Create the right atmosphere with renewables

Transcription

1 The complete ROTEX heat pump product range Create the right atmosphere with renewables ROTEX air-to-water and ground source heat pumps for new build and modernisation.

2 The inexhaustible heat source on your doorstep ROTEX offers individual heat pump solutions for every requirement, supplying your home with heat with maximum efficiency. Air-to-water heat pump, ROTEX HPSU compact The complete solution Air-to-water heat pump, ROTEX HPSU Bi-Bloc Flexible application Air-to-water heat pump, ROTEX HPSU monobloc The compact all-in-one outdoor unit Ground source heat pump, ROTEX HPU ground Natural geothermal heat Gas hybrid heat pump, ROTEX HPU hybrid Smart modernisation with heat pump and gas Air-to-water heat pump, ROTEX HPSUhitemp High temperature heat pump for modernisation Solutions for new build & modernisation 4 5 Energy labelling 8 9 Product matrix 6 7 Specification

3 The renewable heating era starts here We wanted a convenient and environmentally friendly heating system for our house. So our heating contractor recommended a heat pump from ROTEX. They have great solutions, no matter what your situation. Now, nothing beats the comforts of home and we get to save on heating costs too! Beatrix and Michael Janick, homeowners Natural heat sources on your doorstep Outdoor air and geothermal heat are natural and inexhaustible energy sources. Take advantage of this free heat supply and use it in your own home. A heat pump pumps heat into the heating system from the ambient air or the ground, with the help of a highly efficient compressor. This principle is equivalent to using a refrigerator or air conditioning system in reverse. Air-to-water heat pumps utilise the ambient air as their heat source. They can therefore be installed quickly and inexpensively. Ground source heat pumps utilise ground temperatures which are constant all year round. Apart from the heat pump itself, geothermal collectors or geothermal probes are required for operating these heat pumps. The most suitable heat source in individual cases depends on the heat demand and the local conditions. ROTEX new build solutions The amount of heating energy required by modern buildings is continually going down, resulting in lower flow temperatures. The low temperature heat pumps from ROTEX are designed specifically to meet such requirements. An underfloor heating system is essential for exploiting the full potential of this energy efficient heat generator. As underfloor heating systems have such a large surface area, they can make do with low surface temperatures. Many ROTEX heat pump systems can also apply the principle in reverse. Consequently, it is possible to use heat pumps in summer for cooling your building gently and economically. ROTEX solutions for modernisation with radiators Older heating systems with radiators depend on higher flow temperatures (at least 55 C and up to 80 C). So that you can also benefit from this technology in modernisation projects, ROTEX provides heat pumps with a second cooling circuit. In this second compressor stage, the temperature is raised to up to 80 C warm enough to continue using your existing radiators efficiently, without additional electric heating. Alternatively, ROTEX also offers a hybrid appliance consisting of an air-towater heat pump and a gas condensing boiler. ROTEX solutions for modernisation providing twice the gain in convenience Even with a modernisation project, there s no need to forego the convenience of an underfloor heating system. ROTEX offers such a wide range, you are bound to find the most suitable solution for your project. Heat source Outdoor air or geothermal heat (brine) Heat pump Compressor Consumer DHW heating system How it works Heat pumps utilise freely available environmental heat for heating systems, such as that in the ambient air or naturally occurring geothermal heat, a principle that has already proven its worth in millions of installations. Heat exchanger (evaporator) Expansion valve Heat exchanger (condenser) 4 5

4 Whatever your needs the ideal solution is here ROTEX HPSU compact Air-to-water heat pump ROTEX HPSU Bi-Bloc Air-to-water heat pump ROTEX HPSU monobloc Air-to-water heat pump ROTEX HPU ground Ground source heat pump ROTEX HPU hybrid Gas hybrid heat pump ROTEX HPSU hitemp Air-to-water heat pump The complete solution: State of the art heat pump technology with integral thermal store. Hygienic and open to additional heat sources. The flexible solution: Innovative technology and flexible integration into the building. The all-in-one solution: The compact all-in-one outdoor unit for flexible application. The highly efficient solution: Ground source heat pumps supply the highest efficiency levels regardless of the outside temperature. The combined solution: Smart modernisation with heat pump and gas. The high temperature solution: The 2-stage heat pump for modernisation projects achieves flow temperatures of up to 80 C. ROTEX heat pump Maximum flow temperature New build Existing building with underfloor heating or low temperature radiators (50 C) Existing building with radiators over 50 C Integral dual mode option, second heat generator can be connected Heating and DHW Combination with solar (retrofitting option) Cooling (Comfort 365) The components Outdoor unit Indoor unit Hygienic thermal store with solar option Stainless steel tank HPSU compact H/C Biv 55 C HPSU compact H/C 55 C HPSU Bi-Bloc 55 C HPSU monobloc 55 C 1) 1) HPU ground 60 C HPU hybrid 80 C 1) 1) HPSU hitemp 80 C 1) Series Not available Optional 1) Optional if HybridCube used Ideal combination Possible combination 6 7

5 Efficiency made transparent Strong system solution: Heat pump and solar Energy efficiency labels for heating systems We re familiar with these labels on fridges, televisions and other electrical appliances. From September 2015, heat generators and water heaters will bear their own EU energy efficiency labels. These labels will make it easier to compare individual heating products and decide which ones to buy. How the energy efficiency classes are determined The product s seasonal energy efficiency will determine its energy efficiency class. Put simply, this indicates the relationship between the total energy input and the useful heat output. The greater the proportion of renewable energy used to generate heat, the higher the efficiency class. As a result, heat pumps are usually in the top efficiency classes (A+ and above), followed by gas and oil condensing boilers, with conventional boilers bringing up the rear, as they tend to perform comparatively poorly against the relevant criteria. Efficiency classes for products and systems Individual heat generators will each bear a product label. The efficiency of a heating system depends not only on the heat generator, but on several components. That is why the combination or package label was introduced. This covers the heat generator plus other components such as the controller, cylinders, solar thermal systems and/or an additional heat generator. The combination label is calculated from the efficiency values of the individual appliances and devices. Expert advice Every building is different. Your choice of a new heating system, especially as part of modernisation, should not be based solely on the efficiency rating. Depending on the characteristics of your building, a heating system with a low efficiency rating may consume less energy than a system with a higher rating. Consequently it s important to get expert advice and help with sizing: that s where your ROTEX partner comes in useful. Excellent package label ratings Hooking up a solar thermal system is the most effective way to reach a higher overall system efficiency class. The ROTEX HPSU compact is already optimised for linking up with a solar thermal system when you connect it to a ROTEX Solaris, will become your own personal solar heater. The integral central heating backup and large storage volume will raise your system s energy efficiency ratings for both domestic hot water and space heating. XL A ++ A +++ * ROTEX system consisting of: HPSU compact 508 H/C Biv 6 kw, RoCon control, 4 solar collectors V26P 2 ROTEX HPSU_compact_H/C_Biv_6kW 508 H/C / RRLQ006CAV3 Biv 6 kw / RRLQ006CAV XL 3 A ++ A + A B C D E F G 39 db 62 db A ++ A B C D E F G A 04 kw 06 kw 05 kw Product label HPSU compact 508 H/C Biv 6 kw Safe in the knowledge it s ROTEX All ROTEX products are tested and meet the criteria in the Ecodesign Directive. For both individual products and packaged solutions, energy labels are a reliable indicator of efficiency class. Perfectly matched in terms of their individual components, our complete systems provide both maximum convenience and the highest safety standards. 4 1 System diagram: HPSU compact with solar thermal 1 Heat pump internal unit with integral thermal store and built-in electronic controller 2 Heat pump external unit 3 Solar thermal collectors 4 Solar pump station /

6 ROTEX HPSU compact indoor unit ROTEX HPSU compact The all-rounder for greater convenience The complete solution with compact dimensions and pioneering technology heating and cooling with the highest levels of efficiency. ROTEX HPSU compact outdoor unit SG Ready Smart Heat Pumps Smart Heat Pumps Ready SG ROTEX HPSU compact high class efficiency The ROTEX HPSU compact combines highly efficient heat pump technology with an innovative thermal store in the smallest of spaces. The entire heating centre only takes up 0.36 m 2 (HPSU compact 304/308) or 0.62 m 2 (HPSU compact 508/516). Electronic management of both heat pump and thermal store (ISM = Intelligent Store Management) maximises energy efficiency at the same time as heating and domestic hot water (DHW) convenience. The HPSU compact is Smart Grid Ready, which means that it has already reduced its energy costs to meet anticipated future requirements. DHW heating employs the instantaneous water heating principle and is characterised by the highest standards of hygiene. Perfect climate: Heating in winter cooling in summer The HPSU compact is not only designed for heating, but also for cooling when combined with an underfloor heating system. Your customised climate 365 days a year. Low expenditure high yield Solar energy and heat pump complement each other ideally here. At peak levels, 80 % of the solar energy that has been captured can be converted into usable heat. In conjunction with a ROTEX solar thermal system, the ROTEX HPSU compact becomes an unbeatable solar heater. Your benefits with the ROTEX HPSU compact air-to-water heat pump Outstanding efficiency Use of free, renewable, environmental energy from the sun and air Innovative technology Intelligent Store Management (ISM) for maximum energy efficiency and highest levels of heating and DHW convenience Intuitively operated electronic control unit Smart Grid Ready Quiet outdoor unit thanks to silent mode DHW hygiene Highest levels of hygiene thanks to separation of tank water and DHW No deposits, no legionella Meets your needs Heating, cooling and domestic hot water Economical and quiet to run Compact dimensions, straightforward installation in the smallest of spaces Flexible application, direct combination with solar thermal system or existing heating systems possible The RoCon hybrid control unit Apart from heat pump control functions, the hybrid control unit also takes on complete management of the thermal store the heart of the hybrid heating system. This comprehensive hybrid management system ensures the highest levels of system efficiency and convenience for central heating, domestic hot water and cooling. Straightforward and consistent regulation of the ROTEX HPSU compact, with intuitive menu navigation and control via smartphone with the ROTEX app. The hybrid heating centre open to all energy types The HPSU compact internal unit can furthermore be used as an efficient thermal store for additional heat sources. Apart from a solar thermal system, it can also be backed up for example by oil, gas and pellet boilers or wood burning stoves with back boilers. If you do not intend to install a solar thermal system immediately, one can be retrofitted quickly and easily at any time

7 HPSU Bi-Bloc indoor unit ROTEX HPSU Bi-Bloc Heat intelligently and save money The heat pump split system, comprising external unit, internal unit and thermal store. HPSU Bi-Bloc outdoor unit ROTEX HPSU Bi-Bloc free solar energy for your heating system The sun provides us with a source of natural energy. The ROTEX HPSU Bi-Bloc utilises environmental heat with maximum efficiency. It consists of an external unit, an internal unit and a thermal store. You do not need a separate installation room for the HPSU Bi-Bloc. Economical and quiet The heat demand of a building varies widely depending on weather conditions and utilisation patterns. All ROTEX heat pumps employ inverter technology, which operates the compressor variably between 50 and 100 % power. In other words, the output of the heat pump is continuously adjusted to meet the demand. This increases the energy efficiency of ROTEX heat pumps significantly and leads to outstandingly quiet operation. Perfect climate: Heating in winter cooling in summer The HPSU Bi-Bloc is not only designed for heating, but also for cooling when combined with an underfloor heating system. Your customised climate 365 days a year. Your benefits with the ROTEX HPSU Bi-Bloc air-to-water heat pump Outstanding efficiency Use of free, renewable, environmental energy from the sun and air Innovative technology Maximum energy efficiency and highest levels of heating and DHW convenience Intuitively operated electronic control unit DHW hygiene Highest levels of hygiene thanks to separation of tank water and DHW No deposits, no legionella Meets your needs Economical and quiet to run Compact dimensions, straightforward installation in the smallest of spaces Flexible application, direct combination with solar thermal system possible The outdoor unit The external unit extracts heat from the ambient air, which is absorbed by the heat transfer medium (refrigerant) and transferred to the internal unit. The compact external unit can be sited inconspicuously outside the new build or existing residential building. The first thing we need for foodstuffs is clean water The hygienic ROTEX thermal store principle: The ROTEX HybridCube thermal store is a combination of domestic hot water tank and instantaneous water heater. The domestic water to be heated is conveyed and heated through a separate high-performance heat exchanger made of stainless steel. Water that is charged first is also the first to be removed (first-in first-out principle)

8 HybridCube thermal store ROTEX HPSU monobloc Compact and easy installation The compact all-in-one external unit for flexible application. HPSU monobloc outdoor unit All-in-one The ROTEX HPSU monobloc air-to-water heat pump for outdoor installation combines all components in a single compact unit. This unobtrusive appliance can be sited outside the building. When combined with a hygienic ROTEX thermal store, it ensures optimum heating and hot water convenience Easy installation The compact unit is also supplied with a fully sealed unvented cooling circuit, so that the heating pipes run directly from the heat pump into the building. Because connections are only necessary on the water side, installation of the heat pump is exceptionally straightforward and rapid. Only the hot water storage tank and the spare immersion heater (if applicable) need to be integrated into the building. Optimum water hygiene maximum convenience For domestic hot water heating, you can choose between the hygienic instantaneous water heater principle or combination with a convenient ROTEX thermal store. Perfect climate: Heating in winter cooling in summer The HPSU Bi-Bloc is not only designed for heating, but also for cooling when combined with an underfloor heating system. Your customised climate 365 days a year. Your benefits with the ROTEX HPSU monobloc air-to-water heat pump and ROTEX HybridCube thermal store Outstanding efficiency Use of free, renewable, environmental energy from the sun and air Innovative Technology Inverter technology ensures efficient operation Intuitively operated electronic control unit Domestic water hygiene Highest level of hygiene by separation of store and potable water No deposits, no legionella production Meets you needs Easy and economical installation Heating, cooling and domestic hot water Flexible application, direct combination with solar thermal system possible The thermostat easy to set The controller is extremely user friendly. Operating modes, time programs and parameters can be set easily and intuitively via the plain text display screen. The controller can also be used as a thermostat. The room temperature can be raised or lowered quickly and easily with just a few clicks the intelligent system automatically adjusts the water temperature accordingly.. The first thing we need for foodstuffs is clean water The hygienic ROTEX thermal store principle: The ROTEX HybridCube thermal store is a combination of domestic hot water tank and instantaneous water heater. The domestic water to be heated is conveyed and heated through a separate high-performance heat exchanger made of stainless steel. Water that is charged first is also the first to be removed (first-in first-out principle)

9 HPU ground indoor unit ROTEX HPU ground Heating with geothermal energy Thanks to inverter heat pump technology, the ground source heat pump utilises free geothermal heat in a particularly environmentally responsible and uniquely efficient way. Innovative technology and maximum efficiency Even in the coldest places there is plenty of energy in the ground in the form of free geothermal heat. At a depth of 15 metres and below, the temperature is a fairly constant 10 C. This trapped energy represents an inexhaustible heat source which the ground source heat pump can tap into to heat your home. The ROTEX HPU ground utilises this environmental heat supply to heat your home with maximum efficiency. Inverter technology for greater efficiency The ROTEX ground source heat pump delivers exceptional performance thanks to its highly efficient inverter technology. When the building does not require heating at full capacity, the heat pump reduces its output, making it much more efficient. One output many applications Thanks to inverter technology the HPU ground offers an output that ranges from 3 kw -10 kw. With the boost function this can be increased to 13 kw, extending still further the number of applications that can benefit from this heat pump. In low energy houses, the heat source can have smaller dimensions. This saves money when probe drilling or selecting a geothermal collector. Your benefits with the ROTEX ground source heat pump HPU ground Outstanding efficiency Use of free, renewable geothermal heat Inverter technology ensures efficient operation at any outside temperature User friendly control with integrated energy management Innovative technology Maximum energy efficiency and highest levels of heating and DHW convenience Intuitively operated electronic control unit Meets your needs For central heating and domestic hot water Economical and quiet to run Compact dimensions, straightforward installation in the smallest of spaces Attractive design with a very small footprint Thanks to its compact design, the system needs a very small installation area of only 0.44 m2 roughly the same as a washing machine. At a height of just 1.73 m, the combined heat pump module and domestic hot water tank fits in any standard room. How it works Using geothermal probes or geothermal collectors, heat is extracted from below the surface of the ground. A mixture of water and antifreeze, also known as brine, is pumped around the circuit for this purpose. Thereafter, the brine flows through the heat pump, where the heat from the ground is transferred to a refrigerant with a low evaporating point. The refrigerant is subsequently compressed and heated in the compressor. It then transfers its heat to the heating system where it is used for heating and domestic hot water production

10 HPU hybrid indoor unit ROTEX HPU hybrid Modernisation with heat pump and gas Utilise the benefits of both energy types maximum energy exploitation on a small footprint. HPU hybrid outdoor unit Efficient, convenient and reliable The new ROTEX HPU hybrid unites a renewable air-to-water heat pump with energy saving gas condensing technology. The internal unit, consisting of the gas condensing boiler and the internal part of the heat pump, typically takes up no more space than a conventional gas boiler. With flow temperatures of 25 C to 80 C, the ROTEX HPU hybrid is suitable for any kind of building. Outstanding efficiency at all times and all temperatures The ROTEX gas hybrid heat pump achieves optimum energy efficiency thanks to its dual mode parallel and alternative operation. The heat pump is activated for as long as possible or both appliances run concurrently. The gas boiler is only used when it is really needed, i.e. when high temperatures are required. The ROTEX gas hybrid heat pump therefore ensures maximum efficiency at all times in any operating mode. Optimum water hygiene maximum convenience For domestic hot water heating, you can choose between the hygienic instantaneous water heater principle or combination with a convenient ROTEX thermal store. Perfect climate: Heating in winter cooling in summer The HPU hybrid is not only designed for heating, but also optionally for cooling when combined with an underfloor heating system. Your customised climate 365 days a year. Your benefits with the ROTEX HPU hybrid gas hybrid heat pump Outstanding efficiency Optimum use of free, renewable, environmentally responsible energy from the sun and air in combination with a gas condensing system Up to 30 % more efficient DHW heating than with standard gas condensing boilers Innovative technology The most efficient mode for every outside temperature. The ROTEX hybrid logic controller always selects the most favourable operating mode based on current electricity and gas prices All components are perfectly matched to each other prior to delivery Meets your needs High output and high temperatures guarantee heat at any time Easy integration into existing heating systems Economical and quiet to run Compact dimensions, straightforward installation in the smallest of spaces optional cooling All at the touch of a button Current electricity and gas prices are easily entered into the controller of the ROTEX gas hybrid heat pump. This device then automatically selects the most favourable heat generator in every operating mode. This allows you to maintain control over your heating bills. Alternatively, you can choose an operating mode with ecological bias. The controller will then always select the energy source with the least environmental impact (highest primary energy efficiency). Heat consumption (kwh/ C) Gas operation Hybrid operation Heat pump operation -14 C 0 C 15 C Heat intelligently and reliably all year round The ROTEX HPU hybrid heat pump optimises parallel operation with the heat pump. This results in the gas boiler starting to cover the heat demand of the building on its own much later than would otherwise be the case. This system is up to 35 % more efficient than a gas condensing boiler on its own. This means that, over the course of a year, 60 to 70 % of the energy for central heating is supplied by the heat pump. up to 35 % more efficient 18 19

11 ROTEX HPSU hitemp The heat pump for modernisation projects HPSU hitemp outdoor unit Thanks to a second cooling circuit, high temperature heat pumps are ideal for modernising existing buildings with radiators. HPSU hitemp Indoor unit Out with the old boiler, in with a ROTEX heat pump. Just like the HPU hybrid, the ROTEX HPSU hitemp sets new standards in the modernisation. Even at very cold outside temperatures of -20 C, it generates a heating water temperature of up to 80 C without the need for additional electric heating, thereby reducing energy costs. Another benefit: Your existing radiators can be integrated simply into the new heating system. Minimum expenditure, maximum yield The HPSU hitemp consists of an external unit, an internal unit and a thermal store. You do not need a separate installation room for the HPSU hitemp. The compact external unit allows you greater flexibility in your choice of installation location. Economical and quiet thanks to output modulating operation Thanks to inverter technology, the output of the heat pump is continuously adjusted to meet the demand. And this modern inverter technology is employed twice in the 2-stage HPSU hitemp heat pump. This increases energy efficiency substantially. Your benefits with the ROTEX HPSU hitemp air-to-water heat pump Outstanding efficiency Optimum utilisation of free, renewable, environmental energy from the sun and air Innovative technology Up to 80 C flow temperature Integration of existing radiators DHW hygiene Highest levels of hygiene thanks to separation of tank water and DHW No deposits, no legionella Meets your needs Ideal for modernisation projects Heating and DHW Economical and quiet to run Compact dimensions, straightforward installation in the smallest of spaces Flexible application, direct combination with solar thermal system (in combination with ROTEX HybridCube) There were times when I wondered what on earth we were doing. The building itself, the heating system, water, electrics everything seemed to need replacing. Yet when it came to heating, the ROTEX system had a pleasant surprise in store. We could carry on using the old radiators and everything was quickly and cleanly installed in less space. Simply brilliant! On the sunny side today and tomorrow The HPSU hitemp is ideally suited for utilising solar energy in combination with the ROTEX HybridCube thermal store. Regardless of whether you install a solar thermal system immediately or have one retrofitted in years to come, ROTEX storage technology guarantees unbeatable drinking water hygiene with maximum DHW convenience at all times. Jens Hahn talking about his home 20 21

12 Specification System efficiency with Solar*: * ROTEX system consisting of: HPSU compact 508 H/C Biv 6 kw, RoCon control, 4 solar collectors V26P XL A ++ A +++ HPSU outdoor unit RRLQ 004CAV3 006CAV3 008CAV3 011CAW1 014CAW1 16CAW1 Corresponding HPSU compact indoor unit / / Energy Space Flow temperature A++ A++ A++ A++ A++ A++ efficiency class heating 55 C (wit- hout control) Flow temperature 55 C with integrated control A++ A++ A++ A++ A++ A++ Water heating energy A (L) A (L) / A (XL) A (L) / A (XL) A (XL) A (XL) A (XL efficiency (tapping profile) Heating capacity Nom. kw 3.47 (2) 4.53 (3) 4.60 (2) 6.22 (3) 5.51 (2) 7.78 (3) 7.70 (2) (3) 9.60 (2) (3) (2) (3) Max. kw 4.80 (2) 5.10 (3) 6.40 (2) 8.40 (3) 7.70 (2) (3) 9.10 (2) ( (2) (3) (2) (3) Cooling capacity Max. kw 5.90 (3) 4.50 (4) 7.30 (3) 5.50 (4) 8.40 (3) 6.40 (4) (3) (4) (3) (4) (3) (4) COP 5.23 (3) 4.88 (3) 4.60 (3) 4.47 (3) 4.27 (3) 4.10 (3) EER 4.21 (3) 3.99 (3) 3.64 (3) 3.32 (3) 2.96 (3) 2.72 (3) Dimensions Unit Height mm Depth mm Width mm Weight Unit kg Operation range Heating Min. CWB -25 (7) -25 (7) -25(7) -25 (7) -25 (7) -25 (7) Max. CWB Cooling Min. CDB Max. CDB Hot water Min. CDB -25 (8) -25 (8) -25 (8) -20 (8) -20 (8) -20 (8) Max. CDB 35 (8) 35 (8) 35 (8) 35 (8) 35 (8) 35 (8) Sound power Heating Nom. dba level Cooling Nom. dba Sound pressure level Heating Nom. dba 48 (9) 48 (9) 49 (9) 51 (9) 51 (9) 52 (9) Cooling Nom. dba 48 (9) 49 (9) 50 (9) 50 (9) 52 (9) 54 (9) Refrigerant Type R-410A (10) R-410A (10) R-410A (10) R-410A (10) R-410A (10) R-410A (10) GWP 2, , , , , ,087.5 Charge kg TCO2eq Compressor Starting method Inverter controlled Notes (2) Heating A2 / W35 (3) Cooling A35 / W18; Heating A7 / W35 (4) Cooling A35 / W18; Heating A10 / W35 (7) Operation range heating (outdoor unit): range increase by support back-up heater (8) Operation range hot water (outdoor unit): range increase by support booster heater (9) at 1m distance, free field (10) Contains fluorinated greenhouse gases 1) The Smart Grid Ready label for all ROTEX HPSU compact heat pumps certifies their suitability for power bias operation - see page 9 2) All ROTEX heat pumps with the visual Comfort 365 are not only designed for heating, but also for cooling when combined with an underfloor heating system. Your customised climate 365 days a year. 3) The ROTEX compact class product range has won the Plus X Award in recognition of its degree of innovation, high quality, and excellence in design, functionality and ecology. 4) ROTEX HPSU compact heat pumps meet the strict quality criteria of the EHPA. 1) 2) 3) 4) SG Ready Smart Heat Pumps HPSU compact Indoor unit 304 H/C / 304 H/C Biv 308 H/C / 308 H/C Biv 508 H/C / 508 H/C Biv 516 H/C / 516 H/C Biv Dimensions Unit Height mm Width mm Depth mm Weight Unit H/C / H/C Biv kg 84 / / / / 118 Tank Water volum l Maximum water temperature C Operation range Heating Water side Min. C 15 (11) 15 (11) 15 (11) 15 (11) Max. C Cooling Water side Min. C Max. C Notes (11) 15 C bis 25 C: BUH only, no heat pump operation = during commissioning. SG Ready Smart Heat Pumps The Smart Grid Ready label for all ROTEX HPSU compact heat pumps certifies their suitability for power bias operation. In order not to overload power grids, wind turbines are frequently shut down when more electricity than required is being generated. Storage is required to absorb these peaks in production. Heating systems with heat pumps can provide such storage. As and when required, they can convert excess electricity into thermal energy, which is then stored in a buffer or domestic hot water tank. Grid operators can already shut down heat pump systems temporarily in the event of power shortages. In order to utilise their potential to the full, heat pumps require correspondingly smart control technology. Consumers can tell that a heat pump is suitably equipped by the Smart Grid Ready label. Accessories can be found in the current ROTEX pricelist. Please check with your heating contractor. Information in printed materials subject to correction and technical modification. Energy efficiency labels and current product datasheets can be obtained using the Energy Label Generator at

13 HPSU Bi-Bloc outdoor unit RRLQ 004CAV3 006CAV3 008CAV3 011CAW1 014CAW1 016CAW1 Corresponding indoor unit HPSU Bi-Bloc RHBH (Heating) / RHBX (Heating/Cooling) 04CB3V 08CB9W 08CB9W 11CB9W 16CB9W 16CB9W Energy Space heating Flow temperature A++ A++ A++ A++ A++ A++ efficiency class 35 C (without control) Flow temperature A++ A+ A++ A+ A+ A+ 55 C (without control) Flow temperature 55 C with integrated control A++ A++ A++ A++ A+ A++ Heating capacity Nom. kw 3.27 (2) 4.40 (3) 4.58 (2) 6.00 (3) 5.80 (2) 7.40 (3) 8.56 (2) (3) (2) (3) (2) (3) Max. kw 4.80 (2) 5.10 (3) 6.40 (2) 8.40 (3) 7.70 (2) (3) 9.10 (2) (3) (2) (3) (2) (3) Cooling capacity Max. kw 5.90 (3) 4.50 (4) 7.30 (3) 5.50 (4) 8.40 (3) 6.40 (4) (3) (4) (3) (4) (3) (4) COP 5.04 (3) 4.74 (3) 4.45 (3) 4.60 (3) 4.30 (3) 4.25 (3) EER 4.55 (3) 3.89 (3) 3.79 (3) 3.32 (3) 3.96 (3) 3.69 (3) Dimensions Unit Height mm Depth mm Width mm Weight Unit kg Operation range Sound power level Sound pressure level Heating Min. CWB -25 (7) -25 (7) -25(7) -25 (7) -25 (7) -25 (7) Max. CWB Cooling Min. CDB Max. CDB Domestic hot water Min. CDB -25 (8) -25 (8) -25 (8) -20 (8) -20 (8) -20 (8) Max. CDB 35 (8) 35 (8) 35 (8) 35 (8) 35 (8) 35 (8) Heating Nom. dba Cooling Nom. dba (version RHBX) Heating Nom. dba 48 (9) 48 (9) 49 (9) 51 (9) 51 (9) 52 (9) Cooling Nom. dba 48 (9) 49 (9) 50 (9) 50 (9) 52 (9) 54 (9) (version RHBX) Refrigerant Type R-410A (10) R-410A (10) R-410A (10) R-410A (10) R-410A (10) R-410A (10) GWP 2, , , , , ,087.5 Charge kg TCO2eq Compressor Starting method Inverter controlled Notes (2) Heating A2 / W35 (3) Cooling A35 / W18; Heating A7 / W35 (4) Cooling A35 / W18; Heating A10 / W35 (7) Operation range heating (outdoor unit): range increase by support back-up heater (8) Operation range hot water (outdoor unit): range increase by support booster heater (9) at 1m distance, free field (10) Contains fluorinated greenhouse gases HPSU Bi-Bloc indoor unit RHBH (Heating) / RHBX (Heating/Cooling) 04CB3V 08CB9W 11CB9W 16CB9W Dimensions Unit Height mm Depth mm Width mm Weight Unit RHBH / RHBX kg 40 / / / / 46 Operation range Heating Water side Min. C 15 (2) 15 (2) 15 (2) 15 (2) Max. C Cooling Water side Min. C 5 (4) 5 (4) 5 (4) 5 (4) (version RHBX) Max. C Domestic hot water Water side Min. C Max. C 80 (3) 80 (3) 80 (3) 80 (3) Notes (2) 15 C bis 25 C: BUH only, no heat pump operation = during commissioning. All ROTEX heat pumps with the visual Comfort 365 are not only designed for heating, but also for cooling when combined with an underfloor heating system. Your customised climate 365 days a year. Fan convector ROTEX HP convector The ROTEX HP convector is the ideal supplement to the ROTEX low temperature heat pump for rooms that lack underfloor heating. Thanks to its particularly quiet operation, it is suitable for use in bedrooms. Due to quiet fans, effiecient heating and cooling is possible and the integral, electronic room temperature controller ensures the climate is just right in every room. Accessories can be found in the current ROTEX pricelist. Please check with your heating contractor. Information in printed materials subject to correction and technical modification. Energy efficiency labels and current product datasheets can be obtained using the Energy Label Generator at

14 System efficiency with Solar*: * ROTEX system consisting of: HPSU monobloc 5 kw H/C, RKRUCBL1 HYC 319/19/0-DB, 2 solar collectors V26P XL A ++ A + HPSU monobloc RDLQ05CAV3 RDLQ07CAV3 RBLQ05CAV3 RBLQ07CAV3 Energy efficiency class Space heating Flow temperature A++ A++ A++ A++ 35 C (without control) Flow temperature A++ A++ A++ A++ 55 C (without control) Flow temperature 55 C with integrated control A++ A++ A++ A++ Heating capacity Nom. kw 4.40 (1) 4.03 (2) 7.00 (1) 6.90 (2) 4.40 (1) 4.03 (2) 7.00 (1) 6.90 (2) Cooling capacity Nom. kw 3.88 (1) 4.17 (2) 5.20 (1) 5.36 (2) COP 5.00 (1) 3.58 (2) 4.52 (1) 3.42 (2) 5.00 (1) 3.58 (2) 4.52 (1) 3.42 (2) EER 4.07 (1) 2.32 (2) 3.80 (1) 2.29 (2) Dimensions Unit Height mm Width mm 1,090 1,090 1,090 1,090 Depth mm Weight Unit kg Operation range Heating Ambient Min. CDB Max. CDB Water side Min. C 15 (4) 15 (4) 15 (4) 15 (4) Max. C Cooling Ambient Min. CDB Max. CDB Water side Min. C Max. C Sound power level Heating Nom. dba Cooling Nom. dba Sound pressure level Heating Nom. dba 48 (8) 49 (8) 48 (8) 49 (8) Cooling Nom. dba 48 (8) 50 (8) Refrigerant Type R-410A (13) R-410A (13) R-410A (13) R-410A (13) GWP 2, , , ,087.5 Charge kg TCO2eq Compressor Starting method Inverter controlled Notes (1) Cooling A35/W18; Heating A7/W35 (2) Cooling A35/W7; Heating A7/W45 (4) 15 C with back-up heater (8) at 1m distance, free field (13) Contains fluorinated greenhouse gases HPU ground Energy efficiency class Space heating Flow temperature 55 C (without control) Flow temperature 55 C with integrated control Water heating energy efficiency (tapping profile) RGSQH10S18AA9W A++ Heating capacity Nom. kw 10.2 (1) Max. kw 13.0 (1) COP 4.35 (1) Dimensions Unit Height mm 1,732 Depth mm 600 Width mm 728 Weight Unit kg 210 Operation range Heating Water side Min. C 24 (7) 24 (8) Max. C 60.0 (7) 65.0 (8) Hot water Water side Min. C 25 (7) 25 (9) Max. C 55 (7) 60 (9) Tank Water volume l 180 Maximum water temperature C 60 Sound power level Nom. dba 46.0 Sound pressure level Nom. dba 32.0 (6) Refrigerant Type R-410A (10) GWP 2,087.5 Charge kg 1.80 TCO2eq 3.76 Compressor Starting method Inverter controlled Notes (1) Heating B0 / W35 / (6) at 1m distance, free field / (7) with heat pump / (9) with BUH only / (10) Contains fluorinated greenhouse gases A++ A (L) All ROTEX heat pumps with the visual Comfort 365 are not only designed for heating, but also for cooling when combined with an underfloor heating system. Your customised climate 365 days a year. Accessories can be found in the current ROTEX pricelist. Please check with your heating contractor. Information in printed materials subject to correction and technical modification. Energy efficiency labels and current product datasheets can be obtained using the Energy Label Generator at

15 System efficiency with Solar*: * ROTEX system consisting of: HPU hybrid 8/32 kw H/C, HYC 544/32/0-DB, 4 solar collectors V26P XL A ++ A +++ HPU hybrid outdoor unit RVLQ05CAV3 RVLQ08CAV3 Corresponding heat pump indoor unit RHYHBH (Heating) RHYHBX (Heating/Cooling) RHYHBH05AAV3 RHYHBH08AAV3 RHYHBX08AAV3 Related gas condensing unit RHYKOMB33AA2 RHYKOMB33AA2 Energy efficiency class Space heating Flow temperature A++ A++ 55 C (without control) Flow temperature 55 C with integrated control A++ A++ Water heating energy A (L) A (L) efficiency (tapping profile) Heating capacity Nom. kw 3.27 (2) 4.40 (3) 5.80 (2) 7.40 (3) Max. kw 4.8 (2) 5.1 (3) 7.7 (2) 10.2 (3) Cooling capacity Max. kw 8.43 (3) 6.35 (4) COP 5.04 (3) 4.45 (3) EER 3.42 (3) Dimensions Unit Height mm Depth mm Width mm Weight Unit kg Operation range Heating Ambient Min. C -25 (5) -25 (5) Max. C Cooling Ambient Min. C 10 Max. C 43 Sound power level Heating Nom. dba Sound pressure level Heating Nom. dba 48 (5) 49 (5) Refrigerant Type R-410A (8) R-410A (8) GWP 2, ,087.5 Charge kg TCO2eq Compressor Starting method Inverter geregelt Notes (2) Heating A2 / W35 (3) Cooling A35 / W18; Heizen A7 / W35 (4) Cooling A35 / W7; Heating A10 / W35 (5) at 1m distance, free field 8) Contains fluorinated greenhouse gases HPU hybrid heat pump indoor unit (Heating/Heating and Cooling) RHYHBH05AAV3 RHYHBH08AAV3 RHYHBX08AAV3 Dimensions Unit Height mm 902 (1) 902 (1) 902 (1) Depth mm Width mm Weight Unit kg Operation range Heating Water side Min. C Max. C Cooling Water side Min. C 5 Max. C 22 Notes (1) With airpurge and bottom side water connections, unit height is 1075 mm HPU hybrid gas condensing unit RHYKOMB33AA2 Dimensions Unit Height (case) mm 710 Depth mm 450 Width mm 240 Weight Unit kg 36 Gas Decive class C13, C33, C43, C53, C83, C63, C93 NOx class 5 Heating capacity Efficiency Net calorific value % 107 (1) Operation range Min. C 15 Max. C 80 Domestic hot water Output Min kw 7.6 Max kw 32.7 (2) Notes (1) 40/30 (30%) (2) For the use of maximum heating capacity of the boiler please check available ESP (External Static Pressure) of the internal pump. 1) All ROTEX heat pumps with the visual Comfort 365 are not only designed for heating, but also for cooling when combined with an underfloor heating system. Your customised climate 365 days a year. 2) The ROTEX HPU hybrid product range has won the Plus X Award in recognition of its degree of high quality, functionality and ecology. 1) 2) Accessories can be found in the current ROTEX pricelist. Please check with your heating contractor. Information in printed materials subject to correction and technical modification. Energy efficiency labels and current product datasheets can be obtained using the Energy Label Generator at

16 HPSU hitemp outdoor unit RRRQ011AAY1 RRRQ011AAY1 RRRQ011AAY1 Corresponding indoor unit RKHBRD011ADY1 RKHBRD014ADY1 RKHBRD016ADY1 Energy efficiency class Space heating Flow temperature A+ A+ A+ 55 C (without control) Flow temperature 55 C with integrated control A+ A+ A+ Heating capacity Nom. kw 9,60 (1) 11,90 (1) 13,50 (1) COP 2,48 (1) 2,38 (1) 2,33 (1) Dimensions Unit Height mm Depth mm Width mm Weight Unit kg Operation range Heating Min. CWB Max. CWB Domestic hot water Min. CDB Max. CDB Sound power level Heating Nom. dba Sound pressure level Heating Nom. dba 52 (3) 53 (3) 55 (3) Refrigerant Type R-410A (4) R-410A (4) R-410A (4) GWP 2.087, , ,5 Charge kg 4,5 4,5 4,5 TCO2eq 9,4 9,4 9,4 Compressor Starting method Inverter controlled Notes (1) Heating A2 / W65 (3) at 1m distance, free field (4) Contains fluorinated greenhouse gases RKHTS Thermal store HYC HYC HYC HYC HYC HYC RKHTS 343/19/0-544/19/0-544/32/0-343/19/0-544/19/0-544/32/ ) 260 1) P P P DB DB DB Tank Water volume l Energy efficiency class B B B B B B B B Dimensions Unit Height mm Depth mm Width mm Weight Unit kg Potable water capacity l 27,9 29,0 29,0 27,9 27,9 29,0 193,5 250,5 Hygienic hot water generation on the instantaneous heater principle Solar combination Drain-Back Pressurized solar Solar heating support 1) Only in combination with the 2-stage HPU hitemp high temperature heat pump HPSU hitemp indoor unit RKHBRD011ADY1 RKHBRD014ADY1 RKHBRD016ADY1 Dimensions Unit Height mm Depth mm Width mm Weight Unit kg Refrigerant Type R-134a R-134a R-134a Charge kg 2,60 2,60 2,60 Operation range Heating Water side Min. C Max. C Domestic hot water Water side Min. C Max. C Solaris Flat panels V21P V26P H26P Dimensions Height mm Width mm Depth mm Weight kg Volume l 1,3 1,7 2,1 Surface Outer m2 2,01 2,6 2,6 Coating Micro-therm (absorption max. 96 %, Emission ca. 5% +/- -2%) Absorber Harp-shaped copper pipe register with laser-welded highly selective coated aluminium plate Glazing Single pane safety glass, transmission +/- 92 % Allowed roof angle Min Max The solar panels are standstill resistant in the long-term and are tested for thermal shock. Minimum collector yield over 525 kwh/m 2 at 40% covering proportion, (location Würzburg, Germany). Accessories can be found in the current ROTEX pricelist. Please check with your heating contractor. Information in printed materials subject to correction and technical modification. Energy efficiency labels and current product datasheets can be obtained using the Energy Label Generator at

17 What makes ROTEX different? We offer individual solutions for optimum living and working that are straightforward, intelligent, and futureproof. ROTEX is a manufacturer and supplier of complete innovative and environmentally responsible heating systems building on decades of experience. Since 1973, ROTEX has stood for innovation and know-how in the field of heat generation, storage and distribution. In the development of products for our high grade and perfectly matched components we focus on user benefits. ROTEX Heating Systems GmbH Langwiesenstraße 10 D Güglingen The ROTEX product range extends from heat pumps, condensing boilers for oil and gas, solar thermal systems and thermal stores, not forgetting underfloor heating and heating oil tanks right up to rainwater tanks. Innovative systems that enable optimum use of conventional and alternative energy sources in both detached houses and apartment buildings. Whether in new build or modernisation projects. ROTEX products stand for unique cost efficiency with maximum environmental compatibility and the highest levels of flexibility. ROTEX Heating Systems GmbH is a wholly owned subsidiary of Daikin Europe NV, making it a member of the DAIKIN Group, the world s leading manufacturer and supplier of products for heating, ventilation and climate control. Our combined competence generates optimum product solutions to meet the highest user aspirations. ROTEX Errors and technical modifications reserved 008EN14144_05 02/2016