C A T A L O G U E 2017/2018

Transcription

1 CATALOGUE 2017/2018

2 Content: Introduction HIGH PRESSURE What is high pressure? High pressure cleaners... 6 High pressure cleaner accessories COMPRESSED AIR What is compressed air? Advice and recommendations Piston compressors Screw compressors Compressed air treatment Compressed air accessories RENO: Your supplier 2 About RENO RENO is a leading manufacturer and supplier of compressed air solutions and high pressure cleaners for professional and industrial use. As a manufacturer and supplier of air compressors since 1952 and high pressure cleaners since 1978, RENO represents a piece of Danish industrial history. Today, we are the largest manufacturer of air compressors and through our position and experiences; we possess an extensive knowledge within the area. We provide a comprehensive program of air compressors and high-pressure cleaners through both Danish and International dealers. We also offer specialized and customized solutions based on screw compressors and high-pressure cleaners for the Danish industry e.g. industrial solutions, project sales, construction and OEM. Additionally we have a nationwide service organization. RENO is located in Thyregod, where we produce, assemble and stock our products and implement sales and customer support, as well as we have divisions in Gadstrup and Egaa from where we handle industrial sales, service and administration. The company has 65 dedicated employees and represents leading capabilities within the industry. RENO Dealer Sales RENO s Dealer Sales division handles RENO s sales activities through dealers, and RENO is one of Denmark s leading suppliers within this area. RENO s Dealer Sales division offers the product range presented in this catalogue i.e. air compressors, high-pressure cleaners and accessories. Furthermore, we offer our partners access to the rest of our organization i.e. strong competences within industrial solutions and installation/service. For many years, RENO has, in close cooperation with our dealers and end users developed a comprehensive product program that keeps us on the cutting edge. The majority of the product line is developed and built in our own factory in Denmark, which also enables us to offer customized products. Our broad product range ensures that we can meet all needs within the following industries: > Agriculture > Auto and transportation > Building and construction > Food and industrial

3 HIGH PRESSURE INFO High pressure solution Standard and customized solutions Our high pressure program is represented by the brand RENO that meets the needs of professionals as well as industrial users with both mobile and stationary installations. RENO represents a range of market leading cleaners. 3

4 HIGH PRESSURE INFO What is high pressure? Today, water under a high pressure is the optimal solution for the removal of dirt. The idea of a high-pressure cleaner is that water under pressure is forced through a nozzle in order to increase the cleaning effect of the water. A high-pressure cleaner can be described as a high-tech water gun. However, it differs on a number of parameters: Pressure (low pressure vs. high pressure) Traditionally, high-pressure cleaners work at a pressure in the range of bar. As the pressure increases the ability to loosen the coating/dirt will also increase. Higher pressure therefore contributes to a faster cleaning. Water flow A high-pressure cleaner typically uses liters of water per minute, which is equivalent to only 10-30% of the consumption in a traditional garden hose. High pressure is therefore more water conserving and has a larger cleaning effect. In order to get hot water, the following options can be used: 1. A cold-water cleaner can be connected to a hot-water tap-only remember that the inlet temperature should never exceed 60 C. 2. A cold-water cleaner can tap water through a hotbox (oil boiler with a high-pressure heating coil), which heats the water to between 40 and 120 C. 3. A hot-water cleaner works with the same principle as a cold-water cleaner, except water (under pressure) is heated to a temperature between C in a built-in oil-fired boiler with a high-pressure heating coil. Installations (mobile vs. stationary) Stationary plants are normally used on locations with regular cleaning. A stationary plant reduces the amount of hoses and cables. When choosing a stationary plant, it is also possible to integrate several pumps, where multiple users can use the system simultaneously. A mobile plant is used when cleaning needs vary or where high flexibility is needed. A larger amount of water will also increase the cleaning effect, as the cleaner will be able to clean a larger area at a time. In addition, a large amount of water will cause a flushing effect, which will remove dirt from the cleaning area. The water flow is a crucial parameter for efficient cleaning just like the pressure. Temperature (cold vs. hot water) Normally at higher temperature the detergency will increase, caused by an improved resolution. Cold-water cleaners are used for cleaning of soil and water-soluble dirt etc., while hot water normally is used for cleaning of grease and oily (mineral/ animal) dirt and coating. Cleaning products Cleaning products are together with the amount of water, the pressure and the temperature a fourth essential element in achieving a high cleaning effect. > The idea of high pressure is that water under pressure is forced through a nozzle in order to increase the cleaning effect of the water > The amount of water of the high-pressure cleaner is equivalent to only 10-30% of the consumption in a traditional garden hose > Cold-water high-pressure cleaners are traditionally used for cleaning of soil and water-soluble dirt etc. FACTS A high pressure cleaner installation consists of: 4 Pressure: > Piston pump > Motor > Expansion tank Energy source: > Power; single-phase/three-phase > Gas > Petrol or diesel powered > Hydraulics Water supply: > Through a hose > Through a tank (cold water or hot water) Piping: > 15 mm. pipe (max. recommended l./min.: 25) > 22 mm. pipe (max. recommended l./min.: 80) Hose reel/hose: > 20 m. automatic hose reel > 40 m. automatic hose reel > 50 m. manual > 100 m. manual

5 Choice of high pressure cleaners How to choose a high-pressure cleaner Large models complete the task faster and they are designed for a more intensive use. For larger tasks and intensive use an underpowered cleaner will not be viable caused by increased costs of employee hours and operation. An oversized high pressure cleaner can on the other hand be an uneconomic investment. Our technical advisors are therefore always at your disposal with advice and guidance for dimensioning of high pressure cleaners. Which cleaning quality is required? The cleaning quality can be categorized into four basic levels: > Visually clean > Bacteriologically clean > Physically clean > Chemically clean In case of high quality requirements a powerful high pressure cleaner is needed. HIGH PRESSURE INFO Before deciding which high pressure cleaner to choose, you should consider the following elements: Which parameters to consider? The type of dirt/coating to be cleaned is decisive for which high pressure cleaner to choose. The type is defined based on the following parameters: > Pressure > Water flow > Temperature > Additives for the water (optional) Selection of nozzle Cleaning intensity and scope: The high pressure cleaner must be designed in accordance to the required cleaning intensity and conditions, i.e. whether you should choose a stationary or mobile solution and a powerful or less powerful model. Accessories: RENO has a wide range of traditional accessories. Additionally we offer foam lances, injectors, telescopic lances, turbo nozzles etc. PRESSURE (BAR) WATER FLOW (L/MIN) Nozzle Drilling no. /mm xx03 1,09 3,1 3,7 4,3 4,8 5,3 5,7 6,1 6,3 6,8 7,1 7,4 7,7 8,0 8,3 8,6 8,9 9,1 9,3 9,5 9,7 9,9 10,1 10,3 10,5 10,6 11,2 11,4 11,6 11,8 xx04 1,19 4,2 5,2 5,9 6,6 7,3 7,8 8,4 8,9 9,4 9,8 10,3 10,7 11,1 11,5 11,9 12,2 12,6 12,9 13,3 13,6 13,9 14,2 14,5 14,8 15,1 15,4 15,7 16,0 16,3 xx045 1,27 4,5 5,5 6,4 7,1 7,8 8,4 9,0 9,6 10,2 10,6 11,0 11,4 11,8 12,2 12,6 13,0 13,4 13,8 14,2 14,6 15,0 15,3 15,6 15,9 16,2 16,7 17,1 17,4 17,7 xx05 1,35 5,0 6,2 7,1 8,0 8,7 9,4 10,0 10,7 11,3 11,9 12,4 12,9 13,4 13,9 14,3 14,7 15,1 15,5 15,9 16,3 16,7 17,1 17,5 17,9 18,2 18,6 18,9 19,2 19,6 xx055 1,40 5,6 6,8 7,8 8,7 9,6 10,3 11,1 11,8 12,4 13,0 13,6 14,2 14,8 15,3 15,8 16,3 16,7 17,1 17,5 17,9 18,3 18,7 19,1 19,5 19,9 20,4 20,7 21,1 21,5 xx06 1,47 6,0 7,4 8,6 9,6 10,4 11,3 12,1 12,8 13,6 14,2 14,8 15,4 16,0 16,6 17,1 17,6 18,1 18,6 19,1 19,6 20,1 20,5 20,9 21,3 21,7 22,3 22,7 23,1 23,5 xx065 1,52 6,6 8,0 9,3 10,4 11,3 12,3 13,2 14,0 14,7 15,4 16,1 16,8 17,4 18,0 18,7 19,4 19,9 20,4 20,9 21,4 21,9 22,4 22,9 23,4 23,8 24,1 24,6 25,0 25,5 xx07 1,60 7,1 8,6 10,0 11,2 12,2 13,2 14,1 15,0 15,3 16,6 17,3 18,0 18,7 19,4 20,0 20,6 21,1 21,8 22,4 22,9 23,4 23,9 24,4 24,9 25,4 25,9 26,4 26,8 27,3 xx075 1,65 7,6 9,3 10,7 12,0 13,1 14,2 15,2 16,1 16,9 17,8 18,6 19,3 20,1 20,8 21,5 22,2 22,8 23,4 24,0 24,6 25,2 25,8 26,3 26,8 27,3 27,9 28,4 28,9 29,4 xx08 1,70 8,0 9,8 11,3 12,7 14,0 15,1 16,1 17,1 18,0 18,8 19,6 20,4 21,2 22,0 22,8 23,5 24,2 24,8 25,4 26,0 26,6 27,2 27,8 28,4 29,0 29,5 30,1 30,6 31,1 xx09 1,80 9,1 11,1 12,8 14,3 15,7 17,0 18,0 19,2 20,2 21,2 22,1 23,0 23,9 24,7 25,5 26,3 27,1 27,8 28,5 29,2 29,9 30,6 31,3 31,9 32,5 33,2 33,8 34,4 35,0 xx10 1,90 10,0 12,3 14,2 16,0 17,4 18,9 20,1 21,4 22,5 23,6 24,6 25,6 26,6 27,6 28,5 29,4 30,2 31,0 31,8 32,6 33,4 34,1 34,9 35,6 36,3 36,9 37,6 38,3 38,9 xx11 1,98 11,1 13,6 15,7 17,6 19,3 20,8 22,2 23,6 24,9 26,1 27,3 28,4 29,5 30,5 31,5 32,5 33,4 34,3 35,2 36,1 36,9 37,7 38,5 39,3 40,1 40,9 41,6 42,4 43,1 xx12 2,08 12,1 14,8 17,2 19,2 21,0 22,7 24,3 25,8 27,1 28,4 29,7 31,0 32,3 33,3 34,3 35,3 36,3 37,3 38,3 39,3 40,2 41,1 42,0 42,8 43,6 44,5 45,3 46,1 46,9 xx13 2,16 13,2 16,1 18,6 20,8 22,8 24,6 26,3 27,9 29,4 30,7 32,1 33,4 34,7 36,0 37,2 38,3 39,4 40,5 41,5 42,5 43,5 44,5 45,5 46,4 47,4 48,2 49,1 50,0 50,8 xx15 2,40 14,0 18,5 21,3 23,9 26,1 28,3 30,2 32,1 33,8 35,3 36,9 38,4 39,9 41,3 42,6 44,3 45,4 46,6 47,7 48,3 48,9 49,2 51,5 53,3 54,4 55,6 56,5 57,7 58,8 Example: Find the right nozzle If your high-pressure cleaner is at 160 bar and the water volume is 19 l./min. (find nearest amount in the schedule above) it is recommended to use the nozzle size 065 Important: It is important that the water flow/pressure matches the high pressure cleaner. A wrong choice of nozzle means less water or unnecessary stop/circulation Exhaust pipe system for hot-water high-pressure cleaners 5

6 HIGH PRESSURE MOBILE COLD-WATER CLEANERS MOBILE COLD-WATER CLEANERS Hobby / Professional Cold-water cleaners hobby Model Compact 160 Motor (kw/hp/a) 1,1/1,5/7 RPM 2800 Max. pressure (bar) 160 (EW) Water flow (l/min.) 7 HP-hose (m) 7 Cable (m) 3 Detergents (max.) 10% Weight (kg) 13 WxDxH (cm) 52x23x36 Art. no. 10 EUR 305 Cold-water cleaner Model 120/8 Motor (kw/hp) 2,2/3 RPM 2800 Max. pressure (bar) 130 Water flow (l/min.) 8,3 HP-hose (m) 8 Cable (m) 5 Detergents (max.) 10% Weight (kg) 18 WxDxH (cm) 38x25x24 Art. no. 110 EUR 590 Cold water cleaner professional Model RENO 170/14 M170/14 Motor (kw/hp/a) 4/5,5/9 4/5,5/9 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C HP-hose (m) 8 8 Cable (m) 7 7 Detergents (max.) 10% 10% Nozzle no Rotary nozzle no Weight (kg) WxDxH (cm) 60x40x40/70 60x40x40/70 Art. no. 14 M17014-M4 EUR Industrial cold-water cleaner / pressure less controller Model 160/19 200/15 195/18 170/21 Motor (kw/hp/a) 5,5/7,5/11 5,5/7,5/11 6,5/9/14 6,5/9/14 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C 60 C HP-hose (m) Cable (m) Nozzle no Rotary nozzle no Weight (kg) WxDxH (cm) 95x60x85 95x60x85 95x60x85 95x60x85 Art. no. M16019 M20015 M19518 M17021 EUR

7 COLD-WATER CLEANERS For industrial use / Pressureless controllers Industrial cold-water cleaners Model 250/15 220/18 200/21 170/25 Motor (kw/hp/a) 7,5/10/15 7,5/10/15 7,5/10/15 7,5/10/15 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C 60 C HP-hose (m) Cable (m) Nozzle no Rotary nozzle no Weight (kg) WxDxH (cm) 110x65x61/80 110x65x61/80 110x65x61/80 110x65x61/80 Art. no. M25015 M22018 M20021 M17025 EUR Industrial cold-water cleaners Model 200/30 170/35 150/41 Motor (kw/hp/a) 11/15/22 11/15/22 11/15/22 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C HP-hose (m) Cable (m) Nozzle no Rotary nozzle no Weight (kg) WxDxH (cm) 110x65x61/80 110x65x61/80 110x65x61/80 Art. no. M20030 M17035 M15041 EUR HIGH PRESSURE MOBILE COLD-WATER CLEANERS Mobile high pressure cleaners bar Model 200/35 400/18 500/15 Motor (kw/hp/a) 15/20/30 15/20/30 15/20/30 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C Nozzle no /1 Rotary nozzle no Weight (kg) WxDxH (cm) 120x75x70 120x75x70 120x75x70 Art. no. M20035 M40018 M50015 EUR

8 HIGH PRESSURE STATIONARY CLEANERS STATIONARY CLEANERS Industrial cleaners / Pressureless controllers Stationary Economic high pressure cleaners Model St. 120/12 St. 175/15 St. 160/19 Motor (kw/hp/a) 2,2/3/5 4/5,5/9 5,5/7,5/11 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C Nozzle no Rotary nozzle no Weight (kg) WxDxH (cm) 72x42x65 72x42x65 72x42x65 Art. no. SE12012 SE17515 SE16019 EUR Stationary Economic high pressure cleaners Model St. 170/21 St. 200/21 St. 170/25 Motor (kw/hp/a) 6,5/9/14 7,5/10/15 7,5/10/15 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C Nozzle no Rotary nozzle no Weight (kg) WxDxH (cm) 72x42x65 72x42x65 72x42x65 Art. no. SE17021 SE20021 SE17025 EUR Stationary Economic high pressure cleaners Model St. 170/35 St. 200/30 St.150/41 Motor (kw/hp/a) 11/15/22 11/15/22 11/15/22 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C Nozzle no Rotary nozzle no Weight (kg) WxDxH (cm) 72x42x65 72x42x65 72x42x65 Art. no. SE17035 SE20030 SE15041 EUR Stationary high-pressure cleaners Model St. 175/15 St. 160/19 St. 200/21 Motor (kw/hp/a) 4/5,5/9 5,5/7,5/11 7,5/10/15 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C Nozzle no Rotary nozzle no Weight (kg) WxDxH (cm) 90x47x67 90x47x67 90x47x67 Art. no. S17515 S16019 S20021 EUR

9 HIGH PRESSURE CLEANERS Stationary / Hotbox / Hot-water cleaners Stationary high pressure cleaners Model St. 170/25 St. 170/35 St. 200/30 St. 150/41 Motor (kw/hp/a) 7,5/10/15 11/15/22 11/15/22 11/15/22 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C 60 C Nozzle no Rotary nozzle no Weight (kg) WxDxH (cm) 90x47x67 90x47x67 90x47x67 90x47x67 Art. no. S17025 S17035 S20030 S15041 EUR Double stationary high pressure cleaners Model St. 200/42 St. 200/42 St. 170/50 St. 200/60 Motor (kw/hp/a) 2 x 7,5/10/30 2 x 7,5/10/30 2 x 7,5/10/30 2 x 11/15/44 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C 60 C Softstart No Yes Yes Yes Nozzle no. 2 x x x x Rotary nozzle no. 2 x x x x 94 Weight (kg) WxDxH (cm) 90x47x165 90x47x165 90x47x165 90x47x165 Art. no. S20042 S20042-SOFT S17050-SOFT S20060-SOFT EUR HIGH PRESSURE STATIONARY CLEANERS GEYSER Stationary hot-water high pressure cleaners Model GEYSER S6 GEYSER S8 Motor (kw/hp/a) 5,5/7,5/12 7,5/10/16 incl. Softstart RPM Max. pressure (bar) Water flow (l/min.) Automatic start/stop Yes Yes Water temp. (max.) 110 C* 110 C* HP-hose (m) Cable (m) 8 8 Nozzle no Rotary nozzle no WxDxH (cm) 115x58x x58x159 Weight (kg) Art. no. SH16019 SH20021 EUR * With reduced water flow Hotbox Model Hotbox BRD 750 Hotbox BRD 900 Motor (kw/hp/a) 0,25/0,3/1,4 1x230V. 0,25/0,3/1,1 Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 110 C 140 C* Weight (kg) WxDxH (cm) 40x64x80 65x100x120 Art. no. 19 HB9025-F1 EUR * With reduced water flow 9

10 HIGH PRESSURE MOBILE CLEANERS MOBILE CLEANERS Hot water / Hydraulic / Model for integration Hot water cleaners Model HW4000 HW6000 HW7500 Motor (kw/hp/a) 4/5,5/10 5,5/7,5/12 6,8/9/14 RPM Max. pressure (bar) Water flow (l/min.) Automatic start/stop Yes Yes Yes Water temp. (max.) 110 C* 110 C* 110 C* HP-hose (m) Cable (m) Nozzle no Rotary nozzle no WxDxH (cm) 95x70x75 95x70x75 95x70x75 Weight (kg) Art. no. H16015 H16018 HW20018-F4 EUR * With reduced water flow GEYSER Hot water cleaners Model GEYSER M6 GEYSER M7 GEYSER M8 Motor (kw/hp/a) 5,5/7,5/12 6,8/9/14 7,5/10/16 RPM Max. pressure (bar) Water flow (l/min.) Automatic start/stop Yes Yes Yes Water temp. (max.) 110 C* 110 C* 110 C* HP-hose (m) Cable (m) Nozzle no Rotary nozzle no WxDxH (cm) 110x80x96 110x80x96 110x80x96 Weight (kg) Art. no. HW16018 HW20018 HW20021 EUR * With reduced water flow Hydraulic cleaners Model 170/14 250/35 200/21 Motor (kw/hp) 4/5,5 15/20 7,5/10 RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C Ceramic pistons Direct coupling Yes Yes Yes Oil motor RPM Oil volume (l/min) 16 Oil pressure (bar) 170 >200 >200 Flow control Yes No No HP-hose (m) Nozzle no Rotorende Nozzle no Weight (kg) Pump Oil motor Art. no. 775 O25035 O20021 EUR Model 170/14 Model 250/35 & 200/21 10

11 HIGH PRESSURE CLEANERS Special Solutions / Diesel / Petrol Motocross high pressure cleaner Model 110/13 Motor (kw/hp) 3/4 - Honda RPM 3400 Max. pressure (bar) 110 Water flow (l/min.) 13 Water temp. (max.) 60 C HP-hose (m) 8 Detergents (max.) 10% Nozzle no Weight (kg) 30 WxDxH (cm) 49x34x44 Art. no. 31 EUR HIGH PRESSURE CLEANERS Petrol operated high pressure cleaners Model PD120/13 PD200/15 PD220/18** Motor (kw/hp) 4/5,5 8,3/11* 10/13* RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C 60 C HP-hose (m) Detergents (max.) 10% Nozzle no Rotary nozzle no Weight (kg) WxDxH (cm) 70x65x65 90x65x75 90x65x75 Art. no. 30 Honda B20015 B22018 EUR * With Honda Motor og Gear Box ** Electric start incl. battery. Art no. B Peice EUR Gasoline operated industrial high pressure cleaners Model B200/30 B200/40 Motor (kw/hp) 15/20* 15/20* RPM Max. pressure (bar) Water flow (l/min.) Water temp. (max.) 60 C 60 C HP-hose (m) Nozzle no Rotary nozzle no Weight (kg) WxDxH (cm) 80x40x50 80x40x50 Art. no. B20030 B20040 EUR * Honda Motor GEYSER Diesel operated hot water cleaners Model GEYSER SD15 Motor (kw) 14,9* RPM 1400 Max. pressure (bar) 260 Water flow (l/min.) 21 Water temp. (max.) 110 C with reduced water flow Weight (kg) 355 WxDxH (cm) 144x80x109 incl. exhaustpipe Art. no. DHW26021 EUR * Kubota watercooled diesel engine 11

12 HIGH PRESSURE ACCESSORIES 12 (3) (3) ACCESSORIES Angles / Pipe supports / Straight coupler / Valves / Coupling hoses (3) (3) Elbows 15 mm x 1/ mm x 1/ mm with union nut mm with union nut mm with pipes (3) mm with pipes (3) Tees 15 mm mm mm with pipes mm with pipes x15x22 mm mm* /1 99 * Cross tee/tee olive Straight coupler 15 mm x 3/ mm x 1/ mm x 1/ mm mm Pipe support / fixtures 15 mm pipe support (2 parts) mm pipe support (2 parts) ,5 Fitting/pipe stainless 55 mm Fitting/pipe stainless 100 mm (3) Fitting/pipe stainless 200 mm (3) Hexagon bolt M6 x 40, stainl ,5 M6 Lock nut, stainless ,7 M6 Washer, stainless ,7 Rubber board For pipe support ,5 Pipe support 15 mm 15 mm pipe support Fitting Hexagon bolt (3) Pipe support 22 mm 22 mm pipe support ,5 Fitting ,5 Hexagon bolt (3) Bracket for feeding tube Feeding tube bracket Feeding tube 38 mm ,5 Feeding tube 54 mm Rohr Ø15 x 1,5 mm galvanized Request Ø22 x 2,0 mm galvanized Request Ø15 x 1,5 mm stainless Request Ø22 x 2,0 mm stainless Request Available in lengths of 6 meter. Reduced straight coupler 22 mm x 15 mm reduction Olives / nuts 15 mm galvanized / mm galvanized / mm stainless / mm stainless / mm union nuts mm union nuts Dust binder Dust binding head Dust binding head incl. fitting solenoid valve and timer Solenoid valve high pressure 3/8 incl. coil 220V. 200 bar /2 incl. coil 220V. 200 bar Timer Automatic power control Shut-off ball valve 3/8 x 3/ /2 x 1/ Shut-off ball valve complete 3/8 x 3/8 - complete /2 x 1/2 - complete Incl. straight coupler, olive, hexagon nipple and nipple for quick coupling Frost proof taps 3/ Coupling hoses 3/8 x 1/2 m. 3/8-3/8 nip /2 x 1/2 m. 15mm u. nut / mm u. nut 3/8 x 1/2 m. 15mm u. nut /3 19 3/8 nippel 1/2 x 1/2 m. 15mm u. nut /4 25 1/2 nippel 3/4 x 1 m. 22mm u. nut / mm u. nut 3/8 x 1 m. 3/8 nip / 3/ /8 x 2 m. 15mm u. nut - 3/ /8 x 4 m. 3/8 nip / 3/8 nip Sealing ring 1/ / / ,5

13 (3) (4) (5) (3) ACCESSORIES Quick couplings / Nipples / Nozzles / Rotating nozzles Screw couplings / nipples Screw coubling 1/4 male ,5 Screw coubling 1/4 female ,5 Nipple 1/4 female Nipple 1/4 male Quick couplings / nipples Quick coupling. 1/4 female Quick coupling. 3/8 female Nippel 3/8 female Nippel 3/8 male (3) Nippel 1/4 female Nippel 1/4 male (3) O-ring for Quick coupling (4) 217 1,5 Teflonring for Quick coupling (5) Quick couplings / nipples (KEW) Quick coupling. 3/8 KEW Quick coupling. 3/8 KEW st.l. 210/1 40 Quick coupling. male 22 x 1,5 m Quick coupling. 1/2 KEW st.l O-ring, set 212/1 5 Nipples Nippel 3/8 for ,5 Nippel for 210/1, stainless 211/1 23 Nippel, female x 1,5 mm (3) ,5 Nippel 1/2 for 310, stainless Water couplings / nipples Water coupling 3/ Nippel 3/4 for water coupl Quick couplings / nipples (Kärcher) Coupling, union, nipple 230 7,5 Nipple for Kärcher coupling O-ring, Kärcher nipple,10x2mm 232 1,5 Nippel 1/4 x 40 mm Nippel 1/ Water sand blaster For the Compact series Sewer cleaning nozzles Sewer stainless steel3/ Sewer, rot.1/4 female Sewer, rot.3/8 female Sewer 10, 3/ Sewer cleaning nozzles Sewer noz. stainless 3/ Sewer noz., 1/4 female Sewer noz., 3/8 female Nozzles Nozzle /1 15 Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle 6530, brass Dyse 1503, brass Nozzle protection Reno Killer rotary nozzles 250 bar Reno Killer 045 blue Reno Killer 050 purple Reno Killer 055 red Reno Killer 060 green Reno Killer 065 light blue Reno Killer 070 orange Reno Killer 080 gray HD Killer rotary nozzles 450 bar HD Killer HD Killer HD Killer HD Killer HD Killer HD Killer HD Killer HD Killer HD Killer HD Killer Rotating nozzles Kärcher nozzles Kärcher nozzles repair kit 04 69/1 86 Kärcher nozzles Kärcher nozzles repair kit 05 73/1 86 Kärcher nozzles 055/ Kärcher repair kit 055/060 78/1 86 Kärcher nozzles 070/ Kärcher repair kit 70/080 79/1 86 Kärcher nozzles Kärcher rotary repair kit 10 94/1 86 Kärcher nozzles Kärcher nozzles Turbo nozzle 500 bar stainless PA nozzle HIGH PRESSURE ACCESSORIES 13

14 HIGH PRESSURE ACCESSORIES ACCESSORIES Foam Lance / HP hoses (3) Special oil For high pressure, 1 l Descaling high pressure Special oil / ALTO Line water filters Filter 3/4 with cartridge Filter cartridge 3/ Filter Filter cartridge Filter 1 1/ Self-cleaning sieve filter Sieve filter 3/4, 50 my, 30 l/min Sieve filter 1, 50 my, 50 l/min Sieve filter 1 1/2, 50 my, 130 l Removes particles of all sizes down to 50 micron (0.05 mm). Foam equipment Foaminjector KEW* Lance for foam equipment Injector KEW incl.quick coupl. (3) Foam injector (3) * Incl. bypass Foam lance incl. receiver Foam lance w/ 2 ltr. bottle Foam lance complet max 25 l 264K 138 Foam lance complet max 41 l 264K3 138 Nippel 3/8 female Nippel 1/4 male Coupler 3/8-1/4, female RA Extra bottle Rotating brushes Brush with lance pro Brush for Compact-series NB: Brushes are not suitable for use on rough surfaces. Water sand blasting nozzles Nozzle Nozzle Sewer cleaning kit Sewer cleaning nozzle for the Compact series HP-hoses 1/4, 7 m for Compact-series /8, 8 m, 210 bar /8 10 m, 500 bar HP-hoses Non-marking 315 bar 3/8, 10 m, 315 bar, 150 C /1 84 3/8, 15 m, 315 bar, 150 C / /8, 20 m, 315 bar, 150 C / /8, 25 m, 315 bar, 150 C / /8, 30 m, 315 bar, 150 C / /8, 40 m, 315 bar, 150 C / /8, 50 m, 315 bar, 150 C /1 415 HP hoses 400 bar 3/8, 10 m, 400 bar /8, 15 m, 400 bar /8, 20 m, 400 bar /8, 25 m, 400 bar /8, 30 m, 400 bar /8, 40 m, 400 bar /8, 50 m, 400 bar HP hose with abresion ball Hose with sliding rollers, pr. m Hose rack Rack for hose, big High-performance mud sucker Mud sucker kit Boot washer 2 m Boot washer Cleaning kit/feeding system, 2 mtr. Cleaning kit 06 nozzle Cleaning kit 10 nozzle Pressure expansion 5.0 ltr. 2 l press. exp., 10 bar, 1/ Pressure expansion 5 l., bar. 3/4, Incl. bracket & fittings 14

15 Automatic hose reel 400 bar 15 m without hose m without hose m 3/8 w/hose 2 layers m 3/8 w/hose 2 layerss Swivel Manual hose reel Manual hose reel, stainless m without hose 3/8 Manual hose reel, stainless m without hose 3/8 Manual hose reel, stainless m without hose 3/8 Swivels, Alu Swivels, Steel Automatic hose reel 400 bar 40 m without hose 3/ Revolving arm 4478/1 165 ACCESSORIES Hose reels / Hoses / Revolving arm Auto. reel for HP hoses 400 bar 20 m stainless without hose Auto. hose reel stainless 40 m without hose, stainless m 3/4 without hose, stainl Revolving arm Revolving arm for 15/20 m Fits hose reel 4485, 4487 HIGH PRESSURE ACCESSORIES High pressure cleaners for industrial use We are specialists in customized solutions and project sales Customized solutions We are specialists in development and optimization of high pressure products. In close collaboration with leading Danish customers we design and develop customized solutions at our factory in Denmark. Project sales RENO offers to plan and design the complete high pressure installation with stainless steel piping. With our own service department RENO also provides complete installation of cleaners and piping systems and we ensure a durable and time efficient solution of high quality. OEM (Original Equipment Manufacturer) Due to many years of experience within high quality high pressure cleaners a large number of RENO s products are an integrated part in the end-product in a number of reputable manufacturers. In case of any questions or need for advice please contact us at tel

16 HIGH PRESSURE ACCESSORIES ACCESSORIES Spray gun / Lances / Nipples / Jet pipes / Floor cleaners (3) Spray Gun Spray gun, pressure relieved Manchet for gun pistol grip X 5 Spray gun, standard Spray gun, press. relieved* Spray gun, freeze stop * Incl. swivel (3) Coupling KW 1/4 coupling nipple * /4 coupling-stainl. nipple * /26 40 * For spray gun & (3) Double jet pipes Dbl. jet pipe for turbo nozzle Dbl. jet pipe turbo nozzle* * Stainless Cleaning kit, short KEW compatible Lance incl. dbl. jet pipe R 94 Lance incl. dbl. jet pipe, turbo R 94 Swivels Swivel, 3/8, professionel Swivel, 3/8, prof. stainless Gun low pressure Gun 60 l, 24 bar Gun 100 l, 24 bar (3) Gun / Lances 60 cm dbl. jet pipe, stainl Lance incl. coupling Gun, standard (3) Double jet pipes incl. throttle Double jet pipe incl throttle, 500 bar Gun, 500 bar Individual jet pipes stainless 50 cm, single. stainless cm. single. stainless cm, single. stainless cm, single. stainless cm, single. stainless cm, single. stainless Suckets 1/ Spaceholders /1 3 (5) (4) Cleaning set KEW comp. Lance incl. double jet pipe, R 90 LP nozzle and nipple (3) Lance with side handle (4), R 100 dbl. jet pipe, LP nozzle, and nipple (3) Stainless lance w/dbl. jet pipe, R 90 nipple for turbo nozzle (5) Gun press. rel., w/ coupl Plug KEW (3) (3) Plug KEW 1/4 female plug /4 male plug Valves 1/4 double needle valve Valve w/ handle for dbl. jet Cleaning set short 1/4 male, plug /4 dbl. with valve Nozzle 6530, brass (3) (3) Lance Double jet, 210 mm

17 (3) Cleaning set Gerni compatible Gun, pressure relieved w/ coupl., lance and swivel Plug 1/4, male Double jet pipe w/ side handle, low-press. nozzle (3) Double Jetpipes 50 cm, dbl. jet, stainless cm, dbl. jet, stainless cm, dbl. jet, stainless cm, dbl. jet, stainless ACCESSORIES Spray gun / Long lances / Tank cleaner (3) Lances Lance stainless, w/side handle /1 29 Lance with couplings Lance for Compact series (3) Telescope lance Telescope lance 7,2 m Telescope lance 5,6 m HIGH PRESSURE ACCESSORIES Lances Lance stainless steel, 80 cm Lance stainless steel, 100 cm Lance stainless steel, 150 cm Tankcleaner Tankcleaner Bracket, stainless steel, incl. gasket High-pressure cleaner for tank cleaner see page 9 Floor cleaner stainless steel Floor cleaner, stainless steel, 40 cm.* * With variable pressure control. Incl. 4 nozzles size 015. Crib Cleaner Cleaner for cribs Variable lances Variable lance 85 cm Variable lance 106 cm /1 175 Variable lance 150 cm /2 200 Side handle for lance /9 17 Floor cleaner Floor cleaner, stainless Ø 30 cm, 100 cm lance with KEW plug Floor cleaner, stainless Ø 41 cm, 100 cm lance with KEW plug Excl. nozzles Floor cleaner stainless steel Floor cleaner, stainless, Ø 52 cm excl. nozzles (accommodates 2 nozzles) 17

18 COMPRESSED AIR INFO What is compressed air? Compressed air is air kept under a pressure that is greater than the atmospheric pressure Atmospheric air has a pressure of 1 bar. At a pressure of 10 bar, the air is compressed 10 times and the volume is decreased to 1/10 of the volume of the atmospheric air (Ex. 100 liters of atmospheric air will have a volume of 10 liters at a pressure of 10 bar). 1 atmosphere pressure 1 bar 14.5 psi. 0.1 MPa. Please note that the pressure gauge shows the pressure, ie. 0 (zero) bar at atmospheric pressure, which means that the absolute pressure is 1 plus the measured pressure. product. When compressed air is produced at a high temperature due to the heat generation, the air is able to absorb the additional moisture. When the compressed air is lead through the air installation (pipes and air receiver), the refrigeration of the air decreases the ability to absorb moisture. The moisture will then condense into water. The water in the compressed air system can be removed through drainage (mechanical or automatic) or using a refrigeration dryer or a desiccant dryer. The recommended is to operate with dry air, which refers to a high quality of air. Compression develops heat (natural law) During compression of the air, the energy consumption of the compressor is converted into heat regardless of technology and brand. The heat generation demands the correct dimensions of the cooling system. Heat generation creates an interesting basis for heat recycling. Compression develops water as a waste product (natural law) Compression of air increases the concentration of moisture in the air, and the moisture condenses into water as a waste Compression increases the concentrations of particles/toxins in the compressed air The compressed air contains the items/particles, which are sucked into the compressor as well as oil residues from the compressor in a higher concentration equivalent to the pressure, i.e. 10 times at 10 bar. A special attention should be paid to water in the compressed air installation, as it is often the major cause to oil residues in the air, as the oil binds to the water. In order to obtain the desired air quality the particles can be removed from the compressed air using filters. Air compressors About air compressors An air compressor basically works after the same principles as a bicycle pump, and it is typically defined based on a number of parameters: Compression technology: > A piston compressor consists of one or more pistons which compresses the air. Piston compressors are well suited for compressing at intervals. The loading rate should not exceed 50-60% (see page 4). > A screw compressor consists of two counter-rotating screws (male and female screw), which compresses the air. The screws are usually oil-cooled (directly on the screws) in a closed system. The oil cooling causes that the temperature regardless of loading rate and pressure rarely exceeds 80 C. Screw compressors are optimized for continuous operation and can withstand loads up to %. Compression steps: > A one-stage compressor compresses the atmospheric air directly with one or more pistons. Often used at pressures up to 10 bar on piston compressors. > Multi-stage compressors compresses the air in several steps, which makes the compressor able to deliver a higher pressure (usually pressures above 10 bar). Power source: > Power: Single-phase/three-phase > Petrol or diesel powered > Hydraulic Lubrication: > An oil-lubricated compressor increases the risk of oil residues in the compressed air. > An oil-free compressor uses materials in Teflon or carbon fibers in the cylinder and sealed bearings. The air from an oil-free compressor is therefore without oil. Air receiver: > Air receivers are often used on smaller/medium standard set compressors. > Separate air receivers are used in the development of customized solutions. > Compression develops water as a waste product. The water can be removed from the compressed air system. > Piston compressors: the loading rate should not exceed 50-60% > Screw compressors are designed for continuous operation and can withstand loading rates up to % FACTS 18

19 Advice and recommendations Based on the air demand, it is possible to design the optimal solution. Loading rates In order to obtain an optimal dimensioning it is relevant to focus on the loading rate. The loading rate indicates the percentage of the total operating time that the compressor should be fully loaded. A loading rate of 50% means 3 minutes of compression (load) and 3 minutes with no load. This means that the compressor will operate effectively 4 hours a day. Investment in the compressed air installation Service and maintenance COMPRESSED AIR INFO Hydraulics Please contact RENO at Costs related to compressed air The costs of a compressed air installation can be denominated in the following areas: Energy consumption We are always at your disposal with guidance and advice in order to ensure an optimal use of your compressed air system Advice regarding reduction of electricity consumption of air compressors: 1. Make sure to have the correct dimensioning of the compressor and air receiver 2. In case of a varying consumption consider interconnection of several compressors 3. Place the compressor in a room with a low temperature 4. Place the compressor close to the working area 5. Turn the unit off when not in use 6. Review the system for leaks on a regular basis 7. Avoid unnecessarily high pressure in the compressed air system 8. Avoid that the differential pressure of the pressure switch is too low 9. Consider the possibility of heat recycling IMPORTANT! Leakages cost extra: Leakage is the most frequent reason for breakdowns Leakages in compressed air systems Increased spending as a result of leakages, Calculations based on a pressure of 6 bar. SIZES MM L/S KW 1 1 0, , , ,0 19

20 COMPRESSED AIR INFO Advice and recommendations Compressed air qualities acc. iso 8573 Class 1 Classes Particles Water content Residual oil µm - mg/m 3 TDP - g/m 3 * mg/m 3 1 0,1-0, ,003 0, ,15 0, , , x - x +10-9,4 x 7 x - x x x * m 3 is compressed air Recommended fuses Motor 3x V 3x V Fuses Motor Directly Motor Directly (900, 1400 & 2800 RPM) Amp start Star-delta Amp start Star-delta kw HP A A A A A A 0,18 0,24 1, , ,37 0,50 1, , ,41 0,55 1, , ,75 1,0 1, , ,1 1,5 2, , ,2 3,0 5, , ,0 4,0 7, , ,0 5,5 9, , ,5 7,5 11, , ,5 10,0 14, , ,0 15,0 22, , ,0 20,0 28, , ,0 30, , Fuses water content in the air at different pressure dew points (TDP) (100% relative humidity) TDP TDP TDP TDP C g/m 3 C g/m 3 C g/m 3 C g/m , , ,5-24 0, , , , -22 0, , , , , , ,6-28 0, , ,2 8 9,3-30 0, , ,8 6 8,2-32 0, , ,0 5 7,2-34 0, , ,7 4 6,7-36 0, , ,9 3 6,3-38 0, , ,6 2 5,9-40 0, , ,5 0 5,5-42 0, , ,3-2 4,8-44 0, , ,2-4 4,1-46 0, , ,0-8 3,5-48 0, , ,9-12 2,9-52 0, , ,1-14 1,8-54 0, , ,5-16 1,5-56 0, , ,2-18 1,2-58 0, , ,1-19 1,0-60 0, , ,2-20 0,8-70 0,003 20

21 COMPRESSED AIR INFO Compressors RENO provides compressors in all sizes, from single-phase piston compressors for professional use to mobile and stationary screw compressors for the manufacturing industry. The common feature of this wide range of products is our focus on quality. 21

22 COMPRESSED AIR PISTON COMPRESSOERS PISTON COMPRESSORS Single-phase / For hobby use Single-phase compressors oil-free Model 100/5-230 V 100/5-12/24 V Motor (kw/hp) 0,37/0,5 0,5-270 W, 17 A/H. Piston displacem. (l/min.) /100 Free air delivery (l/min.) 50 25/50 Max. pressure (bar) 8 8 Cylinders 1 1 RPM /3000 Receiver (l) 5 5 Portable Yes Yes WxDxH (cm) 40x16x42 40x16x42 Weight (kg) Pressure switch 4014/ /40 Complete air filter Art. no EUR Note: 4016 is for 24/12 volts. Single-phase compressor Model 235/24 Motor (kw/hp) 1,5/2 Piston displacem. (l/min.) 179 Free air delivery (l/min.) 70 Max. pressure (bar) 8 Cylinders 1 RPM 2800 Receiver (l) 24 Portable Yes WxDxH (cm) 60x33x64 Weight (kg) 25 Pressure switch 4014/40 Complete air filter Oil /0,3 ltr. Art. no. HF23524 EUR 189 Note: Hobby. Improved wheels. Single-phase compressor Model 250/10 Motor (kw/hp) 1,5/2 with thermal fuse Piston displacem. (l/min.) 185 Free air delivery (l/min.) 116 Max. pressure (bar) 10 Cylinders 1 RPM 2800 Receiver (l) 10 Portable Yes WxDxH (cm) 39x34x66 Weight (kg) 28 Pressure switch Complete air filter Oil Art. no. HF25010 EUR

23 PISTON COMPRESSORS Single-phase / Construction site Single-phase compressor Model 270/40 Motor (kw/hp) 1,8/2,5 with thermal fuse Piston displacem. (l/min.) 270 Free air delivery (l/min.) 192 Max. pressure (bar) 9 Cylinders 1 RPM 1450 Receiver (l) 36 Portable Yes WxDxH (cm) 73x40x68 Weight (kg) 45 Pressure switch Complete air filter Oil /0,45 ltr. Art. no. PN27040 EUR 590 Cast iron Cylinders. For professional use. Single-phase compressor hand truck model Model 270/25 Motor (kw/hp) 1,8/2,5 with thermal fuse Piston displacem. (l/min.) 270 Free air delivery (l/min.) 192 Max. pressure (bar) 10 Cylinders 1 RPM 1450 Receiver (l) 25 Portable Yes WxDxH (cm) 43x69x79 Weight (kg) 43 Pressure switch Complete air filter Oil /0,45 ltr. Art. no. PN32025-M1 EUR 850 Airless PUR wheels. Cast iron cylinders. COMPRESSED AIR PISTON COMPRESSOERS Single-phase compressor construction site model Model 320/24 Motor (kw/hp) 1,8/2,5 with thermal fuse Piston displacem. (l/min.) 270 Free air delivery (l/min.) 192 Max. pressure (bar) 10 Cylinders 1 RPM 1450 Receiver (l) 24 Portable Yes WxDxH (cm) 86x61,5x69 Weight (kg) 50 Pressure switch Complete air filter Oil /0,45 ltr. Art. no. HN32024-M1 EUR 980 Airless PUR wheels. Cast iron cylinders. 23

24 COMPRESSED AIR PISTON COMPRESSOERS PISTON COMPRESSORS Single-phase / Low noise level / Oil-free Single-phase compressor Silent 40 db(a) Model Silent Air 0,5 Motor (kw/hp) 0,37/0,5 Piston displacem. (l/min.) 50 Free air delivery (l/min.) 38 Max. pressure (bar) 8 Cylinders 1 RPM 2800 Receiver (l) 10 Portable Yes WxDxH (cm) 30x30x40 Weight (kg) 25 Pressure switch 4005-C0340 Complete air filter 4005-C1794 Oil Art. no EUR 820 Dental single-phase compressor Oil-free Silent 56 db(a) Model 160/24 Motor (kw/hp) 1,1/1,5 Piston displacem. (l/min.) 160 Free air delivery (l/min.) 115 Max. pressure (bar) 8 Cylinders 1 RPM 1400 Receiver (l) 24 Portable No WxDxH (cm) 58x50x75 Weight (kg) 55 Pressure switch Desiccant dryer No Art. no. DC160 EUR Silent Silent Dental Single Phase Oil free Desiccant dryer Silent 56 (A) Model 160/24 Motor (kw/hp) 1,1/1,5 Piston displacem. (l/min.) 160 Free air delivery (l/min.) 115 Max. pressure (bar) 8 Cylinders 1 RPM 1400 Receiver (l) 24 Portable No WxDxH (cm) 67x50x75 Weight (kg) 68 Pressure switch Desiccant dryer Yes Art. no. DC160-A EUR Larger models available on request Silent 24

25 PISTON COMPRESSORS Single-phase / Three-phase / Mobile Single-phase compressor Oil-free Model 160/50 Motor (kw/hp) 1,1/1,5 Piston displacem. (l/min.) 160 Free air delivery (l/min.) 115 Max. pressure (bar) 8 Cylinders 1 RPM 1400 Receiver (l) 50 Portable Yes, and stationary WxDxH (cm) 75x35x70 Weight (kg) 40 Pressure switch Art. no. PF16050-OPI EUR 590 Three-phase compressor Model 250/50 250/50 Motor (kw/hp) 1,5/2 1,5/2 Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) Cylinders 2 (cast iron) 2 (cast iron) RPM Receiver (l) Portable Yes Yes WxDxH (cm) 75x40x77 75x40x77 Compressor block no Weight (kg) Pressure switch Complete air filter Oil /0,5 ltr /0,5 ltr. Art. no. (400 volt) PC25050-M4 PC25050-M1 (230 volt) EUR Incl. regulator. COMPRESSED AIR PISTON COMPRESSOERS Three-phase compressor Model 400/90 Motor (kw/hp) 2,2/3 Piston displacem. (l/min.) 385 Free air delivery (l/min.) 270 Max. pressure (bar) 10 Cylinders 2 (cast iron) RPM 890 Receiver (l) 90 Portable Yes WxDxH (cm) 100x42x83 Compressor block no Weight (kg) 95 Pressure switch Complete air filter Oil /1 ltr. Art. no. PC40090 EUR Incl. regulator. 25

26 COMPRESSED AIR PISTON COMPRESSOERS PISTON COMPRESSORS Three-phase / Mobile / Stationary Three-phase compressor Model 500/90 Motor (kw/hp) 3/4 Piston displacem. (l/min.) 500 Free air delivery (l/min.) 380 Max. pressure (bar) 10 Cylinders 2 (cast iron) RPM 980 Receiver (l) 90 Portable Yes WxDxH (cm) 108x45x107 Compressor block no Weight (kg) 90 Pressure switch Complete air filter Oil /1,8 ltr. Art. no. PC50090 EUR Incl. regulator. Three-phase compressor Model 580/90 650/270 Motor (kw/hp) 4/5,5 4/5,5 Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) Cylinders 2 (cast iron) 2 (cast iron) RPM Receiver (l) /2 outlet Portable Yes No WxDxH (cm) 108x45x x52x110 Compressor block no Weight (kg) Pressure switch Complete air filter Oil ,9 ltr /1,8 ltr. Art. no. PC58090 PC EUR Three-phase compressor Model 700/ / /270 Y Motor (kw/hp) 4/5,5 5,5/7,5* 5,5/7,5 Star-delta starting No No Yes Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) Cylinders 2 (cast iron) 2 (cast iron) 2 (cast iron) RPM Receiver (l) /2 outlet 270 1/2 outlet WxDxH (cm) 146x52x x52x x52x124 Compressor block no Weight (kg) Pressure switch Complete air filter Oil /1,4 ltr /1,4 ltr /1,4 ltr. Art. no. PC PC PC S6 EUR With Star-delta starting No No Yes * Minimum recommended fuse size 25 Amps 26

27 PISTON COMPRESSORS Three-phase / Light industry / Stationary / Hydraulic Three-phase compressor 10 bar Model PC960/90+90 Motor (kw/hp) 5,5/7,5* Star-delta starting No Piston displacem. (l/min.) 960 Free air delivery (l/min.) 740 Max. pressure (bar) 10 Cylinders 2 (cast iron) RPM 1150 Receiver (l) /2 outlet Portable No WxDxH (cm) 113x74x96 Compressor block no Weight (kg) 170 Pressure switch Complete air filter Oil /1,4 ltr. Art. no. PC EUR / Star-delta * Minimum recommended fuse size 25 Amps Three-phase compressor 15 bar Model 500/ /150 Motor (kw/hp) 3/4 4/5,5 Star-delta starting No No Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) 15* 15* * Factory preset to 12 bar Cylinders 2 (cast iron) 2 (cast iron) RPM Receiver (l) /2 outlet Portable No No WxDxH (cm) 125x43x x43x110 Compressor block no Weight (kg) Pressure switch Complete air filter Oil /1,8 ltr /1,4 ltr. Art. no. PC PC EUR COMPRESSED AIR PISTON COMPRESSOERS Hydraulic supplementary plant/stationary Model S550 S1050 Motor (kw/hp) 4/5 5,5/7,5 Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) Cylinders 2 2 Verdichte Drehzahl/min Oil Motor Drehzahl./min Oil Flow control l/min Oildruck OilFlow controlregelung Yes No WxDxH (cm) 55x30x45 90x40x60 Compressor block no Weight (kg) Oil Motor Complete air filter Oil /1 ltr /1,45 ltr. Art. no PC1050S EUR

28 COMPRESSED AIR PISTON COMPRESSOERS PISTON COMPRESSORS Stationary / Mobile / Petrol Petrol mobile Model 550/50 550/50 Motor (kw/hp) 3,6/4,8 Honda 3,6/4,8 Honda Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) Cylinders 2 2 RPM Receiver (l) WxDxH (cm) 81x46x83 81x46x83 Compressor block no Weight (kg) Complete air filter Oil /1 ltr /1 ltr. Art. no. PC55050-C3 PC55050-C8 Manuel start Electric start EUR Note: Electrical starting is excl. battery. Supplementary cost for idle air control valve: (will reduce the RPM) Petrol mobile Model 550/32 Motor (kw/hp) 3,6/4,8 Honda Piston displacem. (l/min.) 550 Free air delivery (l/min.) 400 Max. pressure (bar) 10 Cylinders 2 RPM 1400 Receiver (l) 32 (2x16) WxDxH (cm) 81x46x83 Compressor block no Weight (kg) 70 kg Complete air filter Oil /1 ltr. Art. no. PC55032-B8 Electric start EUR Note: Electrical starting is excl. battery. Supplementary cost for idle air control valve: (will reduce the RPM) 2 x 16 l air receiver & installed external 1 x aut. hose reel 1 x exhaust kit Petrol stationary Model 1050/150 Motor (kw/hp) 8/11 Honda Comments El start Piston displacem. (l/min.) 800 Free air delivery (l/min.) 700 Max. pressure (bar) 15* * Factory preset to 12 bar Automatisk Yes Cylinders 2 RPM 1100 Receiver (l) 150 1/2 outlet WxDxH (cm) 126x46x110 Compressor block no Weight (kg) 168 Complete air filter Oil /1,4 ltr. Art. no. PC EUR Note: Electrical starting is excl. battery. Supplementary cost for idle air control valve: Special solution for service vehicles: PC1050 incl. 150 l. extra air receiver art. no

29 Ekstra: Air receiver incl. fittings and connecting hose. Art. no (Horizontal) Art. no /4 (Vertical) With automatic drain PISTON COMPRESSORS Industry Industrial compressors JET & Tornado Model JET-VR-2,5 Tornado S Tornado S Motor (kw/hp) 0,18/0,25 0,9/1,2 (1x220 V.) 1,1/1,5 (3x400 V.) Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) Cylinders RPM Portable No No No Receiver (l) No DB (A) v. M WxDxH (cm) 34x18x26 85x31x68 85x31x68 Weight (kg) Pressure switch No FF31975 FF31975 Filterelement FF71503 FF71506 FF71506 Oil FF40321 FF40321 FF40321 Art. no. FF92304 FF94704 FF94712 EUR Industrial compressors Euros Model 480/90 705/90 Motor (kw/hp) 3/4 4/5,5 Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) Cylinders 2* 2* RPM Receiver (l) Portable Yes Yes WxDxH (cm) 106x40x92 106x40x100 Compressor block no Weight (kg) Pressure switch Complete air filter Oil /0,8 ltr /0,8 ltr. Best nr. Model på hjul IN48090-M IN70590-M Best nr. Stationary** IN48090-S IN70590-S EUR * 100% cast iron. ** Delivered with wheels installed. (Vibration absorbers follows for stationary installation). Industrial compressor Model 830/ /90+90* Motor (kw/hp) 4/5,5 5,5/7,5 Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) Cylinders 2 2 RPM Receiver (l) /2 outlet /2 outlet Portable No No WxDxH (cm) 113x75x96 113x75x96 Compressor block no Weight (kg) Pressure switch Komplet filter Oil /1,0 ltr /1,0 ltr. Art. no. IN IN S4 EUR * Minimum recommended fuse size 25 Amps COMPRESSED AIR PISTON COMPRESSOERS 29

30 COMPRESSED AIR PISTON COMPRESSOERS PISTON COMPRESSORS Stationary / Industry Industrial compressors Sirocco Model 830/ / /500* 970/500 Y Motor (kw/hp) 4/5,5 4/5,5 5,5/7,5* 5,5/7,5 Star-delta starter No No No Yes Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) Cylinders RPM Receiver (l) 270 1/2 outlet outlet outlet outlet WxDxH (cm) 150x52x x60x x60x x60x123 Compressor block no Weight (kg) Pressure switch Complete air filter Oil /1,0 ltr /1,0 ltr /1,0 ltr /1,0 ltr. Art. no. IN IN IN IN S6A EUR % cast iron Compressor block / valves. * NB: IN requires 25 A fuses. Note: IN S6A is incl. star-delta starter. Industrial compressors Bora Model 1240/500 Y 1510/500 Y 1020/500 Y 1290/500 Y Motor (kw/hp) 7,5/10 11/15 7,5/10 11/15 Star-delta starting Yes Yes Yes Yes Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) * 15* Cylinders RPM Receiver (l) outlet outlet outlet outlet WxDxH (cm) 195x67x x67x x67x x67x136 Compressor block no Weight (kg) Pressure switch Complete air filter Oil /2,5 ltr /2,5 ltr /2,5 ltr /2,5 ltr. Art. no. IN IN IN IN EUR % cast iron Compressor block / valves. Incl. star-delta starter. * Factory preset to 12 bar. Industrial compressors Passat Model 545/ /500 Motor (kw/hp) 4/5,5 5,5/7,5 Star-delta starter No No Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) 15* 15* Cylinders 2 2 RPM Receiver (l) 270 1/2 outlet outlet WxDxH (cm) 150x52x x67x136 Compressor block no Weight (kg) Pressure switch Complete air filter Oil /1,0 ltr /1,0 ltr. Art. no. IN IN EUR / % cast iron Compressor block / valves. * Factory preset to 12 bar. 30

31 PISTON COMPRESSORS Industry Base-plate comporssors Model S480 S970 S1240 S1510 Motor (kw/hp) 3/4 5/7,5 7,5/10 11/15 Star-delta starter No Yes Yes Yes Piston displacem. (l/min.) Free air delivery (l/min.) Max. pressure (bar) Cylinders RPM Buffer receiver Yes Yes Yes Yes WxDxH (cm) 82x75x74 82x75x74 100x68x87 100x68x87 Compressor block no Pressure switch Complete air filter Oil Art. no. IN480S-S4 IN970S-S6 IN1240S-S6 IN1510-S6 EUR % cast iron compressor. COMPRESSED AIR PISTON COMPRESSOERS Documented production and operations 31

32 COMPRESSED AIR SCREW COMPRESSOERS SCREW COMPRESSORS Info: Screw compressors are ideal for companies with an extensive need for compressed air. Our series includes models mounted on air receivers incl. refrigerated dryers between 5.5 to 15 kw. The Scroll series is an interesting alternative for the generation of oil-free compressed air. A fixed and an eccentric rotating spiral perform the process of compression without oil. Scroll compressor Oil-free, super silent Model SL-S 2,2 SL-S 3,7 SL-S 4,5 SL-S 5,5 Motor (kw/hp) 2,2/3 3,7/5 4,5/6 5,5/7,5 Free air del. 8/10 bar 238/ / /520 Max. pressure (bar) 8/10 8/ /10 WxDxH (cm) 91x55x92 91x55x92 91x55x92 91x55x92 Weight (kg) EUR Request Request Request Request Available in several variants - also incl. air receiver. Screw compressors Monsun Air BDK Model AIR-BDK2 AIR-BDK3 AIR-BDK4 AIR-BDK5 Motor (kw/hp) 2,2/3 3/4 4/5,5 5,5/7,5 Free air delivery (l/min.) Max. pressure (bar) Receiver (l) WxDxH (cm) 98x77x126 98x77x126 98x77x126 98x77x126 Weight (kg) Lydniveau db(a) Art. no. RCBDK210 RCBDK310 RCBDK410 RCBDK510 EUR With airdryer, electronic control with display, star/delta from 5,5 kw Screw compressors Monsun Air E.P. Economy Model EVO410 EVO510 EVO710 EVO1110 RC1510 Motor (kw/hp) 4/5,5 5,5/7,5 7,5/10 11/15 15/20 Free air delivery (l/min.) Max. pressure (bar) Receiver (l) WxDxH (cm) 148x57x x57x x57x x57x x67x178 Weight (kg) Lydniveau db(a) Art. no. RCEP-EVO410 RCEP-EVO510 RCEP-EVO710 RCEP-EVO1110 RC1510 EUR Screw compressor with frequency control Air delivery (l/min.) at 8 bar Art. no. RCFEP-EVO510 RCFEP-EVO710 RCFEP-EVO1110 RCF1510 EUR Request Request Request Request With airdryer, electronic control with display, star/delta from 5,5 kw 32

33 SCREW COMPRESSORS Screw compressors Monsun Air EVO Model 4/10 5/10 7/10 11/10 Motor (kw/hp) 4/5,5 5,5/7,5 7,5/10 11/15 Free air delivery (l/min.) Max. pressure (bar) WxDxH (cm) 74x56x102 74x56x102 74x56x102 74x56x102 Weight (kg) Art. no. RC EVO410 RC EVO510 RC EVO710 RC EVO1110 EUR Screw compressor with frequency control Air delivery (l/min.) at 8 bar Art. no. RCF EVO510 RCF EVO710 RCF EVO1110 EUR Screw compressors Monsun Air E Model 15/10 18,5/10 22/10 30/10-1 Motor (kw/hp) 15/20 18,5/25 22/30 30/40 Free air delivery (l/min.) Max. pressure (bar) WxDxH (cm) 100x67x x80x x80x x80x130 Weight (kg) Art. no. FF98389 FF98419 FF98449 FF98483 EUR Request Request Request COMPRESSED AIR PISTON COMPRESSOERS Screw compressor with frequency control Air delivery (l/min.) at 8 bar Art. no. FF98381 FF98411 FF98441 FF98471 EUR Request Request Request Request Screw compressors Monsun Air E Model 30/ /10 45/10 55/10 Motor (kw/hp) 30/40 37/50 45/60 55/75 Free air delivery (l/min.) Max. pressure (bar) WxDxH (cm) 140x83x x83x x88x x88x176 Weight (kg) Art. no. RC EVO30210 RC EVO37210 RC EVO4510 RC EVO5510 EUR Request Request Request Request Screw compressor with frequency control Air delivery (l/min.) at 8 bar Art. no. RCF EVO30210 RCF EVO37210 RCF EVO4510 RCF EVO5510 EUR Request Request Request Request 33

34 COMPRESSED AIR TREATMENT COMPRESSED AIR TREATMENT Refrigeration dryers / Desiccant dryers Refrigeration dryers: A refrigerated air dryer removes water from the compressed air down to a predetermined pressure dew point. This is achieved when the hot and humid compressed air enters the refrigerated dryer in which a heat exchanger and a cooling system brings down the air temperature to about 3 C. During the refrigeration the dew point will drop and cause condensation. The condensed water is collected and discharged, while the outgoing cold dry compressed air returns to the air-to-air heat exchanger, where it is reheated by the incoming air in order to prevent condensation in the plant. The refrigerated dryer will normally be installed before the air receiver in order to obtain a dry air receiver. Furthermore, it is essential that the recommended max. temperature for filters and refrigeration dryer is not exceeded at any time. Aftercoolers: The aftercooler is installed after the piston compressor. It ensures that the outlet temperature decreases, in order to ensure that the inlet temperature for the compressed air treatment is not too high. In case of a too high inlet temperature, the life span and efficiency of the filter and refrigeration dryer will decrease. Working pressure bar(g) Correction factor K1 0,71 0,82 0,90 0,96 1,00 1,04 1,07 1,09 1,11 1,13 1,15 1,16 1,18 1,19 Air inlet temperature C Correction factor K2 1,23 1,00 0,81 0,66 0,57 0,52 0,48 0,44 0,40 Ambient temperature C Correction factor K3 1,05 1,00 0,95 0,89 0,84 0,78 0,72 Pressure dew point Correction factor K4 1,00 1,12 1,24 1,38 Flow capacity: l/min at 7. bar Air inlet temperature: 34 Ambient temperatuer: 25 To obtain the required air flow multiply the correction factors from the chart flowcapacity (l/min.) = k1 x k2 x k3 x k4 Refrigeration dryers Model DEiT 007 DEiT 012 DEiT 018 Capacity (l/min) Max. pressure (bar) Air connection 3/8 1/2 1 WxDxH (cm) 32x30x39 36x30x42 36x30x42 Art. no. DEiT007 DEiT012 DEiT018 EUR For industrial use. Outlet in the back. Refrigeration dryers Model DEiT 026 DEiT 032 DEiT 040 Capacity (l/min) Max. pressure (bar) Air connection WxDxH (cm) 38x52x63 38x52x63 68x52x86 Art. no. DEIT026 DEIT032 DEIT040 EUR For industrial use. Refrigeration dryers Model DEiT 050 DEiT 060 DEiT 080 DEiT 101 Capacity (l/min) Max. pressure (bar) Air connection 1 1/2 1 1/2 1 1/2 2 WxDxH (cm) 68x52x86 68x52x86 76x56x100 89x73x111 Art. no. DEiT050 DEiT060 DEiT080 DEiT101 EUR Request Request Request Request For industrial use. Larger models available upon request. Desiccant dryers Model DAS4 DAS5 DAS6 DAS7 Capacity (l/min) Air connection 3/8 3/8 3/8 3/8 Art. no. DAS4 DAS5 DAS6 DAS7 EUR Request Request Request Request 34

35 COMPRESSED AIR TREATMENT Separators / Cyclones / Filters Cyclones Model 1/2, 600 l/min. WS010CBFX 260 3/4, 2400 l/min. WS020DBFX 330 With automatic drain Oil and water separators Model 1,2 m 3 /min ES2100 Request 3,5 m 3 /min ES2150 Request COMPRESSED AIR TREATMENT Pre-filters / Domnick Hunter (AO) Filter element Connection Flow (l/min.) 1/2 RG 600 AO010CBFX A /2 RG 1200 AO015CBFX A /4 RG 1800 AO020DBFX A RG 3600 AO025EBFX A0 350 Removes particles down to 1 micron and oil aerosols down to a max. residual content of 0.6 mg./m 3. Used for the protection of refrigerated dryers etc. Incl. automatic drain. High efficiency filters / Domnick Hunter (AA) Filter element Connection Flow (l/min.) 1/2 RG 600 AA010CBFX AA 110 1/2 RG 1200 AA015CBFX AA 175 3/4 RG 1800 AA020DBFX AA RG 3600 AA 025EBFX AA 350 Removes particles down to 0.01 micron and oil aerosols down to a max. residual content of 0.01 mg./m 3. Incl. auto drain. Pre-filters (P) Filter element Connection Flow (l/min.) 1/ HFN-018P 350 P / HFN-030P 475 P High efficiency filters (S) Filter element Connection Flow (l/min.) 1/ HFN-018S 350 S / HFN-030S 475 S Silica Filter Silica gel/absorbent Connection Flow (l/min.) 3/4 (1/4 ) 425 FF FF kg 125 Excl. Gel/Absorb. For 2 fillings The filter absorbs condensation in the air. Used for tasks with smaller air consumption. 35

36 COMPRESSED AIR TREATMENT COMPRESSED AIR TREATMENT Booster / Respiratory Protection / Air-saver / Accessories Combination filters / Respiratory protection Domnick Hunter Connection 1/4 3/8 Capacity (l/min) Art. no. AC010ABFIGV AC015BBFIGV EUR Incl. automatic float drain, wall fitting, regulator and manifold. Excl. quick coupling. Pressure increaser (Booster) Model Increaser Capacity (l/min) 230 Inlet 1-10 Outlet pressure 2-20 (Pressure ratio max. 1:2) WxDxH (mm) 180x130x110 Art. no. FF64710 EUR 750 Increases the pressure on the main network. Used where a higher operating pressure is sporadically needed. Air-Saver Model 1 2 Capacity (l/min) 30 sec. open/close 115 sec. open/close Max. pressure (bar) Art. no EUR Up to 7 day programmable open and close function. 230V. Extractors Oil extractors Accessory kit Accessory kit Cleaning guns Cleaning gun Cleaning gun, JWL (3) (4) Blow guns Blow gun, Airboy Blow gun 50 cm Blow gun 100 cm Inflation for tyres (bike valve) (3) Infaltion for tyres (4) (5) Pump rods and nipples Pump rod, bike/car Pump rod, twin wheels Nipple, bike Nipple, car Nipple for 4420 (5) Air inflators with pressure gauge Prof. w/ hose Prof. w/ 5m hose Prof. w/ hose and rod Standard w/ hose Body gun Body gun Air inflator Prof. air inflator PCL

37 Vertical air receivers 90 l. 11 bar oceanblue / l. 11 bar galvanized l. 11 bar galvanized l. 11 bar oceanblue / l. 11 bar galvanized l. 11 bar galvanized l. 15 bar galvanized Fittings set 90 l. 11 bar /2 85 Fittings set 270 l. 11 bar /1 85 Fittings set 500 l. 11 bar /1 85 Fittings set 900 l. 11 bar /1 85 Fittings set 500 l. 15 bar /1 85 Horizontal air receivers 50 l. 11 bar white l. 11 bar white l.11 bar oceanblue st l. 11 bar oceanblue / l. 11 bar white / l. 11 bar oceanblue / l. 15 bar white / l. 15 bar oceanblue / l. 15 bar oceanblue / Fittings set see above Battery incl. 90 liter air receiver 2 x 90 l. 11 bar oceanblue Incl. safety valves, pressure gauge, taps and plugs. ACCESSORIES Condensation taps / Air receivers / Valves Safety valves CE approval 1/4 6 bar CE FF /4 8,5 bar /4 11 bar CE /1 15 3/8 8 bar CE FF /8 9,5 bar CE FF /8 10 bar CE /8 10,5 bar CE FF /8 11 bar CE /8 12 bar CE FF /8 15 bar CE /8 16 bar CE /2 10 bar CE FF /2 10,5 bar CE FF /2 11 bar CE /2 15,5 bar CE FF Pilot valves For relieving of valve Unloading valves 1/8 for single phase /8 for single phase Non return valves 3/ /2 w/ 15 mm bicone / Non return valve - kit Kit 1/ K 13 Kit 3/ K 17 COMPRESSED AIR ACCESSORIES Battery incl. 90 liter receiver 4 x 90 l. 11 bar oceanblue Incl. safety valves, pressure gauge, taps and plugs. Condensation tap for receiver Auto. water tap. Leads the HDF120A 130 water out automatically. For vertical air receiver. Condensation tap for receiver Auto. water tap (220 V) incl timer, filters and nipples For consol installation For horizontal air receiver. Ball valves 3/8 Ball valve /2 Ball valve /4 Ball valve /8 Balofix /4 Balofix /2 Balofix Drain cocks 1/ / / /2 kit for consol installation Vibration absorbers Ø50 x 30 mm with 1 bolt Ø50 x 40 mm with 2 bolts Ø75 x 40 mm with 1 bolt Coupling hoses and nipples Hose 1/2, 1,5 m Hose 3/4, 1,0 m Hose 1, 1,0 m Nipple 1/ Nipple 3/ Nipple

38 COMPRESSED AIR ACCESSORIES 38 ACCESSORIES Compressor blocks / Electric motors / Valves / Gaskets / Filters Compressor blocks industry SV l. 4 kw SV l kw HW l kw HW l kw Compressor blocks K l. 1,5 kw K l. 3,0 kw K l. 4,0 kw K l. 5,5 kw K l. 5,5 kw K l. 7,5 kw K l. head unloaded K l. head unloaded K l. head unloaded K l. head unloaded K l. head unloaded K l. head unloaded Set of gaskets Set of gaskets for SV203 V Set of gaskets for HV Set of gaskets for HW Set of gaskets for K Set of gaskets for K Set of gaskets for K Set of gaskets for K Set of gaskets for K Set of gaskets for K Set of gaskets for K Cylinder head gaskets FF KAY FF Set of cylinder head gaskets FF for JET (KX) & Tornado (KL) Set of valves Set of valves for SV203/SV Set of valves for HV Set of valves for HW Set of valves for K Set of valves for K Set of valves for K25 + K Set of valves for K Set of valves for K Set of valves for FF KAY FF Valves for JET(KX) TOR(KL) FF Electric motors RPM 3,0 HP/2,2 kw ,0 HP/3,0 kw ,5 HP/4,0 kw ,5 HP/5,5 kw Compressor oil Full synth. ISO 68 (Single Ph.) Full synth. ISO 150 (Three Ph.) Klüber ISO (For industry/ring valves) Screw Compressor oil ISO Compressor oil for Silentair Pneumatik oil Cube 11-1 l Klüber FG oil ISO l Screw Compressor FG oil Pressure switch Excl. motor protec., 220 V, 3 outl Excl. motor protec., 3 outlets Incl. motor pro., 4-6 amp Incl. motor pro., 6,3-10 amp Incl. motor pro., amp Condor pressure monitor MDR 3 3/8 for PS25050/0100 Condor pressure monitor MDR 3 3/8 for PS Relief valve w/ olive FF Nippel 1/2 x 1/ CEE plug CEE-plug 16A Power supply CEE-plug 16A CEE-plug m/polarity inverter 6A CEE-plug 32A Power supply CEE-plug 32A Pressure gauges 1/ bar / bar, w/ glycerin / bar / bar Ø / bar, w/ glycerin For air inflator, thread (side) For air inflator, thread (rear) 4421/1 12 Air filter for K25 K100 Air filter - complete K25 - K Filter element K25 - K Intake filters Air filter - complete Filter element Intake filters 3/8 plastic /2 plastic /8 metal /2 metal /4 metal Filter element for art. no FF air filters Air filter - complete Filter element - FF Desert air filters RENO desert filter Flange for desert filter Socket /1 7 RENO filter element Solenoid valves 1/4 NC 1 x /2 2-ways. NO 1x /8 3-ways. NO 1 x

39 Air hose m hose w/claw coupling Air hoses 1/4 rubber hose, 10 m /8 rubber w/coupling 10m Air hoses prof. / JWL coupling 3/8, 10 m. w/coupling PUR /8, 15 m. w/coupling PUR /8, 20 m. w/coupling PUR ACCESSORIES Hoses / Hose reels Hose reel steel, automatic Incl. 10 m 1/4 18 bar PUR hose Hose reel - steel, automatic Incl. 15 m PUR hose, 1/ Incl. 12 m PUR hose, 3/ COMPRESSED AIR ACCESSORIES Air hoses (per meter) 1/4, plastic /8, plastic ,5 1/2, plastic /8, plastic ,5 Hose reel steel, automatic Incl. 20 m PUR hose, 3/ Air hoses (per meter) 1/4, rubber ,5 3/8, rubber /2, rubber /8, hose for breathing air Recoil hoses PUR 1/4, 2 m /4, 4 m /4, 6 m /4, 8 m Hose reel automatic Incl. 25 m (10x19 mm) rubber hose 3/8 Incl. 25 m (10x14mm) PUR hose 3/8 Incl. 25 m (13x18mm) PUR hose 1/2 Hose reel stand for shop exhibitions Hose reel stand without hose reel Hose reel incl. PUR hose Incl. 8 m. 3/8 PUR hose Incl. 20 m 1/2 PUR hose Revolving arm for 5472, /1 25 Hose reel Incl. 30 m. 1/4 PUR hose

40 COMPRESSED AIR ACCESSORIES ACCESSORIES Fittings Hose clips 11 mm ,5 13 mm ,5 15 mm ,5 18 mm ,5 Ball nipples 1/4 female /4 male Hose stubs 1/4 x 1/ ,5 1/4 x 3/ ,5 1/4 x 1/ ,5 3/8 x 1/ ,5 1/2 x 1/ ,5 3/8 x 3/ Pack.: B+art.no. Hose connectors 1/ / / For blister pack.: B+art.no. Quick couplings female 1/ ,5 3/ ,5 1/ ,5 Quick couplings male 1/ ,5 3/ ,5 1/ ,5 Quick couplings with hose union 1/ ,5 5/ ,5 3/ ,5 1/ ,5 Y-connections 1/ / /4 3 x female Nipple sockets 1/4 x 1/ /8 x 1/ /2 x 1/ /2 x 3/ /4 x 1/ /4 x 3/ Hexagon nipples 1/ ,5 1/ ,5 3/ /4 x 1/ /8 x 1/ ,5 1/2 x 3/ /4 x 3/ /2 x 1/ Nipples female/male 1/4 female ,5 1/4 male ,5 3/8 female ,5 3/8 male ,5 1/2 female /2 male Nipples for hoses 1/ ,5 5/ ,5 3/ ,5 1/ Safety couplings Euro 7,2 mm 1/4 safety coupling CP01E /8 safety coupling CP01E /2 safety coupling CP01E Safety couplings w/ hose connector 1/4 safety coupling CP21E /8 safety coupling CP21E /2 safety coupling CP21E Safety couplings female 1/4 safety coupling CP14E /8 safety coupling CP14E /2 safety coupling CP14E

41 Tees male/female 1/4 Tees - female /8 Tees - female RA /2 Tees - female RA /4 Tees - male Pressure regulator 1/4 w/pressure gauge (excl. couplings), right turn 1/4 w/pressure gauge 4370/1 23 (excl. couplings), left turn Filter/pressure regulator 1/4 Filter/pressure regulator 1/ Regulator 1/ filter/lubricator Lubricator 1/ ACCESSORIES Fittings / Air preparation / Air accessories Elbow 1/ /8 female x 3/8 male Mini lubricator 1/4 oiler Push in fittings 1/4 x Ø6 mm, straight PC0602G 4 1/4 x Ø8 mm, straight PC0802G 5 1/4 x Ø10 mm, straight PC1002G 6 1/4 x Ø12 mm, straight coupler PC1202G 6 Push in fittings Ø6 mm PUC06 4 Ø8 mm PUC08 4 Ø10 mm PUC10 5 Ø12 mm PUC12 5 COMPRESSED AIR ACCESSORIES Knocks filter/pressure regulator 1/2 Filter /Pressure regulator C33BMAN 121 Filter 1/2 F33BMAN 101 Lubricator 1/2 L33B 86 Reduction valve 1/2 R33 62 Kit KP33 5 Wall fittings ZW331 9 Pressure gauge, Ø 50 G50610R 13 Pneumatic oil, Cube 11, 1 l Filter - auto., water F33AM Filter/reg. 1/2 -auto., water C33AM Push in fittings 2xØ6 mm, elbow PUL06 4 2xØ8 mm, elbow PUL08 4 2xØ10 mm, elbow PUL10 5 2xØ12 mm, elbow PUL12 5 PU hoses 25 m Hose PU, Ø6 - neutral Hose PU, Ø8 - neutral Hose PU, Ø10 - neutral Hose PU, Ø12 - neutral Knocks filter/pressure regulator 1 Filter/pressure regulator C55BMAN 262 Filter 1 F55BMAN 200 Lubricator 1 L55B 180 Reduction valve 1 R Kit KP55 10 Wall fittings ZW55 18 Pressure gauge, Ø 63 G63610R 13 Sandblaster professional Sandblaster, 1 l. bottle Sandblaster incl. hose (prof. 450 l) and safety mask Sandblaster (dust free, sand recycling) Paint spray gun Paint gun Paint gun, prof

42 COMPRESSED AIR INFO Recommended loading rate for air Compressors FACTS 230 Volt 400 Volt 400 Volt 400 Volt 400 Volt Type of compressor Piston compressor Piston compressor Piston compressor Screw Compressor Screw Compressor Semi-professionel Professional Light industry Industry Industry (Receiver mouted) Loading rate 10-20% 40-50% 50-60% % % Design of the ,0-2,5 1,7-2,0 1,1-1,3 1,0-1,1 installation x the need x the need x the need x the need x the need Recommended max. 1 Hour 4-6 Hours 6-8 Hours Hours 24 Hours operation per day (one-shift operation) (two-shift operation) Optimization of the compressed air quality example of compressed air treatment using cyclones, dryers and filters Cyklone Prefilter Dryer High efficiency filter Active carbon filter Water AO/P 0,5 mg/m 3 AA/S 0,01 mg/m 3 ACS 0,003 mg/m 3 Large Particles (1 mikron) Water/Moisture Small partciles/oil residues Oddor/Taste/Oil vapor (0,01 mikron) (0,003 mikron) 42

43 Aalborg Egå Thyregod Gadstrup Attention All prices are EXW. Technical data and prices are indicatives and subject to changes without notices. 43

44 Tel: RENO a leading manufacturer and supplier of quality solutions...