Laboratory glassware washing system

Transcription

1 Laboratory glassware washing system For the Environmentally conscious

2 Laboratory glassware washing system Steelco is at the forefront of innovation and technological progress in the Washer Disinfector area. In the last few years we have worked to become a major force for cleaning and disinfection in the healthcare, laboratory, lifescience and pharmaceutical sectors developing a complete range of reliable washer disinfectors and automations focused on high cleaning results and operator safety. Steelco Laboratory Glass Washers are at the forefront of knowledge and research, guaranteeing the user tested and consistently efficient washing results. > LAB 00 SC > LAB 00 CL hot air drying > LAB 00 DRS hot air drying > LAB DRYER > LAB 00 > LAB 0 Standard compliant Steelco Laboratory glassware washers comply with the European and UK guidelines on decontamination. EN 00-, EN , EN, directive 98//EEC, directive 0/9/EEC, directive 89//EEC and 9//EEC and 9/8/EEC.

3 For the Environmentally conscious Constant improvements and innovations lead Steelco products to run economically and reach a higher level of environment compatibility. Machines baskets, inserts and accessories whole Steelco laboratory glassware washer range offers to customers a large choice of machines, baskets and inserts all specifically designed to meet the different needs of the end user > LAB 80 > LAB 900 > LAB 000 double door pass through A complete range baskets, inserts, trays, complements

4 Control system Steelcotronic Control System, with its auto-diagnostic process, constantly monitors and displays current cycle status and alarms. It allows the operator to optimise the washing process and to personalise the programmes on the machine. Easy to manage, the touch control system with graphic colour LCD display can simplify the operator s job when using the machine. The glass panel can also guarantee the operator a better protection when selecting the cycle type. LCD Steelcotronic Control System The machine can be provided with a USB port that allows the download of historical cycle data and the software updating. USB port allows an easy paperless document flow, documents can be opened directly by common office applications. Key features - Up to four liquid dispensing systems are included for detergent dosing. - Three water connections are available: cold, warm and DI water. Between each phase of the cycle the water is drained and clean water is introduced for the following phase. Tank for pre-heated DI water is available, as optional. - Double wall construction and washing chamber insulation in order to reduce the heat loss and the power consumption. - Large capacity water softeners are available for a continuous supply of softened water. - Water purificator system available.

5 Cleaning effectiveness The Mechanical action is one of the main elements to assure an effective cleaning during the washing process. Steelco has customised the washing pumps and circuits of each model ensuring a high flow rate combined with the effective spray pressure of the water. Direct coupling system for various mobile injection washing carts. The washing chamber, the washing arms and the tank filters are made of high quality AISI L stainless steel (DIN.0). The washing chamber is provided with rounded edges in order to avoid any dirty areas that could allow the bacteriagrowth. The external cabinet is made of AISI 0 stainless steel (DIN.0). Water filtering system on three levels.

6 LAB 00 CL Underbench laboratory glassware washer with forced hot air drying Specially designed for installations with limited space, this model combines the washing and the air drying on two levels, normally seen on large machines. This new generation of compact laboratory glassware washers share the same technology of our high capacity equipment for significative improvements in terms of cleaning effectiveness, thermal disinfection and drying performances. The filtered forced air drying system with adjustable time and temperature setting, helps to ensure a complete drying, inside and outside, of all the glassware. Washing injection system and hot air drying on two levels Washing chamber Chamber volume ~ lt /. Gal Us Basket volume ~ lt / 9.89 Gal US Stainless steel door version Control panel Connections - LCD display control panel with 0 washing and thermodisinfection programs for laboratory glassware: 0 standard pre-programmed cycles and 0 additional, available for customization. - RS port dedicated for printer or PC connection to monitor and validate the washing cycles and/or the data storage. Full glass door version Control panel Connections - Soft touch full glass control panel with graphic colour LCD display. - 0 washing and thermodisinfection programs for laboratory glassware: 0 standard preprogrammed cycles and 0 additional, available for customization. - USB port on the front panel to allow the washing cycles data storage and/or the software updating. - RS port dedicated for printer or PC connection to monitor and validate the washing cycles and/or the data storage.

7 LAB 00 CL - Key features - Heavy washing pump to ensure a high flow rate combined with an effective spray pressure. - Filtered forced air drying system with adjustable time and temperature setting, helps to ensure a complete drying, inside and outside, of all the glassware. - The temperature of the washing and thermal disinfection phases are fully adjustable up to 9 C. The temperature is monitored by two independent sensors - The steam condenser prevents vapours from entering into the washing area. - The washing chamber, the washing arms and the tank filters are made of high quality AISI L stainless steel. - Two automatic liquid dispensers are provided. - The triple water filtering system captures residue, preventing their re-circulation and extending the pump life. Optional - Full glass door version - HEPA H air filter - Tank for pre-heated DI water (stand required) - rd Chemical dosing pump - External printer ST - Built in water softner - Extra power 8 KW to reduce cycle time - Ethernet connection (full glass door version only) Dimensions and connections Standard electrical connection (International) 00V/~+N/0Hz Optional electrical connection (North America)* 08V/~+N/0Hz - 0V/~/0Hz Power 00 W Pump power 0 W Noise db(a) Permitted room temperature + C/ F - +0 C/0 F Dryer blower up to 0 m /h - 98 ft /h Dryer heating 00 W * other electrical connections also available as optional Level positions 00mm/. 0mm/.80 0mm/.0 80 mm / mm / 8. 0 mm / 9.8 Wash cart with washing arm see note at page 80mm/. 0mm/. Stands and side cabinets Different models of 00mm/.8 wide side cabinets allow to hold: - Tank for pre-heated DI water (cabinet and laboratory glassware are manufactured as a single 900 mm wide unit) - Purification system for DI water - Up to four lt.. Gal US chemical containers. Stands improve ergonomics when the machine is not installed under counter. The 00mm/. height stands are equipped with doors for an easier storage access to chemicals and accessories. Stand is recommended if the machine is equipped with the tank for pre heated DI water.

8 LAB 00 SC Underbench laboratory glassware washer Specially designed for installations with limited space, this model is provided with a washing injection system on two levels, normally seen on large machines. This new generation of compact laboratory glassware washers share the same technology of our high capacity machine range for significative improvements in terms of cleaning effectiveness and thermal disinfection performances. Washing injection system on two levels Washing chamber Chamber volume ~ lt /. Gal Us Basket volume ~ lt / 9.89 Gal US Stainless steel door version LAB 00 SC Control panel Connections - LED display control panel with 0 washing and thermodisinfection programs for laboratory glassware: standard pre-programmed cycles and additional, available for customization. - RS port dedicated for printer or PC connection to monitor and validate the washing cycles and/or the data storage. Stainless steel door version LAB 00 SCL Control panel Connections - LCD display control panel with 0 washing and thermodisinfection programs for laboratory glassware: 0 standard pre-programmed cycles and 0 additional, available for customization. - RS port dedicated for printer or PC connection to monitor and validate the washing cycles and/or the data storage. Full glass door version LAB 00 SCL soft touch Control panel Connections - Soft touch full glass control panel with graphic colour LCD display. - 0 washing and thermodisinfection programs for laboratory glassware: 0 standard pre-programmed cycles and 0 additional, available for customization. - USB port on the front panel to allow the washing cycles data storage and/or the software updating. - RS port dedicated for printer or PC connection to monitor and validate the washing cycles and/or the data storage.

9 LAB 00 SC - Key features - Heavy washing pump to ensure a high water flow rate combined with an effective spray pressure. - The temperature of the washing and thermal disinfection phases are fully adjustable up to 9 C. The temperature is monitored by two independent sensors - The steam condenser prevents vapours from entering into the washing area. - The washing chamber, the washing arms and the tank filters are made of high quality AISI L stainless steel. - Two automatic liquid dispensers are provided. - The triple water filtering system captures residue, preventing their re-circulation and extending the pump life. Optional - Full glass door version LAB 00 SCL soft touch - rd Chemical dosing pump - Tank for pre-heated DI water (stand required) - Extra power 8 KW to reduce cycle time - External printer ST - Built in water softner - Ethernet connection (full glass door version only) Dimensions and connections LAB 00 SC LAB 00 SCL Standard electrical connection (International) 0V/~/0Hz 00V/~+N/0Hz Optional electrical connection (North America)* 08V/~+N/0Hz - 0V/~/0Hz 08V/~+N/0Hz - 0V/~/0Hz Power 00 W 00 W Pump power 0 W 0 W Noise db(a) db(a) Permitted room temperature + C/ F - +0 C/0 F + C/ F - +0 C/0 F * other electrical connections also available as optional Level positions 00mm/. 0mm/.80 0mm/.0 80 mm / mm / 8. 0 mm / 9.8 Wash cart with washing arm see note at page 80mm/. 0mm/. How to combine optionals choosing the right configuration A B = allowed function stand cabinet left or right side 900mm machine cabinet on right side only stand + 900mm machine cabinet on right side only comb. comb. comb. comb. comb. comb. comb. comb. 8 comb. 9 pre-heating tank A B chemical storage B B purification system A th dosing pump B integrated printer A A 9

10 LAB 00 DRS - Laboratory glassware washer Lab 00 DRS is equipped with filtered forced air drying system, a dosing system as well as an integrated detergent compartment, in a space of only 90cm /. installation width easily accessible for operator and service. Washing and air drying on two independent levels are standard features of the machine. Complements Machine configured with stand, boiler to pre-heat DI water and glass door. HEPA Filter The lateral compartment allows easy operator and maintenance access to the HEPA filtered drying system and to the chemical dosing system. Washing chamber Chamber volume lt /. Gal Us Basket volume lt / 9.89 Gal US X Washing injection system and air drying on two levels Level positions 80 mm / mm / 8. 0 mm / 9.8 Wash cart with washing arm see note at page

11 LAB 00 DRS - Key features - Forced air drying system with adjustable time and temperature setting, helps to ensure completely dry, inside and outside, of all the glassware. - RS port is provided with printer connection for monitoring and validating washing phases. - LCD display and availability of 0 programs for laboratory glassware. - Telescopic bearing rails enable easy and safe loading/unloading of the glassware. - Washing and DI disinfection temperature are fully adjustable up to 9 C/99 F. Temperature is monitored by two independent sensors. - Standard steam condenser helps to eliminate vapors from entering into the laboratory. - Heavy washing pump ensures high flow rate combined with effective spray pressure. - Washing injection system and drying on two levels. - Inner cabinet, washing arms and tank filters made of high quality AISI L stainless steel. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Two automatic liquid dispensers are standard. One more dispensers is available. - Steelco LAB 00 DRS accepts a variety of interchangeable standard and injection baskets used even in LAB 00. Main optional features - rd Chemical dosing pump - HEPA H air filter - Tank for pre-heated DI water (into fully dedicated side cabinet) - Stand - Extra power 8 KW - External printer ST - Built in water softner - Glass door Dimensions and connections Standard electrical connection (International) x00v/0hz Optional electrical connection (North America)* x08v/0hz or x0v/0hz Power 00 W Pump power 0 W Noise db(a) Permitted room temperature + C/ F - +0 C/0 F Dryer blower up to 0 m /h - 98 ft /h Dryer heating 000 W * other electrical connections also available as optional 900mm/. 00mm/. 00mm/.8 0mm/.80 80mm/. 0mm.9 min 00mm/.8 max 0mm/.9 0mm/9. 0mm. 0mm/0.0 0mm/.0 0mm/. 0mm 9. 0mm/9. ø 0mm.9 00mm.9 8 mm. mm.9 mm. 0mm/8.0 0mm/. 0mm/8. 0mm/. 0mm/0. 0mm/.0 Warm water connection ¾ male DN 0 mm Cold water connection ¾ male DN 0 mm Demineralized water connection ¾ male DN 0 mm Chamber breather pipe Ø 0 mm /.9 8 Electrical connection Steam condenser drain Ø mm / 0.98 Machine drain Ø mm / 0.98 Cold water steam condenser connection ¾ male DN 0 mm

12 LAB 00 - Laboratory glassware washer LAB 00 front loading laboratory glassware washer features are the adjustable upper washing/drying levels and a powerful built-in HEPA filtered forced air drying system. The filtered forced air drying system with adjustable time and temperature setting, helps to ensure a complete drying, inside and outside, of all the glassware. Washing chamber Level positions Chamber volume ~00 lt /.8 Gal US Basket volume ~0 lt /.90 Gal US X 80 mm / mm / mm /.09 0 mm / mm /.0 Washing injection system and air drying operate on three levels. The upper level can be placed at two different water/air connections depending on the height of the loaded glassware. Wash cart with washing arm see note at page

13 LAB 00 - Key features - High visibility full glass door. - High safety and easy to use soft touch control system on glass panel with LCD color display to visualize cycle status. - 0 standard programs for laboratory glassware and 0 additional custom programs available for customization. - RS port for printer connection to monitor and validate washing phases. - Ergonomic design of the door level height allows to the user a convenient loading/unloading job with the support of a manual loading/unloading trolley. - Telescopic bearing rails enable easy and safe loading/unloading of the glassware. - Washing/drying injection system on three levels. - Inner cabinet, washing arms and tank filters made of high quality AISI L stainless steel. - Heavy washing pump ensures high flow rate combined with effective spray pressure. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Washing and DI disinfection temperature are fully adjustable up to 9 C/99 F. Temperature is monitored by two independent sensors. - Filtered forced hot air drying system with adjustable time and temperature setting, helps to ensure the complete inside and outside drying of all the glassware. - Standard steam condenser eliminates vapors from entering into the laboratory. - Two standard automatic liquid dispensers provided with level control. Two more dispensers are available. - Possibility to store up to three lt./. Gal US containers into the basement. - Steelco LAB 00 accepts a variety of interchangeable standard and injection baskets used also in LAB 0 models. Main optional features - rd and th Chemical dosing pump - HEPA H air filter - USB port - Ethernet connection - Built-in water softner - Boiler to pre-heat DI water (into fully dedicated bottom basement) - Light inside the chamber - Integrated printer ST Dimensions and connections Standard electrical connection (International) 00V/~+N/0Hz Optional electrical connection (North America)* 08V/~+N/0Hz or 80V/~+N/0Hz Power 80 W Pump power 0 W Noise db(a) Permitted room temperature + C/ F - +0 C/0 F Dryer blower up to 0 m /h - 98 ft /h Dryer heating 000 W * other electrical connections also available as optional 0mm 0.9 air flow breather air flow breather 8mm/. 0mm / mm /. 80mm /.8 mm.0 useful space 0mm /. 80mm /.,mm / 8. 0mm / mm / mm.9 00mm /. 0mm / floor drain 00mm.8 wall drain Warm water connection ¾ male DN 0 mm Cold water connection ¾ male DN 0 mm Demineralized water connection ¾ male DN 0 mm Chamber breather pipe Electrical connection Machine drain Ø 0 mm/. Ø 0 mm/.

14 LAB 0 - Laboratory glassware washer LAB 0 glassware washer is a larger model, frontal loading, with HEPA-filtered forced air drying, four washing/drying positions and three washing/drying levels. This machine can be used also to clean large bottles (0, 0, 0 lt./.8,.0,.8 Gal US). The filtered forced air drying system with adjustable time and temperature setting, helps to ensure a complete drying, inside and outside, of all the glassware. Washing chamber Chamber volume 0 lt /.0 Gal US Basket volume 0 lt / 8. Gal US X Washing injection system and air drying operate on four levels. The upper levels can be placed at different water/air connections depending on the height of the loaded glassware. Level positions 0 mm /.80 0 mm /. 0 mm /.8 0 mm / 8. 0 mm /.9 0 mm / mm / mm / mm / Wash cart with washing arm see note at page

15 LAB 0 - Key features - High visibility full glass door. - High safety and easy to use soft touch control system on glass panel with LCD color display to visualize cycle status. - 0 standard programs for laboratory glassware and 0 additional custom programs available for customization. - RS port for printer connection to monitor and validate washing phases. - Ergonomic design of the door level height allows to the user a convenient loading/unloading job with the support of a manual loading/unloading trolley. - Telescopic bearing rails enable easy and safe loading/unloading of the glassware. - Washing/drying injection system on four levels. - Inner cabinet, washing arms and tank filters made of high quality AISI L stainless steel. - Heavy washing pump ensures high flow rate combined with effective spray pressure. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Washing and DI disinfection temperature are fully adjustable up to 9 C/99 F. Temperature is monitored by two independent sensors. - Filtered forced hot air drying system with adjustable time and temperature setting, helps to ensure the complete inside and outside drying of all the glassware. - Standard steam condenser eliminates vapors from entering into the laboratory. - Two standard automatic liquid dispensers provided with level control. Two more dispensers are available. - Possibility to store up to three lt./. Gal US containers into the basement. - Steelco LAB 0 accepts a variety of interchangeable standard and injection baskets used also in LAB 00 models. Main optional features - rd and th Chemical dosing pump - HEPA H air filter - USB port - Ethernet connection - Built-in water softner - Boiler to pre-heat DI water (into fully dedicated bottom basement) - Light inside the chamber - Integrated printer ST Dimensions and connections Standard electrical connection (International) 00V/~+N/0Hz Optional electrical connection (North America)* 08V/~+N/0Hz or 80V/~+N/0Hz Power 80 W Pump power 0 W Noise. db(a) Permitted room temperature + C/ F - +0 C/0 F Dryer blower up to 0 m /h ft /h Dryer heating 000 W * other electrical connections also available as optional 0mm 0.9 0mm /.9 air flow breather 80mm / mm.0 8mm.0 90mm. useful space mm 8. 80mm /. 9,mm / 9. 8mm /.0 0mm / mm.9 00mm /. 8mm /.0 -- floor drain Warm water connection ¾ male DN 0 mm Cold water connection ¾ male DN 0 mm Demineralized water connection ¾ male DN 0 mm Chamber breather pipe Electrical connection Machine drain Ø 0 mm/. Ø 0 mm/.

16 LAB 80 - Laboratory glassware washer LAB 80 large capacity glassware is specially developed for laboratories that require to clean large quantities of items on a daily basis. Five washing/drying positions and four washing/drying levels feature on this machine, which also incorporates a powerful filtered hot air system. This machine is capable of cleaning bottles up to 00 lt /. Gal US. The filtered forced air drying system with adjustable time and temperature setting, helps to ensure a complete drying, inside and outside, of all the glassware. Two washing pumps, each of them dedicated to separate washing circuits, ensure a high water flow rate combined with effective spray pressure. Washing chamber Chamber volume 00 lt/8.0 Gal US Basket volume 0 lt/.9 Gal US X Washing injection system and air drying operate on five levels. The upper levels can be placed at different water/air connections depending on the height of the loaded glassware. Level positions 0 mm / 0. 0 mm /.0 80 mm / mm /. 0 mm /.9 mm /. 90 mm / mm / mm / mm /.0 90 mm /. 90 mm /. 80 mm /

17 LAB 80 - Key features - Hinged drop down door counterbalanced for ease of operation and provided with glass window. - Steelcotronic control panel with LCD display to visualize cycle status with 0 standard programs for laboratory glassware and 0 additional custom programs available for customization. - RS port for printer connection to monitor and validate washing phases. - Ergonomic design of the door level height allows to the user a convenient loading/unloading job with the support of a manual loading/unloading trolley. - Telescopic bearing rails enable easy and safe loading/unloading of the glassware. - Washing/drying injection system on five levels. - Inner cabinet, washing arms and tank filters made of high quality AISI L stainless steel. - Heavy washing pumps ensure high flow rate combined with effective spray pressure. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Washing and DI disinfection temperature are fully adjustable up to 9 C/99 F. Temperature is monitored by two independent sensors. - Filtered forced hot air drying system with adjustable time and temperature setting, helps to ensure the complete inside and outside drying of all the glassware. - Optional steam condenser to eliminate vapors from entering into the laboratory. - Two standard automatic liquid dispensers provided with level control. Two more dispensers are available. - Possibility to store up to three 0 lt./. Gal US containers into a sliding drawer. - Steelco LAB 80 accepts a variety of interchangeable standard and injection baskets. Main optional features - rd and th Chemical dosing pump - HEPA H air filter - USB port - Flow meters - Integrated printer ST - Steam condenser Dimensions and connections Standard electrical connection (International) 00V/~+N/0Hz Optional electrical connection (North America)* 08V/~+N/0Hz or 80V/~+N/0Hz Power 0000 W Pump power 0 W W Noise 8 db(a) Permitted room temperature + C/ F - +0 C/0 F Dryer blowers up to x 0 m /h - 0 ft /h Dryer heating 800 W * other electrical connections also available as optional 0mm /.88 9 mm /. 8 mm /. 0 mm / 9. 8 mm /.8 90 mm /. 0mm /.88 0 mm / mm /. 90 mm /. Warm water connection ¾ male DN 0 mm Cold water connection ¾ male DN 0 mm Demineralized water connection ¾ male DN 0 mm Chamber breather pipe Ø 0 mm /. Electrical connection Machine drain Ø mm /. Floor drain Ø 0 mm /.9

18 LAB Laboratory glassware washer LAB 900 large capacity glassware washer is specially developed for laboratories that require to clean large quantities of items on a daily basis. Four washing/drying positions and three washing/drying levels feature on this machine, which also incorporates a powerful filtered hot air system. This machine is capable of cleaning bottles up to 00 lt /. Gal US. Washing chamber Level positions Chamber volume 00 lt/.08 Gal US Basket volume 0 lt/9. Gal US X Washing injection system and air drying operate on four levels. The upper levels can be placed at different water/air connections depending on the height of the loaded glassware. 8 mm /.0 mm /.8 mm / 9. 0 mm / 8.0 mm /.9 mm /.9 mm /. 8 mm / mm /.8 0 mm /. Wash cart with washing arm see note at page 9 8 0

19 LAB Key features - Full visibility motorized sliding up door made of double HST temperate glass. - Steelcotronic control panel with LCD display to visualize cycle status with 0 standard programs for laboratory glassware and 0 additional custom programs available for customization. - RS port for printer connection to monitor and validate washing phases. - Ergonomic design of the door level height allows to the user a convenient loading/unloading job with the support of a manual loading/unloading trolley. - Telescopic bearing rails enable easy and safe loading/unloading of the glassware. - Washing/drying injection system on four levels. - Inner cabinet, washing arms and tank filters made of high quality AISI L stainless steel. - Heavy washing pump ensure high flow rate combined with effective spray pressure. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Washing and DI disinfection temperature are fully adjustable up to 9 C/99 F. Temperature is monitored by two independent sensors. - Optional filtered forced hot air drying system with adjustable time and temperature setting, helps to ensure the complete inside and outside drying of all the glassware. - Optional steam condenser to eliminate vapors from entering into the laboratory. - Two standard automatic liquid dispensers provided with level control. Two more dispensers are available. - Possibility to store up to three 0 lt./. Gal US containers. - Steelco LAB 900 accepts a variety of interchangeable standard and injection baskets. Main optional features - rd and th Chemical dosing pump - Forced hot air drying system - HEPA H air filter - USB port - Flow meters - Steam or mixed heating - Steam condenser - Integrated printer ST Dimensions and connections Standard electrical connection (International) Optional electrical connection (North America)* Power** Pump power Noise Permitted room temperature 00V/~+N/0Hz 08V/~+N/0Hz or 80V/~+N/0Hz 0000 W 000 W 8, db(a) + C/ F - +0 C/0 F Dryer blower up to 00 m /h - ft /h Dryer heating * other electrical connections also available as optional ** with electrical heating elements - chamber steam heating or mixed heating configurations available as option 800 W,, 9, 9 mm/ mm/.80 9mm/.0 0mm/ mm/.0 0mm/.88 Warm water connection ¾ male DN 0 mm Cold water connection ¾ male DN 0 mm Demineralized water connection ¾ male DN 0 mm Chamber breather pipe Ø 0 mm /. Electrical connection 9 0 Steam connection Compressed air ½ gas ¼ male Machine drain Ø mm /. Floor drain Ø 0 mm /.9 9

20 LAB Laboratory glassware washer Steelco LAB 000 glassware washer has been developed for those laboratories that are equipped with centralized washing areas. The machine is provided with a pass-through double door acting as a barrier between the dirty and the clean area. The glassware after the cleaning and drying process will be transferred back to the laboratory for re-use. A 00 mc/h HEPA filtered forced air drying system with adjustable time and temperature settings, helps to ensure the complete inside and outside drying of all the glassware. Filtered forced air drying system with adjustable time and temperature setting, helps to ensure completely dry, inside and outside, of all the glassware. Two washing pumps, each of them dedicated to separate washing circuits, ensure a high water flow rate combined with effective spray pressure. Level configurations In this machine the injection basket can accept up to cassettes dedicated to glassware or pipettes in two levels. Washing chamber Chamber volume 00 lt/.08 Gal US Basket volume 0 lt/9. Gal US Level positions 0 mm /.8 mm / 0.8 mm /.0 0

21 LAB Key features - Ethernet connection. - Ergonomic design of the door level height allows to the user a convenient loading/unloading job with the support of manual loading/unloading trolley. - Automatic motorized double glass doors, vertical sliding. - Baskets injection connection system to the washing water pipe. - HEPA filtered forced air drying system with adjustable time and temperature settings, helps to ensure the complete inside and outside drying of all the glassware. Air drying distribution on all chamber and basket injectors. - Touch screen color display with programs for laboratory is available. - Washing and DI disinfection temperature are fully adjustable up to 9 C/99 F. Temperature is monitored by two independent sensors. - Steam condenser optional eliminates vapors from entering into the laboratory. - Two heavy washing pumps provide to ensure high flow rate combined with effective spray pressure. - Washing/drying modular injection supports on two levels. - Inner cabinet, washing arms and tank filters made of high quality AISI L stainless steel. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Two standard automatic liquid dispensers provided with level control. Two more dispensers are available. - Possibility to store up to four 0 lt./. Gal US containers into the basement. - Steelco LAB 000 accepts a variety of interchangeable standard and injection baskets. Main optional features - rd and th Chemical dosing pump - HEPA H air filter - Integrated printer ST Dimensions and connections Standard electrical connection (International) x00v/0hz Optional electrical connection (North America)* x08v/0hz or x80v/0hz Power 0000 W Pump power 0 W W Noise 8 db(a) Permitted room temperature + C/ F - +0 C/0 F Dryer blower up to 00 m /h - ft /h Dryer heating 800 W * other electrical connections also available as optional 0mm / 9. 0mm /.98 9mm. 900mm/.80 0 mm /.0 0mm / mm.8 80mm/.88 80mm/. 00mm.8 0mm. 00mm.9 0mm. 880mm /. 9mm /.0 0mm/9. 00mm.8,mm 9.90 mm / mm 8.,mm mm mm.9 0mm. 00mm.8 unloading side loading side Warm water connection ¾ male DN 0 mm Cold water connection ¾ male DN 0 mm Demineralized water connection ¾ male DN 0 mm Chamber breather pipe Ø 0 mm /. 9 0 Electrical connection Pneumatic air pressed ¼ male Machine drain Ø mm /. Floor drain Ø 0 mm /.9

22 LAB DRYER for LAB 00 serie By skipping the drying phase using an external device, the glassware washer can be loaded for the next cycle earlier. This combination provides the same throughput of glassware as individual glassware washers, saving time. - Cart compatibility with all LAB 00 serie machines. - Filtered air dryer (HEPA optional) 0 m /h - 98 ft /h. - Dryer heating W Double temperature check, one inside the chamber and one into the air dryer. - LED display. - different drying programs, 0 and 0 min. cycle time and one program to maintain the temperature. - Door provided with glass window (optional) mm mm/. 0mm/.80 Dimensions and connections Standard electrical connection (International) x0v/0hz 80mm/. 0mm. 0mm/ mm mm/. 0mm 9. Optional electrical connection (North America)* x08v/0hz or x0v/0hz Power Noise Permitted room temperature * other electrical connections also available as optional 000 W db(a) from + C/ F to +0 C/0 F 0mm. 0mm/0.0 0mm/. Chamber breather pipe Diam. 0 mm/. Disconnecting device with A fuse (not provided) Drying chamber Chamber volume lt /. Gal Us Basket volume lt / 9.89 Gal US X Drying injection system operates on two independent levels. Level positions 80 mm / mm / 8. 0 mm / 9.8 Wash cart with washing arm see note at page

23 Washing Cart selection guide steps guide Choose the glassware washing system standard solution...go to customized combinations... follow next steps.... or Select the washing cart frame maximum glassware diameter accepted and related number of glassware positions upper or lower level Select the appropriate injection nozzle choose the nozzle type choose the nozzle height page for LAB 00 models page for LAB 00 and LAB 0 page for LAB 80 page for LAB 900 page for LAB 000 Check the useful heights of the machine levels

24 Introduction to glassware washing washing cart and insert systems selection Injection washing Immersion and flushing washing Bulb, graduated, Pasteur pipettes Beakers Jugs Mugs Buckets Jars Weighing bottles Funnels Powder funnels Imhoff cones Evaporating dishes Weighing dishes Petri dishes Basins Trays Erlenmeyer flasks Bottles Beakers Weighing bottles Test tubes

25 Test tubes and vials Volumetric flasks narrow neck Wide neck bottles Erlenmeyer flasks narrow neck Erlenmeyer flasks wide neck Low capacity volumetric flasks Centrifuge tubes Graduated cylinders Erlenmeyer flasks wide neck Flat or round bottom flask narrow neck Funnels Wide or narrow neck bottles Graduated cylinders Weighing bottles Graduated cylinders Imhoff cones

26 Select the washing cart frame maximum glassware diameter accepted, related number of glassware positions, upper/lower machine levels Empty version of the racks give the customer the possibility of full configuration. The tables show the maximum glassware diameter allowed in the washing cart frame and of the number related positions. + = It is possible to customize the washing cart frame by using different nozzles and/or accessories. for LAB 00 and LAB Dryer models empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes CE / 0.98 U only for mm,/0. Ø nozzles CE 0 /. 0 U only for mm,/0. Ø nozzles C809E 0 /.9 U only for mm,/0. Ø nozzles C8E /. U only for mm,-/0.-0. Ø nozzles CE /.9 U CE 90 /. U C9E 0 /. 8 U CE 0 /. 8+ U see C08, C0, C0 accessories CE 0 /. 0 L only for mm,/0. Ø nozzles C80E 0 /.9 L only for mm,/0. Ø nozzles C8E /.0 L only for mm,-/0.-0. Ø nozzles C990E 0 /. 9 L CE 0 /. L CE 89 /.0 L C9E 0 /. 8 L C09E 0 /. L C90E 0 /.90 9 L C9E /. 8 L mm 0x90 / 9.8 x9.9 space CE 0 /. L mm 90x90 /. x9.9 space C8E 89 /.0 0 L mm x90 / 0. x9.9 space C80E 89 /.0 0+ L see C08, C0, C0 accessories for LAB 00 and LAB 0 models empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes C09E /. U only for mm,/0. Ø nozzles C9E 0 /. 0 U only for mm,/0. Ø nozzles C8E /.8 8 U only for mm,/0. Ø nozzles CE 0 /. U CE 00 /.9 0 U C88E 0 /. U C99E 0 / 0.9 U mm 00x90 /.8 x9.9 space CE /.9 + U see C08, C0, C0 accessories C8E / 0.98 U only for mm,/0. Ø nozzles C9E / 0.98 L only for mm,/0. Ø nozzles C09E 0 /. 0 L only for mm,/0. Ø nozzles CE 0 /. L only for mm,-/0.-0. Ø nozzles C9E 0 /. L C0E 00 /.9 0 L C89E 0 /. L C88E 0 /.9 L CE 0 /. L mm 0x90 / 9.0 x9.9 space CE 00 /.9 L mm 0x90 / 98. x9.9 space C8E /.9 + L see C08, C0, C0 accessories

27 Main configurations of empty version washing carts max Ø Top view of a portion of a injection washing cart showing the maximum glassware diameter allowed Example of customized empty washing cart. Example of mixed solution with additional loading space. Example of mixed solution with additional pos. for test tubes (max ø 0mm/0.9 ). Example of test tubes (max ø mm/0.98 ) fully dedicated solution. for LAB 80 model empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes CE / U only for mm,/0. Ø nozzles C0E /. U CE 8 /.0 U CE 90 /. 8 U C8E 0 /. U CE 0 /.90 8 U CE 8 /. U mm 80x8 / 8.90 x.0 space CE /.9 0+ U see C08, C0, C0 accessories CE /.9 L CE 8 /. L CE 90 /. 8 L C9E 0 /. L CE 0 /.90 8 L CE 90 /.8 0 L CE 0 / 9.8 L for LAB 900 model empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes C9E / all only for mm,/0. Ø nozzles CE /.9 all CE 8 /.0 all C0E 90 /. 8 all CE 0 /.90 8 all C0E 90 /.8 0 all C0E 8 /. all mm 80x8 / 8.90 x.0 space CE /.9 0+ all see C08, C0, C0 accessories for LAB 000 model empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes C09E 0 /. 99 all only mm,/0. Ø nozzles can be used C0E 0 /.9 all C0E /.9 all C0E 98 /.8 all C0E 9 /. all Example of configuration based on C cart for LAB 80 washer disinfector for simultaneous washing of ø 0 mm, ø 8 mm, and ø 00 mm glassware by the use of C000 cap screws for closing injection nozzle seats.

28 Select the appropriate injection nozzle choosing nozzle types and heights Injection nozzles 0 90 mm 0,, Nozzles are available in different height sizes. According to the glassware shape and dimension, nozzles should be chosen in order to have 0/90 mm clearance from the nozzle final tip and the glassware bottom. Some kind of nozzles are endowed with adjustable spring retainer. Spring retainers allow to place glassware of different heights on the same nozzle. C090 C09 C09 C090 C09 C090 C09 C090 A, 0., 0., 0., 0., 0. A B B C C... D D E E *.* 0*.* Nozzle dimensions The critical dimensions to be considered in choosing the suitable nozzle are the following: E dimension: for the correct coupling nozzle/glassware and the check of the distance nozzle/glassware. The * indicates the maximum dimension for the height regulation of nozzles with spring. D dimension + clearance: for the compatibility check washing machine/ positioning level. 8

29 C09 C090 C09 C090 C099 C0908 C09 C090 A B C D E *.* *.* *.8* * 9.* A B C D E *.8* * 9.* C099 C090 C09 C09 C09 C09 C098 C09 A B C D E *.* *.* *.8* * 9.* A B C D E flex flex flex bottle support ø 8mm /.0 code C00 øb øb øb D øa C E D øa C E D øa C E 9

30 Check the useful heights of the machine levels LAB 80 9 LAB mm / mm / 8. 0 mm / mm / 0. 0 mm /.0 80 mm / mm /. 0 mm /.9 mm /. 90 mm / mm / mm / mm /.0 90 mm /. 90 mm /. 80 mm / LAB 00 LAB mm / mm / mm /.09 0 mm / mm /.0 8 mm /.0 mm /.8 mm / 9. 0 mm / 8.0 mm /.9 mm /.9 mm /. 8 mm / mm /.8 0 mm / LAB 0 LAB mm /.80 0 mm /. 0 mm /.8 0 mm / 8. 0 mm /.9 0 mm / mm / mm / mm / mm /.8 mm / 0.8 mm /.0 Washing cart with washing arm Important notice Washing cart level heights have to be reduced by 0mm/. for LAB 00/00/0 models and 0mm/.9 for LAB 80/900 models (L) when the upper level washing cart is provided with washing arm. The use of an upper level washing cart provided with washing arm allows mm/0.9 gain on loading useful height (G) referred to the washing cart loading area. G L Washing loads with glassware that are positioned too much close to the washing arm jets can generate shadow areas where washing efficacy can be reduced.

31 LAB 00 / LAB Dryer - Standard configuration washing carts C - upper washing cart with washing arm, loading space 8x0mm (9.09 x. ) C88 support grid to have a flat surface on a C. Please note this will reduce the usable height by 0 mm CL - lower washing cart, loading space 90x0mm (9.9 x8.0 ) C0 - lower washing cart with pipettes cassettes max length 00mm /.8 C9 - mixed injection washing cart: positions for pipettes (min pipette length 0mm - max pipette length mm) nozzles h 0 ø max 0mm nozzles h 0 ø max 98mm nozzles (C09) h ø max 0mm additional loading space 0mm x 0mm. C9 - lower pipettes washing cart max 8 positions. Minimum pipette lenght 0mm/9.8 and 00mm/.8 Maximum pipette length mm/.0 C88 - upper washing cart for vials: positions (max ø mm, nozzle 9mm h) 90x0 mm (9.9 x9.8 ) additional space C89 - lower washing cart for vials: positions (max ø mm, nozzle 9mm h) 00x0 mm (9.8 x0. ) additional space

32 LAB 00 / LAB 0 - Standard configuration washing carts C8 - upper washing cart with washing arm, loading space 8xmm (9.09 x0. ) C - lower washing cart, loading space 90x0mm (9.9 x. ) C989 - lower pipettes washing cart max positions. Minimum pipette lenght 0mm/9.8 and 00mm/.8. Max. pipette length 0mm/9.9 on LAB 0 and mm/.0 on LAB 00. C88 - support grid to have a flat surface on a C8. Please note this will reduce the usable height by 0 mm C - lower basket for LAB 0 with pipettes cassettes (max length 00mm/. ) C - lower basket for LAB 0 with pipettes cassettes (max length 00mm/.8 ) C - lower basket for LAB 00 with pipettes cassettes (max length 00mm/.8 ) Pipettes must be fully covered by water and therefore must stay within the cassette. C - 0 lt carboy washing cart Only for LAB 0 model C09 - lt and 0lt bottle and big capacity Erlenmayer flasks washing cart. Capacity: up to items Ø max 0mm/9. up to items Ø max 90mm/.8 C00-0lt bottle and big capacity Erlenmayer flasks washing cart. Capacity: up to items Ø max 80mm/.0

33 LAB 80 - Standard configuration washing carts C0 - upper washing cart with washing arm, loading space 8xmm (.0 x0. ) C9 - lower washing cart without washing arm, loading space 0xmm (. x0. ) C - lower pipettes washing cart max 88 positions. Minimum pipette lenght 00mm/.8 The maximum pipette length is related to the use of upper levels: 0mm/. with upper levels installed 00mm/. with upper level installed C8 - lower washing cart with pipettes cassettes max length 00mm /. C - lower washing cart with pipettes cassettes max length 00mm /. Pipettes must be fully covered by water and therefore must stay within the cassette. C - grid to allow the loading of small object on std. washing carts dim. x8mm (9.0 x.9 ) C - grid cover to be positioned over light object dim. x8mm (9.0 x.9 ) C - 0lt and lt bottles and carboys washing cart. Capacity: up to items Ø max 00mm/.8 C8-0lt carboys washing cart. Capacity: up to items Ø max 00mm/. LAB Standard configuration washing carts C - upper washing cart (with washing arm) loading space 8xmm (.0 x0. ) C - lower washing cart (without washing arm) loading space 8xmm (.0 x0. ) C - pipettes washing cart max 88 pos.. Minimum pipette lenght 00mm/.8. Max. pipette length is related to the use of upper levels: 00mm/9.8 with upper level installed, 00mm/. with no upper levels installed.

34 LAB Standard configuration washing carts C00 - injection washing cart suitable for removable cassettes on levels, can be configured with C0, C0, C0, C08 and C09 cassettes C08 - lower vertical pippettes cassette 8 positions. Minimum pipette lenght 0mm/0., maximum pipette length 90mm/.. C insert with 8 spring hooks for laboratory glassware C net basket mm.0x0x0. x. x. C cover for C C9 positions insert for Petri dishes C8 mm. 00h/.9 h, C9 mm. 0h/. h C0 mm. 00h/.8 h C cover for C8/C9/C0 C8 net separator for / net basket Net cover for positions test tubes wash carts (i.e. C, C, C, C80...) C0 8x8x0h mm / 9. x9. x9.8 h C08 8x8xh mm / 9. x9. x.89 h C0 8x8xh mm / 9. x9. x. h (C0 to be laid directly on top of the test tubes) C0 Adjustable height net cover for positions test tubes washing carts (i.e. C8, C9) dim. xxh mm /. x. x0.0 h

35 Accessories - Inserts and components Injection nozzle support Gasket for pipette Ø max mm/0., min mm/. C09 C09 Ø mm / H. 0 mm Ø 0. / H.. Ø mm / H. 8 mm Ø 0. / H.. C000 Ø 0 mm / H. mm Ø 0.9 / H. 0.8 Cap for closing unused holes C000 Injection nozzle bottle support Support for injection nozzle ø,mm/0,0 C09 C09 Ø mm / H. 00 mm Ø 0. / H..8 Ø mm / H. 0 mm Ø 0. / H.. C000 Ø mm / H. mm Ø 0.9 / H. 0. Cap for closing unused holes C000 Injector sleeve with silicone guard for pipettes (max pipette ø mm/0. ) C0890 Plastic cross ø mm/. for injection nozzle ø,mm/0.0 C0008 Plastic cone ø mm/0.9 for injection nozzle ø,mm/0.0 C000 Injection nozzle cap ø mm/0. for injection nozzle ø,mm/0.0 C000 Bottle support ø 8mm/.0 for injection nozzle ø mm/0. C00 Bottle support ø mm/.0 for injection nozzle ø mm/0. C008 Plastic cross ø mm/. for injection nozzle ø mm/0. C0009 Injection nozzle cap ø mm/0. for injection nozzle ø mm/0. C000 Bottle support ø mm/. for injection nozzle ø mm/0. C000 Plastic cross ø mm/.9 for injection nozzle ø mm/0. C000 Injection nozzle cap ø 0mm/0.9 for injection nozzle ø mm/0. C000

36 For the Environmentally conscious devoted to hygiene For the Environmentally conscious For the Environmentally conscious For the Environmentally conscious For the Environmentally conscious Pharmaceutical washing systems Pharmaceutical washing-systems Washer disinfectors > animal cages and feeding bottles devoted to hygiene Washer disinfectors Small/Medium Range Washer disinfectors > Small - Medium range Washer disinfectors CSSD Range - Systems and Automations Washer disinfectors > CSSD Range - Systems and Automations For the Environmentally conscious devoted to hygiene devoted to hygiene Washer disinfectors for lifescience applications Dental washer disinfectors Dental washer disinfectors devoted to hygiene Flusher disinfectors > for hospitals and nursing houses devoted to hygiene Flusher disinfectors The products and technical specifications are subject to change wihout prior notice. Please consult your Steelco dealer for the latest information. Headquarters STEELCO S.p.A. Via Balegante, - 09 Riese Pio X (TV) - Italy Ph Fax steelco@steelcospa.com Branches STEELCO HUNGARY Temesvár u., 9- Budapest - Hungary Ph. + 0 Fax steelco@t-online.hu STEELCO USA 999 Stinson Way - Unit 0 West Palm Beach, FL USA Ph Fax contact@steelco-usa.com STEELCO ASIA th floor, Suite, IOI Business Park Persiaran Puchong Jaya Selatan - Bandar Puchong Jaya 00 Puchong, Selangor - Malaysia Ph (Ext. ) - Fax: adminasia@steelcospa.com DC-PD-0-LAB EN rev_0