DUAL FUNCTION ROWING MACHINE SF-RW5612 USER MANUAL
|
|
- Wesley Lawrence
- 5 years ago
- Views:
Transcription
1 DUAL FUNCTION ROWING MACHINE SF-RW5612 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or SUNNY ( ).
2 IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk, or prevent you from using the equipment properly. Your physician s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level. 2. Be aware of your body s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or nauseous feeling. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program. 3. Keep children and pets away from the equipment. The equipment is designed for adult use only. 4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it. 5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/ or wear and tear. 6. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified. 7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment. 8. Do not place fingers or objects into the moving parts of the equipment. 9. The maximum weight capacity of this unit is 300 pounds (135 KG). 10. This equipment is not suitable for therapeutic use. 11. To avoid bodily injury and/ or damage to the product or property, proper lifting and moving are required. 12. Your product is intended for use in cool, dry conditions. You should avoid storage in extreme cold, hot, or damp areas as this may lead to corrosion and other related problems. 13. This equipment is designed for indoor and home use only; It is not intended for commercial use. 1
3 EXPLODED DRAWING 2
4 PARTS LIST No. Description Spec. QTY No. Description Spec. QTY 1 Left Chain Cover 673.7*671.2* Bearing RS 1 2 Pull Pin Φ4.5* C-Clip d Screw ST4.2*16*Φ Bearing RS 2 PT80*40*71.5*90*6 4 Adjustable End Cap 2 30 Belt Wheel Φ112* Screw ST4.2*19*Φ Bearing ф35*d17*16 1 Belt Wheel with 6 Inertial Wheel One Way Bearing 7 Handlebar Φ28*1.5* Bearing RS 1 8 Round End Cap Φ28* Right Chain Cover 673.7*671.2* Foam Grip Φ26*3* Computer 1 Tension Control 10 Washer d5*φ10* Knob Cover of Mesh Belt 11 C-clip d *100.1*57 1 Wheel Axle of Mesh Belt 12 Nut M10*1*H5*S Φ10*40*Φ6.1 2 Wheel 13 Wave Washer d10*φ13.5* Bolt M5*10*Φ Nut M5* Protective Ring Φ Adjusting Screw M6*40*Φ9* Trunk Wire 1 Length Pulley Φ45* Main Frame 1 43L/ Pedal with Pedal 17 Nut M6*H5*S *140*55 2 R Strap M12 *Φ12.5* Mesh Belt t1.5*22* Bolt 4 *S19 19 Belt 5PJ Nut M10*H9.5*S Fixing Axle for Mesh Belt Φ5* Pull Pin Φ8*95* Bearing RS 4 47 Washer d10*φ20* Volute Spring Φ12*104*M10* Bolt Cover *S Outer PC Board 1 49 Screw ST4.2*25*Φ Volute Spring t0.5*22* End Cap with PT80*40*71.5*90 Wheel (R) *65 (R) 1 25 Mesh Belt Wheel Axle Φ22* Bolt M8*55*20*S PC Board 1 52 Washer d8*φ16*
5 No. Description Spec. QTY No. Description Spec. QTY 53 Front Stabilizer 1 80 Foot Pad Φ38*10*M8* End Cap with PT80*40*71.5*90*6 Wheel (L) 5 (L) 1 81 Protective Ring Φ Adjusting Screw M6*40*Φ10* Bottom Fixed Piece 41.8*15* Adjusting U Seat 30*10* Cover of Fixed Piece 89.4*80* Nut M10*1*H7*S Screw M6*16*Φ Bolt M6*55*S Washer d6*φ12* Bearing Steel 1 86 Limit Mat Φ33*Φ8* PC Board 40*25* End Cap 96.6*40* Wheel 3 88 Upper Fixed Piece 80*44* Bearing 608RS 6 89 Bolt M8*75*13*S Magnet Φ15* Sensor Wire Length Left Seat Supporting Board 1 91 Limit Axle Φ12*80*M Right Seat Supporting Board 1 92 Battery 2 66 Nut M8*H8*S Bolt M8*16*S Bolt M8* Spring Washer d Bolt M8*120* Seat 365* Spring Φ2.5*Φ16*65*N Nut M8*S Supporting Tube 1 97 Supporting Board 1 71 Upper Right Non-Slip Mat t1.0*148.1* Rear Stabilizer 1 72 Right Foot Plate t3.0*232* Sliding Rail 80*40* Right Non-Slip Mat t1.0*148.1* Nut Board t5.0*12* Bottom Fixed Plate t3.0*60* Bolt M6*12*Φ Spring Washer d End Cap 80*40* Bolt M6*16*S Screw M8*20*S Left Non-Slip Mat t1.0*148.1* Spanner S= Left Foot Plate t3.0*232* Allen Wrench S Upper Left Non-Slip Mat t1.0*148.1*
6 HARDWARE PACKAGE Ordering Replacement Parts (U.S. and Canadian Customers only) Please provide the following information in order for us to accurately identify the part(s) needed: The model number (found on cover of manual) The product name (found on cover of manual) The part number found on the EXPLODED DIAGRAM and PARTS LIST (found near the front of the manual) Please contact us at or SUNNY ( ). 5
7 ASSEMBLY INSTRUCTIONS STEP 1: Attach the Front Stabilizer (No. 53) to the Main Frame (No. 42) using 2 Bolts (No. 51) and 2 Washers (No. 52). Tighten and secure with Allen Wrench (No. 105). STEP 2: Fix the 2 Bolts (No. 44) into the bottom hole in position A of Main Frame (No. 42) with Spanner (No.104). Insert the 2 Bolts (No. 44) through the Pedals (No. 43L/R) into the upper hole in position B of the Main Frame (No. 42) and tighten with Spanner (No.104). NOTE: The Pedals (No. 43L/R) should rest on the Bolts (No. 44) that are in position A 6
8 ASSEMBLY INSTRUCTIONS STEP 3: Insert the Seat (No. 95) into the Sliding Rail (No. 99). Insert the Limit Axle (No. 91) into the hole on the back of the Sliding Rail (No. 99). Attach the Limit Mat (No. 86) onto the Limit Axle (No. 91) using 1 Screw (No. 84) and 1 Washer (No. 85), then tighten with Spanner (No. 104). STEP 4: Attach the Sliding Rail (No. 99) onto the Rear Stabilizer (No. 98) using 4 Screws (No. 103), 4 Spring Washers (No. 94), and 4 Washers (No. 52). Tighten and secure with Allen Wrench (No. 105). 7
9 ASSEMBLY INSTRUCTIONS STEP 5: Attach the Sliding Rail (No. 99) to the bolt of the Main Frame (No. 42), then insert the Pull Pin (No. 46). Connect Trunk Wire 1 (No. 41) with the Sensor Wire (No. 90). Your rowing machine is now assembled. 8
10 ASSEMBLY INSTRUCTIONS This rowing machine has dual functions. You can row while seated or you can stand on the Foot Plates (No. 72 & 78) and pull the handlebar up vertically, giving you more options to exercise your arms and upper body. To use for standing exercises, turn Right Foot Plate (No. 72) clockwise and turn Left Foot Plate (No. 78) counterclockwise (as the left picture shown) to the widest angle. Note: when used for standing exercises, please turn Pedals (No. 43L/R) to the position as the left picture shown. To use the machine as rowing machine, turn Right Foot Plate (No. 72) counterclockwise and the Left Foot Plate (No. 78) clockwise, back to center. Note: when used as rowing machine, please turn back Pedals (No. 43L/R) to position as the left picture shown. 9
11 ADJUSTMENT GUIDE CAUTION! Moving parts, such as the seat, can crush and cut. Keep hands clear of the sliding rail during use! PEDAL STRAP ADJUSTMENT The pedal strap is adjustable and can be personalized to fit the user s foot size. MOVING THE MACHINE To move the machine, lift the rear stabilizer until the transportation wheels on the front stabilizer touch the ground. With the wheels on the ground, you can transport the rower to the desired location with ease. ADJUSTING THE BALANCE Adjust the Adjustable End Caps (No. 4) on the rear stabilizer of the machine if the machine is unbalanced during use. ADJUSTING THE RESISTANCE Rotate the Tension Control Knob (No. 36) clockwise to increase the level of resistance. Rotate the tension control counter-clockwise to decrease the level of resistance. Tension levels are set at Level 1 being the lowest and Level 8 being the highest REPLACE THE BATTERIES Two AAA batteries are included in Computer (No. 35). To replace the batteries, remove Computer (No. 35) from Main Frame (No. 42), and disconnect the Trunk Wire 1 (No. 41) and the wire of Computer (No. 35). Replace both batteries. Do not mix battery types and do not mix old and new batteries. After the replacement, connect Trunk Wire 1 (No. 41) to the computer wire and put Computer (No. 35) back onto the Main Frame (No. 42). Dispose or recycle batteries according to your state and local rules. 10
12 EXERCISE METER Our computer on the Dual Function Rowing Machine allows the user to tailor a personalized workout by monitoring their progress. During a workout, the computer will alternately and repeatedly display your Time, Count, Calories Burned, Total Count, and Scan (all of the above). With our easy-to-use computer, the user can efficiently track their fitness improvements from one workout to the next. FUNCTION KEY: MODE: To select your specification mode and/or turn on computer. SET: To set a value of Time or Calories (when not in Scan mode). RESET: Press to reset Time or Calories. FUNCTIONS AND OPERATIONS: SCAN: Press MODE button until SCAN appears. The computer will rotate through the five functions in the following order: TIME, COUNT, CALORIES, and TOTAL COUNT. Each function will display for 6 seconds. TIME: Counts the total time elapsed during your current workout. COUNT: Counts the number of rowing strokes from your current workout. CAL: Counts the total calories burned from current workout. TOTAL COUNT: Counts the total amount of strokes from the first use. AUTO ON/OFF: The power will turn off automatically once there s no activity for 4 minutes. The meter will reactivate once the machine is put into motion or when you press a button. SPECIFICATIONS SCAN Every 6 seconds TIME 0:00~99:59 (Minute:Second) FUNCTIONS COUNT 0~9999 Count CALORIES 0.0~9999 Kcal TOTAL COUNT 0~9999 Count BATTERY TYPE (2)Two AAA or UM-4 OPERATING TEMPERATURE 0 C ~ 40 C STORAGE TEMPERATURE -10 C ~ 60 C Version 3.1
MAGNETIC ROWING MACHINE SF-RW5515 USER MANUAL
MAGNETIC ROWING MACHINE SF-RW5515 USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
More informationFULL MOTION MAGNETIC ROWING MACHINE SF-RW5624 USER MANUAL
FULL MOTION MAGNETIC ROWING MACHINE SF-RW5624 USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please
More informationMAGNETIC ROWING MACHINE SF-RW5634 USER MANUAL
MAGNETIC ROWING MACHINE SF-RW634 USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
More informationMAGNETIC ELLIPTICAL TRAINER
MAGNETIC ELLIPTICAL TRAINER SF-RW5864 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL
More informationPINK MAGNETIC RECUMBENT BIKE
PINK MAGNETIC RECUMBENT BIKE P8400 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL
More informationDUAL FUNCTION MAGNETIC ROWING MACHINE
DUAL FUNCTION MAGNETIC ROWING MACHINE SF-RW5622 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT
More informationMAGNETIC ELLIPTICAL TRAINER
MAGNETIC ELLIPTICAL TRAINER SF-E3609 USER MANUAL IMPORTANT: Please read this manual carefully before using the product. Retain owner s manual for future reference. For Customer Service, please contact:
More informationMAGNETIC UPRIGHT BIKE WITH TABLET HOLDER SF-B2511H USER MANUAL
MAGNETIC UPRIGHT BIKE WITH TABLET HOLDER SF-B2511H USER MANUAL IMPORTANT: Please read this manual carefully before using the product. Retain owner s manual for future reference. For Customer Service, please
More informationIndoor Cycling Exercise Bike
Indoor Cycling Exercise Bike Model No. P8100 & SF-B1203 IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE BIKE. For Customer Service, please contact: support@sunnyhealthfitness.com IMPORTANT
More informationELASTIC CORD ROWING MACHINE SF-RW5606 USER MANUAL
ELASTIC CORD ROWING MACHINE SF-RW5606 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact:
More informationPink Magnetic Elliptical Bike
Pink Magnetic Elliptical Bike Model No. P8300 IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE BIKE. For Customer Service, please contact: support@sunnyhealthfitness.com IMPORTANT SAFETY INFORMATION
More informationMAGNETIC ELLIPTICAL TRAINER SF-E3416 USER MANUAL
MAGNETIC ELLIPTICAL TRAINER SF-E3416 USER MANUAL IMPORTANT: Please read this manual carefully before using the product. Retain owner s manual for future reference. For Customer Service, please contact:
More informationElliptical Stepper Bike (100942)
Elliptical Stepper Bike (1009) IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference IMPORTANT SAFETY INFORMATION We thank you for choosing our
More informationR-1 ROWING MACHINE OWNER S MANUAL
R-1 ROWING MACHINE OWNER S MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner s manual for future
More informationMAG Rowing Machine. Art No. GK713. Owner s Manual
MAG Rowing Machine Art No. GK713 Owner s Manual Safety Instructions To ensure the best safety of the exerciser, regularly check it on damages and worn parts. If you pass on this exerciser to another person
More informationCROSS TRAINING MAGNETIC RECUMBENT BIKE
CROSS TRAINING MAGNETIC RECUMBENT BIKE SF-RB4708 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please
More informationUSER S MANUAL Taurus Racing Bike Z9 Pro TF-Z9-PRO
USER S MANUAL Taurus Racing Bike Z9 Pro TF-Z9-PRO 1 Safety Instructions To ensure the best safety of the exerciser, regularly check it on damages and worn parts. If you pass on this exerciser to another
More informationSafety Instructions. Do not work out immediately after meals!
Safety Instructions To ensure the best safety of the exerciser, regularly check it for damage and worn parts. If you pass on this exerciser to another person or if you allow another person to use it, make
More informationFront Drive Elliptical Model No: E750
BODY WORX Front Drive Elliptical Model No: E750 Retain this owner s manual for future reference Read and follow all instructions in this owner s manual Version A 1 Safety Instructions To ensure the best
More informationIRONMAN Recumbent Bike with Bluetooth
OWNER S MANUAL IRONMAN Recumbent Bike with Bluetooth Model 6155 The specifications of this product may vary from this photo and are subject to change without notice. IRONMAN, IRONMAN TRIATHLON and M-DOT
More informationERG400 ROWER OWNER S MANUAL PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW ROWER
ERG400 ROWER OWNER S MANUAL PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW ROWER Congratulations On Your New Rower and Welcome to the XTERRA Fitness Family! Table Of Contents XTERRA
More informationhumantouch.com use & care manual
800.355.2762 2010 Human Touch, LLC. Patents pending and intellectual property rights enforced. No medical claims are warranted or implied by the use of this product. Human Touch is a trademark of Human
More informationEZ STRIDE MOTORIZED ELLIPTICAL
EZ STRIDE MOTORIZED ELLIPTICAL SF-E3626 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN
More informationRevision 3. April Owner s Manual. Serial Number Here. Date of Purchase
Revision 3 April 2012 Owner s Manual Serial Number Here Date of Purchase www.batcafitness.com 1207 New Hope Road, Raleigh, NC - 919.255.1233 Omega 4 Owner s Manual - www.batcafitness.com Instructions Congratulations
More informationRevision 2. October Owner s Manual. Serial Number Here. Date of Purchase
Revision 2 October 2013 Owner s Manual Serial Number Here Date of Purchase www.batcafitness.com 1207 New Hope Road, Raleigh, NC - 919.255.1233 Omega 2 Owner s Manual - www.batcafitness.com Instructions
More informationMulti-Angle Utility Bench
Multi-Angle Utility Bench MPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product may vary from this photo
More informationXC-18. NOTE: *Machine shown without Lift-Up Safety Guard. This guard is included with machine. Machine should not be operated without this guard.
XC-18 NOTE: *Machine shown without Lift-Up Safety Guard. This guard is included with machine. Machine should not be operated without this guard. EXTREMA MACHINERY COMPANY, INC. PO BOX 1450, ALBANY, LOUISIANA
More informationUser s Manual and Operating Instructions
User s Manual and Operating Instructions Model Numbers: PT-18W-DDF-A, PT-20F-DDF-A, PT-20S-DDF, PT-24O-DDF, PT-24-DDF, PT-24-DDF-F, PT-30-DDF, PT-30P-DDF-A, PT-30P-DDF-AF READ AND SAVE THESE INSTRUCTIONS
More informationPanel Fan Series Operators Manual (Galvanized and Polymer)
Panel Fan Series Operators Manual (Galvanized and Polymer) 52" Belt Drive, Galvanized Panel Fan with Three Wing Blade IMPORTANT: READ AND SAVE THESE INSTRUCTIONS Read all instructions carefully before
More informationSC250X FLOOR GRINDER OPERATIONS MANUAL
Unit 4/1 Rocklea Drive Port Melbourne Vic 3207 1300 109 108 www.traxxcp.com.au SC250X FLOOR GRINDER OPERATIONS MANUAL The contents of this Operations Manual are the copyright of the publisher and may not
More informationTornado Operations & Maintenance Manual
TORNADO INDUSTRIES, LLC 7401 W. Lawrence Avenue Chicago, IL 60706 Ph (708) 867-5100 Fax (708) 867-6968 www.tornadovac.com Tornado Operations & Maintenance Manual MODEL NO. 99410 BR 13/1MW L9735Rev_C Tornado
More informationCLUB SERIES ADJUSTABLE AB BENCH
CLUB SERIES ADJUSTABLE AB BENCH ASSEMBLY INSTRUCTIONS Part # 73030 Rev C. Revision: /8/0 PARTS LIST KEY 3 5 6 7 8 9 0 PART # AP0-003 P0-00 AP0-00 AP0-00 AP0-003 P07-0005 P07-000 AP0-003 DAC038706NU DAC0380686NU
More informationOperation and Safety Manual ABSPMS-80L and ABSPMS-80/60L
Operation and Safety Manual ABSPMS-80L and ABSPMS-80/60L Serial Number: Model: ABSPMS-80L American Baking Systems 290 Legion Court S.W. Cedar Rapids, IA 52404 www.abs1.net OPERATION MANUAL AND PARTS LIST
More informationUser Guide Ted's Tumbler Model 2
User Guide Ted's Tumbler Model 2 CAUTION: READ ALL INSTRUCTIONS BEFORE USING TUMBLER. Changes from Version 1: Version 2 is essentially identical to version 1 except for the addition of belt guards and
More informationPANEL FAN SERIES OPERATORS MANUAL (Galvanized and Polymer)
PANEL FAN SERIES OPERATORS MANUAL (Galvanized and Polymer) Galvanized Panel Fan IMPORTANT: READ AND SAVE THESE INSTRUCTIONS Read all instructions carefully before attempting to assemble, install, operate
More informationIMAGE V. Parts and Service Manual
IMAGE 0V Section II Parts and Service Manual (88B) CLARKE TECHNOLOGY Image Operator's Manual Page AUTHORIZED PERSONNEL MAINTENANCE To Access Pump Motor. Remove brush housing from machine. See "Brush Motor
More information3HP MOBILE CYCLONE DUST COLLECTOR MANUAL FILTER CLEANING MANUAL
3HP MOBILE CYCLONE DUST COLLECTOR MANUAL FILTER CLEANING MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA
More information2HP MOBILE CYCLONE DUST COLLECTOR MANUAL
HP MOBILE CYCLONE DUST COLLECTOR MANUAL MANUAL FILTER CLEANING LAGUNA TOOLS 07 Alton Parkway Irvine, California 9606 Ph: 800.3.976 www.lagunatools.com 08, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo
More informationHEAVY-DUTY WELDING CART USER S MANUAL
HEAVY-DUTY WELDING CART USER S MANUAL WARNING: Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety precautions
More information57" Fiberglass Exhaust Fan with Cone
OPERATORS MANUAL Fiberglass Exhaust Fan IMPORTANT: READ AND SAVE THESE INSTRUCTIONS Read all instructions carefully before attempting to assemble, install, operate or service the product described. Failure
More information10 and 12 Meat Slicer MS250 & MS300 Operating Manual
10 and 12 Meat Slicer MS250 & MS300 Operating Manual Introduction Thank you for purchasing a Pantheon Catering Equipment product. In this booklet you will find instructions for safe operation so please
More informationFly / Rear Deltoid. Owners Manual
Owners Manual . Assembly Instructions Item Qty Description Part Number Item Qty Description Part Number Front Upright AAP04-0746 (WHT)(PLT) 7 Weight Stack Pin P-0048 Tower AP04-0745 (WHT)(PLT) 8 Center
More informationSuperKlean Washdown Products
DURAREEL DR8 & DR8S INSTALLATION AND MAINTENANCE INSTRUCTIONS **DO NOT THROW AWAY AFTER INSTALLATION** **SAVE AND DISPLAY PROMINENTLY WHERE THIS EQUIPMENT IS USED** GENERAL WARNINGS High pressure and hot
More informationAXIS Bodyweight Trainer Owner's Manual
Revision 0 June 2018 Bodyweight Trainer Owner s Manual Serial Number Here Date of Purchase www.batcafitness.com AXIS Bodyweight Trainer Owner's Manual Congratulations on the purchase of your new Batca
More informationUser s Manual and Operating Instructions
User s Manual and Operating Instructions Model Numbers: MAC-12F, MAC-20F-DDF, MAC-20FO-DDF, MAC-20S-DDF, MAC-24-DDF, MAC-24P, MAC-24POSC, MAC-24W, MAC-24WOSC, MAC-30W, MAC-30WOSC, MAC-30-DDF, MAC-30P-DDF,
More informationHanson LED C e i l i n g F a n
Hanson LED C e i l i n g F a n model no. 052-8398-2 Toll-free 1-866-827-4985 IMPORTANT: For your safety please read and understand this manual before installing or operating this product. OWNER S MANUAL
More informationIronman X- Class 410 Recumbent Bike with Bluetooth
OWNER S MANUAL Ironman X- Class 410 Recumbent Bike with Bluetooth Model 6152 The specifications of this product may vary from this photo and are subject to change without notice. IRONMAN, IRONMAN TRIATHLON
More informationCNR-SW1 Manual v1.0. Canyon SportMaster
CNR-SW1 Manual v1.0 Canyon SportMaster INTRODUCTION WARNUNG :Always consult your physician before starting a fitness programme. A pulse computer is not a medical device. It is a training tool designed
More informationMODEL X-150D SUB-ASSEMBLY PARTS LIST REV. 02/27/04
MODEL X-D SUB-ASSEMBLY PARTS LIST REV. 0//0 MAINFRAME ASSEMBLY X-D DECO ITEM PART NUMBER DESCRIPTION QTY 0 --0-00 Mainframe, X ---00 Rollcage, X -0-00-0 HHB, /-0 x / -G0-0- HHB, /- x / -0-00-0 HHB, /-0
More informationAXIS Freeweight Rack Owner's Manual
Revision 0 June 2018 Freeweight Rack Owner s Manual Serial Number Here Date of Purchase www.batcafitness.com AXIS Freeweight Rack Owner's Manual Page Instructions 2 Tools Required/Hardware 3-4 AXIS Floor
More informationPanel Fan Series Operators Manual (Galvanized and Polymer)
Panel Fan Series Operators Manual (Galvanized and Polymer) Galvanized Panel Fan with Three Wing Blade IMPORTANT: READ AND SAVE THESE INSTRUCTIONS Read all instructions carefully before attempting to assemble,
More informationFD 90 / FD 95 Rotary Perforators
FD 90 / FD 95 Rotary Perforators 11/2018 OPERATOR MANUAL SECOND EDITION TABLE OF CONTENTS SPECIFICATIONS 1 SAFETY PRECAUTIONS 1 DESCRIPTION 2 INSTALLATION AND OPERATION 3 INFEED TABLE ADJUSTMENT 3 OUTFEED
More informationASTRO ENVELOPE FEEDER AMC FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS
ASTRO ENVELOPE FEEDER AMC-2000-17 FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS INTRODUCTION Thank you for purchasing the Astro Envelope Feeder. It is fast, efficient, reliable, and
More informationkéìíê~=iqd=qìåöëíéå=dêáåçéê= lééê~íáçåë=j~åì~ä=
NJUMMJVQQJOOQP ïïïk~êåjòçåékåçã kéìíê~iqdlééê~íáçåëj~åì~ä m^dbnlcnm kéìíê~iqdqìåöëíéådêáåçéê lééê~íáçåëj~åì~ä ^o`jwlkbk`lj IfåÅ. OMVNi~ëm~äã~ëaêáîÉpíÉK` `~êäëä~çi`^vomnnjnrrn qéäwtsmkvpnknrmm UMMKVQQKOOQP
More informationOperator and Parts Manual Nu-1600 Burnisher, Belt Drive Nu-2000 Burnisher, Belt Drive
Operator and Parts Manual Nu-1600 Burnisher, Belt Drive Nu-2000 Burnisher, Belt Drive NuSource Enterprises, LLC; A 4699 61 st St. Suite C; Holland, MI 49423 Length 33.75 in. Width 21 in. Height 50 in.
More information7165 Dust Collector Owner s Manual
7165 Dust Collector Owner s Manual Oliver Machinery M-7165 12/2016 Seattle, WA Copyright 2003-2017 info@olivermachinery.net www.olivermachinery.net CONTENTS IMPORTANT SAFETY RULES----------------------------------------------------------------
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL 2 General Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious
More informationhome use only in accordance with the instructions provided in this manual. Please read these instructions carefully and retain for future use
INSTRUCTION MANUAL MODEL NUMBER: NJD-C-06I WARNING: To reduce risk of injury, the user must read and understand this instruction manual before using the Vibrapower Cordless Belt. This machine is intended
More informationDeluxe Welding Tool Chest
Deluxe Welding Tool Chest Item# 9002166 OPERATOR S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety
More informationDUST EXTRACTOR INSTRUCTION MANUAL. 550W (3/4 HP) INDUCTION MOTOR 1850W AUTOMATIC POWER OUTLET 65L COLLECTION BAG ø100mm X 2.
KNOW YOUR PRODUCT DUST EXTRACTOR 550W (3/4 HP) INDUCTION MOTOR 1850W AUTOMATIC POWER OUTLET 65L COLLECTION BAG ø100mm X 2.5M SUCTION HOSE INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions.
More informationDacor Technical Service
Attention: This manual is just a section from the complete Wall Oven Service Manual. If you find that you require the complete service manual, which includes exploded views and parts, use and care information
More information4 TON HYDRAULIC FLOOR PRESS INSTRUCTION MANUEL
4 TON HYDRAULIC FLOOR PRESS INSTRUCTION MANUEL Make sure read and fully understand the instruction manual before using the product IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFETY INSTRUCTIONS
More information5HP CYCLONE DUST COLLECTOR MANUAL
5HP CYCLONE DUST COLLECTOR MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo are the registered trademarks
More informationEAGLE 2000B EAGLE 2000BE EAGLE 2000EBT MUST READ MANUAL PRIOR TO INSTALLING MACHINE
EAGLE 2000B EAGLE 2000BE EAGLE 2000EBT MUST READ MANUAL PRIOR TO INSTALLING MACHINE Contents 1 Machine Safety Information 3 1.5 Safety Precautions Prior to Operating Machine 6 2 Machine Installation 7
More informationPump Out Vacuums Polyethylene & Steel
Pump Out Vacuums Polyethylene & Steel Operations and Parts Manual 110 volt receptacle on single motor only Models: 415P-AD 429P-AD 415DS IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance,
More informationSD2000 FLOOR BURNISHER
SD2000 FLOOR BURNISHER OPERATION & PARTS MANUAL REV A April 2003 SPECIFICATIONS Length: 33.75 inches Width: 2 inches Height: 50 inches Weight: 69 pounds Pad Speed: 2000 Pad Diameter: 20 inches Drive Motor:.5
More informationVIPER VENOM HIGH SPEEDS OWNERS MANUAL. IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! VN1500 SERIAL# MODEL#
VIPER VENOM HIGH SPEEDS www.usviper.com OWNERS MANUAL IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! MODEL# VN1500 SERIAL# VIPER...exceptional value REV.06(2014-9)
More informationGETTING STARTED OPTIONAL HARDWARE A
ROLLER SHADES Continuous Cord Loop and Link System without Cassette Double Roller GETTING STARTED OPTIONAL HARDWARE A few simple tools are required: Hold Down Brackets Spacer Block Spacers Steel Tape Measure
More informationIndustrial Sewing Machine TECHNICAL MANUAL SEWING MACHINE HEAD. Electronic Pattern Sewing Machine. Model PLK-G1010 A180E593P03
Industrial Sewing Machine TECHNICAL MANUAL SEWING MACHINE HEAD Electronic Pattern Sewing Machine Model PLK-G1010 A180E593P03 FOR SAFE USE Before the installation, operation, and inspection for this product,
More informationMK-100 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-00 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space
More informationTCUT10UL 2.5 HP 10 Tile Saw Assembly & Operating Instructions
TCUT10UL 2.5 HP 10 Tile Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance.
More informationClosomat Lima Vita installation & user guide
Closomat Lima Vita installation & user guide design manufacture supply install service recycle Technical data The Closomat toilet MUST be installed by a competent or qualified person. Explanation of symbols
More informationD14 & D18 Upright Vacuum
Operator's Manual D14 & D18 Upright Vacuum READ THIS BOOK This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting
More informationOperating Instructions Pigeon - Clay target launcher
Operating Instructions Pigeon - Clay target launcher Specifications: Single column 50 target hopper. Throwing distance: 60 yards Weight: 25kg / 55 lbs Length: 1200mm / 47 Width: 560mm / 22 Height: 960mm
More information1500 RPM BURNISHER. Model P WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT.
OPERATOR S MANUAL & PARTS LIST 1500 RPM BURNISHER Model P1500-3 U.S. Patent Number 4,845,798 U.S. Patent Number 4,756,042 U.S. Patent Number 296,252 WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL
More informationBARRACUDA DUAL MOTOR VACUUM OWNERS MANUAL. IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! CUDA26 MODEL# SERIAL#
www.usviper.com BARRACUDA DUAL MOTOR VACUUM OWNERS MANUAL IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! MODEL# SERIAL# CUDA26 VIPER NORTH AMERICA P.O. BOX 104 HAMILTON,
More informationHIGH SPEED BURNISHER OWNERS MANUAL
HIGH SPEED BURNISHER OWNERS MANUAL IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! MODEL# TP1500 SERIAL# REV.00(09-08) VF53023TP TABLE OF CONTENTS Safety Precautions
More informationOWNER S MANUAL IMPORTANT: READ OWNER S MANUAL CAREFULLY
Shovelnose Wet & Dry Vac OWNER S MANUAL IMPORTANT: READ OWNER S MANUAL CAREFULLY Please fill out and return your warranty card MODEL 261750 082713 TABLE OF CONTENTS CONGRATULATIONS on your purchase of
More informationTABLE OF CONTENTS
TABLE OF CONTENTS Safety Precautions Machine Operation Machine Maintenance & Storage Handle Release Assembly Instructions Parts Lists Wiring Diagram Warranty Policy 3 4 4 5 6-10 11 12-2- SAFETY PRECAUTIONS!!!
More informationOPERATOR S MANUAL & PARTS LIST Ultra High Speed Burnishers
OPERATOR S MANUAL & PARTS LIST Ultra High Speed Burnishers 1200 RPM Model M1200-3 1600 RPM Model M1600-3 2000 RPM Model M2000-3 U.S. Patent Number 4,845,798 U.S. Patent Number 4,756,042 U.S. Patent Number
More informationIndustrial Sewing Machine TECHICAL MANUAL SEWING MACHINE HEAD. Electronic Pattern Sewing Machine. Model PLK-G1010 A180E593P02
Industrial Sewing Machine TECHICAL MANUAL SEWING MACHINE HEAD Electronic Pattern Sewing Machine Model PLK-G1010 A180E593P02 FOR SAFE USE Before the installation, operation, and inspection for this product,
More informationFloor Standing Bath Shower Mixer. Fitting instructions. Please keep these instructions for future reference and request of replacement parts.
Floor Standing Bath Shower Mixer Fitting instructions Please keep these instructions for future reference and request of replacement parts. We have taken great care to ensure that this product reaches
More information- website: Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire WR9 0QH, UK
V-026PT User Guide.qxd 7/9/06 15:13 Page 12 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the product V-026PT is manufactured in compliance
More informationRemoval. CAUTION: Do not let tensioner arm snap back to the freearm position, sever damage may occur to the tensioner.
Removal 3.7L/4.7L ENGINE CAUTION: Do not let tensioner arm snap back to the freearm position, sever damage may occur to the tensioner. 1. Disconnect negative battery cable from battery. 2. Rotate belt
More informationUser s Manual and Operating Instructions
User s Manual and Operating Instructions Model Numbers: CL-30P-DDF, CL-20F-DDF, CL-24O-DDF, CL-30-DDF READ AND SAVE THESE INSTRUCTIONS IMPORTANT: Read and understand all of the directions in this manual
More informationAUTO SPEED BLENDER INSTRUCTION MANUAL MODEL: BLCLMB1
AUTO SPEED BLENDER INSTRUCTION MANUAL MODEL: BLCLMB1 1 TABLE OF CONTENTS IMPORTANT SAFEGUARDS 3 POLARIZED PLUG 4 PRODUCT DIAGRAM 5 USAGE INSTRUCTIONS PREPARING YOUR AUTO SPEED BLENDER FOR USE 6 HOW TO
More informationMarley X7 Fan USER MANUAL DESIGNED FOR INDUCED-DRAFT COOLING TOWER APPLICATIONS
USER MANUAL Marley X7 Fan DESIGNED FOR INDUCED-DRAFT COOLING TOWER APPLICATIONS M2010-1234A ISSUED 3/2012 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. Fan Components 1
More informationMNEFDD54 & MNBCDD54 GALVANIZED WALL FANS Installation, Operation, and Maintenance Instructions
FARM PRODUCTS DIVISION MEMBER OF AMCA AMERICAN COOLAIR CORPORATION P.O. BOX 2300 JACKSONVILLE, FLORIDA 32203 PHONE (904) 389-3646 FAX (904) 387-3449 E-MAIL - fans@coolair.com MNEFDD54 & MNBCDD54 GALVANIZED
More informationATTENTION TROUBLESHOOTING. Before using. Preparation. How to Operate. Other materials CONTENT OTHER MATERIALS
CONTENT OTHER MATERIALS TROUBLESHOOTING Before using Name of Parts...2 S.N Fault How to solve the problem How to Use the Power Switch...2 Preparation Assembly Drawing of Electrically Operated Running Machine...3
More informationParts and Service Manual
Section II Parts and Service Manual (70241A) CLARKE TECHNOLOGY Operator's Manual - MINI MAX Page -29- Frame and Front Cover Assembly Drawing 2/01 Page -30- CLARKE TECHNOLOGY Operator's Manual -MINI MAX
More informationINSTALLATION INSTRUCTIONS. WOOD BLINDS 1-3/8, 2 and 2-3/8 SLAT SIZES. COMPOSITE FAUX WOOD BLINDS 2 and 2-1/2 SLAT SIZES
INSTALLATION INSTRUCTIONS WOOD BLINDS 1-3/8, 2 and 2-3/8 SLAT SIZES COMPOSITE FAUX WOOD BLINDS 2 and 2-1/2 SLAT SIZES POLYMER FAUX WOOD BLINDS 2 and 2-1/2 SLAT SIZES STANDARD CORDLESS LIFT Thank you for
More informationOwner s Guide and Installation Manual
Tribeca Owner s Guide and Installation Manual English Form# M6000-01 20120416 2012 Casablanca Fan Co. Welcome Your new Casablanca ceiling fan is an addition to your home or office that will provide comfort
More informationPlease read this manual before using the machine. Please keep this manual within easy reach for quick reference.
INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. HIGH SPEED SINGLE NEEDLE STRAIGHT LOCK STITCHER Thank you very much for
More informationPower Tower OWNER'S MANUAL
Power Tower OWNER'S MANUAL Model No. PTG Recreation Supply Inc. P.O. BOX BODYCRAFT is a division of Recreation Supply Sunbury, OH 7 MB BEFORE YOU BEGIN Congratulations and thank you for selecting the POWER
More informationROTARY TUMBLER LORTONE INSTRUCTIONS AND PARTS LIST. Model 3-1.5B. Model 45C. Model 33B Cyrus Way Mukilteo, WA (425)
ROTARY TUMBLER INSTRUCTIONS AND PARTS LIST Model 3-1.5B Model 45C Model 33B LORTONE 12130 Cyrus Way Mukilteo, WA 98275 (425) 493-1600 SETTING UP YOUR MACHINE For 45C Unit Only (33B & 3-1.5B already assembled)
More informationOscillating Belt/Spindle Sander 230V
Oscillating Belt/Spindle Sander 230V Model no: SM1300 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly
More informationBQ-260/260L. Important Information BOOK BINDER
BOOK BINDER BQ-260/260L Important Information - This manual is designed to help you to install, operate and maintain Perfect Binder BQ- 260/260L. Read, understand and keep this manual in a safe and convenient
More informationHIGH SPEED BURNISHER VF53023CP rev.01 ( ) MODE D L E # CPL C 1500H 0 S SERI R AL A #
MODEL# CPL1500HS SERIAL# TABLE OF CONTENTS Safety Precautions Machine Operation Machine Maintenance & Storage Handle Release Assembly Instructions Parts List Wiring Diagram 3 4 4 5 6-10 11 2 SAFETY PRECAUTIONS!!!
More informationPORT700CF Portable Fume Collector
11975 Portland Ave. S. Suite 104 Burnsville, MN 55337 Phone: 952-894-6637 Fax: 952-894-0750 Email: info@ventaire.com Website: www.ventaire.com PRODUCT GUIDE FOR PORT700CF Portable Fume Collector REV:110314
More information52 CEILING FAN READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V.
Irene 52 CEILING FAN READ AND SAVE THESE INSTRUCTIONS FAN RATING AC 120V. 60Hz TABLE OF CONTENTS Tools and Materials Required... 1 Package Contents... 1 Safety Rules... 2 Mounting Options... 3 Hanging
More information