AD-15 Parts Manual 24 VAC Phase 5

Transcription

1 AD-15 Parts Manual 24 VAC Phase 5 For models as of July 1, 2002 American Dryer Corporation 88 Currant Road Fall River, MA Telephone: (508) / Fax: (508) techsupport@amdry.com ADC Part No

2 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following FOR YOUR SAFETY caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. POUR VOTRE SÉCURITÉ Ne pas entreposer ni utiliser d essence ni d autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: AD-15 DATE OF PURCHASE MODEL NO. RESELLER S NAME Serial Number(s) Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) or telephone your order directly to the ADC Parts Department at (508) Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. IMPORTANT NOTE TO PURCHASER Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

3 Table of Contents OPL Control Door Assembly... 3 Coin Control Door Assembly... 4 Phase 5 Coin Microprocessor Control Panel Assembly... 5 Phase 5 OPL Microprocessor Control Panel Assembly... 6 Phase 5 Coin and OPL Microprocessor Control Box Assembly... 7 Control Vault Assembly... 8 Dual Timer Tap Touch Controls... 9 Non-Microprocessor Coin Meter Control Panel Assembly Non-Microprocessor Control Box Assembly Slide Meter Case Assembly Main Door Assembly Main Door Switch Assembly Front Panel Assembly Basket (Tumbler)/Support Assembly OPL Drop Lint Door Assembly Coin Drop Lint Door Assembly Lint Trap Assembly Basket (Tumbler) Bearing Assembly Idler Bearing Assembly Non-Reversing Motor Mount Assembly... 22, 23 Sensor Bracket Assemblies... 24, 25 Direct Spark Ignition (DSI) Burner Assembly... 26, 27 Electric Oven Assembly... 28, 29 DSI Control Module Assembly Single-Phase (1ø) Motor, Electric Relay Panel Assembly Phase (3ø) Motor, Electric Relay Panel Assembly... 32

4 Slide Meter Control Box Assembly Steam Coil/Air-Operated Steam Damper Assembly... 34, 35 Steam Coil/Mechanical Steam Damper Assembly... 36, 37 Outer Top/Back Guard Assembly Coin Meter Replacement Parts Transformer Usage Listing for Gas/Steam Dryers Transformer Usage Listing for Electric Dryers Electric Oven Component Application Chart Additional Parts Available... 43

5 OPL Control Door Assembly ADC Logo ONLY (with double adhesive tape) Logo Double Tape Kit...Not Illustrated White Control Door (includes illus. nos. 2 and 3) Coral Blue Control Door (includes illus. nos. 2 and 3) Ivory Control Door (includes illus. nos. 2 and 3) Stainless Steel Control Door (includes illus. nos. 2 and 3) Neoprene Sponge Tape (sold by the foot) #10-16 x 3/4 TORX Plus BTN Type Control Door Rod Catch Control Door Rod Retainer Clip Control Door Support Rod #10-32 x 1/2 Phillips Machine Screw #10-32 Multi-Thread U-Nut Telephone: (508) / 3

6 Coin Control Door Assembly High Security MK-100 Lock Assembly with Key (for coin models Only) MK-100 Key ONLY Lock Cam ONLY ADC Logo with Tape Double Sided Tape Kit...Not Illustrated White High Security Control Door Assembly with Black Trim (includes illus. nos. 4 through 7) Stainless Steel High Security Control Door with Black Trim (includes illus. nos. 4 through 7) Coral Blue High Security Door Assembly with Black Trim (includes illus. nos. 4 through 7) Ivory High Security Door Assembly with Black Trim (includes illus. nos. 4 through 7) Top Black Trim Strip with Lock Hole Sponge Tape (sold by the foot) /4-20 with 3/4 Free Spin Wash Nut #10-16 x 3/4 TORX Plus BTN Type Control Door Rod Catch Control Door Rod Retainer Clip Control Door Support Rod 4 American Dryer Corporation

7 Phase 5 Coin Microprocessor Control Panel Assembly Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4 through 6 and 11) Phase 5 Coin Control Panel Assembly ONLY with Battery Option (includes illus. nos. 1, 2, 4 through 6 and 11) Coin Control Panel ONLY Coin Control Panel with Battery Bracket #10-16 x 1/2 Hex Head Crimptite Screw Phase 5 Coin Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4 Phillips Round Head Machine Screw Microprocessor Coin Acceptor with Optical Switch Optic Switch ONLY * Optic Switch Connector ONLY * Microprocessor Socket ONLY Pin/Socket Extraction Tool...Not Illustrated /8-Amp (Slo-Blo) Fuse ONLY * For dual coin models, double the quantity. IMPORTANT: Check label on computer chip to verify correct part number for controller Telephone: (508) / 5

8 Phase 5 OPL Microprocessor Control Panel Assembly OPL English Keyboard Label Assembly OPL Stick-On Labels (English Only)...Not Illustrated Language OPL Stick-On Labels...Not Illustrated (Spanish, Italian, and Hebrew) Language OPL Stick-On Labels...Not Illustrated (English, Spanish, and Hebrew) Language OPL Stick-On Labels...Not Illustrated (Italian, Dutch, French, German, and Chinese) Phase 5 Microprocessor Control Panel ONLY Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Non-Reversing Controller ONLY Phase 5 OPL Reversing Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4 Phillips Round Head Machine Screw #10-16 x 1/2 Hex Washer TEK Screw /8-Amp (Slo-Blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number for controller. 6 American Dryer Corporation

9 Phase 5 Coin and OPL Microprocessor Control Box Assembly VAC Control Voltage Transformer (refer to Transformer Usage Listing for Gas/Steam Dryers on page 40) (refer to Transformer Usage Listing for Electric Dryers on page 41) #10-16 x 1/2 Hex Washer TEK Screw Position Terminal Block #6-32 x 1 Phillips Round Head Screw #6-32 Pal Nut * 1/2-Amp (Slo-Blo) Fuse * #8-18 x 7/16 Self Drilling Screw * Fuse Block/Strip ONLY Pin Microprocessor Connector * Sockets ONLY Steam Valve Relay - 24 VAC (for mechanical steam damper models Only) #10-16 x 1/2 Hex Head Crimptite Screw Motor Capacitor (for mechanical steam damper models Only) Capacitor Bracket (for mechanical steam damper models Only) #10-16 x 1/2 Hex Washer TEK Screw Transformer (for mechanical steam damper models 208 volts and higher) #10-16 x 1/2 Hex Washer TEK Screw * As required Telephone: (508) / 7

10 Control Vault Assembly Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Microprocessor Coin Vault ONLY Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Non-Microprocessor Coin Vault ONLY Cam ONLY for 1/4 Turn Lock /4 Turn Lock with Key and Cam * 1 1/4 Turn Mer-Pel Key ONLY /4 Turn Coin Box Assembly (includes illus. nos. 2 through 5) /4 Turn Coin Box ONLY without Faceplate High Security (Greenwald) Coin Box ONLY with Key /4 Turn Coin Box Faceplate ONLY /4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch * Specify key number when ordering. 8 American Dryer Corporation

11 Dual Timer Tap Touch Controls Minute Timer - 24 VAC Minute Timer - 24 VAC Red Pilot Light - 24 VAC Tap Touch Switch Relay SPST 24v Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel ONLY #6 Star Washer #6-32 Hex Nut #10-24 x 1/2 Phillips Pan Head Machine Screw #8-32 x 1/4 Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer Telephone: (508) / 9

12 Non-Microprocessor Coin Meter Control Panel Assembly Red Indicator Light - 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Less Coin Meter (includes illus. nos. 1 through 5 and 7 through 9) Coin Meter Control Panel ONLY VAC Relay #10-24 Speed Nut (used on P/N , 24 VAC Relay) Green Push-To-Start Button Coin Meter - 24 VAC (specify timing) #6 Star Washer Hex Nut Position Terminal Block #10-16 x 1/2 Hex Washer TEK Screw Pin Connector Pin Terminal ONLY Pin/Socket Extraction Tool...Not Illustrated NOTE: For Coin Meter Replacement Parts refer to page American Dryer Corporation

13 Non-Microprocessor Control Box Assembly Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool...Not Illustrated Pin Connector Bracket #10-16 x 1/2 Hex Washer TEK Screw #10-16 x 1/2 Hex Washer TEK Screw VAC Control Voltage Transformer (refer to Transformer Usage Listing for Gas/Steam Dryers on page 40) (refer to Transformer Usage Listing for Electric Dryers on page 41) #10-16 x 1/2 Hex Head Crimptite Screw Steam Valve Relay (for mechanical steam damper models Only) - 24 VAC * Fuse Block/Strip ONLY 10** * 1/2-Amp (Slo-Blo) Fuse ONLY * #8-18 x 7/16 Phillips Pan Head TEK Screw #6-32 x 1 Phillips Round Head Machine Screw Position Terminal Block #6-32 Pal Nut Transformer (for mechanical steam damper 208 VAC and higher) #10-16 x 1/2 Hex Washer TEK Screw Motor Capacitor (for mechanical steam damper models Only) Capacitor Bracket (for mechanical steam damper models Only) #10-16 x 1/2 Hex Washer TEK Screw * As required. ** Check fuse on dryer for verification Telephone: (508) / 11

14 Slide Meter Case Assembly 1* Key ONLY for Slide Meter Lock Lock/Key/Cam and Hardware Slide Meter Accumulator - 24 VAC Mate-N-Lok Pin ONLY Pin Mini-Universal Connector /4-20 Free Spin Wash Nut Pin Connector (Mate-N-Lok) Push-To- Start Relay - 24 VAC White Slide Meter Case Coral Blue Slide Meter Case Ivory Slide Meter Case Pin Connector (Mate-N-Lok) Socket Terminal ONLY Slide Meter Case ONLY with Door Less Lock /4 Drive Rivet Slide Meter Extension ONLY with Mirror (includes illus. nos. 14 and 15) Stainless Steel Mirror ONLY Typical Slide Meter Coin Chute (not available from ADC) Red Indicator Light - 24 VAC Rocker Heat Selector Switch Typical Slide Meter Coin Box (not available from ADC) Slide Meter Case Mounting Plate Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch Slide Meter Extension White Slide Meter Timer Door Coral Blue Slide Meter Timer Door Ivory Slide Meter Timer Door * Specify key number when ordering. 12 American Dryer Corporation

15 Main Door Assembly Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Black Glass Adhesive (10.3 oz. cartridge)...not Illustrated Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) /4-20 x 3/4 Black Cap Head Setscrew /4 Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5 through 7) /4-20 x 3/4 Black Cap Head Setscrew /4-20 x 5/8 Black Carriage Bolt /4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw /4-20 x 5/8 Black Carriage Bolt /4-20 Free Spin Wash Nut Black Main Door Handle ONLY /16 Door Glass Black Glass Adhesive (10.3 oz. cartridge)...not Illustrated Telephone: (508) / 13

16 Main Door Switch Assembly #6-32 x 7/8 Phillips Pan Head #6-32 Hex Nut #6 Star Washer Single-Pole Door Switch (SDS) Flag Terminal Main Door Switch Housing #8-18 x 7/16 Phillips Pan Head TEK Screw 14 American Dryer Corporation

17 Front Panel Assembly White Front Panel Assembly (includes illus. nos. 1 through 3) Stainless Steel Front Panel Assembly (includes illus. nos. 1 through 3) Ivory Front Panel Assembly (includes illus. nos. 1 through 3) Coral Blue Front Panel Assembly (includes illus. nos. 1 through 3) /32 x 1/4 Rivet Friction Door Latch Kit (includes illus. nos. 2 and 3) #10-16 x 1/2 Hex Washer TEK Screw #10-16 x 1/2 Phillips Hex Head TEK Crimptite Screw Black Top Hinge Block Assembly Stainless Steel Top Hinge Block Assembly /4-20 x 7/8 Black Cap Head Setscrew /4-20 x 7/8 Stainless Steel Cap Head Setscrew Black Bottom Hinge Block Assembly Stainless Steel Bottom Hinge Assembly Telephone: (508) / 15

18 Basket (Tumbler)/Support Assembly 1* Galvanized Basket (tumbler) ONLY (without felt collar) Stainless Steel Basket (tumbler) ONLY (without felt collar) Galvanized Basket (tumbler) and Support Assembly (includes illus. nos. 1 through 10) Stainless Steel Basket (tumbler) and Support Assembly (includes illus. nos. 1 through 10) #10-16 x 1/2 TORX Plus BTN Type Galvanized Basket (tumbler) Rib ONLY Stainless Steel Basket (tumbler) Rib ONLY /16-18 x 17-1/2 Tie Rod /16 Flat Washer Basket (tumbler) Support ONLY /16-18 Hex Nut /16 Lock Washer /16 Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar (5.0 oz. tube)...not Illustrated * Felt collar is not included and must be ordered separately. 16 American Dryer Corporation

19 OPL Drop Lint Door Assembly Knob Latch Kit Assembly (includes illus. nos. 1 and 2) Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY (for dummy lock) Lock Cam for Dummy Lock Knob Latch Adjustable Cam ONLY #12-24 x 3/8 Round Head Machine Screw ONLY (screw for knob latch adjustable cam) Drop Lint Door Spring White Drop Lint Door Assembly without Trim (includes illus. nos. 4 and 5) Ivory Drop Lint Door Assembly without Trim (includes illus. nos. 4 and 5) Coral Blue Drop Lint Door Assembly without Trim (includes illus. nos. 4 and 5) Stainless Steel Lint Door Assembly without Trim (includes illus. nos. 4 and 5) Neoprene Sponge Tape (sold by the foot) #6 x 1/2 Tamperproof TEK Screw Tamperproof Screw Hand Driver...Not Illustrated Chain for Drop Lint Door (10-1/2 length) Telephone: (508) / 17

20 Coin Drop Lint Door Assembly Lock Assembly with Key Key ONLY Cam ONLY Chain for Drop Lint Door White Drop Lint Door Assembly with Black Trim (includes illus. nos. 4 through 8) Ivory Drop Lint Door Assembly with Black Trim (includes illus. nos. 4 through 8) Coral Blue Drop Lint Door Assembly with Black Trim (includes illus. nos. 4 through 8) Stainless Steel Drop Lint Door Assembly with Black Trim (includes illus. nos. 4 through 8) /4-20 with 3/4 Free Spin Wash Nut Noise Suppression Tape (sold by the foot) /8 x 9/16 Sponge Tape (sold by the foot) Black Drop Lint Door Trim #6 x 1/2 Tamperproof TEK Screw Tamperproof Screw Hand Driver...Not Illustrated 18 American Dryer Corporation

21 Lint Trap Assembly * 1 Choked Lint Trap Assembly Complete (includes illus. nos. 1 and 3 through 5) * 1 Choked Lint Trap ONLY ** 1 Lint Trap Assembly Complete (includes illus. nos. 1 and 3 through 5) ** 1 Lint Trap ONLY /32 Pop Rivet #10-16 x 1/2 Hex Washer TEK Screw Lint Screen Holder ONLY Lint Screen ONLY #6 x 1/2 Tamperproof TEK Screw Tamperproof Screw Hand Driver...Not Illustrated Chain for Drop Lint Door * For gas models ONLY. ** For electric models and steam models ONLY Telephone: (508) / 19

22 Basket (Tumbler) Bearing Assembly /16 Lock Washer /4 Flange Bearing ONLY /16 Lock Washer /16-18 Hex Nut /16-18 x 3/4 Hex Head Machine Bolt /16 Lock Washer /8 Flat Washer Bearing Box Assembly Complete (includes illus. nos. 8 through 14) Bearing Box ONLY /16-18 x 1-1/2 Allen Setscrew /16-18 Hex Nut /16-18 x 3/4 Hex Head Machine Bolt Flange Bearing ONLY /16 Lock Washer /16-18 Hex Nut Pulley ONLY /16-18 x 1 Setscrew /4 x 1/4 x 7/8 Key L-680 V-Belt (basket [tumbler] to idler) 20 American Dryer Corporation

23 Idler Bearing Assembly L-680 V-Belt (idler to basket [tumbler]) x 2-1/2 Compound Pulley L-500 V-Belt (idler to motor) /16-18 x 1 Allen Setscrew /16 x 3/16 x 1-3/8 Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) /8-16 x 1 Hex Head Machine Bolt /8 Lock Washer /8 Flat Washer Idler Square Washer /16-18 Hex Nut /16-18 x 3 Hex Head Machine Bolt Telephone: (508) / 21

24 Non-Reversing Motor Mount Assembly L-500 V-Belt (motor to idler) /16 x 3/16 x 1 Key (for use on 3ø models Only) /2 x 2 Motor Pulley (for use on 1ø - 60 Hz motors Only) /8 x 2 Motor Pulley (for use on 3ø - 60 Hz motors Only) /8 x 2-1/4 Motor Pulley (for use on and Hz motors Only) /2 x 2-1/4 Motor Pulley (for use on Hz motors Only) /16-18 x 3/4 Hex Head Machine Bolt /16 Lock Washer /16 Flat Washer /2 HP v 1ø 50/60 Hz Plug-Type Motor /2 HP 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Plug-Type Motor (for 50 Hz models mfd. prior to August 22, 2002) 22 American Dryer Corporation

25 Non-Reversing Motor Mount Assembly (continued) Socket Terminal ONLY Pin/Socket Extraction Tool...Not Illustrated Pin Housing Connection /16-18 Hex Nut /16 Lock Washer /16 Flat Washer /8 x 3/8 Sponge Tape (sold by the foot) /16-18 Tinnerman Nut /2 HP Motor Mount ONLY (56Z frame) * 1 1/2 HP v 1ø 50/60 Hz Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) /2 HP 240v 1ø 50 Hz Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) * 1 1/2 HP 208/230/380/460v 3ø 60 Hz Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) * 1 1/2 HP 208/230/380/460v 3ø 50 Hz Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) /2 Flat Washer /2 Impellor with 1/2 Bore /8 x 1/8 x 1-1/2 Key /2 Flat Washer /2-20 Left Hand Jam Nut /8 90 Connector * 1 1/2 HP 208/230/380/460v 3ø 50/60 Hz Motor (56Z frame) * Specify voltage when ordering Telephone: (508) / 23

26 Sensor Bracket Assemblies 24 American Dryer Corporation

27 Sensor Bracket Assemblies /4 Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) Automatic Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY Pin Socket Connector ONLY /4 Push On Fastener #6-32 x 1/4 Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16 Phillips Pan Head TEK Screw #6-32 x 1/4 Round Head Machine Screw Thermostat Thermostat Automatic Reset Thermostat Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper ONLY Insulated Terminal ONLY Socket Terminal ONLY Pin Socket Connector ONLY Sensor Bracket Harness Assembly (includes illus. nos. 22 through 24) Noncomputer Sensor Bracket Assembly Complete (includes thermostats) (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool...Not Illustrated #8-18 x 7/16 Phillips Pan Head TEK Screw Telephone: (508) / 25

28 Direct Spark Ignition (DSI) Burner Assembly 26 American Dryer Corporation

29 Direct Spark Ignition (DSI) Burner Assembly Small Burner Tube #8-32 x 1/2 Pan Head Machine Screw #8-32 Pal Nut #41 Natural Gas Burner Orifice #54 Liquid Propane (L.P.) Burner Orifice /2 2-Port Manifold #10-16 x 1/2 Hex Head TEK Crimptite Screw Gas Valve Bracket /2 24 VAC Redundant Gas Valve (natural gas) /2 24 VAC Liquid Propane (L.P.) Gas Valve /2 x 1-1/2 B.I. Nipple /2 x 90 Elbow /2 x 8 B.I. Nipple /2 Black Union Natural Gas Burner Box Assembly Complete Less Orifice (includes illus. nos.1 through 3 and 5 through 27) Liquid Propane (L.P.) Burner Box Assembly Complete Less Orifice (includes illus. nos.1 through 3 and 5 through 27) Burner Box ONLY Liquid Propane (L.P.) Conversion Kit Ignitor Flame-Probe Assembly with Leads High Voltage (HV) Wire and Connector Assembly #10-16 x 1/2 Hex Washer TEK Screw Pipe Bracket Twin Speed Nut Sail Switch Box Cover and Bracket ONLY Sail Switch #4 x 3/4 Pan Head Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) /8 Push On Fastener Sail Switch Box with Cover Sail Switch Assembly Complete (includes illus. nos. 15 and 17 through 23) Hi-Limit Mounting Bracket #6-32 x 1/2 Phillips Round Head Machine Screw º Manual Reset Hi-Limit #6-32 Pal Nut Telephone: (508) / 27

30 Electric Oven Assembly 28 American Dryer Corporation

31 Electric Oven Assembly Small Electric Oven Box ONLY * 1 Electric Oven Assembly Complete * - Electric Element #10-16 x 1/2 Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2 Hex Head Crimptite Screw Sail Switch Box Cover ONLY Sail Switch ONLY #4 x 3/4 Pan Head A Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) /8 Push On Fastener #10-16 x 1/2 Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #10-24 x 1/2 Phillips Round Head Machine Screw º Hi-Limit #10-16 x 1/2 Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug /4-20 Free Spin Wash Nut * 1 Oven Relay #10-24 x 1/2 Phillips Pan Machine Screw Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) * - Bus Bar * - Oven Wiring #10 Star Washer (2 per element) Small Electric Oven Right Side Cover ONLY * Refer to Electric Oven Component Application Chart on page Telephone: (508) / 29

32 DSI Control Module Assembly #6-32 Hex Nut ADC Direct Spark Ignition (DSI) Control Module #8-18 x 7/16 Phillips Head TEK Screw Direct Spark Ignition (DSI) Module Mounting Plate 30 American Dryer Corporation

33 Single-Phase (1ø) Motor, Electric Relay Panel Assembly Pole Contactor - 24 VAC #10 x 1 Hex Head TEK Screw RC Network with Connectors (for microprocessor models Only) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16 Phillips Head TEK Screw...Not Illustrated Telephone: (508) / 31

34 3-Phase (3ø) Motor, Electric Relay Panel Assembly Back Electrical Box Component Mounting Plate Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC RC Filter (for microprocessor models Only) #8-32 x 3/4 Phillips Round Head Machine Screw #8-32 Pal Nut /16 Lock Washer /16-18 Hex Nut Position Terminal Block #6-32 x 1-1/4 Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Step-Down Transformer (refer to Transformer Usage Listing for Gas/Steam Dryers on page 40) (refer to Transformer Usage Listing for Electric Dryers on page 41) #10-16 x 1/2 Hex Washer TEK Screw Back Electrical Box Cover...Not Illustrated #8-18 x 7/16 Phillips Round Head TEK Screw...Not Illustrated 32 American Dryer Corporation

35 Slide Meter Control Box Assembly Pole Contactor - 24 VAC #10 x 1 Hex Head Screw #10-16 x 1/2 Hex Head Washer TEK Screw VAC Transformer (refer to Transformer Usage Listing for Gas/Steam Dryers on page 40) (refer to Transformer Usage Listing for Electric Dryers on page 41) * 1/2-Amp (Slo-Blo) Fuse ONLY * #8-18 x 7/16 Phillips Pan Head TEK Screw * Fuse Block/Strip ONLY #6-32 x 1 Round Head Machine Screw Position Terminal Block ONLY #6-32 Pal Nut /16-18 Lock Washer /16-18 Hex Nut Rear Contactor Plate ONLY Back Electrical Box Cover...Not Illustrated #8-18 x 7/16 Phillips Pan Head TEK Screw...Not Illustrated * As required Telephone: (508) / 33

36 Steam Coil/Air-Operated Steam Damper Assembly 34 American Dryer Corporation

37 Steam Coil/Air-Operated Steam Damper Assembly Steam Coil Assembly /16 Lock Washer /16-18 Hex Nut /4-20 Hex Nut /4 Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) /4 Lock Washer /4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2 length) /16-24 Stainless Steel Acorn Nut /16-24 Right Hand Jam Nut /16 Diameter x 3 Stroke Piston Left and Right Piston Support /4-20 Hex Nut /4 Lock Washer /4 Poly x 1/8 M.P.T. Connector /4 Poly-Flo Tubing /4 Poly x 1/8 M.P.T. Connector /8 Needle Valve /8 Brass Close Nipple Way Micro Valve - 24 VAC #6-32 x 1 Machine Bolt #6 Star Washer #6-32 Hex Nut Micro Valve Support /4-20 Hex Nut /4 Lock Washer /8 N.P.T. Silencer (muffler) #N Telephone: (508) / 35

38 Steam Coil/Mechanical Steam Damper Assembly 36 American Dryer Corporation

39 Steam Coil/Mechanical Steam Damper Assembly Steam Coil Assembly ONLY /16 Lock Washer /16-18 Hex Nut /4-20 Hex Nut /4 Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2 - length) Rod Bracket /2 x 3/32 Cotter Pin #10 Flat Washer Mechanical Steam Damper Actuator Rod #8-32 x 1/4 Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount #10 Flat Washer /2 x 3/32 Cotter Pin Mechanical Steam Damper Arm #8-32 x 1/4 Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount Mechanical Steam Damper Motor Mechanical Steam Damper Switch Plate Mechanical Steam Damper Switch #4-40 x 5/8 Phillips Pan Head Machine Screw Mechanical Steam Damper Switch #4-40 x 5/8 Phillips Pan Head Machine Screw #8 Star Washer #8-32 x 3/8 Pan Head Machine Screw * 1 Mechanical Steam Damper Motor Cam * The mechanical steam damper motor cam is part of the mechanical steam damper motor Telephone: (508) / 37

40 Outer Top/Back Guard Assembly Back Electrical Box Cover #8-18 x 7/16 Phillips Pan Head TEK Screw 3* Top Back Guard #8-18 x 7/16 Phillips Pan Head TEK Screw #8-18 x 7/16 Phillips Pan Head TEK Screw 6* Outer Top Plain Bottom Back Guard #8-18 x 7/16 Phillips Pan Head TEK Screw Leveling Leg * There is no top back guard or outer top on steam models. 38 American Dryer Corporation

41 Coin Meter Replacement Parts /60 RPM 24 VAC/60 Hz Meter Motor /30 RPM 24 VAC/50 Hz Meter Motor Point Cam Point Cam Point Cam Point Cam Point Cam Point Cam Point Cam Point Cam Point Cam Meter Switch B with Arm Meter Switch A or C Telephone: (508) / 39

42 Transformer Usage Listing for Gas/Steam Dryers HEAT GAS/STEAM VOLTAGE WIRE SERVICE STEP DOWN TRANSFORMER PART. NO. CONTROL VOLTAGE PART NO or / / American Dryer Corporation

43 Transformer Usage Listing for Electric Dryers KW VOLTAGE PHASE WIRE SERVICE STEP DOWN TRANSFORMER PART NO. CONTROL VOLTAGE PART NO ø ø ø ø /480 3ø ø 3 or ø ø ø ø ø ø ø ø Telephone: (508) / 41

44 Electric Oven Component Application Chart KW VOLTAGE PHASE WIRE SERVICE OVEN ASSEMBLY ELEMENT OVEN WIRE TERMINAL LUG BUS BAR P/N: OVEN RELAY QTY KW PART NO. QTY SIZE PART NO. QTY PART NO CAT. NO. PART NO /480 3ø 3 or # DPA ø # DPA ø # DPA ø 3 or # DPA ø # DPA ø # DPA ø # DPA ø # DPA ø # DPA ø 3 or # DPA ø # DPA American Dryer Corporation

45 Additional Parts Available Part No. Description Lint Screen Label Phase 5 Coin Program Location Summary Label Phase 5 OPL Program Location Summary Label Caution-Exhausted/Lint Screen Label Warning-Fire Hazards Label V Electric Service Label /8 Straight (BX) Connector /8 x 90 (BX) Connector /8 x 45 (BX) Connector /8 Red Jacket (BX) Insulator /8 Jiffy Clip (BX retainer clip) /8 Flexible Steel Electrical Conduit Terminal Strip (2-position) Terminal Strip (3-position) /4 In-Line Connector #74B Wire Nut Crimp-On Wire Nut /2 Harness Tie Harness Tie Harness Tie Mounting Clip Manometer (hydro gauge) for Measuring Gas Pressure White Brush-In-Cap Bottle Touch-Up Paint Coral Blue Brush-In-Cap Bottle Touch-Up Paint Ivory Brush-In-Cap Bottle Touch-Up Paint Telephone: (508) / 43

46 ADC /24/05-0