ABV AD AFF CO CODP COTG COWP CW DN EWC FD HB HW

Size: px
Start display at page:

Download "ABV AD AFF CO CODP COTG COWP CW DN EWC FD HB HW"

Transcription

1 TA WASTE VENT WALL MOUNTED WATER CLOSET WITH WC ELONATED BOWL AT ADA HEIHT " " " UR LAV SK SH TMV MSB WMB WASHIN MACHINE SUPPLY " /" /" /" AND DRAIN FIXTURE NOTES: WALL HUN, WALL OUTLET, VITREOUS CHINA HIH EFFICIENCY URINAL WITH ELONATED RIM 0x8 / BARRIER FREE VITREOUS CHINA LAVATORY WITH CONCEALED ARM CARRIERS DOUBLE BOWL STAINLESS STEEL THERMOSTATIC MIXIN VALVE MOP SERVICE BASIN HOT WATER " /" /" /" /" /" /" SHOWER DRAIN " /" /" /" /" ES EMERENCY SHOWER COLD WATER FLOOR MOUNTED WATER CLOSET WITH WC ELONATED BOWL ADA COMPLIANT " " " /" /" /" /" SK WALL HUN, STAINLESS STEEL LAVATORY /" /" /" /" VANDAL RESISTANT EWC /" /" /" ELECTRIC WATER COOLER " " /" /" MSS MOP SERVICE SINK " " /" /" NFWH NONFREEZE WALL HYDRANT /" PLUMBIN FIXTURE SCHEDULE TEMP WATER MANUFACTURER AND MODEL NUMBER " AMERICAN STANDARD MODEL 7.0 "AFWALL". PF FLUSH VALVE TOILET, VITREOUS CHINA, WALL MOUNTED, DIRECTFED SIPHON JET ACTION, /" INLET SPUD, OPEN FRONT SOLID WHITE PLASTIC SEAT. PROVIDE SLOAN ROYAL OPTIMA MODEL. V DC SENSOR ACTIVATED FLUSHOMETER. AMERICAN STANDARD MODEL 0.00 "WASHBROOK".0 PF, VITREOUS CHINA, FLUSHIN RIM, ELONATED " RIM FROM FINISHED WALL, /" TOP INLET SPUD. PROVIDE SLOAN ROYAL MODEL 80ESS V DC SENSOR ACIVATED FLUSHOMETER. AMERICAN STANDARD MODEL 0. "COMRADE" WALL HUN VITREOUS CHINA LAVATORY, WITH CONCEALED ARM SUPPORT, " CENTER FAUCET HOLES. PROVIDE ZURN MODEL Z80XLH POLISHED CHROMEPLATED CAST BRASS FAUCET WITH " WRIST BLADE HANDLES AND HANDICAP RID DRAIN. ADVANCE TABCO "REALINE" DOUBLE COMPARTMENT SCULLERY SINK # 9. AUE TYPE 0 SS WITH " HIH BACKSPLASH. SS /8" DIAMETER LES. PROVIDE WITH TABCO # K HEAVY DUTY PRERINSE FAUCET. B SHOCK S.S. RECESSED ARRESTOR AS RILL OUTLET BOX WESTERN NATURAL AS PRODUCTS LTD. MODEL R00SS STAINLESS STEEL RECESSED AS OUTLET BOX /" /" JAY WITH R. LOCKABLE SMITH MODEL DOOR. 00 P.D.I. SIZE A FIXTURE UNIT RATIN. ABBREVIATIONS: ACCESS DOOR ABOVE FINISH FLOOR COLD WATER ELECTRIC WATER COOLER FLOOR DRAIN HOSE BIBB HOT WATER ENERAL NOTES. FIELD COORDINATE ALL PIPE RUNS BEFORE FABRICATION AND INSTALLATION. NO EXTRAS SHALL BE PERMITTED FOR REROUTIN, REFABRICATION, RESTOCKIN OR REMOVAL OF INSTALLED WORK DUE TO COORDINATION WITH BUILDIN STRUCTURE, WORK OF OTHER TRADES OR EXISTIN BUILDIN COMPONENTS. DRAWINS ARE SCHEMATIC AND, PIPIN RUNS DO NOT SHOW ALL NECESSARY CHANES IN ELEVATION OR OFFSETS REQUIRED FOR A COMPLETE INSTALLATION. PROVIDE ALL PIPE OFFSETS AS REQUIRED FOR THE INSTALLATION OF THE RUNS SHOWN ON PLANS.. PLANS AND SECTIONS DO NOT SHOW COMPLETE VALVE ARRANEMENT FOR PIPIN TO EQUIPMENT. SEE FLOW SCHEMATICS AND DETAILS.. PROVIDE DRAINS AT ALL WATER PIPIN LOW POINTS. PITCH PIPIN TO DRAIN.. THE BUILDIN HAS A SEISMIC DESIN CATEORY OF C, IS SEISMIC USE ROUP III, AND HAS AN IMPORTANCE FACTOR OF.. ADVANCE TABCO SS WALL MOUNT LAVATORY # 7PS9, 0"x"x" BOWL. PROVIDE WITH INTERAL SS WALL BRACKET. HWR HOT WATER RETURN SAN SANITARY DRAINAE ABOVE RADE PROVIDE WITH TABCO #K9 FAUCET, WITH WRIST BLADE HANDLES, SS BASKET STRAINER, AND AUTOMATIC SOAP DISPENSER. I E INVERT ELEVATION SAN SANITARY DRAINAE BELOW RADE PROVIDE ZURN # FDPVSCP ADJUSTABLE SHOWER DRAIN ASSEMBLY WITH CHROME PLATED STRAINER. LAV LAVATORY MV MIXIN VALVE V VENT PIPIN NIC NOT IN CONTRACT COLD WATER HOT WATER BRADLEY TMV MODEL S90/T/B WITH A FLOW CAPACITY OF TO PM. PROVIDE INTERAL NFWH NONFREEZE WALL HYDRANT STRAINER, INLET CHECKSTOPS, OUTLET DIAL THERMOMETER AND WALL MOUNTIN BRACKET. HOT WATER RETURN NTS NOT TO SCALE CA COMPRESSED AIR PIPIN ELKAY MODEL LVRC8WS NO LEAD, VANDAL RESISTANT, WALL MOUNT ELECTRIC WATER COOLER,.0 FULL PDI PLUMBIN DRAINAE INSTITUTE LOAD AMPS, 70 WATTS. PROVIDE WATERSENTRY FILTER SYSTEM. BA BREATHIN AIR PIPIN SA SHOCK ARRESTER SK SINK LP LP AS PIPIN UARDIAN MODEL DRENCH SHOWER. PROVIDE WITH UARDIAN 800 THERMOSTATIC MIXIN VALVE. TYP TYPICAL WPCO CLEAN OUT WALL PLATE THW TEMPERED HOT WATER CLEAN OUT CLEAN OUT DECKPLATE OR UR URINAL FIAT MODEL MSB, "x"x0" PRECAST TERRAZZO SERVICE BASIN. PROVIDE ADVANCE TABCO MODEL CLEANOUT TO RADE K0 CHROME PLATED SERVICE FAUCET WITH VACUUM BREAKER & INTERAL STOPS. PROVIDE 0" HOSE. V VENT HOSE BIBB OR WALL HYDRANT VTR VENT THRU ROOF FLOOR DRAIN ELKAY WALL MOUNTED STAINLESS STEEL "SERVICE SINK" #ESSB0C. FURNISH COMPLETE WITH " BUCKET HOOK FAUCET W WASTE UNION #LK907BR07LH AND CAST IRON PTRAP #LK7. WC WATER CLOSET SHUTOFF VALVE WH WATER HEATER CHECK VALVE WOODFORD MODEL B7 ANTISIPHON AUTOMATIC DRAININ WALL HYDRANT COMPLETE WITH NONFREEZE WCO WALL CLEANOUT TYPE INTERAL VACUUM BREAKER, LOOSE KEY OPERATOR AND HINED LOCKIN COVER. OPERATIN RELIEF VALVE ROD ASSEMBLY 0/" LON. '8" ABOVE FINISHED FLOOR. STRAINER UY RAY (IPS CORPORATION) MODEL B00 A. STEEL WASHIN MACHINE SUPPLY AND DRAIN BOX WITH INDIVIDUAL /" HOT AND COLD TOP WATER SUPPLY VALVES AND " WASTE.. ALL FIXTURES SHALL HAVE INDIVIDUAL ANLE STOPS, TRAPS AND ESCUTCHEONS.. VERIFY MOUNTIN HEIHTS WITH ARCHITECTURAL ELEVATIONS.. WHEELCHAIR ACCESSIBLE SINKS AND LAVS SHALL HAVE OFFSET TRAPS. ANLE STOPS, SUPPLIES AND TRAPS SHALL BE COVERED WITH TRUEBRO "LAV UARD" OR EQUAL PROTECTIVE COVERIN. AMERICAN STANDARD MODEL.00 "MADERA FLOWISE". PF FLUSH VALVE TOILET, VITREOUS CHINA, FLOOR MOUNTED, DIRECTFED SIPHON JET ACTION, /" INLET SPUD, OPEN FRONT SOLID WHITE PLASTIC SEAT. PROVIDE SLOAN ROYAL OPTIMA MODEL. V DC SENSOR ACTIVATED FLUSHOMETER. ABV AD AFF CO CODP COT COWP CW DN DW EWC FD HB HW ABOVE CLEAN OUT CLEAN OUT DECK PLATE CLEAN OUT TO RADE CLEAN OUT WALL PLATE DOWN DRAWIN PLUMBIN SYMBOLS: A PRESSURE AUE THERMOMETER SHOCK ARRESTER TRAP ELBOW UP ELBOW DN BRANCH OFF TOP TEE BRANCH OFF BOTTOM PRESSURE REDUCIN VALVE COMPRESSED AIR QUICK DISCONNECT BALANCE VALVE DRAIN SCHEDULE THERMAL EXPANSION TANK SCHEDULE HOSE REEL SCHEDULE TA MANUFACTURER AND MODEL NO. FD FD ENERAL SERVICE FLOOR DRAIN WITH NICKEL BRONZE STRAINER. MEDIUM DUTY FLOOR DRAIN WITH CAST IRON BAR RATE. JAY R. SMITH " MODEL 00 CAST IRON FLOOR DRAIN WITH " ROUND ADJUSTABLE NICKEL BRONZE STRAINER. (NOTE ) JAY R. SMITH MODEL 0 " CAST IRON FLOOR DRAIN WITH 8 /" DIAMETER CAST IRON BAR RATE STRAINER. NOTES:() PROVIDE JAY R. SMITH MODEL 90 QUAD CLOSE TRAP SEAL DEVICE. TA ET TYPE VERTICAL ASME, FLEXIBLE DIAPHRAM, FOR POTABLE WATER TANK VOLUME (AL.) MAX. ACCEPT. (AL.) MAX. TEMP. ( F) CIRCULATOR PUMP SCHEDULE MAX. PRESS. (PSI) MAKE & MODEL WESSELS TTA SIZE 0"Ø x " H TA WHR AHR WALL HUN HAND CRANK WATER HOSE REEL WITH 70' /" HOSE. WALL HUN, SPRIN RETURN, ENERAL COMPRESSED AIR HOSE REEL. MANUFACTURER AND MODEL NUMBER HANNAY REELS MODEL N880.B HEAVY DUTY SPRIN REWIND HOSE REEL. PROVIDE 70' OF /" WATER HOSE WITH BACKFLOW PREVENTION DEVICE. PROVIDE " SS FLEXIBLE HOSE FROM HOSE BIB TO REEL. COXREELS MODEL EZPLP0 SPRIN HOSE REEL WITH 0' OF /8" HOSE. PRESSURE RATIN 00 PSI. PHASE TA SERVICE TYPE CAPACITY ELECTRICAL MAKE & MODEL CP HOT WATER CIRCULATION 0 BRONZE ' TDH, /0 HP, TACO MODEL CANNED 0 RPM //0 00B ROTOR AHR WALL HUN, SPRIN RETURN, BREATHIN AIR HOSE REEL. HANNAY REELS MODEL # FHN7 TR HM, HEAVY DUTY SPRIN REWIND HOSE REEL. PROVIDE 0' OF /8" BREATHIN AIR HOSE. PRESSURE RATIN 000 PSI. MOUNT AT 8'0" AFF. DW. BY: DW :

2 ENERAL NOTES. ALL PLUMBIN WORK SHALL BE PERFORMED IN ACCORDANCE WITH THE UNIFORM CONSTRUCTION CODE (UCC), AND THE INTERNATIONAL PLUMBIN CODE (IPC 009).. ALL UNDERSLAB SANITARY PIPIN SHALL BE PITCHED AT /8" PER FOOT MINIMUM.. REFER TO ARCHITECTURAL PLANS FOR DIMENSIONED WALL AND CHASE LOCATIONS. COORDINATE PIPIN STUB LOCATIONS WITH DIMENSIONED PLANS.. ALL SANITARY UNDERSLAB LATERAL PIPIN SHALL BE A MINIMUM NOMINAL DIAMETER OF ".. INVERT ELEVATIONS REFERENCE FINISHED FLOOR.. ALL SANITARY / WASTE PIPIN SHOWN ON THIS DRAWIN IS LOCATED UNDER THE FLOOR SLAB UNLESS NOTED OTHERWISE. KEYED NOTES. CONNECT " SANITARY TO.C. PROVIDED TRENCH DRAINS, COORDINATE CONNECTION WITH.C C0 09 PHASE DW. BY: DW : P. /8" = '0"

3 ENERAL NOTES. ALL PLUMBIN WORK SHALL BE PERFORMED IN ACCORDANCE WITH THE UNIFORM CONSTRUCTION CODE (UCC), AND THE INTERNATIONAL PLUMBIN CODE (IPC 009).. SEE PLUMBIN FIXTURE SCHEDULE DRAWIN P.0 FOR INDIVIDUAL SANITARY AND VENT CONNECTION SIZES. KEYED NOTES. PLUMBIN VENTS TO BE FULLY INSTALLED THOUH ROOF. CAP THE VENT. PROVIDE FT OF PIPIN BELOW ROOF C0 09 PHASE DW. BY: DW : P. /8 = '0"

4 ENERAL NOTES. ALL PLUMBIN WORK SHALL BE PERFORMED IN ACCORDANCE WITH THE UNIFORM CONSTRUCTION CODE (UCC), AND THE INTERNATIONAL PLUMBIN CODE (IPC 009).. SEE PLUMBIN FIXTURE SCHEDULE DRAWIN P.0 FOR INDIVIDUAL SANITARY AND VENT CONNECTION SIZES. KEYED NOTES. PROVIDE WALL MOUNTED REULATOR BOX WITH SERVICE VALVE, PRESSURE REULATOR AND PRESSURE AUE. ALL COMPONENTS SHALL BE RATED FOR 000 PSI MINIMUM. CONNECT TO JIC MALE FITTIN ON BREATHIN AIR MODULE. M0 M0 PHASE M0 DW. BY: DW : P. /8 = '0"

5 P FACP ATS A. ALL PLUMBIN WORK SHALL BE PERFORMED IN ACCORDANCE WITH THE PLUMBIN CODE OF THE UNIFORM CONSTRUCTION CODE (UCC), AND THE INTERNATIONAL PLUMBIN CODE (IPC 009). " CW, "HW, /"HWR AND "N INTO MEZZANINE. PROVIDE NFWH. NO PIPIN REQUIRED UNDER PHASE. /" CW DOWN TO HOSE REEL. P P & P STACKED INTERATED SWITCHBOARD. AHU (PHASE ) B. REFER TO FIXTURE SCHEDULE ON DRAWIN P.0 FOR PIPIN CONNECTION SIZES TO INDIVIDUAL FIXTURES. /" HW & CW DOWN TO EMERENCY SHOWER MIXIN VALVE. PROVIDE /" HW & CW DN TO WASHIN MACHINE SUPPLY BOX. NOT USED. PROVIDE () /" WATER CONNECTIONS TO EAR EXTRACTOR. COORDINATE CONNECTION HEIHTS WITH C AND OWNER. 7 " COMPRESSED AIR DOWN COLUMN TO AIR HOSE REEL. COORDINATE MOUNTIN HEIHT OF AIR HOSE REEL WITH C. /" COMPRESSED AIR DROP. PROVIDE REULATOR WITH FEMALE QUICK CONNECT '0" AFF. AHU (PHASE ) 9'" MAX WATER SERVICE AREA COORDINATE WITH FIRE PROTECTION CONTRACTOR /" CW DN TO TRUCK FILL. /" COMPRESSED AIR DROP. PROVIDE REULATOR WITH FEMALE QUICK CONNECT '0" ABOVE WORK SURFACE OF WORK BENCH. PROVIDE RILLE OUTLET BOX. NO PIPIN REQUIRED UNDER PHASE. /" BREATHIN AIR DOWN TO AIR HOSE REEL. PROVIDE BALL VALVE AT CONNECTION TO AIRHOSE REEL. PROVIDE SEPARATE REULATOR AND SHUT OFF VALVE FOR DEDICATED AS SUPPLY TO ENERATOR. REULATOR SHALL BE SET TO IN. WC. P. /" ='0" C0 09 P. PHASE DW. BY: DW : P. /8" = '0"

6 HOSE REEL /" CW CONTROL VALVE '0" FINISHED FLOOR NTS NOTE: REFER TO ARCHITECTURAL DRAWINS FOR MOUNTIN HEIHT OF HOSE REEL. " TO POTABLE WATER SYSTEM FIRE PROTECTION SERVICE EQUIPMENT BY OTHERS BALL VALVE (TYP.) " STRAINER " RPZ BACKFLOW ASSEMBLY RPZ DRAIN (AIR AP) 8" " DRAIN. PIPE TO BUILDIN EXTERIOR PRESSURE AUE PRESSURE REDUCIN VALVE NO SCALE /" /" HWR AQUASTAT (TYP.) /" " HW " HW BRACE " CW " CW /" RPZ FOR BOILER MAKEUP CONT. BY HVAC /" /" CW BALL VALVE STEEL COLUMN ELBOW REMOVE HANDLE REDUCER (TYPICAL) TMV /" HOSE THREAD FITTIN PHASE /" INDIRECT FIRED STORAE WATER HEATER BY HVAC THERMOSTATIC MIXIN VALVE HOSE END DRAIN VALVE (TYPICAL) '0" FINISHED FLOOR MEZZANINE FLOOR DW. BY: DW :

LAV FCO WCO NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS.

LAV FCO WCO NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS. ELECTRIC WATER HEATER SCHEDULE DESIGNATION MODEL MANUFACTURER STORAGE RECOVERY TEMPERATURE LEAVING ELECTRICAL CHARACTERISTICS REMARKS/SPECIAL INSTRUCTIONS NUMBER GALLONS RATE RISE WATER K.W. VOLTAGE PHASE

More information

HWC NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS.

HWC NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS. ELECTRIC WATER HEATER SCHEDULE DESIGNATION MODEL MANUFACTURER STORAGE RECOVERY TEMPERATURE LEAVING ELECTRICAL CHARACTERISTICS REMARKS/SPECIAL INSTRUCTIONS NUMBER GALLONS RATE RISE WATER K.W. VOLTAGE PHASE

More information

Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Plumbing Standards

Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Plumbing Standards Date Description of Change Pages / Sections Modified ID 8/5/17 Entire document - mgl PART 1 - INTRODUCTION 1.1 This section applies to Plumbing for campus institutional facilities. A. Purpose: Yale University

More information

DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point.

DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point. PART 1 - GENERAL 1.01 Toilet rooms and utility rooms to have floor drains at lowest point. 1.02 Utilize Exposed Flushometers. 1.03 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.

More information

DESIGN STANDARDS SECTION PLUMBING FIXTURES AND EQUIPMENT. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.

DESIGN STANDARDS SECTION PLUMBING FIXTURES AND EQUIPMENT. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type. PART 1 - GENERAL 1.1 Toilet rooms and utility rooms to have floor drains at lowest point. 1.2 Utilize Exposed Flushometers. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.

More information

University of Rochester October 17, 2008 Brooks Landing Business Center

University of Rochester October 17, 2008 Brooks Landing Business Center SECTION 224200 COMMERCIAL PLUMBING FIXTURES PART 1 - GENERAL 1.1 WORK INCLUDED A. Provide all labor, materials, equipment and services to perform operations required for the complete installation and related

More information

SECTION PLUMBING

SECTION PLUMBING SECTION 22 10 00 PLUMBING PART 1 GENERAL 1.1 WORK INCLUDED A. Furnish all labor, material and equipment necessary for the complete installation of the sanitary sewer system (including soil and vent piping),

More information

DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point.

DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point. PART 1 - GENERAL 1.01 Toilet rooms and utility rooms to have floor drains at lowest point. 1.02 Utilize Exposed Flushometers. 1.03 Utilize wall hung toilet room fixtures. Urinals for handicapped may be

More information

A. Section Joint Sealants: Seal fixtures to walls and floors.

A. Section Joint Sealants: Seal fixtures to walls and floors. SECTION 224000 - PLUMBING FIXTURES PART 1 GENERAL 1.1 SECTION INCLUDES A. Water closets. B. Urinals. C. Lavatories. D. Sinks. E. Service sinks. F. Showers. G. Wash fountains. H. Eye wash fountains. 1.2

More information

DUKE UNIVERSITY CONSTRUCTION STANDARDS

DUKE UNIVERSITY CONSTRUCTION STANDARDS 1 22 40 00 Plumbing Fixtures 1. General A. Definitions 1. Section includes a. Water closets and urinals b. Lavatories, sinks, and service sinks c. Electric water coolers, drinking fountains, d. Showers

More information

SECTION DOMESTIC WATER PIPING SPECIALTIES

SECTION DOMESTIC WATER PIPING SPECIALTIES SECTION 22 11 19 DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

DOMESTIC WATER PACKAGED BOOSTER PUMPS

DOMESTIC WATER PACKAGED BOOSTER PUMPS DIVISION 22 PLUMBING 22 11 16 DOMESTIC WATER PIPING 22 11 19 DOMESTIC WATER PIPING SPECIALTIES 1. To facilitate landscape and other maintenance operations, exterior hose bibs shall be provided at 150 foot

More information

B. Shop Drawings: Include diagrams for power, signal, and control wiring.

B. Shop Drawings: Include diagrams for power, signal, and control wiring. SECTION224213.13 -COMMERCIAL WATERCLOSETS PART 1- GENERAL 1.1 SUMMARY Section Includes: 1. Water closets. 2. Flushometer valves. 3. Toilet seats. 1.2 ACTION SUBMITTALS Product Data: For each type of product.

More information

A. All fixtures shall meet the requirements of ANSI A117.1, ANSI Z124.2 and the State of Texas Accessibility Standards (TAS).

A. All fixtures shall meet the requirements of ANSI A117.1, ANSI Z124.2 and the State of Texas Accessibility Standards (TAS). PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

GENERAL PLUMBING NOTES

GENERAL PLUMBING NOTES GENERAL SYMBOLS GENERAL PLUMBING NOTES PLUMBING LEGEND ABBREVIATIONS N PLAN OR DETAIL NO SHEET NUMBER KEYED NOTE TO PLAN REVISION NUMBER NORTH ARROW. IN THE PREPARATION OF THESE PLANS, THE ENGINEER HAS

More information

SECTION PLUMBING FIXTURES AND TRIM. A. Types of plumbing fixtures required for the project include the following:

SECTION PLUMBING FIXTURES AND TRIM. A. Types of plumbing fixtures required for the project include the following: SECTION 15440 PART I - GENERAL 1.01 WORK INCLUDED A. Types of plumbing fixtures required for the project include the following: 1. Water Closets 2. Urinals 3. Lavatories 4. Mop Sink 5. Sinks 6. Electric

More information

GENERAL PLUMBING REQUIREMENTS

GENERAL PLUMBING REQUIREMENTS 22 00 00 GENERAL PLUMBING REQUIRMENTS i. 00 00 07 Design Professional Design Process Requirements ii. 00 00 08 Design Professional Documentation Requirements and Deliverables iii. 01 81 00 Facility Performance

More information

1. Division 22 Section "Emergency Plumbing Fixtures." 2. Division 22 Section "Drinking Fountains and Water Coolers."

1. Division 22 Section Emergency Plumbing Fixtures. 2. Division 22 Section Drinking Fountains and Water Coolers. Page 224000-1 SECTION 224000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

PLUMBING FIXTURES, TRIM, AND SUPPORTS

PLUMBING FIXTURES, TRIM, AND SUPPORTS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: SECTION 15440 PLUMBING FIXTURES, TRIM, AND SUPPORTS 1. 10800 - Toilet Room Accessories 2. 11600 - Laboratory Equipment. 3. 15410 - Piping (Plumbing). 4.

More information

A. General: comply with appropriate standards. 1. International Association of Plumbing and Mechanical Officials: IAPMO. 2. California State AB 1953.

A. General: comply with appropriate standards. 1. International Association of Plumbing and Mechanical Officials: IAPMO. 2. California State AB 1953. SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Water closets. 2. Urinals. 3. Lavatories. 4. Sinks. 5. Service sinks. 6. Electric water coolers. 7. Wash fountains.

More information

B E ROUTE DUCT BEHIND BOOKSHELF. GRILLE MOUNTED ON TOP OF BENCH. BOOK CASE WALL 12x8 8x5 I 8"Ø 7"Ø 125 CFM I D M FLOOR SIDE WALL VENT 6x5 160 CFM 6"Ø 6"Ø 8x10 J C G 1 Section M-1 NOT TO SCALE Project No

More information

2). Crane Co. 4). Kohler Co. 5). Universal-Rundle Corp. Revised September 29, 2017 Commercial Plumbing Fixtures

2). Crane Co. 4). Kohler Co. 5). Universal-Rundle Corp. Revised September 29, 2017 Commercial Plumbing Fixtures PART 1: GENERAL A. This Section provides design standards for plumbing fixtures and trim. Certification of compliance with specified ANSI, UL, and ASHRAE Standards will be required, as appropriate, for

More information

A. This Section includes the following domestic water piping specialties:

A. This Section includes the following domestic water piping specialties: SECTION 221119 DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

More information

DRAWING SCHEDULE TAB REQUIREMENTS BY EQUIPMENT TYPE TYPE OF EQUIPMENT DESCRIPTION COMPONENT TAB REQUIREMENTS

DRAWING SCHEDULE TAB REQUIREMENTS BY EQUIPMENT TYPE TYPE OF EQUIPMENT DESCRIPTION COMPONENT TAB REQUIREMENTS DRAWING SCHEDULE NUMBER TITLE M0-1 MECHANICAL NOTES AND LEGEND M1-0 MECHANICAL FLOOR PLAN M4-0 MECHANICAL SCHEDULES M4-1 MECHANICAL LOAD CALCULATIONS M5-0 MECHANICAL DETAILS M8-0 TCS BASYS CONTROLS DRAWINGS

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Faucets for lavatories, bathtubs, bathtub/showers, showers and sinks. 2. Flushometers. 3. Toilet

More information

SECTION PLUMBING FIXTURES

SECTION PLUMBING FIXTURES CSUEB Pioneer Heights Phase r 15410 Page 1 SECTION 15410 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

TABLE OF CONTENTS DIVISION 22 - MECHANICAL

TABLE OF CONTENTS DIVISION 22 - MECHANICAL TABLE OF CONTENTS DIVISION 22 - MECHANICAL 22 00 00 PLUMBING WORK...1 22 00 01 GENERAL...1 22 00 02 REFERENCES, REGULATORY REQUIREMENTS...1 22 00 03 RELATED SECTIONS of the SPECIFICATIONS...1 22 00 04

More information

SECTION PLUMBING SPECIALTIES

SECTION PLUMBING SPECIALTIES DIVISION 22 PART 1 GENERAL 1.01 SCOPE SECTION 22 0430 PLUMBING SPECIALTIES A. Domestic water, sewer, roof drainage and condensate drains, including piping, equipment and all necessary accessories as designated

More information

PLUMBING DESIGN GUIDELINES SECTION DESIGN GUIDELINES DUVAL COUNTY PUBLIC SCHOOLS

PLUMBING DESIGN GUIDELINES SECTION DESIGN GUIDELINES DUVAL COUNTY PUBLIC SCHOOLS The Design Guidelines, which follow, are intended to supplement the Educational Specifications and State Requirements for Educational Facilities (SREF). Note: All fittings shall be installed by no less

More information

SECTION DOMESTIC WATER PIPING SYSTEMS. 0. Pipe and pipe fittings are specified in the following sections:

SECTION DOMESTIC WATER PIPING SYSTEMS. 0. Pipe and pipe fittings are specified in the following sections: SECTION 15411 January 7, 2004 DOMESTIC WATER PIPING SYSTEMS. RELATED SECTIONS 0. Pipe and pipe fittings are specified in the following sections:. Section 15061, STEEL PIPE AND FITTINGS.. Section 15062,

More information

SECTION LABORATORY and DE-IONIZED WATER SYSTEMS STANDARD CONSTRUCTION STANDARD

SECTION LABORATORY and DE-IONIZED WATER SYSTEMS STANDARD CONSTRUCTION STANDARD PART 1: GENERAL 1.01 Codes and Standards: A. Plumbing Code Compliance: Comply with applicable portions of National Standard Plumbing Code pertaining to selection and installation of Plumbing materials

More information

GENERAL PLUMBING REQUIREMENTS

GENERAL PLUMBING REQUIREMENTS 22 00 00 GENERAL PLUMBING REQUIRMENTS 1. GENERAL A. Related sections: i. 00 00 07 Design Professional Design Process Requirements ii. 00 00 08 Design Professional Documentation Requirements and Deliverables

More information

GENERAL PLUMBING NOTES 6. ALL RISES AND DROPS IN PIPING ARE NOT NECESSARILY SHOWN

GENERAL PLUMBING NOTES 6. ALL RISES AND DROPS IN PIPING ARE NOT NECESSARILY SHOWN FIXTURE SCHEDULE DESIGNATION MANUFACTURER MODEL # FIXTURE DESCRIPTION P- AMERICAN STANDARD. P-A AMERICAN STANDARD. " HIGH VITREOUS CHINA WATER CLOSET W/ ELONGATED BOWL LOW CONSUMPTION FLUSH TANK (. GPF)

More information

SHOE PALACE HUNTINGTON PARK M.200

SHOE PALACE HUNTINGTON PARK M.200 M.200 SPLIT SYSTEM CONDENSING UNIT SCHEDULE MARK SERVICE MODEL NO. COOLING DIMENSIONS ELECTRICAL REMARKS CAPACITY AMBIENT DB REFRIGERANT LENGTH WIDTH HEIGHT WEIGHT VOLT/PHASE MCA MOP (MBH) (DEG F) (IN)

More information

C. ASSE 1013: Performance Requirements for Reduced Pressure Principle Backflow Preventers.

C. ASSE 1013: Performance Requirements for Reduced Pressure Principle Backflow Preventers. SECTION 22 10 00 PLUMBING PIPING AND PUMPS PART 1 - GENERAL 1.1 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design.

More information

DESIGN AND CONSTRUCTION STANDARDS July 2011

DESIGN AND CONSTRUCTION STANDARDS July 2011 PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design for new construction and renovations.

More information

PLUMBING INSTALLATIONS

PLUMBING INSTALLATIONS PLANNING, PROPERTY AND DEVELOPMENT DEPARTMENT PLUMBING INSTALLATIONS A homeowner guide to plumbing requirements for single-family dwellings November 2017 contents Permit Requirements... 3 Inspection Requirements...

More information

Mechanical Inspection Plumbing

Mechanical Inspection Plumbing 0811 Fixtures Sinks, drinking fountains, water closets, showers, etc. Classroom Sinks. Classroom sinks (19) are enameled cast iron self rimming side ledge with gooseneck faucet trim with index handles,

More information

DESIGN AND CONSTRUCTION STANDARDS GENERAL DESIGN GUIDELINES

DESIGN AND CONSTRUCTION STANDARDS GENERAL DESIGN GUIDELINES 2.05 PLUMBING GENERAL DESIGN AND CONSTRUCTION STANDARDS GENERAL DESIGN GUIDELINES - 2.05 It is expected that the plumbing design professional will conform to accepted good engineering design practices.

More information

CHILD DEVELOPMENT & LITERACY CENTER H17-N104-CB SGA 17002

CHILD DEVELOPMENT & LITERACY CENTER H17-N104-CB SGA 17002 SECTION 22 05 00 COMMON WORK RESULTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. The drawings and general provisions of the Contract, including General and Supplementary Conditions, General

More information

A. This Section includes the following emergency plumbing fixtures:

A. This Section includes the following emergency plumbing fixtures: Page 224500-1 SECTION 224500 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

DeCA DESIGN CRITERIA HANDBOOK PLUMBING SYSTEMS

DeCA DESIGN CRITERIA HANDBOOK PLUMBING SYSTEMS GENERAL 1.01 Summary A. The plumbing system shall include sanitary drainage, waste, and vent piping; roof drains and interior downspouts; domestic cold water, hot water, and hot water recirculating piping;

More information

Mechanical/Plumbing Specification

Mechanical/Plumbing Specification Mechanical/Plumbing Specification Contents WC-1 Toilet 3 WC-1 Fixtures - Toilet Seat & Toilet Supply 4 UR-1 Urinal 5 UR-1 Fixtures - Metering Valve & Vacuum Breaker 7 - Wall Cleanout & Urinal Carrier 9

More information

MATERIALS Traps TRAPS. No. IPC IRC Description

MATERIALS Traps TRAPS. No. IPC IRC Description MATERIALS Traps TRAPS MAX " MAX 0" No. IPC IRC Description 00. P0.6 00. P0.6 00. P0. 00. () P0.6 Exc. Vertical distance from fixture to the trap weir can not exceed ". Horizontal distance from the fixture

More information

Willoughby Industries - Security Products

Willoughby Industries - Security Products TOILET WASTE LOCATION (ECW)- WALL OUTLET (ECF)- FLOOR OUTLET TOILET ORIENTATION (L)- ANGLED LEFT (L)- OFFSET LEFT (R)- ANGLED RIGHT (R)- OFFSET RIGHT (C)- CENTER FIXTURE MOUNTING (OF)- OFF FLOOR (ON)-

More information

QUESTIONS AND RESPONSES. Question No. 1: Looks like there are four (4) doors on this project. Who is responsible for the electrified locking hardware?

QUESTIONS AND RESPONSES. Question No. 1: Looks like there are four (4) doors on this project. Who is responsible for the electrified locking hardware? Addendum No. 2 CHALK BLUFF IMPROVEMENTS PROJECT PART A OPERATIONS BUILDING AND PROJECT PART B UPS UPGRADES PWP Bid No.: WA-207-008 TMWA Capital Project No.: -000 October 8, 206 The following information,

More information

TRUMAN STATE UNIVERSITY PRESIDENT S RESIDENCE RENOVATION

TRUMAN STATE UNIVERSITY PRESIDENT S RESIDENCE RENOVATION SECTION 224100 - RESIDENTIAL PLUMBING FIXTURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

More information

2016 CDM Smith All Rights Reserved July 2016 SECTION PLUMBING - EQUIPMENT

2016 CDM Smith All Rights Reserved July 2016 SECTION PLUMBING - EQUIPMENT PART 1 GENERAL 1.01 SCOPE OF WORK SECTION 22 30 00 PLUMBING - EQUIPMENT A. Furnish all labor and materials required and install the following Plumbing Equipment complete as specified herein and as shown

More information

GENERAL PLUMBING REQUIREMENTS

GENERAL PLUMBING REQUIREMENTS 22 00 00 GENERAL PLUMBING REQUIRMENTS i. 00 00 07 Design Professional Design Process Requirements ii. 00 00 08 Design Professional Documentation Requirements and Deliverables iii. 00 00 13 Designing Learning

More information

B. Shop Drawings: Include diagrams for power, signal, and control wiring.

B. Shop Drawings: Include diagrams for power, signal, and control wiring. SECTION 224213.13 - COMMERCIAL WATER CLOSETS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Ventilation Requirements Schedule SCHEDULE BASED ON IMC 2009

Ventilation Requirements Schedule SCHEDULE BASED ON IMC 2009 Ventilation Requirements Schedule SCHEDULE BASED ON IMC 2009 occupancy Gross OccupantsOccupancy Minimum O/A Effectiveness Table 403.3. Single Zone System plumb Minimum Exhaust Actual unit operating conditions

More information

Yale University Design Standards

Yale University Design Standards Change History Date Description of Change Pages / Sections Modified Change Approver Initials 3/26/13 Add text encouraging discussion of innovation in 2 15410, A (Summary) SO newly available products. 3/26/13

More information

SUBCOURSE EDITION EN US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV)

SUBCOURSE EDITION EN US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV) SUBCOURSE EDITION EN5113 5 US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV) US ARMY PLUMBER MOS 51K SKILL LEVELS 1 AND 2 COURSE PLUMBING FIXTURES (PLUMBING IV) SUBCOURSE NO. EN5113 US Army Engineer

More information

PERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 PLUMBING 02/18

PERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 PLUMBING 02/18 NAVFAC PTS-D20 (February 2018) ------------------------------ Preparing Activity: NAVFAC SUPERSEDING PTS-D20 (September 2016) PERFORMANCE TECHNICAL SPECIFICATION SECTION D20 PLUMBING 02/18 NOTE: This section

More information

Willoughby Industries - Security Products

Willoughby Industries - Security Products TOILET WASTE LOCATION (ETW)- WALL OUTLET, BLOWOUT (ETF)- FLOOR OUTLET, SIPHON JET (ETWS)- WALL OUTLET, SIPHON JET FIXTURE MOUNTING (FM)- FLOOR MOUNTED (OF)- OFF FLOOR MOUNTED (OW)- OFF WALL MOUNTED INLET

More information

SECTION (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS

SECTION (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS SECTION 22 34 00 (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS System shall provide a complete hot water return throughout the entire system with balancing (flow control) valves not less than 10 feet from

More information

PROPOSED NEW BUILDING

PROPOSED NEW BUILDING HYDRAULIC DRAWINGS MATERIALS SERVICES TO BE CONSTRUCTED FROM MATERIAL AS LISTED BELOW UNLESS NOTED OTHER WISE SHOWN ON DRAWINGS. SERVICE MATERIAL REMARKS SEWER DRAINAGE upvc SOLVENT WELDED JOINTS SEWER

More information

ASME STANDARDS IN MODEL CODES

ASME STANDARDS IN MODEL CODES STANDARDS IN MODEL CODES ASME Name Model Code With Year of Referenced IPC IRC UPC 2009 NSPC A112.1.2 Air Gaps in Plumbing 2004 2004 2004 2004 A112.1.3 Air Gap Fittings For Use With Plumbing, Appliances

More information

PERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 PLUMBING 02/18

PERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 PLUMBING 02/18 NAVFAC PTS-D20 (February 2018) ------------------------------ Preparing Activity: NAVFAC SUPERSEDING PTS-D20 (September 2016) PERFORMANCE TECHNICAL SPECIFICATION SECTION D20 PLUMBING 02/18 NOTE: This section

More information

BRADLEY HALO EMERGENCY PLUMBING FIXTURES

BRADLEY HALO EMERGENCY PLUMBING FIXTURES BRADLEY HALO EMERGENCY PLUMBING FIXTURES Bradley Halo Emergency Plumbing Fixtures are a new generation in safety equipment, featuring separate supply and waste piping to eye/face wash, ergonomic hand activation

More information

PARTS STOCKED REPLACEMENT FAUCET BIBB SCREWS... SCREW ASSORTMENT MISC. 3 /8" BIBB LOC SCREW 1 /2" BIBB SCREW 1 /2" BIBB LOC SCREW 3 /8" BIBB SCREW

PARTS STOCKED REPLACEMENT FAUCET BIBB SCREWS... SCREW ASSORTMENT MISC. 3 /8 BIBB LOC SCREW 1 /2 BIBB SCREW 1 /2 BIBB LOC SCREW 3 /8 BIBB SCREW January 1, 2001 STOCKED REPLACEMENT FAUCET BIBB SCREWS... Parts-5L 3 /8" BIBB SCREW 6-32 GAUGE CHROME 35138- No. 1 3 /8" BIBB SCREW 10-24 GAUGE CHROME 35153- No. 16 3 /8" BIBB SCREW 8-32 GAUGE CHROME 35141-

More information

BALANCING VALVE CHECK VALVE WATER METER PRESSURE REDUCING VALVE SHUTOFF/ISOLATION VALVE SOLENOID VALVE ONE-WAY (ELECTRIC) STRAINER

BALANCING VALVE CHECK VALVE WATER METER PRESSURE REDUCING VALVE SHUTOFF/ISOLATION VALVE SOLENOID VALVE ONE-WAY (ELECTRIC) STRAINER AFF AG AST BHP BJH BOB BOJ BOP BOS CL COR CTB CTC CTJ CTW DIA DIM DN EL ETR FC FFA FFB FLA FLR FPS FT XXX-E ACW ABD AC AD BCO BPD CI CO CP CS DFU ESEW EWC FD DF GI HB HC HD ABOVE FINISH FLOOR ABOVE GROUND

More information

SECTION DOMESTIC WATER AND DRAINAGE PIPING SPECIALTIES

SECTION DOMESTIC WATER AND DRAINAGE PIPING SPECIALTIES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections

More information

2. All necessary storm and sanitary pumps shall be tied into emergency power, and sump levels shall be monitored electronically through the B.A.S.

2. All necessary storm and sanitary pumps shall be tied into emergency power, and sump levels shall be monitored electronically through the B.A.S. DIVISION 22 00 00 22 30 00 EQUIPMENT Page 1 of 10 22 30 00 EQUIPMENT 22 01 01 GENERAL REQUIREMENTS General 1. All plumbing shall comply with the B.C. Plumbing Code. 1. Avoid the use of storm pumps and

More information

WF2613 Classic Corner Washfountain with 9" Deep Bowl

WF2613 Classic Corner Washfountain with 9 Deep Bowl cupc Certified Available in a 54" Bowl Size 9" Deep Bowl, Designed for Heavy Duty Hand Washing Foot, Air Metering, Infrared or TouchTime Control Specifications Size and Capacity Accommodates three users

More information

CLINICAL SERVICES ADMINISTRATION (214)

CLINICAL SERVICES ADMINISTRATION (214) CLINICAL SERVICES ADMINISTRATION (214) 1 - M EDICAL SERVICE AREA 1 - OFDC2 - Interview Room A5075 Dispenser, Soap, Disposable 1 VV Disposable soap dispenser. One-handed dispensing operation. Designed to

More information

WF2613 Classic Corner Washfountain with 9" Deep Bowl

WF2613 Classic Corner Washfountain with 9 Deep Bowl cupc Certified Available in a 54" Bowl Size 9" Deep Bowl, Designed for Heavy Duty Hand Washing Reliable Foot, Air, TouchTime or Infrared Activations Specifications Size and Capacity Accommodates three

More information

JAMES P. KISSANE, ARCHITECT

JAMES P. KISSANE, ARCHITECT UNISEX RESTROOM 6" X 9" UNISEX H.C. RESTROOM SIGN; BLUE NOTE: THE FASTENING HARDWARE FOR THE WALL BRACKETS FOR THE AND THE URINAL AND GRAB BARS MUST BE ABLE TO SUPPORT A 300 LB. WEIGHT. CONTRACTOR IS REQUIRED

More information

WATER HAMMER ARRESTORS & MISC. SPECIALTIES

WATER HAMMER ARRESTORS & MISC. SPECIALTIES TABLE OF CONTENTS Pictorial Index Water Hammer Arrestors Certification Sizing & Placement Backwater Valves Typical Installations Trap Seal Primers Compliance Pressure & Flow Characteristics Typical Installations

More information

GARCIA GALUSKA DESOUSA Consulting Engineers

GARCIA GALUSKA DESOUSA Consulting Engineers L#58619/Page 1/November 1, 2017 PLUMBING Executive Summary: Presently, the Plumbing Systems serving the building are cold water, hot water, sanitary, waste and vent system, storm drain piping, and natural

More information

PLUMBING REQUIREMENTS

PLUMBING REQUIREMENTS PLUMBING REQUIREMENTS This handout is a compilation of the standard requirements based on the State Plumbing Code and City Ordinance for projects of this type. This information sheet does not contain all

More information

Project General Notes DESCRIPTION ABBREVIATIONS AIR CONDITIONER ABOVE FINISHED FLOOR BALANCING DAMPER

Project General Notes DESCRIPTION ABBREVIATIONS AIR CONDITIONER ABOVE FINISHED FLOOR BALANCING DAMPER G T D-X 000/000 DOMESTIC COLD WATER PIPE DOMESTIC HOT WATER PIPE DOMESTIC HOT WATER RETURN PIPE NATURAL GAS PIPE SANITARY VENT PIPE SANITARY PIPE DUCT SMOKE DETECTOR RELAY COIL THERMOSTAT TEMPERATURE SENSOR

More information

BuildingName The Description of the Project P DOCUMENTS

BuildingName The Description of the Project P DOCUMENTS P00000000 0000 DOCUMENTS ARCHITECTURE, ENGINEERING AND CONSTRUCTION ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION

More information

BRADLEY HALO EMERGENCY PLUMBING FIXTURES (Short Form Version)

BRADLEY HALO EMERGENCY PLUMBING FIXTURES (Short Form Version) BRADLEY HALO EMERGENCY PLUMBING FIXTURES (Short Form Version) Bradley Halo Emergency Plumbing Fixtures are a new generation in safety equipment, featuring separate supply and waste piping to eye/face wash,

More information

SCHOOL DISTRICT PALM BEACH COUNTY BUILDING DEPARTMENT PLAN REVIEW CHECK LIST -- PLUMBING

SCHOOL DISTRICT PALM BEACH COUNTY BUILDING DEPARTMENT PLAN REVIEW CHECK LIST -- PLUMBING SCHOOL DISTRICT PALM BEACH COUNTY BUILDING DEPARTMENT PLAN REVIEW CHECK LIST -- PLUMBING 3300 SUMMIT BOULEVARD WEST PALM BEACH, FLORIDA 33406 TEL (561) 688-7687 FAX (561) 688-7654 http://www.palmbeach.k12.fl.us/fm/bd/index.htm

More information

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING. A. This Section includes the following sanitary drainage piping specialties:

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING. A. This Section includes the following sanitary drainage piping specialties: SECTION 221319 - SANITARY WASTE PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following sanitary drainage piping specialties: 1. Backwater valves. 2. Cleanouts. 3. Floor

More information

Moen Commercial Products Eco-Performance Product Guide

Moen Commercial Products Eco-Performance Product Guide Moen Commercial Products Eco-Performance Product Guide Learn how the use of MOEN Commercial Products What is LEED? The Leadership in Energy and Environmental Design (LEED) Green Building Rating System

More information

D & L A.D.A. SOLUTIONS 448 WEST MAIN ST. AUBURN,WA (800) HOUR FAX (206) FROM THE PARTS PEOPLE. SUPPLY and MFG.

D & L A.D.A. SOLUTIONS 448 WEST MAIN ST. AUBURN,WA (800) HOUR FAX (206) FROM THE PARTS PEOPLE. SUPPLY and MFG. D & L SUPPLY and MFG. 448 WEST MAIN ST. AUBURN,WA 98001 1(800)872-9577 24 HOUR FAX (206)939-6908 A.D.A. SOLUTIONS FROM THE PARTS PEOPLE A.D.A. AND YOU The Americans with Disabilities Act (A.D.A.), signed

More information

Plumbing and Drainage

Plumbing and Drainage Dufferin-Peel Catholic District School Board STANDARD TEXT FOR Plumbing and Drainage for ELEMENTARY AND SECONDARY SCHOOLS Prepared by the Plant Department Formatted by the Design Department THE INFORMATION

More information

WAL-RICH CORPORATION SINCE 1950

WAL-RICH CORPORATION SINCE 1950 STEAM SPECIALTIES ANGLE STEAM RADIATOR VALVES 0408102 1/2 1 10 0408104 3/4 1 6 0408002 1" 1 4 0408004 1 1/4" 1 2 0408006 1 1/2 1 2 - Brass - Imported STRAIGHT STEAM RADIATOR GATE VALVES 0409002 1" 1 4

More information

The Water Efficiency Company. Vitreous China Fixtures

The Water Efficiency Company. Vitreous China Fixtures The Water Efficiency Company Vitreous China Fixtures A Reputation for Quality, Performance and Sustainability Long before LEED and the sustainability movement emerged, Sloan was developing and producing

More information

8 Kitchen Gooseneck. 4 Lavatory/Shower. 8 Shower. Adjustable Garden Tub. Diverter Spring & Spool Diverter Knob Plastic Aerator Speedy Locknut

8 Kitchen Gooseneck. 4 Lavatory/Shower. 8 Shower. Adjustable Garden Tub. Diverter Spring & Spool Diverter Knob Plastic Aerator Speedy Locknut 8 Kitchen 8 Kitchen Gooseneck 4 Kitchen 10979 Chrome 10991 Chrome 10991W White 10987 Chrome 4 Lavatory 4 Lavatory/Shower 8 Tub/Shower 10983 Chrome 10983W White 10988 Chrome 10981 Chrome 4 Tub/Shower 8

More information

LC500. Patient Care Unit, 29", Fixed Water Closet. Specifi cations Standard Equipment

LC500. Patient Care Unit, 29, Fixed Water Closet. Specifi cations Standard Equipment Combination Lavatory Water Closet Module Durable Epoxy-coated Stainless Steel Cabinetry Large, Conveniently Located s for Easy Installation and Maintenance Specifi cations Standard Equipment Cabinet Stationary

More information

WALL MOUNTED SHOWER SYSTEMS

WALL MOUNTED SHOWER SYSTEMS WALL MOUNTED SHOWER SYSTEMS Wall mounted shower systems for schools, institutions, clubs, industrial and shipboard applications. Thermostatic, pressure balanced, or single temperature models Single or

More information

WF3204. Extra Height 54" Terreon Semi-Circular Washfountain. Specifications

WF3204. Extra Height 54 Terreon Semi-Circular Washfountain. Specifications cupc Certified 3 Rim Height 9" Deep Designed for Heavy Duty Hand Washing Reliable Air, TouchTime or Infrared activations Vandal Resistant - Easy to Clean Specifications Size and Capacity 3 floor to bowl

More information

ICP Plumbing Exam. Name: Carefully read each question and then circle the letter of the best answer.

ICP Plumbing Exam. Name: Carefully read each question and then circle the letter of the best answer. ICP Plumbing Exam Name: Date: Score: Carefully read each question and then circle the letter of the best answer. 1. A 1 inch diameter faucet, where the inside edge of the spout opening is 2.5 inches away

More information

University of New Hampshire Scholars' Repository

University of New Hampshire Scholars' Repository University of New Hampshire University of New Hampshire Scholars' Repository Division 22 Plumbing Chapter 5 Technical Construction and Renovation Standards Fall 9-8-2018 224000 - Plumbing Stephanie L.

More information

PERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 PLUMBING 02/18

PERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 PLUMBING 02/18 NAVFAC PTS-D20 (February 2018) ------------------------------ Preparing Activity: NAVFAC SUPERSEDING PTS-D20 (September 2016) PERFORMANCE TECHNICAL SPECIFICATION SECTION D20 PLUMBING 02/18 NOTE: This section

More information

TMV45 & TMV80 Standard Thermostatic Mixing Valves

TMV45 & TMV80 Standard Thermostatic Mixing Valves Reliable liquid-filled thermostat Integral strainer checkstops on inlets Adjustable set point within temperature range Accurate temperature control Positive shutoff of hot supply when cold supply is lost

More information

Work Order Number PERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20

Work Order Number PERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 NAVFAC PTS-D20 (February 2018) ------------------------------ Preparing Activity: NAVFAC SUPERSEDING PTS-D20 (September 2016) PERFORMANCE TECHNICAL SPECIFICATION SECTION D20 PLUMBING 02/18 NOTE: This section

More information

Read Only Document Not For Distribution

Read Only Document Not For Distribution Chapter 9 Indirect Waste Piping and Special Wastes 9.1 INDIRECT WASTES 9.1.1 General Drains from fixtures, fixture compartments, equipment, appliances, appurtenances, and other devices requiring protection

More information

Wholesalers List Price Book. Effective Date: February 1, Fixtures WEP. Manual Products WLP HEALTHMINDER. Products HM. Genuine MicroPlumb

Wholesalers List Price Book. Effective Date: February 1, Fixtures WEP. Manual Products WLP HEALTHMINDER. Products HM. Genuine MicroPlumb Fixtures WEP Sensor-Activated Optima Systems OLP Manual Products WLP Manual Repair Parts & Kits CLP Electronic Repair Parts & Kits ELP 2015 HEALTHMINDER Products HM Headquarters 10500 Seymour Avenue Franklin

More information

TUBS & SURROUNDS FIBERGLASS TUB STANDARD FIBERGLASS GARDEN TUB

TUBS & SURROUNDS FIBERGLASS TUB STANDARD FIBERGLASS GARDEN TUB TUBS & SURROUNDS FIBERGLASS TUB STANDARD One-piece design for a clean, simple design; left, right, or center drain. 309525 54 x 28 Center White 309530 54 x 28 Center Bone 309535 54 x 28 LH Bone 309540

More information

Appendix B. Symbols for Drawings. Table B.1. Air moving devices and ductwork symbols. Air Movement. Fans. Axial flow fan.

Appendix B. Symbols for Drawings. Table B.1. Air moving devices and ductwork symbols. Air Movement. Fans. Axial flow fan. Appendix B Symbols for Drawings Table B.1 Air moving devices and ductwork symbols Air Movement Fans Axial flow fan Centrifugal fan Propeller fan Intake roof ventilator (supply) Exhaust roof ventilator

More information

WAW-2311 WAW-2322 WAW SERIES LAVATORIES

WAW-2311 WAW-2322 WAW SERIES LAVATORIES COMMERCIAL PRODUCT GUIDE PLUMBING FIXTURES & ACCESSORIES Willoughby Industries has manufactured commercial grade stainless steel and solid surface plumbing products for more than 65 years. Our focus is

More information

BRADLEY CORPORATION WASH FOUNTAINS Page 1 of 8

BRADLEY CORPORATION WASH FOUNTAINS Page 1 of 8 BRADLEY WASHFOUNTAINS Bradley Corporation, a leader in the manufacture of fixtures and plumbing products, provides a variety of commercial wash fountains for every commercial and industrial need. Constructed

More information

SN2003, SN2023, SN2004, SN2024 Sentry Semi-Circular Shallow Bowl Washfountain

SN2003, SN2023, SN2004, SN2024 Sentry Semi-Circular Shallow Bowl Washfountain SN2003, SN2023, SN2004, SN2024 cupc Certified Reliable Push Button Activated Air Metering, Infrared, or TouchTime Control Available in a 54" or 36" Bowl Size Wall-Mounted or Floor-Mounted Standard Height

More information

COMMERCIAL VOLUME PLUMBING

COMMERCIAL VOLUME PLUMBING COMMERCIAL VOLUME 03 PLUMBING 2 SPEAKMAN.COM FIXTURES DESIGNED WITH QUALITY IN MIND A book of superior quality, thoughtful innovation, and unrivaled performance. These fixtures exist to endure the demands

More information

Special Requirements For Health Care Facilities

Special Requirements For Health Care Facilities Chapter 14 Special Requirements For Health Care Facilities 14.1 GENERAL This Chapter applies to special fixtures and systems that occur in health care facilities and to the special plumbing requirements

More information

Gulfport, Mississippi 21 May 2007

Gulfport, Mississippi 21 May 2007 G PLUMBING GENERAL REQUIREMENTS The D-BC shall design the plumbing system to comply with this criteria and the Plumbing Code. Piping shall be shown on the same plan as the fixtures being served. Pipe size

More information