UNICLEAN sl. Washer Disinfector for Labs. protecting human health

Size: px

Start display at page:

Download "UNICLEAN sl. Washer Disinfector for Labs. protecting human health"

Darren Cox
5 years ago
Views:

1 UNICLEAN sl Washer Disinfector for Labs Flexible solution aimed at productivity. Configurable accessories for optimal washing results... protecting human health

MMM Group BMT Medical Technology s.r.o. New Product Line UNICLEAN sl Actively Provable Quality Since 1954, the MMM Group globally operates as one of leading system suppliers of products in health service.

the MMM established itself as an excellent quality and innovation provider in German and international markets. BMT Medical Technology s.r.o. is an active member of the MMM Group with many years of tradition in the field of steam sterilizers manufacture.

We arrange extensive range of manufacture and simultaneously we meet high demands on quality in the field of health care and laboratory engineering.

The new washer disinfectors UNICLEAN SL represent an ideal option for preparation of laboratory glass in everyday use in labs and research centres, guaranteeing tested and stable

The field of devices use includes the complete range of laboratory glass used while using specially developed baskets and insertions developed to satisfy all the needs of our clients.

2 MMM Group BMT Medical Technology s.r.o. New Product Line UNICLEAN sl Actively Provable Quality Since 1954, the MMM Group globally operates as one of leading system suppliers of products in health service. Thanks to its complex offer of products and services, washing, sterilization and disinfection equipment for hospitals, scientific institutes, laboratories and pharmaceutical industry, the MMM established itself as an excellent quality and innovation provider in German and international markets. BMT Medical Technology s.r.o. is an active member of the MMM Group with many years of tradition in the field of steam sterilizers manufacture. Our production plant in Brno manufactures devices and equipment for central sterilisation units according to requirements of our clients all over the world. We arrange extensive range of manufacture and simultaneously we meet high demands on quality in the field of health care and laboratory engineering. At the present time, BMT extends the traditional and time-proved portfolio of steam sterilizers in the new line of washer disinfectors UNICLEAN SL designed for washing and disinfection of the wide range of laboratory glass. The current range of products can thereby address much wider range of clients like labs, mainly the work sites that need washing and decontamination of laboratory glass. The new washer disinfectors UNICLEAN SL represent an ideal option for preparation of laboratory glass in everyday use in labs and research centres, guaranteeing tested and stable quality of resulting washing. The field of devices use includes the complete range of laboratory glass used while using specially developed baskets and insertions developed to satisfy all the needs of our clients. The company BMT Medical Technology s.r.o. is fully certified for quality management system according to EN ISO 9001 and EN ISO Devices of the line UNICLEAN SL meet all and any required technical and legislative regulations. They are designed and constructed in such a way so as to meet EN ISO /2 and HTM The Certificate of Compliance has been issued for the devices. laboratories pharmacy BSL 3 / BSL 4 biomodels MMM Group perfection in laboratory and medical technique. 2 3

List of Disinfection Washers BMT Medical Technology s.r.o. presents a new line of professional washing and disinfection automatic devices designed for machine preparation of laboratory glass.

Typical use Laboratory glass washing: test tubes Petri dishes beakers Erlenmeyer flasks bottles Imhoff cones graduated vessels funnels pipettes and others UNICLEAN SL L 170 chamber volume basket

UNICLEAN SL L 200 chamber volume basket volume max.

3 List of Disinfection Washers BMT Medical Technology s.r.o. presents a new line of professional washing and disinfection automatic devices designed for machine preparation of laboratory glass. UNICLEAN SL L 170 UNICLEAN SL L 200 UNICLEAN SL L 600 Characteristics external perfection innovative inner equipment exceptional washing skills perfect drying high speed easy and intuitive service Typical use Laboratory glass washing: test tubes Petri dishes beakers Erlenmeyer flasks bottles Imhoff cones graduated vessels funnels pipettes and others UNICLEAN SL L 170 chamber volume basket volume max. load 170 litres 150 litres 20 kg It is suitable mainly for placement in small premises for laboratories requiring small washing capacity of laboratory glass. UNICLEAN SL L 200 chamber volume basket volume max. load 200 litres 170 litres 20 kg Ideal for use in large laboratories with small volume of treated glass UNICLEAN SL L 600 Chamber volume Basket volume Max. load 600 litres 430 litres 150 kg Large capacity washing disinfector designed for large labs requiring high capacity of washing in everyday practice. 600 litres Basic characteristics UNICLEAN SL L 170, UNICLEAN SL L 200, UNICLEAN SL L 600 Construction optional size of the device with chamber of 170, 200 or 600 l telescopic load-carrying rails allowing easy handling of treated glass in case of large-volume washer UNICLEAN SL L 600: variable layout of chamber floors possibility of building into a stainless steel wall (except for UNICLEAN SL L170) optional heat source own, external, combined )depending on type and specification by the client) wide range of optional equipment for minimisation of operation costs and increase of the device productivity (pre-heating tanks, increased heating performance ) possibility of specific additives selection and options for improving the staff s comfort (lighting, USB, Ethernet ) Quality and Safety Guarantee Economic Character tanks for water pre-heating with controlled level reduce the cycle time three-level system of water filtration prolongs service life of the pump integrated system of water softening reduces the consumption of necessary detergents adjustable temperature and time of filtrated forced glass drying arranging optimal conditions Washing and Disinfection Processes Standard Washing Process The washing process consists of individual phases separated by used water discharge from the previous cycle. Standard Washing Process DRYING after successful completion of washing phases there follows the drying process, which removes residual water from products. The drying process is divided into two phases: - Low speed for condensate removal - High speed for perfect drying of a product So as to improve the drying process, it is possible to add water drainage ease preparation to the final rinsing phase Detergents High and stable quality of detergents significantly affects the successful course of a cycle. Depending on character of washed means it is possible to use alkali or ph neutral preparations. We recommend the following manufacturers of washing and disinfection means: DR. WEIGERT (Germany) BORER CHEMIE (Switzerland) ECOLAB (USA) 200 litres Standard washing process consists of: polished washing chamber, PRE-WASHING a basic step for washing arms, pre-heating tanks blood removal from tools. There and three-level system of water is used water up to 25 C without So as to reach correct results it is filtration any chemicals added. This is the necessary to use water of optimal filters made of high-quality fast phase, up to 2 min. hardness, suitable chemical in the stainless steel AISI 316L (DIN ) MAIN WASHING there is used right time and to maintain required transparent door of the washing warm water of C including temperature for specific time. 170 litres chamber allowing continuous control chemicals (it is alkali or ph of washing process by the staff neutral detergent) (optional for L 170) NEUTRALISATION necessary only electrically locked and blocked door in case of use of alkali detergent auto diagnostics of the device in main washing phase. In this controls functionality of all the case it is necessary to include into important modules of sensors and the cycle the neutralisation step in case of establishing any fault with alkali detergent. it records the fault, reports it and RINSING it removes the residuals possibly it even stops the current of chemical used from the washing program treated product. Demi-water is regulation and recording recommended to be used in this of temperature using two phase. independent sensors PT1000 THERMO DISINFECTION this is pressure sensor for constant the final phase of the washing UNICLEAN SL L 170 UNICLEAN SL L 200 UNICLEAN SL L 600 monitoring of the pump process. The A0 parameter is measuring of water conductivity measured and assessed here, in the course of final rinsing indicating the level of disinfection water regulation using minimal reached. water level sensor and device 4 overflowing sensor 5

UNICLEAN SL L 170 Control panel chamber volume - 170 litres, basket volume - 150 litres, max.

Simple installation with necessity of electric connection, cold water and sewerage connection can be used mainly in small private practices for thermal disinfection and washing of laboratory glass.

The device is ideal for reduction and elimination of professional risk caused by handling the infectious material.

resistant stainless steel structure of the device and its outer shell of steel (AISI 304) is characterised by long service life chamber, washing arms and filter tanks of high-quality steel (AISI

make washing easier and they avoid impurities sticking [1] [2] [3] 480 mm 210 mm 250 mm Typical use 6 all types of laboratory glass long glass pipettes up to 300 mm max. height of vessel 400 mm max.

white two line LCD display, it shows the program phases, current date and time, control temperature and regulation temperature, required temperature of the phase, value Ao control and regulation,

4 UNICLEAN SL L 170 Control panel chamber volume litres, basket volume litres, max. load - 20 kg UNICLEAN SL L 170 is designed specifically for installation in limited space as a stand-alone device with front filling, suitable for placement under the desk plate. Simple installation with necessity of electric connection, cold water and sewerage connection can be used mainly in small private practices for thermal disinfection and washing of laboratory glass. After closing the manually open hinged door, the washing process is automatically performed. This small model includes built-in washing and air drying on two levels generally used at large devices. The device is ideal for reduction and elimination of professional risk caused by handling the infectious material. Characteristics small inner dimensions washing and drying on two levels built-in steam condenser integrated water softener two up to three dosing pumps output for external printer Structure stable, resistant stainless steel structure of the device and its outer shell of steel (AISI 304) is characterised by long service life chamber, washing arms and filter tanks of high-quality steel (AISI 316L) manually controlled hinged chamber door of steel inclined chamber bottom avoids water accumulation in the chamber and it speeds up drainage and drying rounded corners and edges of the chamber make washing easier and they avoid impurities sticking [1] [2] [3] 480 mm 210 mm 250 mm Typical use 6 all types of laboratory glass long glass pipettes up to 300 mm max. height of vessel 400 mm max. number of nozzles per stage 36 built-in control systems management and control of all the programs of the device and their phases ergonomic control panel built in the device jacket, with black and white two line LCD display, it shows the program phases, current date and time, control temperature and regulation temperature, required temperature of the phase, value Ao control and regulation, remaining time of the cycle and possible error messages of the device Start and Stop push buttons on the main panel of the device Drying push button for drying phase omission in standard selected cycle every pressing of the control panel is indicated by a sound signal current status of the device is indicated by eight functional LED diodes on the control panel access to the cycle parameters is protected by a password according to ISO /2 Programs, documentation of batches 20 standard washing and disinfection programs and 20 others according to client s specification direct selection of the most frequently selected programs on the control panel: - P1 - short cycle, suitable for slightly polluted objects - P2 - standard cycle, suitable for generally polluted objects - P3 - intensive cycle, suitable for highly polluted objects access to other pre-set program via the button P+ programs developed specially for various type of treated products, types of pollution or types of washing (bottles, blood, microbiological, oils and petrol, thermo chemical disinfection, enzymatic cleaning) two short pre-set programs for simple rinsing of treated products with cold water or for drying of already washed objects batches documentation connection to printer or PC (RS 232) or to computer network (LAN) together with software application Ecosoft Optional Equipment - Baskets, Sieves... Information on possibilities of optional equipment, baskets and sieves, their combinations and methods of selection can be found on page For standard baskets see page 16. 7

UNICLEAN SL L 200 chamber volume - 200 litres, basket volume - 170 litres, max. load - 20 kg Control panel Programs, documentation of batches Optional Equipment - Baskets, Sieves.

It is designed specifically for installation in limited space as a stand-alone device with manually open door.

Structure washing and drying on two optional stages stainless steel structure of the device and its outer shell (AISI 304) chamber, washing arms and filter tanks of high-quality steel (AISI 316L)

drainage and drying rounded corners and edges of the chamber make washing easier and they avoid impurities sticking built-in lockable lower case for up to three five-litre detergent jars

printer two-line mono chromatic LCD display built-in control systems management and control of all the programs of the device and their phases ergonomic control panel built in the device jacket, with

regulation, remaining time of the cycle and possible error messages of the device Start and Stop push buttons on the main panel of the device Drying push button for drying phase omission in standard

5 UNICLEAN SL L 200 chamber volume litres, basket volume litres, max. load - 20 kg Control panel Programs, documentation of batches Optional Equipment - Baskets, Sieves... UNICLEAN SL L 200 is a small model of washing and disinfection device by BMT designed for large laboratories not requiring high washing performance. It is designed specifically for installation in limited space as a stand-alone device with manually open door. This small model includes built-in washing and air drying on two levels generally used at large devices, as well as water softener and steam condenser. Structure washing and drying on two optional stages stainless steel structure of the device and its outer shell (AISI 304) chamber, washing arms and filter tanks of high-quality steel (AISI 316L) manually controlled hinged chamber door of stainless steel with glass looking window for washing process monitoring inclined chamber bottom avoids water accumulation in the chamber and it speeds up drainage and drying rounded corners and edges of the chamber make washing easier and they avoid impurities sticking built-in lockable lower case for up to three five-litre detergent jars Characteristics small inner dimensions washing and drying on two levels two up to four dosing pumps cabinet for detergents built-in steam condenser integrated water softener output for external printer two-line mono chromatic LCD display built-in control systems management and control of all the programs of the device and their phases ergonomic control panel built in the device jacket, with black and white two line LCD display, it shows the program phases, current date and time, control temperature and regulation temperature, required temperature of the phase, value Ao control and regulation, remaining time of the cycle and possible error messages of the device Start and Stop push buttons on the main panel of the device Drying push button for drying phase omission in standard selected cycle every pressing of the control panel is indicated by a sound signal current status of the device is indicated by eight functional LED diodes on the control panel access to the cycle parameters is protected by a password according to ISO /2 20 standard washing and disinfection programs and 20 others according to client s specification direct selection of the most frequently selected programs on the control panel: - P1 - short cycle, suitable for slightly polluted objects - P2 - standard cycle, suitable for generally polluted objects - P3 - intensive cycle, suitable for highly polluted objects access to other pre-set program via the button P+ programs developed specially for various type of treated products, types of pollution or types of washing (bottles, blood, microbiological, oils and petrol, thermo chemical disinfection, enzymatic cleaning) two short pre-set programs for simple rinsing of treated products with cold water or for drying of already washed objects batches documentation connection to printer or PC (RS 232) or to computer network (LAN) together with software application Ecosoft Information on possibilities of optional equipment, baskets and sieves, their combinations and methods of selection can be found on page For standard baskets see page 17. [1] 480 mm [2] 250 mm [3] 180 mm [4] 210 mm [5] 280 mm Typical use all types of laboratory glass long glass pipettes up to 300 mm max. height of vessel 400 mm max. number of nozzles per stage

UNICLEAN SL L 600 chamber volume - 600 litres, basket volume - 430 litres, max. load - 150 kg Typical use Programs, documentation of batches Optional Equipment - Baskets, Sieves.

This is a large model of disinfection washer meeting current increase requirements pun on quality of used laboratory glass treatment.

Structure washing and drying in five optional adjustable stages two washing pumps arranging efficient washing pressure in two separate washing circuits stable, resistant stainless steel structure of

door of stainless steel with glass looking window for washing process monitoring inclined chamber bottom avoids water accumulation in the chamber and it speeds up drainage and drying rounded corners

and drying on five levels two up to four dosing pumps cabinet for four five-litre detergents placement of up to 10 l jars glass door of the chamber possibility of building in a printer optional steam

6 UNICLEAN SL L 600 chamber volume litres, basket volume litres, max. load kg Typical use Programs, documentation of batches Optional Equipment - Baskets, Sieves... UNICLEAN SL L 600 is a large-capacity washing and disinfection automat designed for large laboratories requiring high capacities of laboratory glass washing in everyday practice. This is a large model of disinfection washer meeting current increase requirements pun on quality of used laboratory glass treatment. Simple installation allows building into a wall as well as use as a stand-alone device. Structure washing and drying in five optional adjustable stages two washing pumps arranging efficient washing pressure in two separate washing circuits stable, resistant stainless steel structure of the device and its outer shell of steel (AISI 304) is characterised by long service life chamber, washing arms and filter tanks of high-quality steel (AISI 316L) manually controlled hinged chamber door of stainless steel with glass looking window for washing process monitoring inclined chamber bottom avoids water accumulation in the chamber and it speeds up drainage and drying rounded corners and edges of the chamber make washing easier and they avoid impurities sticking built-in lockable lower case for up to four five-litre detergent jars Characteristics high washing performance washing and drying on five levels two up to four dosing pumps cabinet for four five-litre detergents placement of up to 10 l jars glass door of the chamber possibility of building in a printer optional steam condenser possibility of washing of up to 100 l bottles multi-function colour LCD display all types of laboratory glass long glass pipettes up to 600 mm large-volume vessels (up to 100 litres) max. height of vessel 700 mm max. number of nozzles per stage 72 [1] 770 mm [2] 610 mm [3] 480 mm [4] 370 mm [5] 150 mm [6] 115 mm [7] 90 mm Control panel [8] 180 mm [9] 170 mm [10] 280 mm [11] 290 mm [12] 390 mm [13] 580 mm built-in control systems management and control of all the programs of the device and their phases The ergonomic control panel with a large multi-line LCD display is built in the device covers and it displays program phases, current date and time, control temperature and regulation temperature, required temperature of the phase, control and regulation Ao value, remaining time of the cycle and possible error messages of the device. Start and Stop push buttons on the main panel of the device Drying push button for drying phase omission in standard selected cycle every pressing of the control panel is indicated by a sound signal current status of the device is indicated by eight functional LED diodes on the control panel access to the cycle parameters is protected by a password according to ISO /2 20 standard washing and disinfection programs and 20 others according to client s specification direct selection of the most frequently selected programs on the control panel: - P1 - short cycle, suitable for slightly polluted objects - P2 - standard cycle, suitable for generally polluted objects - P3 - intensive cycle, suitable for highly polluted objects access to other pre-set program via the button P+ programs developed specially for various type of treated products, types of pollution or types of washing (bottles, blood, microbiological, oils and petrol, thermo chemical disinfection, enzymatic cleaning) two short pre-set programs for simple rinsing of treated products with cold water or for drying of already washed objects batches documentation connection to printer or PC (RS 232) or to computer network (LAN) together with software application Ecosoft Information on possibilities of optional equipment, baskets and sieves, their combinations and methods of selection can be found on page For standard baskets see page

UNICLEAN SL - optional equipment L 170 L 200 L 600 I Hot air drying, 98% DOP filter integrated drying guarantees perfectly dry products in the end of the washing cycle C C 1.

Instructions for use: other than English (if available) 4. Electrical heating C C C 5.

Tank for DI (demi) water pre-heating reduction of total time of the program by shortening the time needed for water heating in the chamber x 7.

Another dosing pump in case of using more chemicals it is possible to extend the standard configuration 9.

Inner lighting of the chamber - for better washing process monitoring x 12. HEPA filter of air H14 (spare part) guarantee of safe device servicing 13. Polished chamber - Ra = 0,8µm C C C 14.

Discharge pump reduction of cycle time and elimination of problems with installation in case of unsuitable placement of discharge piping x 16.

Device frame extended in 80 mm placement of several washers in a line x x 19. ON-OFF main switch simple control of the device x x 20. Additional discharge valve of the water pump x x 21.

Two-level case for detergents made of stainless steel 300 630 840H mm - comfortable ergonomic device servicing x x 24.

Standard electric connection: 1 x 230 V, 50 Hz C C C 26. Alternative electric connection: 3x220 V, 50 or 60 Hz S S S 27.

Cover sheet: not shortened, left, including service door C C C 30. Upper covering panel C C C 31. Complementary stainless steel lining (price per 1 m 2 ) 55.

10 l plastic vessel for resin 500h mm with basic and overpressure valve and conductibility system x x 57. 25 l resin x x 58.

7 UNICLEAN SL - optional equipment L 170 L 200 L 600 I Hot air drying, 98% DOP filter integrated drying guarantees perfectly dry products in the end of the washing cycle C C 1. Language version (display) other than English - standard languages of control are: English, German, Spanish 2. Instructions for use: other than English (if available) 3. Instructions for use: other than English (if available) 4. Electrical heating C C C 5. Steam heating from central distribution - FD shortening of time needed for washing water pre-heating x x 6. Tank for DI (demi) water pre-heating reduction of total time of the program by shortening the time needed for water heating in the chamber x 7. Steam condenser it prevents steam output from the washing chamber to the service staff premises C C 8. Another dosing pump in case of using more chemicals it is possible to extend the standard configuration 9. by flow meter for reading the control of detergents dosing - higher standard of dosed quantity control x 10. Auxiliary pump for DI (demineralised) water x 11. Inner lighting of the chamber - for better washing process monitoring x 12. HEPA filter of air H14 (spare part) guarantee of safe device servicing 13. Polished chamber - Ra = 0,8µm C C C 14. Electromagnetic valve of discharge cooling in case of unsuitable waste piping it is possible to decrease discharged water temperature x x 15. Discharge pump reduction of cycle time and elimination of problems with installation in case of unsuitable placement of discharge piping x 16. Water conductivity sensor arrangement of excellent process control in the course of final rinsing x 17. USB port - simple service and device control x 18. Device frame extended in 80 mm placement of several washers in a line x x 19. ON-OFF main switch simple control of the device x x 20. Additional discharge valve of the water pump x x 21. Stainless steel frame C C C 22. Stainless steel basement H mm - comfortable ergonomic device servicing x x 23. Two-level case for detergents made of stainless steel H mm - comfortable ergonomic device servicing x x 24. Thermo printer for process documentation (for Uniclean SL L 170 external) comfortable and well organised way of washed batch revision 25. Standard electric connection: 1 x 230 V, 50 Hz C C C 26. Alternative electric connection: 3x220 V, 50 or 60 Hz S S S 27. Other electric connection according to user specification installation problems solving S S S 28. Cover sheet: not shortened, right C C C 29. Cover sheet: not shortened, left, including service door C C C 30. Upper covering panel C C C 31. Complementary stainless steel lining (price per 1 m 2 ) 55. Water softener arrangement of required quality and economic operation and installation problems solving x l plastic vessel for resin 500h mm with basic and overpressure valve and conductibility system x x l resin x x 58. Water cleaning system: reversal osmosis arrangement of required quality and economic operation and installation problems solving x x 59. Water treatment x x 60 Packaging in plywood box 61. Washer extension to 900 mm in integrated case for detergents and options x x 62. Stainless steel basement H mm for extended washer to 900 mm x x 63. Increased heating performance 8000 W - shortening of time needed for washing water pre-heating x 64. Glass door - for better washing process monitoring x x 65. Ethernet connection x x 66 Remote administration software simple displaying of operation cycles, easy administration of configured devices at CSSD 67 Bar code reader the appropriate washing program is selected after bar code scanning UNICLEAN SL L 170 all possible combination of options Options Stand (22) Cabinet (23) (left or right side) mm machine cabinet (61) (on right side only) 15 I Stand + 900mm cabinet (62) (on right side only) Combination pre-heating tank A B chemical storage B B purification system A 4th dosing pump B integrated printer A A options x non-applicable C included in base S according to specification 12 13

8 Washing system Selection according to Glass Type Injection washing Immersion and washing Test tubes and vials Low capacity volumetric flasks Centrifuge tubes Bulb, graduated, Pasteur pipettes Volumetric flasks narrow neck Graduated cylinders Beakers Jugs Mugs Buckets Jars Weighing bottels Funnels Powder funnels Imhoff cones Wide neck bottels Erlanmeyer flasks wide neck Evaporating dishes Weighing dishes Petri dishes Basins Trays Erlanmeyer flasks narrow neck Flat or round bottom flask narrow neck Funnels Graduated cylinders Erlanmeyer flasks Bottles Beakers Weighing bottels Test tubes Erlanmeyer flasks wide neck Wide or narrow neck bottels weighing bottels Graduated cylinders Imhoff cones First of all, select the way of washing depending on washed glass type i.e. by washing arms, using injectors or by immersion and also the type of glass placement in the device, type of nozzles

UNICLEAN SL L 170 Upper baskets 1 2 1 2 UNICLEAN SL L 200

(1711) 2 Upper basket 25 nozzles 90-140/170H - 6 mm (1712) 3

basket 10 nozzles 90-140/170H - 6 mm (1714) 5 Upper mixed

tubes + 18 nozzles 70-80/110H - 6 mm (1723) 6 Upper basket

(1714) 8 Bearing grid for the basket 1721 decreases the

bottles 224 x 12-19H stacker plate 490 x 250 mm (1858) 5 6 3

basket 20 nozzles 100-140/170H - 6 mm (1725) 3 Upper basket

nozzles 100-140/170H - 6 mm (1727) 5 Upper basket with

nozzles 75-80/110H - 6 mm (1746) 7 Bearing grid for the

Upper mixed basket for bottles (11148) 4 5 6 3 4 9 10 Lower

70-80/110H - 6 mm (1729) 10 Lower basket 20 nozzles

70-80/110H - 6 mm (1731) 12 Lower basket 12 nozzles

placement of pipettes with 120 positions (1733) 14 Lower

basket with 3 cassettes for pipettes with maximal length of

pipettes of the length of 250 and 300 mm with max.

bottles and large-volume Erlenmeyer balloons 4x 240 or 5x

large-volume Erlenmeyer balloons 2x 280 mm (11040) 10 11 15

70-80/110H - 6 mm (1715) 11 Lower basket 25 nozzles

70-80/110H - 6 mm (1717) 13 Lower basket 10 nozzles

9 UNICLEAN SL L 170 Upper baskets UNICLEAN SL L 200 Upper baskets 1 Upper basket 36 nozzles 74-80/110H - 6 mm (1711) 2 Upper basket 25 nozzles /170H - 6 mm (1712) 3 Upper basket 18 nozzles 84-80/110H - 6 mm (1713) 4 Upper basket 10 nozzles /170H - 6 mm (1714) 5 Upper mixed basket for 121 test tubes to centrifuge, bottles and testing tubes + 18 nozzles 70-80/110H - 6 mm (1723) 6 Upper basket with washing arms (1721) 7 Upper basket with washing arms (1714) 8 Bearing grid for the basket 1721 decreases the usable height in 50 mm (1788) 9 Upper basket for washing bottles 224 x 12-19H stacker plate 490 x 250 mm (1858) Upper basket 42 nozzles 70-80/110H - 6 mm (1724) 2 Upper basket 20 nozzles /170H - 6 mm (1725) 3 Upper basket 24 nozzles 70-80/110H - 6 mm (1726) 4 Upper basket 12 nozzles /170H - 6 mm (1727) 5 Upper basket with washing arms 485x525 mm (1728) 6 Upper mixed basket for 121 test tubes to centrifuge, bottles and testing tubes + 24 nozzles 75-80/110H - 6 mm (1746) 7 Bearing grid for the basket 1728 decreases the usable height in 50 mm (1788) 8 Upper mixed basket for bottles (11148) Lower baskets Lower basket 42 nozzles 70-80/110H - 6 mm (1729) 10 Lower basket 20 nozzles /170H - 6 mm (1730) 11 Lower basket 24 nozzles 70-80/110H - 6 mm (1731) 12 Lower basket 12 nozzles /170H - 6 mm (1732) 13 Lower basket for vertical placement of pipettes with 120 positions (1733) 14 Lower basket with 2 cassettes for pipettes with maximal length of 300 mm. The pipettes must be immersed in full (11141) 15 Lower basket with 3 cassettes for pipettes with maximal length of 300 mm (1735) 16 Lower basket (1736) 17 Lower basket for 56 pipettes of the length of 250 and 300 mm with max. length of 535 mm (1989) 18 Lower basket for 5l and10l bottles and large-volume Erlenmeyer balloons 4x 240 or 5x 190 mm (11039) 19 Lower basket for 20l bottles and large-volume Erlenmeyer balloons 2x 280 mm (11040) Lower baskets 10 Lower basket 36 nozzles 70-80/110H - 6 mm (1715) 11 Lower basket 25 nozzles /170H - 6 mm (1716) 12 Lower basket 12 nozzles 70-80/110H - 6 mm (1717) 13 Lower basket 10 nozzles /170H - 6 mm (1718) 14 Lower basket with 120 positions for vertical placement of pipettes (1719) 15 Lower basket with 2 cassettes for pipettes with maximal length of 300 mm (1720) 16 Lower basket: 5 pipettes mm, 2 nozzles H mm, 4 nozzles H mm, 3 nozzles H mm, stacker plate x 230 mm (11196) 17 Lower basket for 48 pipettes of the length of 250 and 300 mm max. length of 535 mm (1759) 18 Lower basket (152L) 19 Lower basket for washing bottles 224 x 12-19H stacker plate 500 x 270 mm (1859)

UNICLEAN SL L 600 Upper baskets 1 Upper basket - 72

nozzles 84-140/170H - 6 mm (1411) 3 Upper basket - 42

nozzles 84-140/170H - 6 mm (1413) 5 Upper mixed basket

tubes + 40 nozzles 65-80/110H - 6 mm (1421) 6 Upper

for placement of small objects on the glass (1446) 8 Grid

glass (1447) 1 2 Inserts into baskets 1 Mesh bowl 1/1

(107) 4 Mesh bowl 1/4 mm 100H (168) Mesh bowl 1/4 mm 130H

(177) 6 Mesh separator for 1/4 bowl (186) 7 Mesh bowl 120

Insert for 30 Petri bowls (197) 9 Insert with 28 flexible

Lower baskets 9 Lower basket 72 nozzles 65-80/110H - 6mm

(1415) 11 Lower basket with 120 positions for vertical

cassettes for pipettes with maximal length of 600 mm.

basket with 3 cassettes for pipettes with maximal length

for 88 pipettes of the length of 300 max.

(1 upper basket) (1416) 16 Lower basket for 10l and25l

10 UNICLEAN SL L 600 Upper baskets 1 Upper basket - 72 nozzles 65-80/110H - 6 mm (1410) 2 Upper basket - 56 nozzles /170H - 6 mm (1411) 3 Upper basket - 42 nozzles 65-80/110H - 6 mm (1412) 4 Upper basket - 32 nozzles /170H - 6 mm (1413) 5 Upper mixed basket for 121 test tubes to centrifuge, bottles and testing tubes + 40 nozzles 65-80/110H - 6 mm (1421) 6 Upper basket with washing arms (1420) 7 Grid to standard basket for placement of small objects on the glass (1446) 8 Grid to standard basket for placement of small objects on the glass (1447) 1 2 Inserts into baskets 1 Mesh bowl 1/1 (162) 2 Mesh bowl 1/2 (162, 166) 3 Mesh 1/1 with holders (107) 4 Mesh bowl 1/4 mm 100H (168) Mesh bowl 1/4 mm 130H (169) Mesh bowl 1/4 mm 200H (170) 5 Mesh bowl cover 1/4 (177) 6 Mesh separator for 1/4 bowl (186) 7 Mesh bowl 120 x 120 x 120 (163) Mesh bowl cover 120x120x120 (164) 8 Insert for 30 Petri bowls (197) 9 Insert with 28 flexible hooks for laboratory glass (161) Lower baskets 9 Lower basket 72 nozzles 65-80/110H - 6mm (1414) 10 Lower basket 56 nozzles /170H - 6mm (1415) 11 Lower basket with 120 positions for vertical placement of pipettes (1416) 12 Lower basket with 2 cassettes for pipettes with maximal length of 600 mm. The pipettes must be immersed in full (1417) 13 Lower basket with 3 cassettes for pipettes with maximal length of 600 mm (1418) 14 Lower basket (1419) 15 Lower basket for 88 pipettes of the length of 300 max. length 450 mm (2 upper baskets) with the length of 700 mm (1 upper basket) (1416) 16 Lower basket for 10l and25l bottles and balloons 4x 300 mm (11177) 17 Lower basket for 50l balloons 2x 400 mm (11178)

Instructions for suitable basket equipment selection Height Control UNICLEAN SL L 170 Selection Procedure BASKET I want standard solution - select the baskets according to given washer and glass or I

NOZZLES select according to - laboratory glass type - laboratory glass height UNICLEAN SL L 200 [1] 480 mm [2] 250 mm [3] 180 mm [4] 210 mm [5] 280 mm The empty frame of the basket provides the

+ = HEIGHT CONTROL check - total height of the basket level - useful height on given washer level In case of the upper stage to be equipped with washing arms, it is necessary to [5] 150 mm reduce the

Just to the contrary, [7] 90 mm we obtain 15mm extra above the given basket.

If necessary, the frame may be equipped with various nozzles or accessories according to client s request.

11 Instructions for suitable basket equipment selection Height Control UNICLEAN SL L 170 Selection Procedure BASKET I want standard solution - select the baskets according to given washer and glass or I want my own solution - basket setup made to measure (continue down) [1 480 mm [2] 210 mm [3] 250 mm FRAME select according to - maximal diameter of glass and number of shelves - upper or lower level NOZZLES select according to - laboratory glass type - laboratory glass height UNICLEAN SL L 200 [1] 480 mm [2] 250 mm [3] 180 mm [4] 210 mm [5] 280 mm The empty frame of the basket provides the client with the possibility of full configuration of his specific requirements. + = HEIGHT CONTROL check - total height of the basket level - useful height on given washer level In case of the upper stage to be equipped with washing arms, it is necessary to [5] 150 mm reduce the usable height under the given stage for UNICLEAN SL L 170 and UNICLEAN SL L [6] 115 mm 200 in approximately 40mm, in case of UNICLEAN SL L 600 in 50mm. Just to the contrary, [7] 90 mm we obtain 15mm extra above the given basket. Placement of washed glass too close to the washing arms or nozzles may cause development of washing shades, where washing efficiency is reduced. If necessary, the frame may be equipped with various nozzles or accessories according to client s request. Sample of client configured basket for the washer UNICLEAN SL L 600 made on the basis of the frame 1414 for simultaneous washing of laboratory glass with diameter of 70 mm, 85 mm and 100 mm. UNICLEAN SL L 600 [1] 770 mm [2] 610 mm [3] 480 mm [4] 370 mm [8] 180 mm [9] 170 mm [10] 280 mm [11] 290 mm [12] 390 mm [13] 580 mm Nozzle type selection Nozzles of the type 2, 4, 6 and 8 with adjustable height of washed glass support. Nozzles of the type 7 and 8 are with support for bottoms with neck diameter of 28mm Nozzle height selection NOZZLE A B C D E [mm] [mm] [mm] [mm] [mm] TYPE Note ,50 4,00 15,00 80,00 75, ,50 4,00 15,00 80,00 75, ,50 4,00 32,00 50,00 30, ,50 4,00 32,00 80,00 60, ,50 4,00 32,00 155,00 135, ,00 5,00 54,00 75,00 50, ,00 5,00 54,00 110,00 80, ,00 5,00 54,00 175,00 130, ,00 10,00 75,00 115,00 85, ,00 10,00 75,00 135,00 95, ,00 10,00 75,00 175,00 130, ,00 10,00 75,00 225,00 185, ,00 10,00 75,00 275,00 235, ,00 10,00 75,00 135,00 105, ,00 10,00 75,00 225,00 185, ,00 10,00 75,00 275,00 235, ,00 10,00 75,00 115,00 85,00 7 bottle support 28mm / 1.10 code ,00 10,00 75,00 135,00 95,00 8 bottle support 28mm / 1.10 code ,00 10,00 75,00 175,00 130,00 8 bottle support 28mm / 1.10 code ,00 10,00 75,00 225,00 185,00 8 bottle support 28mm / 1.10 code ,00 10,00 75,00 275,00 235,00 8 bottle support 28mm / 1.10 code ,00 10,00 flex 175, ,00 10,00 flex 225, ,00 10,00 flex 275, Screw for plugging in the unused connections for nozzles. Select the washing nozzle according to treated glass type and variability. Select the given specific nozzle according to the nozzle type and glass height, in consideration of neck diameter and maximal glass diameter. That means that D and E dimensions are the most important dimensions. So as to guarantee the quality of glass treatment by the given nozzle, it is necessary to meet the minimal and maximal distance of the nozzle end from the glass bottom

Selection of frame type for client s configuration according to the nozzles configuration Selection of basket frame for client solution according to the device, stage and glass diameter UNICLEAN SL L

Type 3 Mixed basket with washing nozzles and possibility of test tubes washing Empty rack code Maximum glassware diameter accepted, related number of glassware positions, upper/lower machine levels

12 Selection of frame type for client s configuration according to the nozzles configuration Selection of basket frame for client solution according to the device, stage and glass diameter UNICLEAN SL L 170 Select the washing cart frame UNICLEAN Pic. Type 1 Basket fully equipped with washing nozzles Pic. Type 2 Basket with sufficient free space Pic. Type 3 Mixed basket with washing nozzles and possibility of test tubes washing Empty rack code Maximum glassware diameter accepted, related number of glassware positions, upper/lower machine levels Max mm Nozzle Configuration according baskets Pic. 1-4 Level U - upper L - Lower SL L E U only for mm 2,5/0.1 nozzles SL L E U only for mm 2,5/0.1 nozzles SL L E U only for mm 2,5/0.1 nozzles SL L E U only for mm 2,5-4/ nozzles SL L E U SL L E U SL L E U SL L E U SL L E L only for mm 2,5/0.1 nozzles SL L E L only for mm 2,5/0.1 nozzles SL L E L only for mm 2,5-4/ nozzles SL L E L SL L E L SL L E L SL L E L SL L E L SL L E L Pic. Type 4 Basket designed for test tubes washing SL L E L mm 250x490 / 9.84 x19.29 space SL L E L mm 290x490 / x19.29 space SL L E L mm 265x490 / x19.29 space SL L E L See accessories 11086, 11061, Note UNICLEAN SL L 200 Select the washing cart frame UNICLEAN SL L 600 Maximum glassware diameter accepted, related number of glassware positions, upper/lower machine levels UNICLEAN Empty rack code Max mm Nozzle Configuration according baskets Pic. 1-4 Level U - upper L - Lower SL L E U only for mm 2,5/0.1 nozzles SL L E U only for mm 2,5/0.1 nozzles SL L E U only for mm 2,5/0.1 nozzles SL L E U SL L E U SL L E U SL L E U mm 200x490 / 7.87 x19.29 space SL L E U SL L E U only for mm 2,5/0.1 nozzles SL L E L only for mm 2,5/0.1 nozzles SL L E L only for mm 2,5/0.1 nozzles SL L E L only for mm 2,5-4/ nozzles SL L E L SL L E L SL L E L SL L E L SL L E L mm 230x490 / 9.06 x19.29 space SL L E L mm 220x490 / x19.29 space SL L E L See accessories 11086, 11061, Select the washing cart frame UNICLEAN Empty rack code Maximum glassware diameter accepted, related number of glassware positions, upper/lower machine levels Max mm Nozzle Configuration according baskets Pic. 1-4 Level U - upper L - Lower SL L E U only for mm 2,5/0.1 nozzles SL L E U SL L E U SL L E U SL L E U SL L E U SL L E U see 11086, 11061, accessories SL L E U See accessories 11086, 11061, SL L E L SL L E L SL L E L SL L E L SL L E L SL L E L SL L E L Select the washer, then the upper or lower basket. Then select the configuration of basket nozzles (type 1-4) and finally select the basket according to maximal diameter of washed glass, in consideration of intended type of the nozzle used. Note Note

Components 1 Support for injection nozzle 6 mm / H.

186 mm (1054926) 2 Support of bottles for injection nozzle 6 mm / H.

130 mm (1054916) 3 Nozzle cap 4,0 mm for nozzles 2,5 mm (1054006) Nozzle

(1054007) 5 Cap of bottles support on the nozzles (1054028) 6 Plastic

nozzle 2,5 / 4,0 / 6,0 mm (1054008, 1054009, 1054010) 8 Plastic cross of

6 mm for necks of 28 / 33 / 45 mm (1054037, 1054038, 1054040) 10 Cone for

Injection nozzle 6 mm / H 170 mm (1102901) 14 Injection nozzle tube 4 mm /

130 / 170 / 220 mm (1054917, 1054918, 1054919, 1054920) 16 Nozzle for

/ 4,0 / 6,0 mm (1054016, 1054015, 1054014) 18 Flat spring for injection

25 mm / H 40 mm (1056003) 20 Sealing support for pipettes 8 mm, 25 mm / H

13 Components 1 Support for injection nozzle 6 mm / H. 140 mm ( ) Support for injection nozzle 6 mm / H. 186 mm ( ) 2 Support of bottles for injection nozzle 6 mm / H. 200 mm ( ) Support of bottles for injection nozzle 6 mm / H. 130 mm ( ) 3 Nozzle cap 4,0 mm for nozzles 2,5 mm ( ) Nozzle cap 5,0 mm for nozzles 4,0 mm ( ) 4 Nozzle cap with two holes ( ) 5 Cap of bottles support on the nozzles ( ) 6 Plastic seating cone of a nozzle ( ) 7 Plastic cross of support 54 mm for nozzle 2,5 / 4,0 / 6,0 mm ( , , ) 8 Plastic cross of support 80 mm for nozzle 6,0 mm ( ) 9 Support of bottles for nozzles 6 mm for necks of 28 / 33 / 45 mm ( , , ) 10 Cone for pipette placement 20 mm / H 22 mm ( ) 11 Silicon protective support for pipettes max. 11 mm ( ) 12 Cover of silicon protective support for pipettes max. 11 mm ( ) 13 Injection nozzle 6 mm / H 170 mm ( ) 14 Injection nozzle tube 4 mm / H 100 / 170 mm ( , ) 15 Injection nozzle tube 6 mm / H 110 / 130 / 170 / 220 mm ( , , , ) 16 Nozzle for hoses washing 25 mm / H 40 mm ( ) 17 Spring for injection nozzle 2,5 / 4,0 / 6,0 mm ( , , ) 18 Flat spring for injection nozzle 4,0 / 6,0 mm ( , ) 19 Sealing for pipettes cone 6 mm, 25 mm / H 40 mm ( ) 20 Sealing support for pipettes 8 mm, 25 mm / H 40 mm ( ) 2 21 Cap for closing unused nozzle holes ( ) 22 Profile blind flange / ( , )

Client Service Arrangement Environmental Consciousness TECHNICAL PARAMETERS UNICLEAN SL L Together with classic supplies of engineering we offer further range of services connected with development

consulting and project development including logistics and capacity calculations supply of engineering including individual information systems on turnkey Service and support of the clients are

A special autodiagnostics program has been developed for arrangement of user s comfort and possibility of fast and high-quality service intervention.

of the work site. All these features guarantee low operation costs and long service life of the device. The device meets all and any current environmental requirements.

Even in the workshop manufacture there are used environment friendly methods of processing. All the significant parts of the device and the package are recyclable.

Environment friendly liquidation is performed after dismantling by authorised person in compliance with EU regulations corresponding with the WEEE regulation (Waste Electric and Electronic Equipment).

External dimensions WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT Net weight Gross weight SC Net w.

14 Client Service Arrangement Environmental Consciousness TECHNICAL PARAMETERS UNICLEAN SL L Together with classic supplies of engineering we offer further range of services connected with development of central and chart room sterilizations. consulting and project development including logistics and capacity calculations supply of engineering including individual information systems on turnkey Service and support of the clients are arranged in fully by a global network of contractual organisations of BMT Medical Technology s.r.o. We have an extensive network of brand service shops connected to HOT-LINE service providing fast reaction to clients questions and requirements. A special autodiagnostics program has been developed for arrangement of user s comfort and possibility of fast and high-quality service intervention. We offer ON-LINE internet diagnostics and monitoring of the sterilisation device (RMS), providing fast and direct communication with the engineering and it provides fluent and trouble-free operation of the work site. All these features guarantee low operation costs and long service life of the device. The device meets all and any current environmental requirements. Do not burden work and life environment. Only high-quality materials guaranteeing long service life of the device have been used in manufacture. The device does not produce any harmful waste. Even in the workshop manufacture there are used environment friendly methods of processing. All the significant parts of the device and the package are recyclable. The device consists of 95% of steel, 4% of other materials, 1% electro material and plastics. Environment friendly liquidation is performed after dismantling by authorised person in compliance with EU regulations corresponding with the WEEE regulation (Waste Electric and Electronic Equipment). Control panel LCD BMT washing disinfectors Dimension [mm] Weight [kg] Volume [l] Electric connection Type of use Small Size [litres] Number of doors Model UNICLEAN SL Washing chamber dimensions External dimensions WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT Net weight Gross weight SC Net w. Chamber volume Basket volume Power [kw] Fuses [A] ED FD ED FD SL L C ,6/8 15/ SL L C ,3 21 Big SL L S Standard electric connection 3 PE AC 400/50/60/Hz Noise level max 59 db X = non applicable C = included in base S = according to client s requirements ED = electric water heating FD = steam water heating KP = steam condenser Changes in the design and make reserved. The values may differ depending on specific charge and media parameters. Disinfection is not the end of our offer maximally reliable laboratory and pharmaceutical sterilizers STERIVAP HP IL Technology in the man s service easily, economically, safely

15 For more information see our internet web site Make acquaintance with our further offers... Small steam sterilizers l Steam sterilizers l Laboratory drying devices and incubators l Stainless steel instrumentation Formaldehyde sterilizer 110 l Hot-air sterilizer l Washer Disinfectors Cleaning and disinfection agents BMT Medical Technology s.r.o., Cejl 157/50, Zábrdovice, CZ Brno Tel.: , fax: , mail@bmt.cz, UNICLEAN SL L 06/2018 EN/PR Photo T. Benda

STERILAB Steam sterilizer with gravitation de-aeration (without vacuum pump) for laboratory purposes.

STERILAB Steam sterilizer with gravitation de-aeration (without vacuum pump) for laboratory purposes. Generation of small steam sterilizers protecting human health MMM Group BMT Medical Technology s.r.o.