Document # R00

Size: px

Start display at page:

Download "Document # R00"

Valerie Daniel
5 years ago
Views:

1 Viconics VT7200 Series PIR Ready Zoning Thermostats General The VT7200 series PIR Ready low-voltage microprocessor-based zoning thermostats have been specifically designed to control either 0-10Vdc, staged, three-point floating heating or cooling terminal systems. Non-communicating stand-alone as well as communicating BACnet, Echelon and Zigbee wireless models are available depending on the application. Quality Assurance - The thermostat shall be manufactured within a certified ISO 9001 and ISO facility and must have the following industry approvals: All models: UL 873 (US) CSA C22.2 No.24 (CANADA) File E27734 with CCN XAPX (US) XAPX7 (CANADA) Industry Canada : ICES-003 (Canada) Stand-Alone, BACnet & Lon models: FCC Compliant to CFR 47, Part 15, Subpart B, Class A (US) CE EMC Directive 89/336/EEC (Europe Union) C-Tick AS/NZS CISPR 22 Compliant (Australia / New Zealand) Supplier Code number N10696 Wireless models FCC: Compliant to: Part 15, Subpart C VT7200 General The low-voltage zoning thermostat shall be capable of (ON/OFF, three point floating, 0-10Vdc analog) control of a VAV damper actuator, two-pipe heating and/or cooling applications, or four-pipe heating and cooling applications as well as auxiliary re-heat (if necessary). The thermostat shall be (a noncommunicating stand-alone model, BACnet MS_TP communicating model, Echelon Lontalk communicating model or Zigbee wireless communicating model). Thermostat shall be equipped with large, 2 line, 16 character LCD dual intensity backlit display with two status LEDs showing heating or cooling mode. Thermostat shall achieve accurate temperature control using a PI proportional-integral algorithm. Traditional differential-based thermostats are not acceptable. Thermostat shall have an embedded local real text configuration utility for simplified sequence selection, start-up and configuration using an integrated three-button keypad. Thermostats requiring external configuration tools or network interface for start-up and configuration are not acceptable. Thermostat shall be supplied (without networking interface, BACnet MS_TP network interface, Echelon Lontalk network interface, Zigbee wireless network interface). BACnet MS/TP versions shall be provided with Protocol Implementation Conformance Statement or Lonmark approval disclosing all object/snvt properties and instance numbers to facilitate the integration process. Echelon-Lontalk Communicating versions shall be provided with appropriate application files and LNS plug-in as required free of charge from the manufacturer. Thermostat shall utilize EEPROM memory to back up local configuration parameters in the event of power failure. Thermostats requiring batteries, or have no provisions for retention during loss of power shall not be acceptable. Thermostat shall have integrated changeover function, which will allow seamless switching between cooling and heating mode based upon temperature or network value input. Thermostat shall be provided with two (2) floating or two (2) analog proportional-integral control outputs and one configurable auxiliary output to be used for heating, or local digital output. Thermostat shall be compatible with the Viconics VI-PIR Passive Infrared cover for advanced active occupancy logic. An additional occupancy level Stand-by shall be added between occupied and unoccupied modes for additional energy savings strategies. The thermostat can be retrofitted with the VI-PIR cover on site.

2 Thermostat shall be capable of local or remote override during unoccupied mode. The thermostat shall resume occupied setpoints and will revert back to unoccupied setpoints after a certain amount of time (adjustable from 0 24hours in one hour increments). Thermostat shall have configurable temporary or permanent local override setpoints. When the temporary setpoints mode is enabled, once the temporary occupancy timer expires, the setpoints will revert back to their default values. Thermostat shall have four (4) adjustable keypad lockout levels limiting access to changes of occupied and unoccupied setpoints. Thermostat shall have adjustable local unoccupied heating and cooling setpoint limits as well as maximum heating and minimum cooling limits. Thermostat shall have an adjustable deadband (from 2 F to 5 F in 1 increments, 1 C to 2.5 C in 0.5 increments). Thermostat shall provide the following local monitoring capabilities: DI-1 1. None: No function will be associated with the input (free input to be used for alarming or monitoring of a remote digital contact to be shared over a communications network). 2. Remote Night Setback: Remote night setback timer clock input. Scheduling shall be set as per the binary input providing low cost setback operation via a dry contact. 3. Motion NO and Motion NC: Advanced PIR occupancy functions using Normally Open (NO) or Normally Closed (NC) remote PIR motion sensor. Occupancy mode shall be set as per applied PIR function and configuration 4. EMS: Door/window strategy. Shall display an alarm if door/window is open and thus heating/cooling has stopped. DI-2 1. None: No function will be associated with the input (free input to be used for alarming or monitoring of a remote digital contact to be shared over a communications network). 2. (Door Dry) Door contact & Motion detector: This configuration is only functional if binary input #1 is set to Motion NO or Motion NC or a PIR accessory cover is used. When sequence is enabled, the occupancy shall be dictated through 2 inputs. Any motion detected shall set the zone to occupied status. The zone shall remain permanently in occupied mode until the door contact switch opens momentarily. The thermostat shall then go in stand-by mode. If more movements are detected, the occupied mode shall resume. While the door is opened, any movements detected by the remote PIR sensor or the PIR accessory cover shall be ignored. 3. Remote Override: Temporary occupancy remote override contact. Local keypad override shall be disabled. Override function shall be controlled only by a manual remote toggle signal. 4. Filter: A backlit flashing Filter alarm shall be displayed on the local thermostat LCD screen when input (from a differential pressure switch) is energized. 5. Service: A backlit flashing Service alarm shall be displayed on the local thermostat LCD screen when input (ex. rooftop unit malfunction) is energized. UI-3 1. None: No function will be associated with the input (free input to be used for monitoring of a remote 10k type II thermistor (discharge air, outside air, return air etc.) to be shared over a communications network) 2. COC/NH: Change over dry contact - Normally Heat: For two-pipe systems 3. COC/NC: Change over dry contact - Normally Cool: For two-pipe systems 4. (COS): Change over analog sensor: For two-pipe systems 5. (SS) Supply air sensor monitoring: Used for supply air temperature monitoring.

3 Thermostat shall be provided with six unique sequences to meet the needs of most zone temperature control applications. Sequence Mode Menu 0 = Cooling only Off - Cool 1 = Heating only Off - Heat 2 = Cooling with reheat Off Auto Heat Cool 3 = Heating with reheat Off - Heat 4 = Cooling and Heating (2 modulating outputs) Off Auto Heat Cool 5 = Cooling / Heating (2 modulating outputs) Off Auto Heat Cool with reheat Thermostat shall be pre-programmed, containing all required I/O to accomplish local HVAC temperature control. Thermostats shall be provided with intelligent HMI, to which will display services only as are available as switched through local digital input or network layer such as: Outdoor air temperature display only enabled when outdoor air temperature network variable is received. Stand-by time and Stand-by setpoint parameters available only when VI- PIR cover is connected. COM Address and various other parameters when a communication module is integrated inside the unit. VI-PIR Viconics Passive Infrared Cover Thermostat shall be supplied with (or capable of being retrofitted on site) with the VI-PIR cover. Passive infrared sensor shall be integrated into the cover of the thermostat. Controls with remote motion detectors are not acceptable. VI-PIR shall add a third level of occupancy, Stand-by in between Occupied and Unoccupied. Thermostat shall have an adjustable Stand-by timer integrated to change the occupancy mode from Occupied to Stand-by if no motion is detected. Additionally, the thermostat shall drop from Stand-by mode to Unoccupied if no motion is detected for a certain amount of time during Stand-by mode. Both timers are adjustable. Stand-by mode shall have adjustable heating and cooling setpoints. Stand-by setpoints are intended to be set a few degrees less or more than Occupied setpoints to ensure a quick recovery to Occupied setpoints when motion is detected. Controls with motion detectors that only switch from Unoccupied mode to Occupied mode without a stand-by mode are not acceptable. Thermostats shall be Viconics, model VT7200x5x00x

4 Objects Table BACnet Wireless Object Name Type and Instance VT7200C5000B VT7200F5000B Type and Instance VT7200C5x00W VT7200F5x00W Room Temperature AV 7 (R,W) AV xx (R,W) Room Temp Override BV 8 (R,W) Outdoor Temperature AV 9 (R,W) AV xx (R,W) AUX Output BV 49 (R,W) Sequence of Operation MV 41 (R,W) MV xx (R,W) System Mode MV 14 (R,W) MV xx (R,W) Occupancy Command MV 13 (R,W) MV xx (R,W) Control Output GRP 57 (R) PI Heating Demand AV 58 (R) AV xx (R) PI Cooling Demand AV 59 (R) AV xx (R) Supply Temperature AI 12 (R) AV xx (R,W) HeartbeatDelay AV xx (R) Controller Status GRP 65 (R) AUX Status BI 69 (R) BV xx (R) Heating Valve Status MV 70 (R) Cooling Valve Status MV 71 (R) BI 1 Status BI 66 (R) BV xx (R) BI 2 Status BI 67 (R) BV xx (R) UI 3 Status BI 68 (R) BV xx (R) Local Motion BI 73 (R) Effective Occupancy MV 74 (R) MV xx (R) PIRmotionStatus BV xx (R) Controller Alarms GRP 61 (R) Window Alarm BI 62 (R) Filter Alarm BI 63 (R) Service Alarm BI 64 (R) Alarms MV xx (R) Temperature Setpoints GRP 50 (R) Occupied Heat Setpoint AV 51 (R,W) AV xx (R,W) Occupied Cool Setpoint AV 52 (R,W) AV xx (R,W) Stand-by Heat Setpoint AV 55 (R,W) AV xx (R,W)

5 Object Name BACnet Type and Instance Wireless Stand-by Cool Setpoint AV 56 (R,W) AV xx (R,W) Unoccupied Heat Setpoint AV 53 (R,W) AV xx (R,W) Unoccupied Cool Setpoint AV 54 (R,W) AV xx (R,W) Keypad Lockout MV 42 (R,W) MV xx (R,W) General Options 1 GRP 16 (R) BI 1 Configuration MV 17 (R,W) BI 2 Configuration MV 18 (R,W) UI 3 configuration MV 19 (R,W) Menu Scroll BV 20 (R,W) Temperature Scale BV 22 (R,W) Out#1 Config MV 23 (R,W) AUX Configuration MV 25 (R,W) General Options 2 GRP 26 (R) Heating Setpoint Limit AV 28 (R,W) Cooling Setpoint Limit AV 29 (R,W) Setpoint Type BV 30 (R,W) Temporary Occupancy Time MV 31 (R,W) Deadband AV 32 (R,W) Reheat Time Base BV 33 (R,W) Stand-by Time AV 34 (R,W) Unoccupied Time AV 35 (R,W) Output Options GRP 36 (R) VT7200C5000B Control type BV 37 (R,W) Floating Motor timing MV 38 (R,W) On Off Control CPH MV 39 (R,W) Direct Reverse Acting BV 40 (R,W) VT7200F5000B Type and Instance VT7200C5x00W VT7200F5x00W

6 ECHELON LONWORKS COMMUNICATING MODEL VT7200 Space Comfort Controller Object Type #8500 nvispacetemp Mandatory Network Variables nvospacetemp nvounitstatus SNVT_hvac_status nvioutdoortemp nvisetpoint nviauxheatenable SNVT_switch nvioccmancmd SNVT_occupancy nviapplicmode SNVT_hvac_mode nviheatcool SNVT_hvac_mode Optional Network Variables nvodischairtemp nvoeffectoccup SNVT_occupancy nvoterminalload SNVT_lev_percent Configuration Properties Send Heartbeat (mandatory) Temperature Setpoints (mandatory) Minimum Send Time (optional) Receive Heartbeat (optional) nviremlockout SNVT_count nviauxout SNVT_switch Manufacturer Network Variables nvosccstatus SNVT_state_64 Manufacturer Configuration Properties Please see the manual for details. Plug-In for configuration provided.

7 SNVTs 1 and SCPTs 2 Table Per Model No Sub Point Name VT7200C5000B VT7200F5000B 0 nvispacetemp X X 1 nvioutdoortemp X X 2 nvisetpoint X X 3 nvispacerh N/A N/A 4 nvifanspeedcmd N/A N/A 5 nviauxheatenable X X 6 nvioccmancmd X X 7 nviapplicmode X X 8 nviheatcool X X 9 nviremlockout X X 10 nvidhumilck N/A N/A 11 nviauxout X X 12 nvospacetemp X X 13 nvodischairtemp X X 14 nvospacerh N/A N/A 15 nvoeffectoccup X X 16 nvounitstatus X X 1 mode x x 2 heat_output_primary x x 4 cool_output x x 6 fan_output N/A N/A 7 in_alarm x x 17 nvosccstatus X X 1 StateTerminal BO2 x N/A 2 StateTerminal BO1 x N/A 3 StateTerminal BO4 x N/A 4 StateTerminal BO3 x N/A 5 StateTerminal BO5 x x 6 FanLow N/A N/A 7 FanMed N/A N/A 8 FanHigh N/A N/A 9 UI 3 Status x x 10 BI 2 Status x x 11 BI1 Status x x 12 Local PIR Motion x x 13 Service Alarm x x 14 Filter Alarm x x 15 Window Opened x x 16 Dehumidification Active N/A N/A 18 nvoterminalload X X No Sub Point Name VT7200C5000B VT7200F5000B 19 ncisetpts X X 1 occupied_cool x x 2 standby_cool x x 3 unoccupied_cool x x 4 occupied_heat x x 5 standby_heat x x 6 unoccupied_heat x x 20 ncirhmodel N/A N/A 1 RHdisplay N/A N/A 2 RHsetpoint N/A N/A 3 DehumHyst N/A N/A 4 DehumCool N/A N/A 5 RHcalib N/A N/A 21 ncigenopt X X 1 Control Type x N/A 2 Drive Time x N/A 3 Cycles Per Hour x N/A 4 Reverse Acting Output N/A x 5 BI1 x x 6 BI2 x x 7 UI3 x x 8 Menu Scroll x x 9 Auto Mode x x 10 Temperature Scale x x 11 Main out config x x 12 Sequence of Operation x x 13 Fan Menu Sequence N/A N/A 14 Heat Maximum setpoint x x 15 Cool Minimum setpoint x x 16 SetpointType x x 17 Temporary Occ Time x x 18 Deadband x x 19 Calibration Room x x Sensor 20 Auxiliary Contact Config x x 21 Reheat Time Base x x 22 Fan Mode N/A N/A 23 PIR Stand-By Timer x x 24 PIR Unoccupied Timer x x 22 ncisccmodel X X 1 Thermostat Model x x 2 Software Version x x 23 ncihvactype X X 24 ncisndhrtbt X X 25 nciminouttm X X 26 ncircvhrtbt X X 27 ncimajver X X 28 nciminver X X

0 C to 50 C ( 32 F to 122 F ) 0% to 95% R.H. non-condensing. 30 to 95% R.H. Dry contact across terminal BI1, BI2 & UI3 to Scom

0 C to 50 C ( 32 F to 122 F ) 0% to 95% R.H. non-condensing. 30 to 95% R.H. Dry contact across terminal BI1, BI2 & UI3 to Scom Viconics VT7350 Series PIR Ready Fan-coil Controllers General The VT7350 series are PIR Ready low-voltage microprocessor-based fan-coil controllers. Models are available controlling single speed and multi-speed