INSTALLATION MANUAL. This manual covers TopTech models: TT-N-851. Need Help? Power Type. Thermostat Applications Guide. Page. INSTALLATION MANUAL This manual covers TopTech models: TT-N-851 Thermostat Applications Guide Description Gas or Oil Heat Electric Furnace Heat Pump (No Aux. or Emergency Heat) Heat Pump (with Aux. or

More information

INSTALLATION MANUAL. Need Help? This manual covers the following models: T725. Power Type. Thermostat Applications Guide. Page.

INSTALLATION MANUAL. Need Help? This manual covers the following models: T725. Power Type. Thermostat Applications Guide. Page. INSTALLATION MANUAL This manual covers the following models: T725 Thermostat Applications Guide Des cription Gas or Oil Heat Electric Furnace Heat Pump ( Aux. or Emergency Heat) Heat Pump (with Aux. or

More information

INSTALLATION MANUAL. This manual covers TopTech models: TT-S-755H. Need Help? Thermostat Applications Guide. Power Type. Table of Contents.

INSTALLATION MANUAL. This manual covers TopTech models: TT-S-755H. Need Help? Thermostat Applications Guide. Power Type. Table of Contents. INSTALLATION MANUAL This manual covers TopTech models: TT-S-755H Thermostat Applications Guide Description Gas or Oil Heat Electric Furnace Heat Pump (No Aux. or Emergency Heat) Heat Pump (with Aux. or

More information

Comfort System T-21-P Touchscreen Thermostat Installation Manual

Comfort System T-21-P Touchscreen Thermostat Installation Manual Comfort System T-21-P Touchscreen Thermostat Installation Manual Version 1.40 INTRODUCTION The Comfort System T-21-P is a feature-rich touchscreen thermostat that can be battery powered or hardwired to

More information

Smart Temp. ApolloP/n Installation Manual. Version 1.0

Smart Temp. ApolloP/n Installation Manual. Version 1.0 Smart Temp ApolloP/n 44-800 Installation Manual Version 1.0 TABLE OF CONTENTS Introduction...6 Getting started...7 Installing the thermostat...8 Disassembly...8 Thermostat location...8 Mounting the subbase...8,

More information

7-DAY or 5/2-DAY PROGRAMMABLE, OR NON-PROGRAMMABLE THERMOSTAT INSTALLATION AND OPERATING INSTRUCTIONS

7-DAY or 5/2-DAY PROGRAMMABLE, OR NON-PROGRAMMABLE THERMOSTAT INSTALLATION AND OPERATING INSTRUCTIONS TX100E 7-DAY or 5/2-DAY PROGRAMMABLE, OR NON-PROGRAMMABLE THERMOSTAT INSTALLATION AND OPERATING INSTRUCTIONS 52203 IMPORTANT! Please read all of these instructions carefully before beginning installation.

More information

For Quick Set-Up go to Page 14

For Quick Set-Up go to Page 14 Talking Thermostat Model VT3000 Guide SmartWay Solutions, Inc. US Patent 6,608,560 & 7,62,253 For Quick Set-Up go to Page 4 Model VT3000, a universal thermostat for use on most Gas or Electric, Conventional

More information

INSTALLATION MANUAL. Need Help? This manual covers TopTech models: TT-N-721 and T721. Power Type. Thermostat Applications Guide.

INSTALLATION MANUAL. Need Help? This manual covers TopTech models: TT-N-721 and T721. Power Type. Thermostat Applications Guide. INSTALLATION MANUAL This manual covers TopTech models: TT-N-721 and T721 Thermostat Applications Guide Description Gas or Oil Heat Electric Furnace Heat Pump ( Aux. or Emergency Heat) Heat Pump (with Aux.

More information

User s Manual ELITE PROGRAMMABLE THERMOSTAT WITH MENU DRIVEN DISPLAY

User s Manual ELITE PROGRAMMABLE THERMOSTAT WITH MENU DRIVEN DISPLAY User s Manual ELITE PROGRAMMABLE THERMOSTAT WITH MENU DRIVEN DISPLAY Customizable programming options for every day, weekdays, weekends, or individual days. Smart recovery gradually adjusts indoor temperatures

More information

WARNING Important Safety Information

WARNING Important Safety Information Premier Series Programmable Thermostats MODEL 5000 1 2 3 Specifications Installation Testing Your New Thermostat Programming User Settings WARNING Important Safety Information Additional Operation Features

More information

Model number is located on back of thermostat.

Model number is located on back of thermostat. Installer Manual Programmable Thermostats PREMIER SERIES 5020 Single Stage Conventional Systems or Single Stage Heat Pumps with Auxiliary Heat 5220 Up to 3 Heat / 2 Cool Heat Pump Up to 2 Heat / 2 Cool

More information

ONX908MTW-0/24V MULTI STAGE THERMOSTAT

ONX908MTW-0/24V MULTI STAGE THERMOSTAT ONX908MTW-0/24V MULTI STAGE THERMOSTAT Application: 24VAC,2Heat/2cool Installation and operation instructions SPECIFICATION: Electrical Rating 24VAC Terminal Load 3.0 A per terminal (terminal Y1, W1, G:

More information

1F Programmable Electronic Digital Thermostat INSTALLATION AND OPERATION INSTRUCTIONS

1F Programmable Electronic Digital Thermostat INSTALLATION AND OPERATION INSTRUCTIONS FAILURE T READ AND FLL ALL INSTRUCTINS CAREFULL EFRE INSTALLIN R PERATIN THIS CNTRL CULD CAUSE PERSNAL INJUR AND/R PRPERT DAMAE. DESCRIPTIN our new hite-rodgers 7-Day Digital Thermostat uses the technology

More information

YOUR THERMOSTAT REPLACES PREPARATIONS

YOUR THERMOSTAT REPLACES PREPARATIONS CNTENTS Installation Instructions for Heating & Air Conditioning 1E78 5/2 Day Programmable Thermostat Preparations... 1 Thermostat Details... 1 Removing ld Thermostat... 1 Mounting and iring... 2 Check

More information

Detailed Installer Guide

Detailed Installer Guide Detailed Installer Guide Programmable Thermostats PREMIER SERIES 5020 Single Stage Heat / Cool Conventional or Heat Pump 5220 Up to 3 Heat / 2 Cool Heat Pump Up to 2 Heat / 2 Cool Conventional 1 Specifications

More information

Installer Guide. WARNING Important Safety Information. 1 Specifications

Installer Guide. WARNING Important Safety Information. 1 Specifications 1 Specifications cont. Premier Series Universal Auto Changeover Up to 3 Heat / 2 Cool Conventional and Heat Pump Thermostat Installer Guide Before Installing, Programming or Operating, PLEASE READ ALL

More information

Installer Guide. WARNING Important Safety Information. 1 Specifications

Installer Guide. WARNING Important Safety Information. 1 Specifications 1 Specifications cont. Premier Series Universal Auto Changeover Up to 3 Heat / 2 Cool Heat Pump or 2 Heat / 2 Cool Conventional Thermostat Installer Guide Before Installing, Programming or Operating, PLEASE

More information

User s Manual

User s Manual 997-060180-4e User s Manual 8403-060 Menu Driven Display 1120-445 I. CONTROLLER OPERATION ADJUSTING TEMPERATURE (Temporary Override when in Programmable mode) 1. Before you can adjust the temperature,

More information

Parts Diagram. Up button. Down button. Right (fan) button. Left (system) button. RC/RH Jumper. Field programming pins

Parts Diagram. Up button. Down button. Right (fan) button. Left (system) button. RC/RH Jumper. Field programming pins Table of Contents Parts Diagram........................................................... 1 Icon Descriptions......................................................... 2 Specifications...........................................................

More information

CONTROLS THERMOSTATS Bulletin No November 2001 Supersedes September 2001 INNOVATOR PROGRAMMABLE THERMOSTATS ENGINEERING DATA

CONTROLS THERMOSTATS Bulletin No November 2001 Supersedes September 2001 INNOVATOR PROGRAMMABLE THERMOSTATS ENGINEERING DATA ENGINEERING DATA CONTROLS THERMOSTATS Bulletin No. 210125 November 2001 Supersedes September 2001 INNOVATOR PROGRAMMABLE THERMOSTATS L21 SERIES THERMOSTATS HEAT/COOL SYSTEMS Features (All Models): Extra

More information

WARNING Important Safety Information

WARNING Important Safety Information 1 Specifications Premier Series Non-Programmable Thermostats MODEL 3000 MODEL 3200 1 2 3 4 Specifications Installation Testing Your New Thermostat Programming User Settings WARNING Important Safety Information

More information

Programmable Touchscreen Thermostats. Disconnect power before beginning installation.

Programmable Touchscreen Thermostats. Disconnect power before beginning installation. Installer Guide Touchscreen Programmable Touchscreen Thermostats 6100 Single Stage Heat / Cool Conventional or Heat Pump 6300 Up to 4 Heat / 2 Cool Heat Pump Up to 3 Heat / 2 Cool Conventional 6400 Up

More information

TXU Energy ithermostat In-Home User Manual. Model: 1F Day Programming

TXU Energy ithermostat In-Home User Manual. Model: 1F Day Programming TXU Energy ithermostat In-Home User Manual Model: 1F88-300 7-Day Programming Copyright November 2009 Data, drawings, and other material contained herein are proprietary to TXU Energy Retail Company LLC

More information

INSTALLATION MANUAL. Need Help? This manual covers the following models: T915. Power Type. Thermostat Applications Guide. Page.

INSTALLATION MANUAL. Need Help? This manual covers the following models: T915. Power Type. Thermostat Applications Guide. Page. INSTALLATION MANUAL This manual covers the following models: T915 Thermostat Applications Guide Des cription Gas or Oil Heat Electric Furnace Heat Pump (No Aux. or Emergency Heat) Heat Pump (with Aux.

More information

Indicates incorrect room temperature. No second stage or AUX heating. Emergency heat does not turn on

Indicates incorrect room temperature. No second stage or AUX heating. Emergency heat does not turn on Troubleshooting Poor Temperature Regulation This page lists problems that may affect the temperature performance of your LUX thermostat with suggested resolutions. For more detailed information please

More information

WHITE-RODGERS 90 SERIES 1F MULTI-STAGE/HEAT PUMP INSTALLATION/CONFIGURATION

WHITE-RODGERS 90 SERIES 1F MULTI-STAGE/HEAT PUMP INSTALLATION/CONFIGURATION INSTALLATION DESCRIPTION WHITE-RODGERS 90 SERIES 1F9-391 MULTI-STAGE/HEAT PUMP INSTALLATION/CONFIGURATION This White-Rodgers Digital Thermostat uses microcomputer technology to provide precise time, humidity,

More information

INTRODUCTION Thank you for purchasing your new Comfort-Set 90 Series thermostat. Your new White-Rodgers Thermostat uses solid state microcomputer

INTRODUCTION Thank you for purchasing your new Comfort-Set 90 Series thermostat. Your new White-Rodgers Thermostat uses solid state microcomputer INTRODUCTI Thank you for purchasing your new Comfort-Set 90 Series thermostat. Your new White-Rodgers Thermostat uses solid state microcomputer technology to provide precise time/temperature control. This

More information

Safety & Installation Instructions

Safety & Installation Instructions Premium Programmable Thermostat Safety & Installation Instructions Model 8570 READ AND SAVE THESE INSTRUCTIONS TABLE OF CONTENTS PAGE SPECIFICATIONS............................. 1 WIRE REQUIREMENTS.........................

More information

THERMOSTATS. 100-Series. 200-Series. 300-Series. 400-Series. 500-Series. Model Number Identification UHC TST 101 GE MS

THERMOSTATS. 100-Series. 200-Series. 300-Series. 400-Series. 500-Series. Model Number Identification UHC TST 101 GE MS FORM NO. T22-001 REV. 6 Supersedes Form No. T22-001 Rev. 5 THERMOSTATS 100-Series NON-PROGRAMMABLE UHC-TST101GESS UHC-TST102HPMS UHC-TST103UNMS 200-Series PROGRAMMABLE UHC-TST201GESS UHC-TST202HPMS UHC-TST203UNMS

More information

WARNING Important Safety Information

WARNING Important Safety Information 1 Specifications Premier Series Non-Programmable Thermostats MODEL 3000 MODEL 3200 1 2 3 4 5 Specifications Installation Testing Your New Thermostat Programming User Settings Temperature Adjustment WARNING

More information

THERMOSTATS 100-Series NON-PROGRAMMABLE UHC-TST101GESS UHC-TST102HPMS UHC-TST103UNMS

THERMOSTATS 100-Series NON-PROGRAMMABLE UHC-TST101GESS UHC-TST102HPMS UHC-TST103UNMS FORM NO. T22-001 REV. 2 Supersedes Form No. T22-001 Rev. 1 THERMOSTATS 100-Series NON-PROGRAMMABLE UHC-TST101GESS UHC-TST102HPMS UHC-TST103UNMS 200-Series PROGRAMMABLE UHC-TST201GESS UHC-TST202HPMS UHC-TST203UNMS

More information

USER MANUAL WARNING! CONTENTS MODEL 1 SPECIFICATIONS READ ALL INSTRUCTIONS BEFORE PROCEEDING 2 INSTALLATION. Premier Series

USER MANUAL WARNING! CONTENTS MODEL 1 SPECIFICATIONS READ ALL INSTRUCTIONS BEFORE PROCEEDING 2 INSTALLATION. Premier Series Premier Series MODEL 5000 USER MANUAL 5-2 Day Programmable Single Stage Heat/Cool Digital Thermostat Compatible with low voltage single stage gas, oil or electric heating or cooling systems, including

More information

Homeowner s Guide / 1

Homeowner s Guide / 1 Overview Options Programming Your Homeowner s / 1 Message to the Homeowners Your premium Comfort Control 2 HD Communicating is designed to give you and your family the indoor comfort you desire. It s easy

More information

EWT-3102/EWT-3103 Touchscreen Programmable Thermostat

EWT-3102/EWT-3103 Touchscreen Programmable Thermostat EWT-3102/EWT-3103 Touchscreen Programmable Thermostat WED Room PM Running As SCHED SYSTEM AUTO HEAT FAN AUTO MORE SCHED HOLD CLOCK SCREEN EWC Controls, Inc. 385 HWY 33, Englishtown, NJ 07726 Ph: 732-446-3110

More information

1F97-51 OPERATION GUIDE WHITE-RODGERS. Operator: Save this booklet for future use! 7-Day Programmable Electronic Digital Thermostat

1F97-51 OPERATION GUIDE WHITE-RODGERS. Operator: Save this booklet for future use! 7-Day Programmable Electronic Digital Thermostat OPERATION GUIDE 1F97-51 7-Day Programmable Electronic Digital Thermostat WHITE-RODGERS Operator: Save this booklet for future use! About Your New Thermostat... Your new White-Rodgers Digital Thermostat

More information

OWNER S MANUAL Venstar Inc. 08/07

OWNER S MANUAL Venstar Inc. 08/07 Digital Thermostat residential THERMOSTAT T1 900 7-DAY MABLE up to 3-heat & 2-cool HEAT COOL HEAT PUMP with HUMIDITY CONTROL Control up to 3 Heat & 2 Cool Stages 3 Configurable Outputs Adjustable 2nd &

More information

WARNING Important Safety Information

WARNING Important Safety Information Premier Series Programmable Thermostats MODEL 5200 1 2 3 4 5 Specifications Installation Programming Installer Settings Testing Your New Thermostat Programming User Settings WARNING Important Safety Information

More information

Installation Instructions

Installation Instructions TB --- PAC01 --- A TB --- PHP01 --- A Base Series Programmable Thermostats Installation Instructions Designed and Assembled in the USA. US patents: US20060165149 A1, USD578026 SI, US6205041 B1 A07107 Base

More information

SC Installation, Operation & Application Guide

SC Installation, Operation & Application Guide SC 5211 2-Stage Heat Pump Auto Changeover Hardwire Programmable Electronic Thermostat 7-Day, 5-2-Day or 5-1-1-Day Programmable Configurable 2-Stage Heat Pump Systems Large Display With Backlight Selectable

More information

Must be installed by a trained, experienced technician

Must be installed by a trained, experienced technician Installation Guide VisionPRO TH8000 Series Touch-screen Programmable Thermostat This manual covers the following models TH8321097: For up to 3 Heat/2 Cool heat pump or up to 2 Heat/2 Cool conventional

More information

PECO. WavePRO Wireless System INSTALLATION GUIDE: T2500 THERMOSTAT AND R2500 RECEIVER. The Peco WavePRO Wireless System

PECO. WavePRO Wireless System INSTALLATION GUIDE: T2500 THERMOSTAT AND R2500 RECEIVER. The Peco WavePRO Wireless System PECO WavePRO Wireless System INSTALLATION GUIDE: T2500 THERMOSTAT AND R2500 RECEIVER Wireless control for up to 3-HEAT/ 2-COOL heat pump and conventional systems (gas,oil,electric). Benefits: Reduced installation

More information