Hi-Pres. Self Contained A/C Unit HI-PRES MARINE & OFFSHORE

Size: px

Start display at page:

Download "Hi-Pres. Self Contained A/C Unit HI-PRES MARINE & OFFSHORE"

June Benson
5 years ago
Views:

1 Hi-Pres Self Contained A/C Unit TYPE SCU-C & SCU-W Product specifications HI-PRES MARINE & OFFSHORE

2 Contents Introduction Type SCU-W Type SCU-C Marine Self-Contained A/C Unit Type SCU-W Capacities Dimensions Construction Marine Self-Contained A/C Unit Type SCU-C Capacities Dimensions Construction MU

3 Introduction Novenco has developed a series of self-contained units for Hi-Pres Single-Pipe Systems serving ships accommodation with requirements up to 3.70 m 3 /s of airflow and cooling capacity up to 233 kw. High-Pressure Self-contained Units have the following advantages: All air handling equipment including cooling compressor has been assembled, built-in, and connected on a common framework ready to install on a rigid plan foundation. All units have been tested and are ready for start-up after connection of power supply, cooling water for the condenser, heating media supply for the heating coil and connection to the air duct systems. The High-Pressure Self-contained Units are available as two types and six different sizes. Type SCU-W Type SCU-W is available in 2 sizes with capacities up to 1.32 m 3 /s of air and 56 kw cooling. Type SCU-C Type SCU-C is available in 4 sizes with capacities up to 3.70 m 3 /s of air and 233 kw cooling. For local air conditioning in rooms such as Engine Control Rooms, Switchboard rooms, Workshops etc., a Low-Pressure Self-contained Unit type NovPac-R is recommended. See separate chapter. kw 200 SCU-C SCU-C 160 SCU-C SCU-C SCU-W 37 SCU-W 56 0,5 1,0 1,5 2,0 2,5 3,0 3,5 m 3 /s Airflow and cooling capacities for SCU-W and SCU-C 2 Introduction

Marine Self-Contained A/C Unit Type SCU-W The self-contained A/C unit type SCU-W is a compact unit specially designed for marine installations as air supply for single pipe air conditioning systems

4 Marine Self-Contained A/C Unit Type SCU-W The self-contained A/C unit type SCU-W is a compact unit specially designed for marine installations as air supply for single pipe air conditioning systems on workboats. The SCU-W contains connected to air ducts, cooling water pipes and electrical supply. The SCU-W is equipped with a unique PLC-based control panel which is second to none regarding adjustment possibilities and safety features. Air filter Electric heating coil Cooling coil for direct expansion with thermostatic expansion valve High pressure V-belt driven centrifugal fan with external motor Hermetic scroll compressor Easy cleanable shell and tube condenser for seawater Automatic seawater regulating valve (optional) Control panel with all necessary equipment for accurate temperature and operational safety control Optional vibration dampers (recommended) The control comprises the following functions: Start and stop of fan; control of heating capacity in 7 steps including safety thermostats; step-less control of cooling capacity via automatic hot-gas bypass and start and stop of compressor motor. The heating and cooling is controlled in sequence and with outside compensation to maintain the required supply air temperature inserted at the operator panel. The SCU-W series consists of the SCU-W-37 and SCU-C-56. See below for details. All internal piping and wiring is installed from factory and the unit is ready for operation when Marine Self-Contained A/C Unit Type SCU-W 3

5 Capacities SCU-W-37 SCU-W-56 Type 50 Hz 60 Hz 50 Hz 60 Hz Airflow m 3 /s Air external static pressure Pa Cooling capacity kw Heating capacity kw Fan motor power consumption kw Compressor motor power consumption kw Cooling water flow rate m 3 /h Cooling water pressure loss mbar ISO conditions: Outside: 35 o C / 70% R.H., Inside: 27 o C / 50% R.H. Room supply temp.: 17 o C, Evaporation temp.: 5 o C, Condensing temp.: 43 o C, seawater temp.: 32 o C, Refrigerant R404A. Other refrigerants: R22, R134A, R407C, R507A Dimensions L W H H1 H2 X ØD Y Ød Weight Type mm mm mm mm mm mm mm kg SCU-W SCU-W Marine Self-Contained A/C Unit Type SCU-W

6 Construction The casing of the SCU-W consists of a sheet steel framework covered with double skinned sheet steel panels with an intermediate layer of 50 mm mineral wool. heating elements are controlled by relays from the control panel. Surface Treatment All surfaces of the SCU-W are coated with Alu- Zinc which lasts 3-4 times longer than hotdipped galvanised steel in marine environments. Acoustic and Thermal Insulation The casing has excellent acoustic and thermal insulation. The coefficient of heat transfer is 0.6 W/ (m 2 K). Air Tightness The self contained-units type SCU-W meets the requirements for class A according to Eurovent standard EN Position Designations The position of the SCU-W self-contained units refers to the direction of airflow through the unit seen from the access side (where doors are located): Pos. R: Airflow direction from left to right Pos. L: Airflow direction from right to left Filters The SCU-W contains a EU-4 quality plan filter mounted in filter frames. The filter frames are easily accessible ensuring easy inspection and replacement of filter elements. Heating Coil The SCU-W is equipped with an electric heating coil with elements of stainless steel. The heating coil consists of 3 separate heating elements of different capacity giving a total of 7 different heating steps enabling accurate temperature control. The Cooling Coil The SCU-W is equipped with a cooling coil with thermostatic expansion valve for direct expansion of refrigerant from the compressor. The cooling coil consists of copper tubes with seawater resistant aluminium fins housed in a galvanised sheet steel frame. The cooling coil is equipped with a highly efficient drop separator to avoid entrainment of condensate droplets. The cooling coil and the drop separator are placed in a drip tray where the condensed water will be led to discharge through a water trap. The drip tray is operational at static inclination up to 5. Fan The SCU-W is supplied with a high pressure, double inlet centrifugal fan driven by a motor by means of a V-belt drive. Fan and motor are mounted on a common frame, which is suspended by means of anti-vibration mountings mounted onto a set of transverse rails. This construction enables service personnel to pull out fan and motor. Marine Self-Contained A/C Unit Type SCU-W 5

7 Compressor The SCU-W is equipped with a hermetic scroll compressor which ensures steady operation, high efficiency and low emissions of noise. The compressor is equipped with: Pressure lubrication Electrical heating element Safety valve Refrigerant filter/drier system Gauges for suction and discharge pressures Oil differential pressurestat High and low pressurestat Condenser The condenser is a cleanable, shell-and-tube condenser. The tubes are made of Cu-Ni enabling seawater cooling of the condenser. A seawater regulating valve can be installed (optional). Control System The SCU-W is equipped with a PLC-based control system comprising the following functions: Heating regulation in 7 steps Cooling regulation 0-100% step-less Outdoor compensation Fan control Compressor control Alarm system The control system ensures steady temperature regulation of the supply air as well as shut down and alarm in case of malfunction of compressor. The PLC display has 4 lines of 20 characters and control keys for manoeuvring, alarms, start and stop. 6 Marine Self-Contained A/C Unit Type SCU-W

Marine Self-Contained A/C Unit Type SCU-C The self-contained A/C unit type SCU-C is a compact unit specially designed for marine installation as air supply for single pipe air conditioning systems on

8 Marine Self-Contained A/C Unit Type SCU-C The self-contained A/C unit type SCU-C is a compact unit specially designed for marine installation as air supply for single pipe air conditioning systems on merchant ships. The SCU-C contains Air filter Cu/Al coils for heating with steam and cooling by direct expansion with electronic expansion valve High pressure V-belt driven centrifugal fan with external motor Semi-hermetic reciprocating compressor Easily cleanable shell and tube condenser for seawater or freshwater Automatic steam regulating valve Control panel and all necessary control equipment for accurate control of temperature and humidity as well as compressor safety control. Options Vibration dampers (recommended) Humidity: Steam pipes connecteed to steam generator (1 bar) Humidity: Steam pipes with spray nozzles connected to yard supply of pure steam (max. 4 bar) Heating: Heater for hot water (80 C) Heating: Heater for oil (200 C) Discharge section: No discharge section fan located with a horizontal air supply direction Discharge section: No discharge section fan locacted with a vertical air supply direction Galley: Cooling supply All internal piping and wiring is installed from the factory. The unit is ready for operation when connected to air ducts and electrical supply, as well as steam, hot water, or hot oil, and optionally cooling water. The SCU-C is equipped with a unique PLC-based control panel which is second to none with respect to adjustment possibilities and safety features. The control comprises the following functions: Start and stop of fan; control of heating capacity by automatically operated motor valve; control of cooling capacity from 2 and up to 6 steps and start and stop of compressor motor. The heating and Marine Self-Contained A/C Unit Type SCU-C 7

9 cooling are controlled in sequence and with outside compensation to maintain the required supply air temperature inserted at the operator panel. The SCU-C series consists of the SCU-C 100, SCU- C 140, SCU-C 160 and SCU-C 230 with 1x100% or 2x50% semi-hermetic reciprocating compressors. See below for details. Type SCU-C 100 SCU-C 140 SCU-C 160 SCU-C 230 Airflow m 3 /s Air external static pressure Pa Cooling capacity kw Heating capacity kw Fan motor power consumption kw x100% Compressor motor power consumption kw x100% Cooling water flow rate m 3 /h x100% Cooling water pressure loss mbar x50% Compressor motor power consumption kw x50% Cooling water flow rate m 3 /h x50% Cooling water pressure loss mbar ISO conditions: Outside: 35 o C / 70% R.H., Inside: 27 o C / 50% R.H. Room supply temp.: 17 o C, Evaporation temp.: 5 o C, Condensing temp.: 43 o C, Seawater temp.: 32 o C, Refrigerant R404A. Other refrigerants available on request Outlet Flow direction Inlet L1 W2 W1 L2 WD2 WD1 H1 H H2 HD X x ØD Control panel Connection for heating media Drain connection Connection for cooling water Dimensions L1 L2 H H1 H2 W1 W2 WD1 WD2 HD ØD Weight Type [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] X [mm] [kg] SCU-C SCU-C SCU-C SCU-C Marine Self-Contained A/C Unit Type SCU-C

Construction Casing The casing of the SCU-C consists of a seawater resistant Alu-Zinc coated sheet steel framework covered with double skinned seawater resistant Alu-Zinc coated sheet steel panels

10 Construction Casing The casing of the SCU-C consists of a seawater resistant Alu-Zinc coated sheet steel framework covered with double skinned seawater resistant Alu-Zinc coated sheet steel panels with an intermediate layer of 50 mm mineral wool. Position Designations The position of the SCU-C self contained units refers to the direction of airflow through the unit seen from the access side (where doors are located): Pos. R: Airflow direction from left to right Pos. L: Airflow direction from right to left The access side of the SCU-C is provided with panels and tight-fitting doors which are constructed as the panels. The end and side panels are fastened onto the frame by means of screws and are easily detachable. The top and bottom panels are fastened using pop-rivets. The doors are provided with a mechanically attached sealing strip, hinges, and a recessed tongue lock which is operated by means of an 8 mm square hole spanner supplied, or by means of a handle. The doors can be opened up to 90 o and are easily detachable in case opposite door opening position is required. Dampers The SCU-C is delivered with externally mounted dampers on the fresh air and the return air inlets. The dampers are of the louvre type with opposed damper blades. Surface Treatment As standard, all surfaces of the air handling unit are coated with seawater resistant Alu-Zinc which lasts 3-4 times longer than hot-dipped galvanised steel in marine environments. The damper blades are made of extruded seawater resistant aluminium and supported on nylon bushings in a galvanised sheet steel frame. The shafts are made of stainless steel. Other combinations of materials are available on request. Acoustic and Thermal Insulation The casing has good acoustic and thermal insulation. The coefficient of heat transfer is 0.6 W/(m 2 K). Air Tightness The self-contained units type SCU-C meets the requirements for class A according to Eurovent standard NE The dampers are normally operated manually but can be equipped with actuators for automatically operation. Filters The SCU-C contains an EU-2 / G-75 quality plan Alu filter mounted in filter units. The filter units are easily accessible ensuring easy inspection and replacement of filter elements. Marine Self-Contained A/C Unit Type SCU-C 9

Steam Humidification As an option, the SCU-C can be supplied with steam humidification equipment where high pressure steam is distributed by means of spray nozzles installed after the heating and the

11 Steam Humidification As an option, the SCU-C can be supplied with steam humidification equipment where high pressure steam is distributed by means of spray nozzles installed after the heating and the cooling coils. Alternatively, the SCU-C can also be supplied with steam generator where low pressure steam is distributed through steam pipes. Immediately behind the cooling coil, the SCU-C is equipped with a highly efficient drop separator to avoid entrainment of condensate droplets. The cooling coil and the drop separator are placed in a drip tray where the condensed water can be led to discharge at a fan suction pressure of up to 1200 Pa. Heating and Cooling Coils The SCU-C is equipped with a heating coil for externally supplied steam, hot water, or hot oil and a cooling coil for direct expansion of the refrigerant. The heating and cooling coils are both placed on the suction side of the fan and are supplied with different numbers of tubes and circuits depending on the heating media and heating and cooling requirements. The drain from the drip tray is supplied with a specially designed one-way valve. The valve is designed in such a way that no bad smelling air from the drain can be sucked into the air handling unit during dry spells when no condensed water is running out. Fan The SCU-C is supplied with a high efficiency, double inlet centrifugal fan driven by a motor by means of a V-belt drive. Fan and motor are mounted on an inner frame suspended by means of anti-vibration mountings in an outer frame which can be pulled out. The heating and cooling coils consist of copper tubes with seawater resistant aluminium fins housed in a stainless sheet steel frame. Other material combinations are available on request. The fan unit is mounted in two transverse rails fastened to the air handling unit, and the fan outlet opening is connected to the discharge panel of the unit by means of a flexible connection. The heating medium is supplied and discharged through flanged connections at the end of the SCU-C. The expansion valve(s) and the temperature and pressure sensors for the cooling circuit are installed from factory as well as all piping in the cooling circuit. 10 Marine Self-Contained A/C Unit Type SCU-C

PLC-based control system comprising the following functions: In order to ensure long and reliable operation, the compressor is equipped with: Automatic 2 and up to 6 steps capacity regulation

12 Compressor The SCU-C is equipped with a semihermetic reciprocating compressor. Refrigerant filter/drier system is included and provides: Liquid refrigerant drier Liquid sight glass with moisture indicator Refrigerant charging valve Control System The SCU-C is equipped with a PLC-based control system comprising the following functions: In order to ensure long and reliable operation, the compressor is equipped with: Automatic 2 and up to 6 steps capacity regulation Pressure lubrication with oil strainer Oil pressure safety control Electrical heating element in crank case Manual suction and discharge isolation valves High and low pressurestat Condenser The condenser is an easy cleanable shell-and-tube condenser. The tubes are made from Cu-Ni which is resistant to seawater. The shell and the tube plates are made from steel and the end covers are made from cast iron. Shell plates and end covers are plastic covered. Heating regulation Cooling regulation Humidity regulation (optional) Outdoor compensation Fan control Compressor control Safety shut-down and alarm system The control system ensures steady temperature and humidity regulation of the supply air as well as shut down and alarm in case of compressor malfunction. The heating regulation is performed by means of a PLC-controlled, electrically operated globe valve. The cooling regulation is performed by means of one or two PLC-controlled electrically operated expansion valves. The humidity regulation is performed by means of a PLC-controlled solenoid valve. The PLC has a 6x8 cm touch display with mimic for manoeuvring, alarms, start and stop. Marine Self-Contained A/C Unit Type SCU-C 11

13 12 Marine Self-Contained A/C Unit Type SCU-C

14 MU Novenco develops and manufactures ventilation and fire fighting systems that are marketed and distributed world-wide through subsidiaries and agents. The company was founded in Denmark in 1947 and has become one of the world-leading suppliers. Novenco symbolises quality and environmentally friendly products. The company is certified according to ISO 9001 and ISO The headquarters of Novenco is located in Naestved, Denmark. Novenco, Hi-Pres and XFlow are registered trademarks of Novenco. Read more about Novenco on Novenco A/S Industrivej Naestved Denmark Phone Fax

Hi-Pres Cooling Products Catalogue. Product Catalogue

Hi-Pres Cooling Products Catalogue Product Catalogue Important Notice This document is provided As is and is subject to change without prior notice. Novenco A/S reserves this right due to continuous product