Group-1 Agitators. Group-2 Air Conditioning Plant. Group-3 Air Handling Plant / Air Pressurisation System. Group-4 Belts (Conveyor, V & Wedge Belts)

TECHNICAL SPECIFICATIONS

. MOL Group TECHNICAL SPECIFICATIONS MECHANICAL List of booklets MGS - M - REF M LI Rev 1.00.00 This document is property of MOL Group. The use is only allowed with the written permission of MOL Group.

Nikita Engineers, Vadodara

+91-8071683128 Nikita Engineers, Vadodara https://www.indiamart.com/nikitaengineers/ Service provider in the field of Water/Waste Water Treatment & Sewage Treatment Plants. Supplier & Exporter of Industrial

the product and service handbook.

about us. Energy Products Oilfields Equipment LLC was established with the objective of providing quality equipment, products and services to Oil and Gas, Petrochemical and Utilities industries within

STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD

PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

Ball Float Controlled. Thermo Dynamic(TD) Trap Safety Valve Condensate Pump Flash Vessel Moisture Separators Deaerator Head Steam Injector Sight Glass

Product of Quality Best Performance Ball Float Controlled Steam Traps Auto Drain Traps Float Valve Air Vent Valves Feed Control Valve Drain Control Valve Thermo Dynamic(TD) Trap Safety Valve Condensate

SECTION HEATING AND AIR CONDITIONING PIPING SYSTEMS. A. Provisions of Division 01 apply to this section. 1. Chilled Water System.

SECTION 15180 PART 1 - GENERAL 1.01 SUMMARY A. Provisions of Division 01 apply to this section B. Section Includes: Providing complete piping systems for heating, ventilating, and air conditioning systems

Integrated Industrial Solutions

Integrated Industrial Solutions melschire Automation Technologies LLC Umm Al Quwain UAE, Post Box: 4874. Tel: (00971 6 ) 7681017, Mob: 00971 55 4361078, Fax : (00971 6) 7681027. www.melschire.com. Email:

Essex County College - West Essex Campus Addition And Renovations dib # / SECTION HYDRONIC PIPING SPECIALTIES PART 1- GENERAL

Essex County College - West Essex Campus Addition And Renovations dib # 54292 / 11-14 SECTION 232116 - HYDRONIC PIPING SPECIALTIES PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions

C. B. Trading Corporation

+91-8048737256 C. B. Trading Corporation http://www.cbtc.in/ C. B. Trading Corporation is an eminent distributor and trader of a wide range of s, Pipe Fittings, Forged Carbon Steel and Water & Steam Flow

SECTION COMPRESSED AIR SYSTEM. A. Pipe and pipe fittings, including valves, unions and couplings.

SECTION 15481 COMPRESSED AIR SYSTEM PART 1 - GENERAL 1.1 SECTION INCLUDES A. Pipe and pipe fittings, including valves, unions and couplings. B. Air compressor. C. After cooler. D. Refrigerated air dryer.

D-11 OUTLINE SPECIFICATION FOR HTHW (ABOVE GRADE) HYDRONIC PIPING

D-11 OUTLINE SPECIFICATION FOR HTHW (ABOVE GRADE) HYDRONIC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions

We are pleased to offer products covering a multitude of SIC Code categories:

We are pleased to offer products covering a multitude of SIC Code categories: Mechanical Power Transmission Equipment 3010 Torque Converters and Speed Changers 3020 Gears, Pulleys, Sprockets, and Transmission

Locations Include: Food & Beverage. Chemical. Waste Water Treatment. Pulp & Paper. Energy, Oil & Gas

Locations Include: Memphis, TN Jackson, TN Little Rock, AR Springdale, AR Tupelo, MS Food & Beverage Chemical Waste Water Treatment Pulp & Paper Energy, Oil & Gas 1721 Corporate Avenue Memphis, TN 38118

HEAT EXCHANGE IN GENERAL

XXXX F28 HEAT EXCHANGE IN GENERAL Note(s) (1) In this class, the following expressions are used with the meanings indicated: heat exchange means the heating or cooling of a fluid or fluent solid by direct

PIPING SYSTEM EQUIPMENTS

PIPING SYSTEM EQUIPMENTS Introduction Equipments are devices that provide power, process and store materials. Equipments in piping systems depend on the specific industries using them. Specialized equipment

D-8 OUTLINE SPECIFICATION FOR HTHW HEAT EXCHANGERS

D-8 OUTLINE SPECIFICATION FOR HTHW HEAT EXCHANGERS GENERAL: This document provides performance requirements and guideline information for Heat Exchanger equipment for Colorado College only, and is not

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y Standard Pumps Manufacturing Plants Today Ruhrpumpen is a worldwide company, with a network of global manufacturing plants in different countries and

Hatfield and Company is a distributor and manufacturer s representative of leading technical products and solutions that help our customers improve efficiency and quality, and save money. We specialize

ETP Series - Self Priming Pumps

ETP Series - Self Priming Pumps ETP SERIES Decades of experience in development & manufacturing of injection Moulded Polypropylene Corrosion Resistant Pumps. Design philosophy is to design pumps that are

GALWAY TRADING. P.O. BOX: SHARJAH UNITED ARAB EMIRATES TEL: ; FAX:

GALWAY TRADING P.O. BOX: 31851 SHARJAH UNITED ARAB EMIRATES TEL: +971 6 5616948; FAX: +971 6 5616948 E-MAIL: galwaytr@gmail.com, galwaytr@eim.ae GALWAY TRADING is a dynamic and enthusiastic professional

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog More Than 60 Years Developing The Pumping Technology That Drives Progress Engineering Excellence Ruhrpumpen is an innovative

PT15 MATERIAL : DIMENSIONS - Nominal in inches. AVAILABLE SPARES: Disc (Packet of 5) ORDERING INFORMATION: Refer to "HOW TO ORDER" page.

PT5 Thermodynamic Steam Traps MATERIAL : No. PART MATERIAL QTY. (Nos.). BODY ASTM A743 Gr. CA 40 0 (Seat Hardened) (Cast Equiv. AISI 420) 2. DISC CAP ASTM A743 Gr. CA 40 0 (Cast Equiv. AISI 420) 3. DISC

Filtering Ideas, Making Innovations

Filtering Ideas, Making Innovations Company WHO WE ARE Apexfil is a company whose technology was developed for perfect performance in filtration market for hydraulic lubrication systems, refrigeration,

DESIGN STANDARDS SECTION 15600

PART 1 - GENERAL 1.1 Work included: A. Piping, tubing and fittings. B. Piping specialties. C. Special duty valves. D. Refrigerants. E. Chillers. F. Refrigerant monitors. 1.2 General requirements: A. Reciprocating

PRODUCTS. Expansion Joints Fire Fighting. Flexible Metal Hoses. Equipments. Insulation Solutions. Steam. Valves. Level Control.

PRODUCTS Expansion Joints Fire Fighting Equipments Flexible Metal Hoses Steam Equipments Valves Level Control Insulation Solutions VALVES FLEXIBLE METAL HOSES EXPANSION JOINTS LEVEL CONTROL EQUIPMENTS

+91-8048603484 Mevadhashma http://www.mevadhashma.in/ Owing to our years of experience, we are manufacturing, supplying and exporting a wide range of Power Plant Spare Parts such Boiler Spare Parts, Electrostatic

DIVISION 15 MECHANICAL

DIVISION 15 MECHANICAL A. GENERAL DESIGN CONDITIONS 1. Design occupied spaces to maintain 72 F and a space dew point temperature not to exceed 55 F. 2. Design classroom and office space buildings with

1. Raw Material Handling: 2. Roaster Furnace: 4. Waste Heat Boiler: 5. Boiler Chain Conveyors:

1. Raw Material Handling: The concentrate storage capacity is 40,000 MT and day bins are having 3 x 400 MT capacity. 2. Roaster Furnace: The Roaster is having 77 Sqr.Mtr hearth area of M./s Lurgi make

RESEARCH AND TECHNOLOGY BUILDING RENOVATION 05/18/09 SECTION REFRIGERANT PIPING AND SPECIALITIES

SECTION 23 23 00 REFRIGERANT PIPING AND SPECIALITIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Refrigerant piping. 2. Unions, flanges, and couplings. 3. Pipe hangers and supports. 4. Refrigerant

LEAD RECYCLING PLANT. Battery Machine Manufacturers: Since 1989

Battery Machine Manufacturers: Since 1989 LEAD RECYCLING PLANT We provide TURNKEY SOLUTIONS for used lead-acid battery recycling that includes, Project Feasibility studies, Specification developments,

Handling Equipment & Dedusting

Handling Equipment & Dedusting Chain Conveyors Improved design Chain conveyor Purpose A chain conveyor is designed for the handling and extracting of granular and powdery products over a sloped, horizontal

PhiloWilke Partnership Addendum No. 2 A/E Project No April 2016

SECTION 23 21 23 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section.

Jet Compressors. Circulate Steam Boost Low-Pressure Steam Compress and Mix Gases in Desired Proportion

s Circulate Steam Boost Low- Steam Compress and Mix Gases in Desired Proportion S&K s are used in the process, paper, petroleum, power, gas, and other industries to circulate steam, boost low-pressure

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS

PART 0 A/E INSTRUCTIONS 0.01 Design Requirements A. Pumping system design 1. A primary-secondary pumping system is preferred. Redundant pipes are required for chillers and boilers. 2. Select pumps to operate

ANNEX A-1 GEOTHERMAL UNITS INDEX TO SYSTEM/COMPONENT CAUSE CODES BOILER BALANCE OF PLANT STEAM TURBINE GENERATOR MISCELLANEOUS - GEOTHERMAL EXTERNAL

ANNEX A-1 GEOTHERMAL UNITS INDEX TO SYSTEM/COMPONENT CAUSE CODES Boiler Piping System 0500-0620 Condensing System 3110-3199 Circulating Water Systems 3210-3285 Waste Water (zero discharge) 3290-3299 Condensate

A. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals.

SECTION 23 21 23 - HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

Operating Performance

INFORMATION SHEET 1 Jackson Engineering Advisers are specialist Building Services Engineers. This information sheet is offered as an aid to Building Owners and Managers as a guide to plant life expectancies.

Remeha. Fuel oil/gas boilers P 520. Installation and Service Manual A

Remeha Fuel oil/gas boilers EN Installation and Service Manual 300016859-001-A 63115 Declaration of conformity The appliance complies with the standard model described in declaration of compliance. It

64 Beverage dispensing

The German Patent Classification, Class 64 Page 1 64 Beverage dispensing 64a 64b 64c Bottles and their closures, closure-connected opening devices, containers for preserves, cans and opening devices combined

Installation of Glass Lined Equipment

Installation of Glass Lined Equipment Information given herein is for guidance only and may not be complete. It is important that only trained and competent personnel are permitted to handle glass lined

THE JAMES RUSHTON EARLY LEARNING AND FAMILY SUCCESS CENTER #2616 ISSUE FOR CONSTRUCTION

SECTION 21 1301- FIRE-SUPPRESSION SYSTEMS PART 1 - GENERAL 1.1 SUMMARY: A. This Section includes fire-suppression piping and equipment for the following building systems: 1. Wet-pipe, fire-suppression

Our Know-How. Your Peace of Mind. Steam Solutions

Our Know-How. Your Peace of Mind. Steam Solutions Steam Solution Know-How Our team of specialists have years of experience in planning and engineering. This knowledge, combined with our valuable manufacturer

Industrial Processing Solutions

Industrial Processing Solutions Fluid power, filtration, and roll cleaning products. Innovative products and technologies. Rotating Unions & Accessories Rotary unions for water and air service ( 3 8 to

PRODUCT OVERVIEW. or other secondary operations using a high velocity, high impact air stream.

AIR KNIFE SYSTEMS PRODUCT OVERVIEW REPUBLIC AIR KNIFE SYSTEMS are engineered, manufactured and tested to provide 99.9% of liquid, dust, and debris removal from products prior to labeling, ink jet laser

Table of contents ASTRO

Table of contents Table of contents... 2 01. Labelling systems... 3 02. Ship search headlight drive... 3 03. Wood-pellet furnace drive... 4 04. Pellet-screw conveyor from the store... 6 05. Path edge control...

YARWAY PROCESS THERMODYNAMIC STEAM TRAPS SERIES 40/40D AND C250/260

SERIES 40/40D AND C250/260 Designed for a variety of high pressure and high capacity applications found in utility, industrial and marine service FEATURES Designed to fail open. Designed for superheat

+91-8048113053 Mach Power Point s India Private Limited http://www.powerpointpumps.net/ Our firm was incepted with an aim to trade, supply, export and wholesale in the s Industry which serves the basic

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y VTP. Vertical Turbine Pump

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y VTP Vertical Turbine Pump For more than 60 years the name Ruhrpumpen TM has been synonymous worldwide with innovation and reliability for pumping technology

SECTION BASIC MATERIALS AND METHODS

SECTION 15050 BASIC MATERIALS AND METHODS PART 1 1.1 SECTION INCLUDES A. General Conditions B. Supplementary Conditions C. Division 1 D. Mechanical basic requirements E. Electric Motors F. Pipe, Valve,

1.1 This section applies to air handling units for HVAC Systems.

AIR HANDLING UNITS GENERAL INFORMATION 1.1 This section applies to air handling units for HVAC Systems. DESIGN REQUIREMENTS 2.1 Design Criteria a. The decision to use modular central station air handling

DOCUMENT TABLE OF CONTENTS

DOCUMENT 00003 June 16, 2005 TABLE OF CONTENTS DOCUMENT NO. INTRODUCTORY INFORMATION DOCUMENT 00003 TABLE OF CONTENTS DIVISION 1 GENERAL REQUIREMENTS SECTION 01011 SECTION 01025 SSP21.1-1 SECTION 01026

Water Fuel + Air for combustion Blowdown

Water 1. Going through a water treatment system 2. Condensate is re-used & will be mixed with fresh water in deaerator 3. Mixture of this water is sent to a heat exchanger inside the boiler chimney (Economizer)

ASSSIGNMENT 3. Textbook Assignment: Boilers, chapter 4, pages 4-1 through 4-15, and Steam Turbines, chapter 5, pages 5-1 through 5-1.

ASSSIGNMENT 3 Textbook Assignment: Boilers, chapter 4, pages 4-1 through 4-15, and Steam Turbines, chapter 5, pages 5-1 through 5-1. 3-1. What is the function of a boiler in the steam cycle? 1. To convert

TMCI Padovan Evaporators

TMCI Padovan Evaporators Evaporators Our range includes 4 types of evaporators: Forced Circulation Falling Film Evaporators Plates Thin Film Concentration systems Evaporator choosing criteria: product

Model 601CRD Oil Burner

Model 601CRD Oil Burner Installation and Operating Instructions For Use By Qualified Service Technicians Only CRD burners feature a combustion head incorporating a new design concept which provides a means

Tel Group

www.wamechsi.com Tel +27 12 808 0682 sales@wamechsi.com VERTICAL SHAFT, LOW SPEED, AERATORS Technical Specifications Vertical shaft, low speed aerators are ideal for the bacterial oxidization of effluent

Industrial. Solutions brands you trust. Product Overview

Industrial Solutions brands you trust. Product Overview Industrial Pump Applications Crane & Systems design s the most efficient and economical pumps to serve the large diversity of industrial applications

Reliance Fire Protection Systems

+91-8048075998 Reliance Fire Protection Systems https://www.indiamart.com/reliance-fire-protection/ Reliance Fire has been named Licensed Agency for the purposes of Fire Protection & Life Safety Measures

Jenroll EXPress Optimized evaporation capacity for integrated finishing lines

Jenroll EXPress Optimized evaporation capacity for integrated finishing lines PADDING LINEN CARBON STEEL / INNER PLATE STEAM FLOW STEAM HOOD The flexible chest The flexible chest consists of a lot of small

Suction Pads for Packaging

The Flexible Gripper Solution for a Wide Variety of Bags Dynamic and reliable handling of bags regardless of packaging material, goods and filling degree - the new bag suction pad SBP4f masters these tasks.

Keller USA, Inc. Filtration of emissions. Capturing & extraction of process emissions. Return of clean air

Keller USA, Inc. Capturing & extraction of process emissions Filtration of emissions Return of clean air Dust Collection solution for dry dust filtration VARIO eco Modular design KLR-Filter, or Dry-P cartridge

TITLE: SPECIFICATION NO. PE-MSE-VD-ACC VOLUME:

(For Vendor Registration Purpose) SHEET 1 of 6 1.00.00 GENERAL INFORMATION 1.01.00 The general guidelines as illustrated in the subsequent clauses of this section shall be applicable for air cooled condenser

10.6 Schedule of Accreditation

Inspection Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment requirements for the operation of various

COGEIM COGEIM EQUIPMENT MAINTENANCE AND REFURBISHMENT A NECESSARY CHOISE Number 1 filter-dryer supplier in the world

COGEIM Number 1 filter-dryer supplier in the world COGEIM EQUIPMENT MAINTENANCE AND REFURBISHMENT A NECESSARY CHOISE WWW.3V-TECH.COM 3V-TECH SERVICES AFTER-SALES DIVISION PREVENTIVE MAINTENANCE EMERGENCY

BASIL 6000 TUNNEL CAGE WASHER

BASIL 6000 TUNNEL CAGE WASHER APPLICATION For thorough, efficient cleaning of cages, debris pans, bottles, feeder bowls, and miscellaneous items used in the care of laboratory animals. DESCRIPTION The

University of Delaware

SECTION 23 21 23_HYDRONIC PIPING SYSTEMS ABOVE GRADE PART 1 GENERAL 1.1 SUMMARY University Contact: Energy & Engineering Group (302) 831-1744 This standard includes hydronic piping requirements for both

Cyrus Reclaimer & Engineering Services Private Limited

+91-8048601244 Cyrus Reclaimer & Engineering Services Private Limited https://www.indiamart.com/cyrus/ We are engaged in manufacturing and supplying a wide range of Wire rope slings, chain & lifting tackels.

Module 7: Air Supply System

Terms and Definitions Components of the Air Supply System Basic Functions of the Air Supply System Parts of a Compressor Characteristics of Compressors Loading and Unloading Process Characteristics of

Dust Collectors. Unique Design & Engineering Approaches for Dust Collection and Pneumatic Conveying

Dust Collectors Unique Design & Engineering Approaches for Dust Collection and Pneumatic Conveying AIR CLEANING EQUIPMENT, INC. (800) 962-0650 www.aircleaningequipment.com CAMCORP Inc. Established in 1993,

Introduction to Control Technology

Chapter 13 Introduction to Control Technology Introduction to Control Technology Carbon adsorption Incineration Condensation Bioreaction Carbon Adsorption 13-1 Activated Carbon A class of materials Produced

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING

SECTION 221123 - DOMESTIC WATER PUMPS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following all-bronze and bronze-fitted centrifugal pumps for domestic cold- and hot-water circulation: 1.

Appendix B9 Geothermal Unit Cause Codes

Appendix B9 Geothermal Unit Cause Codes GEOTHERMAL UNITS INDEX TO SYSTEM/COMPONENT CAUSE CODES (Unit Codes 800 899) Cause Code BOILER Ranges Page No. Boiler Piping System 0500-0620 B-GE-2 BALANCE OF PLANT

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y LS BARGE PUMP. Vertical high-flow pump

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y LS BARGE PUMP LS BARGE For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog Ruhrpumpen offers a wide range of standard pump designs and sizes providing energy efficient solutions for the vast majority

The equipment and materials shall be designed and constructed in accordance with the ASME code section I 2001 ED A02 and Chinese Standards.

Steam Boiler Type S50-3.82/450 Traveling grate stoker 50t/h x 3.82 pa x 450 Degree C 1. Basic use of the boiler The boiler can be used for industrial power generation, or thermal power station for enterprises

Flow Control for Fire Protection

Flow Control for Fire Protection Valve Solutions From An Industry Leader AmesFireWater.com Count on the Fire Protection Leader for Reliable Flow Control Solutions Ames provides a range of high-quality

WASHER/DRYER CONTROL PANEL PARTS For Models: LTE6234DQ5, LTE6234DT5 (Designer White) (Biscuit)

WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions 8577199 English 3397634 Arabic Use & Care Guide 8578179 English 3405528 Arabic 8542752 Sheet, Cycle

Flow Control for Fire Protection

Flow Control for Fire Protection Valve Solutions From An Industry Leader AmesFireWater.com Count on the Fire Protection Leader for Reliable Flow Control Solutions Ames provides a range of high-quality

PARTS STOCKED REPLACEMENT FAUCET BIBB SCREWS... SCREW ASSORTMENT MISC. 3 /8" BIBB LOC SCREW 1 /2" BIBB SCREW 1 /2" BIBB LOC SCREW 3 /8" BIBB SCREW

January 1, 2001 STOCKED REPLACEMENT FAUCET BIBB SCREWS... Parts-5L 3 /8" BIBB SCREW 6-32 GAUGE CHROME 35138- No. 1 3 /8" BIBB SCREW 10-24 GAUGE CHROME 35153- No. 16 3 /8" BIBB SCREW 8-32 GAUGE CHROME 35141-

Math & Physics. Complete combustion requires an Air-FuelRatio of 14.7 to 1 for combustion.

Plant OPS Math & Physics Complete combustion requires an Air-FuelRatio of 14.7 to 1 for combustion. Math & Physics Increasing oxygen levels by 9 to 15% improves boiler efficiency. Math & Physics Draft

SECTION AUTOMATIC SPRINKLER PIPING

SECTION 15330 AUTOMATIC SPRINKLER PIPING ****** ***** **** *** ** * ** *** **** ***** ****** NOTE TO SPECIFIER: This section contains several types of automatic sprinkler piping. Some piping is allowed

Screens. SKE Spiraline Fine Screen - SCC. Quality Guaranteed Customer Satisfaction. Operation

SKE Spiraline Fine Screen - SCC 1. Screenings are captured by the C shaped screening basket and elevated up by the shaftless spiral. This spiral is also fitted with screen cleaning brushes, which ensure

GRP Ducting and Glass Tube Heat Exchanger Installation

2 GRP Ducting and Glass Tube Heat Exchanger Installation Don Valley Maltings Division Don Valley Engineering is the leading UK provider of Process Plant and Support to the Malting Industry, and the only

INSTALLATION INSTRUCTIONS

,t_2007 Lennox Industries Inc. Dallas, Texas, USA INSTALLATION INSTRUCTIONS CH33 Series Units EVAPORATOR 505,264M (65484504) 10/07 Supersedes 09/06 COILS n _putech blications ical Litho U.S.A. RETAIN THESE

Gonzales Office 2718 S. Ruby St. Gonzales, LA fax

Hatfield and Company is a distributor and manufacturer s representative of leading technical products and solutions that help our customers improve efficiency and quality, and save money. We specialize

1 of 68. Thong Fatt Jaya Machinery Hardware Sdn. Bhd. DOUBLE-STAGE LIQUID RING VACUUM PUMP. Air- Operated Double Diaphragm Pump TW Series

Thong Fatt Jaya Machinery Hardware Sdn. Bhd. DOUBLE-STAGE LIQUID RING VACUUM PUMP Air- Operated Double Diaphragm Pump TW Series STLONG VARIABLE SPEED BOOSTER PUMP SYSTEM & EQUIPMENT 1 of 68 Fire-Fighting

Government Gazette Staatskoerant

Government Gazette Staatskoerant REPUBLIC OF SOUTH AFRICA REPUBLIEK VAN SUID AFRIKA Regulation Gazette No. 10177 10701 Regulasiekoerant Regulation Gazette Vol. 621 24 March Maart 2017 No. 40713 PART 1

GAS COMPONENTS ELECTRIC COMPONENTS WATER TECHNOLOGY MECHANICAL COMPONENTS TOOLS. Spare parts suitable for LA CIMBALI

GAS COMPONENTS ELECTRIC COMPONENTS WATER TECHNOLOGY MECHANICAL COMPONENTS TOOLS Spare parts suitable for LA CIMBALI LA CIMBALI heating elements heating elements heating elements for coffee machine No.

EQUIPMENT LIST gallon Pfaudler glasteel jacketed reactor rated at 90psi/FV. Variable frequency drive agitator, 200 ft 2 Graphilor condenser.

PALM BAY Primary Process Equipment 2000 GL 1500 GL 1500 GL 2000 gallon Pfaudler glasteel jacketed reactor rated at 90psi/FV. Variable frequency drive agitator, 200 ft 2 Graphilor condenser. 1500 gal Pfaudler

WASHER/DRYER CONTROL PANEL PARTS For Model: MET3800TW2 (White)

WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts W10222378 Installation Instructions W10196552 Use & Care Guide W10117755 Sheet, Cycle Feature W10114285 Wire Diagram 2 3390688

6-30 Vertical Deep Well. Close Coupled Vertical Turbine Submersible Turbine. Pump Type. Application. Description. Materials

A GORMAN-RUPP COMPANY Pump Type 6-30 Vertical Deep Well Close Coupled Vertical Turbine 6-30 Submersible Turbine Application Agricultural Irrigation, Municipal Water Supply, Industrial Process Water, Golf

2.2 Drawing and Parts List

2.2 Drawing and Parts List 2.2.1 Structural Drawing (SHD-20U~750U) Names of Parts: 1. Main switch 2. Insulated layer 3. Blower 4. Material storage tank 5. Electric heating box 6. Control box 7. Overheat

VUD. Vac-U-Dry Vacuum Dehydrators. hyprofiltration.com/vud

VUD Vac-U-Dry Vacuum Dehydrators The optimized balance between heat, vacuum, process design and an easy, user friendly operating system for removal of water and particulate from hydraulic and high viscosity

The right trap for the right application.

The right trap for the right application. Whenever you re faced with a process application, it s not enough to just select any steam trap to solve your problem. Instead, remember to match your application

ECONOBOOST EB II & EB III Compact Water Booster

ECONOBOOST EB II & EB III Compact Water Booster The Stokvis EB II twin pump & EB III triple pump cold water booster units meet today s need for compact, reliable, high performance equipment with modest

SECTION SECTION DESIGN REQUIREMENTS

SECTION 26 09 SECTION 23 05 23 DESIGN REQUIREMENTS GENERAL DUTY VALVES GENERAL INFORMATION 1.1 This section applies to valves for hydronic and steam systems. DESIGN REQUIREMENTS 2.1 Design Criteria a.

Spare parts list ( ) SGV 6/5

Spare parts list (1.092-003.0) SGV 6/5 14.09.2016 www.kaercher.com EN Table of contents Order instructions SGV 6/5 (1.092-003.0) 4 Spare parts list SGV 6/5 (CUL) (5.973-516.0) 12 Control system SGV 6 (US/JP)

FM 517 San Leon, TX Toll Free: Office: (281) Fax: (281)

www.rbmosherco.com 5902 FM 517 San Leon, TX 77539 Toll Free: 1-800-444-2207 Office: (281) 339-3382 Fax: (281) 559-1152 E-mail: sales@rbmosherco.com R.B. MOSHER CO. has been in business since 1986, providing

Industrial Cleaning and Conditioning Systems

Industrial Cleaning and Conditioning Systems Innovative solutions for tough cleaning problems. Cleaning and conditioning products for industrial applications. Genesis Modular Shower Family Single-tube

ROTARY DRYER CONSTRUCTION

ROTARY DRYER The Rotary Dryer is a type of industrial dryer employed to reduce or to minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated