PENDER Vario. PENDER Vario Line. PENDER Profi Line. PENDER Air Curtains. PENDER Airquell. Exhaust Technology.

Transcription

1 PENDER Vario PENDER Vario Line PENDER Profi Line PENDER Air Curtains PENDER Airquell Exhaust Technology

2 Our company Your manufacturer of trend-setting and efficient hall heating systems Your benefit our standard: Acceptance and project planning Free energy cost comparison Planning and consultation Installation and start-up Service and maintenance Everything from one single source Our motto: Proper heating, ventilation and cooling of halls. We offer hall heating systems with a high environmental and economic quality, which are produced in Germany. Our highest priority is customer satisfaction. With PENDER hall heating systems, you All PENDER products are produced and are able to cut operating costs and at installed at the highest level of quality. the same time protect the environment. The individual components installed are For this purpose, systems are developed checked and tested by our experts. according to the customer s requirements and designed in accordance with the Experienced salespeople, project managers, fitters and service technicians will customer s particular circumstances. They meet high requirements to technology assist you in every aspect of planning, and design and to easy handling. consulting and completion of your project. This is more than just one Several thousand systems product. It is a whole installed are proof for package of services, high-quality products from planning, and strong customer satisfaction. production, installation to start-up and regular maintenance

3 Technology Technology is excellent in all cases where it copies nature. This is what PENDER has been doing for more than 30 years. Our model is the sun, radiating heat in the form of long-wave radiation. If the rays hit solid objects, they are converted into thermal energy. Everybody knows that a sunbath on a winter day can be pleasant, despite air temperatures below 0 C. On the basis of this ingenious principle, we provide your hall with heat. How does this work? Like the sun, PENDER radiant heating systems produce long-wave thermal radiation, heating all objects and surfaces directly located in the radiation area. Unlike convection, thermal energy is not transported through the air, but transferred by radiation. Only the objects, walls and floor heated this way release heat to the air in the hall. According to our experience, compared with hot-air heating, PENDER infrared radiators can manage with a room air temperature of 3 C less with the same physical well-being. Heat losses due to ventilation and transmission are reduced. The heating system can be operated more efficiently, protecting the environment and cutting costs. Infrared Long-wave radiation Visible light The radiation spectrum of our Sun Short-wave radiation The sun as model Comfortable heat radiation, no heat accumulation under the hall s roof No dust is stirred up from the floor, no draughts, healthy working environment for your staff Save space while the production area remains untouched Cost effectiveness easy on the environment and on your purse More than 85 % of heat re-circulation - 3 -

4 PENDER Vario Warmly recommended PENDER Vario Mini - Midi - Maxi The PENDER Vario Mini Midi Maxi devices impress with their large range of variants. The system offers a broad range of variations imaginable, allowing us to provide the optimum concept for your hall. Variable performance, form, length and colour Combustion efficiency of more than 92 %, with heat recovery more than 98 % Low energy consumption Single and dual-stage burner design Ideal in halls with a height between 4 and 35 metres Firing with oil or gas possible May be combined with the PENDER Airquell ventilation system Controls as digital building services management system Thanks to the more than 85 % share temperature of only 280 C at the of re-circulation or heat recovery, radiant tube ensures the lowest possible PENDER has been the heating tape, radiant heat efficiency which is providing for a very long service life hard to top. The low surface of the equipment. able to achieve a thermal loads within PENDER Vario Mini PENDER Vario Midi PENDER Vario Maxi Mini, Midi and Maxi mainly vary in terms of performance, length and tube diameter

5 PENDER Vario Increased power To increase power in the same area, flexible PENDER Vario systems with more than two tubes are available. Optionally the system can be delivered with up to 8 tubes. Strong radiation is particularly suitable for high halls with an extremely high heat requirement. Please get in touch with us. Sectional view of a PENDER Vario with 3 and with 4 radiant tubes. Up to 8 tubes are possible. Special designs are our challenge, so a variant adjusted to the building envelope (eaves - ridge - eaves) would be no problem at all. Colour selection PENDER Vario is available in different colour shades. You may individually determine the colour of the heating tape, the heating centre and of the radiant tubes. Easily adjust the Vario system to your corporate Identity or to the design and architecture of the building. Make a statement! Standard decors: Heating centre: blue Tubes: blue, black, red Heating tape: galvanized These colours are available We will be happy to fulfil special colour preferences on request. System overview PENDER Vario Vario Mini Vario Midi Vario Maxi Output Gas 12 to 50 kw 48 to 140 kw 70 to 300 kw Oil 12 to 50 kw 48 to 140 kw 70 to 200 kw Tube diameter 180 mm 250 mm 315 or 355 mm Lengths Twotube system Lengths Singletube system 9 to 30 m 25 to 73 m 30 to 150 m 18 to 48 m 42 to 120 m 60 to 248 m - 5 -

6 PENDER Vario Line Flexible modular construction design PENDER Vario Line PENDER Vario Line is the heating system that adapts perfectly to your hall and takes the heat where it is needed. Vario Line is efficient, energy saving and almost 100 % ecological. Many heating tape forms possible Ring system with a heating tape length between 24 and 120 meters Single and dual-stage burner design 40 millimetre insulation Prefabricated and encapsulated modular construction design Controls as digital building services management system PENDER Vario Line is designed as a prefabricated module with an insulation of 40 millimetre between reflector and external cover profile. This ensures that we heat the space where people are staying, and not the hall ceiling. PENDER Vario Line is available as a singleand as two-tube system, and in many modules and components. A maximum construction length of 120 meters is possible

7 PENDER Vario Line Heating tape forms The modular construction designs allows for the most varied heating tape forms, so that a PENDER Vario Line can be adjusted to each single assembly situation. This does not only look good, but also takes the heat to the right places. Standard decors: Tubes: blue, black, red Heating tape: galvanized We will be happy to fulfil special colour preferences on request. A great variety of components are available, allowing for an individual structure. Single-tube system Two-tube system System overview PENDER Vario Line Output kw Heating tape length m Heating tape type / profile Single-tube system PV-L E E 160 PV-L E E 180 PV-L E E 200 PV-L E E 250 Vario Line Single-tube system PV-L 13 / Z 160 PV-L 17 / Z 160 Two-tube system PV-L 21 / Z 160 PV-L 25 / Z 160 PV-L 29 / Z 180 PV-L 33 / Z 180 PV-L 24 / Z 250 PV-L 35 / Z 250 Vario Line Two-tube system - 7 -

8 PENDER Profi Line The ideal solution for smaller halls PENDER Profi Line The compact PENDER Profi Line direct radiant heating systems are an excellent choice for the heating of zones, partial areas or the entire area of large production and storage buildings as well as tennis and sports halls. Stainless steel reflectors Insulated and prefabricated For oil or gas operation U-shaped and linear radiator Controls as digital building services management system The PENDER Profi Line is a particularly cost-efficient device with a functional design. It is available as part of the»heidel berg«series for oil or gas operation, and as part of the»ladenburg«series for gas operation. The PENDER Profi Line is manufactured according to proved and tested PENDER standards and is delivered pre-assembled. The compact design and the arrangement of the different components of the device allow for a quick and easy installation. This is particularly interesting for the industry, since the heating engineer himself will be able to install the device without any difficulties

9 PENDER Profi Line Insulation as a standard All models of the PENDER Profi Line product series are equipped with insulated reflectors as a standard, in order to minimise convection losses and increase energy efficiency. Due to the prefabricated construction method, a very short installation time is guaranteed. Heat radiator with insulation: The surface temperature of the external housing is below 65 C. System overview Two-tube system Single-tube system PENDER Profi Line LA Ladenburg Output Tube length Length of device kw m m LA Z ,00 3,60 LA Z ,90 5,60 LA E ,00 6,60 LA E ,00 9,60 LA E ,00 12,60 Heat radiator without insulation: The reflector panels reach temperatures above 120 C. The thermal energy is lost upwards. PENDER Profi Line HD Heidelberg Output Tube length Length of device kw m m Two-tube system Single-tube system HD Z ,00 6,60 HD Z ,00 9,60 HD Z ,00 12,60 HD Z ,00 15,60 HD E ,00 9,60 HD E ,00 12,60 HD E ,00 15,60 HD E ,00 18,60-9 -

10 Control Control PENDER heating controls are easy to operate. The reduce energy and operating costs and increase comfort, and the system operator maintains full control of its hall heating system. Control unit R-P1 and R-P2 The digital control unit has been designed for one-stage (R-P1) or two-stage operation (R-P2). It provides all functions of a modern heater control, such as daily, overnight and week program, as well as a manual extension of the operating time. Up to eight PENDER radiant heaters and one or two room temperature sensors may be connected to one control unit in standard operation. Controller R-PB The controller R-PB is a BUS system which is ideally matched to the PENDER radiant heaters. Together with the R-PM 1 and R-PM 2 modules, up to 8 heating zones can be managed economically. Up to six radiant heaters can be connected to each R-PM 1 module for one-stage or R-PM 2 for two two-stage operation. Each module operates as an independent controller and has its own room temperature sensor. Via the central unit, the same operations are possible as with our R-P1/2 controllers. IN addition, it is possible to connect them to the internal ethernet, so that it is possible to control them via PC. Connection to your existing building services management system is achieved with suitable communication modules which are available. PENDER Controller R-PB Central unit Heating zone I BUS line, three-core BUS line, three-core BUS line, three-core 6 x PENDER Radiant heating Connection via Ethernet Heating zone II Example of use for control via the Controller R-PB with three heating zones and PC connection via ethernet. PENDER web controller Heating zone III 4 x PENDER Radiant heating 6 x PENDER Radiant heating

11 PENDER Air Curtains Heat for halls and doors Radiant heat with air curtain technology For halls with large doors where opening of the doors results in heavy draughts, the PENDER air curtain system is recommended, reducing the draughts in the occupied area of doors to a minimum. With the door closed: The heat radiator radiates radiant heat from above, heating up the floor and any objects below. They release the heat to the ambient air. The fan is deactivated. The PENDER air curtain combines two proved technologies, combining the advantages of both systems. The energy saving heat radiator permanently heats the space in the door area, preventing the massive penetration of cold air when the door is opened, by switching on an air flow. With the door open: The fan is switched on, generating an air flow which is directed with a 15 % inclination against the inflowing cold air. While the cold air cannot penetrate, the radiant heat continues to affect the floor and any objects below. Especially when the door is open for longer periods, this avoids high heat loss and reduces energy costs. Compared with conventional air curtains with hot water register, 50 % less power is required to achieve the same thermal input. System overview PENDER air curtain Length Output Dimension D x H Weight Volume Noise m kw mm kg m³/h dba x / x / x / x / 77 Device is included in the heating load 5-stage fan Gas or oil operation Larger dimensions or output on request

12 PENDER Airquell Airquell system Heating, cooling and ventilation in one system The PENDER Airquell system creates optimum indoor air conditions. It does not only supply fresh, unpolluted outside air and controls the temperature of your halls, but also removes production-related pollution such as welding and oil mist fumes or sanding dust from frequently used areas. One system, three functions: heating, cooling Exhaust Fresh air intake Exhaust and ventilation Uniform heat distribution Healthy fresh air Swelling air diffusing towers with low air velocity in the frequently PENDER Vario radiation heating used areas Used air is displaced, not mixed Low electric drive power, low operating costs Separate control swelling air diffuser possible Low energy costs with high air quality and thermal comfort Used air rises Winter The hall is gently warmed up. The frequently used area is supplied with warm fresh air. Summer The frequently used area is supplied with cool, fresh outside air. With additional cooling registers, the fresh air can be further cooled down. The fresh outside air is heated by heat exchange of the heating tape and/or via a heating register. The swelling air temperature and the amount of supplied air can be individually controlled. The fresh air which is 1 to 3 C cooler is supplied to the frequently used area and therefore remains there. The existing polluted air is displaced. The swelling air diffusing towers with their numerous openings enable draughtfree and uniform distribution of the air, resulting in a good air quality in the frequently used area without mixing with the existing and polluted air. The radiant heating takes over the heating function, therefore providing for a comfortable and economic heating of your hall. In order to meet special requirements, the installation of a cooling register allows for switching between cooling and fresh air

13 Exhaust technology Exhaust technology In spite of the high thermal efficiency of our hall heating systems, low amounts of exhaust gasses must be discharged. This is achieved with the help of exhaust systems that can be made available as single or collective exhaust gas treatment plants. For almost every installation situation, PENDER offers a safe exhaust system which complies with the regulations. Depending on the available space, roof or wall bushings will be used. You may chose between an individual exhaust gas treatment system, where for each burner an individual stack is installed, or the collective exhaust gas treatment system, where side is taken in through the stack in a pipein-pipe system, enabling the operation of the exhaust gasses of several burners are discharged through one common stack. heat radiators which is completely independent from the ambient air. This extracts Each exhaust gas treatment system has the option of an integrated air supply. further residual heat from the warm exhaust In this case, combustion air from the out- gasses. The right system for each case of application Roof structure Collective exhaust gas treatment system Three-shell construction: Exhaust gas on the inside, fresh air in the middle, lay of still air (insulation) on the outside Collective exhaust pipe Collective exhaust ventilator Wall structure Exhaust gas system stack The PENDER exhaust gas system is very flexible. Many other variants are possible, depending on the installation situation

14 Globally active Consulting & Service PENDER is present with own representations and agents in many countries around the world. Experienced contact persons will assist customers, interested parties and business partners in their local language. PENDER consultation and service centres worldwide: France Austria Poland Russia Latvia Korea Japan China PENDER is a service oriented brand. Headquarters PENDER Strahlungsheizung GmbH Industriestraße 7 D Ladenburg Germany This is an advantage you should take as a planner or building owner. Please call us if you wish wish to receive detailed technical information or a tailor-made heating Our qualified staff be happy to assist you: Consulting & Planning Production & Installation Start-up planning including economic efficiency calculation and an itemization of the investment costs. Service & After-Sales Service

15 Fax response My project Please provide me with a free offer for the hall indicated below: Company Contact person Street, number Post code, city Contact details Phone Mobile phone address Fax Please complete the form and send it to the following fax number: PENDER-Fax: / You may also get in touch with us by phone or Hall dimensions Length Width Height metres metres metres Sales: / sales@pender.de Roof shape Remarks / Other Service: / service@pender.de

16 PENDER Strahlungsheizung GmbH Industriestraße 7 D Ladenburg Germany sales@pender.de Scan contact details