EQSL TECHNICAL CATALOGUE AIR COOLED WATER CHILLER UNITS AXIAL FANS. Models: 300 V2 F V2 F16. Cooling capacity: 299 to 1310 KW
|
|
- Jacob Hopkins
- 5 years ago
- Views:
Transcription
1 TECHNICAL CATALOGUE EQSL Air Cooled Water Chillers Models: 300 V2 F V2 F16 Cooling capacity: 299 to 1310 KW ref Rev.100
2 Thank you for trusting in Hitecsa Products. Our company has been offering the market an extended range of specialized units for air conditioning and cooling installations for over 30 years. Our approach is based on efficiency, adaptability, usability and practical solutions. This has been the hallmark of our product catalogue. The versatility of our factory allows us to contribute solutions, almost tailored to each project s specifications, in search of a solution to every problem that arises in design and implementation of air conditioning installations. From all of us at Hiplus Aire Acondicionado, once again, thank you very much 2
3 GENERAL CHARACTERISTICS... 4 EQSL SERIES... 4 EQSL MODELS... 4 OPERATING LIMITS... 5 TECHNICAL SPECIFICATIONS... 9 MP.COM MICROPROCESSOR CONTROL SYSTEM OPTIONALS PUMP KITS HYDRONIC PUMPS PERFORMACE CHARTS OTHER OPTIONALS KIT "BRINE" KIT LNO KIT XLS HIGH PRESSURE EC AXIAL FANS TECHNICAL SPECIFICATIONS PARTIAL HEAT RECOVERY SYSTEM PARTIAL HEAT RECOVERY HYDRAULIC CIRCUIT DIAGRAM TOTAL HEAT RECOVERY SYSTEM TOTAL HEAT RECOVERY HYDRAULIC CIRCUIT DIAGRAM DIMENSIONS MODELS MODELS MODELS MODELS MODEL MODEL MODELS
4 GENERAL CHARACTERISTICS Packaged air cooled liquid chillers for chilled water production. The machines are made with weather resistant materials and suitable for outdoor installation. Framework with sections of thick steel for high resistance to the greatest stress during handling and transport. Machines supply fully assembled with refrigerant charge and control systems. The installation requires electrical and hydraulic connections only allowing high costs and time reduction. Final assembly on all machines before shipment including running test, reading and monitoring of operating parameters, alarms simulation and visual check. Design, assembly and test as per the Company Quality Assurance program in full compliance with ISO 9001:2008. Environmental Management System Certification according to ISO 14001:2004. The machines are in full compliance with European Directive 2006/42EC, 2006/95EC, 2004/108EC, 97/23EC and subsequent amendments. EQSL SERIES Machines equipped with condensing coils in "W" position, screw compressors, axial fans and shell and tube evaporator. Horizontal air suction and vertical air delivery. Cooling capacity : KW. EQSL MODELS EQSL 520 V2 F10 Cabinet size 2 Number of compressors 520 Cooling capacity in KW under standard conditions 4
5 OPERATING LIMITS Cooling Production of chilled water Operating limits diagram for chilled water production according to the ambient temperature and chilled water outlet temperature. OPERATING CONDITIONS A Operating conditions for which the unit s cooling capacity can be measured with the electronic selection program. OPERATING CONDITIONS B Operating conditions for which the unit s cooling capacity has to be measured by our commercial and sales department. These values are indicative. Operating temperatures are influenced by a series of variables, such as: Working conditions. Thermal load. Active power stages. Cleanliness of the heat exchanging coils. Microprocessor regulation. TOTAL HEAT RECOVERY The system is totally controlled by the microprocessor and the heating capacity which is supplied depends on the microprocessor set C hot water outlet temperature range 3 8 C Δt range between water inlet/outlet PARTIAL HEAT RECOVERY The system is not regulated and the heating capacity which is supplied depends on the machine s working conditions C Range of hot water outlet temperature C Δt range between water intake/outlet. ANTIFREEZE MIXTURES Antifreeze mixtures must be used when the conditions are expected to produce outlet chilled water below 5 C. PROPYLENE GLYCOL Chilled water outlet Temp. Percentage of mixture (in weight) ETHYLENE GLYCOL Chilled water outlet Temp. Percentage of mixture (in weight) Attention: ºC % ºC % These values refer to the machine s operating temperature. The use of antifreeze mixtures may result in a decrease in the unit s performance. Please, use the selection program to obtain the effective performance. STORAGE TEMPERATURE If the unit is not installed immediately after reception and is to be stored for an extended period of time, please, make sure that storage temperatures range between -30 and 50ºC and the unit is not subject to condensation or direct sunlight. 5
6 FRAMEWORK Base, self supporting frame and panelling in steel plate with protective surfaces treatment in compliance with UNI ISO 9227/ASTMB117 and ISO 7253, and painted with epoxy powders. COMPRESSORS - Twin screw semi-hermetic compressors with highly efficient screw profile and high peripheral speed, optimized for R134a refrigerant. - Integrated discharge check valve. - Flanged-on oil separator. - Integrated safety relief valve (overpressure inner valve). - Replaceable cartridge oil filter. - Oil flow switch. - Valves for oil filling and discharge. - Oil sight glass. Electronic protection device that includes : - Electric motor thermal protection via internal winding temperature sensors. - Phase sequence electronic relay. - Sensor on refrigerant discharge for temperature monitoring. - 2-pole 3-phase electric motor with Part-Winding starting from model 300 V2 F06 to model 530 V2 F08 included. - 2-pole 3-phase electric motor with Star / Delta starting from model 540 V2 F08 to model 1310 V2 F16 included. - Stepless capacity control, % for each compressor. - Crankcase heater. - Terminal box with IP54 class enclosure. - Rubber supports. EVAPORATOR - Single pass type shell and tube evaporator, optimized for R134a refrigerant. - Tubes with a helical rifled internal surface. - Intermediate baffles positioned to ensure optimum speed of the fluid and low pressure drops. - Single circuit on water side and independent circuits, one for each compressor, on refrigerant side. - Shell, header, tube sheets, made of carbon steel, tubes in Cu. - Anticondensate insulation made of polyurethane. - Temperature sensors on water inlet and outlet. - Antifreeze heater. - Hydraulic connections with grooved end arranged for flexible joint (the flexible joint and the adapter pipe are optional accessories). CONDENSING COIL Heat exchanger coil with high efficiency aluminum fins, specifically developed to provide high heat transfer and lower pressure drops. The combination of two factors, special tubes and fins, allows to optimally combine the following aspects: - Maximum capacity relative to the size of the exchanger. - Minimum charge of refrigerant. - Reduction of the air flow required for the heat exchange. Frame in galvanized steel. FAN SECTIONS - Axial fans with sickle-shaped blades, fan guard and optimized for low noise levels. - External rotor AC type electric motor with stepless variable speed for condensing pressure control with phase-cut electronic controller. - IP54 class enclosure. COOLING CIRCUIT - Electronic expansion valve that allows high performance and system efficiency thanks to a timely and accurate response to changes in temperature and pressure. - Energy reserve module for the electronic expansion valve to allow the closure of the valve in the event of lack of power supply. - Sight glass. - Filter dryer on liquid line. - Service valves on liquid line. - Service valves on compressor gas discharge. - Double safety valve (only one in function) on high and low pressure side. - The system include two safety valves with manual changeover system. - Pressure transducers with indication, control and protection functions, on low and high refrigerant pressure and oil pressure. - High pressure safety switch with manual reset. - Pressure gauge on high and low pressure. - Refrigerant circuit with copper tubing with anticondensate insulation of the suction line. - Plastic capillary hoses for pressure sensors connection. R134a refrigerant charge. ELECTRICAL PANEL In accordance with EN norms, suitable for outdoor installation, IP54 class enclosure, complete with: - Main switch with door lock safety. - Fuses for each compressor. - Magnetothermic switches for fans. - Fuses for water pumps (if scheduled). - Contactors for each load. - Compressor Part-Winding starting system from model 290 V2 F06 to model 570 V2 F10 included. - Compressor Star / Delta starting system from model 620 V2 F10 to model 1510 V2 F24 included. - Transformer for auxiliary circuit and microprocessor supply. - Panel with machine controls. - Power supply 400/3/50. CONTROL SYSTEM MP.COM microprocessor system with graphic symbol for control and monitor of operating and alarms status. The system includes: - Voltage free contact slot for remote general alarm. - Service hour meter for main components. - Non-volatile flash memory for data storage. - Menu with password security. - LAN connection. HYDRAULIC CONNECTIONS - Heat exchangers threaded hydraulic connections ISO 228/1 G M, available up to a diameter of 3" included. - Pipes threaded hydraulic connections ISO 7/1 R, available up to a diameter of 3" included. - The hydraulic connections with flange (FL) are not supplied with counter flange. - The hydraulic connections with grooved end are not supplied with flexible joint (optional accessory). 6
7 ACCESSORIES - Pump KIT. Includes chilled water flow safety switch. - Kit LNO for reduction of noise emissions. - Kit XLS for extreme reduction of noise emissions. - High pressure axial fans equipped with EC motors. - Partial heat recovery system. (not available for units with double cooling circuits) - Voltage free contact slot for partial heat recovery with pump activation. - Partial Heat Recovery System. - Total Heat Recovery System. - Kit "BRINE A" for chilled water production up to -6ºC. (this accessory is not compatible with the Total Heat Recovery System). - Kit "BRINE B" for chilled water production below -6ºC. (this accessory is not compatible with the Total Heat Recovery System). Warning: with the BRINE KIT, it is mandatory to use an antifreeze mixture. Please, refer to the Antifreeze Mixture chapter in this manual. The use of antifreeze mixtures may result in a decrease in the unit s performance. (PLEASE, CONTACT OUR COMMERCIAL DEPARTMENT) OTHER ACCESSORIES - Chilled water safety flow switch. - Analog flowmeter (0 1V / 4-20mA) for measurement and display of the evaporator water flow. The optional accessory stops the machine in case of water flow anomalies. The installation of the analog flowmeter excludes the installation of the water flow switch. The optional accessory involves the installation of the microprocessor expansion module "1" and its driver. - Hydraulic connections of the evaporator and total heat reclaim heat exchangers with flexible joint with adapter pipe (solder type). Flexible joint with adapter for flange connection (FL). The counterflange is not supplied. - Anti-freeze kit for hydraulic pipes of the pumping group. - Compressor thermal protection relay. - Power factor capacitor for motor compressor - cosφ Supply network control relay. Measurement and control of the minimum line voltage, over line voltage, phase loss, phase unbalance and phases sequence of the unit. The system stops the machine in case of operative conditions malfunction. - Compressor operation signalling through additional voltage free contact. - Demand limit. The optional accessory limits the electrical absorption of the unit according to a set point value with a reduction of the machine engaged load (activation of the compressor capacity control or, in extreme cases, stop of a compressor). The optional accessory involves the installation of the microprocessor expansion module "2" and its driver. - Analog set point compensation (0-1V). Available only for machines with single refrigerant circuit. The optional accessory involves the installation of the microprocessor expansion module "1" and its driver. Available compensation systems: - Compensation according to ambient temperature (the system foresees the installation of the ambient temperature sensor). - Compensation according to an external analog signal. - Stop valve on compressor suction. - Air/gas heat exchanger protection net. - Air/gas heat exchanger in special execution (please contact our Commercial Dept.). - Spring antivibrating supports for the machine- supplied not installed. - Rubber supports for the machine supplied not installed. - Electrical panel heating system (suggested in case of operation of the machine with negative ambient temperature). - Ambient temperature sensor. The ambient temperature sensor requires the installation of the microprocessor expansion module "1" and its driver. 7
8 OTHER ACCESSORIES MP.COM microprocessor accessories : - Remote terminal. - Line voltage indication. - Line current indication. - Clock card for alarms date and time displaying and storing. - Serial port RCcom, MBUS/JBUS. - Serial port LON. - Serial port BACnet for Ethernet SNMP TCP/IP. - Serial port BACnet for MS/TP. - Serial port for GSM modem. - Data logger for the memorization of the intervened alarms. Additional module "1" with the following inputs / outputs: INPUTS : - Analog flowmeter / Line voltage indication / Line current indication. - Compensation / Line voltage indication / Line current indication. - Ambient air temperature. - The additional module "1" is already included with Water Pumps and Total heat reclaim optional accessories. Additional module "2" with the following inputs / outputs: INPUTS : - Demand limit. The accessory requires an additional digital input for enabling. - External alarm 1. - External alarm 2. OUTPUTS : - Programmable alarm 1. - Programmable alarm 2. - Programmable alarm 3. - General alarm 2. - Driver for the additional module. Warning : We reserve the right to accept possible combinations of optional accessories installed on the unit. 8
9 TECHNICAL SPECIFICATIONS MODEL 300 V2 F V2 F V2 F V2 F V2 F08 CAPACITIES Cooling capacities (1) KW EER KW / KW 2,78 2,77 2,62 2,78 2,77 ESSER 3,06 3,03 3,20 3,18 3,10 REFRIGERANT Type R-134a Load Kg Gas circuits PCA COMPRESSOR Type Twin Screw Number Absorbed power KW Operating current A Starting current A Maximum absorbed current A Power steps % % % % % EVAPORATOR FAN Type AXIAL Nominal air flow m 3 /h Number Absorbed power (1) KW 11,6 11,7 11,7 15,4 15,4 Maximum absorbed current A 23,4 23,4 23,4 31,2 31,2 EVAPORATOR EXCHANGER Water load lt Water flow m 3 /h 51,3 54,1 57,5 67,1 73,9 Maximum water flow m 3 /h Pressure drop KPa Pollution factor m²*k/kw 0,043 0,043 0,043 0,043 0,043 ELECTRICAL CHARACTERISTICS Voltage V/ph/Hz 400 / III / 50 NOISE LEVELS Acoustic pressure 1m (4) db(a) 73,1 71,7 72,0 71,6 76,0 Acoustic power (5) db(a) 92,9 91,4 91,8 91,9 96,2 DIMENSIONS AND WEIGHT Length mm Width mm Height mm Net weight Kg Intake/Outlet chilled water temperature 12/7 C; Ambient air temperature 35 C Eurovent standards. 2. Intake/Outlet chilled water temperature 12/7 C; Intake/Outlet hot water temperature 40/45 C Eurovent standards. 3. Gross values - Intake/Outlet chilled water temperature 12/7 C; Ambient air temperature 35 C and Intake/Outlet hot water temperature 40/45 C. 4. Avergae sound pressure levels [Lpm] measured 1m away, in accordance to ISO EN Acoustic power levels [Lw] in accordance to ISO EN
10 MODEL 480 V2 F V2 F V2 F V2 F V2 F08 CAPACITIES Cooling capacities (1) KW EER KW / KW 2,76 2,76 2,78 2,79 2,78 ESSER 3,13 3,17 3,23 3,21 3,17 REFRIGERANT Type R-134a Load Kg Gas circuits PCA COMPRESSOR Type Twin Screw Number Absorbed power KW Operating current A Starting current A Maximum absorbed current A Power steps % % % % % EVAPORATOR FAN Type AXIAL Nominal air flow m 3 /h Number Absorbed power (1) KW 15,4 15,4 15,5 15,6 15,6 Maximum absorbed current A 31,2 31,2 31,2 31,2 31,2 EVAPORATOR EXCHANGER Water load lt Water flow m 3 /h 81,8 89,8 93,3 96,7 105,0 Maximum water flow m 3 /h Pressure drop KPa Pollution factor m²*k/kw 0,043 0,043 0,043 0,043 0,043 ELECTRICAL CHARACTERISTICS Voltage V/ph/Hz 400 / III / 50 NOISE LEVELS Acoustic pressure 1m (4) db(a) 76,2 76,4 76,4 76,4 78,0 Acoustic power (5) db(a) 96,4 96,7 96,7 96,7 98,2 DIMENSIONS AND WEIGHT Length mm Width mm Height mm Net weight Kg Intake/Outlet chilled water temperature 12/7 C; Ambient air temperature 35 C Eurovent standards. 2. Intake/Outlet chilled water temperature 12/7 C; Intake/Outlet hot water temperature 40/45 C Eurovent standards. 3. Gross values - Intake/Outlet chilled water temperature 12/7 C; Ambient air temperature 35 C and Intake/Outlet hot water temperature 40/45 C. 4. Avergae sound pressure levels [Lpm] measured 1m away, in accordance to ISO EN Acoustic power levels [Lw] in accordance to ISO EN
11 MODEL 650 V2 F V2 F V2 F V2 F V2 F12 CAPACITIES Cooling capacities (1) KW EER KW / KW 2,77 2,78 2,77 2,76 2,77 ESSER 3,24 3,18 3,18 3,19 3,26 REFRIGERANT Type R-134a Load Kg Gas circuits PCA COMPRESSOR Type Twin Screw Number Absorbed power KW Operating current A Starting current A Maximum absorbed current A Power steps % % % % % EVAPORATOR FAN Type AXIAL Nominal air flow m 3 /h Number Absorbed power (1) KW 15,6 17,6 19,5 20,1 23,4 Maximum absorbed current A 31,2 35,1 39,0 39,0 46,8 EVAPORATOR EXCHANGER Water load lt Water flow m 3 /h Maximum water flow m 3 /h Pressure drop KPa Pollution factor m²*k/kw 0,043 0,043 0,043 0,043 0,043 ELECTRICAL CHARACTERISTICS Voltage V/ph/Hz 400 / III / 50 NOISE LEVELS Acoustic pressure 1m (4) db(a) 79,2 79,4 80,0 79,7 78,8 Acoustic power (5) db(a) 99,4 100,1 100,7 100,4 99,8 DIMENSIONS AND WEIGHT Length mm Width mm Height mm Net weight Kg Intake/Outlet chilled water temperature 12/7 C; Ambient air temperature 35 C Eurovent standards. 2. Intake/Outlet chilled water temperature 12/7 C; Intake/Outlet hot water temperature 40/45 C Eurovent standards. 3. Gross values - Intake/Outlet chilled water temperature 12/7 C; Ambient air temperature 35 C and Intake/Outlet hot water temperature 40/45 C. 4. Average sound pressure levels [Lpm] measured 1m away, in accordance to ISO EN Acoustic power levels [Lw] in accordance to ISO EN
12 MODEL 950 V2 F V2 F V2 F V2 F V2 F16 CAPACITIES Cooling capacities (1) KW EER KW / KW 2,76 2,75 2,76 2,77 2,76 ESSER 3,32 3,29 3,34 3,32 3,30 REFRIGERANT Type R-134a Load Kg Gas circuits PCA COMPRESSOR Type Twin Screw Number Absorbed power KW Operating current A Starting current A Maximum absorbed current A Power steps % % % % % EVAPORATOR FAN Type AXIAL Nominal air flow m 3 /h Number Absorbed power (1) KW 23,4 30,9 30,9 30,9 31,2 Maximum absorbed current A 46,8 62,4 62,4 62,4 62,4 EVAPORATOR EXCHANGER Water load lt Water flow m 3 /h Maximum water flow m 3 /h Pressure drop KPa Pollution factor m²*k/kw 0,043 0,043 0,043 0,043 0,043 ELECTRICAL CHARACTERISTICS Voltage V/ph/Hz 400 / III / 50 NOISE LEVELS Acoustic pressure 1m (4) db(a) 78,8 81,1 81,1 81,1 81,4 Acoustic power (5) db(a) 99,8 102,9 102,9 102,9 103,2 DIMENSIONS AND WEIGHT Length mm Width mm Height mm Net weight Kg Intake/Outlet chilled water temperature 12/7 C; Ambient air temperature 35 C Eurovent standards. 2. Intake/Outlet chilled water temperature 12/7 C; Intake/Outlet hot water temperature 40/45 C Eurovent standards. 3. Gross values - Intake/Outlet chilled water temperature 12/7 C; Ambient air temperature 35 C and Intake/Outlet hot water temperature 40/45 C. 4. Avergae sound pressure levels [Lpm] measured 1m away, in accordance to ISO EN Acoustic power levels [Lw] in accordance to ISO EN
13 MP.COM MICROPROCESSOR CONTROL SYSTEM The MP.COM microprocessor control system is equipped with an 8-key terminal and backlit graphic display on which all information in different languages or easily identifiable symbols are displayed. The system counts with a "flash" memory that preserves the information even in absence of an external power supply. FUNCTIONS 13
14 REMOTE CONTROLS/ALARMS Remote Controls/Alarms. Voltage free Control/Alarm. 14
15 A CLASS A ENERGY EFFICIENCY OPTIONALS PUMP KITS Pump KIT. It is possible to install only one of the following options: Standard version Pump KIT. - One pump. - Two pumps operating simultaneously. STANDARD VERSION SINGLE PUMP KIT HYDRAULIC DIAGRAM STANDARD VERSION TWIN PUMP KIT HYDRAULIC DIAGRAM The pumping group includes: - Control and working electric equipment contained in the chiller electric board and directly managed by the microprocessor control. - Valve on suction line. - Valve on discharge line. - In-line type water pump. - Safety flow switch (excludes the installation of the water flow switch on the evaporator) Ref Rev
16 Reserve pump version Pump KIT. - One operating pump and one reserve pump. - Two operating pumps and one reserve pump. All pump kits are factory installed. This optional does not affect the dimensions of the unit. RESERVE PUMP VERSION SINGLE OPERATING PUMP HYDRAULIC DIAGRAM RESERVE PUMP VERSION TWIN OPERATING PUMPS HYDRAULIC DIAGRAM Pumping group with two centrifugal pumps: - Control and working electric equipment contained in the chiller electric board and directly managed by the microprocessor control. - Valves on suction line. - Check valves on discharge line. - In-line type water pump. - GP-LN... Centrifugal pump with 4 poles electric motor. - Safety flow switch (excludes the installation of the water flow switch on the evaporator). The reserve pump automatically intervenes in case of failure of one of the main pumps. An automatic changeover system is foreseen in order to equalize the water pump working hours. 16
17 TECHNICAL SPECIFICATIONS STANDARD VERSION PUMP KIT STANDARD VERSION SINGLE PUMP TWIN MED. PUMPS WATER FLOW RATE Minimum water flow rate m 3 /h Maximum water flow rate m 3 /h DISCHARGE HEAD At minimum water flow rate KPa At maximum water flow rate KPa WATER PUMPS (1) Absorbed power KW 5,5 11,0 Absorbed current A 11,4 22,8 POWER SUPPLY Voltage V/ph/Hz 400 / III / 50 EMPTY WEIGHT Single pump version (2) Kg RESERVE PUMP VERSION PUMP KIT RESERVE PUMP VERSION WATER FLOW RATE OPERATING PUMP SINGLE PUMP RESERVE PUMP TWIN MED. PUMPS OPERATING PUMP RESERVE PUMP Minimum water flow rate m 3 /h Maximum water flow rate m 3 /h DISCHARGE HEAD At minimum water flow rate KPa At maximum water flow rate KPa WATER PUMPS (1) Absorbed power KW 5,5 5,5 11,0 5,5 Absorbed current A 11,4 11,4 22,8 11,4 POWER SUPPLY Voltage V/ph/Hz 400 / III / 50 EMPTY WEIGHT Operating pump (2) Kg Reserve pump (2) Kg (1) The values shown refer only to the working pump. (2) Add this value to the chiller s weight. Note: The noise generated by the pumps does not increase the chillers overall acoustic pressure levels. 17
18 HYDRONIC PUMPS PERFORMACE CHARTS STANDARD VERSION PUMP KIT SINGLE OPERATING PUMP RESERVE PUMP TWIN PUMP VERSION PUMP KIT TWIN MED. OPERATING PUMPS RESERVE PUMP 18
19 OTHER OPTIONALS KIT "BRINE" The accessory allows the production of glycol solution leaving the machine down to a temperature of -12 C. This KIT includes: - Set of the working parameters. Warning: with the "BRINE" KIT optional, it is mandatory to use antifreeze mixtures. The use of antifreeze mixtures may result in a decrease in the unit s performance. KIT LNO This optional is available as an accessory with the purpose of obtaining a reduction in noise emissions. This KIT includes: - Set of the working parameters. - A cap made with noise-absorbing material on each compressor. There are 3 different types of LNO KITS: KIT LNO 100% No air flow reduction. Noise reduction is obtained through a different working set of the microprocessor control and an acoustic insulation of the noise source. KIT LNO 85% Noise reduction is obtained through a different working set of the microprocessor control, an acoustic insulation of the noise source and a reduction of the condenser coil air flow at 85% of the nominal value. KIT LNO 70% Noise reduction is obtained through a different working set of the microprocessor control, an acoustic insulation of the noise source and a reduction of the condenser coil air flow at 70% of the nominal value. Consider that a condenser coil air flow reduction induces a minor cooling capacity of the machine and a major energy consumption of the compressor. Warning: To obtain the effective working conditions of cooling capacity and noise reduction for unit equipped with LNO KIT, please refer to the selection program. KIT XLS This optional accessory is available to obtain an extreme noise reduction on the machine. The versions equipped with XLS KIT have the following characteristics : - Set of the working parameters. - Machine frame and panels insulated with soundproofing material. - Soundproof cap on each compressor. - Compressor soundproof box. Consider that a condenser coil air flow reduction induces a minor cooling capacity of the machine and a major energy consumption of the compressor. Warning : To obtain the effective working conditions of cooling capacity and noise reduction for unit equipped with XLS KIT, please refer to the selection program. 19
20 Sound pressure (dba) Power input (%) EQSL HIGH PRESSURE EC AXIAL FANS The "EC" axial fans are equipped with a brushless type synchronous motor with integrated electronic commutated system. The motor rotation control is obtained with the EC system (Electronic Commutation) that manages the motor according to the 0-10V proportional signal coming from the microprocessor control. Characteristics of EC motors: - No electromagnetic noise. - Efficiency 83-86%. - Minimum power input. The following is a characteristics comparison between an "AC" asynchronous electric motor with phase-cut control (voltage controller) and "EC" brushless type synchronous motor. Electric motor revolutions (%RPM) Electric motor revolutions (RPM) Sound pressure level 1 meter far in free field conditions. Warning: The graphs are referred to working condition with null available static pressure (0 Pa). 20
21 TECHNICAL SPECIFICATIONS MODEL 300 V2 F V2 F V2 F V2 F V2 F08 PARTIAL HEAT RECOVERY Heating capacity KW 59,5 62,7 66,7 77,8 85,6 Heat recovery water flow m 3 /h 10,2 10,8 11,5 13,4 14,7 Heat recovery pressure drop KPa 6,6 7,3 8,2 8,9 4,4 TOTAL HEAT RECOVERY Cooling capacity KW Compressor power input KW Heating capacity KW Heat recovery water flow m 3 /h 68,5 72,4 78,4 89,5 99,0 Heat recovery pressure drop KPa LNO KIT 100% Fan absorbed power KW 11,6 11,7 11,7 15,4 15,4 Total air flow (1) m 3 /h Acoustic power level dba 90,9 89,4 89,8 89,9 94,2 Acoustic pressure level dba 71,1 69,7 70,0 69,6 74,0 LNO KIT 85% Fan absorbed power KW 9,8 9,9 9,9 13,1 13,1 Total air flow (1) m 3 /h Acoustic power level dba 89,9 88,4 88,8 88,9 93,2 Acoustic pressure level dba 70,1 68,7 69,0 68,6 73,0 LNO KIT 70% Absorbed power KW 8,1 8,2 8,2 10,8 10,8 Total air flow (1) m 3 /h Acoustic power level dba 86,9 85,4 85,8 85,9 90,2 Acoustic pressure level dba 67,1 65,7 66,0 65,6 70,0 XLS KIT Fan absorbed power KW 8,1 8,2 8,2 10,8 10,8 Total air flow (1) m 3 /h Acoustic power level dba 83,9 82,4 82,8 82,9 87,2 Acoustic pressure level dba 64,1 62,7 63,0 62,6 67,0 **PLEASE, CONSULT WITH OUR COMMERCIAL DEPARTMENT 21
22 MODEL 480 V2 F V2 F V2 F V2 F V2 F08 PARTIAL HEAT RECOVERY Heating capacity KW 94,7 104,0 108,0 112,0 121,0 Heat recovery water flow m 3 /h 16,3 17,9 18,6 19,2 20,9 Heat recovery pressure drop KPa 4,1 3,8 3,5 2,6 3,1 TOTAL HEAT RECOVERY Cooling capacity KW Compressor power input KW Heating capacity KW Heat recovery water flow m 3 /h 108,0 118,0 126,0 130,0 132,0 Heat recovery pressure drop KPa LNO KIT 100% Fan absorbed power KW 15,4 15,4 15,5 15,6 15,6 Total air flow m 3 /h Acoustic power level (1) dba 94,4 94,7 94,7 94,7 96,2 Acoustic pressure level (2) dba 74,2 74,4 74,4 74,4 76,0 LNO KIT 85% Fan absorbed power KW 13,1 13,1 13,2 13,3 13,3 Total air flow m 3 /h Acoustic power level (1) dba 93,4 93,7 93,7 93,7 95,2 Acoustic pressure level (2) dba 73,2 73,4 73,4 73,4 75,0 LNO KIT 70% Fan absorbed power KW 10,8 10,8 10,9 10,9 10,9 Total air flow m 3 /h Acoustic power level (1) dba 90,4 90,7 90,7 90,7 92,2 Acoustic pressure level (2) dba 70,2 70,4 70,4 70,4 72,0 XLS KIT Fan absorbed power KW 10,8 10,8 10,9 10,9 10,9 Total air flow m 3 /h Acoustic power level (1) dba 87,4 87,7 87,7 87,7 89,2 Acoustic pressure level (2) dba 67,2 67,4 67,4 67,4 69,0 **PLEASE, CONSULT WITH OUR COMMERCIAL DEPARTMENT 22
23 MODEL 650 V2 F V2 F V2 F V2 F V2 F12 PARTIAL HEAT RECOVERY Heating capacity KW Heat recovery water flow m 3 /h 22,1 24,2 26,3 29,2 31,0 Heat recovery pressure drop KPa 2,8 2,7 3,2 2,6 2,5 TOTAL HEAT RECOVERY Cooling capacity KW Compressor power input KW Heating capacity KW Heat recovery water flow m 3 /h Heat recovery pressure drop KPa LNO KIT 100% Fan absorbed power KW 15,6 17,6 19,5 20,1 23,4 Total air flow m 3 /h Acoustic power level (1) dba 97,4 98,1 98,7 98,4 97,8 Acoustic pressure level (2) dba 77,2 77,4 78,0 77,7 76,8 LNO KIT 85% Fan absorbed power KW 13,3 14,9 16,6 17,1 19,9 Total air flow m 3 /h Acoustic power level (1) dba 96,4 97,1 97,7 97,4 96,8 Acoustic pressure level (2) dba 76,2 76,4 77,0 76,7 75,8 LNO KIT 70% Fan absorbed power KW 10,9 12,3 13,7 14,1 16,4 Total air flow m 3 /h Acoustic power level (1) dba 93,4 94,1 94,7 94,4 93,8 Acoustic pressure level (2) dba 73,2 73,4 74,0 73,7 72,8 XLS KIT Fan absorbed power KW 10,9 12,3 13,7 14,1 16,4 Total air flow m 3 /h Acoustic power level (1) dba 90,4 91,1 91,7 91,4 90,8 Acoustic pressure level (2) dba 70,2 70,4 71,0 70,7 69,8 **PLEASE, CONSULT WITH OUR COMMERCIAL DEPARTMENT 23
24 MODEL 950 V2 F V2 F V2 F V2 F V2 F16 PARTIAL HEAT RECOVERY Heating capacity KW Heat recovery water flow m 3 /h 32,5 36,4 38,4 40,5 44,9 Heat recovery pressure drop KPa 3,3 4,1 4,6 5,1 6,2 TOTAL HEAT RECOVERY Cooling capacity KW Compressor power input KW Heating capacity KW Heat recovery water flow m 3 /h Heat recovery pressure drop KPa LNO KIT 100% Fan absorbed power KW 23,4 30,9 30,9 30,9 31,2 Total air flow (1) m 3 /h Acoustic power level dba 97,8 100,9 100,9 100,9 101,2 Acoustic pressure level dba 76,8 79,1 79,1 79,1 79,4 LNO KIT 85% Fan absorbed power KW 19,9 26,2 26,2 26,2 26,5 Total air flow (1) m 3 /h Acoustic power level dba 96,8 99,9 99,9 99,9 100,2 Acoustic pressure level dba 75,8 78,1 78,1 78,1 78,4 LNO KIT 70% Absorbed power KW 16,4 21,6 21,6 21,6 21,8 Total air flow (1) m 3 /h Acoustic power level dba 93,8 96,9 96,9 96,9 97,2 Acoustic pressure level dba 72,8 75,1 75,1 75,1 75,4 XLS KIT Fan absorbed power KW 16,4 21,6 21,6 21,6 21,8 Total air flow (1) m 3 /h Acoustic power level dba 90,8 93,9 93,9 93,9 94,2 Acoustic pressure level dba 69,8 72,1 72,1 72,1 72,4 **PLEASE, CONSULT WITH OUR COMMERCIAL DEPARTMENT 24
25 PARTIAL HEAT RECOVERY SYSTEM **This optional accessory is not compatible with double cooling circuit units. The partial heat recovery exchanger is installed before the main condenser. The system is not regulated and the control is ON-OFF type. The heat recovery system s operation is subject to the supply and demand of cooling capacity. The system includes: - Copper brazed plate type heat exchanger with cover plates, plates and connections in AISI 316 stainless steel. - Anticondensate insulation made of polyurethane. - Upon request voltage free contact slot for partial heat recovery water pump activation. The water pump is not supplied. The heating capacity which is supplied depends on the kind of refrigerant gas which is used and working temperatures. The heat exchangers can produce hot water up to the maximum temperature of C and according to the working conditions of the unit. PARTIAL HEAT RECOVERY HYDRAULIC CIRCUIT DIAGRAM 25
26 TOTAL HEAT RECOVERY SYSTEM The total heat recovery exchange is installed in parallel to the main condenser. The system is totally controlled by the microprocessor and the control is ON-OFF type. The heat recovery system s operation is subject to the supply demand of cooling capacity. For each refrigerant circuit the system includes: - Shell and tube condenser optimized for R134a refrigerant with shell, header, tube sheets made of carbon steel, tubes in Cu. - Anticondensate insulation made of polyurethane. - Antifreeze heater. - Water temperature probe on heat reclaim water inlet. - Diverter valve. - Non return valve. - Liquid receiver. - Safety valve. **Upon request: voltage free contact for total heat recovery water pump activation. The water pump is not supplied. The parallel connection of the hydraulic circuit is at Customer care and the water temperature probe is supplied not installed. TOTAL HEAT RECOVERY HYDRAULIC CIRCUIT DIAGRAM 26
27 DIMENSIONS MODELS
28 MODELS
29 MODELS
30 MODELS
31 MODEL
32 MODEL
33 MODELS
34 34
35 HIPLUS AIRE ACONDICIONADO S.L. Masia Torrents, 2 Tel Fax Vilanova i la Geltrú Barcelona, Spain 35
EQEF TECHNICAL CATALOGUE AIR COOLED WATER CHILLERS AXIAL FANS WITH FREE-COOLING SYSTEM
TECHNICAL CATALOGUE EQEF Water Chillers with Free Cooling System Models:60.1 60.2 70.1 70.2 90.1 90.2 120.1 120.2 135.1 150.1 190.2 200.1 200.2 240.2 270.2 300.2 Cooling capacities: 69,7 to 331 KW 02.16
More informationkw COOLING kw HEATING
Heat pump water/water liquid chillers for indoor installation. Inversion on hydraulic circuit. 394 1505 kw COOLING 477 1976 kw HEATING technicalcatalogue T_FRGSCRWP_0913_GB INDEX GENERAL CHARACTERISTICS...
More informationGLIDER EVO FREE GLIDER EVO FREE GLYCOL FREECOOLING. rcgroupairconditioning
: Packaged air cooled liquid chillers with free-cooling system for outdoor installation, equipped with screw compressors and axial fans Cooling Capacity: 314 1343 Free-Cooling Capacity: 308 938 GLYCOL
More informationGLIDER EVO GLIDER EVO. rcgroupairconditioning
: Packaged air cooled liquid chillers for outdoor installation equipped with screw compressors and axial fans Cooling Capacity: 300 1313 rcgroupairconditioning R134a SHELL C MIN FETURES ir cooled liquid
More informationglider evo cla glider evo cla A-CLASS rcgroupairconditioning
Industrial GLIDER EVO CL: Packaged air cooled liquid chillers in class energy efficiency for outdoor installation, equipped with screw compressors and axial fans Cooling Capacity: 284 1513 -CLSS rcgroupairconditioning
More informationGLIDER EVO CLA GLIDER EVO CLA HIGHEFFICIENCY ACLASS. rcgroupairconditioning
GLIDER EVO CL GLIDER EVO CL: Packaged air cooled liquid chillers in class energy efficiency for outdoor installation, equipped with screw compressors and axial fans Cooling Capacity: 282 1513 HIGHEFFICIENCY
More informationPackaged air cooled liquid chillers for outdoor installation kw. technicalcatalogue T_EGL_1012_GB
Packaged air cooled liquid chillers for outdoor installation 42 574 kw technicalcatalogue T_EGL_1012_GB INDEX EUROVENT CERTIFICATION... 3 GENERAL CHARACTERISTICS... 3 SERIES IDENTIFICATION... 3 MODEL IDENTIFICATION...
More informationEQPHU PACKAGED HEAT PUMP AIR/ WATER LIQUID CHILLER FOR OUTDOOR INSTALLATION
TECHNICAL CATALOGE EQPHU PACKAGED HEAT PUMP AIR/ WATER LIQUID CHILLER FOR OUTDOOR INSTALLATION Cooling capacity 197 to 267 kw Heating capacity 219 to 301 kw 03.16 207622 Rev100 Thank you for trust in Hitecsa
More informationEQUH PF PACKAGED HEAT PUMP AIR/ WATER LIQUID CHILLER FOR INDOOR INSTALLATION
TECHNICAL CATALOGE EQUH PF PACKAGED HEAT PUMP AIR/ WATER LIQUID CHILLER FOR INDOOR INSTALLATION Cooling capacity 19,1 to 225 kw Heating capacity 23,7 to 324 kw Thank you for trust in Hitecsa Product. From
More informationkw. technicalcatalogue
Packaged air cooled liquid chillers in A class energy efficiency for outdoor installation equipped with scroll compressor and microchannel condensing coils 108 876 kw technicalcatalogue T_PYXCLA_0413_GB
More information44,9 202,0 kw. technicalcatalogue
Packaged air cooled liquid chillers for outdoor installation equipped with scroll compressor and microchannel condensing coils 44,9 202,0 kw technicalcatalogue T_PYXU_0413_GB INDEX EUROVENT CERTIFICATION...
More informationMULTIPLO PF Multifunction chillers for indoor installation. Cooling Capacity: kw Heating Capacity: kw
Multifunction chillers for indoor installation. Cooling Capacity: 22 222 Heating Capacity: 25 236 Scroll compressors EC Plug Fans Plate type heat exchangers EER up to 3,12 COP up to 3,84 ESEER up to 4,01
More informationpyxis pyxisa NEW rcgroupairconditioning
Industrial : Packaged air cooled liquid chillers for outdoor installation equipped with scroll compressors and microchannel condensing coils Cooling capacity: 119,0 808,0 PLTE C rcgroupairconditioning
More informationFRIGO SCREW CLA PLUS Packaged water cooled liquid chillers in A+ class energy efficiency for indoor installation. Cooling Capacity: kw
Packaged water cooled liquid chillers in + class energy efficiency for indoor installation. Cooling Capacity: 625 1179 kw Screw compressors Shell and tube heat exchangers Double refrigerant circuit EER
More informationpyxis u pyxis ua NEW rcgroupairconditioning
Industrial : Packaged air cooled liquid chillers for outdoor installation equipped with scroll compressors and microchannel condensing coils Cooling capacity: 44,9 200,0 rcgroupairconditioning R410 C PLTE
More informationpyxis cla pyxis cla A-CLASS NEW rcgroupairconditioning
Industrial PYXIS CL: Packaged air cooled liquid chillers in class energy efficiency for outdoor installation, equipped with scroll compressor and microchannel condensing coils Cooling Capacity: 108 876
More informationunico pf unico pf rcgroupairconditioning
: ckaged air cooled liquid chillers for indoor installation, equipped with scroll compressors and plug fan Cooling Capacity: 19,6 264 unico pf PLTE rcgroupairconditioning R410 E C MIN FETURES ir cooled
More informationkw. technicalcatalogue
Packaged air cooled liquid chillers for outdoor installation equipped with oil-free centrifugal compressors with magnetic levitation bearings, flooded evaporator and microchannel condensing coils. 280
More informationPYXIS U PYXIS U. rcgroupairconditioning
Industrial : Packaged air cooled liquid chillers for outdoor installation equipped with scroll compressors and microchannel condensing coils Cooling capacity: 44 284 rcgroupairconditioning MIN FETURES
More informationpyxis hp "u" pyxis hp "u" IDEA NEW rcgroupairconditioning
Comfort PYXIS HP U : ir / water reversible heat pumps for outdoor installation, equipped with scroll compressors and axial fans Cooling Capacity: 42,3 195,0 Heating Capacity: 47,1 222,0 NEW IDE R410 rcgroupairconditioning
More informationKELVIN Clim F497. Kelvin air conditioning
KELVIN Clim F497 Cooling Capacity: 400 ~ 1260 kw Free-Cooling Capacity: 497 ~ 1492 kw Packaged air cooled liquid chillers with free-cooling system in A class energy efficiency for outdoor installation,
More informationUNICO TURBO FL FREE UNICO TURBO FL FREE HIGHEFFICIENCY INVERTER ACLASS FREECOOLING LOWNOISE. rcgroupairconditioning
: Packaged air cooled liquid chillers with free-cooling system in class energy efficiency for outdoor installation, equipped with oil-free centrifugal compressors with magnetic levitation bearings, flooded
More informationunico turbo FL unico turbo FL LOW NOISE A-CLASS INVERTER rcgroupairconditioning
: Packaged air cooled liquid chillers in class energy efficiency for outdoor installation, equipped with oil-free centrifugal compressors with magnetic levitation bearings, flooded evaporator and microchannel
More information21,8 222 kw COOLING 25,2 236 kw HEATING
Air cooled multifunction chillers 21,8 222 kw COOLING 25,2 236 kw HEATING technicalcatalogue T_MLTPF_0413_GB INDEX GENERAL CHARACTERISTICS... 3 SERIES IDENTIFICATION... 3 MODEL IDENTIFICATION... 3 WORKING
More informationKelvin air conditioning. KELVIN Clim W280. Cooling Capacity: 280 ~ 1840 kw
Cooling Capacity: 280 ~ 1840 kw Water cooled liquid chillers in A class energy efficiency for indoor installation, equipped with oil-free centrifugal compressors with magnetic levitation bearings, flooded
More informationNext P kw COOLING 5 93 kw HEATING. technicalcatalogue. Heat pump air conditioners with upflow air delivery T_NXTP_0411_GB
Next P 6 112 kw COOLING 5 93 kw HEATING Heat pump air conditioners with upflow air delivery technicalcatalogue T_NXTP_0411_GB INDEX GENERAL CHARACTERISTICS... 3 SERIES IDENTIFICATION... 4 MODEL IDENTIFICATION...
More informationKelvin air conditioning. KELVIN Clim W250. Cooling Capacity: 250 ~ 1240 kw
Cooling Capacity: 250 ~ 1240 kw Water cooled liquid chillers in A class energy efficiency for indoor installation, equipped with oil-free centrifugal compressors with magnetic levitation bearings, flooded
More informationrcgroup.it Flooded evaporator Low noise Minimum starting current EER up to 5,25 ESEER up to 8,88
Packaged water cooled liquid chillers in class energy efficiency for indoor installation, equipped with turbo oil-free compressors. Cooling Capacity: 280 1840 Flooded evaporator Low noise Minimum starting
More informationEASY_R R407C. Air cooled liquid chillers and heat pumps equipped with scroll compressor and axial fans. 5,2 41,5 kw T_ESY_R_0508_GB
R407C EASY_R Air cooled liquid chillers and heat pumps equipped with scroll compressor and axial fans 5,2 41,5 kw T_ESY_R_0508_GB EASY_R R407C INDEX WORKING LIMITS... 3 SERIES IDENTIFICATION... 4 MODEL
More informationnemo a hp rcgroupairconditioning R410A
NEMO A HP: Motoevaporating heat pumps for indoor installation, equipped with scroll compressor and plate heat exchanger Cooling Capacity: 5,5 25,0 Heating Capacity: 6,4 29,3 nemo a hp PLATE rcgroupairconditioning
More informationrcgroup.it Flooded evaporator Refrigerant charge HFO1234ze, GWP<1 Low noise Minimum starting current EER up to 5,41 ESEER up to 9,10
Packaged water cooled liquid chillers in class energy efficiency for indoor installation, equipped with turbo oil-free compressors. Cooling Capacity: 250 1240 Flooded evaporator Refrigerant charge HFO1234ze,
More informationNEXT EVO DXR410A NEXT EVO DX NEW SOFTWARE. rcgroupairconditioning
: Direct expansion close control air conditioners with up-flow or down-flow air delivery. Cooling Capacity: 7 102 NEW SOFTWARE R410A rcgroupairconditioning E C A C UP FLOW DOWN FLOW MAIN FEATURES Precision
More informationSMART. 4,9 49,5 kw. Air cooled liquid chillers and heat pumps equipped with scroll compressor and axial fans T_SMT_0609_GB
T_SMT_0609_GB 4,9 49,5 kw Air cooled liquid chillers and heat pumps equipped with scroll compressor and axial fans INDEX SERIES IDENTIFICATION... 3 MODEL IDENTIFICATION... 3 CE CONFORMITY... 3 WORKING
More informationNEXT DL NEXT DL. rcgroupairconditioning
NEXT DL: Close control air conditioners with displacement air delivery with remote condenser, or built in water cooled condenser or for chilled water feeding Cooling capacity: 7,7 51,4 NEXT DL rcgroupairconditioning
More informationNext MTR kw. technicalcatalogue. Air conditioners for Metrology Labs with upflow air delivery T_NXTMTR_0511_GB
6 15 kw Next MTR Air conditioners for Metrology Labs with upflow air delivery technicalcatalogue T_NXTMTR_0511_GB INDEX GENERAL CHARACTERISTICS... 3 SERIES IDENTIFICATION... 3 MODEL IDENTIFICATION... 3
More informationSLS 1202 to With or without total heat recovery. u Air Cooled Screw Chillers. 262 to 916 kw. Engineering Data Manual
u Air Cooled Screw Chillers SLS 1202 to 4004 With or without total heat recovery 262 to 916 kw Engineering Data Manual EDM SLS407-A.4GB Date : December 2008 Supersedes : TM SLS407-A.3GB/11.06 Specifications
More informationNEMO A Split-system liquid chillers for indoor installation. Cooling Capacity: 5 26 kw
Split-system liquid chillers for indoor installation. Cooling Capacity: 5 26 Built-in pumping group Scroll compressor Plate type heat exchanger EER up to 2,88 rcgroup.it Chillers : Motoevaporating units
More information4,5 22,5 kw. technicalcatalogue. Air-conditioned server-racks for direct installation into the room T_CLSEVO_0113_GB
4,5 22,5 kw Air-conditioned server-racks for direct installation into the room technicalcatalogue T_CLSEVO_0113_GB INDEX HIGHLIGHTS... 3 PLANT TYPE... 3 GENERAL CHARACTERISTICS... 5 SERIES IDENTIFICATION...
More informationfrigo turbo FL Chillers
frigo turbo FL FRIGO TURBO FL Packaged water cooled liquid chillers in A class energy efficiency for indoor installation, equipped with oil-free centrifugal compressors with magnetic levitation bearings,
More informationCOOLROW Close control air conditioners for In-Row installation Cooling Capacity: kw
COOLROW Close control air conditioners for In-Row installation Cooling Capacity: 14 61 Available in versions equipped with: - BLDC inverter scroll compressor on board of the unit - Chilled water feeding
More informationAIR COOLED CHILLERS FOR OUTDOOR INSTALLATION WITH INTEGRATED FREE COOLING MULTISCROLL SERIES
AIR COOLED CHILLERS FOR OUTDOOR INSTALLATION WITH INTEGRATED FREE COOLING MULTISCROLL SERIES COOLING CAPACITY FROM 76 TO 612 Kw 1 AND 2 COOLING CIRCUITS RAE 1702 F Kc + P2 28 Above picture is only indicative
More informationnext p dw next p dw rcgroupairconditioning
NEXT P: Heat pump air conditioners with upflow air delivery with built-in water/gas exhaustion heat exchanger Cooling Capacity: 7,5 7,0 Heating Capacity: 7, 04,0 A C rcgroupairconditioning R40A PLATE E
More informationGPE Kc UNITS FOR 4-PIPE SYSTEMS WITH SCROLL COMPRESSORS. COOLING CAPACITY FROM 77 TO 426 kw - 2 COOLING CIRCUITS. GPE 802 Kc + CF + GP + MV + P1
UNITS FOR 4-PIPE SYSTEMS WITH SCROLL COMPRESSORS COOLING CAPACITY FROM 77 TO 426 kw - 2 COOLING CIRCUITS GPE 802 Kc + CF + GP + MV + P1 130 Above picture is only indicative and is not binding. AIR R-410A
More informationRAH Ka AIR COOLED WATER CHILLERS WITH SCREW COMPRESSORS AND AXIAL FANS. COOLING CAPACITY FROM 387 TO 1207 kw 1 AND 2 COOLING CIRCUITS
AIR COOLED WATER CHILLERS WITH SCREW COMPRESSORS AND AXIAL FANS COOLING CAPACITY FROM 387 TO 1207 kw 1 AND 2 COOLING CIRCUITS RAH 602 Ka + CF + GP 62 Above picture is only indicative and is not binding.
More informationEpsilon Echos kw. General information Air-Water unit with scroll compressors driven by DC inverter. Unique selling points
Epsilon Echos+ 5 38 kw General information Air-Water unit with scroll compressors driven by DC inverter Configuration /LN: Low noise unit /HP: Reversible heat pump /LE /HP: Reversible condensing unit Unique
More informationZeta Rev LN HP Prochill Bluebox Print Date: 07/17/2017
Zeta Rev LN HP 10.2 Configured unit accessories 1PS - One user-side pump with tank LN - Low noise RG - Condensation control with fan speed regulator CSP - Set point compensation depending on external air
More informationTechnical Catalogue. Air-Cooled Liquid Chillers with screw compressors Nominal cooling capacity: kw 50 Hz
EN Technical Catalogue Air-Cooled Liquid Chillers with screw compressors Nominal cooling capacity: 321-1308 kw 50 Hz EKV/BS business Air cooled water chillers for outdoor installation. Flexibility in the
More informationAIR COOLED FREE-COOLING CHILLERS WITH SCROLL COMPRESSORS AND AXIAL FANS
RAE 1352 F.K + MV AIR R-407C FC Series RAE... F.K Cooling capacity from 77 to 289 kw - 2 circuits The air cooled chillers of RAE... F.K series, are designed for outdoor installation and are particularly
More informationRAS Kp AIR COOLED CHILLERS WITH RECIPROCATING COMPRESSORS AND AXIAL FANS REFRIGERANT R290 LIQUID CHILLERS - AIR COOLED AIR
AIR COOLED CHILLERS WITH RECIPROCATING COMPRESSORS AND AXIAL FANS REFRIGERANT R290 46 Above picture is only indicative and is not binding AIR FC The packaged air cooled chillers of RAS Kp series are suitable
More informationAIR COOLED CHILLERS WITH SCROLL COMPRESSORS AND CENTRIFUGAL FANS
RAE 1402 C O K AIR R-407C Series RAE... C K Cooling capacity from 81 to 250 kw - 2 circuits The air cooled chillers of RAE C K series, with centrifugal fans, are designed for indoor installation and are
More informationAIR COOLED CHILLERS WITH SCROLL COMPRESSORS AND CENTRIFUGAL FANS
RAE 201 C K RAE 482 C K AIR R-407C Series RAE... C K from 19 to 83 kw - 1 and 2 circuits The air cooled chillers of RAE... C K series, with centrifugal fans, are designed for indoor installation and are
More informationERAH MC Ka. Range kw. AIR COOLED CHILLERS WITH SCREW COMPRESSORS AND AXIAL FANS FOR OUTDOOR INSTALLATION (Standard line)
ERAH MC Ka AIR COOLED CHILLERS WITH SCREW COMPRESSORS AND AXIAL FANS FOR OUTDOOR INSTALLATION (Standard line) Range 394-1220 kw Liquid chillers air condensing unit Package external installation Screw compressors
More informationKälte Klima. Air cooled liquid chiller Free-Cooling from 45 kw to 385 kw. Scroll Compressors SCAEY-FC DE 98
Air cooled liquid chiller Free-Cooling from 45 kw to 385 kw Scroll Compressors Series: SCAEY-FC Leaflet: DE 98 Issue: 01/16 Supersedes: 12/13 Identification code Index Index... pag. 2 Identification code...»
More informationAquaflair TRAC-TRAF-TRAH
Aquaflair TRAC-TRAF-TRAH 110 400 kw Air-cooled chillers, free-cooling chillers and heat pumps for mission critical applications Air-cooled chillers, free-cooling chillers and heat pumps with scroll compressors
More informationEKS/HE. MultiScroll Air-cooled liquid chillers High efficiency. Solution B - Base I - Integrata
EKS/HE Refrigerant R410A GWP=2.088 Scroll Compressor Shell & Tube exchanger Axial fan Brazed plate heat exchanger MultiScroll Air-cooled liquid chillers High efficiency Solution B - Base I - Integrata
More informationKälte Klima. Air cooled liquid chiller Free-Cooling from 45 kw to 365 kw. Scroll Compressors SCAEY-FC DE 98
Air cooled liquid chiller Free-Cooling from 45 kw to 365 kw Scroll Compressors Series: SCAEY-FC Leaflet: DE 98 Issue: 04/11 Supersedes: 12/10 Identification code Index Index... pag. 2 Identification code...»
More informationKälte Klima. Air cooled water chillers air cooled reversible heat pumps from 45 kw to 320 KW. Compressors Scroll SCAEY DE 88 04/11 12/10
Air cooled water chillers air cooled reversible heat pumps from 45 kw to 320 KW Compressors Scroll Serie: Series: Emissione: Issue: SCAEY Catalogo: Leaflet: Sostituisce: Supersedes: DE 88 04/11 12/10 Index
More informationWATER CHILLER UNITS AIR COOLED CONDENSER CENTRIFUGAL FANS HEAT PUMP. EWCBZ COOLING ONLY. EWCZ
WATER CHILLER UNITS AIR COOLED CONDENSER CENTRIFUGAL FANS HEAT PUMP. EWCBZ COOLING ONLY. EWCZ SERIES: EWCBZ - Heat pump MODELS: 70, 80, 00, 0, 60, 00, 40, 00, 50 COOLING CAPACITIES from 5,9 kw to 78,5
More informationCZT CZT. High efficiency air to water heat pumps with E.V.I. compressors E.V.I. HP OTHER VERSIONS ACCESSORIES
High efficiency air to water heat pumps with E.V.I. compressors infolinia: +48 691 262 691-15 C +63 C +43 C E.V.I. HP The series of high efficiency heat pumps has been specifically designed for use with
More informationLZT High efficiency air to water heat pumps with E.V.I. compressors
High efficiency air to water heat pumps with E.V.I. compressors -20 C +43 C +65 C E.V.I. C.O.P. 4,1 The series of high efficiency heat pumps has been specifically designed for use with radiant floor heating
More informationDYNACIAT LGN. Description. Split system Water chillers. High energy efficiency Compact and quiet Scroll compressors Brazed-plate heat exchangers
High energy efficiency Compact and quiet Scroll compressors Brazed-plate heat exchangers Self-adjusting electronic control Cooling capacity: 35 to 700 kw 410A Cooling Operation DYNACIAT - DYNACIAT POWER
More informationCHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 47 to 78 kw
TECHNICAL INSTRUCTIONS CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 47 to 78 kw CHGV CHGV 64 CHGV 72 CHGV 80 PHRV heat pump model also available May 2006 10 12 167 - GB - 00 MARKING
More informationTOTAL HEAT RECOVERY MULTI-PURPOSE HEAT PUMPS
TOTAL HEAT RECOVERY MULTI-PURPOSE HEAT PUMPS Energy saving thanks to a total recovery p Cooling Heating/DHW h Galletti multi-purpose heat pumps are total recovery units used for a simultaneous hot and
More informationnext evo cw next evo cw rcgroupairconditioning
: Close control air conditioners for chilled water feeding with upflow or downflow air delivery Cooling Capacity: 6,2 248,0 rcgroupairconditioning E C CHILLED WTER UP FLOW DOWN FLOW MIN FETURES Chilled
More informationLZA High efficiency air to water heat pumps with HP compressor
High efficiency air to water heat pumps with HP compressor -10 C +43 C +60 C HP C.O.P. 4,1 The series of high efficiency heat pumps has been specifically designed for use with radiant floor heating systems
More informationWater chillers water/water type SIGMA Technical information manual
Water chillers water/water type SIGMA Technical information manual 2 INDEX Technical features 1 Versions 3 Accessory versions 4 Technical data 7 Electrical data 11 Cooling capacity 12 Heating capacity
More informationBlue Box Epsilon Echos +
Blue Box Epsilon Echos + 5 38 kw General information Air-Water unit with scroll compressors driven by DC inverter Packaged version in 5 sizes Nominal cooling capacity (A35;W7): 6 26 kw Nominal heating
More informationGLIDER_. air cooled liquid chilled chillers / heat pumps
GLIDER_ cooling capacity 189,7 1613,1 heating capacity 203,1 1613,1 compressors screw refrigerant R134a fan type axial microprocessor MP.COM models 45 RC GROUP SpA C_GNR_0507 87 VERSIONS : GLIDER (R134a)
More informationAir cooled industrial chillers
Air cooled industrial chillers Main features R410A refrigerant Cooling capacity 5 175 kw Air cooled industrial chillers Models Versions HE High Efficiency Finned coil evaporators submerged in the storage
More information1
ST www.coldinnovation.it 1 INDEX Available versions...pag. 4 Structure of electro-galvanized and painted steel sheet...pag. 5 Ecological refrigerant R410A...pag. 5 Scroll compressors...pag. 6 Condenser
More informationAIR COOLED CHILLER FOR OUTDOOR INSTALLATION FROM 4,3 TO 35,1 kw
PROCESS CHILLERS AIR COOLED CHILLER FOR OUTDOOR INSTALLATION FROM 4,3 TO 35,1 kw climaveneta.com PROCESS CHILLERS MAXIMUM EFFICIENCY IN EVERY TYPE OF PROCESS APPLICATION Air cooled liquid chiller for outdoor
More informationCMA TECHNICAL MANUAL CONDENSING UNITS FOR OUTDOOR INSTALLATION O L S A F RA N
E S A RE F R E IG RA N T G TECHNICAL MANUAL -FRIEND Y CONDENSING UNITS FOR OUTDOOR INSTALLATION O L CMA C 2 The manufacturer declines all the responsabilities regarding inaccuracies contained in this manual,
More informationBRAN Residential chillers and heat pumps. Reversible unit, air source for outdoor installation 4,81-27,2 kw <<< BACK INDEX.
More information
B. Unit construction shall comply with ASHRAE 15 Safety Code, NEC, and ASME applicable codes (U.S.A. codes).
Guide Specifications PART 1 GENERAL 1.01 SYSTEM DESCRIPTION Microprocessor controlled, air-cooled liquid chiller utilizing scroll compressors, low sound fans, hydronic pump system and optional fluid storage
More informationCommercial and Technical Data
Chillers Commercial and Technical Data Air Cooled Single Circuit Condensing Unit» Wide capacity range (120 kw - 490 kw)» One refrigerant circuit with single screw compressor» Two sound versions available»
More informationTechnical Catalogue. Multi-Scroll Air-Cooled Liquid Chillers. Nominal cooling capacity: kw 50 Hz
EN Technical Catalogue Multi-Scroll Air-Cooled Liquid Chillers Nominal cooling capacity: 167-582 kw 50 Hz EKS/BS business The picture refers to the model: EKS - BP / BS/AS 2 The competitive choice Air
More informationAIR-COOLED LIQUID CHILLER FOR OUTSIDE INSTALLATION FROM 4,3 TO 35,1 kw
COMFORT CHILLERS AIR-COOLED LIQUID CHILLER FOR OUTSIDE INSTALLATION FROM 4,3 TO 35,1 kw climaveneta.com COMFORT CHILLERS PERFECT COMFORT AND MAXIMUM EFFICIENCY Air-cooled liquid chiller for outside installation
More informationARV.
ARV www.coldinnovation.it 1 INDEX Available versions...pag. 4 Structure of electro-galvanized and painted steel sheet...pag. 5 Ecological refrigerant R134a...pag. 5 Semi-hermetic screw compressor...pag.
More informationModular Air-cooled Chillers
Modular Air-cooled Chillers High Seasonal Efficiency (HSE) version Cooling capacity 48-232 kw Trane Flex Series Modular air/water chillers with axial EC fans, inverter driven scroll compressors and microchannel
More informationi-next DX kw FULL INVERTER direct expansion air conditioners for IT Cooling. To be matched with remote air-cooled condenser. rcitcooling.
CLOSE CONTROL AIR CONDITIONERS 3 140 kw FULL INVERTER direct expansion air conditioners for IT Cooling. To be matched with remote air-cooled condenser. The picture of the unit is indicative and may vary
More informationAir cooled chillers. Air cooled chillers with brushless oil-free compressors. RAC. Ka Series - 1 or 2 cooling circuits capacity from 300 to 1400 kw
Air cooled chillers with brushless oil-free compressors R-134a RAC. Ka Series - 1 or 2 cooling circuits capacity from 300 to 1400 kw External installation with very low sound level Cooling circuit with
More informationLDK LDK. Air to water chillers and heat pumps VERSIONS ACCESSORIES
Air to water chillers and heat pumps The water chillers range is an efficient and low-noise product designed for medium to big applications. The water chillers are suitable for water outlet temperatures
More informationnext DX.U.S* 052.Z2.H6.DC
next DX.U.S* 05.Z.H6.DC GENERAL CHARACTERISTICS Air conditioning unit with remote air cooled condenser, for computer rooms, any high-tech facility and offices. Units can run non-stop at 4x65 hours a year.
More informationTCHVZ TCEVZ
K20310EN ed. 3 TCHVZ 1200 31630 TCEVZ 1200 31630 Serie Z-Flow Macrosystem 171,9 1.629,2 kw TCHVZ - Water cooled water chillers with R134a ecological refrigerant. Semi-hermetic screw compressor range. TCEVZ
More informationBETA ECHOS. Air/water cooled chillers and heat pumps kw. General BETA ECHOS is a range of chillers and ductable air-water heat pumps.
Air/water cooled chillers and heat pumps 41 303 kw General BETA ECHOS is a range of chillers and ductable air-water heat pumps. Configurations HP: Reversible heat pump LE: For connection to remote evaporator
More informationCZT CZT E.V.I. High efficiency air to water heat pumps with E.V.I. compressors OTHER VERSIONS ACCESSORIES
High efficiency air to water heat pumps with E.V.I. compressors -15 C +63 C E.V.I. The series of high efficiency heat pumps has been specifically designed for use with radiant floor heating systems or
More informationBRH. Climaveneta Technical Bulletin. Water-cooled liquid chillers ,5-35,1 kw. Versatile High efficiency Maximum silent-running
Climaveneta Technical Bulletin BRH_0011_0121_201211_EN BRH r HFC R-410A 0011-0121 5,5-35,1 kw Water-cooled liquid chillers (The photo of the unit is indicative and may change depending on the model) Versatile
More informationMulti-pipe Units with Scroll Compressors. Model CMAA Cooling capacity kw Heating capacity kw
Multi-pipe Units with Scroll Compressors Model CMAA Cooling capacity 45-485 kw Heating capacity 50-670 kw CMAA multi-pipe units Simultaneous heating and cooling with one product Standard versions Acoustic
More informationEHW KH PF HIGH EFFICIENTY AIR CONDITONING UNITS TECHNICAL CATALOGUE
TECHNICAL CATALOGUE EHW KH PF HIGH EFFICIENTY AIR CONDITONING Models: 518 725 830 1036 1042 1657 Cooling Capacities: 18, 6 to 54, 4 KW Heating Capacities: 24, 1 to 71 KW 01.16 Ref. 207520 Rev. 101 INDEX
More informationLSA LSA A + Air cooled water chillers with axial fans VERSIONS ACCESSORIES
LS ir cooled water chillers with axial fans + LS The LS water chiller range has been designed for small and medium residential and commercial applications. They are suitable for generating chilled water
More informationSPECIFICATION GUIDE NEOSYS. Air-cooled Liquid Chiller for outdoor installation (NAC) Nominal cooling capacity: 200 to 460 kw
SPECIFICATION GUIDE NEOSYS Air-cooled Liquid Chiller for outdoor installation (NAC) Nominal cooling capacity: 200 to 460 kw Air-to-water Heat Pump for outdoor installation (NAH) Nominal cooling capacity:
More informationH4T R410A. refrigerant
H4T INDEX Polyvalent unit working modes...pag. 4 Available versions...pag. 4 Structure of electro-galvanized and painted steel sheet...pag. 5 Ecological refrigerant R410A...pag. 5 Scroll compressors...pag.
More informationROOF TOP TYPE UNITS CENTRIFUGAL FANS ENGINEERING DATA MANUAL MODELS Rev. 100
RCCA Cooling only RCCBA Heat pump ENGINEERING DATA MANUAL MODELS 1402 1602 2002 2402 3002 04.14 207402 Rev. 100 Thank you for trust in HITECSA Product. From our company we are offering to the market, for
More informationBHW INSTALLATION, OPERATION AND MAINTENANCE MANUAL MEDIUM STATIC PRESSURE DUCTABLE TYPE. Models:
INSTALLATION, OPERATION AND MAINTENANCE MANUAL BHW MEDIUM STATIC PRESSURE DUCTABLE TYPE Models: 174 205 358 410 515 720 724 Cooling capacities from 3,1 to 25 KW Heating capacities from 4,5 to 55,5 KW Thank
More informationAIR COOLED HEAT PUMP FOR OUTDOOR INSTALLATION FROM 4,2 TO 35,1 kw
COMFORT HEAT PUMPS AIR COOLED HEAT PUMP FOR OUTDOOR INSTALLATION FROM 4,2 TO 35,1 kw climaveneta.com COMFORT HEAT PUMPS PERFECT COMFORT AND MAXIMUM EFFICIENCY Air to water heat pump for outdoor installation,
More informationHYDROCIAT LW R407C. Water cooled chillers USE RANGE
Screw compressors CIAT dry direct expansion shell and tubes evaporator HPS equipment (High Power System) cooling or heating Heat recovery ENVIRONMENTALLY HFC R407C PROTECTION DE FRIENDLY L'ENVIRONNEMENT
More informationECV SP GUE ALO CAT ICAL TECHN
TECHNICAL CATALOGUE ECV SP TAILOR MADE FOR UNITS FITTED WITH VRF SYSTEMS Models: 1001 1502 1602 2003 2303 10.16 Ref. 207609 Rev.105 CONTENT INTRODUCTION... 3 GENERAL DESCRIPTION... 3 CABINET... 3 HEAT
More informationCHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 47 to 78 kw
TECHNICAL INSTRUCTIONS CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 47 to 78 kw CHGV 50 CHGV 64 CHGV 72 CHGV 80 PHRV heat pump model also available November 2007 10 12 167 - GB -
More informationCHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 21 to 39 kw
TECHNICAL INSTRUCTIONS CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 21 to 39 kw CHGV 22 CHGV 2 CHGV 32 CHGV 40 PHRV heat pump model also available September 2007 10 12 11 - GB - 02
More information30GH Air-Cooled Liquid Chillers 30GH Nominal cooling capacity kw
Air-Cooled Liquid Chillers Nominal cooling capacity 21-94 kw Carrier is participating in the Eurovent Certification Programme. Products are as listed in the Eurovent Directory of Certified Products. The
More information