Sink Bowls & Accessories
|
|
|
- Rafe Lamb
- 5 years ago
- Views:
Transcription
1 SOLUTIONS FOR TRADE Sink Bowls & Accessories November 2017
2 SOLUTIONS FOR TRADE CONTENTS Page 3 4 Page 5 Page 6 Page 7 8 Page 9-14 Page 15 Page Page Page 22 CRH Series Fabricated Bowls CRH Series Knee Operated Sinks Cleaners Sinks Hand Basins Pressed Bowls Ice Wells Plug & Wastes Dry Basket Arrestors In-Floor Dry Basket Arrestors
3 CRH Series Fabricated Bowls 3 Fabricated Bowl Centre Punched Waste SIZES (W X W X D) SBF302520C SBF303020C SBF303025C SBF353020C SBF353030C SBF353520C SBF353525C SBF403020C SBF403025C SBF403030C SBF403520C SBF403530C SBF404025C SBF404030C SBF453030C SBF453530C SBF454030C SBF454525C SBF454530C SBF504030C SBF505030C SBF554530C 300mm x 250mm x 200mm 300mm x 300mm x 200mm 300mm x 300mm x 250mm 350mm x 300mm x 200mm 350mm x 300mm x 300mm 350mm x 350mm x 200mm 350mm x 350mm x 250mm 400mm x 300mm x 200mm 400mm x 300mm x 250mm 400mm x 300mm x 300mm 400mm x 350mm x 200mm 400mm x 350mm x 300mm 400mm x 400mm x 250mm 400mm x 400mm x 300mm 450mm x 300mm x 300mm 450mm x 350mm x 300mm 450mm x 400mm x 300mm 450mm x 450mm x 250mm 450mm x 450mm x 300mm 500mm x 400mm x 300mm 500mm x 500mm x 300mm 550mm x 450mm x 300mm Fabricated bowl. Centre Punched 90mm Waste Constructed from 1.2mm 304 grade stainless steel. Polished finished no mm hole can be punched on request. Custom sizes manufactured on request.
4 CRH Series Fabricated Bowls 4 Fabricated Bowl Offset Punched Waste SBF454525F SBF454530F SBF504530F SBF505030F SBF554530F SBF555030F SBF604530F SBF605030F SBF805030F SIZES (W X W X D) 450mm x 450mm x 250mm 450mm x 450mm x 300mm 500mm x 450mm x 300mm 500mm x 500mm x 300mm 550mm x 450mm x 300mm 550mm x 500mm x 300mm 600mm x 450mm x 300mm 600mm x 500mm x 300mm 800mm x 500mm x 300mm Fabricated bowl. Offset Punched 90mm Waste Constructed from 1.2mm 304 grade stainless steel. Polished finished no mm hole can be punched on request. Custom sizes manufactured on request.
5 CRH Series Knee Operated Sinks 5 ASKOB1 ASKOB2 Knee operated sink without temping valve. Hands free, knee operation. Large front panel 420mm x 150mm. Automatic water shutoff. Outside dimensions 521mm x 408mm x 200mm deep. Constructed from 304 stainless steel. Body and shroud material thickness 1.2mm Sink material thickness 0.9mm Polished finish. 40mm drain. 5 Star WELS rating and AS/NZS 6400:2005 compliant. Waterflow 6 litres per minute. Automatic water shut-off after 7 seconds. Sink capacity: 10 Litres. Knee operated sink with temping valve. Hands free, knee operation. Large front panel 420mm x 150mm. Automatic water shutoff. Outside dimensions 521mm x 408mm x 200mm deep. Constructed from 304 stainless steel. Body and shroud material thickness 1.2mm Sink material thickness 0.9mm Polished finish. 40mm drain. 5 Star WELS rating and AS/NZS 6400:2005 compliant. Waterflow 6 litres per minute. Automatic water shut-off after 7 seconds. Sink capacity: 10 Litres.
6 Cleaners Sink 6 Mop Sink Floor and Wall Mounted (1.2mm) Mop Sink with Large Flange 304P-MOP MOPSINK Cleaners Sink with heavy duty Hinged Grate, wall mounting brackets and legs with adjustable feet to support a 45L Capacity, overall Bowl dimensions 530mm x 470mm x 226mm. 1.2mm Polished 304 Stainless Steel. Ideal for use in hospitals, schools and anywhere janitorial duties are performed regularly Mop Sink with Large Flange, 520mm x 420mm x 240mm
7 Hand Basins 7 Hand Basin 360mm x 355mm x 110mm Hand Basin 350mm x 350mm x 110mm WB3 Round basin with round bowl and rear upstand. Outside dimensions: 360mm width x 355mm length x 110mm deep. Material thickness: 0.9mm Constructed from 304 grade stainless steel. Polished finish. 40mm drain hole. Capacity: 4 Litres. WB5 Square corner basin with round bowl, round front and upstand on two sides. Outside dimensions: 350mm width x 350mm length x 110mm deep. Material thickness: 0.9mm Constructed from 304 grade stainless steel. Polished finish. 40mm drain hole. Capacity: 4 Litres.
8 Hand Basins 8 Basin Brackets Rectangular Wall Mount Hand Basin, 500mm x 400mm x 145mm A B A BABR Basin bracket to suit WB6 hand basin B WABR Waste bracket to suit WB2, WB3, WB5, RB1 and RB2. 304P-WB6 Rectangular Wall Mount Hand Basin, 500mm x 400mm x 145mm, 11.5L Capacity, with Wall Brackets. The 304 Precision range of Basins are made from quality #304 Stainless Steel. These wall basins are extremely robust and hard wearing. This range complies with local authority food preparation requirements. Perfectly suited for schools, portable buildings, temporary building sites and factories.
9 Pressed Bowls 9 Pressed Bowl 380mm x 320mm x 150mm Pressed Bowl 306mm x 306mm x 160mm B1 Pressed Bowl. Size: 380mm x 320mm x 150mm Material thickness: 0.9mm Constructed from 304 grade stainless steel. 15mm polished flange. 50mm drain hole. Capacity: 12 Litres. B2 Pressed Bowl. Size: 306mm x 306mm x 160mm Material thickness: 0.9mm Constructed from 304 grade stainless steel. 15mm polished flange. 50mm drain hole. Capacity: 12 Litres.
10 Pressed Bowls 10 Pressed Bowl 406mm x 360mm x 180mm Pressed Bowl 460mm x 306mm x 160mm B3 Pressed Bowl. Size: 406mm x 360mm x 180mm Material thickness: 0.9mm Constructed from 304 grade stainless steel. 15mm polished flange. 50mm drain hole. Capacity: 20 Litres. B4 Pressed Bowl. Size: 460mm x 306mm x 160mm Material thickness: 0.9mm Constructed from 304 grade stainless steel. 15mm polished flange. 50mm drain hole. Capacity: 20 Litres.
11 Pressed Bowls 11 Pressed Bowl 558mm x 360mm x 189mm Pressed Bowl 610mm x 463mm x 300mm B6 Pressed Bowl. Size: 558mm x 360mm x 189mm Material thickness: 0.9mm Constructed from 304 grade stainless steel. 15mm polished flange. 50mm drain hole. Capacity: 31 Litres. B7 Pressed Bowl. Size: 610mm x 463mm x 300mm Material thickness: 1.2mm Constructed from 304 grade stainless steel. 25mm polished flange. 50mm drain hole. Capacity: 75 Litres.
12 Pressed Bowls 12 Pressed Bowl 356mm x 253mm x 125mm Pressed Bowl 282mm x 225mm x 121mm B8 Pressed Bowl. Size: 356mm x 253mm x 125mm Material thickness: 0.9mm Constructed from 304 grade stainless steel. 15mm polished flange. 50mm drain hole. Capacity: 9 Litres. B10 Pressed Bowl. Size: 282mm x 225mm x 121mm Material thickness: 0.9mm Constructed from 304 grade stainless steel. 15mm polished flange. 50mm drain hole. Capacity: 5.5 Litres.
13 Pressed Bowls 13 Round Pressed Bowl 280mm Diameter RB1 Round pressed bowl with 25mm flange. Inside dimensions: 280mm diameter x 115mm deep. Material thickness: 0.9mm Constructed from 304 grade stainless steel. Polished finish. 40mm drain hole. Capacity: 4.5 Litres.
14 Pressed Bowls 14 Round Pressed Bowl 280mm Diameter RB2 RB3 Round pressed bowl with 25mm flange. Inside dimensions: 330mm diameter x 115mm deep. Material thickness: 0.9mm Constructed from 304 grade stainless steel. Polished finish. 40mm drain hole. Capacity: 7 Litres. Round pressed bowl with 25mm flange. Inside dimensions: 310mm diameter x 150mm deep. Material thickness: 0.9mm Constructed from 304 grade stainless steel. Polished finish. 40mm drain hole. Capacity: 7 Litres.
15 Pressed Bowls 15 Rectangular Hand Basin, 520 x 400 x 145mm WB6 Rectangular Wall Mount Hand Basin, 520 x 400mm, Bowl 440 x 280 x 145mm
16 Pressed Bowls 16 Square Wall Mounted Hand Basin, 360 x 360 x 115mm 304P-WB2 Square Wall Mounted Hand Basin, 360mm x 360mm x 115mm, Basins are made from quality #304 Stainless Steel. These wall basins are extremely robust and hard wearing. This range complies with local authority food preparation requirements. Perfectly suited for schools, portable buildings, commercial kitchens and factories.
17 Pressed Bowls 17 Square Hand Basin, 360 x 360 x 110mm WB2 Square Wall Mount Hand Basin, 360 x 360mm, Bowl 280 Diam x 110mm
18 Pressed Bowls 18 Corner Mount Hand Basin, 360 x 360 x 125mm 304P-WB5 Corner Mount Hand Basin, 360mm x 360mm x 125mm, Basins are made from quality #304 Stainless Steel. These wall basins are extremely robust and hard wearing. This range complies with local authority food preparation requirements. Perfectly suited for schools, portable buildings, commercial kitchens and factories.
19 Pressed Bowls 19 S/S Sink Bowl, Custom Made SPEC-SSB CRH can supply 304 or 316 grade stainless steel fabricated sink bowls to your specifications. Simply let us know these details: - Overall Length x Width x Depth or 316 Stainless Steel Material - Offset or Centre Waste Hole punched - Waste Hole size, 50mm for a standard fitting or 90mm for Dry Basket Arrestors or Strainer Wastes. We will come back to you with your price and an estimated dispatch lead time (generally 7-10 working days).
20 Ice Wells 20 CRH Ice Well ICE Ice Well, 485mm x 435mm x 300mm. Centre Punched. 304 Grade Stainless Steel Inner Bowl, Outer Skin & Fixing Brackets Polyurethane Foam Insulation between the outer skin and inner bowl Designed so it may be either welded or dropped into bench top 2 x side brackets are provided to give stronger installed strength Bottom slotted ice tray to prevent ice sitting in water 25mm drain hole so excess water drains away to preserve ice
21 Plug & Wastes 21 Plug & Waste-40mm Plug & Waste-50mm 40STD 40mm Plug & Waste. Manufactured from glass reinforced polypropylene with a stainless steel face. 50BWA Plug and waste. Polypropylene and 304 stainless steel waste with stainless steel plug and scrap trap. Fits 89mm sink hole and attaches to standard 50mm pipe.
22 Plug & Wastes 22 Plug & Waste-50mm Plug & Waste-89mm 50PGR 50mm Plug & Waste. Manafactured from glass reinforced polypropylene with a stainless steel face. PW89/50 Plug and waste. Fits 89mm sink hole and attaches to standard 50mm pipe. Made in accordance with Australian Standard AS2887. Manufactured from glass reinforced polypropylene with a 304 stainless steel face. SAI approved to MP52-SPEC mm sink hole and attaches to standard 50mm pipe.
23 Plug & Wastes 23 Kason Twist Drain Stainless Steel Flat Strainer to Suit WD20T K Kason Twist Waste Drain. Designed to fit an 89mm waste hole. Fits a standard 50mm pipe fitting. 72-FS Stainless steel flat strainer to suit WD20T.
24 Plug & Wastes 24 Replacement Kit for WD20T 50mm x 40mm Waste Reducer 72-RK Replacement kit for WD20T, includes flange rubber washer and paper gasket, body bushing, packing nut bushing and plug O-ring. 5040M 50mm x 40mm Waste Reducer
25 Plug & Wastes 25 Nickel plated brass Sink Drain S/S Overflow Tube 11/2 x 10 E A Nickel plated brass Sink Drain 1 x1 1/2 locknut & washer. E Suits K Overflow Tube as seen in related records. S/S Overflow Tube, 1 1/2 X 10 E A Sink Drain Brass 1 X 4 C/W
26 Plug & Wastes 26 Overflow Tube, 1 1/2 x 10 Overflow Tube, 1 K Kason 1-1/2 x 10 Overflow Tube K Overflow Tube For 1 Drain, Length 229mm
27 Dry Basket Arrestors 27 Sink - Shield 2 Sink-Shield Large Sink-Shield 2 is a sink outlet fitting that screens and retains solid waste from waste water in a basket. The basket is removed and emptied when full. A secondary screening plate is fixed securely under the basket to prevent the discharge of solid waste in the event of the basket not being replaced. The basket is simple to lift out and dropped back in as required. This product has an 89 mm diameter body that fits a standard 90 mm sink outlet. Basket Size: 450 cc Sink-Shield Large is a sink outlet fitting that screens and retains solid waste from waste water in a basket. The basket is removed and emptied when full. A secondary screening plate is fixed securely under the basket to prevent the discharge of solid waste in the event of the basket not being replaced. The basket is simple to lift out and dropped back in as required. This product has a 124 mm diameter body that requires a 125 mm sink outlet. Basket Size: 1100 cc
28 Dry Basket Arrestors 28 Sink-Safe 2 Sink-Safe Large Sink-Safe 2 is a sink outlet fitting that screens and retains solid waste from waste water in a basket. The basket is removed and emptied when full. A secondary screening plate is fixed securely under the basket to prevent the discharge of solid waste in the event of the basket not being replaced. The basket is simple to lift out and dropped back in as required. This product has an 89 mm diameter body that fits a standard 90 mm sink outlet. This model has a factory fitted release valve. The valve is activated by an extended handle and allows the user to open the sink outlet (and allow the sink contents be discharged through the basket) without having to place their hands in the water. This is a significant health and safety feature for all commercial kitchens. Basket Size: 340 cc Sink-Safe Large is a sink outlet fitting that screens and retains solid waste from waste water in a basket. The basket is removed and emptied when full. A secondary screening plate is fixed securely under the basket to prevent the discharge of solid waste in the event of the basket not being replaced. The basket is simple to lift out and dropped back in as required. This product has a 124 mm diameter body that fits 125 mm sink outlet. This model has a factory fitted release valve. The valve is activated by an extended handle and allows the user to open the sink outlet (and allow the sink contents be discharged through the basket) without having to place their hands in the water. This is a significant health and safety feature for all commercial kitchens. Basket Size: 850 cc
29 In-Floor Dry Basket Arrestors 29 Drain-Guard Drain-Guard is a floor waste outlet fitting that has a 150 mm x 150 mm housing and re-moveable basket. The basket is simply dropped in or lifted out. To prevent any discharge of solid waste when the basket is removed a secondary screening plate is securely fixed below the basket. This product has a 98 mm diameter body that fits into (nominal) 100 mm pipes.
30 In-Floor Dry Basket Arrestors 30 Round Vinyl Floor Waste With Basket Trap DI4SO6VX - The first floor waste arrestor to meet WSAA product specification requirements WSA PS 841 Floor Waste Arrestor - All Ni-Bz wastes carry the Standards Mark AS 1589 (Licence SMK02448) - Complies with AS/NZS 3966 Class B and EN1253 Class Cload rating - Complies to AS/NZS 4994:1998 Discharge of Commercial
31 SOLUTIONS FOR TRADE 1 Nelson Street, Moorabbin VIC 3189 AUSTRALIA Tel: Fax:
Plumbing Products & Tapware
www.crh.com.au Solutions For TRADE Plumbing Products & Tapware www.crh.com.au Solutions For TRADE Contents Page 3 5 Page 6 8 Page 9 12 Page 13 14 Page 15 17 Page 18 Page 19 22 Page 23 Page 24 Page 25 26
Type A. Part # Description
SHOWER DRAIN ASSEMBLIES MISCELLANEOUS REPLACEMENT GRATES 40800557 40800558 40800373, 40800374 48000341 FOR CERAMIC TILE 40800557 2 x 3 Bolt-down shower drain FOR MARBLE OR FIBERGLASS 40800558 Floor grate
FAUCET PARTS - EXPLODED VIEW Model: K-59
FAUCET PARTS - EXPLODED VIEW Model: K-59 Swivel Gooseneck Spout 55/64-27 Male Thread OPTIONAL Low-Flow Aerator.5 GPM K-08 Aerator 2 GPM Flow "O" Rings { Back Plate Washer Nut Body NOTE: Hot Stem is LEFT
DUKE UNIVERSITY CONSTRUCTION STANDARDS
1 22 40 00 Plumbing Fixtures 1. General A. Definitions 1. Section includes a. Water closets and urinals b. Lavatories, sinks, and service sinks c. Electric water coolers, drinking fountains, d. Showers
Installation Guide. Install your new sink with step-by-step instructions.
Installation Guide Install your new sink with step-by-step instructions. Installation Guide Bath Sinks Drop-In Undermount Dual Flex Vessel Drains Bathtubs Freestanding Overflow and Waste Kit Rough-In Kit
24 (610mm) 24 (610mm) 24 (610mm) (51mm) 6 (150mm)
Features Free standing wood pedestal with tempered glass or X-Stone solid surface countertop vanity. Cabinet base: Wood pedestal. 30-5/1(770mm)H x D x W Furniture grade plywood layered with solid wood
Cascade TAPWARE SHOWERS ACCESSORIES
Cascade TAPWARE SHOWERS ACCESSORIES Cascade by Faucet Strommen A quality from within The Classic lines It s the subtle curves and perfect proportions that inspire you with Cascade. The classic feel and
inset vanity basin ideal for use with vanity units easy to clean to specify/order: inset wash bowl taps & mixers material colour
Stainless Steel 410 SEPTEMBER 2013 STAINLESS STEEL 11:1:411 inset vanity basin ideal for use with vanity units easy to clean Inset washbowl 360mm inset wash bowl 360mm diameter, no tap holes, no overflow
PRODUCT SPECIFICATION GUIDE
TM PRODUCT SPECIFICATION GUIDE CONTENTS Intro 04 SECTION 1.0 TAPWARE 05 1.1 BUBBLERS Wolfen 122 Wall Bubbler 06 Wolfen 90 Wall Bubbler 08 Wolfen Hob Bubbler 10 Wolfen Remote Button Bubbler 12 1.2 FOOT
MODULAR STAINLESS STEEL & BESPOKE SOLUTIONS BUYERS GUIDE 2017
BUYERS GUIDE 2017 T: 01296 663400 F: 01296 663401 E: simplystainless@rhhall.com W: www.rhhallfabrications.com Page 1 T: 01296 663400 F: 01296 663401 E: simplystainless@rhhall.com W: www.rhhallfabrications.com
MODEL CMA-180UC PARTS MANUAL Rev 1.16
MODEL CMA-180UC PARTS MANUAL Rev 1.16 CMA DISHMACHINES 12700 KNOTT STREET GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS MODEL CMA-180UC 1. PARTS
Novelli Sanitaryware Collection 2010
Novelli Sanitaryware Collection 00 Building Products Pty Ltd Lifestyle Series - Toilet Suites, Basins and Vessels Building Products Pty Ltd Cara Pedestal Basin Armanti Verno Bidet and Cara Back-To-Wall
food service tapware Pre-Rinse Assemblies HEAVY DUTY FIT FOR PURPOSE PERFORMANCE AND EFFICIENCY Hands Free Foot & Knee Operated Tapware
food service tapware Pre-Rinse Assemblies HEAVY DUTY FIT FOR PURPOSE PERFORMANCE AND EFFICIENCY Hands Free Foot & Knee Operated Tapware A joint government and industry program Licence No. 0058 Water Consumption
CMS1402 SERVICE PARTS
This parts lists shows the service parts for the CMS1402 air cooled and the CMS1402 water cooled. A B model was introduced in early 1992, the major change was the front panels. Check the model number of
PARTS MANUAL. American Dish Service MODEL: 5-AG-S ADS LOW TEMPERATURE DISHWASHER EFFECTIVE: JULY, 2013 C 4/08
EFFECTIVE: JULY, 2013 ADS LOW TEMPERATURE DISHWASHER MODEL: PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 C 4/08 The American Dish Service part numbers contained in this publication
MODEL CMA-180UC PARTS MANUAL Rev 1.18
MODEL CMA-180UC PARTS MANUAL Rev 1.18 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS MODEL CMA-180UC 1. PARTS
Model 10AB/APRB Automatic Dishwasher
Model 10AB/APRB Automatic Dishwasher Rinse and Wash Head Assemblies ITEM 1 0126800 End Plug 2 0125000 Rinse Arm Body (only) 3 0126000 Nylatron Washer (2 places) 4 0125500 Hex Nut 5 0126500 Snap Ring 6
O.D / 2" (444) 15 1 / 2 " (393) Maximum I.D / 4 " (336) 1 3 / 4 " (45) 1 1 / 4 " (32)
standard basin 100 Specifications 1.1.3 Standard Round Basin with Overflow Item No. 100 For Undercounter Mount Installation Recommended openings for Under Counter mounting: Min. Diameter: 13 1 / 4 (337).
CMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts.
CMA Dishmachines 1700 Knott Avenue Garden Grove, CA 981 Toll Free: 1- (800) 8-617 Fax: 1- (71) 89-11 Service Replacement Parts Undercounter High Temperature Dishwasher Model: UC6e M Machine Serial No.
CME1856W Service Parts
This parts list contains the part numbers and description of the replacement parts available for this model. To avoid costly and time consuming errors, double check the model and voltage before ordering
Fixtures Installation
Youth Explore Trades Skills Description Students will learn to install a toilet and lavatory basin. Lesson Outcomes The student will be able to: Install a toilet Install a lavatory basin Assumptions The
Protected with TechCoat finish. For Ceramic Tile Showers Cast iron Threaded for test nipple Extra heavy (.050) strainer DRAIN CONNECTION
QUICK CONNECT SHOWER DRAIN Protected with TechCoat finish Quick Clamping Gasket And Collar For Ceramic Tile Showers Cast Iron Clamping collar securely attaches drain to drain line Speeds installation Extra
eneral abrication Sinks and Dishwash Tabling 17.01
eneral abrication Sinks and Dishwash Tabling 17.01 2 GENERAL FABRICATION 3 S Range Sink Units S Range Sink Unit Tops with heavy duty Bowls, manufactured from type 304 stainless steel, that form a single
CATALOGUE 2018/19: SINKS
CATALOGUE 2018/19: SINKS +61 7 5478 9977 sales@smartlinemachinery.com www.smartlinemachinery.com PO Box 532, Buderim, Qld, 4456 55 Cordwell Rd, Yandina, Qld, 4561 2 Electric Height Adjustable Washing Station
2018 RETAIL PRICELIST
2018 RETAIL PRICELIST General Information Finishes Perrin & Rowe Classical, Deco & Contemporary products are available in a range of finishes: Chrome, Nickel, Pewter, Gold, English Bronze, Polished Brass
UNIVERSAL 750 PRE-MIX DISPENSER
Anoka, MN. 0 - Telephone -00--00 Facsimile -00--0 MODEL NO. xxx xxx Universal 0 of Control Code A Manual Part No. 00 -- Revised: -- ªIMI Cornelius Co., - Anoka, MN. 0 - Telephone -00--00 Facsimile -00--0
DESIGN STANDARDS SECTION PLUMBING FIXTURES AND EQUIPMENT. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.
PART 1 - GENERAL 1.1 Toilet rooms and utility rooms to have floor drains at lowest point. 1.2 Utilize Exposed Flushometers. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.
EFFECTIVE: MAY, American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL. 900 Blake Street Edwardsville, Kansas (913) /08
EFFECTIVE: MAY, 2014 American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 The American Dish Service part numbers contained in this
EXPLODED VIEWS & PARTS LISTS
542 DOOR VIEW Ref. Part No. Description Ref. Part No. Description 1 6200720 Screw, #8-18 x 1/2 PH Truss HD 2 420040 Standard Handle End Cap Replacement Components 4200700 Extended Handle End Cap Replacement
Caution: Dual-Flex rim
INSTALLATION Caution: All installation types need to allow room for faucet installation. Ensure adequate clearance behind the basin for your faucet and backsplash, as well as the full range of motion for
Canning Shed/Facility Equipment Specifications
Canning Shed/Facility Equipment Specifications Item Qty Description 1 1 ea WALK IN COOLER Fast Trak Indoor One Compartment Walk In, 8' x 8' x 7' 7" H, compartments, cooler with smooth aluminum interior
8 Kitchen Gooseneck. 4 Lavatory/Shower. 8 Shower. Adjustable Garden Tub. Diverter Spring & Spool Diverter Knob Plastic Aerator Speedy Locknut
8 Kitchen 8 Kitchen Gooseneck 4 Kitchen 10979 Chrome 10991 Chrome 10991W White 10987 Chrome 4 Lavatory 4 Lavatory/Shower 8 Tub/Shower 10983 Chrome 10983W White 10988 Chrome 10981 Chrome 4 Tub/Shower 8
FOOD WASTE DISPOSER INSTALLATION AND USE MANUAL
FOOD WASTE DISPOSER INSTALLATION AND USE MANUAL English only (Australia and New Zealand) 1a 1 1b 1 1c 11 3 1 17 3 13 4 1 7 14 1 0 1 7174 Rev C www.insinkerator.com 01 InSinkErator, a business unit of Emerson
SELECTION GUIDE PLUMBING
SELECTION GUIDE PLUMBING Design is a funny word. Some people think design means how it looks. But of course, if you dig deeper, it s really how it works. - Steve Jobs 2 PLUMBING RANGE GUIDE Contents Vanities...
COOKTOP, BURNER AND GRATE PARTS For Model: JGRP548WP00 (Stainless)
COOKTOP, BURNER AND GRATE PARTS 48" Stainless Commercial Style Range 8 10 Litho in U.S.A. (amd) (psw) 1 Part No. Rev. B COOKTOP, BURNER AND GRATE PARTS 1 Literature Parts Tech Sheet W10323236 English W10323237
PROPOSED NEW BUILDING
HYDRAULIC DRAWINGS MATERIALS SERVICES TO BE CONSTRUCTED FROM MATERIAL AS LISTED BELOW UNLESS NOTED OTHER WISE SHOWN ON DRAWINGS. SERVICE MATERIAL REMARKS SEWER DRAINAGE upvc SOLVENT WELDED JOINTS SEWER
DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point.
PART 1 - GENERAL 1.01 Toilet rooms and utility rooms to have floor drains at lowest point. 1.02 Utilize Exposed Flushometers. 1.03 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.
EXPLODED VIEWS & PARTS LISTS
561 DOOR VIEW Ref. Part No. Description Ref. Part No. Description 1 6200720 Screw, #8-18 x 1/2 PH Truss HD 2 420040 Standard Handle End Cap Replacement Components 4200700 Extended Handle End Cap Replacement
owners manual mara washlounge #1408 MARA comfortel.com.au
owners manual mara washlounge #1408 MARA comfortel.com.au GET STARTED MARA Reclining backrest washlounge with footrest. Optional basin colour of black or white. Width: 530mm Length: 1350mm Basin Height:
PARTS MANUAL. American Dish Service ADS CONVEYOR DISHWASHER MODELS: ADC-44 L-R/R-L EFFECTIVE: SEPTEMBER 1, 2001
EFFECTIVE: SEPTEMBER 1, 2001 ADS CONVEYOR DISHWASHER MODELS: ADC-44 L-R/R-L PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 211-0044L-R / 212-0044R-L ADC-44 Conveyor Dishwasher 2
EFFECTIVE: MAY, American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL. 900 Blake Street Edwardsville, Kansas (913) /08
EFFECTIVE: MAY, 2008 American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 021-0061 Model: ASQ Glasswasher American Dish Service
AUTOMATIC WASHER MODELS: 7MMVWC100DW1 (White) 02/26/ Maytag Part No. W Rev. B
AUTOMATIC WASHER MODELS: 7MMVWC100DW1 (White) 2014 Maytag Part W10679609 Rev. B TOP AND CABINET PARTS 2 Part W10679609 Rev. B TOP AND CABINET PARTS Part Description 1 Literature Parts W10658636 Installation
VCBF136RSS3 : CABINET [1/9]
![VCBF136RSS3 : CABINET [1/9]](/thumbs/86/93678521.jpg "VCBF136RSS3 : CABINET [1/9]")
VCBF136RSS3 : 001 - CABINET [1/9] Page 1 of 18 VCBF136RSS3 : 001 - CABINET [1/9] Ref # Part Number Qty. Description 1 017000-000 1 COVER, RIGHT HINGE (APOLLO GREY) 2 021734-000 1 SCREW 3 021733-000 3 SCREW
LABOUR RATES FOR PLUMBING CONTRACTORS. A guide to the labour costs of plumbing works LABOUR RATES FOR PLUMBING CONTRACTORS
LABOUR RATES FOR PLUMBING CONTRACTORS A guide to the labour costs of plumbing works MORE MONEY IN YOUR POCKET September 06-1 - Increasers Labour Time Required In Hours DURAVENT STYLE INCREASER 75-100MM
REPAIR PART DIAGRAMS. Pages: 1-6
REPAIR PART DIAGRAMS PRODUCT: MODEL: DISHWASHER LL S The information included in this Ariston Spare Parts List may change without notice please see our web site www.usservicenet.com for updates, corrections
PARTS STOCKED REPLACEMENT FAUCET BIBB SCREWS... SCREW ASSORTMENT MISC. 3 /8" BIBB LOC SCREW 1 /2" BIBB SCREW 1 /2" BIBB LOC SCREW 3 /8" BIBB SCREW
January 1, 2001 STOCKED REPLACEMENT FAUCET BIBB SCREWS... Parts-5L 3 /8" BIBB SCREW 6-32 GAUGE CHROME 35138- No. 1 3 /8" BIBB SCREW 10-24 GAUGE CHROME 35153- No. 16 3 /8" BIBB SCREW 8-32 GAUGE CHROME 35141-
INSTALLATION MANUAL Wolfen Hob Mounted Sensor Tap with Internal Solenoid. Installation Details Warranty
TM INSTALLATION MANUAL 9506036 Wolfen Hob Mounted Sensor Tap with Internal Solenoid Installation Details Warranty WOLFEN INSTALLATION MANUAL Technical Information TM IF AFTER CHECKING THE INSTALLATION
REGISTRATION EXAMINATION, NOVEMBER 2014 LICENSED PLUMBER QUESTION AND ANSWER BOOKLET. Time allowed THREE hours
Affix label with Candidate Code Number here. If no label, enter candidate Number if known No. 9192 REGISTRATION EXAMINATION, NOVEMBER 2014 LICENSED PLUMBER INSTRUCTIONS QUESTION AND ANSWER BOOKLET Time
WESTINGHOUSE REFRIGERATOR SIDE BY SIDE FROST FREE V SERIES
ELECTROLUX HOME PRODUCTS PTY LTD ABN 51 004 762 341 PRINT POST APPROVED PP565001/00099 Issue: 1 Technical Publication Nº RE 101 Book C27 Date: 2/04 WEB SITE ADDRESS: http://trade.partnship.com.au WESTINGHOUSE
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
A. All fixtures shall meet the requirements of ANSI A117.1, ANSI Z124.2 and the State of Texas Accessibility Standards (TAS).
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
REPAIR PART DIAGRAMS PRODUCT: WASHER MODEL: AW 120
REPAIR PART DIAGRAMS PRODUCT: WASHER MODE: AW 0 The information included in this Ariston Spare Parts ist may change without notice please see our web site www.usservicenet.com for updates, corrections
Repair Parts List WASHER MODEL NUMBER MAH21PDDXW. When requesting service or ordering parts, always provide the following information:
Repair Parts List WASHER MODEL NUMBER MAH21PDDXW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
Repair Parts List DISHWASHER MODEL NUMBER MDB6100AWW. When requesting service or ordering parts, always provide the following information:
Repair Parts List DISHWASHER MODEL NUMBER MDB6100AWW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description
HL45, HL80 Thermostatic High-Low Valves
Lead-Free Brass Design Reliable Liquid-Filled Thermostat with 10 year warranty Integral Strainer Checkstops on Inlets Adjustable Set Point within Temperature Range Accurate Temperature Control to within
IFO6872. Ifo Sign Toilet Increased Height P Trap AS1428.1:2009. Product Code. Call
When tested in accordance with Standard AS/NZS 60 For more information and to compare products, refer to: Ifo Sign Toilet Increased Height P Trap AS1428.1:2009 White freestanding toilet suite with 460mm
TAPS, SHOWER HEADS, BATHROOM ACCESSORIES, SINKS AND LAUNDRY TUBS
TAPS, SHOWER HEADS, BATHROOM ACCESSORIES, SINKS AND LAUNDRY TUBS SourceCorp Australia specialises in the manufacturing, procurement and supply of construction-based products direct from China. Success
Sanitary & Hospital Equipment
Sanitary & Hospital Equipment Introduction With 40 years experience, M&G Olympic Products has maintained its position as a leading specialist in the design, manufacture and installation of custom built
CME1856W Service Parts
This parts list contains the part numbers and description of the replacement parts available for this model. To avoid costly and time consuming errors, double check the model and voltage before ordering
AMTEKCO 2013 PRICELIST
1 Compartment Sinks C-1-1818 $1,687.50 C-1-2424 $1,906.20 C-1-3024 $2,206.80 C-1-1618-18 R or L $2,538.00 C-1-1618-24 R or L $2,581.20 C-1-1824-18 R or L $2,681.10 C-1-1824-24 R or L $2,739.60 C-1-2424-18
USER MANUAL HACCP. Footwear Sanitizing System
SmartStep HACCP Ftwear Sanitizing System USER MANUAL ADB0002: Standard Sanitizing Unit ADB0002-MH: Sanitizing Unit with Handle ADB0002-BS: Sanitizing Unit with Bt Scrubber and Handle USP20031: Bt Scrubber
Dishwashing. The brand for demanding professionals
Dishwashing The brand for demanding professionals Glass washers Impeccable results The Eolya Cristal, glass washers, complies with HACCP, regulations, ensuring the rinse is a constant 85 C. This rinse
for Janitorial CI/SfB January 2015 (7-) h3 Uniclass L721/L83/L852
for Janitorial CI/SfB January 2015 (7-) h3 Uniclass L721/L83/L852 For more information or to order please call 0113 2634184 or visit our website www.plandstainless.co.uk Beautifully designed stainless
Homestyle Stack Washer/Dryers
Homestyle Stack Washer/Dryers Refer to Page 3 for Model Numbers Parts SWD456C_806105 www.alliancelaundry.com Part No. 806105R1 November 2015 Table of Contents Title Page Parts Ordering Information...
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
1/7 SPOUT INSTALLATION
Rev 06/06 Installation Instruction CHADWICK COLLECTION Widespread Lavatory Set Please read the instructions completely before beginning the installation. Chadwick Collection Model Number: 430GL Flush both
COBRA -300H EXTRACTOR
COBRA -300H EXTRACTOR 120V INFORMATION & OPERATING INSTRUCTIONS DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always
Catering & Purpose Made Equipment
Catering & Purpose Made Equipment Introduction With 40 years experience, M&G Olympic Products has maintained its position as a leading specialist in the design, manufacture and installation of custom built
MLG19PDAWW BASE (S/P) (S/P) (S/P) (S/P) DESCONTINUADO (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) DESCONTINUADO
MLG19PDAWW BASE MLG19PDAWW BASE 1 22003580 BASE, ASSEMBLY (S/P) 1 22003435 BASE (S/P) 2 33001989 RETAINER, WIRE (S/P) 2 22003298 RETAINER, WIRE (S/P) 3 Y313561 DESCONTINUADO 4 22002014 CLIP (S/P) 5 22003059
COOKTOP, BURNER AND GRATE PARTS For Model: JDRP430WP00 (Stainless)
COOKTOP, BURNER AND GRATE PARTS 30" Commercial Style Range 8 10 Litho in U.S.A. (amd)(bay) 1 Part No. Rev. A COOKTOP, BURNER AND GRATE PARTS 1 Literature Parts Tech Sheet W10294839 English W10294843 French
Builders Package: Bronze
Builders Package: Bronze Tradelink 2018 BATH TUB RECLINE II RECTANGLE BATH 1510MM- 134171 The Recline Bath is a compact, everyman's bath that promises value for money. Available in two ready-to-fit sizes,
AQUARITE DELUXE Model: HW Installation Manual
AQUARITE DELUXE Model: HW205930 Installation Manual Table of Contents Diagrams. 1 Tools Needed for Installation. 1 Notice to Installers. 2 Packing List. 2 Hinge Assembly. 2 Drain assembly Information.
eware Handling & Cleaning Procedures
Procedures Best practice in ware washing, equipment and hard surfaces Why am I doing this program? An important part of your job is to enhance the safety and satisfaction of your customers and co-workers.
Acrylic Claw Foot Tub
Acrylic Claw Foot Tub Wrench or socket Drill & Bits Parts Recommended 2-2 x12 boards 4 Lag Bolts 4 Flat Washers Be sure to re-inforce the floor before securing tub. We recommend 2-2 x12 s securely fastened
Minor Home Repairs. November 4, County of Henrico Department of Community Revitalization
Minor Home Repairs 1 November 4, 2017 County of Henrico Department of Community Revitalization Educate homeowners on basic technical skills that will help the homeowner understand daily operations of different
laundry and kitchen collection the complete range of laundry units, insert bowls, kitchen sinks and mixer taps to complement any home.
laundry and kitchen collection the complete range of laundry units, insert bowls, kitchen sinks and mixer taps to complement any home. Laundry Unit Range For the budget conscious, the Project Range offers
FLOOD KING 120V. 2. Keep all filters clean. Do not operate the machine if the filters are clogged.
FLOOD KING 120V INFORMATION & OPERATING INSTRUCTIONS DO NOT OPERATE THE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THESE INSTRUCTIONS. IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always be sure
Repair Parts List DISHWASHER MODEL NUMBER MDB7100AWW. When requesting service or ordering parts, always provide the following information:
Repair Parts List DISHWASHER MODEL NUMBER MDB7100AWW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description
Operators manual Slim/B Water heater
Operators manual Slim/B Water heater Isotemp Slim water heater has been designed and produced to ensure that your water heater will give long and trouble free operation for many years. It is important,
RDFN536DSS02 : CABINET [1/10]
![RDFN536DSS02 : CABINET [1/10]](/thumbs/92/110582101.jpg "RDFN536DSS02 : CABINET [1/10]")
RDFN536DSS02 : 001-001-CABINET [1/10] Page 1 of 20 RDFN536DSS02 : 001-001-CABINET [1/10] Ref # Part Number 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 21 021970-000 021679-000 021790-000 021936-000 021949-000
Gray Water Capacity. Pump Capacity (per stroke) Number of Single Dispenses. NOTE: All dimensions are subject to change due to environmental factors.
BRAVO! 2-STATION HANDWASH SINK Operations & Maintenance Guide POLYJOHN PATENT PENDING SPECIFICATIONS Dimension Imperial Metric Height 62 in 157 cm Width 26.5 in 67 cm Depth 21.5 in 54 cm Fresh Water Capacity
Food Premises - Structural Specifications
Food Premises - Structural Specifications Floors, Walls and Ceilings Floors Provide a floor surface with a material suited to the process: easily cleanable a light colour Floor to wall join in the food
PARTS MANUAL. American Dish Service ADS LOW-WATER DISHWASHER MODELS: L3DW / L3DWC EFFECTIVE: MAY, 2008
EFFECTIVE: MAY, 2008 ADS LOW-WATER DISHWASHER MODELS: L3DW / L3DWC PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 The part numbers contained in this publication are replacement
DDFF036 SERIES 11 : CONTROLS [1/15]
![DDFF036 SERIES 11 : CONTROLS [1/15]](/thumbs/71/65991523.jpg "DDFF036 SERIES 11 : CONTROLS [1/15]")
DDFF0 SERIES : 00 - CONTROLS [/5] Page of 0 DDFF0 SERIES : 00 - CONTROLS [/5] Page of 0 Ref # Part Number Qty. Description 4 5 7 8 9 0 4 5 7 8 9 0 NI NI PS400044 PS4004 PS40004 PS400047 PS400048 PS400049
Mobile Heated Cabinet
Job: Item No. Mobile Heated Cabinet Heavy duty heated holding/transport cabinet for use with 12 X 20 pans. All stainless steel construction Fully insulated Cabinets fully framed all vertical and horizontal
Home Stack Washer/Dryers
Home Stack Washer/Dryers Refer to Page 3 for Model Numbers Parts SWD456C_806093 www.alliancelaundry.com Part No. 806093R1 December 2016 Table of Contents Title Page Parts Ordering Information... 2 Serial
Owner's Manual. (200 Gallon Lawn Service Skid Sprayer) Technical Specifications. Operation. General Information. Warranty/Parts/Service
Owner's Manual (00 Gallon Lawn Service Skid Sprayer) Technical Specifications. Horsepower Recoil Start Engine Roller Cast Iron Pump 0 Gallons Per Minute at 0 PSI Pressure Gauge-Adjustable Pressure Range
Visit fluidmasteruk.com and opella.co.uk. Two great companies on their own are now even BETTER TOGETHER
Visit fluidmasteruk.com and opella.co.uk The Ultimate Plumbing SOLUTION Two great companies on their own are now even BETTER TOGETHER Fluidmaster Has The Total Solution Table of Contents A True Leader
IMPORTANT INFORMATION. Revised Dishwasher Installation Instructions
IMPORTANT INFORMATION Revised Dishwasher Installation Instructions To obtain a revised copy of the entire Dishwasher User s Manual, go to www.eurotechappliances.com. SPECIAL EDITION 11-20-02 SAVE THESE
DOOR AND PANEL PARTS
DOOR AND PANEL PARTS PORTABLE DISHWASHER 1 Literature Parts W10255025 Instructions, Installation W10275154 Energy Guide W10275146 Guide, Use & Care English/French W10275147 Guide, Use & Care Spanish W10275468
Capacity/Description white gray red blue yellow green dimensions packaging
Gator Containers Gator Containers and Lids molded with highest quality polyethylene resin one piece molded construction creates high impact and crush resistance with lid locked, container is animal and
IFO6820. Ifo Sign Junior Toilet S Trap. Product Code. Call
When tested in accordance with Standard AS/NZS 6400 For more information and to compare products, refer to: Ifo Sign Junior Toilet S Trap One-piece free standing junior toilet. Suitable for child care
TOP AND CABINET PARTS For Models: WFW94HEAW0, WFW94HEAC0 (White) (Chrome Shadow)
TOP AND CABINET PARTS 7 12 Printed in U.S.A. (JLP)(bay) 1 AUTOMATIC WASHER Part No. Rev. B TOP AND CABINET PARTS 1 Literature Parts W10441093 Installation Instructions W10441071 Use & Care Guide W10441081
TRUMAN STATE UNIVERSITY PRESIDENT S RESIDENCE RENOVATION
SECTION 224100 - RESIDENTIAL PLUMBING FIXTURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
Series 1000 & Storage Water Heaters
Series 1000 & 2000 Storage Water Heaters 1000 Series Vented Water Heaters THE 1000 SERIES WATER HEATER IS SUPPLIED VIA A HEADER TANK AND IS SUITABLE FOR A WIDE RANGE OF COMMERCIAL AND INDUSTRIAL APPLICATIONS
PARTS MANUAL. American Dish Service. ADS HIGH TEMP SINGLE RACK DISHMACHINE MODELS: HT-25 5 WIRE 110 Volt Control System
EFFECTIVE: MAY 1, 2018 ADS HIGH TEMP SINGLE RACK DISHMACHINE MODELS: 5 WIRE 110 Volt Control System PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)-422-3700 C 05/2018 The American Dish Service
PARTS WASHER Model: CW1D Part No:
PARTS WASHER Model: CW1D Part No: 7630900 OPERATING & MAINTENANCE INSTRUCTIONS GC01/12 INTRODUCTION Thank you for purchasing this CLARKE Parts Washer. Before using the product, be sure to read these instructions
SECTION CUSTOM FABRICATED FOODSERVICE EQUIPMENT
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 11 40 11 CUSTOM FABRICATED FOODSERVICE EQUIPMENT SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Delete other items or paragraphs in
A. Section Joint Sealants: Seal fixtures to walls and floors.
SECTION 224000 - PLUMBING FIXTURES PART 1 GENERAL 1.1 SECTION INCLUDES A. Water closets. B. Urinals. C. Lavatories. D. Sinks. E. Service sinks. F. Showers. G. Wash fountains. H. Eye wash fountains. 1.2
Trade of Plumbing. Module 2: Domestic Hot and Cold Water Service Unit 11: Sanitary Appliances Phase 2
Trade of Plumbing Module 2: Domestic Hot and Cold Water Service Unit 11: Sanitary Appliances Phase 2 Table of Contents List of Figures... 4 List of Tables... 5 Document Release History... 6 Module 2 Domestic