USER AND MAINTENANCE MANUAL

Size: px

Start display at page:

Download "USER AND MAINTENANCE MANUAL"

Erik Wilkinson
5 years ago
Views:

1 AXIOM TM USER AND MAINTENANCE MANUAL Rev. EC-AX-UM-V1.2 Rev. EC-AX-UM-V1.2 i

2 Table of Contents IMPORTANT NOTICE... 1 FOR THE SUPERVISOR / ADMINISTRATOR... 1 ABOUT EVANS... 2 ABOUT THIS MANUAL... 2 CONTACTING EVANS CLIENT SERVICES... 3 CLIENT SERVICES MANAGER... 3 CHAPTER 1 SAFETY ISSUES FOR SIT-STAND (OPTIONAL)... 4 GENERAL PRECAUTIONS... 4 Electrical / Fire... 5 Environmental and Electronics Unit (if applicable)... 6 Radiant Heater (if applicable)... 6 CHAPTER 2 MAINTENANCE... 7 CLEANING... 7 Laminates Cleaning Procedure... 7 Painted Surfaces Cleaning Procedure... 7 Wood Veneer Cleaning Procedure (If Applicable)... 7 Magnetic lift Column Cleaning Procedure... 8 MAGNETIC LIFT COLUMNS (OPTIONAL)... 9 Starting up... 9 Reset Procedure... 9 DOOR HINGE ADJUSTMENT... 9 Removing and Reinstalling of Hinged Panels... 9 Adjustment... 9 CHAPTER 3 REPLACEMENT PARTS ORDERING PARTS Rev. EC-AX-UM-V1.2 ii

3 Read Me First Important Notice All users should read this manual in its entirety before operating the console. It contains important safety and operating information that must be followed to prevent injury to yourself or others, or damage to the console. Lift Mechanisms (Optional): Caution: If your console has optional sit-stand lift mechanisms, note that these have been specifically designed to lift the specified equipment on the console worksurface. Please note that the system is not designed to lift substantial additional loads such as a person sitting on the worksurface or an additional piece of equipment of considerable weight being placed on the worksurface. These types of loadings could cause the lifting mechanisms to be damaged or to be thrown out of sync. Please consult Evans Consoles if you have a requirement for lifting larger loads than originally specified. For the Supervisor / Administrator As it is the responsibility of the employer to provide a safe working environment for its employees, please ensure all operators have read this manual in its entirety, and understand the safety and operating information herein. Be sure all future users receive this manual and review the safety and operating information. Rev. EC-AX-UM-V1.2 1

4 About Evans At Evans we believe that quality begins with high-grade materials, and grows with superior product engineering, efficient project execution and excellent customer service. Your new console is designed specifically with a 24/7 environment in mind, and has unparalleled attention to craftsmanship, ergonomics, modularity and aesthetics. Consisting of a rigid frame and millwork with durable external panels, your console is built to last. Its flexible design enables you to capitalise on new technology and stay ahead of operational changes, saving both time and money. About This Manual At Evans, we know that communication with our clients is an important aspect of our business success, and our clients satisfaction. Evans believes that no product is truly at the leading edge of technology and quality until our clients have enough information to understand their product and use it efficiently. This manual is provided as part of that effort. This manual addresses product: Safety Maintenance Troubleshooting If you require more information, clarification, or if you have a suggestion, please do not hesitate to contact Evans. We have a dedicated team of professionals waiting to help! Rev. EC-AX-UM-V1.2 2

5 Contacting Evans Client Services Phone: (Toll free) Fax: Fax: (403) (Attn: Client Services) Web: Mailing Address: Evans Consoles Corporation th Ave NE Calgary Alberta Canada T2E 8W4 Client Services Manager Gail Linton Direct Line: (403) Rev. EC-AX-UM-V1.2 3

Chapter 1 Safety Issues for Sit-Stand Feature (Optional) General Precautions for Consoles with Lift Mechanisms This product may have moving parts and

Pinch points and other safety hazards have been designed out of the product as much as feasible; however, they cannot be entirely eliminated.

6 Chapter 1 Safety Issues for Sit-Stand Feature (Optional) General Precautions for Consoles with Lift Mechanisms This product may have moving parts and contain electrical and heating equipment (Optional). If there is a Power Outage in your facility the Magnetic Lift Columns MUST BE RESET. Pinch points and other safety hazards have been designed out of the product as much as feasible; however, they cannot be entirely eliminated. To avoid injury or damage, it is IMPORTANT to understand and heed the safety information in this, and other sections of this manual. Optional Lift Columns Rev. EC-AX-UM-V1.2 4

7 Electrical / Fire The following general precautions apply to the console and must be observed by the operator: Do not place objects or position body parts between the worksurface and the top of the base cabinets. DAMAGE OR INJURY COULD RESULT WHEN THE WORKSURFACE IS LOWERED. Do not disable safety features, such as height adjustment, limit switches, etc. BYPASSING SUCH FEATURES OR GUARDS COULD RESULT IN INJURY OR DAMAGE TO EQUIPMENT. The rear panels may be opened with the console in any position. To prevent injury, disconnect power to the console when working inside the cabinet. If height adjustment is necessary (with panels open), turn on power momentarily and keep hands and feet clear of all moving parts and electrical connections. The height and monitor adjustment features are designed for safe operation. To avoid injury the operator should ensure everyone remains clear of the moving worksurface. The console is designed to support expected loads. To prevent overloading, which could cause damage to the unit, or even result in injury; Do not sit on the worksurface at any time Do not place or drop heavy objects onto the worksurface, drawers, or processor shelves. Do not move or lift the desk by the worksurface, as this will cause damage to the lift mechanisms. To avoid injury or damage from electrical hazards: Do not perform electrical work on the console without the proper training and qualifications. Do not perform electrical work, without first disconnecting the electrical power source. Use this console on 120 V ac (North America) power only. Do not operate the controls when standing in water. Do not operate the console if gasoline, paint or other flammable materials are stored or used nearby. Rev. EC-AX-UM-V1.2 5

8 Be careful when grouping units on electrical circuits not to overload the wiring and cabling. Ensure that the power supply is regulated. An unstable power supply can affect the operation of the magnetic lift columns. (Use of UPS system is recommended) Environmental and Electronics Unit (if applicable) Observe the following additional precautions: Do not operate the fan if the filters are not installed and the filter door is not in place. THE FILTERS REDUCE THE POTENTIAL FOR CONTACT WITH THE ROTATING FAN (if applicable). Use individual cables. Connecting multiple personal environment units on a single data wire to a single external controller may result in ground loops and signal degradation. This could detrimentally affect the operation of the data connections. Radiant Heater (if applicable) A knee-space heater may be provided with this console as part of an optional personal environmental control. This heater can only be used in conjunction with HPL or LPL panels. Observe the following additional precautions: Do not touch the heaters hot surfaces. The normal depth of the desk for a seated operator is designed to prevent accidental contact. Do not partially or fully obstruct or cover the front of the heater: for example placing clothing over it or cardboard boxes in front of it. THIS MAY CREATE A FIRE HAZARD. Do not make holes of any kind in the heater. THIS COULD CAUSE DAMAGE AND CREATE A FIRE OR ELECTRICAL HAZARD. Rev. EC-AX-UM-V1.2 6

9 Chapter 2 Maintenance Cleaning Regular dusting / vacuuming of all surfaces is recommended to help maintain their beauty and longevity. CAUTION AVOID all abrasive cleaners (scouring pads or powders, scrub brushes, steel wool etc.) As they may scratch the surfaces permanently. AVOID spilling substances likely to stain (grape or cranberry juice, coloured soft drinks, mustard, etc.). KEEP chemical substances that may be corrosive or otherwise mar surfaces (including ammonia cleaners and petroleum solvents) clear of the console area. Laminates Cleaning Procedure 1 Clean surfaces with a soft damp cloth. 2 If stains are present, use a mild soap. Any ammonia-free kitchen counter cleaner may also be used for quick on-site cleaning. 3 Wipe all surfaces free from soap residue with a clean, damp (not wet) cloth and dry with a soft cloth (or air dry). Painted Surfaces Cleaning Procedure 1 Use a soft damp cloth (not wet) for general cleaning purposes. 2 If stains are present, use a mild soap. Avoid using any other cleaning fluid. Wood Veneer Cleaning Procedure (If Applicable) 1 Use a soft damp cloth (not wet) for general cleaning purposes. Rev. EC-AX-UM-V1.2 7

10 2 To protect the surface and enhance beauty, use a product such as Murphy s Oil Soap (or similar quality wood protector) Fabric Cleaning Procedure (If Applicable) 1 Use special vacuum attachments only when cleaning fabric panels, never use stiff fibre of metal brush. 2 Avoid any liquid cleaning agent. To remove spots, use a damp adsorbent cloth to soak excess liquid. Never soak fabric when cleaning. Magnetic Lift Column (Optional) Cleaning Procedure If an actuator becomes dirty it should be cleaned immediately in order to prevent the accumulation of residues. 1 Wipe the column with a damp cloth and water. If necessary a small amount of Isopropyl alcohol can be used. 2 Ensure that washing water with chemical additives is phneutral. Excessively acidic or alkaline water can permanently damage the columns. 3 High-pressure steam cleaning equipment must not be used. Work Surface (Polyurethane Waterfall and PVC) Nosing 1. Clean surface with a soft cloth dampened with mild soap and water only. 2. Avoid wiping the nosing surface with any acetone and isopropyl based cleaning agents as these can potentially cause significant deterioration of the nosing material. 3. Note that Evans Consoles cannot unfortunately recommend any specific cleaning agent or product because we cannot control the ever-changing new improved chemical formulations within each cleaning product. Rev. EC-AX-UM-V1.2 8

11 Magnetic Lift Columns Maintenance (Optional) Starting up The Start up Procedure is done at the Evans Consoles manufacturing facility. This is done by the following procedure: 1 Ensure that the installation and the electrical connections have been correctly carried out. 2 Press the switch for work surface control in the down position. Keep this key pressed until the table reaches the lower end position. The table then stops automatically. Keep pressed. After about 5 seconds the table again moves slowly downwards, until it reaches the absolute end position (only if Lift Columns are out of alignment). The table again stops automatically. 3 Before shipping the console, the table will be raised at least 3 inches from the lowest position. Reset Procedure In order to reset the Magnetic lift columns repeat steps 1 and 2 of the Start up Sequence. The Reset procedure shall be done periodically and after any power interruptions have been experienced. Door Hinge Adjustment Any Hinged panels on this console are easy to adjust and remove / reinstall. Removing and Reinstalling of Hinged Panels 1 To remove a hinged panel, simply press the rectangular release tab at the rear of the hinge towards the mount plate and pull the panel away from the hinge bracket (see circled area in figure below). 2 To install a hinged panel, align the hinges with the hinge brackets and snap into place. Plate Fixing Screws Rev. EC-AX-UM-V1.2 9 Release Tab

12 Adjustment 1 Using a Phillips (or a small Robertson) screwdriver, tighten or loosen the adjustment screws until panels are level and at the same height. If it is necessary to raise or lower the whole panel: Loosen the plate fixing screws and height adjustment screw. Move the panel into position. Tighten the height adjuster, then the plate fixing screws. 2 The left-hand screw head is used to adjust the left-right setting of the hinge. 3 The right-hand screw head will move the panel towards or away from the frame to ensure the panels are flush with one another on a vertical plane. 4 Maintain an even and equidistant gap between panels, ensuring they open and close without interference. Rev. EC-AX-UM-V1.2 10

13 Chapter 3 Replacement Parts Ordering Parts To order replacement parts for your Evans console, please contact Evans Client Services at (toll free) or visit our online E-Parts Department at: Please have the Project Name and Project Number on hand to ensure quicker service. Please be prepared to specify the part name and location, and allow Evans to do the research to ensure the correct part and finish is supplied for your specific project. Place Sticker Here Project Name Project Number Project Date Rev. EC-AX-UM-V1.2 11

SPØ1 OUTDOOR CARE INSTRUCTIONS

SPØ1 OUTDOOR CARE INSTRUCTIONS THANK YOU FOR YOUR PURCHASE OF AN SP01 PRODUCT. SP01 OFFERS AN INTERNATIONAL COLLECTION BUILT ON THE PRINCIPLES OF DESIGN INTEGRITY AND AUTHENTICITY. WORKING WITH NATURAL