Gas Furnaces. Gas Furnaces. 2-Stage Variable-Speed. 2-Stage Multi-Speed Multipoise. Multipoise 80AFUE. 2-Stage Variable-Speed Multi-Speed Multipoise

Transcription

1 % 96AFUE 2-Stage Variable-Speed % 95AFUE 2-Stage Multi-Speed Multipoise % 92AFUE Multipoise % AFUE 2-Stage Variable-Speed Multi-Speed Multipoise 86 87

2 96 % AFUE 2-Stage, Variable-Speed Up to 96 AFUE Variable-speed ECM blower motor, two-speed inducer motor and two-stage gas valve Energy Star Compliant Silicon Nitride hot surface igniter Slow opening two-stage gas valve for safe ignition Side-wall or vertical venting 4-way multipoise design with unique vent elbow Direct and non-direct venting capable Convenient electronic air cleaner and humidifier terminals Stores fault codes during power outage Adjustable blower speed for cooling, continuous fan and dehumidification SiN Igniter for physical and electrical robustness and durability Aluminized steel primary heat exchanger Stainless steel condensing secondary heat exchanger 20-year limited warranty on heat exchangers upon registration Ideal height 35 cabinet: short enough for taller coils, still allows room for service Solid durable galvanized steel cabinet construction Direct-vent capable sealed combustion system Fully insulated blower compartment and gasket sealed furnace casing PG96V Title Brand Product Efficiency Voltage/Motor Major Series Stages Cooling Cap. Capacity Width Minor Series Variations Product #/ Letter P G 96 V A Descriptions V=Variable speed X=High efficiency S=Standard/PSC T A A AA T=Two-stage 040=40,000 BTU A=14.2 Std. S=Single-stage 060=60,000 BTU B=17.5 Std. 0=,000 BTU C=21.0 Std. 100=100,000 BTU D=24.5 Std. 120=120,000 BTU 88 89

3 95 % AFUE 2-Stage, Multi-Speed Up to 95.5 AFUE Two heating stages and efficient ECM blower motor Energy Star Compliant Silicon Nitride hot surface igniter Slow opening two-stage gas valve for safe ignition Side-wall or vertical venting 4-way multipoise design with unique vent elbow Direct and non-direct venting capable Convenient electronic air cleaner and humidifier terminals Stores fault codes during power outage Advanced humidity control when paired with a compatible condensing unit and using a humidity sensing thermostat Adjustable constant fan speed from a compatible thermostat SiN Igniter for physical and electrical robustness and durability 20-year limited warranty on heat exchangers upon registration Aluminized steel primary heat exchanger Stainless steel condensing secondary heat exchanger Ideal height 35 cabinet: short enough for taller coils, still allows room for service Solid durable galvanized steel cabinet construction Direct or single-pipe venting or optional ventilated combustion air Fully insulated blower compartment and gasket sealed furnace casing PG95X Title Brand Product Efficiency Voltage Major Series Stages Cooling Capacity Capacity Width Variations Product #/ Letter P G 95 X A Descriptions X=High efficiency S=Standard/PSC T A AA T=Two-stage 040=40,000 BTU A=14.2 Std. S=Single-stage 060=60,000 BTU B=17.5 Std. 0=,000 BTU C=21.0 Std. 100=100,000 BTU D=24.5 Std. 120=120,000 BTU 90 91

4 95 % AFUE Multipoise Up to 95.5 AFUE Reliable hot surface ignition Slow opening gas valve for safe ignition Side-wall or vertical venting 4-way multipoise design Direct and non-direct venting capable Convenient electronic air cleaner and humidifier terminals Stores fault codes during power outages SiN Igniter for physical and electrical robustness and durability Aluminized steel primary heat exchanger Stainless steel condensing secondary heat exchanger 20-year limited warranty on heat exchangers Ideal height 35 cabinet: short enough for taller coils, still allows room for service Solid durable galvanized steel cabinet construction Direct-vent/sealed combustion, single-pipe venting or ventilated combustion air PSC blower motor PG95S Title Brand Product Efficiency Voltage Major Series Product #/ Letter P G 95 S A Descriptions S=Standard/PSC X=High efficiency Stages Cooling Capacity Capacity Width Variations S A AA T=Two-stage 040=40,000 BTU A=14.2 Std. S=Single-stage 060=60,000 BTU B=17.5 Std. 0=,000 BTU C=21.0 Std. 100=100,000 BTU D=24.5 Std. 120=120,000 BTU 140=140,000 BTU 92 93

5 92 % AFUE Multipoise Up to 92.1 AFUE Reliable hot surface ignition Slow opening gas valve for safe ignition Side-wall or vertical venting 4-way multipoise design Direct and non-direct venting capable PSC blower motor Convenient electronic air cleaner and humidifier terminals Stores fault codes during power outages SiN Igniter for physical and electrical robustness and durability Aluminized steel primary heat exchanger Stainless steel condensing secondary heat exchanger 20-year limited warranty on heat exchangers Ideal height 35 cabinet: short enough for taller coils, still allows room for service Solid durable galvanized steel cabinet construction Direct-vent/sealed combustion, single-pipe venting or ventilated combustion air PG92S Title Brand Product Efficiency Voltage Major Series Stages Cooling Capacity Capacity Width Variations Product #/ Letter P G 92 S A Descriptions S=Standard/PSC X=High efficiency S A AA T=Two-stage 040=40,000 BTU A=14.2 Std. S=Single-stage 060=60,000 BTU B=17.5 Std. 0=,000 BTU C=21.0 Std. 100=100,000 BTU D=24.5 Std. 120=120,000 BTU 94 95

6 Payne Variable-Speed Multi-Speed Single-stage Single-stage Features 96V 95X 95S 92S PG96V PG95X PG95S performance design Efficiency (AFUE) up to 96 up to 95.5 up to 95.5 up to 92.1 Variable-Speed Technology Multi-Speed Technology 2-stage gas valve Energy Star Compliant Hot Surface Ignition Vertical or sidewall venting Direct & Non-direct Venting Capable 4-way multipoise design Ideal height 35 cabinet Galvanized steel cabinet Appliance style finish PG92S Low-stage operation Fully insulated blower compartment Direct vent capable sealed combustion Non-volatile fault code memory EAC & Humidifier terminals on control board LED diagnostics Self-test capable Variable-Speed Technology Advanced humidity control Adjustable blower speed SiN Igniter Aluminized steel primary heat exchanger Stainless steel secondary heat exchanger warranty Heat Exchanger warranty 20 year 20 year 20 year 20 year Parts warranty 10 year 10 year 10 year 10 year 96 97

7 Physical Data (PG96V) Unit Size Direct Drive Motor Hp (ECM) Motor Full Load (Amps) /2 6.8 RPM (Nominal/ Speeds) Wheel Diameter x Width 11 x 7 Filter Size (In.) Bottom Return (off delay) / x 8 Adjustable 1 4 3/ x 8 90, 120, Variable 11 x 10 or 1 sec x 10 intervals x Dimensions (HxWxD) 35x14.2x x17.5x Gas Connection (monoport) Size 35x17.5x /2 in. 35x21x NPT 35x21x x24.5x (Redundant) Minimum Manufacturer 4.5 in. wc Maximum 13.6 in. wc Ignition Device Silicon Nitride Physical Data (PG95X) Unit Size Direct Drive Motor Hp (ECM) Motor Full Load (Amps) /2 6.8 RPM (Nominal/ Speeds) Wheel Diameter x Width 11 x 7 Filter Size (In.) Bottom Return (off delay) / x 8 Adjustable 1 4 3/ x 8 90, 120, x 10 or 1 sec x 10 intervals x Dimensions (HxWxD) 35x14.2x x17.5x Gas Connection (monoport) Size 35x17.5x /2 in. 35x21x NPT 35x21x x24.5x (Redundant) Minimum Manufacturer 4.5 in. wc Maximum 13.6 in. wc Ignition Device Silicon Nitride Physical Data (PG95S) Unit Size Direct Drive Motor Hp (ECM) Motor Full Load (Amps) RPM (Nominal/ Speeds) Wheel Diameter x Width / x 7 Filter Size (In.) Bottom Return (off delay) / x / x 8 Adjustable / x 10 90, 120, / x 10 or 1 sec / x 10 intervals / x / x Dimensions (HxWxD) 35x14.2x x17.5x x17.5x x21x x21x x21x x24.5x x24.5x Gas Connection (monoport) Size 1/2 in. NPT (Redundant) Minimum Manufacturer 4.5 in. wc Maximum 13.6 in. wc Ignition Device Silicon Nitride Physical Data (PG92S) Unit Size Direct Drive Motor Hp (ECM) Motor Full Load (Amps) RPM (Nominal/ Speeds) Wheel Diameter x Width / x 7 Filter Size (In.) Bottom Return (off delay) / x 8 1 Adjustable 4 3/ x , 120, / x or 1 sec / x 10 1 intervals / x / x Dimensions (HxWxD) 35x14.2x x17.5x x17.5x x21x x21x x21x x24.5x Gas Connection (monoport) Size 1/2 in. NPT (Redundant) Minimum Manufacturer 4.5 in. wc Maximum 13.6 in. wc Ignition Device Silicon Nitride *PSC=Permanent Split Capacity 98 Note: General product dimensions for reference only. Please see product data sheet for details 99

8 % AFUE Two-Stage Variable-Speed % AFUE Variable-speed ECM blower motor Reliable hot surface ignition Two-stage gas valve 4-way multipoise design 13 different venting options Low NOx models available (JVA) Convenient electronic air cleaner and humidifier terminals Stores fault codes during power outages Humidity control when using a humidity sensing thermostat Adjustable constant fan speed from the thermostat Exclusive Draft Safeguard switch to ensure safe venting 20-year limited warranty on heat exchangers upon registration Small and compact, only 33 inches tall Convenient and aesthetically pleasing single front door design Solid, durable galvanized steel cabinet construction Fully insulated blower compartment and gasket sealed furnace casing Separate internal blower door for reduced fan noise and quieter operation PG8MVA PG8JVA Title Brand Product Efficiency Variation Motor Product #/ Letter P G 8 M V Descriptions % M=Multipoise V=Variable Speed J=Low NOx E=Multi-Speed A=Standard/PSC Major Series Cooling Capacity Capacity Variations A AA =70,000 BTU =90,000 BTU =110,000 BTU =135,000 BTU

9 % AFUE Multi-speed % AFUE Multi-speed ECM blower motor Reliable hot surface ignition Slow opening gas valve for safe ignition 4-way multipoise design 13 different venting options Low NOx models available (JEA) Convenient electronic air cleaner and humidifier terminals Stores fault code during power outages Humidity control when using a humidity sensing thermostat Adjustable constant fan speed from the thermostat Exclusive Draft Safeguard switch to ensure safe venting 20-year limited warranty on heat exchangers upon registration Small and compact, only 33 inches tall Convenient and aesthetically pleasing single front door design Solid, durable galvanized steel cabinet construction Fully insulated blower compartment and gasket sealed furnace casing Separate internal blower door for reduced fan noise and quieter operation PG8MEA PG8JEA Title Brand Product Efficiency Variation Motor Product #/ Letter P G 8 M E Descriptions % M=Multipoise V=Variable Speed J=Low NOx E=Multi-Speed A=Standard/PSC Major Series Cooling Capacity Capacity Variations A AA =45,000 BTU =70,000 BTU =90,000 BTU 110=110,000 BTU 135=135,000 BTU

10 % AFUE Multipoise % AFUE Reliable hot surface ignition Stores fault code during power outages Slow opening gas valve for safe ignition 4-way multipoise design 13 different venting options Adjustable heating air temperature rise Exclusive Draft Safeguard switch to ensure safe venting Low NOx models available (JAA) 20-year limited warranty on heat exchangers Small and compact, only 33 inches tall Convenient and aesthetically pleasing single front door design Solid durable galvanized steel cabinet construction Gasket sealed furnace casing Separate internal blower door for reduced fan noise and quieter operation PG8MAA PG8JAA Title Brand Product Efficiency Variation Motor Product #/ Letter P G 8 M A Descriptions % M=Multipoise V=Variable Speed J=Low NOx E=Multi-Speed A=Standard/PSC Major Series Cooling Capacity Capacity Variations A AA =45,000 BTU =70,000 BTU =90,000 BTU =110,000 BTU =135,000 BTU =155,000 BTU

11 Payne Variable-Speed Multi-Speed Single-stage Features performance Efficiency (AFUE) % % % Variable-Speed Technology Multi-Speed Technology 2-stage gas valve 13 venting options Hot surface ignition 4-way multipoise design PG8MVA PG8JVA PG8MEA design Single front door design Galvanized steel cabinet Appliance style finish Low-stage operation Fully insulated blower compartment Separate internal blower door PG8JEA PG8MAA PG8JAA Non-volatile fault code memory EAC & Humidifier terminals on control board LED diagnostics Self-test capable Humidity control Adjustable constant fan speed Draft Safeguard Switch warranty Heat Exchanger Warranty 20 year 20 year 20 year Parts Warranty 10 year 10 year 10 year

12 Physical Data (PG8MVA/PG8JVA) Unit Size Output Capacity Btuh* (Nonweathered ICS)** PG8MVA, PG8JVA Upflow PG8JVA PG8MVA, Downflow/ PG8JVA Horizontal Upflow Input Btuh* PG8JVA Downflow/ Horizontal (lbs) Certified Ext Static Airflow CFM Certified Temp Rise Range ( F) Cooling Cooling ,000 51,000 66,000 63, ,000 68,000 88,000 84, ,000 85, , , , , , , Dimensions (HxWxD) AFUE%* Nonweatherized ICS (Monoport) 33-1/4x14-3/16x /4x17-1/2x /4x21x /4x24-1/2x29 Solid State Time Operation Gas Connection size 1/2 in. NPT Min. (in wc) 4.5 Max. Ignition (in wc) Device 13.6 Hot Surface Physical Data (PG8MEA/PG8JEA) Unit Size Output Capacity Btuh* (Nonweathered ICS)** PG8MEA, PG8JEA Upflow PG8JEA PG8MEA, Downflow/ PG8JEA Horizontal Upflow Input Btuh* PG8JEA Downflow/ Horizontal (lbs) Certified Ext Static Airflow CFM Certified Temp Rise Range ( F) Cooling Cooling ,000 34,000 44,000 42, ,000 51,000 66,000 63, ,000 69,000 88,000 84, ,000 86, , , , , , , Dimensions (HxWxD) AFUE%* Nonweatherized ICS (Monoport) 33-1/4x14-3/16x /4x17-1/2x /4x21x /4x21x29 Solid State Time Operation /4x24-1/2x29 6 Gas Connection size 1/2 in. NPT Min. (in wc) 4.5 Max. Ignition (in wc) Device 13.6 Hot Surface Physical Data (PG8MAA/PG8JAA) Unit Size Output Capacity Btuh* (Nonweathered ICS)** PG8MAA, PG8JAA Upflow PG8JAA PG8MAA, Downflow/ PG8JAA Horizontal Upflow Input Btuh* PG8JAA Downflow/ Horizontal (lbs) Certified Ext Static Airflow CFM Certified Temp Rise Range ( F) Cooling Cooling ,000 34,000 44,000 42, ,000 34,000 44,000 42, ,000 51,000 66,000 63, ,000 51,000 66,000 63, ,000 51,000 66,000 63, ,000 68,000 88,000 84, ,000 68,000 88,000 84, ,000 68,000 88,000 84, ,000 85, , , ,000 85, , , ,000 85, , , , , , , , , , , , , , , Dimensions (HxWxD) AFUE%* Nonweatherized ICS 33-1/4x14-3/16x29 (Monoport) 33-1/4x14-3/16x /4x14-3/16x /4x14-3/16x /4x17-1/2x /4x17-1/2x /4x21x /4x21x /4x17-1/2x29 Solid State Time Operation /4x21x /4x21x /4x21x /4x24-1/2x /4x24-1/2x Gas Connection size 1/2 in. NPT Min. (in wc) 4.5 Max. Ignition (in wc) Device 13.6 Hot Surface *Gas input ratings are certified for elevations to 2000 ft. For elevations above 2000 ft., reduce ratings 4 percent for each 1000 ft. above sea level. Refer to National Fuel Gas Code Table F4 or furnace installation instructions. In Canada, derate the unit 10 percent for elevations 2000 to 4500 ft above sea level. **Capacity in accordance with U.S. Government DOE test procedures. Note: General product dimensions for reference only. Please see product data sheet for details Airflow shown is for bottom only return-air supply in comfort mode (as shipped). For air delivery above 10CFM, see Air Delivery Table for other options. A filler is required for each return air supply. ICS=Isolated Compustion System