JDW Leaf Blower. EQ750 - Assembly Instructions. Please Read All Instructions Thoroughly Before Starting Assembly

Transcription

1 JDW Leaf Blower EQ750 - Assembly Instructions Please Read All Instructions Thoroughly Before Starting Assembly 1

2 Components 1) Bottom Tube section 2) Rollers 3) Top Tube Section 4) Leaf collection bag s securing clip on the motor casing 5) Leaf collection bag 6) Blow/Vacuum function selector lever 7) Motor casing 8) Shoulder strap 9) ON/OFF switch 10) Variable speed dial 11) Button to adjust length of suction tube Warning - Please read and understand this operating manual before use and keep it for your future reference. 2

3 Application The blower vacuum is designed to blow/vacuum leaves as well as lawn debris such as grass clippings and small twigs. It is not to be used for any other purpose The device is only to be used on dry surfaces The device is intended for non-commercial use in private home and gardens. Under no circumstances is it to be used in public outdoor areas, sports stadiums or in agricultural or forestry settings. Safety Saftey-related icons on the device 3

4 Safety Safety Information 2.1 Familiarizing yourself with the blower X Read these instructions carefully so as to familiarize yourself with proper use of the device and its operating and control functions. X Under no circumstances should children be permitted to operate the blower. X Under no circumstances should persons who are unfamiliar with the contents of these instructions be permitted to operate the device. Ordinances and regulations in some municipalities may set a minimum age for operation of the blower. X Under no circumstances should the blower ever be operated when other persons, particularly children, or pets are nearby. X The user is liable for any accidents or damage incurred by third parties or their property. 2.2 Safety & Health Precautions X When you operate the blower, always wear full-length trousers, as well as sturdy, closed shoes that provide good support. X Under no circumstances should jewelry, any other body ornamentation, or loose clothing be worn while operating the device as these items could be drawn into the suction orifice. When working outdoors, rubber gloves and non-slip footwear should always be worn. If you have long hair, put it in a hair net. X Wear protective garb and goggles. Wearing protective garb such as a dust mask, non-slip footwear, protective gloves, a helmet and/or hearing protection (depending on the type and application of the electrical device concerned) reduces the risk of injury. X When performing work that generates dust, wear a breathing mask. X Each time you use the blower, check the integrity of the device s power cord and your own extension cord. The device should only be operated when its accessories are in perfect working order. Any damaged or defective components should be repaired immediately by a qualified technician. X Under no circumstances should the blower be operated while you are wearing damaged protective garb, shielding or without basic safely equipment such as a deflection device or collection bag. X Only extension cords that are rated for outdoor use should be used outdoors. Any extension cord used should measure a minimum of 1.5 mm across. X All plug-in connections should have an earthing contact and water-spray shielding. 4

5 Operating The Device X The Blower Vacuum must not be used or starting until it has been fully assembled. X Make sure the power cord is kept behind and away from the device while you work. X If the power cord or extension cord are damaged while you work, unplug the blower immediately. X Never use the power cord as a handle to lift or carry the device. X Always unplug the device under the following circumstances: When the blower is not in use, is being carried/transported, or is left unattended. While examining, cleaning or unclogging the device. When cleaning the device, performing maintenance on it, or attaching accessories to it. If the device strikes a foreign object or begins vibrating abnormally. X Use the blower in daylight or with adequate illumination. X Bear in mind that the force generated by an electrical device can make you lose your balance. Therefore, make sure that your feet are firmly planted and that your body is well balanced when you are operating the device. X Never operate the blower on damp or wet grass. X Using the blower on sloping areas: Do not work in areas with unduly steep slopes. X Use the blower as follows when working on slopes: X Always position yourself horizontally to the slope and make sure your feet are firmly planted. Exercise particular caution whenever you change directions while working on a slope. X Walk at a measured pace while operating the blower. Do not run X Keep the air outlet unobstructed and clean at all times. X Never direct the suction/blown air opening toward persons or animals. 5

6 Maintenance & Storage X Make sure that all screws, nuts and bolts are tight; doing this will ensure that the blower is safe to operate. X Check the leaf collection bag regularly for signs of wear and/or distortion. X For reasons of safety, any worn or damaged component should be replaced or repaired immediately by a qualified technician.x Under no circumstances should the blower ever be operated when other persons, particularly children, or pets are nearby. X When not in use, the machine should be stored in a dry location that is inaccessible to children. X The machine can be plugged into any volt AC outlet with 10 Amps of fuse protection. The electrical outlet is to be protected by an earth leakage circuit breaker (ELCB). with a max triggering current of 30 m Amps. Before Use Steps prior to operation Only operate the device after completely assembling it. Prior to each use, check the power cord for signs of damage. Under no circumstances should the power cord be used if it shows any signs of damage. Assembly Your new blower vacuum requires very little assembly work before it is ready for use. Press the button (11) and slide the suction tube to a suitable length for users. It can work on different lengths. 6

7 Assembly Attention Before fitting the leaf collection bag ensure that the vacuum/blower selector lever operates smoothly and that it is not obstructed by debris from the previous. Warning Any hard objects, such as stones, tin cans glass etc, will damage the suction fan. Do not use the vacuum-blower to suck up water or very wet debris. Never operate the vacuum-blower without the leaf collection bag fitted. Shoulder Strap: The shoulder strap(8) will be supplied inside the leaf bag. Take the shoulder strap out of the leaf bag, open the snap fastener, thread the strap through the metal clip on the top of the motor casing and then close the snap fastener. To adjust the shoulder strap to the required length, simply slide the adjustable strap buckle forward or backwards. Leaf Collection Bag: Turn the support frame into the correct position of motor housing (7). Lock the support at its place. Press the support to release the bag 7

8 Operation Ensure that the blower vac is only connected to conventional sockets with a V alternating current supply. Only use extension cables if they are really necessary. The use of extension cables may cause a drop in voltage, which will result in the machine not performing to its peak or the motor overheating. Switching ON/OFF Press the On/Off switch (9) to start machine. To stop the machine simply release the On/Off switch (9). Use/Operation. The easiest way to use the blower vacuum is to place the shoulder strap in a comfortable position over your shoulder and hold the rear handle at hip height so that the majority of the machine s weight rests on the rollers. When using the blower vacuum to pick up leaves it is best to move the machine on the rollers. This ensures that the blower vacuum is at the perfect height above the ground. The blower vacuum is designed only to pick up leaves. To avoid machine damage that is not covered by the warranty, do not use it to pick up branches, stones or other hard materials. When using the machine as a leaf blower always work away from solid objects such as walls, fences, etc. Whilst you work do not place the blower vacuum tube too close to the leaves. The machine will be more effective if you keep it at a certain distance away from the leaves and blow the leaves forwards. Switching Operating Mode 8

9 Operation Leaf Bag Note: Before you remove and empty the leaf collection bag ensure that the machine has been disconnected from the mains power supply. Maintenance Check the blower vacuum for any signs of damage before each use After using the machine 1) Empty the leaf collection bag. 2) Check the vacuum tube and remove leaf residue. 3) Check the blower vacuum s slide control for leaf residue 4) Clean the machine with a soft dry cloth. 5) Store the machine in a safe place where it is out of the reach of children. Technical Data Noise Emission Values Level of sound power measured according to EN 60335: LWA (Sound power level) 104 db(a) The machine may exceed 85 db(a) at the workplace In this case, noise protection measures need to be introduced to protect the user. 9

10 Technical Data Environment Should your machine need replacement after extended use, do not put it in the domestic waste but dispose of it in an environmentally safe way. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. 10

11 Please Retain Instructions For Future Use J.D. WILLIAMS & CO. LTD 40 LEVER STREET, MANCHESTER, UK, M60 6ES 11