High Pressure Adsorption Dryer HLP PN 25, 0040 to 0125 HLP PN 40, 0050 to 0155

Size: px

Start display at page:

Download "High Pressure Adsorption Dryer HLP PN 25, 0040 to 0125 HLP PN 40, 0050 to 0155"

Gervais Lamb
5 years ago
Views:

Page 1 of 6 High Pressure dsorption ryer, 0040 to 0125, 0050 to 0155 High pressure adsorption dryer, heatless regenerating, including pre-and afterfilter Product description: ompressed air is lead

1 Page 1 of 6 High Pressure dsorption ryer, 0040 to 0125, 0050 to 0155 High pressure adsorption dryer, heatless regenerating, including pre-and afterfilter Product description: ompressed air is lead through the inlet of the dryer () into the prefilter (3) t this stage, the air is cleaned from particles and condensate The condensate is removed via a hand operated condensate drain (10) or optional via an electronic condensate drain (11) Via the shuttle valve (9) the air is lead into the absorber vessel (1), in which the air is dried to the required dryness level (pressure dewpoint) Thereafter the air flows through the upper non-return valve (9) and an afterfilter (4) which retains eventually accruing abrasion of desiccant Via the systems outlet () the clean and dry air reaches the user's air net uring one vessel is in operation, the water previously accumulated in the other adsorber is removed (regeneration phase) or this process a partial stream of already dried air is lead through a nozzle (7) and brought down to atmospheric pressure or regeneration, purge air is lead over the desiccant bed and then released into the atmosphere via a pneumatically operated valve (5) and a silencer (6) High pressure adsorption dryer ption Steuerluft-ruckminderer 13 ption ontrol air-pressure reducer Steuerluft ontrol air MT MIH 02 MISH ption automatischer Kondensatableiter ption automatic condensate drain tmosphäre atmosphere 12 ption Superplus Ultraconomy inkl ption Steuerluft-ruckminderer incl ption ontrol air-pressure reducer Ko Technical alterations reserved (R05/ 2016/07/19) onaldson iltration eutschland GmbH Industrial iltration Solutions üssingstraße Haan Telefon +49/2129/569-0 Telefax +49/2129/

Page 2 of 6 High Pressure dsorption ryer, 0260 to 1130, 0310 to 1200 High pressure adsorption dryer, heatless regenerating, including pre-and afterfilter Product description: ompressed air is lead

2 Page 2 of 6 High Pressure dsorption ryer, 0260 to 1130, 0310 to 1200 High pressure adsorption dryer, heatless regenerating, including pre-and afterfilter Product description: ompressed air is lead through the inlet of the dryer () into the prefilter (3) t this stage, the air is cleaned from particles and condensate The condensate is removed via a hand operated condensate drain (10) or optional via an electronic condensate drain (11) Via the pneumatically operated valve (V3, V4) in the valve block the air is lead into the absorber vessel (1), in which the air is dried to the required dryness level (pressure dewpoint) Thereafter the air flows through the upper non-return valve (9) and an afterfilter (4) which retains eventually accruing abrasion of desiccant Via the systems outlet () the clean and dry air reaches the user's air net uring one vessel is in operation, the water previously accumulated in the other adsorber is removed (regeneration phase) or this process a partial stream of already dried air is lead through a nozzle (7) and brought down to atmospheric pressure or regeneration, purge air is lead over the desiccant bed and then released into the atmosphere via a pneumatically operated valve (V1, V2) and a silencer (6) High pressure adsorption dryer ption Steuerluft-ruckminderer ption ontrol air-pressure reducer Steuerluft ontrol air MT MIH 02 MISH V1 V3 V5 V4 V2 12 tmosphäre atmosphere ption Superplus Ultraconomy inkl ption Steuerluft-ruckminderer incl ption ontrol air-pressure reducer ption automatischer Kondensatableiter ption automatic condensate drain 11 Ko 6 6 5

3 Page 3 of 6, Volume flow in * Regeneration air losses Volume flow out (min) Pressure loss initial incl filters mbar Pre-filter (afterfilter) M (YG) / / / / / / /30 * related to 1 bar (abs) and 20 at intake of compressor and 7 bar system pressure and 35 inlet temperature into dryer Product description omplete purification package with heatless adsorption dryer which works on the basis of pressure swing adsorption, pre-, afterfilter and hand operated drain, electronic condensate drain optionally Medium: ompressed air/ nitrogen Pressure dewpoint: -40 at 100% load eatures omplete purification package including pre-, afterfilter and hand operated drain (optionally electronic condensate drain) ptimally dimensioned filters Indication of operating status (adsorption, regeneration, pressurizing, service, alarm) via L display Intermittend operation as standard Use of pneumatically controlled seat valves option package available enefits Turnkey-system; all components from one hand, technically perfectly matched to each other Safe separation of particle and aerosols (on adherence to the specified parameters), large filter surface causes low differential pressure of the unit, thereby low operating cost High operating safety, all operating status can be easily detected at any time oupling with the compressor with central applications possible, thus savings of regeneration air and operating cost High operating safety, low pressure losses, low operating and maintenance costs lexibility in application; option package for economic and safe system integration in the compressed air network - dew point-dependent capacity control - electronic condensate drain - control air supply - starting valve perating pressure: min 17 bar (g), max 25 bar (g) Medium temperature: min 5, max 55 mbient: min 4, max 50 Power supply: 230 V/ 50-60Hz Power consumtion: approx 40 W Pressure vessel - design, manufacture, testing dsorber and filter acc to 2014/6/U eclaration of conformity: acc to 97/23/ Sizing: Inlet temperature perating pressure (bar) xample: V nom = 200, Inlet temperature = 40 perating pressure = 20 bar (ü) Pressure dewpoint = -40 V corr = V nom f 200 = = 063 Selected adsorption dryer: 0500-PN

4 Page 4 of 6, Volume flow in * Regeneration air losses Volume flow out (min) Pressure loss initial incl filters mbar Pre-filter (afterfilter) M (YG) / / / / / / /30 * ezogen auf 1 bar (abs) und 20 nsaugzustand und 7 bar (ü) und 35 intrittstemperatur Product description: omplete purification package with heatless adsorption dryer which works on the basis of pressure swing adsorption, pre-, afterfilter and hand operated drain, electronic condensate drain optionally Medium: ompressed air/ nitrogen Pressure dewpoint: -40 at 100% load eatures omplete purification package including pre-, afterfilter and hand operated drain (optionally electronic condensate drain ) ptimally dimensioned filters Indication of operating status (adsorption, regeneration, pressurizing, service, alarm) via L display Intermittend operation as standard Use of pneumatically controlled seat valves option package available enefits Turnkey-system; all components from one hand, technically perfectly matched to each other Safe separation of particle and aerosols (on adherence to the specified parameters), large filter surface causes low differential pressure of the unit, thereby low operating cost High operating safety, all operating status can be easily detected at any time oupling with the compressor with central applications possible, thus savings of regeneration air and operating cost High operating safety, low pressure losses, low operating and maintenance costs lexibility in application; option package for economic and safe system integration in the compressed air network - dew point-dependent capacity control - electronic condensate drain - control air supply - starting valve perating pressure: min 26 bar (g), max 40 bar (g) Medium temperature: min 5, max 55 mbient: min 4, max 50 Power supply: 230 V/ 50-60Hz Power consumtion: approx 40 W Pressure vessel - design, manufacture, testing dsorber and filter acc to 97/23/ eclaration of conformity: acc to 2014/6/U Sizing: Inlet temperature perating pressure (bar) xample: V nom = 200, Inlet temperature = 40 perating pressure = 34 bar (ü) Pressure dewpoint = -40 V corr = V nom f 200 = = 067 Selected adsorption dryer: 0310-PN40 295

5 Page 5 of 6, ,5 390 N G 1/4" Ko onnection N G 1 / G 1 / G 1 /

6 Page 6 of 6, Ko G N I G 1/4" H onnection N G 3 / G G 1 1 / G 1 1 / G H I

High Pressure Dryer HLP-MSD 0055 to 0870, PN 100 to PN 400

High Pressure Dryer HLP-MSD 0055 to 0870, PN 100 to PN 400 Technical ata Sheet Page 1 of 6 igh Pressure ryer -MS 0055 to 0870, PN 100 to PN 400 igh pressure adsorption dryer, heatless regenerating, pre-, and afterfilter included Compressed air is lead through